summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-06-14soc/amd/common/pi/agesawrapper: use IOAPIC ID definesFelix Held
Part of the soc/amd/stoneyridge code already uses the FCH_IOAPIC_ID and GNB_IOAPIC_ID defines. Use those defines in the remaining location to make sure that the IOAPIC IDs are always consistent between the hardware register, the MADT and the IVRS ACPI tables. TEST=Timeless build of amd/gardenia results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I410a6560de66889b153c8a66b8dc5474ac114ba7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-06-14soc/intel/broadwell/pch: Drop device NVS remaindersAngel Pons
Now that device NVS is no longer used as such, stop using it to store ACPI device settings consumed by the SSDT generator. Instead, provide the get_acpi_device_state() function to allow saving ACPI device BARs and activation state from other compilation units. Also, introduce an enum and a struct to ease handling device state. Tested on out-of-tree Compal LA-A992P, SerialIO SSDT does not change. Change-Id: I9e70bf71e808651cb504399dcee489a4d1a70e67 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52521 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-14soc/intel/broadwell/pch: Replace ACPI device NVSAngel Pons
The same functionality can be provided through a runtime-generated SSDT. The remaining parts of device NVS are removed in a follow-up. Since the SSDTs are only loaded after the DSDT (if loaded at all), using SSDT-provided objects outside method bodies is not possible: the objects are not yet in OSPM's ACPI namespace, which causes in ACPI errors. Owing to this, the operation regions used by the _PS0 and _PS3 methods need to be moved into the SSDT, as they depend on the SSDT-provided BAR1 values. Tested on out-of-tree Compal LA-A992P, generated SSDT disassembles with no errors and contains expected values. Linux does not complain either. Change-Id: I89fb658fbb10a8769ebea2e6535c45cd7c212d06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-14soc/intel/broadwell: Re-do SerialIO UART console supportAngel Pons
Use the same code from Lynx Point on Broadwell, and adjust as needed. Also add a config file to ensure the code gets build-tested. Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works. Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-14soc/intel/common/block/uart: Fix resources in ACPI modePatrick Rudolph
In ACPI mode the device cannot be enumerated and thus the payload and bootloader doesn't know about the active resources. An ACPI aware OS can use the _CRS to determine the active MMIO window. Mark the BAR0 as reserved if the device is in ACPI mode to make sure the BAR is reserved in e820 tables. Change-Id: I6079b1eb7b0c87c752515340aac8776244b30ca0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-14util: Add DDR4 generic SPD for MT40A512M16TB-062E:RWisley Chen
Add SPD support for DDR4 memory part BUG=b:190020997 TEST=none Change-Id: I423131cb674e1e5ec699c7a28e5b5e6746247b2a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55164 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-13soc/amd/cezanne: Supply SMBIOS/DMI Type 17 dataNikolai Vyssotski
Enable generation of DMI Type 17 data on Cezanne. BUG=b:184124605 TEST="dmidecode --type 17" in OS on Majolica Change-Id: Iaa89ee1ce6efa0280f17a443e07571a1190873a6 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-13soc/amd/picasso: Move Type 17 DMI generation to commonNikolai Vyssotski
Move dmi.c code to common/fsp to be shared among different SOCs. BUG=b:184124605 Change-Id: I46071556bbbbf6435d9e3724bba19e102bd02535 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-13soc/amd/cezanne: call boot_with_psp_timestampKangheui Won
if VBOOT_STARTS_BEFORE_BOOTBLOCK is set, call boot_with_psp_timestamp to migrate PSP timestamps into x86 timestamp table. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4d51802145263145d40908889de29147af54f50f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-12arch/x86/ioapic: Add get_ioapic_id() and get_ioapic_version()Kyösti Mälkki
Change-Id: I4ad080653c9af94a4dc73d93ddc4c8c117a682b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-11soc/amd/cezanne: remove warm reset flag codeFelix Held
The warm reset bit in the NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if something was written to the register, the NCP_WARM_BOOT bit never got set and the NCP_ERR register in I/O-space always reads back as 0x7f. [1] checked with PPR for AMD Family 19h Model 51h A1 (CZN) #56569 Rev 3.01 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I569372db9f36ec7bbc741f4d7312ade312daa70b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55101 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/amd/stoneyridge: Set missing RTC offsets for day alarm and centuryAnand K Mistry
On Linux, in order to set wake alarms >24 hours, the RTC Date Alarm field must be set to a valid non-zero value. If not, there are two consequences: 1. Alarms >24 hours don't work 2. The kernel will refuse to enter suspend because it can't resume as expected to service the alarm. Since the RTC Date Alarm and RTC AltCentury fields are supported on Stoneyridge, set them. This is a mirror of commit 041fcf5902 ("soc/amd/picasso/acpi: Set missing RTC offsets") for picasso. BUG=b:187516317 TEST=On a Chrome OS 'grunt' device, run `time powerd_dbus_suspend --suspend_for_sec=172800` and verify the system suspended and woke up after 48 hours BRANCH=grunt Signed-off-by: Anand K Mistry <amistry@google.com> Change-Id: I10831b982662e680fa71aa81d02935e1b7e7a7a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-11sc7280: Add target specific GPIO pin definitionsTaniya Das
Add GPIO pin details specific to SC7280 chipset for the consumers to be able to request for the gpio functionality as per their requirement. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: I63bcaed78a6eeb0e6fad857b89d40181613e50cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/55077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-06-11soc/intel/{common,alderlake}: Use generic name "Alderlake Platform"Sridhar Siricilla
Since common CPU ID between ADL-P and ADL-M CPU IDs, the patch renames all ADL-P and ADL-M Silicon CPUID macros and defines generic name "Alderlake Platform" as macro value. Also, this will avoid log ADL-M for ADL-P CPU and vice-versa. Although currently name field of "cpu_table" points to only "Alderlake Platform, but it is retained asa placeholder in future difference platforms. Please refer EDS doc# 619501 for more details. The macros are renamed as below: CPUID_ALDERLAKE_P_A0 -> CPUID_ALDERLAKE_A0 CPUID_ALDERLAKE_M_A0 -> CPUID_ALDERLAKE_A1 CPUID_ALDERLAKE_P_B0 -> CPUID_ALDERLAKE_A2 TEST=Verify boot on Brya. After change, relevent coreboot logs appear as below: CPU: ID 906a1, Alderlake Platform, ucode: 00000119 CPU: AES supported, TXT supported, VT supported MCH: device id 4601 (rev 03) is Alderlake-P PCH: device id 5181 (rev 00) is Alderlake-P SKU IGD: device id 46b0 (rev 04) is Alderlake P GT2 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ia06d2b62d4194edd4e104d49b340ac23305a4c15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55252 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/intel/elkhartlake: Update FSP-S FuSa related settingsLean Sheng Tan
Further add initial Silicon UPD settings for FuSa (Functional Safety). Disable all by default, due to FSP binary enable all by default. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I88264ba3e3f9f54ad949c55b230082d1fa289fa4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55342 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11cpu/x86/lapic: Replace LOCAL_APIC_ADDR referencesKyösti Mälkki
Note that there are assumptions about LAPIC MMIO location in both AMD and Intel sources in coreboot proper. Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/intel/elkhartlake: Update FSP-S PM & Thermal related configsLean Sheng Tan
Further add initial Silicon UPD settings for thermal and power management stuffs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I04ded059c36f18925b7a74c934fef2566c3db8fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/55335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-10soc/intel/elkhartlake: Fix gpio_soc_defs.h variable typoLean Sheng Tan
Fix GPIO_COM2_END from GPIO_RSVD_2 to GPIO_RSVD_12. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I670f4bec8f141da73428010371754746a455df25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55334 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/intel/elkhartlake: Use FSP from FSP repo by defaultLean Sheng Tan
Select 'HAVE_INTEL_FSP_REPO' so that the FSP binary from the FSP repository is used by default. Also, use the FSP headers from the FSP repository instead. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I0c1bcb07ed0f73e1d5ada5f6f16b84816c4ef3d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55229 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/mediatek/mt8195: Add base addresses for displayJitao Shi
Add disp_dsc/disp_merge/dp_intf/edptx base addresses. BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Change-Id: I694da1449154e5b167c10d6d43d25ee2c5c0ec36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55332 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/mediatek/mt8195: add power and power control for eDPJitao Shi
1. Add API of TVD_PLL1 mt_pll_set_tvd_pll1_freq() for setting rate. 2. Add API of TVD_PLL1 edp_mux_set_sel() for mux sel. 3. Add eDP power domain control. BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I9e43e0ffeb7b8bcd1786a8d2f5acbf22d5ab501f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55346 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/intel/tigerlake: Move MAX_CPUS to KconfigAndy Pont
Most of the Kconfig files for Intel SOC devices define the MAX_CPUS value within src/soc/intel/*/Kconfig. Move the definition there for Tiger Lake and remove from the mainboard Kconfig files. Signed-off-by: Andy Pont <andy.pont@sdcsystems.com> Change-Id: If145b9eb5d99821f4ce513118e4417d05f821ef5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-10soc/intel/tigerlake: Hook up FSP repositoryFelix Singer
Select `HAVE_INTEL_FSP_REPO` so that the FSP binary from the FSP repository is used by default. Also, use the FSP headers from the FSP repository and adjust some UPD names so that coreboot is able to use them. Also added new config FSP_TYPE_CLIENT/IOT. Respective mainboard Kconfigs to select right FSP_TYPE when using FSP repository. BUG=b:175957775 BRANCH=none Change-Id: I5e694b91be7734dd98665051a6a3d9eccab7dac7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2021-06-08soc/intel/alderlake/romstage: Drop ineffective FSP-M UPD `ChHashMask`Subrata Banik
FSP-M UPD ChHashOverride is default disable hence ChHashMask doesn't take any effect. Dropping ChHashMask assignment in coreboot. TEST=Able to build and boot ADL-P LP4 RVP. FSP-M UPD dump showed both UPDs are set to default value 0. ChHashOverride: 0 ChHashMask: 0h Change-Id: Ide1c9da27ca68fd36ff5b44910cfcedfcb12f232 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55272 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-08soc/amd: factor out acpi_soc_get_bert_region to amd/commonFelix Held
This also adds BERT table gerenation support for Cezanne, but since the functionality to populate the BERT memory region isn't implemented yet, this won't result in a BERT table being generated on Cezanne, since bert_generate_ssdt will always return false there. TEST=BERT ACPI table generation still works on AMD/Mandolin Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I69b4a9a7432041e1f4902436fa4e6dee5332dbd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-08soc/amd/picasso/agesa_acpi: add BERT supportFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14577e80e722cb5ccf344a4520cf3adde669fc5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-08soc/intel/common: Update CrashLog data length trackingFrancois Toguo Fotso
The CrashLog raw_data_length, previously used to track the length for the Intel CrashLog decoder, is causing noises in the Linux kernel for AMD. Hence this update made at the soc level which will enable the pulling put of the tracking from x86/acpi_bert_storage.c. BUG=None TEST=Built, and BERT successfully generated in the crashLog flow. Signed-off-by: Francois Toguo Fotso <francois.toguo.fotso@intel.com> Change-Id: I97ff14d62bda69389c7647fcbbf23d5cab2b36e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55006 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-08soc/amd/stoneyridge: use common BERT ACPI table generationFelix Held
Implement acpi_soc_get_bert_region so that the common ACPI code will generate a BERT ACPI table that points to the BERT memory region instead of generating the BERT table in the SoC=specific code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I86d4f5ef74d4d40cb93ac4a3feaf28b99022ebd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-08arch/x86/include/bert_storage: introduce bert_should_generate_acpi_tableFelix Held
Since bert_errors_present() is only available when ACPI_BERT is selected the ACPI table generation code needs to check that before calling the function, so add bert_should_generate_acpi_table that returns false when ACPI_BERT isn't selected or the return value of bert_errors_present() when ACPI_BERT is selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia955f627c190ea38e05b5aaedc7cb2d030274e83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55024 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-08acpi: rework BERT ACPI table generation logicFelix Held
Check if the ACPI_BERT Kconfig option is selected and only then try to generate the BERT table. Also remove the acpi_is_boot_error_src_present weak function from the ACPI global compilation unit and use the return value of acpi_soc_get_bert_region to determine if there is a valid BERT region with logged errors. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2a281f5f636010ba3b2e7e097e9cf53683022aea Reviewed-on: https://review.coreboot.org/c/coreboot/+/55054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-08soc/intel/alderlake: Set SaIpuEnable UPD according to devicetreeTim Wawrzynczak
The SaIpuEnable UPD is not currently being touched by coreboot; set it according to the enabled status of the corresponding devicetree node. TEST=turn ipu device on or off in devicetree, see device enumerated or not in OS, according to the devicetree setting. Change-Id: I53752f92c4b49093218cc34848727a72b63e84eb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55143 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-08soc/intel: Add Alder Lake's GT device IDSridhar Siricilla
Add Alder Lake specific graphics device ID. The document# 641765 lists the id 0x46a8. TEST=Verify boot on brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I6f36256505a3e07c6197079ea2013991e841401b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55256 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-08soc/intel/alderlake: Correct TCSS XHCI Port status offsetSridhar Siricilla
The patch corrects TCSS XHCI Port status offset and CPU USB2 port count. The information is captured from the ADL-P Processor EDS Volume 2b of 2 (DOC ID:619503). BUG=None TEST=Verified boot on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I20c77d78f52277a9a979e11303cdb6cdabae7c59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-06-07cpu/x86: Default to PARALLEL_MP selectedKyösti Mälkki
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-07soc/intel/adl: Add SKU specific power limits supportSumeet Pawnikar
Power limits (PL1 and PL2) depend on the specific SKU of the CPU. By expanding the SoC chip config power_limits_config member to an array indexed by ADL_*_POWER_LIMITS_*_CORE macros, the appropriate power limits are applied. Using this the correct set of power limits are being selected from the array based on system agent PCI ID. Based on this, chipset.cb file contains the set of power limits being used by varieties of ADL boards. These power limit values are as per document 619501. BUG=None BRANCH=None TEST=Built and verified the following console output on below boards On adlrvp (482): CPU PL1 = 28 Watts CPU PL2 = 64 Watts On adlrvp (682): CPU PL1 = 45 Watts CPU PL2 = 115 Watts On brya (282): CPU PL1 = 15 Watts CPU PL2 = 55 Watts Change-Id: Ic1676e2b4d611cdc85e770f131d5b6d5ecd180be Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2021-06-07acpi: rename acpi_soc_fill_bert and add return valueFelix Held
The return value indicates if the function has found valid BERT data and wrote them to the region and length parameters. This will be used in a follow-up patch to remove the acpi_is_boot_error_src_present function call in the common code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaaa3eed51645e1b3bc904c6279d171e3a10d59be Reviewed-on: https://review.coreboot.org/c/coreboot/+/55053 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07soc/intel/alderlake: Update ACPI device ID of IOMMaulik V Vaghela
ACPI device ID of IOM device has been changed for Alder Lake. Updating it to make it compatible with kernel TEST=ACPI ID is updated and kernel driver works as expected Cq-Depend: chromium:2936144 Change-Id: Ifdfcd0c1534e8204719e59e718688cd42e846e84 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-07soc/amd/common/fsp/pci: Add size field to PCIe interrupt routing HOBNikolai Vyssotski
EDK2 mandates HOB to be in increments of qword (8). This HOB has 13 elements which causes it be padded with 4 bytes of garbage. This results in coreboot failing intermittently with invalid data. Add "number of entries" field to specify the number of valid entries in the table. BUG=b:190153208 Cq-depend: chrome-internal:3889619 TEST=verify HOB is present and correct size (13) is reported Change-Id: Iaafae304f04a5f26d75a41a6d6fcb4ee69954d20 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55237 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07soc/intel/broadwell/pch: Drop P_LVLx support in FADTAngel Pons
IO MWAIT redirection is not enabled, and C-states are reported using the _CST ACPI object, which overrides the P_LVLx values. Change-Id: I3f71ef99396b56dbd960c507133c06a8eae55778 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-07soc/intel: Drop unused lpss functionsFurquan Shaikh
This change drops the following unused lpss functions and related code: * soc_lpss_controllers_list * is_dev_lpss These functions were added to determine if a controller is LPSS for performing IRQ configuration. But, these never got used and hence are being dropped. Change-Id: I27bdfbca7c199e823a0e4fdb277e3f22fb6bae7a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-07soc/intel/alderlake: Set Base Addresses for TBT DMA remapping enginesSridhar Siricilla
The patch configures 4KB memory region window for each of the TBT DMA remapping engine. So, the remap engines map their register set to the respective 4KB window. TEST=Verified boot on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I669255065d60d73c4bea0eeb732c4114bcc447c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55015 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07soc/amd/cezanne: Configure I2C Pad RX Select through devicetreeKarthikeyan Ramasubramanian
Some of the I2C buses are required to operate at different voltage level compared to other I2C buses eg. I2C bus to Google Security Chip (GSC) should be at 1.8V level. By default, all the I2C buses are initialized to operate at 3.3 V. Add support to configure I2C pad RX select through devicetree and update the concerned devicetree. BUG=b:188538373 TEST=Build and boot to OS in Guybrush. Ensure that the communication with GSC is fine. Build Majolica mainboard. Change-Id: I595a64736fdac0274abffb68c5e521302275b845 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-07cezanne/psp_verstage: add reset/timer svcKangheui Won
The new cezanne PSP release added support for these svcs. So add those functionality back to cezanne psp_verstage. BUG=b:187906425 Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Id542f5ed0762f582ea966466d67ed938ecb9c1f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-07psp_verstage: initialize i2c in soc_initKangheui Won
GSC is connected with AP via i2c bus so we need to enable i2c in psp_verstage. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I5f7b73be67a692ea7de31ae53bd111d0e4b6998c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55136 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-05soc/intel/alderlake: Add IDE-R and KT device into chipset.cbSubrata Banik
Add IDE-R and KT device to chipset.cb and leave it off by default. Change-Id: Iaa51e3dc107eb3f06ad7b2aad72a6bc112999d98 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-05soc/mediatek/mt8195: fix GPIO register offsetsZhiqiang Ma
Correct the offsets by MT8195 Register Map V0.2-1 chapter: 3.2 GPIO Controller (page 3272) Control register names: PUPD_CFG0 PU_CFG0 Signed-off-by: Zhiqiang Ma <zhiqiang.ma@mediatek.com> Change-Id: I9b0f8a24756092a97933cc9d4ba13a9e79c73e91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55163 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-05soc/mediatek/mt8195: Enable mt8195 auxadcZhiqiang Ma
Enable auxadc on MediaTek mt8195 platform. Signed-off-by: Zhiqiang Ma <zhiqiang.ma@mediatek.com> Change-Id: Ie79420e20c9ed6155791b490e1b5e4b44a579a49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-04soc/intel/alderlake: Add PMC ACPI interfaceTim Wawrzynczak
This ACPI interface is required by e.g., the intel/common/pcie/rtd3 driver, which is used by some alderlake boards. BUG=b:190080798 TEST=disassemble SSDT and find \_SB.PCI0.PMC.IPCS Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I59eae47e623587d35e394c9bff21481fcad2d6b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55172 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc: common: gpio: Add support for common GPIO driverTaniya Das
Add common gpio functionalities across qualcomm soc targets. This common gpio driver would allow the consumers to be able to configure gpio function, set/get gpio direction as input/output, configure the gpio as pull-up/pull-down, configure the gpio as an IRQ and also query the gpio irq status. The GPIO pin definition would be SoC specific. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Ia672130c6ca938d9284cae5071307637709480d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55076 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04sc7280: Reserve wlan & wpss dram regions index order correctedRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I8501e9ce52bb296bb42797d8b43fd38174b80550 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-06-04src/intel/xeon_sp: add hardware error support (HEST)Rocky Phagura
This patch adds the ACPI hardware error source table (HEST) support. This involves a few different parts: (1) The ACPI HEST table which is filled with the appropriate fields (2) Reserved memory which is used by runtime SW to provide error information. OS will not accept a HEST table with this memory set to 0. The ASL code to enable APEI bit will be submitted in a separate patch. Tested on DeltaLake mainboard with following options enabled SOC_INTEL_XEON_RAS After boot to Linux, the following will show in dmesg: HEST: Table parsing has been initialized Change-Id: If76b2af153616182cc053ca878f30fe056e9c8bd Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-04intel/common/block: Move mainboard api to tcss common blockDeepti Deshatty
As per the comments in CB:54090 mainboard api mainboard_tcss_get_port_info() is simplified and moved to tcss common block code. Signed-off-by: Deepti Deshatty <deepti.deshatty@intel.com> Change-Id: I7894363df4862f7cfe733d93e6160677fb8a9e31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-04soc/mediatek/mt8195: add SPM loaderDawei Chien
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value after booting up. Change-Id: Ia0f9b9f86e44b293c1cc47213946304c64aea75e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55140 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/mediatek: Extract spm_parse_firmware to commonRex-BC Chen
spm_parse_firmware can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54d9672aa9ee9078ec9fe3fa4f2e9fe860a50636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55139 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S storage related configsLean Sheng Tan
Further add initial Silicon UPD storage settings: - SATA - SD card - eMMC Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Id4145fcf156756a610b8a9a705d4ab99fe7b0bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD RP & USB related configsLean Sheng Tan
Further add initial Silicon UPD settings for: - PCIe root ports - USB Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I60afb78a7997b8465dd6318f3abee28f95a65100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55034 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD configs for graphic & chipsetLean Sheng Tan
Further add initial silicon UPD settings for: - graphics & display - chipset lockdown - PAVP - legacy timer - PCH master gating control - HECI This CL also enables HECI 1 in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I657f44f8506640c23049614b2db9d1837e6d44ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/54960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-03soc/intel/alderlake: Add new memory parts for ADL boardsAmanda Huang
Use currently global_lp4x_mem_parts.json.txt to regenerate SPD files for LP4x memory parts that can be used with ADL-based mainboards. BUG=b:186616388 Change-Id: I5e76a887f81d432adbcfc2f8956b44f4343db5c2 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-06-03soc/mediatek: Initialize SSPMRex-BC Chen
Load SSPM firmware and boot up SSPM in ramstage. This adds 23ms to the boot time. TEST=Load SSPM blob ok, and we can see some logs of SSPM from AP. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia227ea9f7d58129068cb36ec2de7d9feb677006b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-02soc/amd/picasso: remove warm reset flag codeFelix Held
Since the MCA(X) registers have defined values on the cold boot path, the is_warm_reset check can be dropped. Also the warm reset bit in the NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if something was written to the register or the machine went through a warm reset cycle, the NCP_WARM_BOOT bit never got set. [1] checked with PPR for AMD Family 17h Models 11h,18h B1 (RV,PCO) #55570 Rev 3.15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e6df98ffd5d15ca204c9847a76c19c753726737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-01soc/amd/cezanne/include/iomap: properly align definesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14647b3d88146602b96fc1dff2347a293bab0c26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01acpi: drop unused parameter from acpi_soc_fill_bertFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic354824468f016a7857c6990024ae87db6fd00bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/55052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-06-01soc/mediatek: Move the SSPM driver to commonRex-BC Chen
The SSPM driver can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{asurada, kukui} coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If9779853becb298eeeabb3dc6096bc474baae202 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55050 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01soc/intel/elkhartlake: Update FSP-S UPD LPSS related configsTan, Lean Sheng
Add Silicon upd settings for LPSS (GSPI/UART/I2C). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-31soc/amd/cezanne: Add pre-FSPM call to the mainboardMartin Roth
The Guybrush platform needs to set up some GPIOs immediately before the FSP-M runs. Add a platform specific call. This will be used in a follow-on commit. BUG=b:184796302, b:184598323 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I37d2625ff426347852e98a9a50f15368e0213449 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54638 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/amd/common/block/espi: Explicitly assert PLTRST#Raul E Rangel
PLTRST# is currently asserted and latched when eSPI_RST# gets asserted. If eSPI_RST# isn't used on a platform or it doesn't properly assert in all cases, then PLTRST# will never be asserted. This could result in the AP and EC being out of sync. BUG=b:188188172, b:188935533 TEST=Warm reset guybrush with partial #22 rework. Verify that peripheral channel is correctly reset. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I20d12edf3efc6100096e24aa8d1aec76bbde264f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-30soc/intel/alderlake: Add placeholder SPD fileTim Wawrzynczak
Change-Id: I38eb4bb684c511fff5ae148091c066682e9c35cb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-30soc/intel/elkhartlake: Update FADT tableTan, Lean Sheng
Update FADT table per relevant PM settings: Fix PM Timer block access size and disable C2 and C3 states for the CPU. Further on, set the century byte offset in FADT to point to the common location in CMOS. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I72a57bf8ec61c3eabc4522c2695ae4b16979f188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54958 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/intel/elkhartlake: Update FSP-M UPD related configsTan, Lean Sheng
Upload the FSP-M UPD configs. This CL also updated the chip.h and devicetree.cb with the relevant variables and configs. This CL also updated the GPIO related settings (PMC & SD card) in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If6321064b37535b390cf3dd7c41a719c598a0cd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-28soc/amd/picasso: fix MCACHE on psp_verstage RO bootKangheui Won
On RW boot path psp_verstage call cbfs_map which calls chain of _cbfs_alloc, cbfs_boot_lookup and cbfs_get_boot_device. Then cbfs_get_boot_device initializes MCACHE which is used later. However on RO boot path psp_verstage doesn't try to find anything in the CBFS which results RO MCACHE not to be initialized. Add cbfs_get_boot_device(true) to explicitly initialize MCACHE on recovery boot. BUG=b:177091575 BRANCH=none TEST=build and boot jelboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6c4b522fef5a4affd215faa122bdf6b53190cf3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54711 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27soc/amd/common/block: Fix missing include in acp.hRaul E Rangel
We were missing the stdint.h header, and the header was sorted incorrectly in chip.h BUG=non TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I209d3c9c48e5b06b2a56759af51cf2858eb99f51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-27soc/amd/cezanne: add devicetree setting for PSPP policyFelix Held
This allows boards to specify which PSPP policy (basically a dynamic trade-off between power consumption and PCIe link speed) should be used and also makes sure that the boards are using the expected PSPP policy and not just the UPD default from the FSP binary that has already changed once during the development. BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1b6459b2984711e72b79f5d4d90e04cb4b78d512 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54930 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27soc/intel/tigerlake: Return TBT PowerResource from PR0 and PR3John Zhao
TBT PowerResource _ON/_OFF methods are currently invoked by _PS0 and _PS3 respectively. It is defined for ACPI driver to call _ON and _OFF methods. This change drops the _PS0 and _PS3 call for _ON/_OFF and returns TBT PowerResource declaration in the _PR0 and _PR3, then ACPI driver will call the TBT PowerResource _ON and _OFF methods. BUG=b:188891878 TEST=Traced both of TBT _ON and _OFF methods invocation and execution at run time. Verified TBT's power_state to be D3Cold. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I398b3f58ec89f98673cbbe633149d31188ec3351 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/amd/picasso/mca: use MCAX registers instead of legacy MCAFelix Held
This patch also adds the additional 10 MCAX registers to the BERT MSR error record. BUG=b:186038401 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I31912d3b3e77e905f64b6143042f5e7f73db7407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-26soc/intel/alderlake: Update soundwire master countSugnan Prabhu S
This patch includes changes to update the soundwire master count. Change-Id: Iffaf90569c19fb5ca3ce4775cc6dc6f8093f7c52 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/intel/common: Implement TBT firmware authentication validity checkJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change implements the valid_tbt_auth function. Thunderbolt DSD and its corresponding IMR_VAID will be present to kernel only if its authentication is successful. BUG=b:188695995 TEST=Validated TGL TBT firmware authentication and its IMR_VALID into SSDT which is properly present to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3c9dda341ae6f19a2a8c85f92edda3dfa08c917a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-26soc/intel/alderlake: Add validity for TBT firmware authenticationJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change adds the TBT firmware IMR status register offset and its authentication valid bit for valid_tbt_auth function usage. BUG=b:188695995 TEST=Built coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I742a00b6b58c45c1261f06b06a94346ad0a74829 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54888 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/intel/tigerlake: Add validity for TBT firmware authenticationJohn Zhao
After Thunderbolt firmware is downloaded to IMR, its authentication validity needs to be checked. This change adds the TBT firmware IMR status register offset and its authentication valid bit for valid_tbt_auth function usage. BUG=b:188695995 TEST=Built Voxel coreboot image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia25827f18a10bf4d2dcabfe81565ac326851af3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54709 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/amd/cezanne: add support for the changed AMD FSP API for USB PHYJulian Schroeder
The AMD FSP is using a new structure for USB and USB C phy settings. This patch removes old, unused structures, adds the new one and enables the devicetree interface for it. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I011ca40a334e4fd26778ca7f18b653298b14019b Reviewed-on: https://review.coreboot.org/c/coreboot/+/54065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-26soc/intel/elkhartlake: Minor fix for SCS & XHCI devices in ACPITan, Lean Sheng
1. Remove the extra UAB devices in xhci.asl 2. Update SD controller ADR in scs.asl 3. Remove the unused SCS PID Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1906fb4e6893dc5e2b0bc8d85f4a7b2efc85c3a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54867 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/intel/elkhartlake: Update SA & IGD DIDs TableTan, Lean Sheng
Update SA & IGD DIDs table as per latest EDS (Doc no: 601458). Add extra SKUs and fix the mismatched SKU numbers accordingly. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I62fd9e6a7cf0fc6f541f3d6d9edd31d41db7279f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-26soc/intel/common/block/smbus: Use `pci_dev_read_resources()` in read resourcesPaul Menzel
scan-build found a dead assignment, that the value stored to `res` is never read. Use `pci_dev_read_resources()` instead, as done in `sb/intel/common/smbus_ops.c` since commit 5f734327 (sb/intel/common/smbus_ops.c: Clean up read resources) avoiding the assignment. Change-Id: Ic59063b05a45dca411bf5b56c1abf3dd66ff0437 Found-by: scan-build (coreboot toolchain v0ad5fbd48d 2020-12-24 - clang version 11.0.0) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54904 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26qemu-q35,xeon_sp: Drop HAVE_SMI_HANDLER conditional with smm-classAngel Pons
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I64bdcb28a996609111861ebafe172493b0650354 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54852 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Rocky Phagura Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/amd/common/block/espi: Fix typo in espi_setup_periph_channelRaul E Rangel
ESPI_SLAVE_CHANNEL_READY is a read-only bit from the host perspective. It is set when the eSPI peripheral has configured the channel. We actually want to set the ESPI_SLAVE_CHANNEL_ENABLE flag. This never caused an issue before because the peripheral channel is enabled by default after PLTRST# is deasserted. This does fix the case where periph_ch_en == 0. It now properly clears the enable flag. BUG=b:188188172, b:188935533 TEST=Boot guybrush to OS, perform warm reset Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I24e0734d5652601ae9c967da528fec5e3f780991 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-26soc/mediatek/mt8195: Initialize MCUPMalex.miao
Load MCUPM firmware and boot up MCUPM in ramstage. TEST=can see MCUPM log from AP console Signed-off-by: alex.miao <alex.miao@mediatek.corp-partner.google.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9e8c45ce7166644b94319ec2e7836d3d3c8008dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/54899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek: Move the MT8192 MCUPM driver to commonRex-BC Chen
The MPUCM drivers can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I07a66bcf5a149582f34df1cfd08b5514fc5c2eb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek/mt8195: Change fsrc source to ulposcchun-jie.chen
Set fsrc source to ulposc_d10 for 26m off low power scenario. Signed-off-by: chun-jie.chen <chun-jie.chen@mediatek.com> Change-Id: Ifb02d32820944d7cfbbf23de638e9a0e82b5e84d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54870 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25soc/amd/common/block/espi: Increase ESPI_CH_READY_TIMEOUT_US to 10msRaul E Rangel
The ChromeEC might take longer than 1ms for the peripheral channel to be enabled. The PLTRST# interrupt handler takes about ~539us. This doesn't account for the time it takes for the interrupt handler to be scheduled. Increasing the timeout to 10ms gives ample time. BUG=b:188188172, b:188935533 TEST=Boot guybrush and no longer see channel enable errors Suggested-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib6db577bf06175ceb17b446af706ad8c9f891481 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54788 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25soc/intel/alderlake: Fix SA_DEVFN_CPU_PCIE6_*Tim Wawrzynczak
Change-Id: I8849f6dd2a9fdb16642de423cc82dcefd5b192ac Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54682 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22soc/amd: reduce MCACHE size with psp_verstageKangheui Won
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but we have limited space on the PSP thus cannot afford it. BUG=b:177091575 BRANCH=none Signed-off-by: Kangheui Won <khwon@chrmoium.org> Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-22util/spd_tools/lp4x: Add new memory part to to global memory definitionDtrain Hsu
This new definition is for MT53E512M32D1NP-046 WT:B used on Cret. BUG=b:183057749 TEST=Generate SPDs Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ica5df61d96d2c4cbe62a560a53bd3bd08eb121f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-22soc/amd/cezanne,picasso/reset: use byte I/O read for NCP_ERRFelix Held
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The variable the result gets assigned to is also a uint8_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-21soc/intel/common: Add Alder Lake device IDsSumeet R Pawnikar
Add Alder Lake specific Host and Graphics device IDs. As per latest document number: 619501, these IDs got an update. Change-Id: I548a903714ccc7470f1425ac67c0c66522437365 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54674 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21soc/amd/cezanne,common,picasso: use BERT region reserved by FSP driverFelix Held
commit ce0e2a014009390c4527e064efb59260ef4d3a3b (drivers/intel/fsp2_0: use FSP to allocate APEI BERT memory region) adds a mechanism to reserve the BERT region inside the coreboot code, so we can get rid of the workaround to reserve it in the FSP and return the location in a HOB. mcfg->bert_size defaults to 0 which makes the FSP not generate the corresponding HOB, but that field is planned to be removed at least on Cezanne, so don't explicitly set it to 0. BUG=b:169934025 TEST=BERT table that gets generated in a follow-up patch for Picasso points to expected BERT region and Linux is able to access, decode and display it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaca89b47793bf9982181560f026459a18e7db134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21soc/intel/common: Add function to lpc_lib to return PIRQ routingTim Wawrzynczak
In order to fill out static entries for a _PRT table for soc/intel/common, the PIRQ<->IRQ mapping is required. This patch adds a function lpc_get_pch_pirq_routing() which returns this mapping. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib215fba54573c50a88aa4584442bd8d27ae017be Reviewed-on: https://review.coreboot.org/c/coreboot/+/50858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-20soc/intel/xeon_sp: Skip locking down TXT related registersArthur Heymans
When locking down TXT is skipped, e.g. to do error injection, locking down DMI3 and IIO DFX related TXT registers should also be skipped. Change-Id: Ieef25c02ec103eaef65d8b44467ccb9e6917bb6c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50238 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Rocky Phagura Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/intel/broadwell: Use Lynx Point IOBP codeAngel Pons
Change-Id: I89832dd6089e1961b4ffdb5661dc98b26a5cb0a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52515 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/amd/common: Show espi init in logMartin Roth
BUG=None TEST=See espi init messages in the log. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9f856402ed9a026427d3529e6d61450b0623fe48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:03:59 +0000