| Age | Commit message (Collapse) | Author |
|---|
|
This adds pmc_dump_soc_qdf_info function and PMC_IPC_CMD_SOC_REG_ACC
PMC IPC Command to read and print Intel SoC QDF information using PMC
interface if SOC_QDF_DYNAMIC_READ_PMC is enabled. QDF read command is
supported from Panther Lake SoC.
QDF is a four digit code that can be used to identify enabled features
and capabilities. This information will be useful to debug issues
found during the development phase and in the field as well.
Change-Id: I927da1a97e6dad4ee54c4d2256fea5813a0ce43d
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83784
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the PSP NVRAM base and size to amdfwtool for all SoCs except Genoa
which doesn't use/support this. This was previously only implemented for
Picasso, but not for the SoCs that support this, so add the support to
those other SoCs as well.
If a mainboard has an section named 'PSP_NVRAM' in its FMAP file, the
start and length of it in the flash will be passed to amdfwtool which
then adds the base and length to the corresponding type 0x04 PSP
directory table entry.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I785ede8eb0df2473a4390b2c305add20f38d7ede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83814
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move PSP_NVRAM_BASE and PSP_NVRAM_SIZE from the BIOS directory table
items to the PSP Directory Table items, since the corresponding region
will be referenced by the PSP directory table and not the BIOS directory
table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iff7568ea05c701ecd346cc7590cf93b091ff31a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83813
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Before 'handle_psp_command' calls any of the functions in this file, it
make sure that the 'size' field in the command buffer's header doesn't
indicate that the command buffer is larger than the SMM memory region
reserved for it.
The read/write command buffer has a 'num_bytes' field to indicate how
many bytes should be read from the SPI flash and put into the data
buffer within the command buffer or how many bytes from this buffer
should be written to the flash. While we should be able to assume that
the PSP won't send us malformed command buffer, we should still better
check this just to be sure.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e8514eedc3ad154a705c8a1e85d367e452dbed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83778
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use coreboot's SPI flash access infrastructure to do the flash read,
write, or erase operations as requested from the PSP.
This patch is a modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I4957a6d316015cc7037acf52facb6cc69188d446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Detect the block size of the SPI flash and number of flash blocks
reserved for the flash region corresponding to the 'target_nv_id' field
in the command buffer. This information is then written to the
corresponding fields in the command buffer. Since detecting the flash
chip still might result in accesses to it, make sure that it's available
for use and not currently used by an OS driver. Since this code is
inside the SMI handler, we don't have to worry about this code to be
interrupted, so we don't need to set some bit to tell other code that
we're currently using the SPI controller in the SMI handler.
This patch is a modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I19041a27a9e8f901d42c3f60af834df625455ea6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83776
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPI_SEMAPHORE_DRIVER_LOCKED bit in the SPI_MISC_CNTRL register
doesn't affect the hardware, but it re-used by AMD as a semaphore to
synchronize the access to the SPI controller between SMM and non-SMM
software like an OS-level driver. Since it doesn't affect the hardware,
it's marked as reserved in the PPRs. Add the 'spi_controller_available'
helper function to check this bit to see if some software or driver
outside of SMM is currently using the SPI flash controller to avoid
interfering with that operation.
This patch is a slightly reworked version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I49218e03a5dd555b2b2d34eaad86673e9fc908c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83775
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 'find_psp_spi_flash_device_region' to get a pointer to the spi_flash
struct of the SPI flash used in the system and the region_device struct
for the target FMAP region specified by the target NV ID from the PSP
to x86 mailbox command. In order to have small patches, the newly added
static 'find_psp_spi_flash_device_region' function is marked as inline;
that inline will be removed in a following patch that calls this new
function.
This patch is a slightly reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I64b8fba2392de46ecd4c786cef0d5b6acdbd865a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83774
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and use functions to validate the target non-volatile storage ID in
the different command buffer structs.
This patch is a slightly reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: Idda0166c862d41d380b2ed21345eead5e0a1c135
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83758
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is a slightly modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I41efeecf9243ddbbd8dc3f842c5ce11058bb7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83757
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stub functions for the SPI flash access from the PSP SMI handler
and call them for the corresponding P2C mailbox commands.
Parts of this patch are taken from CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: Iedbc9d41eb0d4e8d81eeba9c01281161eb839991
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83756
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the PSP wants to access the SPI flash during runtime, but isn't the
owner of the SPI flash controller, it sends an SMI to the x86 side. The
corresponding SMI handler then checks the P2C (PSP to core) mailbox for
the command and data, processes the command, and if needed puts the
requested data into the P2C buffer.
The P2C mailbox is a memory region in TSEG aka SMM memory. Both location
and size are communicated to the PSP via the PSP SMM info mailbox
command which is sent right after mpinit is done.
This commit adds the code to access the P2C mailbox to the PSP SMI
handler code, but the handling of the actual mailbox commands the PSP
sends to the SMI handler is added in later patches to keep the patch
size manageable.
This patch is a heavily reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I50479bed2332addae652026c6818460eeb6403af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83740
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This register is currently used by the SPI DMA code that sets an
undocumented bit. A later patch will add and use some other bit in this
register.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I48447dcfb3cee07619a9b42434731f0b21458021
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83773
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clock Power Management, ASPM and L1 Substates have been
configured the same way since Skylake. The main control to
enable or disable is Kconfig, and then the level can be overridden
in devicetree.
Despite the UPDs remaining the same since Skylake, this is not the
case for Alder Lake, Raptor Lake and Meteor Lake.
Taking `starlabs/starbook` as an example, at the time of this
commit it has PCIEXP_CLK_PM, PCIEXP_ASPM and PCIEXP_L1_SUB_STATE
enabled.
On Comet Lake, this results in the correct configuration, verified
with the lspci command:
```
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
```
On Raptor Lake:
```
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
```
Clock Power Management, ASPM and L1 Substates are also not configured
for CPU root ports.
Add helper functions to configure these correctly based on Kconfig, but
retain the capability to override the specific levels from devicetree.
Change-Id: I9db18859f9a04ad4b7c0c3f7992b09e0f9484a81
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81638
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add pad_own_reg_0 to `struct pad_community`. Pad ownership indicates
whether the GPIO is owned by host or Intel Management Engine. If owned
by host, then host ownership indicates whether the GPIO is owned by ACPI
or driver.
Change-Id: I30a934fd00a7a42cb156341da1954e4e4b1231d8
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83315
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPU and PCIe IDs are from Intel Atom Processor C5100, C5300,
P5300 and P5700 Product Families EDS, doc No. 575160 rev 2.0.
Change-Id: I3f5d612765bbe9adffe0b6c7a4151f32b33e88b4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83314
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PSP can send SMIs to the x86 side to have the SMI handler service
requests from the PSP. This commit adds an empty PSP SMI handler; the
actual implementation is added in later patches to keep the patches
relatively small.
This patch is a slightly modified version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I65989ff529d728cd9d2cd60b384295417bef77ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83739
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These formats are already included in memlayout.ld.
Change-Id: I89d226440308ce3fbe00382698dcd8c88863e694
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Clang does not work that well as a linker for the header as it will
default to other linkers which do not work well here. Instead just use
the linker directly.
Change-Id: Id6ba42b470349a4b138a65b2a037f16a65982ef7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The patch enforces CSE sync when the GBB flag GBB_FLAG_FORCE_CSE_SYNC is
enabled and the system is currently booting from the RO section.
Additionally, it integrates forced CSE sync into eSOL decision-making.
BUG=b:353053317
TEST=Verified forced CSE sync on rex0 with GBB 0x200000
Cq-Depend: chromium:5718196
Change-Id: I228bc8ebf58719776f6c39e0bfbb7ad53d9bfb7f
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Clang builds (bootblock: 20800 bytes) are slightly larger than GCC
builds (bootblock: 18688 bytes) so increase the size of both bootblock
and romstage.
The technical reference manual mentions no upper limit to the size of
the bootblock in the TI header so increasing the bootblock size is
allowed.
To be able to link the clang bootblock increase it from 20K to 22K.
Change-Id: I8719bc3728d4cc8dba8d939cc154c3fc0884d47b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PSP can send SMIs to the x86 side of the system. Add helper
functions to configure and to reset the PSP SMI generation. Since
Stoneyridge also selects SOC_AMD_COMMON_BLOCK_SMI, add the SMITRIG0_PSP
define and rename SMITYPE_FCH_FAKE0 to SMITYPE_PSP in its SoC-specific
smi.h to bring it in line with the newer SoCs.
This patch is split out from CB:65523.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I525a447c9a75fdb95b9750e85a02896056315edf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83702
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpigen_write_pci_root_port writes SSDT device objects for PCIe
root port, _ADR and _BBN are provided. SSDT objects for direct
subordinate devices will also be created (if detected), _ADR and
_SUN are provided.
TEST=Build and boot on intel/archercity CRB
Change-Id: I434fea7880a463c2027abfa22ba2b3bb985815c0
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since the P2C_BUFFER_MAXSIZE value will be needed in another compilation
unit, move the define to the common psp_def.h. P2C_BUFFER_MAXSIZE is
moved there too for consistency reasons.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d4d93760c90ad6e0ecadf70600b1d697a02fa82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83701
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When sending mailbox commands to the PSP from SMM, the SMM flag needs to
be set right before sending the mailbox command and cleared right after
the command is sent. In order to not have this code duplicated, factor
it out into a function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3628463dece9d11703d5a068fe7c604108b69c1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The reasoning behind this and the positive side effects of this aren't
too clear from the code, so point those out in a comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f4121031fc1ef600cdf5551f61f1ef4e03b56a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since it's not exactly obvious what 'c2p_buffer', 'p2c_buffer' and
'smm_flag' are used for, add comments to those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4ec092a92fe9f0686ffb7103e441802fc05381f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Rename the 'domain' element of the 'domain_path' struct to 'domain_id'
to clarify that this element is the domain ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3995deb83a669699434f0073aed0e12b688bf6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83677
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
To avoid having constructs like 'dev->path.domain.domain' in the SoC
code, create the 'dev_get_domain_id' helper function that returns the
domain ID of either that device if it's a domain device or the
corresponding domain device's domain ID, and use it in the code.
If this function is called with a device other than PCI or domain type,
it won't have a domain number. In order to not need to call 'die',
'dev_get_domain_id' will print an error and return 0 which is a valid
domain number. In that case, the calling code should be fixed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d79f19846cea49609f848a4c42747ac1052c288
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83644
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During the stages which use Cache-as-RAM (CAR), coreboot needs more than
1 KiB as configured in DCACHE_BSP_STACK_SIZE. After studying the UPDs
for various SoCs(ADL-P, ADL-N, RPL), coreboot stack requirement is
estimated to be 32 KiB. Update DCACHE_BSP_STACK_SIZE accordingly.
BUG=None
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I723ba1f4289c393fe7376f989d760b26e75b33da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83680
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The comment for the BOOTBLOCK region should be written right above the
BOOTBLOCK declaration.
BUG=b:317009620
TEST=none
BRANCH=none
Change-Id: I7afdf74844a9d97169b4e4a23c3c9c6060e886d9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83649
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 59ee65d271c7c617bcc240019231da4f0bd04db6.
Reason for revert:
- Usb4CmMode & CnviWifiCore Upds are available starting with TWL FSP
version v5222.01. Therefore, no special handling is required.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I3c74ec5b9924e88a26984fe8d3275ba80edb14ab
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
TEST=Able to build google/rex.
Change-Id: I0de87a2ff5ecb37f00ec745ad930e83f6356a3fe
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83637
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add sample DIMM slot configuration table for avenuecity CRB
and beechnutcity CRB. This table will be used to fill SMBIOS
type 17 table.
TEST=Boot on intel/avenuecity CRB
It will help to update Locator, Bank Locator and Asset Tag
with the value described in dimm_slot_config_table
Change-Id: I53556c02eb75204994a1bcb42eccb940e83bd532
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change increases the DCACHE_BSP_STACK_SIZE from 512KB + 1KB to
512KB + 32KB, addressing a requirement specified by coreboot where
stack usage is higher than 1KB alone.
BUG=None
TEST=None
Change-Id: Iba3620b3b7c470176330f5e07989cd3f6238713e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83540
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I1888fedcc66ae13c76331d3f2f4465197ae51d35
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Now that we have a get_psp_mmio_base function that will work on all SoCs
that use the psp_gen2 code, we can move back to accessing the PSP
registers via their MMIO mapping. This sort-of reverts
commit 198cc26e4951 ("soc/amd/common/block/psp/psp_gen2: use SMN access
to PSP").
When doing SMN accesses from the SMI handler after the OS has taken over
ownership of the platform, there's the possibility to cause trouble by
clobbering the SMN access index register from SMM. So that should be
either avoided completely or the SMI code needs to save and restore the
original contents of the SMN index register.
The PSP MMIO base will be set up by the FSP before the resource
allocation in coreboot and be treated like a fixed resource by the
allocator. The first SMI where corresponding handler calls
'get_psp_mmio_base' happens when ramstage triggers the APM_CNT_SMMINFO
SMI right after mpinit which happens after the resource allocation. So
the PSP MMIO base address is expected to be configured and so the
'get_psp_mmio_base' function will cache the base address and won't need
to do any SMN access in subsequent calls that might happen after the OS
has take over control.
This isn't currently an issue, since the only PSP mailbox command from
the SMI handler after coreboot is done and the OS has taken over will
be during the S3/S4/S5 entry, and this will be triggered by the OS as
the last step after it is done with all its preparations for suspend/
shutdown. There will however be future patches that add SMI-handlers
which can send PSP mailbox commands during OS runtime, and so we have
to make sure we don't clobber the SMN index register.
TEST=PSP mailbox commands are still sent correctly on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I25f16d575991021d65b7b578956d9f90bfd15f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83448
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This sort-of reverts commit 00ec1b9fc7ba ("soc/amd/common/block/psp/
psp_gen2: simplify soc_read_c2p38") and is done as a preparation to
switch back to using the MMIO access to the PSP mailbox registers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icca3c7832295ae9932778f6a64c493e474dad507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add get_psp_mmio_base which reads the PSP MMIO base address from the
hardware registers. Since this function will not only be called in
ramstage, but also in SMM, we can't just look for the specific domain
resource consumer like it is done for the IOAPICs in the northbridge,
but have to get this base address from the registers. In order to limit
the performance impact of this, the base address gets cached in a static
variable if an enabled PSP MMIO base register is found. We expect that
this register is locked when it was configured and enabled; if we run
into the unexpected case that the PSP MMIO register is enabled, but not
locked, set the lock bit of the corresponding base address register to
be sure that it won't change until the next reset and that the hardware
value can't be different than the cached value.
This is a preparation to move back to using MMIO access to the PSP
registers and will also enable cases that require the use of the MMIO
mapping of the PSP registers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d51e30f186508b0fe1ab5eb79c73e6d4b9d1a4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The PSP code introduced in a following patch needs both SoC-specific
functions get_iohc_info and get_iohc_non_pci_mmio_regs to also be
available in SMM, so add those compilation units to the corresponding
target.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e32084b45f07131c80b642bc73d865fc57688a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Instead of implementing the functions get_iohc_misc_smn_base and
get_iohc_fabric_id in the SoC code, move those functions to the common
AMD code, and implement get_iohc_info in the SoC code that returns a
pointer to and the size of a SoC-specific array of domain_iohc_info
structs that contains the info needed by the common code instead. This
allows to iterate over the domain_iohc_info structs which will be used
in a later patch to find the PSP MMIO base address in both ramstage and
smm.
TEST=Mandolin still boots and all non-PCI MIO resources are still
reported to the resource allocator
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifce3d2b540d14ba3cba36f7cbf248fb7c63483fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83443
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
No need to open-code this when we have a function for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae570ba750cb29456436349b4263808e2e410e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83643
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Move is_domain0 and is_dev_on_domain0 from the Intel Xeon SP code to the
common coreboot code so that it can be used elsewhere in coreboot too,
and while moving also implement it as functions instead of macros which
is more in line with the rest of helper functions in that new file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I954251ebc82802c77bf897dfa2db54aa10bc5ac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83642
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In AMD platforms, the bit 4 of CMOS's Register A (0x0a) is DV0 bank
selection (0 for Bank 0; 1 for Bank 1) [1]. Since the MC146818 driver
accesses VBNV via Bank 0, the bit must be cleared before we can save
VBNV to CMOS in verstage.
Usually there's no problem with that, because the Register A is
configured in cmos_init() in ramstage. However, if CMOS has lost power,
then in the first boot after that, the bit may contain arbitrary data in
verstage. If that bit happens to be 1, then CMOS writes in verstage will
fail.
To fix the problem, define vbnv_platform_init_cmos() to call
cmos_init(0), which will configure the Register A and therefore allow
saving VBNV to CMOS in verstage.
[1] 48751_16h_bkdg.pdf
BUG=b:346716300
TEST=CMOS writes succeeded in verstage after battery cutoff
BRANCH=skyrim
Change-Id: Idf167387b403be1977ebc08daa1f40646dd8c83f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83495
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When we tried to add CMOS support to PSP verstage (CB:83495), the clang
builds failed on boards with cezanne SoC (such as Guybrush), due to
over-sized verstage. On the other hand, there is no such problem for gcc
builds on the same boards.
Building PSP verstage by clang generates much larger verstage size (81K)
compared with using gcc (67K). To unblock adding features to verstage,
temporarily enable -Oz for clang builds.
Change-Id: I033458556986ade88fb8e68499b632deae4dd419
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
TEST=Build and boot on archercity CRB
No changes in boot log and 'dmidecode' result under centos
TEST=Build and boot on avenuecity CRB
It will add DMI type 16,17,19,20
Change-Id: I2f5b7a4ffabed033d54d4724b3c41246503166fe
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add new folder and basic drivers for Mediatek SoC 'MT8196'.
Refer to MT8196_Chromebook_Application_Processor_Datasheet_V1.0 for
MT8196 SPEC detail.
This patch also enables UART and ARM arch timer.
TEST=saw the coreboot uart log to bootblock
BUG=b:317009620
Change-Id: I8190253ed000db879b04a806ca0bdf29c14be806
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
One smbios type 4 should be provided for each CPU instance.
Create SMBIOS type 4 entry according to socket number, with a
default value of 1.
TEST=Boot on intel/archercity CRB
No changes in boot log and 'dmidecode' result under centos
Change-Id: Ia47fb7c458f9e89ae63ca64c0d6678b55c9d9d37
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83331
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate memmory macros of MediaTek SoCs,
move the header file to a common directory.
TEST=Build geralt pass
BUG=b:317009620
Change-Id: Iea4add8fe3735085c13438a2e177bec177913191
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83571
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate region declarations of MediaTek SoCs,
move the header file to a common directory.
BUG=b:317009620
TEST=Build geralt pass.
Change-Id: Iad1c9f520cdc5c6ad2b55e8f4ec6149fa47b17b1
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83570
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
create_ioat_domain creates the domain device with a number of
resources. Return the updated resource index so that the updated
index could be used as the starting index for additional resource
creation outside create_ioat_domain.
TEST=Build and boot on intel/archercity CRB
Change-Id: I9e719ae8407c7f31f88dbb407f003e2ded8f0faf
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add definition of the IOM_READY bit in the IOM_TYPEC_STATUS_1
register. Needed by Protectli VP66XX boards to poll for this bit
for about 2 seconds before FSP Silicon Init to have USB functionality.
ME is supposed to start fetching and executing the TCSS IPs FW right
after DRAM Init Done message, which happens after MRC. For most
platforms the time interval between the end of MemoryInit and start of
SiliconInit is enough for IOM_READY to get set.
TEST=Poll the IOM_READY bit on VP66XX platform and observe the
TCSS XHCI is up in lspci.
Change-Id: If868a77852468ebb73526b1571191cbdeb1804b9
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83356
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To be able to use the IOHC_MMIO_EN define in other compilation units,
move the define to the corresponding header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If88950418406d1709ed95b3d05f7e6ad66438f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I6155ec45408dca83573c86e6db1ead5a82a0d77a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new CNVi PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the CNVi driver's `pci_device_ids` list to
include these new IDs.
Finally, dropped unused BT PCI IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I7d80403b87537aea41ff48ff6d274180577f1ac6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83520
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new XDCI PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the XDCI driver's `pci_device_ids` list to
include these new IDs.
Finally, dropped unused TCSS XDCI PCI IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I51196401904e2402ac7669fa852a541bb7c2d453
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83518
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new CSE0 PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the CSE0 driver's `pci_device_ids` list to
include these new IDs.
Finally, dropped unused CSE1-3 PCI IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I5656aeb8c5439c8361aeb3a3d759df1216d84f8b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83517
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new Audio (HDA/DSP) PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the Audio driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I3c9e420a6ae19d00fb5510c99d4c219dc43ad3c0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83516
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new SRAM PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the SRAM driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ib6d62dad59965258dab453533dface9c359de586
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83515
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new P2SBx PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the P2SBx driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie1c36bc1c014bb1e219afe0cafb6c9941f253b0c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new XHCI/TCSS XHCI PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the XHCI driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I5ae8f493374087a5e684e0a04486cd64cea6f335
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83513
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new SMBUS PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the SMBUS driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I4b8b59cf4e005f0e17a25d0fbe761404dab432b3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83512
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new Fast-SPI and GSPIx PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the SPI driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I5c7c0be6f219c93d4520494857d31ce1cf939f36
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83511
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new UARTx PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the UART driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I384a753f08ae5a752cef6009d07104e8ff4b4a6e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new I2Cx PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the I2C driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I79ba0b563146d658521cdd40aabb3ee882f4d187
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83509
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new PMC PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the PMC driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Iae468fdace2d9cfd532957e4f3c55b89b96a52a0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83508
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new PCIe Root Port PCI device IDs for Intel PTL-U
and PTL-H.
Additionally, updates the PCIe driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I5913c6ac0a4766c14f23954be1e885d45f69d36a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83507
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds new eSPI/LPC PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the LPC driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie9f0ea9536e2f73c2258e9e12b510d21212248ea
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new DID2 PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the graphics driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Iab499070c87e020e36901b4ea453a1893bd16ea0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83491
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new DID0 PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the System Agent driver's `systemagent_ids` list
to include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie4d77eb489e16d18b996fdda3216e1275083d7e7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83490
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I30a98ae4989edc97d56d2b538930b3c67565d9dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
This patch removes `p2sb.c` from the bootblock build for the
Meteor Lake platform.
BUG=none
TEST=Builds successfully for google/rex.
Change-Id: Ib2beeee68bb20568888d4b555c2fa82e0bf0fd3c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch updates Tiger Lake code to use the common eSPI header file
(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/volteer.
Change-Id: I01eca0ab132b1788c4633d0e214d4dfde25f5b98
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83488
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates Meteor Lake code to use the common eSPI header
file(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/rex.
Change-Id: Ibb37413bb6c925650f55b0dcf70e7483bf257888
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch updates Jasper Lake code to use the common eSPI header
file (`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/dedede.
Change-Id: I93dcd26588111d848be1580220945687890ef3b8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch updates Elkhart Lake code to use the common eSPI header
file(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for Intel Elkhartlake platform.
Change-Id: Iaef308ad1c8ecfb11448e75f39285a2170bbc49c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83485
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates Alder Lake code to use the common eSPI header file
(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/redrix.
Change-Id: Ib4452547325042de48ee4fca3d3910a031b56b64
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83484
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves the SoC-specific `eSPI.h` file into the IA common
code to promote code reuse and reduce duplication across different
SoC generations.
TEST=Builds successfully for google/rex.
Change-Id: Icb09421eec45c1ef8ab50252543b000078f18b21
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Replace the SoC-specific `report_cache_info()` function with the
common `car_report_cache_info()` API from `car_lib`. This promotes code
reuse and reduces SoC-specific implementation for cache reporting.
BUG=none
TEST=Builds and boots successfully on google/rex platform.
Change-Id: Id5ffcab54232294ffa101f975d0ec51ac63f1910
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Replace the SoC-specific `report_cache_info()` function with the
common `car_report_cache_info()` API from `car_lib`. This promotes code
reuse and reduces SoC-specific implementation for cache reporting.
BUG=none
TEST=Builds and boots successfully on google/marasov platform.
Change-Id: I18be2c33dbe5186643af52823eb2fb185a296909
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83481
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds `car_lib.c` to the IA common code to consolidate
SoC-agnostic CAR APIs. Initially, it includes `car_report_cache_info()`
to provide a unified way to read cache information, reducing the need
for SoC-specific implementations.
TEST=Builds successfully for google/rex.
Change-Id: I2ff84b27736057d19d4ec68c9afcb9b22e778f55
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the condition that
SOC_INTEL_METEORLAKE_SIGN_OF_LIFE is only enabled for x86_32 arch.
Now, it is safe to enable eSOL for x86_64 platform as well.
BUG=b:346682156
TEST=Able to see eSOL on google/rex64.
Change-Id: I825c988800ec303a8f37141f6487115b1c7c5d3a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83498
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The UEFI reference firmware uses AMDI0030 instead of AMD0030 as HID for
the GPIO controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a6fa1acdca0ee5b6e1358b6279b7c501d3dfd16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The UEFI reference firmware uses AMDI0030 instead of AMD0030 as HID for
the GPIO controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dd48d7d9cf3f6d75853bb825e5ddc32bba430b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The table "IOMUX Functional Table" in PPR #57254 rev. 1.60 was used as a
reference. This should fix the ESPI_ALERT_D1 IOMUX setting for the
boards using the Glinda SoC which previously didn't match the hardware.
Compared to Phoenix, Glinda has two more chip select outputs for the
SPI2 controller and an additional ZST_STUTTER_RAIL IOMUX function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9adfbe0c7aee90d6fe990f239d82a1d013e7f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83437
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Issue: System hang occurred due to unhandled SPI synchronous SMI,
triggered by LOCK_ENABLE bit and WPD assertion.
Solution: Enabled SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE configuration
to allow the system to handle and clear SPI synchronous SMI.
BUG=b:350623902
TEST=reboot test on 40 google/xol by ODM, all passed w/o
hang.
Change-Id: I4c14b1e3d537e46e671e950c91c9d0042fe26836
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83432
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: SH Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-by: Edward Doan <edoan@chromium.org>
|
|
This patch extends the crashlog IP support beyond 32-bit mode to
support Intel future generation SoCs, which may require crashlog
support for 64-bit architectures. uintptr_t data type is used for
Address pointers and void* for dereferencing
BUG=b:346676856
TEST=Successfully built Meteor Lake (rex) and tested for google/rex0
and google/rex64 images.
Change-Id: I552257d3770abb409e2dcd8a13392506b5e7feb7
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83106
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CMOS entry for CSE partition firmware was incorrectly labeled as
`ramtop` and `partition firmware` in the error messages.
This patch corrects the messages to accurately refer to `CSE partition
firmware`.
Additionally, the alignment and size check comments are updated to
reflect this change.
Change-Id: Ib3a7fb88f52c4d0c47d828bcd1c4649e62d19654
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch ensures CSE boot partition (RO/RW) version information only
log when the status is "success". If the status is not successful,
log an error message indicating the failure and status code.
This change avoids logging potentially incorrect version information
when the boot partition is not valid.
BUG=b:305898363
TEST=Builds successfully for google/rex variants.
Change-Id: I1932302b145326a1131d64b04af1cbfd6d050b7b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch makes the selection of `SOC_INTEL_CSE_LITE_PSR` conditional
on both `MAINBOARD_HAS_CHROMEOS` and `SOC_INTEL_CSE_LITE_SKU` being
enabled.
This ensures that CSE Lite PSR is only active when both ChromeOS is the
target platform and CSE sync is performed inside coreboot.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I7199c034bbe6e7f077650417da67fa544f0b49d5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83396
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify the dependencies for `SOC_INTEL_CSE_RW_UPDATE` and
`ME_REGION_ALLOW_CPU_READ_ACCESS` config options to include
`SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD`.
This allows these features to be enabled even when CSE sync is performed
in the payload, not just within coreboot (when `SOC_INTEL_CSE_LITE_SKU`
config is enabled).
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Id6ec19d74237f278e8383c89923523871b2cc2db
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch updates FSP-M UPDs conditionally to ensure CSE firmware
updates and VGA initialization control only when
`SOC_INTEL_CSE_LITE_SKU` config is enabled.
This ensures eSOL rendering is tied to CSE sync performed in coreboot,
preventing unnecessary setup when sync is deferred to the payload.
Deferring CSE sync to the payload results in the depthcharge screen.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Iffdd4b1be4abba8c57e28542058a575cc6de674c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch refactors the handling of CSE CBMEM IDs to enable platforms
to choose whether to perform CSE sync operations within coreboot or
defer it to the payload. This separation improves code organization,
ensuring `cse_lite.c` focuses on coreboot-specific CSE Lite tasks.
Now, platforms can select:
* `SOC_INTEL_CSE_LITE_SKU` for CSE sync within coreboot
* `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` for deferred payload sync
This change ensures mutually exclusive options, avoiding unnecessary
SPI flash size increases.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: I74f70959715f9fd6d4d298faf310592874cc35d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83393
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Myst boards.
TEST=untested, but same change as made for Mendocino
Change-Id: Ib4a78a39badf0a067e22eebe5869e5ea51723f35
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Skyrim boards.
TEST=build/boot Skyrim (Frostflow), verify RAM training only
run on first boot after flashing.
Change-Id: I9be1699d675331b46ee9c42570700c2b72588025
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83400
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: Ib757c0548f6f643747ba8d70228b3d6dfa5182cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82752
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the PCI_DEVFN macro to make the calculation of the ivhd->device_id
value a bit clearer.
TEST=Timeless build results in identical binary for Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b7949ad3524790e7d7d527c488a32e785f55bc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83343
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Domain device objects are created with HID/CID/UID/_OSC/_PXM
Dynamic domain SSDT generation could benefit the support of SoCs with
multiple SKUs, or the case where one set of codes supports multiple
SoCs. One possible side-effect might be the extra performance cost for
generating these tables, which should not bring big impact on high
performance server CPUs.
GNR codes run with dynamic domain SSDT generation to fit for both
GraniteRapids and SierraForest SoCs.
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I28bfdf74d8044235f79f67d832860d8b4306670c
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Fast boot will used pre-saved hardware configuration data to
accelerate the boot process, e.g. DDR training is skipped by using
pre-saved training data. Enable fast boot on cold and warm resets
by default.
Change-Id: Ib5dc76176b16ea1be5dd9b05a375c9179411f590
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This change skips the ME firmware version logging in
print_me_fw_version() if the ME firmware SKU is detected as Lite SKU.
The reasoning is that the RO (BP1) and RW (BP2) versions are already
logged by the cse_print_boot_partition_info() function for Lite SKUs,
making the additional log redundant.
The check for the Lite SKU has been moved to print_me_fw_version(),
where the decision to print the version is made, instead of in
get_me_fw_version(), where the version information is retrieved.
TEST=Able to build and boot google/rex.
w/o this patch:
[DEBUG] ME: Version: Unavailable
w/ this patch:
Unable to see such debug msg.
Change-Id: Ic3843109326153d5060c2c4c25936aaa6b4cddda
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
