summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-08-31soc/amd/picasso/southbridge.h: rename GPP clock setting offsetsFelix Held
The _SHIFT postfix is a bit clearer than the _SHL one and more in line with the names used for this kind of defines in coreboot. The documentation on that register is currently wrong and will hopefully be fixed in the future; the defines should now match the hardware. BUG=b:149970243 BRANCH=zork Change-Id: I977f107d466521484ca13fa1f4dd86a50c8150d7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31soc/amd/picasso/southbridge.h: replace GPP_CLK_REQ_MAP_* with macrosFelix Held
Replacing the existing defines with macros makes them easier to use in a function that applies the setting for a certain GPP/GFX clock output. Also add macros for statically enabling or disabling the clock outputs and not only for configuring them as controlled by the #CLK_REQx pins. BUG=b:149970243 BRANCH=zork Change-Id: I14198f224639721fe6ca71ca3dcd9cb413a587d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31soc/amd/picasso/southbridge.h: remove OSCOUT*_CLK_OUTPUT_ENB definitionsFelix Held
On Picasso MISC_CLK_CNTL1 doesn't contain OSCOUT[12]_CLK_OUTPUT_ENB and this was probably just copied over from stoneyridge. BUG=b:149970243 BRANCH=zork Change-Id: I32f459026c4e8632672123681b20736245f198b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44886 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31{intel/gma,include/device}: Delete unused 'drm_dp_helper.h' fileElyes HAOUAS
'drm_dp_helper.h' file is duplicated and not used. Change-Id: Ibb08f7ff91c3914940dfe899be331b06e292c7c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-29PCI IDs: Add PCI ID for CML DPTF/DTT PCI deviceEdward O'Callaghan
This PCI ID is required in order for the CML devices to perform SSDT generation for DPTF. CML Processor, EDS, Vol 1, Table 9-5, Section 9.2. BUG=b:158986928 BRANCH=puff TEST=builds Signed-off-by: Edward O'Callaghan <quasisec@google.com> Change-Id: I94aea6b9e0f60656827daada7b2cc2741604b8b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Andrew McRae <amcrae@google.com>
2020-08-28amd/picasso/psp_verstage: add vboot rsa functionKangheui Won
Add vb2ex_hwcrypto_rsa_verify_digest function for verifying rsa signature against digest using PSP svc. This function will be later used by vboot to accelerate rsa verification. BUG=b:163710320, b:161205813 TEST=build zork firmware with vboot modification, confirm it's booting and boot time is reduced by ~230ms. Change-Id: Ic5c1d13092db5a84191642444f3df9c26925e475 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44456 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28soc/amd/picasso/romstage: Set SATA enable UPD if controller is enabledMatt Papageorge
FSP has recently added support for a UPD switch to power gate SATA. This change adds the coreboot side of the feature. To avoid having two SATA enable options, the value of the sata_enable UPD is determined by the enable state of the AHCI controller in the platform devicetree. BUG=b:162302027 BRANCH=zork TEST=Verify AHCI controller can be hidden/disabled. Change-Id: I48bf94a7e6249db6079a6e3de7456a536d54a242 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44067 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28vendorcode/intel/fsp/fsp2_0/CPX-SP: update to ww34 release and adapt socJonathan Zhang
Intel CPX-SP FSP ww34 release added some features: a. change DDR frequency limit. b. define MRC debug message verbosity level. c. enable/disablee of PCH DCI. In addition, there are some changes to HOB data structures. Update UPD and HOB header files and adapt soc accordingly. TESTED=booted on YV3 DVT to target OS command line. Also rebooted okay. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Iadbf5dc850c445f988bc7f07a24165abed2298c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44685 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28soc/intel/tigerlake: add ddr4-spd-empty.hexAaron Durbin
In generating the potential spds the ddr4-spd-empty.hex was accidentally omitted. Generated from: go run util/spd_tools/ddr4/gen_spd.go src/soc/intel/tigerlake/spd/ \ util/spd_tools/ddr4/global_ddr4_mem_parts.json.txt TGL Change-Id: Ic8b9449830fb5405ebf138ebd54f41b0f76ba584 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44908 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
Switch all zork boards to use generated generic SPDs from spd_tools. HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was removed. picasso/Makefile.inc was updated to populate the 2nd APCB channel based on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd entires with _x1/_x2. Command to generate files: $ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do n=$(basename ${b}); if [ "${n}" = "baseboard" ]; then continue fi go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \ src/mainboard/google/zork/variants/${n}/spd \ src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt done BUG=b:162939176 TEST=Boot ezkinil and dalboz check dmidecod -t17 Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28util: Add memory parts needed by zork boardsRob Barnes
Add memory parts needed by zork boards. Attributes are derived from data sheets. BUG=b:162939176 TEST=Compared generated SPDs with data sheets and checked in SPDs Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I67f205f9af24bbc5c12656be1f363a15fe975955 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44447 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28util/gen_spd: translate DeviceBusWidth to die bus widthNick Vaccaro
If a memory part is a x16 part that has two dies and only a single rank, then the x16 describes the part width (since this solution will need to be a stacked solution) and as such, we must translate the DeviceBusWidth to the "die bus width" instead. Change DeviceBusWidth variable name to PackageBusWidth to be more descriptive BUG=b:166645306, b:160157545 TEST=run gen_spd and verify that spds for parts matching description above changed appropriately. Change-Id: Ia6f3ca109d344b7a015da28125a94ce10d2bdfb8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-28soc/mediatek/mt8192: Use SPI-NOR as flash controllerCK Hu
Add a SPI-NOR flash controller which supports pio mode. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I1e38672a532dd8234b3ef24c84113888c8795810 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-28util: rename lp4x spds to include "lp4x-" in nameNick Vaccaro
Change lp4x spd names to include lp4x memory type (eg. lp4x-spd-1.hex). BUG=b:160157545 TEST=run gen_part_id for volteer variants and verify that it changed spd names to prepend the "lp4x-" to the filename.. Change-Id: I0c59da7eb78f34640aad2e852ca725d3e8571a8e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44784 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-28util: volteer/dedede: move generic SPDs to common locationNick Vaccaro
Now that generic SPD files have the memory type prepended to the filename, they can be stored in the same location. This CL moves the generic SPDs to the new location. Change the ddr4 gen_part_id.go and gen_spd.go tools to use "ddr4_spd_manifest.generated" instead of "spd_manifest.generated". Change the lpddr4x gen_part_id.go and gen_spd.go tools to use "lp4x_spd_manifest.generated" instead of "spd_manifest.generated". Move TGL DDR4 and LPDDR4x generic SPDs into a common location. Move JSL DDR4 and LPDDR4x generic SPDs into a common location. Change the volteer/spd/Makefile.inc to use the new path for the spds. Change the dedede/spd/Makefile.inc to use the new path for the spds. BUG=b:165854055 TEST="emerge-volteer coreboot" and verify all variants build correctly. Change-Id: I83b088cb718d15ffd3012c84a12b5231ae84a3e4 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44648 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-27symbols: Change implementation details of DECLARE_OPTIONAL_REGION()Julius Werner
It seems that GCC's LTO doesn't like the way we implement DECLARE_OPTIONAL_REGION(). This patch changes it so that rather than having a normal DECLARE_REGION() in <symbols.h> and then an extra DECLARE_OPTIONAL_REGION() in the C file using it, you just say DECLARE_OPTIONAL_REGION() directly in <symbols.h> (in place and instead of the usual DECLARE_REGION()). This basically looks the same way in the resulting object file but somehow LTO seems to like it better. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I6096207b311d70c8e9956cd9406bec45be04a4a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-08-27soc/intel/common: Include Elkhart Lake SA IDsTan, Lean Sheng
Add additional Elkhart Lake specific SA IDs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I41af9b17b8121f3b47f2242d9beeec297893b378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40854 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-27soc/intel/common: Add Elkhart Lake B0 CPU IDTan, Lean Sheng
Add Elkhart Lake B0 CPU ID. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I90fab9a6392443005ee7224049931c687cb77c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-26soc/mediatek: Include addressmap.h in gpio_common.hCK Hu
The gpio_common.h needs EINT_BASE from addressmap.h. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I20834e38343410526da0a489fed907acbf479d02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-26soc/intel/tigerlake: Rename pch_init() codeAlexey Buyanov
Rename the pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=successfully built and booted TGLRVP Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com> Change-Id: Ib7450fcdc3024dfb5e375a54f9bdcdca9bc373d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-25util: Add spd_tools to generate DDR4 SPDs for TGL boardsNick Vaccaro
Serial Presence Detect (SPD) data for memory modules is used by Memory Reference Code (MRC) for training the memory. This SPD data is typically obtained from part vendors but has to be massaged to format it correctly as per JEDEC and MRC expectations. There have been numerous times in the past where the SPD data used is not always correct. In order to reduce the manual effort of creating SPDs and generating DRAM IDs, this change adds tools for generating SPD files for DDR4 memory used in memory down configurations on Intel Tiger Lake (TGL) based platforms. These tools generate SPDs following JESD79-4C and Jedec "4.1.2.L-5 R29 v103" specification. Two tools are provided: * gen_spd.go: Generates de-duplicated SPD files using a global memory part list provided by the mainboard in JSON format. Additionally, generates a SPD manifest file (in CSV format) with information about what memory part from the global list uses which of the generated SPD files. * gen_part_id.go: Allocates DRAM strap IDs for different DDR4 memory parts used by the board. Takes as input list of memory parts used by the board (with one memory part on each line) and the SPD manifest file generated by gen_spd.go. Generates Makefile.inc for integrating the generated SPD files in the coreboot build. BUG=b:160157545 Change-Id: I263f936b332520753a6791c8d892fc148cb6f103 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-25soc/amd/picasso: If psp_verstage is in RO, don't reset on errorMartin Roth
If there's already been an error and PSP_verstage is booting to RO, don't reset the system. It may be that the error is fatal, but if the system is stuck, don't intentionally force it into a reboot loop. BUG=None TEST=Force an error, still boots to RO instead of going into a boot loop Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibb6794fefe9d482850ca31b1d3b0d145fcd8bb8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-25soc/mediatek/mt8192: Add dramc param structHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I3bae57e6777ab6fc46c771a034f814dd1175be95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-25soc/intel/jasperlake: Disable multiphase SI initRonak Kanabar
Jasper Lake does not have any use case for multiphase SI init so Disable it. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: I2d591b46c403e68ff0b41ac8f87c742ae774111e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-25soc/intel/jasperlake: Select PLATFORM_USES_FSP2_2Ronak Kanabar
Add support for FSP 2.2 for jasperlake by selecting PLATFORM_USES_FSP2_2 config. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Change-Id: Ia606ec26da93242ecdd602a9b3badbece5dcd034 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/amd/picasso: Reboot for recovery if no psp workbuf is foundMartin Roth
Instead of halting if the vboot workbuf is not passed to coreboot by the PSP, reset and reboot into recovery mode. This process is made more difficult because if the workbuf isn't available, we can't reboot directly into recovery - the workbuf is needed for that process to be done through the regular calls, and we don't want to go around the vboot API and just write into VBNV directly. To overcome this, we set a CMOS flag, and reset the system. PSP_verstage checks for this flag so it will update VBNV and reset the system after generating the workbuf. BUG=b:152638343 TEST=Simulate the workbuf not being present and verify the reboot process. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I049db956a5209904b274747be28ff226ce542316 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-24mrc_cache: Add mrc_cache fetch functions to support non-x86 platformsShelley Chen
Create two new functions to fetch mrc_cache data (replacing mrc_cache_get_current): - mrc_cache_load_current: fetches the mrc_cache data and drops it into the given buffer. This is useful for ARM platforms where the mmap operation is very expensive. - mrc_cache_mmap_leak: fetch the mrc_cache data and puts it into a given buffer. This is useful for platforms where the mmap operation is a no-op (like x86 platforms). As the name mentions, we are not freeing the memory that we allocated with the mmap, so it is the caller's responsibility to do so. Additionally, we are replacing mrc_cache_latest with mrc_cache_get_latest_slot_info, which does not check the validity of the data when retrieving the current mrc_cache slot. This allows the caller some flexibility in deciding where they want the mrc_cache data stored (either in an mmaped region or at a given address). BUG=b:150502246 BRANCH=None TEST=Testing on a nami (x86) device: reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I259dd4f550719d821bbafa2d445cbae6ea22e988 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44006 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24soc/amd/common: Move interrupt and wake status clearJosie Nordrum
Move interrupt status and wake status clearing to after GPIO config so that configuration does not incorrectly set interrupt or wake status. i.e. when PULL_UP is configured on a pad, it incorrectly sets in the interrupt status bit. Thus, the interrupt status bit must be cleared after initial pad configuration is complete. BUG=b:164892883, b:165342107 TEST=None BRANCH=None Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: If4a5db4bfa6a2ee9827f38e9595f487a4dcfac2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-24soc/intel/jasperlake: Run pmc_set_acpi_mode() during .init in pmc_opsKane Chen
pmc_set_acpi_mode will set EC SMI mask to 1 in the end. However google_chromeec_events_init will clear EC SMI mask. If google_chromeec_events_init is ran after pmc_set_acpi_mode, the EC SMI mask will be 0 in depthcharge and causes lidclose function not working. So, pmc_set_acpi_mode() should run after google_chromeec_events_init. This code is mainly from CB:42677 BUG=b:16338215 TEST=Close lid in depthcharge and the dut can be shutdown on waddledoo. Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I0f06e8b5da00eb05a34a6ce1de6d713005211c08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-24soc/amd/picasso: Add console & timestamp buffers to psp_verstageMartin Roth
Create areas for console & timestamp data in psp_verstage and pass it to the x86 to save for use later. BUG=b:159220781 TEST=Build & Boot trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I41c8d7a1565e761187e941d7d6021805a9744d06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-24soc/intel/tigerlake: Fix IPU and Vtd configRavi Sarawadi
- FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. - Enable Vtd IPU and IGD settings only if respective IPs are enabled. BUG=165340186 BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: Ieff57fb0ebc8522546d6b34da6ca2f2f845bf61d Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44627 Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Reviewed-by: John Zhao <john.zhao@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24soc/intel/jasperlake: use UDK_202005_BINDINGRonak Kanabar
JSL FSP support FSP 2.2. FSP 2.2 introduces Multiphase SI init support through the FSP-S arch UPD. The FSP-S arch UPD structure is added in edk2 stable 2020 branch. Switching the support for JSL to edk2-stable202005 to intercept the FSP2.2 related support. BUG=b:162184827 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: chrome-internal:3221772 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: Ieed1b58e491d5a89043c418f0f44f2ee9af111f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44576 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24soc/sifive: Drop unneeded empty linesElyes HAOUAS
Change-Id: I20008c71d5b573d72a09068626523e10faa2d632 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-24soc/amd/picasso: Store ddr_frequency in MT/sRob Barnes
This field eventually gets interpreted as MT/s by SMBIOS instead of MHz. Translate from Mhz to MT/s by multiplying by 2. BUG=b:154654737 TEST=dmidecode -t 17 matches expected speed Change-Id: I51b58cb0380f2a2bf000347395ac918ac0717060 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-24soc/intel/common: Add downgrade support for CSE FirmwareSridhar Siricilla
Add downgrade support for CSE RW firmware. When CSE FW is downgraded, CSE may get into data compatibility issues. To avoid such issues, coreboot sends DATA CLEAR HECI command to CSE to clear CSE run time data on proactive basis during a downgrade and when CSE indicates a data mismatch error through GET_BOOT_PARTITION_INFO. BUG=b:144894771 TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I0a3a3036e448e5a743398f6b27e8e62965dbff3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40561 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-23soc/amd/picasso/romstage: Set HDA disable UPD if controller disabledFelix Held
FSP has recently added support for a UPD switch to disable the non-GPU HD Audio controller. This change adds the coreboot side of the feature. To avoid having two HD Audio enable options, the value of the hd_audio_enable UPD is determined by the enable state of the non-GPU HD Audio controller in the platform devicetree. BUG=b:158535201,b:162302028 BRANCH=zork TEST=With the corresponding FSP change applied the non-GPU HD Audio device is hidden when switched off in devicetree and remains present and functional when switched on in devicetree. Change-Id: Ib2965e0742f4148e42a44ddad8ee05f0c4c7237e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44680 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
Allow configuring FSP option PcieRpSlotImplemented. Also, update all related devicetrees and configure PcieRpSlotImplemented to keep the current behaviour. Change-Id: I6c57ab0ae50a37cd9a90786134e9056851a86a3c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-21soc/amd/picasso: If using VBOOT, skip the APOB_NV region for ROMartin Roth
When booting from the RO region of a VBOOT enabled ROM, there shouldn't be a reliance on anything outside of the RO section. This includes the APOB_NV region (similar to the MRC cache region). By skipping the region when setting up the BIOS Directory table, the PSP won't try to use the region when booting. The APOB_NV region is still used for the VBOOT RW sections. BUG=b:158363448 TEST=Build RO with no APOB_NV region. Dump the BDT and verify that it's not in RO, but is in RW_A & RW_B. Boot into recovery. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I13c35ba8a2331492744d2acf257db15e4a53102a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21soc/amd/common: add rudimentary ATIF supportAaron Durbin
The Linux kenerl driver for AMD gpu currently has a floor value of 12 for brightness settings (AMDGPU_DM_DEFAULT_MIN_BACKLIGHT). AMD indicates they did this because they were concerned with certain panels flickering at lower backlight values. However, for unaffected panels it's desirable to be able to have the panel "turn off" at the lowest backlight setting. The only way to do that is to provide ATIF bindings that indicate backlight range. Option SOC_AMD_COMMON_BLOCK_GRAPHICS_ATIF is added to provide a full range for the backlight setting. If needed, this path can be built upon for fuller support, but for the time being this is the only thing necessary to make the backlight be full range. BUG=b:163583825 Change-Id: If76801a8daf6a5e56ba7d118956f3ebce74e567a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21SMM: Validate more user-provided pointersPatrick Rudolph
Mitigate issues presented in "Digging Into The Core of Boot" found by "Yuriy Bulygin" and "Oleksandr Bazhaniuk" at RECON-MTL-2017. Validate user-provided pointers using the newly-added functions. This protects SMM from ring0 attacks. Change-Id: I8a347ccdd20816924bf1bceb3b24bf7b22309312 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-21soc/intel/tigerlake: Enable long cr50 ready pulsesJes Klinke
A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, to have Cr50 generate longer than default interrupt pulses. This needs to be selected on all Tiger Lake systems, since Tiger Lake (and likely future Intel SoCs) require at least 100us interrupt pulses. TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: I20100d72ce426203943c1788d538bb2cd9d82e11 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-21soc/intel/apollolake: Select HAVE_ASAN_IN_ROMSTAGEHarshit Sharma
Enable ASan in romstage for apollolake as it has been tested on Siemens MC-APL3. Change-Id: I2f2f965151a4ef4672f2f16979a6ad8492879aeb Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-20cse_lite: Move global reset after MRC writebackCaveh Jalali
With CSE-lite enabled, we were going through the lengthy memory training procedure twice on the first power-on boot or after full BIOS SPI flash update. This moves the global reset performed to achieve the CSE-lite RO to RW reboot to a later boot phase so that it happens after the memory training data has been written to the MRC cache. Now, the 2nd (and subsequent) reboot can utilize the memory training data established during the 1st boot. This reduces the first boot time by about 20s on a 16GB system. Looking at the timing stats form cbmem, the normal boot penalty is about 300ms - mostly attributed to running FspSiliconInit a 2nd time. We will get this time back when the mrc_cache refactoring effort lands (cb:44196, et. al). BUG=b:162021048 TEST=Booted on volteer, confirmed 20s faster boot time. Change-Id: Ia42d72fdec41f9792ab8f04205b20a55758a4235 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-20soc/amd/acpi: Move ACPI IVRS generation to corebootJason Glenesk
Add code for IVRS generation to coreboot. Publish coreboot generated structure rather than IVRS generated by FSP binary. Reference Doc: 48882_IOMMU_3.05_PUB.pdf BUG=b:155307433 TEST=Boot trembyle to shell and extract and compare IVRS tables and make sure they cover the same devices. Change-Id: I693f4399766c71c3ad53539634c65ba59afd0fe1 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-20soc/intel/xeon_sp/cpx/Kconfig: Relocate 'select CACHE_MRC_SETTINGS'Elyes HAOUAS
This will remove the warning: "src/soc/intel/xeon_sp/cpx/Kconfig:79:warning: config symbol 'CPU_BCLK_MHZ' uses select, but is not boolean or tristate" Change-Id: I2cfaf347b638e3847caa167e7efda89e9202960a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-08-19cpu/ti/am335x: Move from cpu to soc in treeSam Lewis
The AM335X is a SoC, so should be in the soc tree. This moves all the existing am335x code to soc/ and updates any references. It also adds a soc.c file as required for the ramstage. Change-Id: Ic1ccb0e9b9c24a8b211b723b5f4cc26cdd0eaaab Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-19soc/amd/picasso: log and print GPIO wake eventsAaron Durbin
Capture the GPIO subsystem wake state and add events to the eventlog. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7f10bf4599ea7928cc87b6b10ac11a7c30e58406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19soc/amd/common: add gpio subsystem event reportingAaron Durbin
In order to log gpio events for wake purposes the state of the gpio subsystem should be snapshotted. Add the ability to capture state of gpio subystem as well as saving up to 16 gpios that indicate their wake status. Likewise, provide the eventlog additions based on state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Use cbfs to locate the AMD firmwareMartin Roth
Switch from locating the AMD firmware in the RW_A & RW_B regions with their hardcoded locations to using CBFS to find them. They still need to be at the hardcoded locations so that we can set the location inside the binary, but instead of just setting the pointer directly to them, we now search for them with cbfs. BUG=b:154441227 TEST=Boot & verify that binaries are located in both RW-A & RW-B Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I27b0593e0db7a9e6ba9b0633ac93b4d93954f002 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42831 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Remove now unused #defineMartin Roth
This #define wasn't removed when the tests were removed, so get rid of it now. BUG=None TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ie0005b6ee97037bf3dfb80f0c2408d8bd9ee9633 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-18soc/amd/picasso: fix GPE snapshot stateAaron Durbin
In CB:44488 the cbmem addition was re-filling the object when it should be memcpy()ing from static object. Correct that oversight. The side effect from the previous implementation would be if FSP-M modified the GPE state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I158a89ae28431896fa9b5789292000fcbf0b066d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: rename ELOG_WAKE_SOURCE_GPIO to ELOG_WAKE_SOURCE_GPEAaron Durbin
The wake source macro for GPE events was using 'GPIO'. However, current usage is really all GPEs. Therefore, provide clarity in the naming in order to allow for proper GPIO wake events that are separate from the ACPI GPE block. BUG=b:159947207 Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18soc/intel/jasperlake: Fix PMC_GPE_DW mappingMeera Ravindranath
PMC_GPE_DW mapping was not configured correctly and hence coreboot skipped programming Tier 1 GPIOs resulting in failure of S3 wake from Trackpad. TEST=System should wake from S3 via trackpad Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-18soc/intel/jasperlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBMeera Ravindranath
Increase the cbmem console size from 3KB to 5KB in order to fix console overflow. Change-Id: Id7eb64feb91ec29df5402b2fb1bac3ff73cc5bb3 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44326 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Ic09fc4ff4ee5524d89366e28d1d22900dd0c5b4d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unuse '<timestamp.h>Elyes HAOUAS
Change-Id: I4fa03c4576bb0256b73f1d36ca840e120b750a74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<halt.h>'Elyes HAOUAS
Change-Id: I3037edf89c933f4f136ca61d6a5bce41126ec6b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18soc/intel/common/block/pmc/pmclib.c: Remove unused '<pc80/mc146818rtc.h>'Elyes HAOUAS
Change-Id: If7e99e1b1be38694ad2fedb528a5c1725b968943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44096 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <stddef.h>Elyes HAOUAS
Change-Id: Iae1e875b466f8a195653d897efa1b297c61ad0a5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <boot_device.h>'Elyes HAOUAS
Change-Id: I5589fdeade7f69995adf1c983ced13773472be74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42349 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unneded whitespace before tabElyes HAOUAS
Also remove unneded tab in 'picasso/Makefile.c' file. Change-Id: Id25b2d308645c449c205b3a946f89b6b6de62a47 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18xeon_sp/cpx: Fix get_system_memory_map to return the correct addressJohnny Lin
Similar to commit b45ed65, the HOB structure is actually a 8 byte address pointing to the HOB data. Tested=Verified the values of the hob fields are the same printed by soc_display_memmap_hob(). Change-Id: I348d3cd80a56e86d22f20fcadf0316b462b86829 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18xeon_sp/cpx: Enable ACPI P-state supportJingle Hsu
Implement ACPI P-state support to enable driver acpi_cpufreq. This patch leverages code from the Skylake project. Tested=On OCP Delta Lake cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 1501000 1500000 1400000 1300000 1200000 1100000 1000000 900000 800000 Change-Id: I3bf3ad7f82fbf196a2134a8138b10176fc8be2cc Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18soc/intel/jasperlake: Configure IPU based on devicetreeMaulik V Vaghela
FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. BUG=None BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-18soc/intel/common: Add support for LPSS UART in ACPI modePatrick Rudolph
Emit ACPI code for LPSS UARTs operating in ACPI mode. In this mode the device vendor ID reads as 0xffff, the PCI devices is still operate. Add ACPI device IDs for APL, GLK, SPT, SPT_H and CNP_H. The mainboard's devicetree needs to be adapted to include the chip driver and the PCI ID when it wouldn't have been hidden. Example: chip soc/intel/common/block/uart device pci 19.2 hidden register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2" end # UART #2 end Tested on Linux 5.6 with Sunrise Point ACPI ID for UART2. Tested on Windows for all other UARTs. Change-Id: I838d16322be38f5421c1f63b457a0af552e0ed96 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40405 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/amd/common: add GPE event logsAaron Durbin
GPE events were not be recorded in the eventlog. Add those to the eventlog when the status register indicates those events. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifb3167fd24f2171b2baf1a65eb81a318eb3e7a86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: snapshot chipset state early in boot sequenceAaron Durbin
Previously the chipset state was snapshotted very late in the boot (ramstage). Instead start gathering the state early in romstage prior to calling any FSP routines so there's a clean snapshot. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id41686e6cdf5bebc9633b514b4121b0447f9be2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/stoneyridge: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ib5aeec1733b6c9fa49569e30c4c369f70af0939c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I60e4a9bfdf2752923f46a35aaab7034f9fa9b309 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: removed unused functionsAaron Durbin
Now that all users of the functions manipulating global state and using soc-specific objects are removed remove those functions. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I18c4c8b0c7852dde8cf0b6b3f11e43e15c3ce155 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: use new ACPI helper functions from commonAaron Durbin
Transition the current call sequence to using the newly added common ACPI helper functions. Semantically, the expectations are that this sequence is the equivalent of previous acpi_clear_pm1_status(). However, in subsequent patches picasso will be snapshotting state way sooner than ramstage. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I34e2ba7c5cd123b98c39291537e74175ec043e85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/stoneyridge: use new ACPI helper functions from commonAaron Durbin
Transition the current call sequence to using the newly added common ACPI helper functions. Semantically, the expectations are that this sequence is the equivalent of previous acpi_clear_pm1_status(). BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id3ae19013c68d2c97b084046f600596ecc462374 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: add acpi_fill_gnvs()Aaron Durbin
In order to reduce code duplication provide an acpi_fill_gnvs() helper function. Intent is to move stoneyridge and picasso over to using this common implementation instead of duplicating it. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I21c6e2c24eaf42f31ae57c05df7f633d7dc266d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: add single function ACPI PM1 GPE helpersAaron Durbin
The existing code in common/block/acpi is mixing multiple operations: saving things to cbmem in common code but then soc code uses that information, reliant upon soc-specific struct soc_power_reg object, and only saving/snapshotting ACPI registers very deep in ramstage. To unwind the above provide some functions that are more targeted: - Add struct acpi_pm_gpe_state object - Add acpi_fill_pm_gpe_state() - Add acpi_pm_gpe_add_events_print_events() - Add acpi_clear_pm_gpe_status() BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia7afed2861343802b3c78728784f7cfaf6f53f62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/intel/skylake/acpi.c: Name devices on secondary busBenjamin Doron
Naming a device allows an ACPI _ROM method to be written for it. GPUs may require this to make the configuration data contained within available to an OS driver. This may be required for GPUs that do not contain their vBIOS, or perhaps the drivers require it in this form/fashion. Working on an Acer Aspire VN7-572G (Skylake-U). nouveau successfully obtains the vBIOS via ACPI (kernel 5.7.11). Change-Id: Ida87aebf8fdf341ab350c2bb3704d2ef695cf8f0 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-17soc/intel/tigerlake: Allow fine grained control of S0iX statesJes Klinke
Expose devicetree parameter to enable/disable each individual substate. See https://review.coreboot.org/c/coreboot/+/43741 for context. TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: I8a0cf820e20961486813067c6945fe07bc4899f7 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/44355 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17{soc/intel/common,sb/intel/lynxpoint}/hda_verb.c: Reduce differencesElyes HAOUAS
Change-Id: Ie63d7671eb19f0d4c4f67dfe242193e7949afdea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17soc/intel/common: Move common HDA registers to <device/azalia_device.h>Elyes HAOUAS
Change-Id: I9ea191e5076e2f055405dc34d46dbbb8cfb0015e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/intel/skylake: Call mainboard ACPI sleep methodsBenjamin Doron
Skylake mainboards also can implement ACPI functionality surrounding sleep. Tested on an Acer Aspire VN7-572G (Skylake-U). Change-Id: I969d92c7445b01964d92d28b21f6667614ea82e7 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17soc/intel/jasperlake: Add IGD Device IDKrishna Prasad Bhat
Add IGD Device ID for Jasperlake. Reference is taken from Jasperlake EDS volume 1(Document Number: 613601). TEST=Build and boot Jasperlake platform. Change-Id: Iab3ba286f36afbf9533ac3cc62891fa390ca2441 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44000 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/intel/jasperlake: Add FSP UPDs for minimum assertion widthsV Sowmya
Add the FSP UPDs for the chipset minimum assertion widths and Power cycle duration to the chip options which can be configured per mainboard. * PchPmSlpS3MinAssert: SLP_S3 Minimum Assertion Width Policy * PchPmSlpS4MinAssert: SLP_S4 Minimum Assertion Width Policy * PchPmSlpSusMinAssert: SLP_SUS Minimum Assertion Width Policy * PchPmSlpAMinAssert: SLP_A Minimum Assertion Width Policy * PchPmPwrCycDur: PCH PM Reset Power Cycle Duration * Check to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. BUG=b:159104150 Change-Id: I042e8e34b7dfda3bc21e5f2e6727cb7692ffc7f7 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-17soc/mediatek/mt8192: Initialize watch dog in bootblockCK Hu
Initialize watch dog so the system won't reboot on timeout. In addition, print the reason of reboot triggered by watch dog. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I7e849659700218f1c50365c2d68a32be2f703d94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-17soc/mediatek/mt8192: Initialize mmu in bootblockCK Hu
Initialize CPU mmu and config range. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I5ba405dab87d51d373704657ccb44c07c7249041 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-15soc/amd/picasso: use FADT devicetree configuration optionsMartin Roth
Two of the items in the FADT ACPI table frequently are partially board- specific, so let's make it easy to update them via devicetree settings. - fadt_boot_arch 0="legacy free" which while reasonable, probably isn't what will be wanted by most mainboards, so this should generally get updated in the specific devicetree. - In fadt_flags all chipset-specific flags get set while the mainboard has to set all other flags that it needs to have set. This patch changes the default for fadt_boot_arch. Change-Id: I6e8d0c60cadfdd24b6926703b252abbc56d436de Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14soc/intel/tigerlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBRavi Sarawadi
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 3KB to 5KB to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. Bug=None Branch=None Test=Boot Delbin and check 'cbmem -c | more' for full log message. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Id2ea64feb92ec29df5402b2fb1bac3ff73cc5bb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14soc/intel/skylake: Refactor PEG configurationFelix Singer
Simplify some if-blocks which are used for the configuration, enablement and disablement of the PEG devices. This changes the logic of the code, since it configures PegxEnable before the if-blocks, where x is the number of the PEG device, and the further configuration of the PEG devices depends on the enablement of PegxEnable. Change-Id: I6dd88ce752ce8f0255c424d0e5b2d8ef918885a1 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Factor out unnecessary if-else-blockFelix Singer
Move InternalGfx config option out of the if-else-block and replace the left over config option IgdDvmt50PreAlloc by a ternary expression. Also, adjust related code comments to fit the new logic of this code. This changes the logic of the code, since InternalGfx is configured first and IgdDvmt50PreAlloc depends on its value. The negation in the ternary expression is removed to improve the readability. Change-Id: I89ff17f4574a7ade228c1791f17ea072fb731775 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Use PEG definitions from pci_devs.hFelix Singer
Change-Id: I7114deed35f25e74ac508f08e9c85653a7fe39ed Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14soc/intel/skylake: Add PEG device definitions to pci_devs.hFelix Singer
Change-Id: Ib2453425f44e2b4abd5566f454ae68b704dbc33e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-14soc/amd/picasso/acpi: Set missing RTC offsetsRaul E Rangel
The RTC Date Alarm and RTC AltCentury fields are supported on picasso. These get consumed by the linux kernel: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/rtc/rtc-cmos.c;l=1243 BUG=b:160277722 TEST=Boot kernel and make sure suspend stress test works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie83d7e0a06107a6de095f3e4c521d91e90920c0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/44448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-14soc/intel/xeon_sp/cpx: add VT-d supportJonathan Zhang
Intel CPX-SP FSP added support for VT-d through adding UPD parameter X2apic. Based on devicetree.cb setting, enable VT-d programming through FSP-M. When VT-d is enabled, add DMAR ACPI table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic66374af6e53fb847c1bdc324eb3f4e01c334a94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/xeon_sp/cpx: remove unsupported configsJonathan Zhang
coherency_support and ats_support are not supported by CPX-SP FSP. Remove them from soc_intel_xeon_sp_cpx_config struct. Remove corresponding settings from DeltaLake devicetree.cb. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ibe1c4e88817fc4be7915e95fa829f0a4c0d947f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/common/cse_lite: Perform a board specific resetKarthikeyan Ramasubramanian
When CSE Lite jumps from RO to RW, global reset is initiated. When AP is reset as part of global reset, in some boards TPM initialization fails. This is because AP reset is not detected by TPM hosting an older firmware version. To signal TPMs running older firmware version about AP reset, a modified reset sequence needs to be performed. Hence add support to perform board-specific reset sequence. BUG=b:162290856, b:162386991 TEST=Ensure that the device boots to OS with the board-specific reset sequence when CSE Lite jumps from RO to RW with an older and newer Cr50 firmware. Change-Id: I8663e7f25461e58e45766e2ac00d752bfa191d8b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44187 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/intel/skylake: Refactor ternary expressionsFelix Singer
To be consistent with the rest of the tree, replace all left ternary expressions, which are used for device enablement / disablement, with `dev && dev->enabled`. Change-Id: Ie7afa48bf2c8bdad5a043f7cb6953d05b7b6597d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-13drivers/intel/fsp2_0: don't select FSP_USES_CB_STACK on FSP 2.0 platformFelix Held
soc/amd/picasso selected FSP_USES_CB_STACK even though it is FSP 2.0 based, so it doesn't reuse coreboot's stack, but sets up its own stack. In contrast to all other FSP 2.0 based platforms, this stack isn't in the CAR region, since AMD Picasso doesn't support CAR and the DRAM is already available when the x86 cores are released from reset. Selecting FSP_USES_CB_STACK ended up doing the right thing, but is semantically wrong. Instead of wrongly selecting FSP_USES_CB_STACK in soc/amd/picasso we take the corresponding code path if ENV_CACHE_AS_RAM is false which is only the case for non-CAR platforms. BUG=b:155501050 TEST=Timeless build results in an identical binary for amd/mandolin, asrock/h110m-dvs and intel/coffeelake_rvp11 which cover all 3 cases here. Change-Id: Icd0ff8e17a535e2c247793b64f4b0565887183d8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-08-13soc/intel/xeon_sp/cpx: add CPUID for CPX-SP A1 processorJonathan Zhang
Add CPUID for CPX-SP A1 (also called QS) processor. DeltaLake DVT server uses CPX-SP A1 processor. TESTED=booted DeltaLake DVT server to target OS. [root@localhost ~]# dmidecode -t 1 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Wiwynn Product Name: Delta Lake DVT Version: YoDL03 Serial Number: BZA02200122N01A UUID: 000A0A22-2C29-1ED6-8259-000055DA2BFF Wake-up Type: Reserved SKU Number: Not Specified Family: DeltaLake Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ic8975f6bf752fd685b38b2d1f0a4da41983b57f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-08-13soc/mediatek/mt8192: Add spi driverQii Wang
Add driver for MT8192 SPI controller TEST=Boots correctly on MT8192EVB Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I2094dd2f14ad19b7dbd66a8e694cc71d654a2b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-13soc/intel/common/block: Stitch CSE blobs into FW_MAIN_X partitionsSridhar Siricilla
Add Kconfig option for CSE me_rw blob path and stitch the me_rw blob into FW_MAIN_X partitions. BUG=b:145796136 Change-Id: I1d2908e9e16858c5f333e1b10b19d18b7ca27765 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35406 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/mediatek/mt8192: Add DRAM resource in ramstageCK Hu
Add DRAM resource in ramstage to load payload. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Iac02f81fc7d47851b3bba442eb7043169fbdbcfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 13:30:03 +0000