summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2021-08-03soc/intel/*: Allow configuring 8254 timer via CMOSSean Rhodes
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer` CMOS option to allow enabling and disabling the 8254 timer without having to rebuild and reflash coreboot. If options are not enabled or the option is missing in cmos.layout, the Kconfig setting is used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic82c7f25cdf6587de5c40f59441579cfc92ff2f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-02soc/intel/broadwell: Drop early BAR macrosAngel Pons
They are used at most once. Use the actual values and drop the macros. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9c1c3ebbbfa64a5eeea3bd5551c3d0068ac0dab2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55799 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell: Replace soc/intel/common includeAngel Pons
Broadwell now uses the Lynx Point hda_verb.c and should thus use the corresponding header as well. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9b8ca91bed67be9c6850bd51f4c81e002a0f5aef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55797 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell/pch/pch.c: Drop unused includeAngel Pons
For some reason, this change makes ramstage slightly smaller. Change-Id: I5564e06b797d787f0d1093bd9bd572d1ee7b2d54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55583 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell: Drop unused function declarationsAngel Pons
These functions are never defined. Remove the unused declarations. Change-Id: I4204265680d06bf83fc42f061fd7270ff8e3305e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55798 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell: Rename `ramstage.h`Angel Pons
This file only contains the `broadwell_run_reference_code()` function prototype (either a declaration or an inline stub definition). Rename this file to refcode.h and only include it where necessary. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I6513f45b8914a84312b27ef4860870a89fd0aab3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55582 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell: Rename `SA_DEV_ROOT`Angel Pons
For consistency with Haswell, rename this macro to `HOST_BRIDGE`. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I4319f04c67aec8df118fa539e00c7328128f0700 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55528 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02soc/intel/broadwell: Drop helper functionsAngel Pons
Done for consistency with Haswell in order to ease unification. Change-Id: I445f086cfcb65a6001ced3326fb9f25a4188b888 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55527 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-29soc/intel/elkhartlake: Update UART clock divider paramsLean Sheng Tan
As EHL UART source clock is 120MHz, update the clock divider parameters (M & N) to reflect the right value. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I30c21bc4d1ef901a318a12664b61be75c1acf23b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-07-28util/spd_tools/lp4x: Add new memory parts and generate SPDsDavid Wu
This change adds the following memory parts to LP4x global list and generates SPDs using gen_spd.go for ADL: 1. H54G46CYRBX267 2. H54G56CYRBX247 3. K4U6E3S4AB-MGCL 4. K4UBE3D4AB-MGCL BUG=b:194686484 b:194765811 TEST=build. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If85088f843ab11cc531a3975b5cac3e36b573970 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-07-28Revert "soc/intel/common/block/gpio: Add support to program VCCIO selection"Karthikeyan Ramasubramanian
This reverts commit 4c569b52f6053fc39cb07eed4a0753ade567c5b6. This has introduced a regression in mainboards using JSL SoC such that it overrides the soft straps for all the GPIOs. This in turn has led to some of the peripherals not working. BUG=None TEST=Build and boot to OS in Storo. Ensure that the regressed peripherals are working back again. Change-Id: Ibfeed1075fe28051b926ddd7ca771693dc19dae8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56613 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-28Revert "soc/intel/jasperlake: Enable support to program VCCIO selection"Karthikeyan Ramasubramanian
This reverts commit 16f2c5082c92ceb4defc252819aaeca96d801543. Change-Id: Id0f960fdeca5895afc22809ff3f0236d6dbe82f4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56614 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-28soc/intel/jsl: Add disable_external_bypass_vr configSimon Yang
This dev tree config controls the Vnn/Vcc1P05 bypass mode for Jasperlake. BUG=b:191691430 BRANCH=dedede TEST=Build fw and confirm FSP setting are set properly by log Signed-off-by: Simon Yang <simon1.yang@intel.com> Change-Id: I10bc203d3fed32ab65f325978426b7d0fca6f392 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-28soc/intel/jasperlake: add pcie modphy settingsJamie Chen
This patch adds device tree settings to control pcie modphy tuning FSP UPDs. With this patch, the pcie modphy can be tuned per board. BUG=b:192716633 BRANCH=NONE TEST=build dedede variant coreboot with fw_debug enable and check if these settings have been changed successfully on fsp debug log. Change-Id: I80a91d45f9dd8ef218846e1284fdad309313e831 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Enable support to program VCCIO selectionKarthikeyan Ramasubramanian
Jasperlake is one of the few SoCs that support programmable VCCIO selection and this support is used by Dedede mainboard. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: I54def27a499ccba7fd25cab1048fdca06dbc535f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56536 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/common/block/gpio: Add support to program VCCIO selectionKarthikeyan Ramasubramanian
Some of the Intel SoCs with more than 2 PAD configuration registers support programming VCCIO selection. Add a pad configuration macro to program VCCIO selection when the GPIO is an output pin. BUG=b:194120188 TEST=Build and boot to OS in Gallop. Ensure that the VCCIO selection is configured as expected and probing the GPIO reads the configured voltage. Change-Id: Icda33b3cc84f42ab87ca174b1fe12a5fa2184061 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56507 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26soc/intel/jasperlake: Set xHCI LFPS period sampling off timeBen Kao
Provide an option to set xHCI LFPS period sampling off time (SS_U3_LFPS_PRDC_SAMPLING_OFFTIME_CTRL in JSL EDS revision 2.0). If the option is set in the devicetree, the bits[7:4] in xHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated. The host will sample LFPS for U3 wake-up detection when suspended, but it doesn't sample LFPS at all time due to power management, the default xHCI LFPS period sampling off time is 9ms. If the xHCI LFPS period sampling off time is not 0ms, the host may miss the device-initiated U3 wake-up and causes some kind of race condition for U3 wake-up between the host and the device. BUG=b:187801363, b:191426542 TEST=build coreboot with xhci_lfps_sampling_offtime_ms and flash the image to the device. Run following command to check the bits[7:4]: iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Ben Kao <ben.kao@intel.com> Change-Id: I0e13b7f51771dc185a105c5a84a8e377ee4d7d73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-07-24soc/intel/common/block: Add space before comment delimiterSubrata Banik
Update comment section to add space before comment delimiter to follow coding style. Change-Id: I883aeaa9839fa96fd7baf0c771b394409b18ddca Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56547 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-20soc/intel/alderlake: Add support for I2C6 and I2C7Varshit B Pandya
As per the EDS revision 1.3 add support for I2C6 and I2C7. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Id918d55e48b91993af9de8381995917aef55edc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55996 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-19soc/intel/common: Rename kconfig PMC_EPOCLean Sheng Tan
Rename PMC_EPOC to SOC_INTEL_COMMON_BLOCK_PMC_EPOC to maintain common naming convention. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If8a264007bbb85a44bbdfa72115eb687c32ec36e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/alderlake: Select INTEL_GMA_OPREGION_2_1Meera Ravindranath
Alder Lake supports IGD Opregion version 2.1. BUG=b:190019970 BRANCH=None Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I95a6f3df185003a4e38faa920f867ace0b97ab2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/elkhartlake: Expose FIVR config to mainboardLean Sheng Tan
Elkhart Lake provides option to configure FIVR (Fully Integrated Voltage Regulators) via parameters in FSP-S. This CL removes fixed FIVR config values and expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ie1b0e0cc908ba69805dec7682100dfccb3b9d8b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/common/block: Drop unused `intelblocks/mp_init.h` includeSubrata Banik
Change-Id: I8621a38214686b359ee0e7cdf7e92154af3cbc81 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56381 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-17soc/intel/cannonlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I129f169e5dc394a11d8f7b07486cca4894dbec8e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/elkhartlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: Ieb8063116bee59f6f6bf1f6b0b2349ce22bd67bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2021-07-17soc/intel/jasperlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: Iefc19bc81125f422b8d4fc2f4af60622e7d28c0f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/apollolake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I00ebb9a124eb3b8b893c2b176e14773c05851c18 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/icelake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I97f4d9715f3205678acca8fcdfb1a62714dfaa53 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/skylake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I2123a081baaf6fd254fe81d64eaeee1e3248dd34 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56371 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-17soc/intel/tigerlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: I773114a703d62bf469aa74b128c697cc0924cc3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-17soc/intel/alderlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: Ib62ad6a5381d346011fbc838dcd64b095fccd67b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-17cpu/intel: Add dedicated file to grow Intel CPUIDsSubrata Banik
This patch removes all local `CPUID_` macros from SoC directories and creates a common cpu_ids.h inside include/cpu/intel/cpu_ids.h. SoC users are expected to add any new CPUID support into cpu_ids.h and include 'cpu/intel/cpu_ids.h' into respective files that look for `CPUID_` macro. Note: CPUIDs for HSW, BDW and Quark are still inside the respective directory. Change-Id: Id88e038c5d8b1ae077c822554582410de6f4a7ca Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-07-17soc/intel/xeon_sp/cpx: Align Cooper Lake CPUID as per EDSSubrata Banik
This patch removes leading zero from CPUIDs as below: 0x05065a -> 0x5065a 0x05065b -> 0x5065b Change-Id: I240a06e3b3d7e3dc080f9a9ed1539fadc982495d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-07-15soc/intel/alderlake: Add virtual GPIOs for community 1Maulik V Vaghela
Alder Lake SoC has virtual GPIOs for community 1 which was being programmed by FSP and hence was skipped by coreboot. As part of moving most of the GPIO programming to coreboot, we're skipping this programming in FSP now. TEST=Check register offset to see if programming is correct. Change-Id: I4d48553d14465df50e5aaaf27ab26c6a1b70d4cf Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55270 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-15soc/intel/tigerlake: Use `is_devfn_enabled()` for Crashlog UPDsSubrata Banik
Enable FSP Crashlog UPDs if SA_DEVFN_TMT is enabled and SOC_INTEL_CRASHLOG is selected by the SoC user. Change-Id: Ibcd0259da86c8d9853e6cc4983675ac97df46c2d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56299 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-15soc/intel/alderlake: Use `is_devfn_enabled()` for Crashlog UPDsSubrata Banik
Enable FSP Crashlog UPDs if SA_DEVFN_TMT is enabled and SOC_INTEL_CRASHLOG is selected by the SoC user. Change-Id: I0244e2a3f9c000a5c6ecdade1419aa47f51b1e80 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56298 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14src: use mca_clear_status function instead of open codingFelix Held
Change-Id: I53413b4051b79d7c2f24b1191ce877155e654400 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56259 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14soc/intel/alderlake: Add GFx Device ID 0x46a6Maulik V Vaghela
This CL adds support for new ADL graphics Device ID 0x46a6. TEST=Build and boot Adlrvp board Change-Id: I8ca875c7faf2997d207aff9e292f94a3b6311e94 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56026 Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14soc/intel/common: Use SPR for backing up data way and eviction maskSubrata Banik
This patch replaces the usage of GPR (General Purpose Registers) like ECX and EBX for backing up data way and non-eviction mask with SPR (Special Purpose Registers) EDI and ESI. Purpose of this change is to ensure the safety while developers might use ECX often while doing rdmsr/wrmsr rather than making use of EDI. TEST=Able to boot JSL and TGL platform without any hang using eNEM. Change-Id: I12e0cb7bb050e4f7b17ecf30108db335d1d82ab7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56161 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14soc/intel/skylake: Drop dead `ScanExtGfxForLegacyOpRom`Angel Pons
This devicetree option is never set and never used. Drop it. Change-Id: I9cd4733746849728b2b9f85793eace9191a97f49 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-14soc/intel/skylake: Rename `Rmt` devicetree settingAngel Pons
Rename `Rmt` to `RMT` for consistency with the UPD name. Change-Id: I905b9b65fa6c5711c6e726cc09d3cad5ba3640a1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-14soc/intel/common/block/cpu/cpulib: use mca_get_bank_count()Felix Held
Use the common mca_get_bank_count function instead of open-coding the functionality to get the MCA bank number. Also re-type the num_banks variable from signed in to unsigned int, since the number of MCA bank is always positive, and make it constant. Change-Id: I449c74629ff16057c4559d7fd3620208230560f5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56245 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14include/cpu/x86/msr: introduce IA32_MC_*(x) macrosFelix Held
When accessing the MCA MSRs, the MCA bank number gets multiplied by 4 and added to the IA32_MC0_* define to get the MSR number. Add a macro that already does this calculation to avoid open coding this repeatedly. Change-Id: I2de753b8c8ac8dcff5a94d5bba43aa13bbf94b99 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56243 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-14src: Use initial_lapicid() instead of open coding itArthur Heymans
Since initial_lapicid() returns an unsigned int, change the type of the local variables the return value gets assigned to to unsigned int as well if applicable. Also change the printk format strings for printing the variable's contents to %u where it was %d before. Change-Id: I289015b81b2a9d915c4cab9b0544fc19b85df7a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55063 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13soc/intel/alderlake: Implement WA for DDR5 DIMM modulesMeera Ravindranath
The coreboot SMBus driver requires additional changes to accomodate the DDR5 EEPROM read which has resulted in a broken code flow for boot. This CL serves as a temp WA to let FSP perform the SPD read for DDR5 and pass SPD addresses to FSP UPD array. BUG=b:180458099 TEST=Build and boot DDR5 adlrvp to OS Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I9998bfcd12b81c11fcc9f791da2a27d3c788e48a Reviewed-on: https://review.coreboot.org/c/coreboot/+/50996 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-13soc/intel/alderlake: Add (and fix) devices in IRQ tableTim Wawrzynczak
Some devices were missing from the IRQ table, and this lack of IRQ programming for the devices (although unused), was causing S0ix entry to fail. BUG=b:176858827 TEST=suspend_stress_test -c10 passes, EC observes SLP_S0IX# toggle correctly upon entry/exit from S0ix Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia7612ee008842ba2b8dcd36deb201f4f26130660 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-07-12soc/intel/alderlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 8KBSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 5KB to 8KB to fix cbmem buffer overflow issue. Test=Boot ADLRVP and check cbmem -c | grep 'CBFS: Found' lists all stages. Change-Id: I38fd74c2edd71ce9f6c08db9dacb18e553745877 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-07-12soc/intel/common/irq: Program IRQ pin in irq_program_non_pch()Tim Wawrzynczak
Previously, irq_program_non_pch() was only programming the IRQ line, but the pin is required as well. BUG=b:176858827 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I2a2823c183a3495721a912de285cddb4a9444c55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56174 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12soc/intel/alderlake: Add missing devices to pci_devs.hTim Wawrzynczak
There were some devices missing from pci_devs.h: 1) GNA 2) I2C6 and I2C7 3) UART3, UART4, UART5, UART6 4) UFS 5) GSPI4, GSPI5, GSPI6 BUG=b:176858827 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I2b9f8cceb4bd0c77fc43ef2e48190dd736a84ad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56172 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-12soc/intel/alderlake: Set max Pkg C-states to AutoV Sowmya
This patch configures max Pkg C-state to Auto which limits the max C-state to deep C-state Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Iab92eaadad3f17ed8dddc4f383d6eeaab8c9ea6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-08soc/intel/alderlake: Avoid NULL pointer deferenceJohn Zhao
Coverity detects dereference pointers req and res that are NULL when calling the pmc_send_ipc_cmd function. This change prevents NULL pointers dereference. Found-by: Coverity CID 1458077, 1458078 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I151157e7a9a90c43075f431933ac44f29fd25127 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-06arch/x86: Use ENV_X86_64 instead of _x86_64_Patrick Rudolph
Tested on Intel Sandybridge x86_64 and x86_32. Change-Id: I152483d24af0512c0ee4fbbe8931b7312e487ac6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-05soc/intel/alderlake: Add support to update the FIVR configsV Sowmya
This patch adds the supports to update the optimal FIVR configurations for external voltage rails via devicetree. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: Icf6c74bda5a167abf63938ebed6affc6b31c76f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55702 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05soc/intel/alderlake: Correct Bus and Device of Touch Host ControllerVarshit B Pandya
Correct Bus and Device for THC0 and THC1 Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I41858ea156c8258ea0e7be9e2f67fb0e24144c80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-07-02arch/x86: Add X86_CUSTOM_BOOTMEDIARaul E Rangel
In order to disable X86_TOP4G_BOOTMEDIA_MAP it requires the definition to be overridden. This makes it a little less ergonomic to use. Instead introduce the inverse option that can be selected. I chose to leave X86_TOP4G_BOOTMEDIA_MAP since it keeps the Makefiles simple. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I65bbc118bde88687a7d7749c87acf1cbdc56a269 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-07-02src: Introduce `ARCH_ALL_STAGES_X86`Angel Pons
Introduce the `ARCH_ALL_STAGES_X86` Kconfig symbol to automatically select the per-stage arch options. Subsequent commits will leverage this to allow choosing between 32-bit and 64-bit coreboot where all stages are x86. AMD Picasso and AMD Cezanne are the only exceptions to this rule: they disable `ARCH_ALL_STAGES_X86` and explicitly set the per-stage arch options accordingly. Change-Id: Ia2ddbae8c0dfb5301352d725032f6ebd370428c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-07-02soc/intel/common/block/cse: Add ME EOP timestampsTim Wawrzynczak
BUG=b:191362590 TEST=on brya, cbmem -t: 942:before sending EOP to ME 2,628,446 (5,879) 943:after sending EOP to ME 2,631,177 (2,730) Change-Id: I0376610c5cbae7df1bf1a927b3bc99b1022de4cb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-07-02soc/intel/alderlake: Add USB TCSS enablementBernardo Perez Priego
In order to detect USB Type C device port as Super Speed, we need to set corresponding bit in UPD UsbTcPortEn. This patch will use device path to determine which port should be enabled. BUG=b:184324979 Test=Boot board, USB Type C must be functional and operate at Super Speed. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I7da63f21d51889a888699540f780cb26b480c26d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01soc/intel/alderlake: Enable energy efficiency turbo modeV Sowmya
This patch enables the energy efficiency turbo mode. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I2d76c948bdc9c208f5728e305b3034fcede6f4bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/55705 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-01soc/intel: Refactor `xdci_can_enable()` functionAngel Pons
The same pattern appears on all `xdci_can_enable()` call sites. Move the logic inside the function and take the xDCI devfn as parameter. Change-Id: I94c24c10c7fc7c5b4938cffca17bdfb853c7bd59 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-01soc/intel/alderlake: Select VBOOT_X86_SHA256_ACCELERATION configSubrata Banik
By enabling the flag alderlake platform will use hardware sha instruction instead of software implementation for sha256. This will speed up firmware verification especially on low-performance device. Change-Id: Ie8ab02360fdceafab257e9a301e6a89d3a22c3ae Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30soc/intel/jasperlake: Send End-of-Post message to CSETim Wawrzynczak
This is done to ensure the CSE will not execute any pre-boot commands after it receives this command. Verified EOP and error recovery sequence from Intel doc#619830. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I36fe448ff279ba054ad5e79e71c995dc915db21e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55633 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-30soc/intel/tigerlake: Send End-of-Post message to CSETim Wawrzynczak
This is done to ensure the CSE will not execute any pre-boot commands after it receives this command. Verified EOP and error recovery sequence from Intel doc#612229 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iae6b2eac11c065749e57c5337d81ed20044fc903 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-30soc/intel/alderlake: Send End-of-Post message to CSETim Wawrzynczak
This is done to ensure the CSE will not execute any pre-boot commands after it receives this command. Verified EOP and error recovery sequence from Intel doc#627331. TEST=on brya, autotest firmware_CheckEOPState confirms ME is in post-boot state Change-Id: Iee8c29f81d5d04852ae3f16dc8a9ff0fa59f056a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-30soc/intel/common/block/cse: Add BWG error recovery to EOP failureTim Wawrzynczak
This patch adds functionality to attempt to allow booting in a secure configuration (albeit with potentially reduced functionality) when the CSE EOP message fails in any way. These steps come from the CSME BWG (13.5, 15.0, 16.), and tell the CSE to disable the MEI bus, which disables further communication from the host. This is followed by requesting the PMC to disable the MEI devices. If these steps are successful, then the boot firmware can continue to boot to the OS. Otherwise, die() is called, prefering not to boot over leaving the insecure MEI bus available. BUG=b:191362590 TEST=Set FSP UPD to disable sending EOP; called this function from a BS_PAYLOAD_LOAD, ON_ENTRY entry; observed that with just cse_mei_bus_disable() called, Linux can no longer communicate over MEI: [ 16.198759] mei_me 0000:00:16.0: wait hw ready failed [ 16.204488] mei_me 0000:00:16.0: hw_start failed ret = -62 [ 16.210804] mei_me 0000:00:16.0: H_RST is set = 0x80000031 [ 18.245909] mei_me 0000:00:16.0: wait hw ready failed [ 18.251601] mei_me 0000:00:16.0: hw_start failed ret = -62 [ 18.257785] mei_me 0000:00:16.0: reset: reached maximal consecutive.. [ 18.267622] mei_me 0000:00:16.0: reset failed ret = -19 [ 18.273580] mei_me 0000:00:16.0: link layer initialization failed. [ 18.280521] mei_me 0000:00:16.0: init hw failure. [ 18.285880] mei_me 0000:00:16.0: initialization failed. Calling both error recovery functions causes all of the slot 16 devices to fail to enumerate in the OS Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I06abf36a9d9d8a5f2afba6002dd5695dd2107db1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55675 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30soc/intel/common: Refine pmc_get_xtal_freq functionLean Sheng Tan
1. Remove 'PCH_EPOC_XTAL_FREQ(__epoc)' macro since it only be used in 1 place. 2. Transform macro into more readable C code. 3. Add additional case check to make sure the returned value is defined in the 'pch_pmc_xtal' enum. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If57a99bf8e837a6eb8f225297399b1f5363cfa85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30soc/intel/common: Move PMC EPOC related code to Intel common codeLean Sheng Tan
Move PMC EPOC related code to intel/common/block because it is generic for most Intel platforms and ADL, TGL & EHL use it. Add a kconfig 'PMC_EPOC' to guard this common EPOC code. The PMC EPOC register indicates which external crystal oscillator is connected to the PCH. This frequency is important for determining the IP clock of internal PCH devices. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib5fd3c4a648964678ee40ed0f60ca10fe7953f56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30src: Move `select ARCH_X86` to platformsAngel Pons
To generalise the choice of 32-bit or 64-bit coreboot on x86 hardware, have platforms select `ARCH_X86` directly instead of through per-stage Kconfig options, effectively reversing the dependency order. Change-Id: If15436817ba664398055e9efc6c7c656de3bf3e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-29soc/intel/tigerlake: Enable support for common IRQ blockTim Wawrzynczak
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch allows tigerlake boards to dynamically assign PCI IRQs. This means not relying on FSP defaults, which eliminates the problem of PCI IRQs interfering with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC routing. BUG=b:171580862 TEST=on delbin, grep 'IO-APIC' /proc/interrupts (compressed to fit) 0: 6 0 0 0 IO-APIC 2-edge timer 1: 0 35 0 0 IO-APIC 1-edge i8042 8: 0 0 0 0 IO-APIC 8-edge rtc0 9: 0 601 0 0 IO-APIC 9-fasteoi acpi 14: 1 0 0 0 IO-APIC 14-fasteoi INT34C5:00 20: 0 0 0 516 IO-APIC 20-fasteoi idma64.6, ttyS0 28: 0 395 0 0 IO-APIC 28-fasteoi idma64.0, i2c_design 29: 0 0 1654 0 IO-APIC 29-fasteoi idma64.1, i2c_design 30: 0 0 0 0 IO-APIC 30-fasteoi idma64.2, i2c_design 31: 0 0 0 0 IO-APIC 31-fasteoi idma64.3, i2c_design 32: 0 0 0 0 IO-APIC 32-fasteoi idma64.4, i2c_design 33: 0 0 14469 0 IO-APIC 33-fasteoi idma64.5, i2c_design 35: 0 18494 0 0 IO-APIC 35-edge cr50_spi 36: 95705 0 0 0 IO-APIC 36-fasteoi idma64.7, pxa2xx-spi 37: 0 0 1978 0 IO-APIC 37-fasteoi idma64.8, pxa2xx-spi 51: 1865 0 0 0 IO-APIC 51-fasteoi ELAN9008:00 59: 0 0 422 0 IO-APIC 59-fasteoi ELAN0000:00 116: 0 0 0 23 IO-APIC 116-fasteoi chromeos-ec abbreviated _PRT dump: Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table If (PICM) Package () {0x0002FFFF, 0x00, 0x00, 0x10}, Package () {0x0004FFFF, 0x00, 0x00, 0x11}, Package () {0x0005FFFF, 0x00, 0x00, 0x12}, Package () {0x0006FFFF, 0x00, 0x00, 0x13}, Package () {0x0007FFFF, 0x00, 0x00, 0x14}, Package () {0x0007FFFF, 0x01, 0x00, 0x15}, Package () {0x0007FFFF, 0x02, 0x00, 0x16}, Package () {0x0007FFFF, 0x03, 0x00, 0x17}, Package () {0x000DFFFF, 0x00, 0x00, 0x10}, Package () {0x000DFFFF, 0x01, 0x00, 0x11}, Package () {0x000DFFFF, 0x02, 0x00, 0x12}, Package () {0x0010FFFF, 0x00, 0x00, 0x13}, Package () {0x0010FFFF, 0x01, 0x00, 0x14}, Package () {0x0011FFFF, 0x00, 0x00, 0x18}, Package () {0x0012FFFF, 0x00, 0x00, 0x19}, Package () {0x0012FFFF, 0x01, 0x00, 0x1A}, Package () {0x0013FFFF, 0x00, 0x00, 0x1B}, Package () {0x0014FFFF, 0x00, 0x00, 0x15}, Package () {0x0015FFFF, 0x00, 0x00, 0x1C}, Package () {0x0015FFFF, 0x01, 0x00, 0x1D}, Package () {0x0015FFFF, 0x02, 0x00, 0x1E}, Package () {0x0015FFFF, 0x03, 0x00, 0x1F}, Package () {0x0016FFFF, 0x00, 0x00, 0x16}, Package () {0x0016FFFF, 0x01, 0x00, 0x17}, Package () {0x0016FFFF, 0x02, 0x00, 0x10}, Package () {0x0016FFFF, 0x03, 0x00, 0x11}, Package () {0x0017FFFF, 0x00, 0x00, 0x12}, Package () {0x0019FFFF, 0x00, 0x00, 0x20}, Package () {0x0019FFFF, 0x01, 0x00, 0x21}, Package () {0x0019FFFF, 0x02, 0x00, 0x22}, Package () {0x001CFFFF, 0x00, 0x00, 0x10}, Package () {0x001CFFFF, 0x01, 0x00, 0x11}, Package () {0x001CFFFF, 0x02, 0x00, 0x12}, Package () {0x001CFFFF, 0x03, 0x00, 0x13}, Package () {0x001DFFFF, 0x00, 0x00, 0x10}, Package () {0x001DFFFF, 0x01, 0x00, 0x11}, Package () {0x001DFFFF, 0x02, 0x00, 0x12}, Package () {0x001DFFFF, 0x03, 0x00, 0x13}, Package () {0x001EFFFF, 0x00, 0x00, 0x14}, Package () {0x001EFFFF, 0x01, 0x00, 0x15}, Package () {0x001EFFFF, 0x02, 0x00, 0x24}, Package () {0x001EFFFF, 0x03, 0x00, 0x25}, Package () {0x001FFFFF, 0x01, 0x00, 0x17}, Package () {0x001FFFFF, 0x02, 0x00, 0x14}, Package () {0x001FFFFF, 0x03, 0x00, 0x15}, Package () {0x001FFFFF, 0x00, 0x00, 0x16}, Else Package () {0x0002FFFF, 0x00, 0x00, 0x0B}, Package () {0x0004FFFF, 0x00, 0x00, 0x0A}, Package () {0x0005FFFF, 0x00, 0x00, 0x0B}, Package () {0x0006FFFF, 0x00, 0x00, 0x0B}, Package () {0x0007FFFF, 0x00, 0x00, 0x0B}, Package () {0x0007FFFF, 0x01, 0x00, 0x0B}, Package () {0x0007FFFF, 0x02, 0x00, 0x0B}, Package () {0x0007FFFF, 0x03, 0x00, 0x0B}, Package () {0x000DFFFF, 0x00, 0x00, 0x0B}, Package () {0x000DFFFF, 0x01, 0x00, 0x0A}, Package () {0x000DFFFF, 0x02, 0x00, 0x0B}, Package () {0x0010FFFF, 0x00, 0x00, 0x0B}, Package () {0x0010FFFF, 0x01, 0x00, 0x0B}, Package () {0x0014FFFF, 0x00, 0x00, 0x0B}, Package () {0x0016FFFF, 0x00, 0x00, 0x0B}, Package () {0x0016FFFF, 0x01, 0x00, 0x0B}, Package () {0x0016FFFF, 0x02, 0x00, 0x0B}, Package () {0x0016FFFF, 0x03, 0x00, 0x0A}, Package () {0x0017FFFF, 0x00, 0x00, 0x0B}, Package () {0x001CFFFF, 0x00, 0x00, 0x0B}, Package () {0x001CFFFF, 0x01, 0x00, 0x0A}, Package () {0x001CFFFF, 0x02, 0x00, 0x0B}, Package () {0x001CFFFF, 0x03, 0x00, 0x0B}, Package () {0x001DFFFF, 0x00, 0x00, 0x0B}, Package () {0x001DFFFF, 0x01, 0x00, 0x0A}, Package () {0x001DFFFF, 0x02, 0x00, 0x0B}, Package () {0x001DFFFF, 0x03, 0x00, 0x0B}, Package () {0x001EFFFF, 0x00, 0x00, 0x0B}, Package () {0x001EFFFF, 0x01, 0x00, 0x0B}, Package () {0x001FFFFF, 0x01, 0x00, 0x0B}, Package () {0x001FFFFF, 0x02, 0x00, 0x0B}, Package () {0x001FFFFF, 0x03, 0x00, 0x0B}, Package () {0x001FFFFF, 0x00, 0x00, 0x0B}, Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ieb241f2b91af52a7e2d0efe997d35732882ac463 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49409 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/alderlake: Enable support for common IRQ blockTim Wawrzynczak
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch allows ADL boards to dynamically assign PCI IRQs. This means not relying on FSP defaults, which eliminates the problem of PCI IRQs interfering with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC routing. BUG=b:176858827 TEST=brya0, grep 'IO-APIC' /proc/interrupts (compressed to fit) 0: 36 0 0 0 0 0 0 0 IO-APIC 2-edge time 1: 0 0 9 0 0 0 0 0 IO-APIC 1-edge i804 8: 0 0 0 0 0 0 0 0 IO-APIC 8-edge rtc0 9: 0 21705 0 0 0 0 0 0 IO-APIC 9-fasteoi acpi 14: 0 0 0 0 0 0 0 0 IO-APIC 14-fasteoi INTC 18: 0 0 0 0 0 0 0 0 IO-APIC 18-fasteoi inte 20: 0 0 0 0 0 0 0 394 IO-APIC 20-fasteoi idma 23: 2280 0 0 0 0 0 0 0 IO-APIC 23-fasteoi idma 26: 0 0 26 0 0 0 0 0 IO-APIC 26-fasteoi idma 27: 0 0 0 6 0 0 0 0 IO-APIC 27-fasteoi idma 28: 0 0 0 0 0 0 0 0 IO-APIC 28-fasteoi idma 29: 0 0 0 0 25784 0 0 0 IO-APIC 29-fasteoi idma 30: 0 0 0 0 0 0 0 0 IO-APIC 30-fasteoi idma 31: 0 0 0 0 0 0 226 0 IO-APIC 31-fasteoi idma 77: 0 0 0 0 0 2604 0 0 IO-APIC 77-edge cr50 100: 0 0 0 0 0 0 0 0 IO-APIC 100-fasteoi ELAN 103: 0 0 0 0 0 0 0 0 IO-APIC 103-fasteoi chro abbreviated _PRT dump: If (PICM) Package (){0x0002FFFF, 0, 0, 0x10}, Package (){0x0004FFFF, 0, 0, 0x11}, Package (){0x0005FFFF, 0, 0, 0x12}, Package (){0x0006FFFF, 0, 0, 0x13}, Package (){0x0006FFFF, 1, 0, 0x14}, Package (){0x0007FFFF, 0, 0, 0x15}, Package (){0x0007FFFF, 1, 0, 0x16}, Package (){0x0007FFFF, 2, 0, 0x17}, Package (){0x0007FFFF, 3, 0, 0x10}, Package (){0x000DFFFF, 0, 0, 0x11}, Package (){0x0012FFFF, 0, 0, 0x18}, Package (){0x0012FFFF, 1, 0, 0x19}, Package (){0x0014FFFF, 0, 0, 0x12}, Package (){0x0014FFFF, 1, 0, 0x13}, Package (){0x0015FFFF, 0, 0, 0x1A}, Package (){0x0015FFFF, 1, 0, 0x1B}, Package (){0x0015FFFF, 2, 0, 0x1C}, Package (){0x0015FFFF, 3, 0, 0x1D}, Package (){0x0016FFFF, 0, 0, 0x14}, Package (){0x0016FFFF, 1, 0, 0x15}, Package (){0x0016FFFF, 2, 0, 0x16}, Package (){0x0016FFFF, 3, 0, 0x17}, Package (){0x0017FFFF, 0, 0, 0x10}, Package (){0x0019FFFF, 0, 0, 0x1E}, Package (){0x0019FFFF, 1, 0, 0x1F}, Package (){0x0019FFFF, 2, 0, 0x20}, Package (){0x001CFFFF, 0, 0, 0x10}, Package (){0x001CFFFF, 1, 0, 0x11}, Package (){0x001CFFFF, 2, 0, 0x12}, Package (){0x001CFFFF, 3, 0, 0x13}, Package (){0x001DFFFF, 0, 0, 0x10}, Package (){0x001DFFFF, 1, 0, 0x11}, Package (){0x001DFFFF, 2, 0, 0x12}, Package (){0x001DFFFF, 3, 0, 0x13}, Package (){0x001EFFFF, 0, 0, 0x14}, Package (){0x001EFFFF, 1, 0, 0x15}, Package (){0x001EFFFF, 2, 0, 0x16}, Package (){0x001EFFFF, 3, 0, 0x17}, Package (){0x001FFFFF, 1, 0, 0x15}, Package (){0x001FFFFF, 2, 0, 0x16}, Package (){0x001FFFFF, 3, 0, 0x17}, Package (){0x001FFFFF, 0, 0, 0x14}, Else Package (){0x0002FFFF, 0, 0, 0x0B}, Package (){0x0004FFFF, 0, 0, 0x0A}, Package (){0x0005FFFF, 0, 0, 0x0B}, Package (){0x0006FFFF, 0, 0, 0x0B}, Package (){0x0006FFFF, 1, 0, 0x0B}, Package (){0x0007FFFF, 0, 0, 0x0B}, Package (){0x0007FFFF, 1, 0, 0x0B}, Package (){0x0007FFFF, 2, 0, 0x0B}, Package (){0x0007FFFF, 3, 0, 0x0B}, Package (){0x000DFFFF, 0, 0, 0x0A}, Package (){0x0014FFFF, 0, 0, 0x0B}, Package (){0x0014FFFF, 1, 0, 0x0B}, Package (){0x0016FFFF, 0, 0, 0x0B}, Package (){0x0016FFFF, 1, 0, 0x0B}, Package (){0x0016FFFF, 2, 0, 0x0B}, Package (){0x0016FFFF, 3, 0, 0x0B}, Package (){0x0017FFFF, 0, 0, 0x0B}, Package (){0x001CFFFF, 0, 0, 0x0B}, Package (){0x001CFFFF, 1, 0, 0x0A}, Package (){0x001CFFFF, 2, 0, 0x0B}, Package (){0x001CFFFF, 3, 0, 0x0B}, Package (){0x001DFFFF, 0, 0, 0x0B}, Package (){0x001DFFFF, 1, 0, 0x0A}, Package (){0x001DFFFF, 2, 0, 0x0B}, Package (){0x001DFFFF, 3, 0, 0x0B}, Package (){0x001EFFFF, 0, 0, 0x0B}, Package (){0x001EFFFF, 1, 0, 0x0B}, Package (){0x001EFFFF, 2, 0, 0x0B}, Package (){0x001EFFFF, 3, 0, 0x0B}, Package (){0x001FFFFF, 1, 0, 0x0B}, Package (){0x001FFFFF, 2, 0, 0x0B}, Package (){0x001FFFFF, 3, 0, 0x0B}, Package (){0x001FFFFF, 0, 0, 0x0B}, dmesg shows no GSI or PCI errors, TPM & touchpad IRQs still work Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1e7a708183ac4170b28da9565137fa2f5088a7eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/54683 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/cannonlake: Use new IRQ moduleTim Wawrzynczak
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch allows cannonlake boards to dynamically assign PCI IRQs. This means not relying on FSP defaults, which eliminates the problem of PCI IRQs interfering with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC routing. Also prodrive/hermes (intel/cannonlake) was the only user of uart_acpi_write_irq(), therefore use the allocated IRQ instead of the fixed IRQ number in that function to preserve behavior. BUG=b:130217151 TEST=on dratini, grep 'IO-APIC' /proc/interrupts (compressed to fit) 0: 11 0 0 0 IO-APIC 2-edge timer 1: 0 661 0 0 IO-APIC 1-edge i8042 8: 0 0 0 0 IO-APIC 8-edge rtc0 9: 0 874 0 0 IO-APIC 9-fasteoi acpi 14: 0 0 1 0 IO-APIC 14-fasteoi INT34BB:00 17: 0 10633 0 0 IO-APIC 17-fasteoi mmc1 19: 0 0 0 0 IO-APIC 19-fasteoi mmc0 22: 0 0 0 0 IO-APIC 22-fasteoi i801_smbus 26: 153738 0 0 0 IO-APIC 26-fasteoi idma64.0, i2c_designwar 27: 0 8 0 0 IO-APIC 27-fasteoi idma64.1, i2c_designwar 30: 0 0 227 0 IO-APIC 30-fasteoi i2c_designware.2 33: 0 0 0 0 IO-APIC 33-fasteoi idma64.3 35: 43107 0 0 0 IO-APIC 35-fasteoi idma64.4, pxa2xx-spi.4 36: 0 0 2039 0 IO-APIC 36-fasteoi idma64.5, pxa2xx-spi.5 45: 0 0 9451 0 IO-APIC 45-edge ELAN0000:00 85: 0 0 0 0 IO-APIC 85-fasteoi chromeos-ec 93: 0 7741 0 0 IO-APIC 93-edge cr50_spi abbreviated _PRT dump: If (PICM) Package () {0x0001FFFF, 0x00, 0x00, 0x10}, Package () {0x0001FFFF, 0x01, 0x00, 0x11}, Package () {0x0001FFFF, 0x02, 0x00, 0x12}, Package () {0x0002FFFF, 0x00, 0x00, 0x13}, Package () {0x0004FFFF, 0x00, 0x00, 0x14}, Package () {0x0005FFFF, 0x00, 0x00, 0x15}, Package () {0x0008FFFF, 0x00, 0x00, 0x16}, Package () {0x0012FFFF, 0x01, 0x00, 0x17}, Package () {0x0012FFFF, 0x02, 0x00, 0x10}, Package () {0x0012FFFF, 0x00, 0x00, 0x18}, Package () {0x0013FFFF, 0x00, 0x00, 0x19}, Package () {0x0014FFFF, 0x00, 0x00, 0x11} Package () {0x0014FFFF, 0x01, 0x00, 0x12}, Package () {0x0014FFFF, 0x02, 0x00, 0x13}, Package () {0x0014FFFF, 0x03, 0x00, 0x14}, Package () {0x0015FFFF, 0x00, 0x00, 0x1A}, Package () {0x0015FFFF, 0x01, 0x00, 0x1B}, Package () {0x0015FFFF, 0x02, 0x00, 0x1C}, Package () {0x0015FFFF, 0x03, 0x00, 0x1D}, Package () {0x0016FFFF, 0x00, 0x00, 0x15}, Package () {0x0016FFFF, 0x01, 0x00, 0x16}, Package () {0x0016FFFF, 0x02, 0x00, 0x17}, Package () {0x0016FFFF, 0x03, 0x00, 0x10}, Package () {0x0017FFFF, 0x00, 0x00, 0x11}, Package () {0x0019FFFF, 0x00, 0x00, 0x1E}, Package () {0x0019FFFF, 0x01, 0x00, 0x1F}, Package () {0x0019FFFF, 0x02, 0x00, 0x20}, Package () {0x001AFFFF, 0x00, 0x00, 0x12}, Package () {0x001CFFFF, 0x00, 0x00, 0x10}, Package () {0x001CFFFF, 0x01, 0x00, 0x11}, Package () {0x001CFFFF, 0x02, 0x00, 0x12}, Package () {0x001CFFFF, 0x03, 0x00, 0x13}, Package () {0x001DFFFF, 0x00, 0x00, 0x10}, Package () {0x001DFFFF, 0x01, 0x00, 0x11}, Package () {0x001DFFFF, 0x02, 0x00, 0x12}, Package () {0x001DFFFF, 0x03, 0x00, 0x13}, Package () {0x001EFFFF, 0x00, 0x00, 0x21}, Package () {0x001EFFFF, 0x01, 0x00, 0x22}, Package () {0x001EFFFF, 0x02, 0x00, 0x23}, Package () {0x001EFFFF, 0x03, 0x00, 0x24}, Package () {0x001FFFFF, 0x01, 0x00, 0x15}, Package () {0x001FFFFF, 0x02, 0x00, 0x16}, Package () {0x001FFFFF, 0x03, 0x00, 0x17}, Package () {0x001FFFFF, 0x00, 0x00, 0x14}, Else Package () {0x0001FFFF, 0x00, 0x00, 0x0B}, Package () {0x0001FFFF, 0x01, 0x00, 0x0A}, Package () {0x0001FFFF, 0x02, 0x00, 0x0B}, Package () {0x0002FFFF, 0x00, 0x00, 0x0B}, Package () {0x0004FFFF, 0x00, 0x00, 0x0B}, Package () {0x0005FFFF, 0x00, 0x00, 0x0B}, Package () {0x0008FFFF, 0x00, 0x00, 0x0B}, Package () {0x0012FFFF, 0x01, 0x00, 0x0B}, Package () {0x0012FFFF, 0x02, 0x00, 0x0B}, Package () {0x0014FFFF, 0x00, 0x00, 0x0A}, Package () {0x0014FFFF, 0x01, 0x00, 0x0B}, Package () {0x0014FFFF, 0x02, 0x00, 0x0B}, Package () {0x0014FFFF, 0x03, 0x00, 0x0B}, Package () {0x0016FFFF, 0x00, 0x00, 0x0B}, Package () {0x0016FFFF, 0x01, 0x00, 0x0B}, Package () {0x0016FFFF, 0x02, 0x00, 0x0B}, Package () {0x0016FFFF, 0x03, 0x00, 0x0B}, Package () {0x0017FFFF, 0x00, 0x00, 0x0A}, Package () {0x001AFFFF, 0x00, 0x00, 0x0B}, Package () {0x001CFFFF, 0x00, 0x00, 0x0B}, Package () {0x001CFFFF, 0x01, 0x00, 0x0A}, Package () {0x001CFFFF, 0x02, 0x00, 0x0B}, Package () {0x001CFFFF, 0x03, 0x00, 0x0B}, Package () {0x001DFFFF, 0x00, 0x00, 0x0B}, Package () {0x001DFFFF, 0x01, 0x00, 0x0A}, Package () {0x001DFFFF, 0x02, 0x00, 0x0B}, Package () {0x001DFFFF, 0x03, 0x00, 0x0B}, Package () {0x001FFFFF, 0x01, 0x00, 0x0B}, Package () {0x001FFFFF, 0x02, 0x00, 0x0B}, Package () {0x001FFFFF, 0x03, 0x00, 0x0B}, Package () {0x001FFFFF, 0x00, 0x00, 0x0B}, Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I914ac65470635f351d6311dc9b65e8e4d8d8ecfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/55968 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/cannonlake: Add some missing DEVFN macrosTim Wawrzynczak
BUG=b:130217151 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If535ad0bdd46d3315493155e64968d305aa34799 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55967 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/common/irq: Add function to return IRQ for PCI devfnTim Wawrzynczak
The IRQ for a single device may be required elsewhere, therefore provide get_pci_devfn_irq. BUG=b:130217151, b:171580862, b:176858827 Change-Id: Ibebd821767a2698c9e60b09eeeff3bb596359728 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55826 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/common/irq: Internally cache PCI IRQ resultsTim Wawrzynczak
The results of the PCI IRQ assignments are used in several places, so it makes for a nicer API to cache the results and provide simpler functions for the SoCs to call. BUG=b:130217151, b:171580862, b:176858827 Change-Id: Id79eae3f2360cd64f66e7f53e1d78a23cfe5e9df Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55825 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/common/irq: Add function to program north PCI IRQsTim Wawrzynczak
Because the FSP interface for PCI IRQs only includes the PCH devices, this function is the complement to that, taking the list of irq entries, and programming the PCI_INTERRUPT_LINE registers. BUG=b:130217151, b:171580862, b:176858827 TEST=boot brya with patch train, verify with `lspci -vvv` that for all the north PCI devices, their IRQ was either the one programmed by this function, or an MSI was used. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I81cf7b25f115e41deb25767669b5466b5712b177 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55817 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/common/block/irq: Add support for intel_write_pci0_PRTTim Wawrzynczak
Add a new function to fill out the data structures necessary to generate a _PRT table. BUG=b:130217151, b:171580862, b:176858827 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I21a4835890ca03bff83ed0e8791441b3af54cb62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51159 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29soc/intel/common: Add new IRQ moduleTim Wawrzynczak
The Intel FSP provides a default set of IO-APIC IRQs for PCI devices, if the DevIntConfigPtr UPD is not filled in. However, the FSP has a list of rules that the input IRQ table must conform to: 1) One entry per slot/function 2) Functions using PIRQs must use IOxAPIC IRQs 16-23 3) Single-function devices must use INTA 4) Each slot must have consistent INTx<->PIRQy mappings 5) Some functions have special interrupt pin requirements 6) PCI Express RPs must be assigned in a special way (FIXED_INT_PIN) 7) Some functions require a unique IRQ number 8) PCI functions must avoid sharing an IRQ with a GPIO pad which routes its IRQ through IO-APIC. Since the FSP has no visibility into the actual GPIOs used on the board when GpioOverride is selected, IRQ conflicts can occur between PCI devices and GPIOs. This patch gives SoC code the ability to generate a table of PCI IRQs that will meet the BWG/FSP rules and also not conflict with GPIO IRQs. BUG=b:130217151, b:171580862, b:176858827 TEST=Boot with patch series on volteer, verify IO-APIC IRQs in `/proc/interrupts` match what is expected. No `GSI INT` or `could not derive routing` messages seen in `dmesg` output. Verified TPM, touchpad, touchscreen IRQs all function as expected. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0c22a08ce589fa80d0bb1e637422304a3af2045c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49408 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29southbridge/intel/common: Move invalid PIRQ value to 0Tim Wawrzynczak
This makes structs that contain an `enum pirq` field that is default-initialized have the value PIRQ_INVALID Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Idb4c7d79de13de0e4b187a42e8bdb27e25e61cc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55281 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-28soc/intel: Drop casts around `soc_read_pmc_base()`Angel Pons
The `soc_read_pmc_base()` function returns an `uintptr_t`, which is then casted to a pointer type for use with `read32()` and/or `write32()`. But since commit b324df6a540d154cc9267c0398654f9142aae052 (arch/x86: Provide readXp/writeXp helpers in arch/mmio.h), the `read32p()` and `write32p()` functions live in `arch/mmio.h`. These functions use the `uintptr_t type for the address parameter instead of a pointer type, and using them with the `soc_read_pmc_base()` function allows dropping the casts to pointer. Change-Id: Iaf16e6f23d139e6f79360d9a29576406b7b15b07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-28xeon_sp/{cpx,skx}: Add config IFD_CHIPSET 'lbg'Johnny Lin
This is needed for ifdtool -p to detect CPX and SKX Lewisburg PCH as IFDv2. Change-Id: I21df9f700aedf131a38a776e76722bf918e6af84 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55746 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-26soc/intel/jasperlake: Select DISPLAY_FSP_VERSION_INFO_2Ronak Kanabar
Select DISPLAY_FSP_VERSION_INFO_2 for Jasper Lake soc. BUG=b:153038236 BRANCH=None TEST=Verify JSLRVP build with all the patch in relation chain and verify the version output prints no junk data observed. couple of lines from logs are as below. Display FSP Version Info HOB Reference Code - CPU = 8.7.16.10 uCode Version = 0.0.0.1 Change-Id: If68b704c4304357b0046a510545fc213d7ed5887 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45907 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-26soc/intel/cache_as_ram.S: Fix CAR issues with BootguardArthur Heymans
It looks like the 'clear_car' code does not properly fill the required cachelines so add code to fill cachelines explicitly. Change-Id: Id5d77295f6d24f9d2bc23f39f8772fd172ac8910 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christopher Meis <christopher.meis@9elements.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-25soc/intel/apollolake: Drop `xdci_can_enable()` callAngel Pons
The `xdci_can_enable()` function is called earlier to configure FSP-S UPDs. If it returned false, then the xDCI device will be disabled and the second `xdci_can_enable()` call will never be evaluated. Change-Id: I4bd08e3194ffccc79c8feaf8f34b2bb4077f760a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55789 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25soc/intel/alderlake: Fix the typo for FSP_S_CONFIG paramV Sowmya
This patch fixes the typo introduced in commit b03cadf for renaming FSP_S_CONFIG param name to s_cfg. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I0a9b500e528c68033008f3f8955d6c9c9ba8a737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-25soc/intel/apollolake/xdci.c: Use `dev` parameterAngel Pons
The `dev` parameter already points to the xDCI device. Change-Id: I122cc642c86b30804dd1176f77f4e2e1ebea4aa0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55788 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25soc/intel/skylake: Use `devfn_disable()` to handle XDCIAngel Pons
Done for consistency with other Intel SoCs. This allows moving the pattern inside a helper function. Change-Id: If95c4b6c1602e56436150a931210692f14630694 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55787 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25soc/intel/skylake: Use `is_devfn_enabled()`Angel Pons
Use the `is_devfn_enabled()` function for the sake of brevity. Change-Id: Ic848767799e165200f26c2d5a58fbd3b72b9c240 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55786 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-25soc/intel/common/cse: Add support for sending CSE End-of-Post messageTim Wawrzynczak
The CSE expects the boot firmware to send it an End-of-Post message before loading the OS. This is a security feature, and is done to ensure that the CSE will no longer perform certain sensitive commands that are not intended to be exposed to the OS. If processing the EOP message fails in any way on a ChromeOS build, (and not already in recovery mode), recovery mode will be triggered, otherwise the CSME BWG will be followed, which is in the following commit. BUG=b:191362590 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6f667905f759cc2337daca4cc6e09694e68ab7e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-06-25soc/intel/alderlake: Update s0ix cstate tableBernardo Perez Priego
Cstate C7 is not supported in ADL, replacing this unsupported state with C6 in the s0ix cstate table. BUG=None TEST=Boot device to OS. Print supported CStates and latencies. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I471f71481d337e3fafa4acab7fe8a39677c8710c Reviewed-on: https://review.coreboot.org/c/coreboot/+/55734 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24soc/intel/cache_as_ram.S: Fix SOC_INTEL_APOLLOLAKEArthur Heymans
Intel Apollolake does not support the bootguard MSRs 0x139 MSR_BC_PBEC and 0x13A MSR_BOOT_GUARD_SACM_INFO. Change-Id: Ief40028a1c85084e012a83db8080d478e407487b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-24soc/intel/cache_as_ram.S: Add macro to detect bootguard nemArthur Heymans
Change-Id: I3867fce29d23b647fad9845b9a5c08bb949fa354 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24soc/intel/alderlake: Update mainboard_memory_init_params() argumentSubrata Banik
This patch updates mainboard_memory_init_params() function argument from FSPM_UPD to FSP_M_CONFIG. Ideally mainboard_memory_init_params() function don't need to override anything other than FSP_M_CONFIG UPDs hence passing config block alone rather passing entire FSP-M UPD structure. Change-Id: I238870478a1427918abf888d71ba9c9fa80d3427 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-24soc/intel/alderlake: Refactor soc_silicon_init_params functionSubrata Banik
This patch create separate helper functions to fill-in required FSP-S UPDs as per IP initialization categories. This would help to increase the code readability and in future meaningful addition of FSP-S UPDs is possible rather adding UPDs randomly. TEST=FSP-S UPD dump shows no change without and with this code change. Change-Id: Iba51aebc74456449e24e51e2f309f14f951464a0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55233 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-24soc/intel/alderlake: Rename FSP_S_CONFIG variable from params to s_cfgSubrata Banik
Align FSP-S UPD structure (FSP_S_CONFIG) variable name (s_cfg) as FSP-M UPD structure variable (m_cfg). TEST=Able to build and boot ADLRVP to ChromeOS. FSP-S UPD dump shows no change in UPD values with this CL. Change-Id: I795f733f5f0cc64d3a556a1cd401323b35ba5a23 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-24soc/intel/alderlake: Refactor platform_fsp_silicon_init_params_cb functionSubrata Banik
Align platform_fsp_silicon_init_params_cb() function implementation with romstage/fsp_params.c file platform_fsp_memory_init_params_cb() as: |- Override FSP-S Arch UPD(s) using arch_silicon_init_params(). |- Override FSP-S SoC UPDs using soc_silicon_init_params(). |- Override FSP-S Mainboard UPDs using mainboard_silicon_init_params(). TEST=FSP-S UPD dump shows no change without and with this code change. Change-Id: I4cf0b8423fb4038a7feddd97ff585027b3012605 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-23soc/intel/common: Fix X2APIC NMI entry in ACPI MADTKyösti Mälkki
For X2APIC mode, replicate the APIC NMI entry flags and intention to address all the logical processors. Change-Id: I9c0537a3efba942329f80d7cfdbd910b8958516f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55182 Reviewed-by: Lance Zhao Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-23soc/intel/elkhartlake: Use is_devfn_enabled() for Device4Enable UPDSubrata Banik
1. Replace pcidev_path_on_root() and is_dev_enabled() functions combination with is_devfn_enabled() while enabling Thermal config. 2. Remove unused local variable of device structure type (struct device *). Change-Id: Icc2a44d6d3f1a78bf47354049dd9e2a0ed2282ba Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-23soc/intel/alderlake: Use devfn_disable() function for XDCISubrata Banik
Use devfn_disable() for disabling a PCI device rather than using `dev->enabled = 0`. Also, use is_devfn_enabled() to get the device current state prior updating the FSP-S UPD for XDCI. TEST=FSP-S disabled XDCI when `xdci_can_enable` returns 0 and XDCI is disabled at PCI enumeration `PCI: 00:14.1: enabled 0`. Change-Id: I5e10e5d0b80986e1e73573a86a957985840fe0b3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55727 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 04:27:38 +0000