summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2022-03-02soc/mediatek/mt8186: Set RTC capid to 0xC0 to pass XTAL 26 MHz testRex-BC Chen
The XTAL 26MHz test failed on krabby, so we adjust RTC capid from default value 0x88 to 0xC0 for MT8186. We also add a new log message to show the capid value which is read from MT6366. This implementation is according to chapter 5.13 in MT8186 Functional Specification. BUG=b:218439447 TEST=set capid to 0xc0. TEST=XTAL 26MHz test passed. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I16ab46a5697d304e8001de231ffc9b7b7a2f9282 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02soc/mediatek: remove unused RTC_GPIO_USER_MASKRex-BC Chen
RTC_GPIO_USER_MASK is not used in any drivers, so we remove them. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I0a15d5da142bb38feb595610d69566330e31fedd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-02mb, soc: Add the SPD_CACHE_ENABLEZhuohao Lee
In order to cache the spd data which reads from the memory module, we add SPD_CACHE_ENABLE option to enable the cache for the spd data. If this option is enabled, the RW_SPD_CACHE region needs to be added to the flash layout for caching the data. Since the user may remove the memory module after the bios caching the data, we need to add the invalidate flag to invalidate the mrc cache. Otherwise, the bios will use the mrc cache and can make the device malfunction. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=build pass and enable this feature to the brask the device could speed up around 150ms with this feature. Change-Id: If7625a00c865dc268e2a22efd71b34b40c40877b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62294 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-01soc/amd/common/fsp/fsp_validate.c: print warning instead of errorJulian Schroeder
If an AMD FSP binary has no valid image revision information, print a warning instead of an error. Change-Id: Ie9c5a387b81205fe93382778090260e41e261776 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62349 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-01intelblocks/cse: Skip sending EOP during S3 resumeMAULIK V VAGHELA
coreboot should skip sending EOP during S3 resume since CSE doesn't require EOP in resume path. Currently EOP is being sent during PAYLOAD_BOOT or PAYLOAD_LOAD stage which doesn't get called during S3 resume. In case EOP is moved in earlier stage, coreboot might send EOP in S3 resume as well. This patch adds check before calling cse_send_eop. BUG=b:211085685 BRANCH=None TEST=Check by moving EOP to earlier stage. EOP sending is skipped during S3 resume. Change-Id: I8f22446974bc1e7b2d57468633c36bb99ffe1436 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-02-28soc/intel/common/block/acpi: Return existing Object for _DSM subfunctionTim Wawrzynczak
Currently the LPIT Get Constraints _DSM subfunction returns a package containing the path to a nonexistent device (\NULL). This is used to work around an issue with Windows, where returning an empty package will cause a BSOD. However, using this non-existent device can also cause confusion, as on Linux, it shows an error in dmesg, e.g. ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \NULL (20200925/dspkginit-438) Therefore, this patch modifies this returned package slightly to include the path to ACPI_CPU_STRING for CPU 0, which should always be emitted on Intel platforms that use the PEP driver. Tested on google/brya0 on ChromeOS 5.10 kernel Tested with current Windows 11 ISO Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If74a1620ff0de33bcdba06e1225c5e28c64253e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.corp-partner.google.com>
2022-02-28soc/amd/sabrina: Add XHCI configurationJon Murphy
Add xhci 2 controller support for additional USB port/ Dummy setting BUG=b:214413631 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I5c8885bf46ddbfc85b31585a4da7f746c1a6bcd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-26soc/intel/fast_spi: Check SPI Cycle In-Progress prior start HW SeqSubrata Banik
This fixes no practical problem, especially for coreboot where only one process should access the SPI controller. It makes the code look more spec compliant. As per EDS, SPI controller sets the HSFSTS.bit5 (SCIP) when software sets the Flash Cycle Go (FGO) bit in the Hardware Sequencing Flash Control register. Software must initiate the next SPI transaction when this bit is 0. Add non-blocking mechanism with `5sec` timeout to report back error if current SPI transaction is failing due to on-going SPI access. BUG=b:215255210 TEST=Able to boot brya and verified SPI read/write is successful. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4d35058244a73e77f6204c4d04d09bae9e5ac62c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2022-02-26soc/amd/common/psp_verstage: Add missing post codes on S0i3 resumeRaul E Rangel
We print these out in the normal flow, so lets add them for S0i3 resume as well. BUG=b:221231786 TEST=Perform suspend/resume cycle on guybrush and verify we get the new POST codes. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia7d607453d58084868cfa50770fd0f370b2ea2bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-26soc/amd/{common/psp_verstage,soc/picasso}: Remove workbuf shrinkingRaul E Rangel
This feature was never used. Let's remove it to keep things simple. BUG=221231786 TEST=Boot test guybrush and morphius and verify transfer buffer is correctly passed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I93a284db919f82763dcd31cec76af4b773eb3f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-02-25mb, soc: change mainboard_memory_init_params prototypeZhuohao Lee
The mainboard_memory_init_params takes the struct FSP_M_CONFIG as the input which make the board has no chance to modify data in the FSPM_UPD, for example, set FspmArchUpd.NvsBufferPtr = 0. After changing the FSP_M_CONFIG to FSPM_UPD, the board can modify the value based on its requirement. BUG=b:200243989 BRANCH=firmware-brya-14505.B TEST=build pass Change-Id: Id552b1f4662f5300f19a3fa2c1f43084ba846706 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-25intelblocks/pcie: Correct mapping between LCAP port and coreboot indexMAULIK V VAGHELA
coreboot uses port index which is 0 based for all PCIe root ports. In case of PCIe remapping logic, coreboot reads LCAP register from PCIe configuration space which contains port number (mostly 1 based). This assumption might not be true for all the ports in coreboot. TBT's LCAP registers are returning port index which are based on 2. coreboot's PCIe remapping logic returns port index based on index 1. This patch adds variable to pcie_rp_config to pass lcap_port_base to the pcie remapping function, so coreboot can map any n-based LCAP encoding to 0-based indexing scheme. This patch updates correct lcap_port_base variable for all PCIe root ports for all SOCs, so that function returns correct 0-based index from LCAP port number. BUG=b:210933428 BRANCH=None TEST=Check if code compiles for all ADL boards Change-Id: I7f9c3c8e753b982e2ede1a41bf87d6355b82da0f Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25cpu,mb,nb,soc: use HPET_BASE_ADDRESS instead of magic numberFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I570f7de90007b67d811d158ca33e099d5cc2d5d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62308 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25arch/x86: consolidate HPET base address definitionsFelix Held
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO region which is 0xfed00000 on all chipsets and SoCs in the coreboot tree. Since these two different constants are used in different places that however might end up used in the same coreboot build, drop the Kconfig option and use the definition from arch/x86 instead. Since it's no longer needed to check for a mismatch of those two constants, the corresponding checks are dropped too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25soc/intel/denverton/include/iomap: drop unused DEFAULT_HPET_ADDR defineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie92bd54b072d545944b3d0251e9727ce493bb864 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-25arch/x86: factor out and commonize HPET_BASE_ADDRESS definitionFelix Held
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000, so define this once in arch/x86 and include this wherever needed. The old AMD AGESA code in vendorcode that has its own definition is left unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-02-25soc/intel/baytrail,braswell/include/iomap: drop unused HPET_BASE_SIZEFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I875916488a99af768d087691549a93f6fd5169ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/62303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-24soc/apollolake: Allow configuring individual USB ports on GLKSean Rhodes
Allow configuring the limited fields that FSP-S provides. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I56c37338eaa978fdb2c63807331493e8aecbdf60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-24treewide: Write minor version at acpi_create_fadt() functionElyes Haouas
When "fadt->FADT_MinorVersion" is not explicitly set to the right value, gcc sets it up to "0". So set it correctly for treewide. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ic9a8e097f78622cd78ba432e3b1141b142485b9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Lance Zhao
2022-02-24soc/amd/*/include/soc/iomap.h: rework HPET base address checkFelix Held
The AMD SoCs had a check to make sure that HPET_ADDRESS_OVERRIDE isn't set so that the HPET_ADDRESS Kconfig option will have the right default value. Instead check if the HPET_ADDRESS Kconfig value matches the HPET_BASE_ADDRESS define in the SoC code which is the case if HPET_ADDRESS_OVERRIDE isn't selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icf1832eb36c031e93ba24f342e9a8a7bf13faecc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62275 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-23src/mediatek: Refactor dramc_param to share more structuresXi Chen
The ddr_base_info struct, which stores basic DDR information, should be platform independent. Currently the struct is defined in each SoC's dramc_parah.h. To prevent code duplication, move it as well as other related structs and enums to a common header. Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-23soc/mediatek/mt8186: disable VSRAM_CORERex-BC Chen
VSRAM_CORE is not used on kingler/krabby, so we disable it. This implementation is according to chapter 3.7 in MT8186 Functional Specification. BUG=b:220071688 TEST=the rail steadily shows 0V in either S0, S3, and S5. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5256f6a2c0ca5a951dc79f564575b526a84463fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62253 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-22soc/intel/common/block/acpi: Drop duplicated 'fadt->header.revision'Elyes Haouas
The 'fadt->header.revision' is already done at src/acpi/acpi.c acpi_create_fadt(). Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ib9b6dc7e86ca17e0b2d374ee2c3bdf06f8b82dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62222 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-22soc/amd/sabrina/i2c: remove TODOFelix Held
The SoC-specific I2C code and header file have been verified some time ago, but it seems that I forgot to remove the corresponding TODOs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd162bda10e5993bc32db3a77588491397e3c19e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-22treewide: Get rid of CONFIG_AZALIA_MAX_CODECSElyes Haouas
Get rid of Kconfig symbol introduced at commit 5d31dfa8 High Definition Audio Specification Revision 1.0a says, there are 15 SDIWAKE bits. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ib8b656daca52e21cb0c7120b208a2acdd88625e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62202 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-22soc/amd/common/block/lpc/espi_util: use __fallthroughFelix Held
Using __fallthrough instead of a comment about the fall-through being intentional should make clang stop complaining about intended fall- through statements. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I940529be02e20c72f6e97b2cfa10f0dd8f7020b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-02-21soc/amd/sabrina/fw.cfg: Change the instance of PMUI/D to 2Zheng Bao
Change-Id: Ie9dbed7d6dd1e5f0c97d4a6cedea3d6bd7b000a2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
2022-02-21soc/amd/*/fw.cfg: Remove the misleading name for PMUI and PMUDZheng Bao
Add the information of substance and instance in the string for PMUI and PMUD. It is amdfwtool's job to extract the number from the string. Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-21soc/intel/alderlake: Make clang static assert happyArthur Heymans
Change-Id: Ia3cd66f6b735f7430abcdba8a9323d5ee1320fd4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-21soc/intel/alderlake: Fix function pointer typeArthur Heymans
const void is not a proper return type for a function. It's the function pointer themselves that need to be const. This fixes building with clang. Change-Id: I99888ab9d9d80f1d6edb33b9f4a3f556f211a6e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-21soc/intel/adl/bootblock/report_platform.c: Use the correct formatArthur Heymans
Change-Id: I54c40434f44621c4ea6564ac9c87c5b2fa083b5d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-21[acpi]{include,soc/amd,southbridge/amd}: Clarify ARM_boot_arch in commentsElyes Haouas
Change-Id: I8b209da90b5a591f62e760961c64c4c63e6ef65b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-21soc/intel/denverton_ns: Add `pmc_mmio_regs` as public functionSubrata Banik
This patch adds `pmc_mmio_regs` a public function for other IA common code may need to get access to this function. BUG=none TEST=none Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I67a0f7fdcd0827172426bc938569a5022eff16f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-02-21soc/intel/denverton_ns: Select PMC PCI discoverable configSubrata Banik
This patch selects SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE config to reflect the SoC actual behaviour where PMC PCI device is still visible over bus even after FSP-S exit. Additionally, add DNV PMC PCI ID into PMC IA-common code. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iaaea20e54c909800e4d75b58c29507fc1944cfba Reviewed-on: https://review.coreboot.org/c/coreboot/+/62135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2022-02-21soc/intel/alderlake: Enable eMMC based on dev enabledKrishna Prasad Bhat
1. Add eMMC device function in pci_devs.h. 2. Enable eMMC device and configuration based on dev enabled. 3. Add SOC acpi name for eMMC. Change-Id: I44f17420f7a2a1ca0fbb6cfb1886b1617c5a5064 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-21soc/intel/alderlake: Add eMMC ACPI methods for Alder Lake NKrishna Prasad Bhat
Alder Lake N SOC has eMMC device. Add ACPI ASL methods for it. Change-Id: I53f04e81584493049d37b46e078d394d3c8a2f09 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-02-21src/acpi: Add macro for FADT Minor Version and use itElyes Haouas
Change-Id: I6a0e9b33c6a1045a3a4a6717487525b82d41e558 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao
2022-02-18soc/intel/apollolake: Create alias for GEN_PMCON1 as GEN_PMCON_ASubrata Banik
This patch creates alias for GEN_PMCON_A to maintain parity with other IA SoC PMC register definitions. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id9a23c58a325cb544c50cbda432fe3117eea22fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/61984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-02-18soc/intel/denverton_ns: Add function to clear PMCON status bitsSubrata Banik
This patch adds an SoC function to clear GEN_PMCON_A status bits to align with other IA coreboot implementations. Added `MS4V` macro for GEN_PMCON_A bit 18 as per EDS doc:558579. Additionally, removed `PMC_` prefix from PMC configuration register macros GEN_PMCON_A/B and ETR3. Moved PMC PCI device macro from pmc.h to pci_devs.h and name PCH_PMC_DEV to PCH_DEV_PMC. Also, adjust PCI macros under B0:D31:Fx based on function numbers. BUG=b:211954778 TEST=None. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2690ccd387b40c0d89cf133117fd91914e1b71a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-02-18soc/intel/alderlake: Skip FSP Notify APIsSubrata Banik
Alder Lake SoC deselects Kconfigs as below: - USE_FSP_NOTIFY_PHASE_READY_TO_BOOT - USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE to skip FSP notify APIs (Ready to boot and End of Firmware) and make use of native coreboot driver to perform SoC recommended operations prior booting to payload/OS. Additionally, created a helper function `heci_finalize()` to keep HECI related operations separated for easy guarding again config. TODO: coreboot native implementation to skip FSP notify phase API (post pci enumeration) is still WIP. BUG=b:211954778 TEST=Able to build brya with these changes and coreboot log with this code change as below when ADL SoC selects required configs. BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms coreboot skipped calling FSP notify phase: 00000040. coreboot skipped calling FSP notify phase: 000000f0. BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post CSE: EOP requested action: continue boot CSE EOP successful, continuing boot HECI: CSE device 16.1 is disabled HECI: CSE device 16.4 is disabled HECI: CSE device 16.5 is disabled BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0198c9568de0e74053775682a44324405746389a Reviewed-on: https://review.coreboot.org/c/coreboot/+/60406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-02-18soc/intel/common/cse: Add `finalize` operation for CSESubrata Banik
This patch implements the required operations to perform prior to booting to OS using coreboot native driver when platform decides to skip FSP notify APIs i.e. Ready to Boot and End Of Firmware. BUG=b:211954778 TEST=Able to build brya with these changes and coreboot log with this code change as below when ADL SoC selects all required configs: BS: BS_PAYLOAD_LOAD run times (exec / console): 135 / 62 ms coreboot skipped calling FSP notify phase: 00000040. coreboot skipped calling FSP notify phase: 000000f0. BS: BS_PAYLOAD_LOAD exit times (exec / console): 0 / 11 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post CSE: EOP requested action: continue boot CSE EOP successful, continuing boot HECI: CSE device 16.1 is disabled HECI: CSE device 16.4 is disabled HECI: CSE device 16.5 is disabled BS: BS_PAYLOAD_BOOT entry times (exec / console): 9 / 27 ms Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I70bde33f77026e8be165ff082defe3cab6686ec7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-18drivers/fsp/fsp2_0: Rework FSP Notify Phase API configsSubrata Banik
This patch renames all FSP Notify Phase API configs to primarily remove "SKIP_" prefix. 1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM -> USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM 2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT -> USE_FSP_NOTIFY_PHASE_READY_TO_BOOT 3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE -> USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE The idea here is to let SoC selects all required FSP configs to execute FSP Notify Phase APIs unless SoC deselects those configs to run native coreboot implementation as part of the `.final` ops. For now all SoC that uses FSP APIs have selected all required configs to let FSP to execute Notify Phase APIs. Note: coreboot native implementation to skip FSP notify phase API (post pci enumeration) is still WIP. Additionally, fixed SoC configs inclusion order alphabetically.  BUG=b:211954778 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-18soc/amd/common/block/psp/Makefile: add fmap_config.h dependencyFelix Held
Compiling efs_fmap_check.c depends on fmap_config.h already being generated, so add this dependency. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I85e0900574f928d1594f8d1831ba58f959b75d27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-18soc/amd/common/block/apob/apob_cache: use APOB cache size from FMAPFelix Held
Also add the Makefile dependency on the fmap_config.h file to make sure that this file already exists when it's included. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I540ea2c14fd187845efd3c0c8c1e4b8f82c8cac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-17soc/amd/common/block/i2c: Add support for shared TPM_I2C controllerJan Dabros
There are platforms equipped with AMD SoC where I2C3 controller connected to TPM device is shared between X86 and PSP. In order to handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends acquire and release requests to be accepted by PSP. An example of implementation within Linux kernel is available [1]. There is a need to introduce new ACPI_ID ("AMDI0019") so that dedicated driver on OS side can bind to it and handle this special setup. Since PSP takes care of I2C controller power management, we need to remove PowerResource object from DSDT. BUG=b:204508404 BRANCH=guybrush [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: Iccfc09d8c580d7ab2acb69d26b9c293cf625fb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61863 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17src/soc: Remove space before tabElyes Haouas
Spaces before tabs are not allowed. Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17soc/intel/alderlake: Add CNVi common driver KconfigVarshit B Pandya
Alder Lake has CNVI device. Select SOC_INTEL_COMMON_BLOCK_CNVI for Alder Lake. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I6bf2292e870c990deb63fbf6e841ae7c5c63b3a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-02-17soc/mediatek/mt8195/include/soc/addressmap.h: Remove space before tabElyes Haouas
Spaces before tabs are not allowed. Change-Id: I2732c01fd87c56227d47a4c0104de8e227b0cc34 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62018 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17amd/common/block/gpio/gpio: don't use -1 as bitmask in gpio_or32Felix Held
The and-mask passed to the gpio_update32 call needs all 32 bits to be set to ones. When building as 32 bit binary the -1UL will result in the needed bit mask, but for a 64 bit build the constant would have 64 bits set to ones which then gets truncated to 32 bits causing a compiler error. Use 0xffffffff as bit mask instead which behaves correctly in both cases and also clarifies what this is doing. TEST=Timeless build for Chausie results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0b6a50bd914fdbb7a78885efb6c610715e2d26c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62053 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aamir Bohra <aamirbohra@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17amd/common/block/spi/fch_spi_ctrl: use uintptr_t for addressesFelix Held
This fixes a build failure when trying to build the code in 64 bit mode. TEST=Timeless build for Chausie results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If8fe7b626d9d72c0b8ed07ced93e46f795e36848 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamirbohra@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-16soc/amd/cezanne/psp_verstage/uart: Fix off by 1 errorRaul E Rangel
We only allow index = {0, 1}. Fix the check. BUG=b:215599230 TEST=Build guybrush BRANCH=guybrush Found-by: Coverity CID 1469611 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I59615ab39faeded43b3803b4450c84ab8a8b81ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/61988 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-16Use the fallthrough statement in switch loopsArthur Heymans
Clang does not seem to work with 'fall through' in comments. Change-Id: Idcbe373be33ef7247548f856bfaba7ceb7f749b5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-16soc/amd/common/block/psp: add PSP commandJason Glenesk
Add PSP command to send SPL fuse command if PSP indicates SPL fusing is required. Also add Kconfig option to enable sending message. BUG=b:180701885 TEST=On a platform that supports SPL fusing. Build an image with an SPL table indicating fusing is required, confirm that PSP indicates fusing required and coreboot sends the appropriate command. A message indicating PSP requested fusing will appear in the log: "PSP: Fuse SPL requested" Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: If0575356a7c6172e2e0f2eaf9d1a6706468fe92d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: ritul guru <ritul.bits@gmail.com>
2022-02-15soc/intel/cnl: Move selection of DISABLE_HECI1_AT_PRE_BOOT back to mainboardMatt DeVillier
Commit 805956bce [soc/intel/cnl: Use Kconfig to disable HECI1] moved HECI1 disablement out of mainboard devicetree and into SoC Kconfig, but in doing so inadvertently disabled HECI1 for Puff-based boards which previously had HECI1 enabled by default. To correct this, move the Kconfig selection back into the mainboard Kconfig, and set defaults to match values prior to refactoring in 805956bce. Test: run menuconfig for boards google/{drallion,hatch,puff,sarien} and ensure Disable HECI1 option defaults to selected for all except Puff. Change-Id: Idf7001fb8b0dd94677cf2b5527a61b7a29679492 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-15soc/intel/cnl: switch to PMC/IPC for HECI disable on SOC_INTEL_COMETLAKEMatt DeVillier
Commit d6dbd933 [soc/intel/cannonlake: Use SBI msg to disable HECI1] switched CNL-based mainboards from using FSP for HECI disablement to SBI msg, but this causes google/hatch to hang when attempting to unhide p2sb as part of disabling HECI1 via SBI during SMM, so switch to using PMC/IPC method. SOC_INTEL_WHISKEYLAKE and SOC_INTEL_COFFEELAKE do not support PMC disablement method, so they remain using SBI. Test: build/boot google/hatch, verify HECI1 disabled via console log and lspci in booted OS. Change-Id: I06f0eb312b579af4a0fe826403374dcd99689d21 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-15soc/intel/common/block/cse: move cse_disable_mei_devices() into disable_heci.cMatt DeVillier
Move cse_disable_mei_devices() from cse_eop.c into heci_disable.c, so that platforms needing to use heci1_disable_using_pmc() can do so without requiring cse_eop.c be unnecessarily compiled in as well. This will allow Cannon Lake platforms to use PMC to disable HECI1 instead of SBI, which is currently causing a hang on google/hatch (and will be changed in a follow-on patch). Test: build test google/{ampton,drobit,eve,akemi} boards to ensure no breakage. Change-Id: Iee6aff570aa4465ced6ffe2968412bcbb5ff3a8d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-02-15soc/intel/apollolake: Fix overlapping ACPI resource rangesMatt DeVillier
The address space allotted to MCRS in the northbridge needs to be exclusive of the address space allotted to the GPIO controllers in the southbridge, otherwise Windows complains of overlapping resource ranges and disables the GPIO controllers. To prevent overlap, use CONFIG_PCR_BASE_ADDRESS to set the upper bound of MCRS rather than MMCONF. Test: boot Windows 10/11 on google/{reef,ampton} and verify that GPIO controllers are indicated as without fault in Device Manager. Change-Id: I2117054edb448e717b7cbe80958c9c4e6c996e2b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
2022-02-15soc/intel/common/cse: Add `cse_send_end_of_post()` as a public functionSubrata Banik
This patch creates a global function `cse_send_end_of_post()` so that IA common code may get access to this function for sending EOP command to the HECI1/CSE device. Additionally, use static variable to track and prevent sending EOP command more than once in boot flow. BUG=b:211954778 TEST=Able to build and boot Brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I837c5723eca766d21b191b98e39eb52889498bfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2022-02-15soc/intel/*/pmc: Add `finalize` operation for pmcSubrata Banik
This patch implements the required operations to perform prior to booting to OS using coreboot native driver when platform decides to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware. Additionally, move the PMCON status bit clear operation to `.final` ops to cover any such chances where FSP-S Notify Phase or any other later boot stage may request a global reset and PMCON status bit remains set. BUG=b:211954778 TEST=Able to build brya with these changes. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-15soc/intel/xeon_sp: Add function to clear PMCON status bitsSubrata Banik
This patch adds an SoC function to clear GEN_PMCON_A status bits to align with other IA coreboot implementations. BUG=b:211954778 TEST=None. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I22650f539a1646f93f2c6494cbf54b8ca785d6ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/61652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-15soc/intel/apollolake: Add function to clear PMCON status bitsSubrata Banik
This patch adds an SoC function to clear GEN_PMCON_A status bits to align with other IA coreboot implementations. BUG=b:211954778 TEST=None. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I982f669b13f25d1d0e6dfaec2fbf50d3200f74fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/61651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-15soc/intel/skylake: Add function to clear PMCON status bitsSubrata Banik
This patch adds an SoC function to clear GEN_PMCON_A status bits to align with other IA coreboot implementations. Additionally, move the PMCON status bit clear operation to finalize.c to cover any such chances where FSP-S NotifyPhase requested a global reset and PMCON status bit remains set. BUG=b:211954778 TEST=None. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie786e6ba2daf88accb5d70be33de0abe593f8c53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-15soc/intel/elkhartlake: Fix PCR ID for eSPIWerner Zeh
According to the Datasheet Volume 1 (doc #636112, [1]) the PCR port ID for eSPI is 0x72 (see chapter 25.2.2). Fix it in the header file. [1]: https://cdrdv2.intel.com/v1/dl/getContent/636112?explicitVersion=true Test=Read and modify PCR registers of eSPI controller. Change-Id: I5b07ef0f3a285f981791b1f4b4cdbda98ccf05ad Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61841 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-15soc/intel/common/block/pcie/rtd3: Fix bit checksAngel Pons
Fix always-true conditions to properly test whether a bit is set. Change-Id: Ibfeafe222c0c2b39ced5b77f79ceb0c679a471b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-15Revert "soc/intel/adl: Skip sending MBP HOB to save boot time"MAULIK V VAGHELA
This reverts commit 9a7fbbc98e8610a0a5314470edd8d5dafe676a06. SkipMbpHob UPD skips generation of MBP Hob within FSP. Skipping MBP Hob generation also skips syncing correct version of chipset data with CSE since FSP uses version information from MBP HOB. In absence of MBP Hob, FSP is unable to get version information and hence chipset data sync is skipped. This creates an issue while platform tries to enter deeper sleep states. BUG=b:215448362 BRANCH=None TEST= FSP can get version information from MBP HOB and chipset sync is performed. It has been Verified using FSP debug logs on Brya board. Change-Id: I9a160fee72b61ae9eecababf9a16900e6bd4acff Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-02-15soc/apollolake: Make IO decode / enable register configurableSean Rhodes
This allows the one 32bit register to be configured in the devicetree in the same way that Skylake can be. i.e. register "lpc_ioe". Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I598baca0f31b5350a4e6fdb7b7356fa6fb2d71ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/61195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-15soc/intel/cnl: Enable CSE FW sync for CSE LITE SKUMatt DeVillier
Boards based on google/puff baseboard (hatch variant) use CSE LITE, which utilizes RO and RW firmware. If the CSE does not switch to the RW firmware, the HECI1 interface is disabled, and dependent drivers (like SOF audio firmware) fail to load. Use the same logic as other platforms utilizing CSE LITE (eg, TGL/JSL) to check if an ME RW firmware update is available, and if not jump to the onboard RW firmware. Test: built/boot Manjaro 21.x on google/wyvern, verify CSE RW firmware loaded via cbmem console, HECI1 interface is present vis lspci, and the SOF DSP firmware is correctly loaded via dmesg. Change-Id: I0ae21adde4a64bbcc5fa4fb144436a0430e92280 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-15soc/amd/sabrina: Select ACP gen2Fred Reitberger
Select ACP gen2 for Sabrina Change-Id: I107ebd390732b597629a3236d0e7d1f5e2c51379 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-15soc/amd/common/acp: add acp_gen2Fred Reitberger
The gen2 ACP register definitions and locations are different from previous models. Specific code is refactored into acp_gen1 and acp_gen2. Update ACP register locations and definitions for gen2. Change-Id: If665b93cddf22435512f1276fcfee2f497dc6ef5 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-14soc/intel/graphics: Repurpose graphics_get_memory_base()Ethan Tsao
create SOC_INTEL_GFX_MEMBASE_OFFSET for platform to map graphic memory base if required, because it may vary by platfrom. BUG=b:216756721 TEST= Check default offset for existing platform and update platform specific offset in Kconfig under SoC directory. Change-Id: I6b1e34ada9b895dabcdc8116d2470e8831ed0a9e Signed-off-by: Ethan Tsao <ethan.tsao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61389 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-13soc/amd/common/include/ioapic: make IOAPIC IDs not depend on MAX_CPUSFelix Held
Since the APIC bus isn't used since a long time and the IOAPIC and LAPIC talk to each other via the system bus, there is no longer the requirement that the IOAPIC IDs mustn't overlap with the LAPIC IDs that start at 0 and end at CONFIG_MAX_CPUS - 1. The current Intel code uses 2 as the IOAPIC ID while most of their CPUs have more than 2 logical cores resulting in the IOAPIC having the same ID as one of the LAPICs. All chipsets in soc/amd use the defines for FCH_IOAPIC_ID and GNB_IOAPIC_ID for initializing the IOAPIC register, writing both MADT and IVRS ACPI tables and there's no MPTable support for those SoCs that might also rely on those IDs being consistent. This patch changes the definitions for FCH_IOAPIC_ID and GNB_IOAPIC_ID from CONFIG_MAX_CPUS and CONFIG_MAX_CPUS + 1 to 0 and 1. This also makes sure that the IOAPIC IDs still fit in 4 bits despite Cezanne having a CONFIG_MAX_CPUS of 16 resulting in the IOAPIC IDs being larger than 4 bits with the old code. While the Cezanne FCH IOAPIC supports 8 bits of IOAPIC IDs, this is non-standard. TEST=AMD Mandolin and Google Liara still work. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: Id3a356480bb8407e0347cb5cef691fde7edc8deb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-02-12soc/intel/apl: Use Kconfig to enable CseRbpSean Rhodes
This patch makes SKIP_CSE_RBP=y default for Apollo Lake if Boot Device is memory mapped and ensures SkipCseRbp UPD is guarded against this config. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ifd01a25443e2582a90529e55be8d34a88342a103 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-02-12soc/amd/cezanne/psp_verstage/uart: Fix off by 1 errorRaul E Rangel
FCH_UART_ID_MAX == 2, and there are 2 UARTS, so we don't need the -1. BUG=b:215599230 TEST=Build guybrush Found-by: Coverity CID 1469611 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f0171ed2d3da7f86ba3cfd0457f60d2d5722625 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61869 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-12soc/amd/cezanne: Allow to specify SPL table path in KconfigZheng Bao
BUG=b:216096562 Change-Id: I4a5ee335ea8808b595dc65ebafd15baedfbdd06e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-12soc/amd/common: Scan bridge devices behind SoCs GPU ControllerKevin Chiu
Scan devices behind SoCs GPU controller to expose more buses. BUG=b:204401306 BRANCH=guybrush TEST=emerge-guybrush coreboot Change-Id: Ib78e6570f101c71efaf9cc1843defcb05301cd30 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-12soc/mediatek: Fix printing SPM versionYu-Ping Wu
Currently the SPM version string is stored at the end of the blob, possibly without a trailing '\0'. Therefore, we should be careful not to print characters beyond the blob size. BUG=b:211944565 TEST=emerge-corsola coreboot TEST=SPM version looked good in AP console BRANCH=asurada,cherry Change-Id: Icfeb686539dc20cf5b78de77c27bdbb137b5d624 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/intel/common: Re-use Alder Lake-M device IDs for Alder Lake-NUsha P
Few of the Alder Lake-N Device IDs according to EDS, are named as ADL_M IDs in the current code. Hence rename those device IDs as ADL_M_N and use them for Alder Lake-N platform. Document Number: 619501, 645548 Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I6042017c6189cbc3ca9dce0e50acfb68ea4003f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-02-11soc/amd/common/acp: introduce acp_gen1Fred Reitberger
Refactor existing acp code into acp_gen1 variant as preparation for gen2 variant in sabrina. Change-Id: Id9248584237196b5404b79d3a8552cb90fe4491e Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-11soc/amd/common/fsp: check fsp image revisionJulian Schroeder
Check if FSP binary and coreboot FSP structures (fspmupd.h) match sufficiently. A change in minor number denotes less critical changes or additions to the FSP API that still allow for the boot process to proceed. A change of the AMD image revision major number will halt boot. The Fspmupd.h header now defines IMAGE_REVISION_ macros for AMD Picasso, Cezanne and Sabrina APUs. BUG=b:184650244 TEST=build, boot and check fsp image revision info. Example: FSP major = 1 FSP minor = 0 FSP revision = 5 FSP build = 0 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I0fbf9413b0cf3e6093ee9c61ff692ff78ebefebc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-11soc/amd/cezanne,picasso,sabrina: Fix incorrect values of CBFS amdfw position ↵Robert Zieba
makefile variables Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded. This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well. BUG=b:198322933 TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-02-11soc/amd/common/block/lpc/espi_util: add decode range register helpersFelix Held
Introduce and use functions to translate eSPI IO/MMIO decode range IDs into the corresponding register bits and the IO/MMIO range and size register IDs into register offsets. This is a preparation to support the additional eSPI decode ranges on Sabrina where not all enable bits and base/size registers for one type of decode ranges are consecutive. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id91fe32447a06b049e33dfdacc8edfa2ebb2df39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-11soc/amd/common/block/include/espi: rename IO/MMIO base/size registersFelix Held
This aligns the register names more with the PPR. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e7dc8dfc0fa5e86b9d4425f2496be86e039b686 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-11src/soc/intel/common/block/i2c: Use early BAR in ENV_PAYLOAD_LOADERTim Wawrzynczak
There may be occasions where an I2C device was initialized during "early initialization," but when used again in ENV_PAYLOAD_LOADER before resource allocation happens, it would currently return that it has not been assigned a BAR. However, because of the early BAR assigned to it, it should still be valid to use that until proper resources have been assigned, therefore return any BAR that may have been assigned to the device during early initialization. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8ab599199592a72ae96cd9f95accfaa0d84e66b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-02-11soc/mediatek/mt8186: Lower SPI NOR speed to 52MHizYu-Ping Wu
The current SPI NOR speed mainpll_d7_d2 (78MHz) is too fast for MT8186's HW design, which is capable of up to 52MHz. Therefore, lower the speed to univpll_d3_d8 (52MHz). BUG=b:218775654 TEST=emerge-corsola coreboot TEST=Boot time didn't increase significantly BRAHCH=none Change-Id: I5a03e41d4ce47d45b97a805b9b98877ef0dac7b7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-02-11soc/mediatek: Only update required bits when triggering WDT resetRex-BC Chen
To prevent to modify original value of wdt_mode, we use setbits32 to update required bits. BUG=b:218420108 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I743c1af3583c18ec8500fc1eb89f31cdbce5317c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61729 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-10soc/intel/common: Add Crash Log and PMC SRAM PCI device IDsTim Wawrzynczak
Add Alder Lake and Tiger Lake specific Crash Log and PMC SRAM device IDs. Document Number: 619501, 645548 Change-Id: I64b58b8c345bd54774c4dab7b65258714cd8dc9e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-02-10soc/mediatek/mt8173/dramc_pi_calibration_api.c: Remove duplicated "ERROR" in ↵Elyes HAOUAS
log message Change-Id: I846c21bd690372ec416fb3d3b3954bf181b0204c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09vendorcode/intel/fsp: Add FSP header file for Alder Lake N FSP v2503_00Ronak Kanabar
The headers added are generated as per Alder Lake N FSP v2503_00. Changes include: - Add all header files for Alder Lake N FSP. - List of header files: FirmwareVersionInfoHob.h, FspmUpd.h, FspsUpd.h, FspUpd.h, MemInfoHob.h - Select FSP_HEADER_PATH BUG=b:213828776 BRANCH=None Change-Id: I97afa6d47cc825703a8dc82216250bfc5e09dc9b Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-02-09soc/intel/common/gpio: Add PAD_NC_LOCK and PAD_CFG_GPI_SCI_LOCK macroEric Lai
Add PAD_NC_LOCK and PAD_CFG_GPI_SCI_LOCK macro to support mainboard to lock NC and GPI_SCI pins as applicable. BUG=b:216583542 TEST=build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie44d72f4152b55183d900228df3e3670358f7518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61655 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09soc/amd/common/block/psp: introduce AMD_SOC_SEPARATE_EFS_SECTIONFred Reitberger
On systems that use the first 128kByte of the SPI flash for the EC firmware, it is not possible to place the EFS/amdfw part at the lowest location in flash where the on-chip PSP firmware will look for the EFS, since this is at an offset of 128kByte into the flash which is where the cbfs master header resides when the main CBFS is placed right after the EC firmware. This patch introduces the AMD_SOC_SEPARATE_EFS_SECTION option that allows putting the EFS in a separate FMAP section that can be located right after the EC firmware FMAP section. The EFS FMAP partition is checked to ensure it begins at the expected location. Change-Id: I5ed0f76c9c9c9c180ee5f1b96f88689d0979bb5e Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-09soc/intel/alderlake: Define USB2_PORT_MAX_TYPE_C macroSridhar Siricilla
The patch defines USB2_PORT_MAX_TYPE_C macro to allow mark the type_c flag.The USB2_PORT_MAX_TYPE_C macro modifies the USB2 configuration to indicate the port mapped to Type-C and sets Max TX and Pre-emp settings. This is an extension to existing macro USB2_PORT_MAX. The change is required to enable port reset event on a USB2 port. This event is passed to USB3 upstream ports to upgrade back to super speed (USB3) after a downgrade during low power state. BUG=b:193287279 TEST=Build the code for Gimble board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I464f139d8e367907191c04f9170ac53d327776ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/61623 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-09soc/intel/common/cse: Add function to perform global reset lockSubrata Banik
This patch implements `cse_control_global_reset_lock()` as per ME BWG (doc: 627331) recommendation. It is recommended that BIOS should set this bit early on in the boot sequence, and then clear it and set the CF9LOCK bit prior to loading the OS in both an Intel CSME Enabled and a Intel CSME Disabled system. Note: For CSE-Lite SKUs BIOS should set CF9LOCK bit unconditionally. BUG=b:211954778 TEST=Able to build and boot Brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3894b2cd8b90dc033f475384486815ab2fadf381 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-02-09soc/mediatek/mt8186: Fix issue of clearing watchdog statusRex-BC Chen
The implementation of clearing watchdog status is wrong in CB:58835. The value written to the 'wdt_mode' register should be 'wdt_mode | 0x22000000' instead of 'wdt_status | 0x22000000'. BUG=b:204229208 TEST=check watchdog status is cleared. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8c5dbaab2ac43d3867037bc4160aa5af2d79284f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-09soc/mediatek/mt8186: Support DRAM fast calibration using blobXi Chen
For most MediaTek SoCs (MT8183, MT8192, MT8195) we rely on an external program (e.g., the "DRAM blob") to do the full DRAM calibration first, then store and and apply the generated parameters to the reference "fast DRAM calibration" in the vendor/mediatek folder for normal system boot. Starting with MT8186 the implementation of fast calibration may need to be changed, and a "DRAM blob" only path is introduced for devices that have to do both full and fast calibration using the external blob. TEST=fast calibration pass on kingler/krabby BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: If25a7dd6aa6261ecff79a1b4df8b1f2e53d896dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/61133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-02-08soc/amd/sabrina/Kconfig: remove SOC_AMD_COMMON_BLOCK_PCI_MMCONF TODOFelix Held
Sabrina uses the same MMIO_CONF_BASE MSR as the previous AMD CPUs to configure the PCI MMCONF base address. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7e3064bab5ca1e277b04f9aae98f9adabce75399 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-08soc/intel/quark/storage_test.c: Remove duplicated "ERROR" in log messageElyes HAOUAS
Change-Id: I7697512a63b58ca7d7200c74a409822389db0762 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-08soc/amd/cezanne: Disable CONSOLE_CBMEM_PRINT_PRE_BOOTBLOCK_CONTENTSRaul E Rangel
Now that PSP verstage can directly write to the UART, we no longer need to manually dump the cbmem contents. Ideally if we can get picasso to add support for mapping the UART, or if we implement bit banging we can delete this functionality completely. BUG=b:215599230 TEST=Boot guybrush and verify verstage logs aren't printed twice Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id70b24625c3b2f3d6fe470cf227a0083f5b974f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-08soc/amd/common/psp_verstage: Add UART support to PSP consoleRaul E Rangel
This will allow PSP verstage to write logs to the serial console. We are no longer dependent on using a serial enabled PSP boot loader. Ideally we would delete this psp printk and use the standard printk. Since picasso doesn't currently support mapping the UART though, I'll keep it for now. BUG=b:215599230 TEST=Boot guybrush and verify PSP logs are output on serial console Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ibd77cc754fae5baccebe7adc5ae0790c79236d26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-08soc/amd/sabrina/psp_verstage: Implement get_uart_baseRaul E Rangel
The Sabrina PSP doesn't support mapping the UART, so add a dummy function to return NULL. BUG=b:215599230 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idad8e4874e78bb96730feecb5a7b17334d12217c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-08soc/amd/picasso/psp_verstage: Implement get_uart_baseRaul E Rangel
The Picasso PSP doesn't support mapping the UART, so add a dummy function to return NULL. BUG=b:215599230 TEST=Build and boot morphius Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie1f033ff86ebb0f755a9a0b6ff293aa3c8bbbeb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:55:55 +0000