| Age | Commit message (Collapse) | Author |
|---|
|
When CSE jumps between RO and RW, it triggers global reset so the
AP goes down to S5 and back to S0. For Chromebox, when AP goes
down to S5 EC set AP_IDLE flag. This cause an issue to warm reset
the Chromebox device when it is in recovery mode and powered by
USB-C adapter. This patch allows AP to direct EC to clear AP_IDLE
flag before trigger reset.
BUG=b:296173534
BRANCH=firmware-dedede-136-6.B
TEST=Chromebox DUT which is powered by USB-C adapter boots up
after warm reset in recovery mode
Change-Id: Ib0002c1b8313c6f25d2b8767c60639aed8a4f904
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77632
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8515407eb10e1a74f37ea5a80fa31533c38badec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77455
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ensures that ITBT is ready to operate.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If60404a88208c632cd60e8aaa6ba70494eefbed2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77454
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The ACPI used for Tiger Lake, Alder Lake and Meteor Lake are very
similar, so can be moved to shared code.
This commit aligns minor difference between then, such as comments and
tabs/spaces.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If6554c7ef9e83740d7ec5dcca6a9d7e32fb182db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77453
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EFS data structure diagrams in the Makefiles of Picasso and newer
SoCs were wrong, since the BIOS directory table pointer is in a
different location than shown in the diagram. Since the diagram also
wasn't that easy to understand and amdfwtool does all of that handling,
drop the wrong diagram from the Makefiles.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f86fea29f956ff10746d35dbe967a4a89e11cca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
commit f8ac3dda02f22ebf857efb5b845db97f00598f7d ("soc/intel/common:
Order the CPUs based on their APIC IDs") sort algorithnm walks all the
`cpu_info' entries without discarding empty ones. Since `cpu_info' is
not initialized, the data that is used is undefined and it generally
results in the creation of invalid `Local x2APIC' entries in the
MADT ("APIC") ACPI table.
Depending on the X2APIC ID value the Linux kernel behavior
changes (cf. arch/x86/kernel/acpi/boot.c::acpi_register_lapic()):
1. If (int)ID >= MAX_LOCAL_APIC (32768), the Linux kernel discards the
entry with the "skipped apicid that is too big" INFO level
message.
2. If (int)ID < MAX_LOCAL_APIC (32768) (including negative) this data
is taken into account and it can lead to undesirable behavior such
as core being disabled as (cf. "native_cpu_up: bad cpu" ERROR
kernel message).
TEST=Verified the MADT does not contain any invalid entries on rex.
Change-Id: I19c7aa51f232bf48201bd6d28f108e9120a21f7e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77615
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
It makes the detection of this feature accessible without the
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU dependency.
BUG=288978352
TEST=compilation
Change-Id: I005c4953648ac9a90af23818b251efbfd2c04043
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77697
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1dbfca33c437c680118eb3a92e60b5607c93e565
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77768
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25e3cf15a77cf61a60bd31519eae019742842389
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I5b0cdb7b8484080db6571d70ddef145bbaf2e87d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77769
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2866dcdd6900c98310b4b3736b40ebe4eaa77ea2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77719
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I57b54653bd29a728825210403c8f426eb1c9cc48
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:299137940
TEST=Able to build and boot google/rex to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: I7d7b678227a6c8e32114de069af8455b8c1aa058
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Instead of reporting all I2C controllers in the system as enabled in the
corresponding ACPI device's _STA method, report the I2C devices that are
disabled in the devicetree as disabled in the corresponding _STA method
too. This is done by returning the contents of the STAT variable inside
each device's scope in the DSDT that have a default value of 0 (device
not present/disabled). For all enabled and hidden I2C devices
i2c_acpi_fill_ssdt gets called which then writes 0xf (device enabled and
visible) or 0xb (device enabled, but hidden) to the STAT name inside the
same scope, but in the SSDT. This object in the SSDT will then override
the default in the DSDT resulting in the _STA method returning the
correct status of each device. The code was inspired by
commit 7cf9c7451808 ("soc/amd/*: Fix UART ACPI device status").
TEST=On Mandolin all I2C controllers are disabled and with this patch
none shows up in the Windows 10 device manager. When enabling an I2C
controller in the devicetree for testing, it shows up again in the
Windows device manager.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cd9f447ded3a7f0b092218410c89767ec517417
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I9ecd81ffaa48dbed225a23900704b259569cb7c8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77527
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Per the PSP team, this field in the transfer buffer isn't used anymore
and always set to zero, causing devices to incorrectly report having
pre-production silicon.
Change-Id: Ida4bf4b9328ac83d905e4c3f822e6ceabe9be79d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77630
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
We don't have file for the fuse chain, but we need to set the level
for some cases.
Change-Id: Idb546f761ae10b0d19a9879a9a644b788828d523
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I639fb1e911a7449d0db0d2bfcfbb6f4f225b0cef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Specify the default path to, and automatically include the FSP binaries
needed to boot a board if USE_AMD_BLOBS is selected. Simplifies board
configs, and matches use in previous patforms.
TEST=build/boot google/skyrim
Change-Id: Ic837d264327723c8dc18a60fb16e8d41fe38b44e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77625
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Automatically include the FSP binaries needed to boot a board if
USE_AMD_BLOBS is selected. Simplifies board configs, and matches
use in soc/amd/picasso.
TEST=build/boot google/guybrush
Change-Id: I5b6e34085410a2aafe5d7876be5097f28f521ce8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77624
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames `SAVE_MRC_AFTER_FSPS` config to
`FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon
SP FSP implementation, where the FSP Silicon Init API produces
Non-Volatile Storage (NVS) instead of the FSP-Memory Init API.
According to the FSP 2.x specification (section 11.3), the FSP
populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and
expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB
after the FspMemoryInit() API in API mode.
However, not all Intel SoC platforms that support the FSP 2.x
specification adhere to this requirement. For example, the FSP binary
for XEON SP platform produces NVS data (aka
FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API.
Therefore, attempting to locate NVS data after the FspMemoryInit() API
on these platforms would result in an error. The `save_mrc_data.c`
implementation provides the required hooks to locate the NVS post
FSP-Silicon Init and store into Non-Volatile Storage.
BUG=b:296704537
TEST=Able to build and boot Intel Xeon SP w/o any functional impact.
Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch ensures that the VR configuration for IA, SA, and GFX is
properly initialized, assigning zero values to VR causes a black screen
(no display) issue.
Problem Statement:
Override CEP (Current Excursion Protection) value with zero aka set to
disable results into black screen issue (no display).
Solution:
Keep CEP default enabled and don't override w/ zero value.
w/o this patch:
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x0
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x0
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x0
w/ this patch:
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x1
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x1
[SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x1
Change-Id: I8908e8b6c995390b559212d456db6ddf984448a3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
All of the SoCs in the cannonlake directory select the following
options. So move them to the common option SOC_INTEL_CANNONLAKE_BASE
in order to deduplicate selections.
* FSP_USES_CB_STACK
* HAVE_INTEL_FSP_REPO
* SOC_INTEL_CONFIGURE_DDI_A_4_LANES
Change-Id: I6ce5edb2ba2c138b44601b32c3ecba2e761136f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77447
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Intel Cannon Lake was removed with commit d456f65056. Thus, remove this
dead code.
Change-Id: I53cd9d53b01e26f530684aa9c404f50b305c1f54
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add SA_DEV_SLOT_GNA definition to SoCs missing it, so the name
resolves properly.
TEST=tested with rest of patch train
Change-Id: I31c8b14e5083fc8e212a4e32330125fa72696c73
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Allows boards which enable the GNA device to provide an attachment
point for the OS drivers.
TEST=tested with rest of patch train
Change-Id: I3398eefb80e4407594883dd39128cd7885105ac3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove MAILBOX word from CPU_CRASHLOG_MAILBOX_WAIT_STALL
and CPU_CRASHLOG_MAILBOX_WAIT_TIMEOUT macros, because they
can be used for other interface as well.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I62b04fa4b05c427db494a536ca6504db02dfeb68
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Region with metadata tag contains information about BDF entry for
SOC PMC SRAM and IOE SRAM. We don't need to parse this as we already
define BDFs in soc/pci_devs.h for these SRAMs. Also we need to skip
to region as it does not contain any crashlog data.
BUG=b:262501347
TEST=Able to build google/rex. Able to trigger crashlog and decode
correctly.
Change-Id: Id8ed40b865cde8e89045f5c9e713398fcbff5890
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76834
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When parsing descriptor table the record can have tag type = 7.
This tag contains metadata depending on SOC. The platform may
choose to parse it based on implementation of crashlog.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I60dda06950974f7949fa5635141e4b7798c4d1f2
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
CPU crashlog discovery table and crashlog record is considered
invalid if first 32bits of the table is either 0x0 (no crashlog)
or 0xdeadbeef (invalid crashlog).
Crashlog record is considered consumed if bit 31 is set. So in this
case stop processing the subsequent records.
BUG=b:289600699
TEST=Able to build and verified invalid records are skipped on
google/rex.
Change-Id: Ia81bd293a533217425e44473ae85b2115c85faf6
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76333
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPUID CPUID_METEORLAKE_B0 onwards the discovery table offset needs
to be left-shifted by 3.
Reference: EDS Vol 1 (640228)
BUG=b:289600699
TEST=Able to boot google/rex with crashlog enabled.
Change-Id: I90647fb6190a52b42298398263978beaf931b035
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This adds a dummy soc (genoa) based on EXAMPLE_MIN86 with
amd linker script hooked up.
Default to 64bit code as that will be a sensible default for this
platform (high memory access required for RAS setup).
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I69253466084d17c4359d7e824d69f12490b076e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76495
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Older FSP releases don't have an option to do MP init via PPI, so it
should not be visible.
Change-Id: I74b4bd5dd72980b859763e89ead7d7f619321e66
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63759
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The amdfw.rom is mostly in region COREBOOT. Calculate the relative
address as the CBFS module address. That is for future 32M flash size
support.
TEST=binary identical test on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
This commit is part of a series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: I2add8e4e6755e582b3be6a150cf83d1468f2f1be
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72961
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is based on work by Arthur Heymans, 69852.
Get rid of the confusing "position index" and use the relative flash
offset as the Kconfig setting instead.
TEST=binary identical on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
(The test should be done with INCLUDE_CONFIG_FILE=n)
Change-Id: I26bde0b7c70efe9f5762109f431329ea7f95b7f2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The Genoa SoC supports MMIO addresses larger than 48 bits. Since the
MMIO base and limit registers in the data fabric only contain bits 16 to
47 of the MMIO address, the MMIO address extension register is
introduced on some SoCs like Genoa. This additional register contains
the upper bits of the MMIO base and limit. Since it's not available on
all SoCs, introduce the SOC_AMD_COMMON_BLOCK_DATA_FABRIC_EXTENDED_MMIO
Kconfig option to select the correct data_fabric_get_mmio_base_size
implementation to be added to the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic304f5797bc5661c1d511c95e457c6dde169d329
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77514
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
This patch adds option to override Fast Vmode on Meteor Lake SoC.
This requires CepEnable, EnableFastVmode, IccLimit FSPM UPDs in FSP
header. If the hardware supports Fast Vmode, the FSPM will set the
ICC limit value to the value passed from coreboot.
With CepEnable and EnableFastVmode enabled, if IccLimit is not
specified by coreboot, FSPM sets IccLimit as default value. If no
values assigned to all the three CepEnable, EnableFastVmode and
IccLimit, coreboot sets their values to 0 and Fast Vmode is disabled.
BUG=b:286809233
TEST=In debug MTL FSP logs, the value of FSP parameters is as passed
from coreboot including enable_fast_vmode, cep_enable, and
fast_vmode_i_trip. Also, fast_vmode_i_trip value is passed to pcode
using mailbox command without any error. This test done on google/rex
board.
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: Id05dccac56c504523f9327babe0c6fbeff488ec2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75566
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
The !CONFIG_SOC_AMD_COMMON_BLOCK_APOB_NV_DISABLE comment was likely a
copy-paste leftover, so remove it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45b12d1dc5af84be99d54fea0c9ccf610cf5dae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This reverts commit 5013c60a871af8fbce8c38a1c342c454e5b8452f.
Reason for revert: consecutive reboots are causing kernel panic.
BUG=b:297153853
TEST=Able to perform 50 cycles of consecutive reboot after reverting
this CL and it boots to the OS every single time(w/o any kernel panic).
Change-Id: If6c96dcc62c706a522b98a1cf1dd1920ad6473a1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77467
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The psp_transfer.h file was the same under all SoCs, and is really
tied to the file common/vboot/transfer.c, not the SOC.
This patch makes an include directory under vboot to put the header into
and sets it to be included for all SoCs using SOC_AMD_COMMON. This makes
the header file available to all platforms, so that new chips that don't
use the psp_verstage don't have to make a psp_transfer.h file just to
satisfy the compiler.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b9f2adee3a1d4d8d32813ec0a850344b7d717b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77303
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new block for handling overclocking watchdog. The watchdog is
present since Skylake or maybe even earlier so it is safe to use with
most of the microarchitectures utilizing intelblocks.
The patch adds the common block for initializing and feeding the
watchdog. Timeout is defined statically in Kconfig and should be set
high enough by the board or SoC Kconfig to let the board boot with
full memory training and avoid reset loops. Full training of 128GB
DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs
with newer memory technologies and higher RAM capacity may take more.
The default has been set to 10 minutes.
The patch also adds support for feeding watchdog in driverless mode,
i.e. it utilizies periodic SMI to reload the timeout value and restart
the watchdog timer. This is optional and selectable by Kconfig option
as well. If the option is not enabled, payload and/or software must
ensure to keep feeding the watchdog, otherwise the platform will
reset.
TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets
after some time. Enable the watchdog in driverless mode and see the
platform no longer resets and periodic SMI keeps feeding the watchdog.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two missing mapping for GPIO GPE routes
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I3f0d13cf7c07201856e934f22efc4cc8c4ea5bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77423
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `use_8254` should be flipped, the same as the other Intel
SOCs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2d6c859c0910b796d2ae5874a560ff9974578106
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The Genoa server SoC has 4 IOHC PCI roots instead of the 1 the mobile
SoCs have, so add the additional 3 SMN base address definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I72dba39bff7c7a739e1dfddd80e7f22e65b5f139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77395
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Those values need to match with the ones defined in PMC PWRM
GPIO CFG register.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I8e84df83caab794e2fe7186e89e78343c2b55fd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add a pmc.h file, which is needed for OC watchdog compilation. The PMC
definitions from pm.h are moved to pmc.h.
TEST=Build UP Squared and Intel GLKRVP sucessfully.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2726aaae1ce60d15a3944dadcf793def2dcb3a1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
GPT timer init is no longer needed after DRAM blob is switching to ARM
arch timer.
BUG=b:229800119
TEST=boot to kernel
Change-Id: Iec1f93c96e791220feed4225959ef15c074ba577
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77388
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPDX license header for this file did not match the license text
in the file.
Update the SPDX header and remove the license text.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifc0db79e43df6d14b80b0ad3061fe42de17ed90f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77379
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: If3c2e5bd9ee7e0f77d0c39ffe2ca9ad17b77d9bd
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Set EnforceDdrMemoryFreqPor to 0 for RMT builds. This is needed
for proper functioning when EnforcePopulationPor is set to 1.
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: Icf4fe01ac9b546830334717dbfa53782d2a85ba1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on "MediaTek_EFUSE_MT8188_Confidential A_Technical Doc.docx",
MT8188G used in ChromeOS project does not support clock hardware
monitor. Thus, we can simplify the initialization flow by removing the
hardware default value check.
BUG=b:292866009
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I07cd753f153da5b0aea1518a04a818214f986aeb
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77334
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ifd2e0043122946211aceb5ff88db0314de720fb9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77336
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move specific options under the boolean and remove dummy
SOC_SPECIFIC_OPTIONS.
Change-Id: I6ae52ceb61489e5a050a60d1fbbf4250960407eb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The RPL PCH uses a different ACPI Device ID than ADL PCH.
Ref: Intel 700 Series Chipset Family PCH Datasheet, Volume 1 (#743835)
Change-Id: I03f47a43ff985213ad617e834db7f974f687d877
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Similar situation happened last year when IoT FSP for ADL-S came out
before the Client FSP variant: https://github.com/intel/FSP/issues/83
It seems IoT FSP publishes the MemInfoHob.h file much later due to
legal reasons. Hack the missing file to get the builds using RPL-S IoT
FSP from repo working properly.
This change could be merged, subject for later revert (when the header
file is published).
Change-Id: Iec35db4573a3c3d011e4c1edf1c82a5c34438695
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
PchPcieClockGating and PchPciePowerGating UPDs are not yet available
in RPL-S IOT FSP. It also looks like those UPDs are not generally
available in all public RaptorLake FSP headers yet, so guard it
against SOC_INTEL_RAPTORLAKE to avoid build errors.
Change-Id: Iedac21bafa3428957e054fc8fefa38f9f776772d
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77337
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I21db0474157ba20cdf3eaef086aaf29fde29d6c5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76701
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6f2dc0fcc4392f77b8011221c0cf22af5da45172
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Remove unused HPET_BASE_ADDRESS.
It is already defined at <arch/hpet.h>.
Change-Id: I8c517283e56915873b8e1798571642fd9d8a5764
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Change-Id: Id0adfd0e25806aef836f75e83ff86a55a5d799d6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
broadwell/pch/Kconfig is sourced if SOC_INTEL_BROADWELL is true. So
remove 'if SOC_INTEL_BROADWELL' condition and duplicated
'INTEL_LYNXPOINT_LP'
Change-Id: I9b5676fd232b47e9d5f89f7faffdfd5d2c76984e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76699
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IOE_PMC support was not enabled on Meteor Lake platforms. This patch
adds the bare minimum hooks to initialize and allocate a memory region
for IOE operations. Additionally, this patch moves those IOE operations
to a newly included IOE-specific file, Previously, PMC was responsible
for these operations.
BUG=b:287419766
TEST=build and verified on google/rex.
Change-Id: I8bbc0b8a3e32dad5404c80bc7717ef07e3ec60b9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77261
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow users of Alderlake N processors to use the microcode repository
and also add their related microcode blob to the list of microcodes
which should be included in the coreboot rom.
Change-Id: I11c9cb13fa81118bfcb819bad5fb39731c7e3e76
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
This patch implements `soc_is_ish_partition_enabled()` override to
uniquely identify the SKU type between ISH and non-ISH to conclude
if ISH partition is enabled and need to retrieve the ISH version from
CSE FPT by sending a HECI command.
BUG=b:285405031
TEST=Able to uniquely identify the ISH SKUs while booting
to google/rex_ec_ish to dump the ISH version.
Change-Id: I48358ad9e2e582e8b2274cbf4655de01f8792e6c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77177
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses the CSE firmware specific data to store Intel
ISH firmware related information. Sending an ISH partition version
information command on every boot cycle would impact the overall boot
performance.
This information is used by the auto-test framework to ensure the ISH
firmware update is proper for in-field devices.
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified ISH FW version is
getting displayed across warm resets without impacting the boot time.
Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch selects SOC_INTEL_STORE_CSE_FW_VERSION config by default
for CSE LITE SKU. It helps to dump the CSE RW firmware version which
further consumed by auto-test infrastructure to ensure CSE RW firmware
update is successful.
BUG=b:285405031
TEST=Able to build and boot google/rex.
Verified CSE RW FW version (for LITE SKU) is getting displayed without
impacting the boot time.
Change-Id: Iba5903c73c0a45b01e6473714e0d5f759c061825
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77175
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch introduces a CSE firmware specific data in order
to store Intel CSE and associated firmware related information which
requires a sync between Pre-RAM and Post-RAM phase.
This information will be used further to retrieve currently running
CSE RW firmware instead of fetching the version information by sending
a HECI cmd (which consumes 7ms-15ms depending upon the CSE operational
state).
Current implementation attempts to simply the CSE RW FW version store
and retrieval operations as below
* CSE sync in romstage (aka Pre-RAM) - Relying on .bss segment to store
the CSE info data in absence of real physical memory and sync back into
the CBMEM once available (after FSP-M exits).
* CSE sync in ramstage (aka Post-RAM) - Directly stored the CSE RW
version into the CBMEM (as CBMEM is online).
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified CSE RW FW version
(for LITE SKU) is getting displayed without impacting the boot time.
w/o this patch:
10:start of ramstage 722,257 (43)
17:starting LZ4 decompress (ignore for x86) 723,777 (1,520)
w/ this patch:
10:start of ramstage 722,257 (43)
17:starting LZ4 decompress (ignore for x86) 723,777 (1,520)
Change-Id: Ia873af512851a682cf1fac0e128d842562a316ab
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77174
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This UPD does exist for Alder Lake, so set it there also.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If2f405804ab675aaf6dbf8b12d149566055b9eef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77125
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds the ability to show a pre-boot splash screen on
Meteor Lake systems using FSP-S.
The patch calls into `fsp_convert_bmp_to_gop_blt()` when the
`BMP_LOGO` config is enabled. This function converts a BMP
file to a BLT buffer, which is then used by FSP-S to render the splash
screen.
Additionally, increase the heap size (malloc'able size) upto 512KB
(when BMP_LOGO config is enabled) to accommodate high
resolution logo file.
BUG=b:284799726
TEST=Able to see splash screen while booting google/marasov
with BMP_LOGO config enable.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9f4d1bc0aa991e784624ca19ba96a259ab8ddfa6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch selects LZ4 decompression for logo CBFS file. Able to save
2ms of the boot time when HAVE_FSP_LOGO_SUPPORT config is enabled.
However, the compressed BMP logo size is increased by ~2KB.
Raw BMP Image size is ~97KB.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/rex
with 32MB (W25Q256JWEIM) SPI-Flash.
w/o this patch:
sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A
FMAP REGION: FW_MAIN_A
Name Offset Type Size Comp
...
...
logo.bmp 0x167480 raw 6172 LZMA (97078 decompressed)
...
15:starting LZMA decompress (ignore for x86) 849,090 (1,022)
16:finished LZMA decompress (ignore for x86) 851,207 (2,116)
w/ this patch:
sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A
FMAP REGION: FW_MAIN_A
Name Offset Type Size Comp
...
...
logo.bmp 0x167480 raw 8568 LZ4 (97078 decompressed)
...
17:starting LZ4 decompress (ignore for x86) 849,419 (1,279)
18:finished LZ4 decompress (ignore for x86) 849,559 (140)
Change-Id: I856c39146a5ec0faf44c1cd37fa7c0d7296bf673
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Intel has rebranded ESE as ISSE (Intel Silicon Security Engine),so all
references to ESE is updated to ISSE in the current coreboot code.
BUG=None
TEST=Build all the variants based on Intel Meteor Lake SoC
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I1f8785704706d56a35e94a0f3386bc551cd1f263
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77241
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Change-Id: If26184058536590b70bbb03209913118307ff6c5
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76830
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic559b78e6444acec36d437fe3c139b692a3f4d0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77126
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of open coding this, use the mmio_range helper function to tell
the resource allocator about the northbridge's IOAPIC's MMIO. This
change sets the IORESOURCE_RESERVE and IORESOURCE_STORED bits in the
resource flags that weren't set before, but mmio_range is already used
elsewhere for similar purposes.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id66a73cdb22fd551e4359914ba5513313dcc3193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Instead of open coding the same functionality, use fixed_io_range_flags
to tell the resource allocator about the FCH subtractively decoding the
first 0x1000 bytes of I/O space. Also update the comment to match the
code.
TEST=On Mandolin the flags of this resource stay the same (0xc0040100).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia30a87a4e37c98248568476b74af2730a3c0e88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77170
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use get_iohc_fabric_id() to translate the coreboot domain's number into
the destination data fabric ID of the PCI root. This allows using the
coreboot domain 0 as primary domain of the SoC in all cases, so it's
still possible to use config_of_soc(). This allows dropping the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN_MULTI_PCI_ROOT Kconfig option
and do the check if the destination fabric ID in the PCI bus number,
MMIO, and IO decode registers is the correct one for the domain without
the need to use a non-zero number for the primary PCI root domain.
TEST=Mandolin still boots and the PCI bus, IO and MMIO resources still
get reported correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I880ee0bf5c185cfe4af7de0d39581eb951ee603a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77169
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement get_iohc_fabric_id for each SoC that translates the coreboot
domain number to the fabric ID of the corresponding PCI root. This
allows the primary domain to have the number 0 even though the
destination data fabric ID will be non-zero. Keeping the primary domain
number 0 allows to use config_of_soc() which can be resolved at link
time and not need to dynamically find the SoC device to get the config.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6538a777619eed974b449fc70d3fe3084ba447dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change-Id: I107e2952bcca864a1cacf240cca301011df44719
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Iab1ac1609f117a1a80bc025bcbe4659189bdb676
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I88668d8c69da68cc28bae287f573f650f28da32e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In the case of SoCs hat have more than one PCI root, we need to check to
which PCI root the PCI bus number, IO and MMIO regions configured in the
data fabric registers get routed to and only tell the resource allocator
about the resources that get routed to the current PCI root domain. For
this the numbers of the domains need to match the PCI root's destination
data fabric ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib6a6412f733d321044678d2b064c33418a53861c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Intel Platform Service Record (PSR) provides on-platform persistent and
tamper resistant ledgers and counters.
Key events captured within the Intel PSR Event Ledger, e.g., Chassis
Intrusion Detection, can be observed over the life cycle of the platform
to help assess confidence.
Counters for platform S0 operational use and power state transitions can
be assessed to aid in the determination of general wear or correlations
of other platform events when determining platform decommission plans
(repurpose, resell, recycle).
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost.
CSE Lite SKU firmware supports a command to backup PSR data before
initiating a firmware downgrade. Add a config to support this PSR data
backup flow.
BRANCH=None
BUG=b:273207144
Change-Id: Iad1ce2906177081c103ef4d4bcef78fa2c95026f
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Move specific selections to {cpx,skx,spr} and remove
dummy SOC_SPECIFIC_OPTIONS
Change-Id: I71e41deb0478bf4d04395c88fc7b68df1ea83ac0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The data fabric also controls which PCI bus numbers get decoded to the
PCI root. In order for the resource allocator to know how the hardware
is configured, read the corresponding data fabric registers to get the
information that then gets passed to the allocator.
Picasso, Cezanne, Mendocino and Rembrandt only support one PCI segment
with 256 buses while the Phoenix and Glinda data fabric hardware has
support for more PCI segments. Due to this change, the register layout
is different and incompatible between those two, so introduce the
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT Kconfig option for a
SoC to specify which implementation is needed. At the moment, coreboot
doesn't have support for multiple PCI segments and the code doesn't
support PCI segments other than segment 0.
On Picasso the PCI bus number limit read back from the data fabric
register is 255 even though CONFIG_ECAM_MMCONF_BUS_NUMBER is set to 64,
so also make sure that the bus and limit returned by
data_fabric_get_pci_bus_numbers is within the expected limits.
TEST=PCI bus allocation still works on Mandolin (Picasso) and Birman
(Phoenix). Picasso has 64 PCI buses. coreboot puts this info into the
resource producer in _SB\PCI0\_CRS which the Linux kernel reads:
* coreboot: PCI0 _CRS: adding busses [0-3f]
* Linux: pci_bus 0000:00: root bus resource [bus 00-3f]
This matches the information in the ACPI MCFG table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide5fa9b3e95cfd59232048910cc8feacb6dbdb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77080
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SOC_AMD_REMBRANDT_BASE comment at the end of Glinda's Kconfig is
probably a leftover from the Mendocino/Rembrandt SoC this file was
copied from. Change it to SOC_AMD_GLINDA to match the corresponding
'if SOC_AMD_GLINDA' in the file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85132e4840c1bc713cfc2f3493f800d66edd10ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Neither Windows nor mainline Linux make use of IOSF on the Braswell
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/edgar
Change-Id: Ic51624ffd816d48c007c13d510601cf8cbf1edc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Neither Windows nor mainline Linux make use of IOSF on the Baytrail
platform, so adjust the ACPI status return value based on
CONFIG(CHROMEOS) to prevent an unknown device being listed in Windows
device manager.
TEST=build/boot Win11, Linux 6.2 on google/swanky
Change-Id: I249028c57cc704955cf5a11e2088780ef58e16cf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77141
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I83574032ef506a411571e8363f476f322ac13e5e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76686
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the maximum subordinate bus number of the domain to the last PCI bus
number that is decoded to this PCI root. This makes sure that the
resource allocator knows the maximum number of PCI buses on this PCI
root to not assign bus numbers to buses below this PCI root that aren't
routed to that PCI root.
Now that we have this info in the link list structure or the domain
device, we can pass the max_subordinate field to the
acpigen_resource_producer_bus_number call and can leave the subordinate
number after pci_domain_scan_bus is done unchanged instead of setting it
to the limit.
TEST=On Mandolin both the bus resource producer in _SB\PCI0\_CRS and the
PCI bus number allocation remain unchanged.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2ee75b2a7054a306b0c7d98c5357391c029187bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77112
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icafa36ae2e07068c276600067bba1d0377f0824b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74258
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the ability to show a pre-boot splash screen on
Meteor Lake systems using FSP-S.
The patch calls into `fsp_convert_bmp_to_gop_blt()` when the
`BMP_LOGO` config is enabled. This function converts a BMP
file to a BLT buffer, which is then used by FSP-S to render the splash
screen.
Additionally, increase the heap size (malloc'able size) upto 512KB
(when BMP_LOGO config is enabled) to accommodate high
resolution logo file.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Intel requires that all enabled PCIe PCH ports have a CLK_REQ signal
connected. The CLK_REQ is used to wake the silicon when link entered
L1 link-state. L1 link-state is also entered on PCI-PM D3, even with
ASPM L1 disabled. When no CLK_REQ signal is used, for example when
it's using a free running clock the silicon will never wake from L1
link state. This will trigger a MCE.
Starting with FSP MR4 the UPD 'PchPcieClockGating' allows to work
around this issue by disabling ClockGating. Disabling ClockGating
should be avoided as the silicon draws more power when it is idle.
TEST: Verified on two boards, one with missing CLK_REQ on a PCH
root port, that the code does the right decision to disable
UPD PchPcieClockGating and PchPciePowerGating when necessary.
Change-Id: I673bbdbadc9afbed6a7bd5ce9f35dc70716d875b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rembrandt has different data fabric component IDs compared to Mendocino.
PPR #56558 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c840a3e071a289d9e02143ee790c26faeda029d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
With reference to the Picasso PPR 55570 Rev 3.18, LegacyIoEn bit is 0 on
reset and setting it will enable the decoding of the following legacy IO
ports:
0x20, 0x21, 0xA0, 0xA1 (PIC);
0x40, 0x41, 0x42, 0x43, 0x61 (8254 timer);
0x70, 0x71, 0x72, 0x73 (RTC);
0x92.
Verstage does not use those legacy IO ports. Also newer SoCs like
Phoenix do not support Legacy I/O registers to access Power Management
registers and accessing them from PSP verstage causes a hang. Hence
enable legacy IO only on platforms that support it.
BUG=b::284984667
TEST=Build Myst BIOS image with PSP Verstage. Boot to OS successfully
with PSP verstage.
Change-Id: I5e74b4cd1fa7e942770976e5e2197ded47503660
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76692
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add configs for USB 3.1 Gen2 electrical validation (EV) settings
so that people can set the EV settings per board in device tree.
BUG=b:285811345
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to taranza and checked the log.
All usb configs were set correctly.
Change-Id: Iecd12d3db76b63ad99887dee5991d94d47f138fd
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76246
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I8fa26e7a398eee855c31a76f0f89b4111368c2a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ie360ca3640a4774e3baec36468a69f76fcd1217b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie54fd6c5a82f368018d0b5fb811a6c9220c2c70b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77079
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PPRs #57019 Rev 3.05 and #57396 Rev 3.06 were used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0fe478a710ecc1f2c8b36347aaf2d1634ebba9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77078
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
