summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2021-09-11mipi: Make panel init callback work directly on DSI transaction typesJulius Werner
Our MIPI panel initialization framework differentiates between DCS and GENERIC commands, but the exact interpretation of those terms is left to the platform drivers. In practice, the MIPI DSI transaction codes for these are standardized and platforms always need to do the same operation of combining the command length and transfer type into a correct DSI protocol code. This patch factors out the various platform-specific DSI protocol definitions into a single global one and moves the transaction type calculation into the common panel framework. The Qualcomm SC7180 implementation which previously only supported DCS commands is enhanced to (hopefully? untested for now...) also support GENERIC commands. While we're rewriting that whole section also fix some other issues about how exactly long and short commands need to be passed to that hardware which we identified in the meantime. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I09ade7857ca04e89d286cf538b1a5ebb1eeb8c04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-09-08mb/google/cherry: Fix incorrect timestamps in eventlogChen-Tsung Hsieh
The eventlog requires RTC to provide correct timestamps, so we have to turn on the config and add the common drivers. BUG=b:199003609 TEST=check timestamp in 'mosys eventlog list' BRANCH=none Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Change-Id: Ia382cd023fcbfdf2c1efeb7b32c0b99feb71effa Reviewed-on: https://review.coreboot.org/c/coreboot/+/57403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-09-08soc/mediatek: preserve WDT reset reason for debuggingFengquan Chen
1. Disable external output reset signal in first WDT reset to preserve WDT original reset reason for WDT issue in kernel stage. 2. After preserved WDT reset reason, do fully reset again by sending external output reset signal. BUG=b:194025005 TEST=boot to kernel ok and function test pass Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.corp-partner.google.com> Change-Id: I5887a8312f4daab3cbd0a30fea0195670a932e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-26device/mipi: Move to drivers/mipiJulius Werner
Sounds like we prefer to have this under drivers/ instead of device/. Also move all MIPI-related headers out from device/ into their own directory. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib3e66954b8f0cf85b28d8d186b09d7846707559d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-08-23include/bcd: move bcd code to commonlib/bsd/includeRicardo Quesada
Move bcd2bin() / bin2bcd() functions to commonlib/bsd/include/ Also, the license is changed from GPL to BSD. This is because it is needed from "utils" (see CL in the chain). For reference bin2bcd() & bcd2bin() are very simple functions. There are already BSD implementations, like these ones (just to name a few): https://chromium.googlesource.com/chromiumos/platform/mosys/+/refs/heads/main/include/lib/math.h#67 http://web.mit.edu/freebsd/head/sys/contrib/octeon-sdk/cvmx-cn3010-evb-hs5.c BUG=b:172210863 TEST=make (everything compiled Ok). Change-Id: If2eba82da35838799bcbcf38303de6bd53f7eb72 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56904 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-23soc/mediatek/mt8195: Update clock square settingChun-Jie Chen
To reduce suspend power consumption, 1. Disable unused CLKSQ2. 2. Set CLKSQ_EN to sleep control for SPM 26M sleep control. No bus clock when enter 26m sleep control, and only control clock square by side band. Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Ia9a1735d6f508ce35b9af2d67831a3474255198b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57043 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-23soc/mediatek/mt8195: add HDMI low power settingRex-BC Chen
Add HDMI low power setting to reduce power consumption. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ica91645789e5de3401131e7050d2b1ee06c535dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/57042 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-18device: Move MIPI panel library from mainboard/google/kukui into commonJulius Werner
All boards that are trying to use MIPI panels eventually run into the problem that they need to store physical parameters and a list of DCS initialization commands for each panel, and these commands can be very different (e.g. a large amount of very short commands, a few very large commands, etc.). Finding a data format to fit all these different cases efficiently into the same structures keeps being a challenge, and the Kukui mainboard already once put a lot of effort into designing a clean, flexible and efficient solution for this. This patch moves that framework into a common src/device/mipi/ library where it can be used by other boards as well. (Also, this will hopefully allow us to save some duplicated work when using the same panel on different boards at some point.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I877f2b0c7ab984412b288e2ed27f37cd93c70863 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-08-12soc/mediatek/mt8192: move DFD driver to common folderRex-BC Chen
Move DFD driver to common folder so MT8195 can also use it. BUG=b:192429713 TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7937cddf5f3a66f9269a94301d3134e6f4f9f22e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-12soc/mediatek: revise the dependency of DVFS config optionsRex-BC Chen
The MEDIATEK_DRAM_DVFS_LIMIT_FREQ_CNT only makes sense if DVFS is enabled (e.g., MEDIATEK_DRAM_DVFS) so we should change it to depend on that instead of selecting DVFS. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib81e4e48e863616ed1e36cd5c0000f4e2cfb5456 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09soc/mediatek/common: add mt6359p vcore supportJames Lo
Add mt6359p vcore set/get support. To adjust frequency of little core, we need to adjust voltage of vcore. Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: Ibf49390ba78870b834c6d0b64e3f0f30f3494f18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-09mb/google/cherry: select mmc storage configWenbin Mei
Select mmc storage config for cherry. BUG=b:195274787 TEST=emerge-cherry coreboot BRANCH=cherry Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I67c8795b6e6fc121e8fe61c40da05593faa02d94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-06soc/mediatek/mt8192: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values could be showed for debugging. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I39a4391c1d1e832d77b709f8f899bb1c6dcacd69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-04soc/mediatek/mt8195: Add devapc basic driversNina Wu
Add basic devapc (device access permission control) drivers. DAPC driver is used to set up bus fabric security and data protection among hardwares. DAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DAPC driver. 1. Initialize devapc. 2. Set master domain and secure side band. 3. Set domain remap. 4. Set default permission. Change-Id: I3677657a117caed0d73526f78b0ebe8180148335 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-08-02helpers: Add GENMASK macroYu-Ping Wu
The GENMASK is defined in multiple files (with various names such as MASKBIT), which sets certain consecutive bits to 1 and leaves the others to 0. To avoid duplicate macros, add GENMASK macro to helpers.h. GENMASK(high, low) sets bits from `high` to `low` (inclusive) to 1. For example, GENMASK(39, 21) gives us the 64-bit vector 0x000000ffffe00000. Remove duplicate macro definitions. Also utilize GENMASK for _BF_MASK in mmio.h. BUG=none TEST=make tests/commonlib/bsd/helpers-test TEST=emerge-cherry coreboot BRANCH=none Change-Id: If2e7c4827d8a7d27688534593b556a72f16f0c2b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-07-21soc/mediatek/mt8195: modify mt6360 interfaceRex-BC Chen
With the new definition of mt6360_regulator_id, merge the MT6360 LDO and PMIC interfaces into one. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7ccc32cb0a9481d5f55349c152267a44fe09d20a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-21soc/mediatek/mt8195: redefine mt6360_regulator_idRex-BC Chen
On MT8195 platforms with BC1.2, we have to use EC to control MT6360 so the mt6360_regulator_id is redefined to match the numbers defined in EC driver. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9437edb9776442759ce04c31d315c3760078ffb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56434 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14soc/mediatek/mt8195: Get DRAM size from DRAM calibration resultRyan Chuang
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Ic34f29d1692b94284b2cf6c5d91d323df736c76f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56204 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12soc/mediatek/mt8195: fine tune pmif spi hardware settings for stabilityJames Lo
Update IO driving setting for pmif spi. Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I48268cda8845a591592d8ca828ffe492e6dfe0ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/56166 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-07soc/mediatek/mt8195: Add dramc_param.hRyan Chuang
The dramc_param.h defines the header version, structure and APIs for the DRAM calibration parameters stored on the flash, and should be platform independent. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: Ib8a6ea1b6cf1538854890b653d5d9a934f7f687e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-07-07soc/mediatek/mt8195: Enable DCMGarmin Chang
Enable DCM settings on the MT8195 platform. DCM means dynamic clock management, and it can dynamically slow down or gate clocks during CPU or bus idle. Change-Id: Ib431a0334c157d440d6e89dcb154241d980d97ce Signed-off-by: Garmin Chang <garmin.chang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-26soc/mediatek/mt8195: Utilize the retry macroYu-Ping Wu
Make use of the retry macro intruduced in CB:55778: helpers: Introduce retry macro (Change-Id: I421e4dcab949616bd68b3a14231da744b9f74eeb) BUG=none TEST=emerge-cherry coreboot BRANCH=none Change-Id: Ieaec95e20e5bb54fcd145007cc46f21c8b7e26d2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-06-24soc/mediatek/mt8195: Support 4 channel DRAM in DPM init flowRyan Chuang
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: If2e9d8a4dcfad28c48a2b5fa7c92f70fae879e67 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-23soc/mediatek/common: Add DPM_FOUR_CHANNEL optionRyan Chuang
Add DPM_FOUR_CHANNEL option for 4 channel configuration for DPM. Publicize reset_dpm() as dpm_reset() for external reference. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: If6e0d5c4d16a7ddd69c4a427488f8899870db327 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-23soc/mediatek/mt8195: Add DPM firmware filesRyan Chuang
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I51e8ebf5a75ac629bed51665e12bafa740b4b81d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-23soc/mediatek/mt8195: Add mt6360 driver for PMIC accessAndrew SH Cheng
Signed-off-by: Andrew SH Cheng <andrew-sh.cheng@mediatek.com> Change-Id: Ieaf234f35f2b7d440bdf1e6ec4c455af7b311623 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55710 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/mediatek/mt8195: add mt6691 driverhenryc.chen
Add mt6691 buck control for DRAM to run fast calibration test. It is needed to get and set voltage during testing. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Change-Id: I4fb9f7245d44383a6a3a0cf8d00f7f503cbdeb06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55575 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/mediatek/mt8195: add eDP supportJitao Shi
BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I37326ad053295aa4944c8291e4e7a7d69c8f3f63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55573 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16soc/mediatek/mt8195: Add ddp driver to support eDP outputjason-jh.lin
Add ddp (display controller) driver that supports overlay, read/write DMA, etc. The output goes to display interface DP_INTF0 directly. Add ddp gclast and output_clamp settings on mt8195 to support multi-layer display. BUG=b:189985956 Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Change-Id: I9d5dd1025c4766218c2b1d86b9b1f97f2eab53d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55509 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/mediatek/mt8195: Add base addresses for displayJitao Shi
Add disp_dsc/disp_merge/dp_intf/edptx base addresses. BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Change-Id: I694da1449154e5b167c10d6d43d25ee2c5c0ec36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55332 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/mediatek/mt8195: add power and power control for eDPJitao Shi
1. Add API of TVD_PLL1 mt_pll_set_tvd_pll1_freq() for setting rate. 2. Add API of TVD_PLL1 edp_mux_set_sel() for mux sel. 3. Add eDP power domain control. BUG=b:189985956 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I9e43e0ffeb7b8bcd1786a8d2f5acbf22d5ab501f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55346 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-05soc/mediatek/mt8195: fix GPIO register offsetsZhiqiang Ma
Correct the offsets by MT8195 Register Map V0.2-1 chapter: 3.2 GPIO Controller (page 3272) Control register names: PUPD_CFG0 PU_CFG0 Signed-off-by: Zhiqiang Ma <zhiqiang.ma@mediatek.com> Change-Id: I9b0f8a24756092a97933cc9d4ba13a9e79c73e91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55163 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-05soc/mediatek/mt8195: Enable mt8195 auxadcZhiqiang Ma
Enable auxadc on MediaTek mt8195 platform. Signed-off-by: Zhiqiang Ma <zhiqiang.ma@mediatek.com> Change-Id: Ie79420e20c9ed6155791b490e1b5e4b44a579a49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-04soc/mediatek/mt8195: add SPM loaderDawei Chien
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value after booting up. Change-Id: Ia0f9b9f86e44b293c1cc47213946304c64aea75e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55140 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/mediatek: Extract spm_parse_firmware to commonRex-BC Chen
spm_parse_firmware can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I54d9672aa9ee9078ec9fe3fa4f2e9fe860a50636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55139 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-03soc/mediatek: Initialize SSPMRex-BC Chen
Load SSPM firmware and boot up SSPM in ramstage. This adds 23ms to the boot time. TEST=Load SSPM blob ok, and we can see some logs of SSPM from AP. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia227ea9f7d58129068cb36ec2de7d9feb677006b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-06-01soc/mediatek: Move the SSPM driver to commonRex-BC Chen
The SSPM driver can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{asurada, kukui} coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If9779853becb298eeeabb3dc6096bc474baae202 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55050 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/mediatek/mt8195: Initialize MCUPMalex.miao
Load MCUPM firmware and boot up MCUPM in ramstage. TEST=can see MCUPM log from AP console Signed-off-by: alex.miao <alex.miao@mediatek.corp-partner.google.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I9e8c45ce7166644b94319ec2e7836d3d3c8008dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/54899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek: Move the MT8192 MCUPM driver to commonRex-BC Chen
The MPUCM drivers can be shared by MT8192 and MT8195. TEST=emerge-asurada coreboot; Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I07a66bcf5a149582f34df1cfd08b5514fc5c2eb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-26soc/mediatek/mt8195: Change fsrc source to ulposcchun-jie.chen
Set fsrc source to ulposc_d10 for 26m off low power scenario. Signed-off-by: chun-jie.chen <chun-jie.chen@mediatek.com> Change-Id: Ifb02d32820944d7cfbbf23de638e9a0e82b5e84d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54870 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18soc/mediatek/mt8195: enable ARM64_USE_ARM_TRUSTED_FIRMWAREYidi Lin
Enable ATF configuration to support multi-core. TEST=boot to kernel with multi-core support. BUG=b:177593590 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id1ef29894fa3a6022574c3874dee62617133b12c Reviewed-on: https://review.coreboot.org/c/coreboot/+/53898 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/mediatek/mt8195: Initialize DRAM in romstageRex-BC Chen
Initialize DRAM in romstage and configure to support fast calibration. Change-Id: I89b87be62c8e88ae4a620d56aa7a35e47f97952d Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54229 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-14soc/mediatek: Remove duplicate enum declarationRex-BC Chen
Remove dram_cbt_mode in dramc_soc.h. TEST=emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Idc4a3887c9cc3f77cbdd7282e2977f6df858817d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
2021-05-13soc/mediatek/mt8195: change vpp_sel default mux for 4k supportNancy.Lin
vpp_sel and ethdr_sel are vdosys clock source select mux. Steps to change to support 4K source. 1. Change vpp_sel source to mainpll_d4 to run at 546MHz 2. Change ethdr_sel source to univpll_d6 to run at 416MHz Signed-off-by: Nancy Lin <nancy.lin@mediatek.com> Change-Id: Ib6518ed6204528489c41e7161534bbd3734ac851 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54082 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: configure DMA buffer in DRAMRex-BC Chen
Set DRAM DMA to be non-cacheable to load blob correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I819d40431fc7c9e7549686736d9e70de1c1982f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54052 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/mediatek/mt8195: Enable SCP SRAMRex-BC Chen
Enable SCP SRAM to allow module in SCPSYS to access DRAM. TEST=AFE acess DRAM successfully Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I40862f8d74e5aa17361f1c91ea31a10b0a4ffb31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54014 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8192: add apusys init flowChien-Chih Tseng
Setup APU mbox's functional configuration registers. BUG=b:186369803 BRANCH=asurada TEST=boot asurada correctly Signed-off-by: Chien-Chih Tseng <chien-chih.tseng@mediatek.com> Change-Id: If05a8af1a2f96598adcf70e15003e4f5dc94e337 Signed-off-by: Flora Fu <flora.fu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48622 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8195: Enable and initialize eintYidi Lin
eint event mask register is used to mask eint wakeup source. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel eint upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. Change-Id: I703d87e3dc49cf4e0b7ff0c75a6ea80245dd73d3 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54007 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-11soc/mediatek/mt8195: Disable UFS reference clockYidi Lin
UFS reference clock (refclk) is enabled by default, which will cause the UFSHCI to hold the SPM signal and lead to suspend failure. Since UFS kernel driver is not built-in, disable refclk in coreboot stage. Change UFSHCI base register to 0x11270000. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I1386e59f802a9e3c938a7e8dbeea547fbcb02709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10soc/mediatek/mt8195: Add RTC driverYuchen Huang
Both mt8192 and mt8195 use MT659P RTC. Move mt8192/rtc.c to common folder and rename to rtc_mt6359p.c. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I73ea90512228a659657f2019249e7142c673e68e Reviewed-on: https://review.coreboot.org/c/coreboot/+/53897 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add clk_buf driverYuchen Huang
Both mt8192 and mt8195 use mt6359p clk_buf. But mt8195 clk_buf uses legacy co-clock mode without srclken_rc. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ie9ee91449a7a14e77231493f807b321b2dbaa6a6 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-10soc/mediatek/mt8195: Configure eMMC and SDCardWenbin Mei
Change-Id: I0ed82e860612e8a62f361e60d217280f775ab239 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53895 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add i2c driver supportkewei xu
TEST=write/read EEPROM on MT8195 EVB successfully Change-Id: Ia26e55512501e9758d7f5543d176730cf30ce03d Signed-off-by: kewei xu <kewei.xu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53894 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/mediatek/mt8195: Add mt6360 driver for LDO accessAndrew SH Cheng
Signed-off-by: Andrew SH Cheng <andrew-sh.cheng@mediatek.com> Change-Id: I68ca7067f76a67c4e797437593539f8f85909edc Reviewed-on: https://review.coreboot.org/c/coreboot/+/53893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-07soc/mediatek/mt8195: Turn off L2C SRAM and reconfigure as L2 cacheYidi Lin
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I8777b0c8471fe17ffffdcb6ad5b7c00fb1d35db1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52925 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05soc/mediatek/mt8192: devapc: update domain remap settingNina Wu
Update domain remap setting to prevent DSP (domain 4) from accessing registers. Change-Id: Iefa9e75db85482a6c016b8b423c0b05f97e585b1 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add mtcmos init supportWeiyi Lu
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: If7cd1f596f1406fa21d6586510e9956bb9846a6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the power domain data under each SoCWeiyi Lu
In follow-up patches, we need to set multiple power domains to power on the display and audio on MT8195. Move the power domain data under each SoC and make power_on() API to support multiple settings. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I8c3d19f1e9a4e516d674d68989ad509f37e5b593 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add NOR-Flash supportRex-BC Chen
TEST=boot to romstage on MT8195 EVB Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I450281fb4b1750e59cb76f6b2083f0e2889fd4cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: Add SPI driver supportQii Wang
Add SPI controller driver code. Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I674763cdb0f338e123c121ede52278cfe96df091 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek: Move the common part of SPI drivers to common/Rex-BC Chen
The SPI drivers can be shared by MT8183, MT8192 and MT8195. TEST=emerge-{oak, kukui, asurada, cherry} coreboot; verified on Cherry P0 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7bb7809a88fbda67eca67ecfde45b9cb5f09dffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-05-05soc/mediatek/mt8195: add pmif/spmi/pmic driverRex-BC Chen
MT8195 also uses mt6359p so we can reuse most drivers. The only differences are IO configuaration, clock setting, and PMIC internal setting related to soc. Reference datasheet: MT6315 datasheet v1.4.2.pdf, RH-D-2019-0616. Reference datasheet: MT6359_PMIC_Data_Sheet_V1.5.docx, RH-D-2018-0205. Change-Id: I73f9c9bf92837f262c15758f16dacf52261dd3a3 Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-30soc/mediatek/mt8192: devapc: Add ADSP domain settingTinghan Shen
Configure ADSP domain from 0 to 4 and lock it to prevent changing it unexpectedly. TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Ib938ba05e8d0342572c57366c97ebb0185da8aba Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52728 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-28soc/mediatek/mt8195: Add PLL and clock init supportWeiyi Lu
Add PLL and clock init code. Add frequency meter and API for raising little CPU/CCI frequency. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I8ded0236d10826687f080bd5a213feb55d4bae03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52667 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-28soc/mediatek: Move the common part of PMIC drivers to common/Yidi Lin
The PMIC drivers can be shared by MT8192 and MT8195. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ie17e01d25405b1e5119d9c70c5f7afb915daf80b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-26soc/mediatek/mt8195: Add GPIO driverPo Xu
Signed-off-by: Po Xu <jg_poxu@mediatek.corp-partner.google.com> Change-Id: Ica1b1c80a851075599442298bb6675caf5c72f57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-26soc/mediatek/mt8195: Add timer supportYidi Lin
TEST=emerge-{oak, kukui, asurada, cherry} coreboot; verified on Asurada and Cherry P0 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ic6a87e7d5983bf14ad123de82ed670a22a7be1aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/52541 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26soc/mediatek/mt8192: Remove redundant SPM register definitionYidi Lin
A complete SPM register definition is defined in include/soc/spm.h. Remove the redundant definition from include/soc/pmif_spmi.h. TEST=emerge-asurada coreboot BRANCH=asurada Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: If55e7adabdf32bb4312b910dce9a55621a8da380 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-26soc/mediatek/mt8195: add register definitionsYidi Lin
Add register definitions for infracfg_ao, topckgen, apmixed and SPM. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ie740f22aa12f40950a27a3e0142e2d50a506b251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-26soc/mediatek/mt8195: Initialize watchdogYidi Lin
MT8195 requires writing speical value to mode register to clear status register. This value is invalid on other platforms. We can do this safely in the common watchdog driver. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Iba5b41f426fc38719bb343a220e0724bff229c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-21soc/mediatek: Move mt8192 ufs driver to commonYidi Lin
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I28eb13edcded95a9a4c17bdf92da9f792883a613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-21src/mediatek: Move mt8192 eint driver to commonYidi Lin
The eint driver can be shared by multiple platforms so we want to move it to common/. BRANCH=asurada TEST=emerge-asurada coreboot Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Id8e0b631d5079e51213831ed17aa540e0afadd4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-16soc/mediatek: Remove misleading memory logsYu-Ping Wu
When MRC cache region type is not found (for example, in recovery mode with !HAS_RECOVERY_MRC_CACHE), mrc_cache_stash_data() will return 0. Therefore, the platform code is not able to tell from the return value if the MRC cache data is actually written to flash or not. Since the MRC driver is already pretty verbose, ignore the return value and remove the misleading memory logs. BUG=none TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: I6b411664ca91b9be2d4518a09e9734d26db02d6e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52361 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/mediatek: Include sdram_info in ddr_base_infoYu-Ping Wu
Sync dramc_param.h with private repo mtk-dramk (CL:*3751861). BUG=none TEST=emerge-asurada coreboot TEST=Hayato boots with fast calibration BRANCH=asurada Change-Id: I79541f66ce68a75147c22b83a456e6268ca1485e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-04-13soc/mediatek/mt8195: Add a stub implementation of the MT8195 SoCYidi Lin
TEST=boot from SPI-NOR and show console message at bootblock stage. Change-Id: Ia93430006096b7410393ab31fee4ea40598d0b34 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-09mb/google/asurada: select mmc storage configWenbin Mei
Select mmc storage config for asurada. Build MTK host mmc driver. BUG=b:177389446 TEST=emerge-asurada coreboot BRANCH=asurada Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: Iac656d57c2b834d1ce393fd991275b897e597b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-09soc/mediatek: add new driver 'msdc' for eMMCWenbin Mei
Add MTK host mmc driver support. MTK host controller supports eMMC5.1 spec. BUG=b:177389446 TEST=emerge-asurada coreboot BRANCH=asurada Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I54a7749ed167c00cd631a76af7c67c654c7bc725 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-04-08soc/mediatek: dsi: fine tune the delta time for EoTpJitao Shi
We seperate the EoTp packet extra data. So need to reduce the delta. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I0666068cfb04b78eb706278814163f050da32b9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/51432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-27soc/mediatek: Adjust hsa, hbp, hfp packets for MIPI_DSI_MODE_LINE_ENDJitao Shi
ANX7625 requires the line packets to end at the same time. Otherwise, the display will be shifted. BUG=b:173603645 BRANCH=kukui TEST=Display is normal on Jacuzzi Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I5949de1a9a1947fa188233787166a478b1de68b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-24soc/mediatek: Use MRC cache API for asuradaYu-Ping Wu
Use the MRC cache API for asurada, and sync dramc_param.h with dram blob (CL:*3674585). With this change, the checksum, originally stored in flash, is replaced with a hash in TPM. In addition, in recovery boot, full calibration will always ne performed, and the cached calibration data will be cleared from flash. This change increases ROMSTAGE size from 236K to 264K. Most of the increase is caused by TPM-related functions. Add new API mtk_dram_init() to emi.h, so that 'dramc_parameter' can be moved to soc folder. With this CL, there is no significant change in boot time. Normal AP reboot time (fast calibration) is consistently 0.98s as before, so this change should not affect the result of platform_BootPerf. BUG=b:170687062 TEST=emerge-asurada coreboot TEST=Hayato boots with both full and fast calibration BRANCH=none Cq-Depend: chrome-internal:3674585, chrome-internal:3704751 Change-Id: Ief942048ce530433a57e8205d3a68ad56235b427 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-24soc/mediatek/mt8192: Enlarge ROMSTAGE to 272KYu-Ping Wu
Enlarge ROMSTAGE from 256K to 272K for the upcoming change of MRC cache (CB:51620). To have more compact space usage, reduce BOOTBLOCK size from 64K to 60K (only 44K needed), and move starting address of DRAM blob (DRAM_INIT_CODE) to 0x210000 (64K-aligned). BUG=b:170687062 TEST=emerge-asurada coreboot TEST=Hayato boots BRANCH=asurada Cq-Depend: chrome-internal:3704751 Change-Id: I7aaf9faf048e0adcb3a7d856d40891762c9a6604 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-22soc/mediatek/mt8192: devapc: Add SCP domain settingTinghan Shen
Configure SCP domain from 0 to 3 and lock it to prevent changing it unexpectedly. BUG=b:163300760 TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Idccb001f0cf58492f7f1655203106470637b9b82 Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-17vendorcode/mt8192: devapc: fix register offset for PCIe domainNina Wu
Correct the wrong offset for setting PCIe domain. Change-Id: I9de2bdf5a0a4fb5b34985b11976fd50b397e97ba Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51512 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16cbfs: Remove prog_locate() for stages and rmodulesJulius Werner
This patch removes the prog_locate() step for stages and rmodules. Instead, the stage and rmodule loading functions will now perform the locate step directly together with the actual loading. The long-term goal of this is to eliminate prog_locate() (and the rdev member in struct prog that it fills) completely in order to make CBFS verification code safer and its security guarantees easier to follow. prog_locate() is the main remaining use case where a raw rdev of CBFS file data "leaks" out of cbfs.c into other code, and that other code needs to manually make sure that the contents of the rdev get verified during loading. By eliminating this step and moving all code that directly deals with file data into cbfs.c, we can concentrate the code that needs to worry about file data hashing (and needs access to cbfs_private.h APIs) into one file, making it easier to keep track of and reason about. This patch is the first step of this move, later patches will do the same for SELFs and other program types. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16soc/mediatek/mt8192: adjust i2c "tLOW" and "tSU,STO"Daolong Zhu
The i2c actiming with the default reg setting cannot meet spec, so we need to set some regs. 1. adjust the ratio of SCL high and low level, to adjust "tLOW". 2. modify ext_conf reg to adjust "tSU,STO". BUG=b:179000159 TEST=Test on asurada (MT8192), boot pass, timing pass. Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Change-Id: Ifbe97edbc38972af5b782fb93342ee0616127dd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51024 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15soc/mediatek/mt8192: devapc: Add domain remap settingNina Wu
MT8192 devapc supports remapping domains. There may be different domain bit for different subsys. For example, domain bit in INFRA is 4-bit, while in MMSYS, domain bit is 2-bit. For INFRA master to access MM registers, the domain bit will change from 4 to 2 and need to be remapped. In this patch we have remapped: 1. TINYSYS (3-bit to 4-bit) - domain 3 to domain 3 - others to domain 15 2. MMSYS slave (4-bit to 2-bit) - domain X to domain X, for X = 0 ~ 3 - others to domain 0 Change-Id: Id10a4c0bdf141cc76a386159896c861d0dc302aa Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-03-15mb/google/asurada: revise PMIC and RTC initializationYidi Lin
Move the initialization from bootblock to romstage for following reasons: - Follow MT8183 initialization sequence. - PMIC and RTC functions are only called after verstage. - Reduce bootblock size. - PMIC initialization setting is complex and may need to be changed by an RW firmware update. TEST=boot to kernel successfully Change-Id: I3e4c3f918639590ffc73076450235771d06aae91 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xi Chen <xixi.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-10soc/mediatek/mt8192: mt6315: revise initial settingHsin-Hsiung Wang
Remove unused boot status settings. Reset the power-off sequence to zero to meet hardware requirement. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ie9d39be532ec378bd6df6bf1b93307dae4068fc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51246 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/mediatek/mt8192: mt6315: update initial flowHsin-Hsiung Wang
We saw EXT_PMIC_EN1 and PPVAR_DVDD_PROC_BC power off sequence failure, and after checking MT6315 MT6315 PMIC protection key summary.xlsx and MT6315 Top and CLK programming guide.docx, we found there are something wrong about the sequence of magic key protection flow and clk setting. Update correct initial flow. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: I1b7f970a44904fda09a97f4064eef7c95feefad7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51245 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-10soc/mediatek/mt8192: mt6315: update correct slave idHsin-Hsiung Wang
The initial settings for MT6315 were not applied correctly because the setup process didn't specify correct slave id (incorrectly always sending 0), and may cause failure in power off sequence. BUG=b:179000151 BRANCH=none TEST=boot asurada correctly Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ifd04da8ac55bcc9f9fdbc088d430522c2725ad47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08soc/mediatek/mt8192: Increase PRERAM_CBMEM_CONSOLE to 400KYu-Ping Wu
Move PRERAM_CBMEM_CONSOLE to SRAM L2C and increase its size from 15K to 400K. With this change, most part of the DRAM full calibration log can be stored in CBMEM console. BUG=b:181933863 TEST=emerge-asurada coreboot TEST=Hayato boots BRANCH=none Change-Id: I896884d298e197149f75865e9d00579124a34404 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08soc/mediatek/mt8173,mt8183: revise SOC DRAM implementationXi Chen
Many header files and helper macros have been moved to the common folder and we want to use them in mt8173/mt8183 DRAM calibration code. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: Ifa483dcfffe0e1383cb46811563c90f0ab484d5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/51224 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08soc/mediatek/mt8192: initialize DRAM using vendor reference codeHuayang Duan
Mediatek has released the reference implementation for DRAM initialization in vendorcode/mediatek/mt8192/dramc (CB:50294) so we want to use it to replace the derived calibration code in soc folder. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I2b2f41d774c6b85f106867144fb0b29a4a1bdfcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/51125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-03-08soc/mediatek/common: Move DRAM implementation from mt8192 to commonXi Chen
To reduce duplicated dram sources on seperate SOCs, add dpm, dram_init, dramc_params, memory(fast-k or full-k) implementations, also add dramc log level macro header files. Signed-off-by: Xi Chen <xixi.chen@mediatek.com> Change-Id: I557c96b3d09828472b8b6f932b0192a90894043e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-25mb/google/asurada: Enable RTC for event logYu-Ping Wu
BUG=b:177399759 TEST=firmware_EventLog passed on asurada BRANCH=none Change-Id: I759f9030f525fa9e34ed542198a9dba8f25909f5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-19memlayout: Store region sizes as separate symbolsJulius Werner
This patch changes the memlayout macro infrastructure so that the size of a region "xxx" (i.e. the distance between the symbols _xxx and _exxx) is stored in a separate _xxx_size symbol. This has the advantage that region sizes can be used inside static initializers, and also saves an extra subtraction at runtime. Since linker symbols can only be treated as addresses (not as raw integers) by C, retain the REGION_SIZE() accessor macro to hide the necessary typecast. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ifd89708ca9bd3937d0db7308959231106a6aa373 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-02-16soc/mediatek: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: I7706ffe6f82e3ae2c61cacbea12d94aca48757d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-15soc/mediatek: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: If025d4c0b2ba9868d8df699fcddfcec349cdc0ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50529 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-05soc/mediatek/mt8192: Use LZ4 compression for MCUsYu-Ping Wu
For MT8192 MCUs, replace LZMA compression with LZ4 to speed up boot process. The loading (plus decompression) time of mcupm.bin and sspm.bin is consistently reduced by 8ms, respectively. BUG=b:177389446 TEST=emerge-asurada coreboot TEST=Hayato booted up BRANCH=none Change-Id: Ida35e7f6e0572ad43082e53bcc69bc708cf7da44 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-02-04soc/mediatek/mt8192/spm.c: Add missing <string.h>Elyes HAOUAS
Change-Id: I56a4e0fb42c881026f4ee1abe30f9b356af6a68f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50168 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 23:29:55 +0000