summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/common
AgeCommit message (Collapse)Author
2024-09-20soc/mediatek/common: Correct eMMC src clk frequency to 400 MHzkiwi liu
Mediatek SoCs start operating at eMMC clock around 3MHz right after power-on due to wrong src_hz value. In JEDEC spec, eMMC clock needs under 400kHz. When we need to set a clock output frequency, we actually set a frequency division value. Originally, we set the source clock frequency to 50MHz, the target frequency to 400KHz, and get the division value 128. However, the actual source clock frequency is 400MHz, so the final actual output is 400MHz/128=3.125MHz. So we correct source clock frequency to 400MHz for eMMC output clock of 400KHz. BUG=b:356578805 TEST=test boot ok; measure eMMC clock ok; no boot time impact Change-Id: I9c8836b23fb21e9b0bdc80fbe85142ea0fa5e381 Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.corp-partner.google.com> Signed-off-by: Kiwi Liu <kiwi.liu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84298 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-09-12soc/mediatek: Remove redundant struct pad_func and PAD_* definitionsYidi Lin
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch also refactors the PAD_* macros by, - Repurposing PAD_FUNC and dropping PAD_FUNC_SEL. - Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit initialization. BUG=none TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-09soc/mediatek/common: Move common GPIO definitions to gpio_defs.hYidi Lin
BUG=none TEST=emerge-{asurada, cherry, corsola, geralt, rauru} coreboot Change-Id: If35dcc4d88732f92c7c43a5eed0478ec52cf1802 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84221 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02soc/mediatek: Add mtk_pcie_deassert_perst for early PCIe resetYidi Lin
Even we assert PRSET# early to save the delay between PERST# assertion and de-assertion. MediaTek PCIe driver still takes 47ms waiting for PCIe link up. (1ms delay for each try) ``` [INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries) ``` Refactor common/pcie.c and add mtk_pcie_deassert_perst for early PCIe reset. So we can de-assert PERST# at early stage to improve the boot time. BUG=b:361728592 TEST=emerge-cherry coreboot Change-Id: I008e95263bfaf0119353382c2d2ce5ce29c6a382 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84117 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-02soc/mediatek: Add EARLY_INIT_PCIE_RESET to early_init_typeYidi Lin
Add EARLY_INIT_PCIE_RESET for early PERST# de-assertion. BUG=b:361728592 TEST=emerge-cherry coreboot Change-Id: I7ab85694e85a4c3f77fefc22efe16734c347a716 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-02soc/mediatek/common: Move mtk_pcie_reset to common/pcie.cYidi Lin
mtk_pcie_reset can be shared with MT8196. So move it to common/pcie.c. BUG=b:361728592 TEST=emerge-cherry coreboot Change-Id: Ib540cf9cc568206a1e78306624f4df7c5631c128 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-09-02soc/mediatek/common/pcie: Use clr/setbits32pYidi Lin
Use clr/setbits32p to make code cleaner. BUG=none TEST=emerge-cherry coreboot Change-Id: Id99d5aafdf4d687dbe3a0bef29b148537cf58dd8 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-02soc/mediatek/common/pcie: Add DEVTREE_CONST qualifierYidi Lin
Currently pcie.c is built into ramstage only, where DEVTREE_CONST is an empty macro, so there's no problem with that. However, if we would like to include that file in pre-ramstage, then DEVTREE_CONST would be 'const', leading to the following build error: ``` src/soc/mediatek/common/pcie.c:104:26: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] 104 | root_dev = pcidev_path_on_root(devfn); | ^ ``` BUG=none TEST=emerge-cherry coreboot Change-Id: Ia7c95424019ec0dca50bbc6be7f81b6180d06d6e Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84113 Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-24soc/mediatek: Refactor MMU operation for L2C SRAM and DMAJarried Lin
Refactor mmu operation by - moving mtk_soc_disable_l2c_sram to l2c_ops.c - keeping mtk_soc_after_dram in mmu_cmops.c Change-Id: I14bd8a82e0b5f8f00ce2b52e5aee918e130912d4 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83937 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24soc/mediatek: Move SNFC pad_func into MediaTek common directoryJarried Lin
To reduce duplicate pad_func of MediaTek SoCs, move the pad_fun to a common directory. TEST=Build pass BUG=b:317009620 Change-Id: I145233ef887a38251e8fc129b8357f236c5f7a2b Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-08-23soc/mediatek/common: Move GPIO definition to the common directoryJarried Lin
To reduce duplicate gpio_base.h in each SoC folder, move gpio_base.h to mediatek/common folder. TEST=Build pass BUG=b:317009620 Change-Id: I815df8a3083cf04b821165ec834ca98ee71a0c78 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-23soc/mediatek/common: Print error if GPIO raw_id is not in the rangeJarried Lin
TEST=build pass BUG=317009620 Change-Id: I5dffdb9f3e4e7e0d49209e6012893cd246948ee8 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83987 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-08-10soc/mediatek/common: Refactor EINT driverYidi Lin
Refactor EINT driver by - Move `pos_bit_calc_for_eint` to `common/gpio_eint_v1.c` and rename to `gpio_calc_eint_pos_bit`. - Implement `gpio_get_eint_reg` to obtain EINT base address. This change is prepared for the driver change in MT8196. BUG=b:334723688 TEST=EINT works on Geralt Change-Id: Ie53abc23971bfa39250ebd7dd48e28d6b91c5973 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83703 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-22soc/mediatek: Move memmory macros into MediaTek common directoryJarried Lin
To reduce duplicate memmory macros of MediaTek SoCs, move the header file to a common directory. TEST=Build geralt pass BUG=b:317009620 Change-Id: Iea4add8fe3735085c13438a2e177bec177913191 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83571 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-22soc/mediatek: Move symbols.h into MediaTek common directoryJarried Lin
To reduce duplicate region declarations of MediaTek SoCs, move the header file to a common directory. BUG=b:317009620 TEST=Build geralt pass. Change-Id: Iad1c9f520cdc5c6ad2b55e8f4ec6149fa47b17b1 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83570 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04soc/mediatek/common: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I50e874790dedcb6bf3b3ac8368821f22611aa3b7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82894 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <string.h>Elyes Haouas
Change-Id: I9ed1a82fcd3fc29124ddc406592bd45dc84d4628 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-29tree: Use <stdio.h> for snprintfElyes Haouas
<stdio.h> header is used for input/output operations (such as printf, scanf, fopen, etc.). Although some input/output functions can manipulate strings, they do not need to directly include <string.h> because they are declared independently. Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-03mb/google/corsola: Initialize USB port 0Wentao Qin
The default MT8186 platform is to initialize USB3 port 1. Use option bit 27 in fw_config to enable initialization of USB2 port 0 to support devices mounted on it. BUG=b:335124437 TEST=boot to OS from USB-A boot to OS from SD Card BRANCH=corsola Change-Id: I725b80593f5fc498a204bf47f943c36ccbd78134 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82089 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-12tree: Drop duplicated <device/{path,resource}.h>Elyes Haouas
<device/device.h> is supposed to provide <device/{path,resource}.h> Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-11tree: Drop unused <stdlib.h>Elyes Haouas
Change-Id: Ie7e36cfa5a09d94bb58f12f9bd262255a630424c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81819 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-09tree: Drop unused <console/console.h>Elyes Haouas
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-09soc/mediatek/common/include/soc: Include header file for check_memberRuihai Zhou
To fix the build error below when include i2c_common.h, we should include the necessary header for check_member. """ src/soc/mediatek/common/include/soc/i2c_common.h:24:42: error: expected ')' before numeric constant 24 | check_member(mt_i2c_dma_regs, dma_tx_len, 0x24); | ^~~~~ | ) """ TEST=abuild -t google/geralt -b ciri -a Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I266571686e452e2b7514afee42ff0a48f8891831 Reviewed-on: https://review.coreboot.org/c/coreboot/+/81684 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-28soc/mediatek: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: I0ce2b61329efede1ba8a02446610e3eb635ceedc Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81462 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-15treewide: Move stdlib.h to commonlibMaximilian Brune
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since all code is BSD licensed anyway. It also moves some code from libpayloads stdlib.h to commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is useful for a subsequent commit that adds devicetree.c into commonlib. Also we don't support DMA on arm platforms in coreboot (only libpayload) therefore `dma_malloc()` has been removed and `dma_coherent()` has been moved to architecture specific functions. Any architecture that tries to use `dma_coherent()` now will get a compile time error. In order to not break current platforms like mb/google/herobrine which make use of the commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a stub has been added to arch/arm64/dma.c. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-02-26soc/mediatek: Add `MEDIATEK_DRAM_ADAPTIVE` config to support dram adaptiveYidi Lin
Starting from MT8195, MediaTek platform supports "dram adaptive" to automatically detect dram information, including channel, rank, die size..., and can automatically configure EMI settings. So we can just pass a placeholder param blob to `mt_mem_init_run` by enabling this option. Platforms (MT8173, MT8183, MT8192) which do not support "dram adaptive" need to implement `get_sdram_config` to get onboard DRAM configuration info. TEST=emerge-geralt coreboot && emerge-asurada coreboot TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is set to y on geralt TEST=CONFIG_MEDIATEK_DRAM_ADAPTIVE is no set on asurada Change-Id: I05a01b1ab13fbf19b2a908c48a540a5c2e1ccbdc Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-02-18soc: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ie7bc4f3ae00bb9601001dbb71e7c3c84fd4f759a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80596 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-02lib: Move IP checksum to commonlibJulius Werner
This patch moves the IP checksum algorithm into commonlib to prepare for it being shared with libpayload. The current implementation is ancient and pretty hard to read (and does some unnecessary questionable things like the type-punning stuff which leads to suboptimal code generation), so this reimplements it from scratch (that also helps with the licensing). This algorithm is prepared to take in a pre-calculated "wide" checksum in a machine-register-sized data type which is then narrowed down to 16 bits (see RFC 1071 for why that's valid). This isn't used yet (and the code will get optimized out), but will be used later in this patch series for architecture-specific optimization. Change-Id: Ic04c714c00439a17fc04a8a6e730cc2aa19b8e68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80251 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-01-17soc/mediatek: Add EARLY_MMU_INIT kconfig optionYidi Lin
Accessing RAM before mmu initialized is time consuming. During mmu initialization, `mmu_init()` and `mmu_config_range()` write logs to the console buffer and contribue the extra boot time. This patch adds a kconfig option to move `mtk_mmu_init()` to `bootblock_soc_early_init()`. When `EARLY_MMU_INIT` is enabled, mmu is initialized before `console_init()` ready. So `mmu_init()` and `mmu_config_range()` won't write logs to the console buffer and save the boot time. It saves about 65ms on Geralt with EARLY_MMU_INIT enabled. Before: 0:1st timestamp 239,841 (0) 11:start of bootblock 239,920 (79) 12:end of bootblock 323,191 (83,271) After: 0:1st timestamp 239,804 (0) 11:start of bootblock 239,884 (80) 12:end of bootblock 258,846 (18,962) BUG=b:320381143 TEST=check timestamps in cbmem Change-Id: I7f4c3c6c836f7276119698c6de362794cf4222a6 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-01-10mb/google/cherry: Use common mtk_display_init()Yidi Lin
TEST=check FW screen on dojo Change-Id: Ie870899226588ac2a2e80f77e434455f4913d387 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-01-10mb/google/corsola: Use common mtk_display_init()Yidi Lin
TEST=check FW screen on Steelix, Tentacruel and Starmie Change-Id: I429218d59389a6ab86b522dd597c07fa5b8ea821 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79777 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-10soc/mediatek: Add common implementation to configure displayYidi Lin
The sequences of configure_display() are similar on MediaTek platforms. The sequences usually involve following steps: 1. Setup mtcmos for display hardware block. - mtcmos_display_power_on() - mtcmos_protect_display_bus() 2. Configure backlight pins 3. Power on the panel - It also powers on the bridge in MIPI DSI to eDP case. 4. General initialization for DDP(display data path) 5. Initialize eDP/MIPI DSI accordingly, - For eDP path, it calls mtk_edp_init() to get edid from the panel and initializes eDP driver. - For MIPI DSI path, the edid is retrieved either from the bridge or from CBFS (the serializable data), and then initializes DSI driver. 6. Set framebuffer bits per pixel 7. Setup DDP mode 8. Setup panel orientation This patch extracts geralt/display.c to mediatek/common/display.c and refactors `struct panel_description` to generalize the display init sequences. configure_display() is also renamed to mtk_display_init(). TEST=check FW screen on geralt. Change-Id: I403bba8a826de5f3fb2ea96a5403725ff194164f Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79776 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-09soc/mediatek: PCI: Fix translation windowJianjun Wang
Dojo fails to boot from NVMe with CONFIG_RESOURCE_ALLOCATION_TOP_DOWN enabled. The root cause is using __fls() will get a smaller value when the size is not a power of 2, for example, __fls(0x3000000) = 25. Hence the PCIe translation window size is set to 0x2000000. Accessing addresses higher than 0x2300000 will fail. Fix translation window by splitting the MMIO space to multiple tables if its size is not a power of 2. Resolves: https://ticket.coreboot.org/issues/508. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, it can boot with and without the CONFIG_RESOURCE_ALLOCATION_TOP_DOWN option. BUS=b:298255933 BRANCH=cherry Change-Id: I42b0f0bf9222d284dee0c29f1a6ed6366d6e6689 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78044 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-22soc/mediatek: Move common devapc definitions to common/Nina Wu
Move following definitions to common/ 1) the definition of the bit fields for domain remap 2) the definition of the structure for the permission of all domains Change-Id: Iac84ebc908ae384a6280388af4120f6349a32ed4 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77860 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-14soc/mediatek/common/dsi: Add actual values to the log messagesRuihai Zhou
Per the suggestion in CB:76218, print actual values to the error messages, which may be helpful for debugging. Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Id3a7a8c76b6ad15e7cf71225d8529f3e034935ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/76442 Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-07-10mb/google/corsola: Add support for AW37503 Power ICRuihai Zhou
The AW37503 is designed to supply positive/negative supply for driving the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we need to program the registers at boot. We program the target positive/negative output voltage via I2C and enable the power rails by pulling up ENP and ENN pins. On Starmie, we need +/-6V power supply for the MIPI panel. We program the AW37503 registers in coreboot so that kernel can control AW37503 via fixed regulators without additional settings(what we did for TPS65132). Since we distinguish AW37503 and TPS65132 by reading the vendor ID, we need to initialize I2C bus as early as possible. Therefore, we move mtk_i2c_bus_init() to mainboard_init(). BUG=b:289482828 TEST=emerge-staryu coreboot chromeos-bootimage TEST=Test the sequence the voltage Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8 Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/mediatek: Enable DRAM scramble on fast calibration flowXi Chen
No matter what DRAM calibration is performed, DRAM scramble should be enabled as long as MEDIATEK_DRAM_SCRAMBLE is set to y. Currently, DRAM scramble is enabled only if full calibration is performed. Correct the behavior by adding DRAMC_CONFIG_SCRAMBLE to the header config in fast calibration flow. BUG=b:285474337 TEST=Check the scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I907bccd4e68e040179e1971db6bf7a57b88dec1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75818 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21soc/mediatek: Add a prompt string for MEDIATEK_DRAM_SCRAMBLEXi Chen
Make the default MEDIATEK_DRAM_SCRAMBLE value overridable by adding a prompt string. BUG=b:285474337 TEST=build pass and check scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I703ac9aa3ccc4dd9d0fef9949c6b0d49449971a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75815 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-12soc/mediatek/common: Disable DRAM scramble by defaultYidi Lin
Geralt SoC does not support 'persist certain regions' across reboots. Considering the impact of missing ramoops for debugging, set MEDIATEK_DRAM_SCRAMBLE to default n to disable this feature in production FW image. BUG=b:269049451,b:278478563 TEST=emerge-geralt coreboot and confirm CONFIG_MEDIATEK_DRAM_SCRAMBLE=n Signed-off-by: Yidi Lin <yidilin@chromium.org> Change-Id: I109634d811a928e3e6f7f56e706a5b61a52a21ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/75562 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-01soc/mediatek/common: Add support for power supply TPS65132SRuihai Zhou
The TPS65132S is designed to supply positive/negative driven application. It communicates through standard I2C compatible interface, and it intergrates a EEPROM whose contents will be loaded into the register at startup. Since TPS65132S is used in staryu and geralt projects, we move the implementation to mediatek/common. The datasheet: TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf BUG=b:282902297 TEST=boot starmie to firmware screen Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Iad2c9bdea5824455efcef18b44876111061cfa1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75488 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-24soc/mediatek/dptx.c: Remove set but unused variablesArthur Heymans
This fixes clang warning about set but unused variables. Change-Id: I3a3345e33380862d6939b61485f6d1eefa3d1815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74547 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2023-04-14soc/mediatek: Add support for regulator VIO18Cong Yang
To provide power to MIPI panel STA_HIMAX83102_J02, add support for regulator VIO18. BUG=b:272425116 TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie. Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5 Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
2023-04-10soc/mediatek/mt8186: Move GPIO driving-related functions to commonJason Chen
Move GPIO driving-related functions to common for code reuse. BUG=b:270911452 TEST=build pass Change-Id: I234a2b7ef5075313144a930332bed10ffec00c6c Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74068 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8186: Reduce GPIO code size in bootblockJason Chen
Create a new GPIO driving info table that contains only the pins used in the bootblock. The GPIO driving info table is downsized from 1480 bytes to 24 bytes. BUG=b:270911452 TEST=build pass Change-Id: I24775ba93cd74ae401747c2f5a26bbf1c8f6ac0a Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74062 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-10soc/mediatek/mt8188: Reduce lastbus configuration size by 1280 bytesYidi Lin
Original lastbus configuration consumes constant memory size by allocating 16 and 8 members arrays and the utilization is bad. Refactor the lastbus structs to save memory usage. BRANCH=none BUG=none TEST=bootblock.raw.bin size is reduced from 60328 bytes to 59048 bytes. Change-Id: I07ff9ff7c75f03219e1792b92b62814293ef43fe Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74061 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10soc/mediatek/mt8188: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. There are two versions for lastbus: Version 1 for MT8186, and version 2 for MT8188. BUG=b:263753374 TEST=build pass. Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2 Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-02soc/mediatek: Add config to control DRAM scrambleXi Chen
The DRAM scramble feature enhances DRAM data protection. When it's enabled, the written DRAM data will be scrambled and hence can prevent the data from being hacked. This feature would make debugging more difficult (for example ramoops would be lost after reset). Therefore, add a new config to allow enabling or disabling the feature from coreboot, without having to maintain two versions of the DRAM calibration blob. BUG=b:269049451 TEST=build pass and check scramble enable or disable successfully Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: Ib4279bc1cc960fae9c9f5da39f4448a5627288d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-23soc/mediatek: Add "DRAM" to Kconfig MEDIATEK_BLOB_FAST_INIT nameYu-Ping Wu
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of "BLOB" is unclear. Add "DRAM" to the name. BUG=b:204226005 TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-09mb/google/geralt: Init MT6359P only once in ramstageLiju-Clr Chen
The regulator MT6359P is needed by both firmware display and SD card. To avoid duplicate initialization in ramstage, publicize init_pmif_arb() as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would save 13 ms for boot time on Geralt. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-08soc/mediatek: Add support for regulator VM18Sen Chu
To provide power to MIPI panel BOE_TV110C9M_LL0, add support for regulator VM18. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: Ib8c3b2df1157b23b37492b1e9b1716903ea67799 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72747 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08soc/mediatek: Remove unnecessary !! for boolean variableLiju-Clr Chen
Enable is already a boolean, so the !! is not needed. BUG=None TEST=build pass. Change-Id: I25a7cec632f21a258b8364c82e25b59e55ab7453 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72869 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-01treewide: Remove duplicated include <device/pci.h>Elyes Haouas
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>. Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-16commonlib/storage: Add common eMMC functionsShelley Chen
Now that multiple platforms are trying to initialize eMMC in coreboot instead of depthcharge, lets move common functionality into commonlib instead of copying the same functionality between multiple platforms. Note for consistency, changed name of set_early_mmc_wake_status() to mmc_set_early_wake_status(). Also adding an mmc_send_cmd1() function for retrieving the Operating Conditions Register (OCR) contents. BUG=b:218406702 BRANCH=None TEST=emerge-herobrine coreboot chromeos-bootimage flash onto villager device and make sure still boots ChromeOS Change-Id: Id00535b05bbd379081712601ef10e762c1831747 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-12soc/mediatek/common/mcu.c: Use 'enum cb_err' instead of 'int'Elyes Haouas
mtk_init_mcu() function already returns enum cb_err. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I562bfbdc5c917a17ce1aa656046b69eb56dce48c Reviewed-on: https://review.coreboot.org/c/coreboot/+/68241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2023-01-10soc/mediatek/common: Reset the watchdog timer before triggering resetRunyang Chen
When the watchdog timer reaches 0, the timer value won't reset to the default value unless there is an external reset or a kick. It will result in the watchdog failing to trigger the reset signal. We kick the watchdog to reset the timer to the default value. Also, because WDT hardware needs about 94us to synchronize the registers, add a 100us delay before triggering the reset signal. BUG=b:264003005, b:264017048 BRANCH=corsola TEST= Reboot successfully with the following cmd stop daisydog sleep 60 > /dev/watchdog& Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com> Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-23soc/mediatek: Add DEVAPC_DEBUG optionYidi Lin
Add DEVAPC_DEBUG option and set this option to disabled by default. This option prevents DEVAPC log flooding during the boot process. Enable this option when we need to debug DEVAPC issues. TEST=DEVAPC log is disabled by default. Change-Id: I26bc0378b8a766c6a8cc4903d64a921c3e96b93f Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71158 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22soc/mediatek: Move dapc_init to commonYidi Lin
dapc_init flow is the same on MT8186, MT8188 and MT8195. So move this function to common/devapc.c TEST=emerge-corsola coreboot; emerge-cherry coreboot; emerge-geralt coreboot TEST=devapc log is shown as expected and the system boots to kernel Change-Id: I979c3a3721a82d40c9e2db7fbe62e14a9bbd53d8 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71137 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-13soc/mediatek/common: Use write32p()Elyes Haouas
Change-Id: I83707071fe1801322dffad7fc89afaef5617f3c7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-12-09mem_chip_info: Update to new formatJulius Werner
The original version of the mem_chip_info structure does not record rank information and does not allow precise modeling of certain DDR configurations, so it falls short on its purpose to compile all available memory information. This patch updates the format to a new layout that remedies these issues. Since the structure was introduced so recently that no firmware using it has been finalized and shipped yet, we should be able to get away with this without accounting for backwards compatibility. BRANCH=corsola Cq-Depend: chromium:3980175 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If34e6857439b6f6ab225344e5b4dd0ff11d8d42a Reviewed-on: https://review.coreboot.org/c/coreboot/+/68871 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-12-05soc/mediatek: Fix DSI register definition for MT8186Bo-Chen Chen
The DSI CMDQ offset of MT8186 is different from previous SoCs. Therefore, we define two versions for DSI register header files. The v1 is for MT8173/MT8183/MT8192 and the v2 is for MT8186/MT8188. BUG=b:244208960 TEST=build pass BRANCH=corsola Change-Id: I3d13ca03b72554ab7be2b194db32a4f961f38dad Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70183 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-23soc/mediatek: Add error handling for dptx_get_edid()Liju-Clr Chen
Skip eDP initialization when we failed to get EDID. This prevents the PLL assertion in dp_intf_config() if the display could not be initialized properly. BUG=b:233720142 TEST=boot to depthcharge on MT8188 EVB. Change-Id: I0fd672b175feb9b813c1d9ec4140e4273079ff07 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69858 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18cbmem_top_chipset: Change the return value to uintptr_tElyes Haouas
Get rid of a lot of casts. Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2022-11-04lib/coreboot_table: Rename lb_fill_pcieArthur Heymans
By convention 'fill_lb_xxx' is used. Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04lib/coreboot_table: Simplify API to set up lb_serialArthur Heymans
Instead of having callbacks into serial console code to set up the coreboot table have the coreboot table code call IP specific code to get serial information. This makes it easier to reuse the information as the return value can be used in a different context (e.g. when filling in a FDT). This also removes boilerplate code to set up lb_console entries by setting entry based on the type in struct lb_uart. Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-10-26coreboot_tables: Drop uart PCI addrArthur Heymans
Only edk2 used this to fill in a different struct but even there the entries go unused, so removing this struct element from coreboot has no side effects. Change-Id: Iadd2678c4e01d30471eac43017392d256adda341 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-10-25soc/mediatek/mt8188: Update mtcmos settings for display and audioBo-Chen Chen
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are required. - For audio, it requires powering on adsp_ao_pwr_con, adsp_infra_pwr_con and audio_pwr_con. - Add new power domain data `ext_buck_iso_bits` for buck isolation control. BUG=b:244208960 TEST=access display registers successfully. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-25soc/mediatek: Add support for input 1P mode of dp_intfRex-BC Chen
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct member `input_mode` is added to `struct mtk_dpintf` for differentiation. We also move SoC-specific data `dpintf_data` to soc folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2022-10-25soc/mediatek: Move DP drivers to commonBo-Chen Chen
DP drivers can be shared for both MT8195 and MT8188, so move them to common folder. BUG=b:244208960 TEST=emerge-cherry coreboot. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-10-21soc/mediatek: Unify PLL function namesRex-BC Chen
For consistency with the PLL function naming: - Rename edp_mux_set_sel() to mt_pll_edp_mux_set_sel(). - Rename mux_set_sel() to pll_mux_set_sel(). BUG=none TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ifc7b14bf0db5a5461037e2fbf41756d1542ca945 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68622 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for PMIC MT6315Sen Chu
On MT8186T, the big cores are powered on by MT6315 via PMIF. This patch adds the following changes. - Add MT6315 settings. - Configure PMIC PMIF for MT6315. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek: Move SPMI interface configuration to SoC folderSen Chu
The SPMI interface configuration is SoC-dependent. - MT8192 and MT8195 are the same. - MT8186 does not need to implement this. - MT8188 is different from MT8195, and we will submit another patch to fix this. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PMIF_SPMI_IOCFG_DEFAULT_SETTING Kconfig optionRex-BC Chen
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't need to configure PMIF SPMI IO pins. Add a config to control that. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add PWRAP_WITH_PMIF_SPMI Kconfig optionRex-BC Chen
On MT8186, PMIC interface supports PWRAP and PMIF_SPMI while other MediaTek SoCs support PMIF_SPMI and PMIF_SPI. BUG=b:249436110 TEST=build pass. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I20efa6d84975d781972af9143c0c7e3a272653e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68577 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-21soc/mediatek/mt8186: Add support for reading CPU IDRex-BC Chen
MT8186 has two slightly different versions: MT8186G and MT8186T (turbo version). Add get_cpu_id() to identify different CPUs. BUG=b:249436110 TEST=cpu id is correct. BRANCH=corsola Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add DEVAPC settings for ADSPTinghan Shen
Add DEVAPC permission settings for ADSP and set its domain number to 6. TEST=SOF driver is functional. BUG=b:204229221 Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-14soc/mediatek/mt8186: Add mtcmos power-on control for ADSPMandy Liu
To use SOF correctly, we need to enable power domain of ADSP. TEST=SOF driver is functional. BUG=b:204229221 Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/mediatek: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I9cf4097518034fa4c3ae1899840ae3a276936f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67581 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14timer: Change timer util functions to 64-bitRob Barnes
Since mono_time is now 64-bit, the utility functions interfacing with mono_time should also be 64-bit so precision isn't lost. Fixed build errors related to printing the now int64_t result of stopwatch_duration_[m|u]secs in various places. BUG=b:237082996 BRANCH=All TEST=Boot dewatt Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-09soc/mediatek/mt8186: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. TEST=build pass. BUG=none Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Change-Id: Iff39486dfad556a3104b2f2b6811c34c2ded6954 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-08src: De-conflict CALIBRATION_REGION definitionsMartin Roth
Change the name of the CALIBRATION_REGION definitions used in two separate locations. This conflict was causing an error for the lint-001-no-global-config-in-romstage test. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If6734f2a7d9be669586ea350fb9979fcd422b591 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-07soc/mediatek: a common implementation to register BL31 resetHung-Te Lin
The implementations of register_reset_to_bl31() are the same for MedaiTek platforms, so we extract them to soc/common/bl31.c. BUG=None TEST=build pass Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move some SPM functions to commonBo-Chen Chen
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and MT8188, so we move them to common/spm.c. TEST=build pass. BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek/mt8188: Use MHz as unit for current_clkBo-Chen Chen
The unit of current_clk in pmif_ulposc_check() should be MHz. We use pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz. Without this modification, the judgement in pmif_ulposc_check() is alway wrong due to the wrong unit. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move common DEVPAC enums and functions to commonBo-Chen Chen
Some enums and functions are the same in DEVAPC driver for MT8195, MT8186, and MT8188, so we move them to common folder. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-31soc/mediatek: Move dpm_4ch.c to commonXi Chen
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common folder. TEST=build pass BUG=b:236331724 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-27soc/mediatek: Move emi.c to common folderRex-BC Chen
The emi.c is the same for MT8186 and MT8188, so we could move it to the common folder and reuse it. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I225f1d07c973129172f01bf7f4d7f5d5abe7c02b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66328 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13soc/mediatek: Move common definition of DFD to common folderRex-BC Chen
We use the same dump address and size for DFD in all MediaTek SoCs, so we move them to dfd_common.h and rename dfd_common.h to dfd.h. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I162bbb0a82e3b55c8cfbbd20e28a54ad01fd6b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66585 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03soc/mediatek: Move common definitions to dramc_soc_common.hRex-BC Chen
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and MT8186, so we move them to dramc_soc_common.h TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Create GET_TICK_DLY_REG macro for SPI tick delay settingRex-BC Chen
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which is different from previous SoCs, so we define a macro to get the designated register. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-22mb/google/geralt: Implement regulator interfaceHui Liu
Control regulator more easily with regulator interface. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Use boolean type for "enable" argument for regulatorRex-BC Chen
Because 0 and 1 are the only possible values, 1. Change input argument "enable" of mainboard_enable_regulator to bool. 2. Change return value of mainboard_regulator_is_enabled() to bool. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek/mt8188: Add VMCH, VMC support for MT8188Hui Liu
For MT8188, we need to enable and adjust VMCH and VMC to support SD cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21soc/mediatek: Create a function to check ulposcRex-BC Chen
We will use the same drivers for checking ulposc in MT8188, so we add a new function pmif_ulposc_check() to common. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13soc/mediatek: Move SPMI device table to SoC folderHui Liu
The SPMI devices on MT8188 are different from previous SoCs, so we move them to SoC folder. We also move SoC-specific definitions to soc/pmif.h. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I666c2a8222a2bd8cd460e2225a7ae48b001da9d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65757 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-12soc/mediatek: Add mt_pll_set_usb_clock() to enable usb clockRex-BC Chen
There are clock settings for usb in mt8195 and mt8188, so we add a new function which is implemented in pll.c to do this. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40b358b197541bc5281645879553340059829db3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65750 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move FLASH_DUAL_READ to commonRex-BC Chen
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we move it to common folder and select it in SoCs' Kconfig. As suggested in CB:58837, we also rename FLASH_DUAL_READ to FLASH_DUAL_IO_READ to reduce confusion. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If267a332519412a7919c5b7817047fabe4a564c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620 Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-06soc/mediatek: Move some gpio functions to common/gpio_op.cRex-BC Chen
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd() can be reused for mt8192, mt8195 and mt8186, so move it to new file "gpio_op.c" in common folder. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 20:55:43 +0000