| Age | Commit message (Collapse) | Author |
|---|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
tegra124: Add a test function which spams exclamation points on the UART.
This function spews characters on the console and, until we have a working
console, is an easy way to see whether the system boots to a particular point.
For some reason waiting for transmitter to be empty hangs, but transmitting
characters still works.
Old-Change-Id: I1622c8a58849f4b8bdcaa67500b81042d7346df4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171030
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e0059181958cfe8afec2f3a7ea732e81f5d55e5d)
tegra124: Re-enable waiting for the transmitter to empty in the test function.
The compiler was emitting code compatible with armv7-a, but the bootblock was
running on a core which uses armv4t. By coincidence, it was emitting an
instruction which is unavailable on armv4t when checking the value of the
UART's LSR register. Now that the bootblock is compiled with more appropriate
flags, this code can be re-introduced.
Old-Change-Id: I7ecada4138b0889b963d1a8b19a4bab8e0bb1add
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170997
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a0adceb5029c8ee633d17c82dbb11e48d30349d)
tegra124: Seperate out the non-UART specific hardcoded init in the bootblock.
The hardcoded init in the test function in the bootblock is actually useful
generally because it doesn't belong in the UART driver itself but is necessary
for the UART to work. Until we have real implementations for the pinmux, etc.,
we can use that code to get the UART and console going.
Old-Change-Id: I2efe0b571d8b022eb2a2e5569620558540b28373
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171334
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ae7d4d890be1936cc86dc15adeb33f3b46a51ae5)
tegra124: Implement and enable serial console support for tegra124.
The driver is very similar to the 8250 driver, except it isn't in two parts,
and it also spaces its registers 4 bytes apart instead of having them directly
adjacent to each other.
Also, eliminate the UART test function in the bootblock. It's no longer needed
since the actual console output serves the same purpose.
Right now the clock divisor is fixed for now, and we'll want to actually
figure out what value to use at some point.
Old-Change-Id: Idd659222901eb76b0ed8cbb986deb5124096f2f6
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171337
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 86f5e2875b18901b349283cfbcd4f8cc88b7a019)
Squashed 4 commits related to uart support for tegra124. Modified the
new uart.c to look like the uart.c for exynos5420.
Change-Id: I490cba014a43d58c30c48ca9ddcae2b00095b7a6
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6764
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The exynos directories had been moved from src/cpu to src/soc, but the name
of the chip_operations structure wasn't updated properly. That meant that the
SOCs never installed their memory resources and the ram stage would fail to
load the payload.
Change-Id: Ib60489b6d3434e3ebd13827a804452f762747f1b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172400
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9100d475ebcc4dae23184583a6cc0162577e70d1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6781
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This minor refactoring patch changes the signature of all limited cache
invalidation functions in coreboot and libpayload from unsigned long to
void * for the address argument, since that's really what you have in
95% of the cases and I think it's ugly to have casting boilerplate all
over the place.
Change-Id: Ic9d3b2ea70b6aa8aea6647adae43ee2183b4e065
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167338
(cherry picked from commit d550bec944736dfa29fcf109e30f17a94af03576)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6623
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I932e4566ec6313a7f2dbd58784bde71bca12abd7
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6671
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This implementation is the same as the general one except that it removes all
the things that don't work on an ARMv4.
Change-Id: I1108a79cc656b26f7d48df20aef3016cf5ae3182
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171019
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d1436288d3b025af27a8d28ba94b589940ead504)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6713
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The ARM Makefile was copied from x86 and then modified, and as a result it
was carrying a lot of baggage. On top of that, the extra complication made it
inflexible, and we need a lot of flexiblity in order to support the fact that
the Tegra124 starts on an ARMv4 coprocessor instead of one of the ARMv7 main
CPUs.
Change-Id: Ia6ddc27619bdb51e152ad0c628ad6f3037c103ce
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171017
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 512d942788336c8d52470135b43ee4e6a1c95f6c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6709
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This uses the packet mode of the controller since that allows transfering more
data at a time.
Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172402
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6703
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins on tegra are controlled by three different units, the pinmux, the
pin group controls, and the GPIO banks. Each of these units controls some
aspect of the pins, and they layer together and interact in interesting ways.
By default, the GPIOs are configured to pass through the special purpose IO
that the pinmux is configured to and so can be ignored unless a GPIO is needed.
The pinmux controls which special purpose signal passes through, along with
pull ups, downs, and whether the output is tristated. The pingroup controls
change the parameters of a group of pins which all have to do with a related
function unit.
The enum which holds constants related to the pinmux is relatively involved
and may not be entirely complete or correct due to slightly inconsistent,
incomplete, or missing documentation related to the pinmux. Considerable
effort has been made to make it as accurate as possible. It includes a
constant which is the index into the pinmux control registers for that pin,
what each of the functions supported by that pin are, and which GPIO it
corresponds to. The GPIO constant is named after the GPIO and is the pinmux
register index for the pin for that GPIO. That way, when you need to turn on
a GPIO, you can use that constant along with the pinmux manipulating functions
to enable its tristate and pull up/down mode in addition to setting up the
GPIO controls.
Also, while in general I prefer not to use macros or the preprocessor when
writing C code, in this case the set of constants in the enums was too large
and cumbersome to manage without them. Since they're being used to construct
a table in a straightforward way, hopefully their negative aspects will be
minimized.
In addition to the low level functions in each driver, the GPIO code also
includes some high level functions to set up input or output GPIOs since that
will probably be a very common thing to want to do.
Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171806
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a)
tegra124: Add base address for the pinmux and pingroup registers.
There weren't any constants for the pinmux or pingroup registers in the
address map header.
Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62)
Squashed two related commits.
Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6702
Tested-by: build bot (Jenkins)
|
|
If these aren't set, the rom and ram stages will attempt to load at address
zero which doesn't work.
Change-Id: I0b9b37d6363e6b208248d8a1af6ebee4db602486
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/173540
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 6ac5cea39d423bfcf5bbd53c2cc6228ab89f08b2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6704
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
A problem with including the tegra124 directory directly in the include path
is that it makes all headers in that directory first level headers available
everywhere including places that have nothing to do with the SOC, even headers
which were only intended for local use by tegra124 code. This change modifies
things a bit to be more like the way the arch headers are chosen. In the
tegra124 directory, there's an include directory which has an soc subdirectory
in it. That include directory is added to the include path, making it possible
to have headers private to the tegra124. When files specific to whatever tegra
is being built for are needed, you can include <soc/foo.h> and get the version
specific to that particular soc.
Also, the soc.h header file was overhauled to use enums instead of defines, to
consistently name things as far as their prefix (the less cryptic TEGRA instead
of NV_PA) and suffixes like "BASE", and to get rid of values which were
specific to U-Boot which we don't need. Since the only thing in the file were
address constants, I also renamed the file addressmap.h. It would be included
as:
<soc/addressmap.h>
which I think is easy to remember, does what you'd think it does from the
name, and won't conflict with other header files just minding their own
business in some other directory.
Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172080
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6659
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The initial commit for tegra124 (396b072) was not updated for the new ARCH settings.
Change-Id: I147bdf289e91031bd0c0a61e6da43e9c1a438f84
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6658
Tested-by: build bot (Jenkins)
|
|
Stop polluting first screen of all boards.
Change-Id: I1ab88075722f7f0d63550010e7c645281603c9c3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change shows the source structure for nvidia Tegra and Tegra124
SOC. The problem we are trying to solve is that there is a large
amount of common code in the form of .c and .h files across many
different Tegra SOCs. The solution is to provide common code in a
single directory, but not to compile in the common code directory;
rather, we compile in a directory for a given SOC. Different SOCs
will sometimes need different bits of code from the common directory.
Tegra common code lives in tegra/, but there is no makefile there: if
a Tegra common file is needed in a SOC, it is referenced via a
Makefile in a specific Tegra SOC.
Another issue is includes. Include files in the common directory might be
accessed by a piece of code in an SOC directory. More problematically,
code in the common directory might require a file in an SOC directory.
We don't want to put the SOC name in an #include path, e.g.
in a C file in tegra/ is very undesirable, since we might be compiling
for a tegra114.
On some systems this is solved by a pre-pass which creates a set of
symbolic links; on others with nested #ifdef in the common code
which include different .h files depending on CPP variables.
In previous years, both LinuxBIOS and coreboot have tried these
solutions and found them inconvenient and error-prone.
We choose to solve it by requiring explicit naming of part of the path
of files that are in the common directory. This requirement, coupled
with two -I directives in the Makefile.inc, allows common and SOC
C code to incorporate both common and SOC .h files.
.c and .h files -- SOC or common -- name include
files in the common directory with the prefix tegra/, e.g.
SOC files will be included from the SOC directory if they have no prefix:
The full patch of clock.h will depend on what SOC is being compiled, which
is desirable.
In this way, a common file can pick up a specific SOC file without
creating symlinks or other such tricky magic.
We show this usage with one file, soc/nvidia/tega124/clock.c. This compiles.
The last question is where to put the prototype for the function
defined in this file -- soc.h?
Change-Id: Iecb635cec70f24a5b3e18caeda09d04a00d29409
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/171569
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 53e3bed868953f3da588ec90661d316a6482e27e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6621
Tested-by: build bot (Jenkins)
|
|
It turns out there's a register in tegra which automatically counts at 1us
increments. It's primarily intended for hardware to use (I think to drive
other timers) but we can read it ourselves since a 1us timer is exactly what
we need to support the monotonic timer API.
Change-Id: I68e947944acec7b460e61f42dbb325643a9739e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172044
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 161a39c53404ea0125221bbd54e54996967d6855)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6620
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Otherwise the stack ends up down at 0 and has 0 bytes.
Change-Id: I0e3c80a0c5b0180d95819ab44829c2a0b527a54d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171015
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3e69a477474697bcbc40762ec166e8a515d8b0c2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6619
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These rules slip into the normal bootblock preperation process and use the
cbootimage utility to wrap it in a BCT.
Change-Id: I8cf2a3fb6e9f1d792d536c533d4813acfb550cea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170924
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cf4a9b0712c21b885bb59310671fb87e38abb665)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6618
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
irq_helper.h intentionally gets included into irqroute.asl twice - once
for pic mode and once for apic mode. Since people are used to seeing
guard statements on the .h files, add the guards to irqroute.h and add
a comment to irq_helper.h explaining why they aren't there. Add a
time.
Change-Id: I882cbbff0f73bdb170bd0f1053767893722dc60a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6572
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Most things still needs to be filled in, but this will allow us to build
boards which use this SOC.
Change-Id: Ic790685a78193ccb223f4d9355bd3db57812af39
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170836
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 462456fd00164c10c80eff72240226a04445fe60)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6431
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The GPIO_NC setting sets up the gpio as a no-connect - sets it as an
input, and pulls it high. It makes an assumption that the GPIO
function is muxing function 0. There are a few GPIOs that are on
function 1 instead:
* GPIO_S0_SC[092-93]
* GPIO_S5[11-21]
For these GPIOs, use the GPIO_NC1 setting instead of GPIO_NC.
Change-Id: Iac6790b40e87ad4ac9a3b265a8e10662186c1201
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6428
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.
Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I6db4eada5be5f9a4340d9edb942924e2fd18b5ca
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6284
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: If70f5ad26d639d7366772f4468a25bca83ac0857
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6295
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1829c77f41cc809b590d00ef5522f368bd5fd814
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6208
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The override value in the mainboard that was removed was correct.
Change-Id: Ie820df0d6b7a713488173240f0c0ca4a9e108f71
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6095
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
- remove the Kconfig text when setting the default for the FSP location.
The text was showing up twice in the config menu.
- Remove an extra 'the' in the help text.
Change-Id: I3777833bf32e19bbe5a8493578a9346d6ab062a4
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Icab0aeb2d5bf19b4029ca29b8a1e7564ef59a538
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6071
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The default FSP location needs to be in the chipset, not the mainboard.
This was removed from the Bayley Bay mainboard in patch 41ea7230f7
reviewed at http://review.coreboot.org/#/c/5982/
Change-Id: Ia26ed34e1401cbd2303166628e7a4e357d79c874
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5985
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
- Add the Bay Trail B0/B1 microcode. These versions of the SOC were
released as a "Super SKU" which had features of all the different
SKUS (M/D/T/I), and identified as a Bay Trail T as noted by the
number 2 in the third character from the left in the microcode name.
- Update the size of the microcode blob. We should be pushing a patch
to eliminate the need for this shortly.
Change-Id: I57ba51eabe9ea0609ab809f18b95e3bc9d5cb191
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5986
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Intel requested that we remove the version number from the default
vbios path.
Change-Id: I2590fed0db157e3e430212336fc55eb099d28a72
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5984
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
While pushing the fsp_baytrail code, it was requested that we change
CONFIG_ENABLE_FAST_BOOT to CONFIG_ENABLE_FSP_FAST_BOOT.
These were missed in the change.
Change-Id: If8af3f90b0f5cc9154ff1d3a387f442430f42dee
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5972
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
realpath and readlink can be used to do the same thing - in this case
we're turning path1/path2/../path3/path4 into path1/path3/path4 so
that the makefile's wildcard routine can evaluate it.
Debian derivatives don't seem to include realpath. (and even when it's
installed, it's not the gnu coreutils version.)
Change-Id: I0a80a1d9b563810bdf96aea9d5de79ce1cea457a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5793
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
While similar to the Bay Trail-M/D code based on the MRC, there are
many differences as well:
- Obviously, uses the FSP instead of the MRC binaries.
- FSP does additional hardware setup, so coreboot doesn't need to.
- Different microcode & microcode loading method
- Uses the cache_as_ram.inc from the FSP Driver
- Various other changes in support of the FSP
Additional changes that don't have to to with the FSP vs MRC:
- Updated IRQ Routing
- Different FADT implementation.
This was validated with FSP:
BAYTRAIL_FSP_GOLD_002_10-JANUARY-2014.fd
SHA256: d29eefbb33454bd5314bfaa38fb055d592a757de7b348ed7096cd8c2d65908a5
MD5: 9360cd915f0d3e4116bbc782233d7b91
Change-Id: Iadadf8cd6cf444ba840e0f76d3aed7825cd7aee4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5791
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are a couple of places where CPPFLAGS are
pasted into CFLAGS, eliminate them.
Change-Id: Ic7f568cf87a7d9c5c52e2942032a867161036bd7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5765
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename INCLUDES to CPPFLAGS since the latter is more
commonly used for preprocessor options.
Change-Id: I522bb01c44856d0eccf221fa43d2d644bdf01d69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5764
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Apply the SOC thermal settings from DPTF reference code for
SdpProfile=4 and adjust graphics PUNIT setting to match.
BUG=chrome-os-partner:17279
BRANCH=baytrail
TEST=boot on rambi and check for valid GPU power values from DPTF
Change-Id: I59fc4b75b52084ebcc4c0556563afca0585ea6b8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182786
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5052
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enable the config options to have the device enumeration layer configure
common clock and ASPM for endpoints.
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on rambi, check PCIe for ASPM and common clock:
lspci -vv -s 0:1c.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
lspci -vv -s 1:00.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
Change-Id: I2477e3cada0732dc71db0d6692ff5b6159ed269f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Though the limited documentation indicates the default is
0 for the gfx_turbo_disable bit, in practice that isn't
true. Knock down the gfs_turbo_disable bit to enable
graphics turbo mode.
BUG=chrome-os-partner:25044
BRANCH=baytrail
TEST=Built and booted. Added debug code to output SB_BIOS_CONFIG.
Noted that bit 7 was set to 0.
Change-Id: I11210c6a0b29765cb709a54d6ebd94211538807b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182640
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5050
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On baytrail, it appears that the turbo disable setting is
actually building-block scoped. One can see this on quad
core parts where if enable_turbo() is called only on the
BSP then only cpus 0 and 1 have turbo enabled. Fix this
by calling enable_turbo() on all non-bsp cpus.
BUG=chrome-os-partner:25014
BRANCH=baytrail
TEST=Built and booted rambi. All cpus have bit 38 set to 0
in msr 0x1a0.
Change-Id: Id493e070c4a70bb236cdbd540d2321731a99aec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182406
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5048
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This will allow USB devices to wake the system (if 5V is not turned off)
and the controller to enter D3 at runtime. (if autosuspend is enabled)
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on baytrail
1) with modified EC to leave 5V on in S3 ensure that waking from suspend
with USB keyboard works.
2) with laptop-mode-tools usb autosuepend config updated see that device
enters D3 at runtime when no external devices attached.
Change-Id: Ia396d42494e30105f06eb3bd65b4ba8b1372cf35
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182536
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5046
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The current byte value was being converted to an int
when checking against literal 0xff. As the type of
the current pointer was char (signed) it was sign
extending the value leading to 0xffffffff != 0xff.
Fix this by using an unsigned type and using a
constant type for expected erase value.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmwareupdate. Noted that MRC
cache doesn't think the erased region isn't erased.
Change-Id: If95425fe26da050acb25f52bea060e288ad3633c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182154
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On a firmware update the MRC cache is destroyed. On the
subsequent boot the MRC region was attempted to be erased
even if it was already erased. This led to spi part taking
longer than it should have for an unnecessary erase
operation. Therefore, check that the region is erased
before issuing the erease command.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmeareupdate. Noted no
error messages in this path.
Change-Id: I6fadeb6bc5fc178abb0a7e3f0898855e481add2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5043
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Include C0 microcode drop.
BUG=None
BRANCH=rambi,squawks
TEST=Built. Booted B3 part.
Change-Id: If454658235cd5a7b8640de0b3fa12dccddb0e9f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182080
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5041
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This improves boot time in 2 ways for a firmware upgrade:
1. Normally MRC would detect the S0 state without an MRC cache
even though it's told to the S5 path. When it observes this
state a cold reset occurs. The cold reset stays in S5 for
at least 4 seconds which is time observed by the end user.
2. As the EC was running RW code before the reset after firmware
upgrade it will still be running the older RW code. Vboot will
then reboot the EC and the whole system to put the EC into RO
mode so it can handle the RW update.
The issues are mitigated by detecting the system is in S0 with
no MRC cache and the EC isn't in RO mode. Therefore we can do the
reboot without waiting the 4 secs and the EC is running RO so
the 2nd reboot is not necessary.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Booted. Updated firmware while in OS. Rebooted. Noted the
EC reboot before MRC execution.
Change-Id: I1c53d334a5e18c237a74ffbe96f263a7540cd8fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182061
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5040
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Added a method in each temp sensor to disable the aux trip points
and then a wrapper function to call this method for each enabled
temperature sensor.
The event handler function is changed to not use a switch statement
so it does not need to be serialized. This was causing issues
with nested locking between the global lock and the EC PATM mutex.
Some unused code in temp sensors that was added earlier is removed
and instead a critical threshold is specified in _CRT.
The top level DPTF device _OSC method is expanded to check for the
passive policy UUID and initialize thermal devices. This is done
for both enable and disable steps to ensure that the EC thermal
thresholds are reset in both cases.
Additionally the priority based _TRT is specified with TRTR=1.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and start
esif_uf application. Observe that temperature thresholds are set
properly when running 'appstart Dptf' and that they are disabled
after running 'appstop Dptf'
Change-Id: Ia15824ca42164dadae2011d4e364b70905e36f85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182024
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5037
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove some unused functions from CPU participant that were
confusing the userland component since the CPU does not have
an ACPI managed sensor.
- Guard the charger participant with an ifdef so it can be
left out if not supported.
- Use the EC methods for setting auxiliary trip points and for
handling the event when those trip points are crossed.
- Add _NTT _DTI _SCP methods for thermal sensors. I'm not
clear if these are required or not but they seem to be expected
by the other DPTF framework components.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and load ESIF framework
Change-Id: I3c9d92d5c52e5a7ec890a377e65ebf118cdd7087
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5028
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SMI on TCO timer timeout policy was copied from other
chipsets. However, it's not very advantageous to have
the TCO timer timeout trigger an SMI unless the firmware
was the one responsible for setting up the timer.
BUG=chromium:321832
BRANCH=rambi,squawks
TEST=Manually enabled TCO timer. TCO fires and logged in
eventlog.
Change-Id: I420b14d6aa778335a925784a64160fa885cba20f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181985
Reviewed-on: http://review.coreboot.org/5035
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PMC in baytrail maintains an additional set
wake status in memory-mapped registers. If these
bits aren't cleared the device won't be able to
go to S5 or S3 without being immediately woken up.
Therefore clear these registers.
BUG=chrome-os-partner:24913
BRANCH=rambi,squawks
TEST=Ensured PRSTS bit 4 is cleared after a reboot and S3 and S5 work
correctly.
Change-Id: I356e00ece851961135b4760cebcdd34e8b9da027
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181984
Reviewed-on: http://review.coreboot.org/5034
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When CONFIG_ELOG is selected the reset, power, and wake
events are logged in the eventlog.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Various resets and wake sources. Interrogated eventlog
to ensure results are expected.
Change-Id: Ia68548562917be6c2a0d8d405a5b519102b8c563
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181983
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5033
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The memory reference code doesn't maintain some of
the registers which contain valuable information in order
to log correct reset and wake events in the eventlog. Therefore
snapshot the registers which matter in this area so that
they can be consumed by ramstage.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Did various resets/wakes with logging patch which
consumes this structure. Eventlog can pick up reset
events and power failures.
Change-Id: Id8d2d782dd4e1133113f5308c4ccfe79bc6d3e03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181982
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The C0 part uses a new cpuid.
BUG=None
BRANCH=squawks,rambi
TEST=None.
Change-Id: Iddf1bc4d6f7bbec3ca92bff8edf613e00a4b4286
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181980
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5031
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The BISOC.EXIT_SELF_REFRESH_LATENCY field should
not be updated from the default.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180730
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5025
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When employing vboot firmware verification the reference
code loading should load from the verified firmware
section. Add this ability.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted rambi. Noted firmware being loaded
from rw verified area. Also noted S3 resume loading
from cached area.
Change-Id: I114de844f218b7573cf90107e174bf0962fdaa50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180026
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5023
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The kernel iosf driver uses HID INT33BD to probe and
be provided the 12 bytes in PCI for access.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, load iosf_mbi driver and
verify that it gets address 0xe00000d0
Change-Id: I865eafe664f00f21d1ebb967c291083830d895b9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180098
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5021
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Make sure reg_script is executed before the device is put into
ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi from eMMC in ACPI mode
Change-Id: I4090babbfc7fb0f3be4da869386e998d87a513ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5017
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Since this file will get added to payloads it is useful if it
exports what offset in NVS it lives.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi with emmc in ACPI mode
Change-Id: I52860980c91dfe2525628e142b34ca192e69b258
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179848
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5014
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
In order to use the same reference code on S3 resume
that was booted the program needs to be cached. Piggy
back on the ramstage cache to save the loaded reference
code program.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed. Noted locations of reference
code caching and load addresses in console.
Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179777
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
To prepare for caching reference code for S3 resume the
ramstage cache needs to be accesible in ramstage as well.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I4c825c965b98cd71ea0eb9c93fe168a358da4c97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179776
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5012
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Certain code paths want to know if S3 resume is
happening. However, the current baytrail code doesn't
note S3 resume early enough. Therefore, mark S3
resume just after pattr setup.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179774
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5010
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The inclusion of reg_script_run_on_dev() allows
for removing some of the chained reg_scripts just
to set up the device context. Use the new reg_script
function in those cases.
BUG=None
BRANCH=None
TEST=Built and booted. Didn't see any bizarre dmesg or coreboot
console output.
Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438
Signed-off-by: Aaron Durbin <adurbin@chromium.og>
Reviewed-on: https://chromium-review.googlesource.com/179541
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
According to the reference code all these registers
need to be set to their best known values.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake. No idea about
observable impact yet.
Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179749
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5008
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There's a slew of ports required to initialize baytrail's
perf and power values. Therefore, add the necessary
functionality in the iosf module as well as the reg_script
library.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted.
Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179748
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5007
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The iosf access functions already use some common code,
however there is a duplication for setting up the proper
control register for port and opcode. Introduce macros
to remove this verbosity.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake.
Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179747
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5006
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This adds the option to put LPSS and SCC devices into ACPI mode
by saving their BAR0 and BAR1 base addresses in a new device
NVS structure that is placed at offset 0x1000 within the global
NVS table.
The Chrome NVS strcture is padded out to 0xf00 bytes so there
is a clean offset to work with as it will need to be used by
depthcharge to know what addresses devices live at.
A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and
the EMMC 4.5 IRQ is changed to 44.
New ACPI code is provided to instantiate the LPSS and SCC devices
with the magic HID values from Intel so the kernel drivers can
locate and use them.
The default is still for devices to be in PCI mode so this does
not have any real effect without it being enabled in the mainboard
devicetree.
Note: this needs the updated IASL compiler which is in the CQ now
because it uses the FixedDMA() ACPI operator.
BUG=chrome-os-partner:23505,chrome-os-partner:24380
CQ-DEPEND=CL:179459,CL:179364
BRANCH=none
TEST=manual tests on rambi device:
1) build and boot with devices still in PCI mode and ensure that
nothing is changed
2) enable lpss_acpi_mode and see I2C devices detected by the kernel
in ACPI mode. Note that by itself this breaks trackpad probing so
that will need to be implemented before it is enabled.
3) enable scc_acpi_mode and see EMMC and SDCard devices detected by
the kernel in ACPI mode. Note that this breaks depthcharge use of
the EMMC because it is not longer discoverable as a PCI device.
Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179481
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5004
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is not complete yet but it compiles and doesn't cause
any issues by itself. It is tied into the EC pretty closely
so that is part of the same commit.
Once we have more of the EC support done it will need some
more work to make use of those new interfaces properly.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, dump DSDT and look over \_SB.DPTF
Change-Id: I4b27e38baae18627a275488d77944208950b98bd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179459
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5002
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These need to be set before the kernel will work without
running the VBIOS option rom.
Also necessary is setting the PP_CONTROL register with
the EDP_FORCE_VDD bit.
BUG=chrome-os-partner:24367
BRANCH=none
TEST=boot on rambi in normal mode and see the panel come up
Change-Id: I495f818d581d08b80db11785fe28b601ec956b3b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179364
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5000
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The SD card controller can have the capabilities it supports
to be overridden. Add two optional fields to the chip structure
to allow the mainboard to override the SD card controller
capabilities.
BUG=chrome-os-partner:24423
BRANCH=None
TEST=Built and booted. Noted capabilities override console output.
Change-Id: Ibfef8f765b35eeec6da969dd05f5484f8672a7b9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179414
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4997
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The VDAT data was off by 2 bytes when reading it from the
kernel. The reason is that the header did not line up
correctly with actual ACPI code.
BUG=chrome-os-partner:24440
BRANCH=None
TEST=crossystem devsw_cur now returns either 0 or 1 depending
on state.
Change-Id: Ie78599f29cd5daf7da98db5e37fa276d24339f6a
Signed-off-by: Aaron durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179372
Reviewed-on: http://review.coreboot.org/4996
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The LPE audio device needs 1MiB of memory for its firmware.
It also has a requirement that the memory needs to be on a
512MiB boundary. Just take 1MiB @ 512MiB for the LPE device.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and analyzed console logs for resources. Also interrogated
registres within the kernel.
Change-Id: I4d9ad5c7b5a2f3eb627b30528d738289278b3a7b
Reviewed-on: https://chromium-review.googlesource.com/179192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4994
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The Linux kernel driver cannot handle Baytrail legacy GPIOs, so make the
default input GPIO type MMIO.
BUG=chrome-os-partner:24408
TEST=Manual on Rambi. Run "echo 169 > /sys/class/gpio/export; cat
/sys/class/gpio/gpio169/value", verify GPIO value changes based upon mic
jack status.
BRANCH=None
Change-Id: I27870ce8b7ecae9228e06e48c8759409c824c2eb
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179169
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4992
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The enable_resources callback was accidentally populated
with NULL. Make that callback be the generic
pci_dev_enable_resources.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted.
Change-Id: I670b51bd9aff6764e9b549287a737b662572cdc7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178960
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4989
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The new IASL is complaining about the PCI memory region not
having consistent base/end/length values because they are
placeholder that are fixed up in the method before returning.
Put in some more valid placeholder values to make it happy.
BUG=chromium:311294
BRANCH=none
TEST=build and boot with IASL 20130117 on rambi
Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178864
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4988
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add device tree option to determine if the LPE
audio codec has a platform clock signal connected
to it from the SoC. If a frequency is selected the
platform clock number is used to enable the
clock.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted rambi with 25MHz option. Probed pin
to audio codec. Noted 25MHz clock.
Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178780
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4986
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
There are 3 banks of GPIOs that need to be described
with specific _UID and memory/interrupt values.
BUG=chrome-os-partner:24314
BRANCH=none
TEST=build and boot on rambi, check for probed driver:
gpiochip_find_base: found new base at 154
gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00
gpiochip_find_base: found new base at 126
gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01
gpiochip_find_base: found new base at 82
gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02
fed0c000-fed0cfff : INT33FC:00
fed0c000-fed0cfff : INT33FC:00
fed0d000-fed0dfff : INT33FC:01
fed0d000-fed0dfff : INT33FC:01
fed0e000-fed0efff : INT33FC:02
fed0e000-fed0efff : INT33FC:02
Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178601
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4985
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
With microcode 31E MWAIT 0x51 is now C6NS and 0x52 is now C6FS.
BUG=chrome-os-partner:23505
BRANCH=none
TEST=build and boot on rambi, check that C1/C2/C3 are all used now
Change-Id: I8528d808f4082c85d90e2b57747d9f2e2d982b85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178461
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4984
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
use IS_ENABLED() over #if brackets
Change-Id: I101f99971c0f7b5311ef19cc9832713ab0696935
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5692
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add config option to enable RMT in the MRC.
BUG=chrome-os-partner:21807
TEST=Manual. Build w/ "USE=rmt", verify RMT print seen on FW console.
Build w/o USE flag, verify no RMT print.
BRANCH=None.
CQ-DEPEND=CL:*148655
Change-Id: Ibd3da87317a3359e797d9b43bc437e7227a85048
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178095
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4982
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Add PCIe driver to initialize root ports.
BUG=chrome-os-partner:24111
TEST=Manual on Rambi. Verify that PCIe Wifi card is detected and able to
detect networks.
BRANCH=None.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I3c68da5f27cd162e112add488bdf5ced192b7d12
Reviewed-on: https://chromium-review.googlesource.com/177652
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4981
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
NCORE pad addresses were wildly wrong due to documentation bugs.
BUG=chrome-os-partner:24179
TEST=Manual on Rambi. Verify display isn't always on. Verify brightness
control now works in Chrome OS.
BRANCH=None.
Change-Id: I464436a58baa4957329c11231c5a866dafd97ce8
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177597
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4980
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The default mode of the SPI controller has prefetching disabled.
That obviously has a performance impact. Enable both caching
and prefetching to make booting faster. This has a significant
impact on streaming data out of SPI.
BUG=chrome-os-partner:24085
BRANCH=None
TEST=Built and booted rambi. Payload loading step went from ~285ms
to ~54ms.
Change-Id: I065cf44e1de7dcefc49aa9ea9ad0204929ab26f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177220
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4976
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
When a pad is configured for direct IRQ it needs to be in
non-legacy. Additionally, the signal is passed directly to
the APIC by setting the LEVEL and TPE bits in the pad config
register. The APIC can then be configured for level, edge,
and rising/falling.
BUG=chrome-os-partner:24037
BUG=chrome-os-partner:22863
BRANCH=None
TEST=Built and booted with this config. Trackpad is firing interrupts
more than it should, but it appears to be a trackpad firmware
and/or configuration issue.
Change-Id: I00042b2ddba67d6bf23f0e7468d0719196e6f865
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176793
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4975
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The TPM needs to have the TPM_Startup command sent to it
on all boot paths. The call init_chromeos() in romstage_common()
fulfills this requirement.
BUG=chrome-os-partner:24057
BRANCH=None
TEST=Built and booted. Was able to suspend to ram multiple times
in a row.
Change-Id: Id0339a9d82897249d20ff5f62d2dcb8b535310fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176803
Reviewed-by: Todd Broch <tbroch@chromium.org>
Tested-by: Todd Broch <tbroch@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PCIe subsystem was constantly waking up boards from
S3 and S5. Completely disable PCIe wake ups. It can be made
mainboard-configurable later if needed.
BUG=chrome-os-partner:24004
BRANCH=None
TEST=Both S3 and EC RW->RW update (trip through S5) don't
cause wakeups.
Change-Id: I922e2947c4b6e29277d913f06192601a2954f8fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176791
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4972
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Previously pads were being configured as both input and output
simultaneously due to the config bits being active low. Create new
defines that only enable either input or output, and use them in our
GPIO configs.
BUG=chrome-os-partner:22863
TEST=Manual on Rambi. Verify system boots and peripherals still
function.
BRANCH=None.
Change-Id: If386682a3d810864b7b9f5d2aecdb2e6cfceea86
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176725
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4971
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This commit does the common parts for all LPSS devices
that are enabled: enable snoop in IOSF and enable power
management. Additionally, the i2c devices are taken out of
reset.
BUG=chrome-os-partner:23790
BRANCH=None
TEST=Built and booted with modified kernel-next. I2C bus devices
show up and I see 0x10 on one of the buses.
Change-Id: I540caea6a8666f5684dc5cee683a6b085dfac6de
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176424
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4969
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The eMMC device is initialized as version 4.5 with HS200 speeds.
BUG=chrome-os-partner:23966
BRANCH=None
TEST=Built and booted rambi to login screen off of eMMC device.
Change-Id: I686c6136005fcb2587b939ddea293f4398df9868
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176536
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4967
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The SSC (storage control cluster) houses the SD, SDIO, and eMMC
interfaces. The scc cofniguration function, baytrail_init_scc(),
is ran in the pre device stage to initialize the SCC. The eMMC
is expected to be configured for version 4.5.
BUG=chrome-os-partner:23966
BRANCH=None
TEST=Built and booted with some other eMMC changes into login screen off
of eMMC device.
Change-Id: I81cc755a790b7e43ad234a8201dae480277202c8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176535
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4966
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The SCORE allows controlling the pad configuration while
the SSC handles the configuration for the storage control
cluster.
BUG=chrome-os-partner:23966
BRANCH=None
TEST=Built.
Change-Id: Ifd9f67a4e88d5bb99faec6ceeb3e263001a87c41
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176533
Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4964
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.
These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.
In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.
Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.
We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.
Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Add support for DirectIRQ / dedicated IRQs. This consists of up to 16
IRQs for both SCORE and SSUS banks.
BUG=chrome-os-partner:22863
TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ
regwrites w/ GPIO_DEBUG look correct.
Change-Id: I4b0dc6e7ae86c9f554b6e78792239234f702764c
Reviewed-on: https://chromium-review.googlesource.com/176165
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4962
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
GPIOs which trigger SMIs only set the status bits in the ALT_GPIO_SMI
regier. No bits in the SMI_STS register are set. Therefore, the
ALT_GPIO_SMI register needs to be read and cleared on every SMI.
Additionally, the mainboard_gpi_smi() handler needs to be called as
well on every SMI because of this property.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted to recovery screen. Typed 'lidclose' on EC
console. SMI occurred which caused the board to be shutdown.
Change-Id: Ic204d8b928a0cb4f51f108a649f374d9f94e4f47
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176391
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4958
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In order for gpio pins to trigger an smi/sci the GPIO_ROUT
register needs to be set accordingly. For SMI, the ALT_GPIO_SMI
register needs to be enabled for each gpio as well.
The first 8 gpios from the suspend and core well are the only gpios
that can trigger an SMI or SCI. The settings for the GPIO_ROUT
and ALT_GPIO_SMI register are not commited until the SMM settings
are enabled in the southcluster.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Manually triggered SCI by changing GPE0a_EN
and toggling PCH_WAKE_L on the EC console.
Change-Id: Id79b70084edc39fc047475e984494c224bd75d6d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176390
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4957
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The gpe0 block's size was being misreported. Correct
the gpe0 size and use make the FADT fields be more
robust instead instead of hand calculating fields that
are the based on the same size.
This change correctly enables GPE events in the kernel.
Confirmed this by using iotools read the gpe_cnt register.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Confirmed EC's GPE event is enabled (but
still not working).
Change-Id: I415710f7fec2e95cecee3bf679ee673dacc27480
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176271
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4956
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
BUG=chrome-os-partner:23505
BRANCH=none
TEST=build and boot on rambi
Change-Id: I89c25142245cd268f755210784fd9d0c60dc5661
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176305
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4955
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- C-state table based on static config
MWAIT values are from ref code for non-S0ix config
C6 substate 8 is ignored by the kernel as it violates the CPUID
but it is left in as the other substate may not work.
- P-state table generated with proper ratio and VID values
relies on having the package power msr set to magic value
as the power-on default is wrong
- T-state table uses static table
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I7c997e58cb3a71d0ec413b17f0c5467bef4bf62c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175742
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4954
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
