| Age | Commit message (Collapse) | Author |
|---|
|
Lynx Point PCH reference code version 1.9.1 programs the larger L1 exit
latency when ASPM is enabled. Document 535127 (BDW PCH-LP BS) also does
the same. Correct the condition accordingly. On Lynx Point, also remove
a now-redundant write to the LCAP register (offset 0x4c).
Change-Id: I2166bd5b5504ed97adcd2db0a802da02da4c91f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57501
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mark eMMC as non-removable to allow Windows 10/11 to install now that
edk2 can boot from it.
Change-Id: If0e14106521f99cb97d1bf421f4d82d1234c2f15
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These files were added after the switch.
Change-Id: I1986e4f921e0e56fe5255433d4b9216dc7c4dc59
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81856
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the official microcode updates from intel-microcode submodule
by default. Downstream users can still decide to use their own files.
Change-Id: I58121cc2ca7699d3d26581d7d5875ec74deeeb93
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81637
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Lynxpoint has them, so add them on Broadwell as well.
Change-Id: Iaa3e8044090262a64e58062ec4b116976978ce55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Lynx Point PCH reference code version 1.9.1 checks bit 29 to detect ASPM
on PCH-LP root port #6, not bit 28. Document 535127 (BDW PCH-LP BS) also
uses bit 29 for root port #6. Correct the bit used in the check, as well
as the surrounding comments.
Change-Id: Ie4bd7cbbfc151762f29eab1326567f987b25ab19
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57500
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For current generation SPR/EMR you need to add at least
3 different microcodes having about 2MiB of size in total.
This doesn't work with the hardcoded offset and size in Kconfig.
Since it's loaded through FIT there's no need to pass it to FSP-T.
Drop the hardcoded locations and place it somewhere in CBFS.
Test: Booted on ibm/sbp1 with microcode confirmed loaded in
bootblock on BSP. All the APs also have the correct
microcode version loaded.
TEST= Build and boot on intel/archercity CRB
'cat /proc/cpuinfo | grep microcode' result doesn't change
before and after this patch.
Change-Id: Iaa7007c2b11a860c9c664a7e753440bad7fe858e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81635
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Compress FSP-S to save some space in CBFS.
Reduces the size of debug FSP-S by about 25%.
Test: Still boots on ibm/sbp1.
TEST= Build and boot on intel/archercity CRB.
Change-Id: I6248e7cabbce45f6c2fedfab34f328309f87e868
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81634
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
WildcatPoint-LP BIOS spec lists them, and are the same for Lynxpoint.
Change-Id: Iba28c1591affafeb37097084c2fa58128974bd00
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Integer division in C truncates toward zero. When the dividend and the
divisor are positive, one can add half of the divisor to the dividend to
round the division result towards the closest integer. We already have a
macro in commonlib to do just that, so put it to good use.
Tested with BUILD_TIMELESS=1, coreboot images for the Asus P8Z77-V LX2
and the Asrock B85M Pro4 do not change.
Change-Id: I251af82da15049a3a2aa6ea712ae8c9fe859caf6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52651
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/pci.h> is supposed to provide <device/pci_{def,type}.h>
Change-Id: Ia645b8dba8c688187a25916f508593f333821f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81831
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If8be8dc26f2729f55dc6716e6d01e2b801d79e44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ic690a7543f8a1e072650917d7a1e9e3b9dc371a3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: Ib454330c5f584760c47ff0127a720cec5773b922
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: I66265727b68b6ad10722439314b466298dbfff28
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81821
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icd00f30a96c53f70babdcb8a77c4b6c2868619d8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Ie7e36cfa5a09d94bb58f12f9bd262255a630424c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81819
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I46a362270f69d0a4a28e5bb9c954f34d632815ff
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
IoT variants of the RaptorLake FSP support the `PchPciePowerGating` and
`PchPcieClockGating` UPDs, so, remove the preprocessor check that only
enabled it for AlderLake FSPs.
Change-Id: I583a4b257b72f992fdb6390d00e187d04a749177
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81803
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Avoid calling `acpi_device_scope()` and `fast_spi_acpi_hid()` if the
result won't be used. Also, reorder a condition so that compile-time
constants appear first, so as to help the compiler optimize it out.
Change-Id: I42ce55c2978ad9c593c359c5decd5842fb3a97a1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I0e216cbc4acf9571c65c345a1764e74485f89438
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81818
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MAINBOARD_USES_FSP2_0 selects PLATFORM_USES_FSP2_0 and
POSTCAR_STAGE which are used by all Xeon-SP platforms.
After the removal of MAINBOARD_USES_FSP2_0, PLATFORM_USES_FSP2_0
is implicitly selected by SoC Kconfigs in PLATFORM_USES_FSP2_X,
POSTCAR_STAGE is selected by XEON_SP_COMMON_BASE.
TEST=Build and boot on intel/archercity CRB
Change-Id: I45332d49dd21f9749fce458877777a4b783a1b11
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81783
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I40e2e5a786499abbe2fce63d6e0f1ac1e780ab51
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I26c2abfce3417ed096d945745770fcae91a1e4ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81814
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ic7f6690786661e523292f7382df71ae4ad04d593
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Change-Id: I93e6989633b9ac1b2738b812e3f8b442ecfdcbf0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I265e427254ce9f735e65b0631c43f98bc778a34f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81812
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the soc_get_ioapic_info for platforms with IIO IO-APICs to
a separate file from src/soc/intel/xeon_sp/acpi.c.
TEST=Build intel/archerticy CRB
Change-Id: I59022b7685539491604724ef3b550da1cfd53f13
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Iccdb4770890751b7f9d1b35248fe57993342fd50
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
To fix the build error below when include i2c_common.h, we should
include the necessary header for check_member.
"""
src/soc/mediatek/common/include/soc/i2c_common.h:24:42: error: expected ')' before numeric constant
24 | check_member(mt_i2c_dma_regs, dma_tx_len, 0x24);
| ^~~~~
| )
"""
TEST=abuild -t google/geralt -b ciri -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I266571686e452e2b7514afee42ff0a48f8891831
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81684
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When DEBUG_SMI is selected, common code may use these helpers to handle
addressing and initialising the SoC-specific UART. Therefore, add uart.c
to be compiled into SMM.
Change-Id: If7c6f2346d5f9ffb371d51d1de6f0b695acedf10
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81072
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This refactoring ensures bmp_load_logo() takes logo_size as an
argument, returning a valid logo_ptr only if logo_size is non-zero.
This prevents potential errors from mismatched size assumption.
BUG=b:242829490
TEST=google/rex0 builds successfully.
Change-Id: I14bc54670a67980ec93bc366b274832d1f959e50
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81618
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
unlock_pam_regions() is needed for SKX and CPX. Put the codes into
chip_gen1.c so that it could be shared among SoC generations.
After shared, unlock_pam_regions() is still called from SKX and
CPX SoC specific codes. SPR will also use chip_gen1.c, but it will
not call unlock_pam_regions().
TEST=Build and boot on intel/archercity CRB
Change-Id: Idbc7dc6dd22a1747a65543666fc714a0872e6b37
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
<types.h> is supposed to provide <stdint.h>.
Change-Id: Ia68a0dc8fba4a48401e213ebb8356e32f0a019ab
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I42bb15b8534d16401cd06ff803a8425221c5f3c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Call into FSP-T using the protected mode wrapper
and enter long mode in FSP-T support assembly code.
TEST: Booted on ibm/sbp1 in long mode.
Change-Id: Id6b9780b06b4bfbb952e32091ffbf3d0014f2090
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
intel/common/block/acpi provides default soc_get_ioapic_info for
single IOAPIC model. Use the default soc_get_ioapic_info when
XEON_SP_HAVE_IIO_IOAPIC is not set. This model fits for SPR and
later.
TEST=Build and boot on intel/archercity CRB
Change-Id: I1ecfba49cd9b4dfbb3f11d58d04d07ea1752a131
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Currently the SRAT table only exposes one proximity group as
it uses the LAPIC node_id, which is always initialized to 0.
Use CPUID leaf 0x1f or 0xb to gather the node ID and fill it
to make sure that at least one proximity group for every socket
is advertised.
For now the SNC config isn't taken into account.
Change-Id: Ia3ed1e5923aa18ca7619b32cde491fdb4da0fa0d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
unlock_pam_regions routes Programmable Attribute Map (PAM) access
to DRAM. In SPR, PAM routing to DRAM is covered by FSP. Move the
step to SoC specific codes.
TEST=intel/archercity CRB
Change-Id: I3fd1d806807449e6a4d9d4d2c8a47ce61ed53018
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
IBL (Integrated Boot Logic) provides a subset of server
PCH logics for no-PCH solution. IBL is with limited features
and registers exposed, PCIe root ports/USB/SATA/LAN support are
removed.
Change-Id: I8f3d64a2dd3b79ec5a9e4306f40b012b00387259
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81314
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Granite Rapids (6th Gen Xeon-SP) FSP introduces UDS_STACK_RES/
UDS_SOCKET_RES and retires the usages of STACK_RES/
IIO_RESOURCE_INSTANCE. Make redinitions to make Xeon-SP common
codes to work for both 6th Gen before and later.
Change-Id: I28c948525cd6d7ac4b9c3fa67e3c99ec637ed38f
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81040
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The RPL FSP currently uses HECI commands to retrieve the chipset
initialization version because the MBP HOB creation is disabled
(SkipMbpHob=1). This has resulted in an approximate 150ms increase in
boot time. Investigations are ongoing to determine the cause of the
delay when using HECI commands. As an interim solution, this patch sets
SkipMbpHob=0, enabling the use of MBP HOB or acquiring the chipset
initialization version, which is expected to reduce the boot time.
BUG=b:328430167
TEST= Able to build,boot and collect boot time data of brya.
With this patch:
963:returning from FspMultiPhaseSiInit 1,337,481 (249,046)
Without this patch:
963:returning from FspMultiPhaseSiInit 1,496,268 (408,194)
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I8a99a57b644732074e41051d99e63576f1edd229
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
GraniteRapids (6th Gen Xeon-SP) FSP contains changes in IIO stack
descriptors impacting the way of coreboot's creation of domains.
Separates the codes as preparation for 6th Gen and later platforms.
Change-Id: Iab6acaa5e5c090c8d821bd7c2d3e0e0ad7486bdc
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I79b93b0ca446411e2a1feb65d00045e3be85ee8a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Id604dc981d6ca0a8163b7477b7916210faa56a77
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If2c2138ed3dc437b924297330805caa8c357853d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81460
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I140daa5b862ffd3a5b5468d7cb9dbdd81426855e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81459
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0203e77dd23fa026cd252abbda50f1e9f6892721
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
With SMM holding page tables itself, we can consider SMM support stable
and safe enough for general use.
Also update the respective documentation.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifcf0a1a5097a2d7c064bb709ec0b09ebee13a47d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When linking in page tables more place is needed. Size the bootblock is
top aligned, this has no impact the final size for existing setups.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I23f176d63d3c303b13331a77ad5ac6c7a19073d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This does the following:
- Top align the bootblock so that the only the memory needed gets used.
This might slightly reduce the time the PSP needs to decompress the
bootblock in memory
- Use a memory directive to assert that the 16bit code is inside the top
64K segment
- Use the program counter less. While the BDF linker is happy about
running the program counter backwards, LLD is not. There is no
downside to this.
- Use a symbol rather that the program counter for sections. LLD gets
confused when (.) is used along with '<': it places the section at the
start of the memory region, rather than at the program counter. Using
a variable name works around this.
- Use a 'last_byte' section to make sure the first instruction is at
0xfff0. Both the BDF and the LLD linkers seems to work well with this
code
TEST: Both BFD and LLD are able to link the bootblock
Change-Id: I18bdf262f9c358aa01795b11efcb863686edc79c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I0ce2b61329efede1ba8a02446610e3eb635ceedc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81462
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Fix compilation errors when compiled for x86_64.
Test: Booted on ibm/sbp1 to linux payload.
Change-Id: I2c5ed0339a9c2e9b088b16dbb4c19df98e796d65
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81280
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP2.4 and previous FSP versions have different FSP-T UPD
parameter settings.
Change-Id: I48384944ac69636cca2acd8169d3dd15f90362ec
Signed-off-by: Li, Jincheng <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81313
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR support codes across generations are similar. Share the codes
to improve code reuse.
TEST=intel/archercity CRB
Change-Id: I237d561003671d70dfaaa9823a0cf16d6e1f50cf
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81219
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Return statement is not useful in void function.
Change-Id: Idb8e07f48043452b329d255fe457f00317c017ae
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81429
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds timestamp start/end entries around the eSOL
implementation to track the panel initialization time while rendering
the eSOL screen.
TEST=Able to build and boot google/omnigul.
555: started early sign-off life (eSOL) notification 643,694 (40)
556: finished early sign-off life (eSOL) notification 1,072,143 (428,449)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I51c04fc4bd2540b3f42e2f896178521d297ef246
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The memmap_early_dram struct is now only used inside the non-CAR
memmap.c, so move the struct definition there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id2bb3d3a9e01e9bae9463c582cb105b95c673a38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Only the VGA MMIO range used the VGA_MMIO_* defines, but instead of
using constants for the end of the region before that and the beginning
of the region after that, the VGA_MMIO_* defines can be used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45c3888efb942cdd15416b730e36a9fb1ddd9697
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If3424df80655a150f27c7296a5683b528873816b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since the code for reporting the memory map below cbmem_top is basically
identical for all non-CAR AMD SoCs, factor this out into a common
read_lower_soc_memmap_resources implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id64462b97d144ccdf78ebb051d82a4aa37f8ee98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81389
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the XHCI code into soc/intel/xeon_sp/ebg where it belongs.
TEST=intel/archercity CRB
Change-Id: I2206ec5426a0f922cfce0e2d968e6806d349a6b2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Since there's no code using those defines drop them.
TEST=intel/archercity CRB
Change-Id: I507b08a62ebeae14a1e63f4340b0592605a32477
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81369
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
To bring genoa_poc more in line with the other AMD SoCs, move the
reporting of the memory map up to cbmem_top from the openSIL-specific
add_opensil_memmap function to read_soc_memmap_resources. This is a
preparation for making this code common for all newer AMD SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic06282baa3bb9a65d297b5717697a12d08605d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81388
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Other files in the commits that added these files were licensed under
GPL-2.0-only, and the project as a whole is GPL-2.0-only, so use that
as the license.
Change-Id: I6c1a7ba582f61f98069ebf3857a8b5bdc8588c3e
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81421
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Older parts do not have the menvcfg csr.
Provide a Kconfig variable, default y, to enable it.
Check the variable in the payload code, when coreboot SBI
is used, and print out if it is enabled.
The SiFive FU540 and FU740 do not support this register;
set the variable to n for those parts.
Add constants for this new CSR.
Change-Id: I6ea302a5acd98f6941bf314da89dd003ab20b596
Signed-off-by: Ronald G Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81425
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Move the gpp_bridge_* device functions that are bridges to the external
PCIe ports below the corresponding mpio chip. This avoids the need for
dummy devices and does things in a slightly more coreboot-native way.
TEST=PCIe lane config reported by openSIL is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I7e39bf68d30d7d00b16f943953e8207d6fe9ef41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81340
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Different SoC generations might have different FSP header files. It is
recommended to put these uncommon header files in soc_util.h so that
Xeon-SP codes refer to soc_util.h to include them in a clean way.
TEST=intel/archercity CRB
Change-Id: Icfc20921efe00bc69b0c16c665f65f5baae4c309
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81229
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ADL-N FSP uses 202111 Edk2. select UDK_202111_BINDING Kconfig for ADL-N
SoC.
BUG=b:296433836
TEST=Able to build and boot google/crassk.
Change-Id: If277ede4307515035389cd0e9d34c15cc80f278c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80274
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds config-based guards for Usb4CmMode and CnviWifiCore UPDs, specific
to Twin Lake SoCs (SOC_INTEL_TWINLAKE).
Prevents compilation errors due to missing UPD definitions.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I6e0a9a7536df6295e23bf06003539e56bb98a311
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81376
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the last FSP submodule update for Elkhart Lake commit f8df905e7baf
("3rdparty/fsp: Update submodule to upstream master"), the binary name
was changed to FSP.fd.
Change-Id: Ibc87ea2744e971d58e9a402f7cf04ef3f316f3b8
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Drop RMRR entry for XHCI controller since it's not under BIOS control.
There's no USB-PS/2 emulation done in SMM, hence it's not needed.
TEST=intel/archercity CRB
Change-Id: I5afd68371d71a00988fe0f8a6045ec5ce2adc6a1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81297
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Let ACPI DSDT figure out by itself if a stack is enabled.
Allows to drop uncore_fill_ssdt() on all platforms.
TEST=intel/archercity CRB
Change-Id: Ib9051d608147f2de228509ff6b13871ca3183979
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81273
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
As of now coreboot only supported one PCI segment group and thus the
MMCONF size had to be limited to 256 buses on ibm/sbp1. Since the
default FSP doesn't allow to disable unused IIO stacks a patched
version had to be used. Those unused IIO stacks consume lots of PCI
bus ranges, leaving no free buses for the secondary side behind PCI
bridges. The IIO disable mechanism doesn't work after ACPI G3 exit
and thus requires multiple reboots when the previous state was G3.
Since coreboot now supports multi PCI segment groups enable 512
MMCONF buses on 4S platforms by default and drop the IIO stack
disable UPDs on ibm/sbp1. This allows to boot faster without the
need for a patched FSP.
The use of multiple PCI segment groups might prevent legacy software
from working properly, however the only board where multiple PCI
segment groups are used uses u-root as default payload.
TEST=Booted on ibm/sbp1 to ubuntu22.04 using two PCI segment groups.
TEST=intel/archercity CRB
Change-Id: I4e6e5eca1196d4ab50e43b4b58d24eca444ab519
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add PCI enumeration support by reading the PCIeSegment reported in the
FSP HOB and add it when creating the PCI domain for each stack.
The PCI enumeration will be able to scan the additional PCI segment
groups and properly handle those devices.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups enabled
to ubuntu 22.04.
TEST=intel/archercity CRB
Change-Id: I0ba5e426123234979d746d3bdfc1ddfbd71c3447
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79878
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For every PCI segment group generate a new SATC header.
Allows to generate proper ACPI code when multiple PCI segment
groups are enabled.
TEST=Booted on ibm/sbp1 with multiple PCI segment groups.
Properly generates multiple SATC headers.
TEST=intel/archercity CRB
Change-Id: I93b8ee05a7e6798e034f7a5da2c6883f0ee7a0e5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The DMAR entries of type "PCI" have no "Enumeration ID" and thus
there's no need to print it. Drop all unused Enumeration IDs to
simplify the code and debug prints.
Document ID: Intel Virtualization Technology for Directed I/O
Architecture Specification, Rev. 4.0, Order Number: D51397-015
TEST=intel/archercity CRB
Change-Id: I009fbfb9f9d62855d351c5db2d3d88722b5dbfa2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81186
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert the 'select SOC_AMD_OPENSIL_STUB' statement to a config option
and give it a prompt. This allows for internal development of openSIL
and corresponding coreboot source, and controllable using a defconfig.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I2b48e2bbf71cd94ac7ecec13834ba36aa6c241ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` configuration
at the SoC level for all MTL devices. This change streamlines the
configuration process, avoiding redundant selections on individual
mainboards.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot functionality on google/ovis and google/rex.
Change-Id: I3aa3a83c190d0a0e93c267222a9dca0ac7651f9c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch refactors RAMTOP MTRR type selection to address a critical
NEM logic bug on SoCs with non-power-of-two cache sets. This bug can
cause runtime hangs when Write Back (WB) caching is enabled.
Workaround: Force MTRR type to WC (Write Combining) on affected SoCs
when the cache set count is not a power of two.
BUG=b:306677879
BRANCH=firmware-rex-15709.B
TEST=Verified boot on google/ovis and google/rex (including Ovis with
non-power-of-two cache configuration).
Change-Id: Ia9a8f0d37d581b05c19ea7f9b1a07933caa956d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81269
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since
all code is BSD licensed anyway.
It also moves some code from libpayloads stdlib.h to
commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is
useful for a subsequent commit that adds devicetree.c into commonlib.
Also we don't support DMA on arm platforms in coreboot (only libpayload)
therefore `dma_malloc()` has been removed and `dma_coherent()` has been
moved to architecture specific functions. Any architecture that tries to
use `dma_coherent()` now will get a compile time error. In order to not
break current platforms like mb/google/herobrine which make use of the
commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a
stub has been added to arch/arm64/dma.c.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Rewrite the function by iterating IOMMU (Input/Output Memory
Management Unit) devices instead of iterating socket and stacks,
which is more aligned to coreboot infrastructure.
TEST=intel/archercity CRB
coreboot DRHD generation is compared, the order of sections are
changed as expected but the content is kept equvalient.
Change-Id: I700513e05181303cf3f4effc793a872eb23340cb
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81228
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Obtain IOMMU (Input/Output Memory Management Unit) info and
enumerate devices using device utils instead of FSP HOB interface,
which might change across SoC generations and no ambiguity across
multiple PCIe segments.
TEST=intel/archercity CRB
coreboot DRHD generation log no changes before and after
Change-Id: Ic5c404899172a0e4fba2721b8e8ca6c1f0856698
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81227
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pmc_gpe_init uses soc_get_gpi_gpe_configs to initialize dw0, dw1
and dw2. dw0, dw1 and dw2 are uninitialized before calling
soc_get_gpi_gpe_configs. This is error prone for some soc
implementations where soc_get_gpi_gpe_configs does nothing.
This patch is simple, just to assign zero values to dw0, dw1 and
dw0, to enhance the code robustness.
TEST=intel/archercity CRB
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Change-Id: I8a710a2ac1482eed8c11977d51b187d834122d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81210
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In Xeon-SP, the domain0, which is located at stack0, usually needs
special handling due to the compatible devices on it (HEPT, IO-APIC
and legacy IOs). This patch adds util function detect whether a
give domain or stack is with such a role.
TEST=intel/archercity CRB
Change-Id: I2f26b4ac54091c24c554f17964502c364288aa40
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
For Xeon-SP, there are 4 main domain roles (PCIe/CXL/IOAT/UBOX).
This patch adds util function to check whether a given domain
belongs to one of these roles, or a give device belongs to
a domain of the specific role.
TEST=intel/archercity CRB
Change-Id: I6b31c29564c774c27e86f55749ca9eca057a0cfe
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Drop SoC specific code and use generic implementation provided
by pci_domain_fill_ssdt.
TEST=Booted on IBM/SBP1 to Ubuntu 22.04.
TEST=intel/archercity CRB
Change-Id: I8b0bc2eb02569b5d74f8521d79e0af8fee880c80
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80796
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use CONFIG_MAX_SOCKET instead of the IIO_UDS hob.
Allows to drop the argument in Xeon-SP common layer.
TEST=intel/archercity CRB
Change-Id: I05ec127f2bf84d3c242c3b0bca9709a0a7a4b52b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81181
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Remove those MSVC compiler defaults checks so that the GCC defaults for
wchar_t can be used. The FSP interface does not depend on wchar_t.
TEST: the resulting binaries are the same for intel/mtlrvp
Change-Id: I0ee1abc7e9ba46665838b63a6cfe0f4aa300114c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This reverts commit 6995efbd1b986d0426ca513fd2e56771dd489f16.
Reason for revert: Submitted out of order and broke the coreboot build:
src/soc/intel/xeon_sp/uncore_acpi.c:275:6: error: call to undeclared function 'is_dev_on_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
275 | if (is_dev_on_domain0(iommu)) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:343:35: error: call to undeclared function 'is_dev_on_ioat_domain'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
343 | if (CONFIG(HAVE_IOAT_DOMAINS) && is_dev_on_ioat_domain(iommu)) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:423:4: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
423 | assert(vtd_mmio_cap != 0xffffffffffffffff);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:423:4: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:455:3: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
455 | assert(ptr);
| ^~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:455:3: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:540:7: error: call to undeclared function 'is_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
540 | if (is_domain0(dev_get_pci_domain(dev))) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:546:2: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
546 | assert(iommu0);
| ^~~~~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:546:2: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
Change-Id: I8b66177119ea5f55913a16aae06a3dcb807c2c64
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 6833e8c01afc2827f150135f3805dc71820ddaa4.
Reason for revert: Submitted out of order and broke the coreboot build.
src/soc/intel/xeon_sp/uncore_acpi.c:275:6: error: call to undeclared function 'is_dev_on_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
275 | if (is_dev_on_domain0(iommu)) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:343:35: error: call to undeclared function 'is_dev_on_ioat_domain'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
343 | if (CONFIG(HAVE_IOAT_DOMAINS) && is_dev_on_ioat_domain(iommu)) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:423:4: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
423 | assert(vtd_mmio_cap != 0xffffffffffffffff);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:423:4: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:455:3: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
455 | assert(ptr);
| ^~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:455:3: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:540:7: error: call to undeclared function 'is_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
540 | if (is_domain0(dev_get_pci_domain(dev))) {
| ^
src/soc/intel/xeon_sp/uncore_acpi.c:546:2: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference]
546 | assert(iommu0);
| ^~~~~~~~~~~~~~
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^~~~~~~~~~~~~~~~~
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^~~~~~~~~~~~~~~~~~~~~~
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^~~~~~~~~~~~~~~~
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^~~~~~~~~~~~~~~~~~~~~
src/soc/intel/xeon_sp/uncore_acpi.c:546:2: note: consider using __builtin_trap() or qualifying pointer with 'volatile'
src/include/assert.h:85:27: note: expanded from macro 'assert'
85 | #define assert(statement) ASSERT(statement)
| ^
src/include/assert.h:56:7: note: expanded from macro 'ASSERT'
56 | if (!__build_time_assert(x) && !(x)) { \
| ^
src/include/assert.h:27:40: note: expanded from macro '__build_time_assert'
27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0)
| ^
src/include/assert.h:105:2: note: expanded from macro 'dead_code_t'
105 | *(type *)(uintptr_t)0; \
| ^
Change-Id: If919d6fa578a82fbb6bc5e1fd2adf4e9f59cab95
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81232
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Rewrite the function by iterating IOMMU (Input/Output Memory
Management Unit) devices instead of iterating socket and stacks,
which is more aligned to coreboot infrastructure.
TEST=intel/archercity CRB
coreboot DRHD generation is compared, the order of sections are
changed as expected but the content is kept equvalient.
Change-Id: I4c1cbf8d8fc93f746640efc3a82c539dcb3fdee2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Obtain IOMMU (Input/Output Memory Management Unit) info and
enumerate devices using device utils instead of FSP HOB interface,
which might change across SoC generations and no ambiguity across
multiple PCIe segments.
TEST=intel/archercity CRB
coreboot DRHD generation log no changes before and after
Change-Id: Idcfa899c764ffe51db5ed202ead07ad7b6868864
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81048
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove debug message since it's static information.
Remove additional uint_8 varience and return below settings
directly:
1. CONFIG_SOC_INTEL_USB2_DEV_MAX
2. CONFIG_SOC_INTEL_USB3_DEV_MAX
3. MAX_TYPE_C_PORTS
4. CONFIG_MAX_TBT_ROOT_PORTS
5. CONFIG_MAX_ROOT_PORTS
6. CONFIG_MAX_PCIE_CLOCK_SRC
7. CONFIG_SOC_INTEL_UART_DEV_MAX
8. CONFIG_SOC_INTEL_I2C_DEV_MAX
9. CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX
BUG=none
TEST=Build and test on rex/karis, system can boot to OS
Change-Id: I26e882d2d9dcbef84718924aaab3864d89c58f39
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
For Xeon-SP, it's common pattern to find devices under specific
socket, stack and domain. This patch adds util function for
these operations.
TEST=intel/archercity CRB
Change-Id: I163eacae363334919fd66d571b7e0415e77bd52d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
