Age | Commit message (Expand) | Author |
2017-02-17 | soc/intel/skylake: Add config option for Kabylake | Rizwan Qureshi |
2017-02-17 | intel/skylake: add function is_secondary_thread() | Robbie Zhang |
2017-02-16 | soc/intel/skylake: Add support for SPI device | Furquan Shaikh |
2017-02-16 | soc/intel/skylake: Add GSPI controller get_config support | Furquan Shaikh |
2017-02-16 | soc/intel/skylake: Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO... | Sooi, Li Cheng |
2017-02-14 | soc/intel/skylake: Perform CPU MP Init before FSP-S Init | Subrata Banik |
2017-02-14 | Revert: soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1 | Duncan Laurie |
2017-02-14 | intel/skylake: Disable FADT.8042 if NO_FADT_8042 is set | Jenny TC |
2017-01-22 | soc/intel/skylake: Include I2C code in romstage | Duncan Laurie |
2017-01-20 | soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1 | Barnali Sarkar |
2017-01-19 | driver/intel/fsp1_1: Fix boot failure for non-verstage case | Teo Boon Tiong |
2017-01-19 | soc/intel/skylake: Add SATA interrupt for APIC mode | Sooi, Li Cheng |
2017-01-13 | soc/intel/skylake: Rename car_stage.S for fsp2_0 | Teo Boon Tiong |
2017-01-11 | skylake: Do not pass VBT to FSP if display init not required | Duncan Laurie |
2016-12-26 | soc/intel/skylake: set TCC activation by BSP only | Sumeet Pawnikar |
2016-12-23 | soc/intel/skylake: Use the new SPI driver interface | Furquan Shaikh |
2016-12-13 | intel MMA: Enable MMA with FSP2.0 | Pratik Prajapati |
2016-12-07 | soc/intel/skylake: Remove unwanted spi_release call | Furquan Shaikh |
2016-12-07 | soc/intel/skylake: Remove redundant BootLoaderTolumSize assignment | Subrata Banik |
2016-12-07 | MMCONF_SUPPORT: Flip default to enabled | Kyösti Mälkki |
2016-12-07 | PCI ops: MMCONF_SUPPORT_DEFAULT is required | Kyösti Mälkki |
2016-12-06 | intel PCI ops: Remove explicit PCI MMCONF access | Kyösti Mälkki |
2016-12-06 | spi_flash: Make a deep copy of spi_slave structure | Furquan Shaikh |
2016-12-05 | spi: Define and use spi_ctrlr structure | Furquan Shaikh |
2016-12-05 | spi: Pass pointer to spi_slave structure in spi_setup_slave | Furquan Shaikh |
2016-12-05 | spi: Fix parameter types for spi functions | Furquan Shaikh |
2016-12-01 | romstage_handoff: add helper to determine resume status | Aaron Durbin |
2016-11-30 | soc/intel/skylake: Pass proper CPU flex ratio override to FSP | Naresh G Solanki |
2016-11-30 | soc/intel/skylake: Fix top_of_ram calculation | Naresh G Solanki |
2016-11-30 | soc/intel/skylake: Use SendVrMbxCmd1 for FSP 2.0 | Rizwan Qureshi |
2016-11-30 | soc/skylake: Move IO decode range out from pch_lpc_init | Teo Boon Tiong |
2016-11-30 | soc/intel/skylake: Remove pad configuration size hardcoding | Subrata Banik |
2016-11-30 | soc/intel/skylake: Disable Legacy PME for Root ports | Naresh G Solanki |
2016-11-30 | driver/intel/fsp2_0: Add version parameter to FSP platform callback | Andrey Petrov |
2016-11-28 | soc/intel/skylake: Add USB Port Over Current (OC) Pin programming | Subrata Banik |
2016-11-28 | soc/intel/skylake: Initialize UART based on CONFIG_UART_DEBUG | Teo Boon Tiong |
2016-11-23 | soc/intel/skylake: Define early smbus functions | Naresh G Solanki |
2016-11-22 | soc/intel: Use correct terminology for SPI flash operations | Furquan Shaikh |
2016-11-22 | spi: Get rid of flash_programmer_probe in spi_slave structure | Furquan Shaikh |
2016-11-22 | spi: Clean up SPI flash driver interface | Furquan Shaikh |
2016-11-22 | Remove explicit select MMCONF_SUPPORT | Kyösti Mälkki |
2016-11-21 | fsp2_0: implement stage cache for silicon init | Brandon Breitenstein |
2016-11-14 | skylake: Update the thermal time window for throttling action | Sumeet Pawnikar |
2016-11-12 | soc/intel/common/lpss_i2c: configure buses by rise/fall times | Aaron Durbin |
2016-11-11 | soc/intel/common/lpss_i2c: simplify API and use common config structure | Aaron Durbin |
2016-11-11 | soc/intel/skylake: move i2c voltage config to own variable | Aaron Durbin |
2016-11-09 | soc/intel/skylake: fix memory access beyond array bounds | Rizwan Qureshi |
2016-11-07 | soc/intel/skylake: Add _ACx methods for TSR0 sensor for fan control | Sumeet Pawnikar |
2016-11-07 | soc/intel/{sky,apollo}lake: Wait until GPE is clear when reading | Duncan Laurie |
2016-11-07 | soc/intel/skylake: Fix SATA booting to OS issue | Subrata Banik |
2016-11-07 | soc/intel/skylake: Avoid use of variable Local0 in TEVT in thermal.asl | Naresh G Solanki |
2016-11-07 | soc/intel/skylake: Add device id for PCH-Y | Naresh G Solanki |
2016-11-02 | intel/{skylake,apollolake}: Enable signalling of error condition | Patrick Georgi |
2016-10-28 | soc/intel/skylake: don't hardcode GPE0 standard reg | Aaron Durbin |
2016-10-28 | skylake: Add GPIO macro for configuring inverted APIC input | Duncan Laurie |
2016-10-28 | soc/intel/skylake: put back uart_debug.c into verstage | Aaron Durbin |
2016-10-27 | soc/intel/skylake: make inline function static | Naresh G Solanki |
2016-10-27 | skylake: Add support for eSPI SMI events | Duncan Laurie |
2016-10-27 | skylake: Prepare GPE for use in bootblock | Duncan Laurie |
2016-10-27 | skylake: Support for early I2C TPM driver | Duncan Laurie |
2016-10-27 | skylake: Fix wake source reporting with Deep S3 | Duncan Laurie |
2016-10-27 | skylake: Use COMMON_FADT | Duncan Laurie |
2016-10-26 | intel/skylake: Add support to enable wake-on-usb attach/detach | Furquan Shaikh |
2016-10-26 | soc/intel/skylake: Use intel common support to write-protect SPI flash | Furquan Shaikh |
2016-10-19 | soc/intel/skylake: Allow selecting FSP driver in Kconfig | Naresh G Solanki |
2016-10-16 | soc/intel/skylake: Handle platform global reset | Subrata Banik |
2016-10-16 | soc/intel/skylake: Implement Global Reset MEI message | Subrata Banik |
2016-10-16 | soc/intel/skylake: Enable HECI BAR for ME communication | Subrata Banik |
2016-10-16 | soc/intel/skylake: Select VBOOT_EC_SLOW_UPDATE if EC_GOOGLE_CHROMEEC is selected | Naresh G Solanki |
2016-10-01 | soc/intel/skylake: Add config option for Skylake-H Sku support | Teo Boon Tiong |
2016-09-19 | soc/intel/skylake: Add FSP 2.0 support in ramstage | Naresh G Solanki |
2016-09-15 | soc/intel/skylake: Add FSP 2.0 support in romstage | Barnali Sarkar |
2016-09-04 | Makefile.inc: Use $(MAINBOARDDIR) | Iru Cai |
2016-09-02 | Fix newlines at the end of files | Martin Roth |
2016-08-31 | src/soc: Add required space before opening parenthesis '(' | Elyes HAOUAS |
2016-08-31 | skylake: Add initial FSP2.0 support | Rizwan Qureshi |
2016-08-30 | soc/intel/skylake: Include Kabylake specific IGD Device IDs | Barnali Sarkar |
2016-08-24 | soc/intel/skylake: Bump up bootblock size to 48K | Furquan Shaikh |
2016-08-24 | soc/intel/skylake: align chromium Chrome OS config | Aaron Durbin |
2016-08-20 | intel/skylake: Do not halt in poweroff if in SMM | Furquan Shaikh |
2016-08-19 | soc/intel/skylake: use SPI flash boot_device_rw() for ealy stages | Aaron Durbin |
2016-08-19 | soc/intel/skylake: make SPI support early stages | Aaron Durbin |
2016-08-19 | Kconfig: introduce writable boot device notion | Aaron Durbin |
2016-08-18 | soc/intel/skylake: Correct Cache as ram size | Rizwan Qureshi |
2016-08-18 | soc/intel/skylake: Move bootblock specific code from skylake/romstage | Naresh G Solanki |
2016-08-18 | skylake: Do FspTempRamInit only for FSP1.1 & tidy up PCH early init | Rizwan Qureshi |
2016-08-17 | soc/intel/skylake: restore MCHBAR and DMIBAR programming | Rizwan Qureshi |
2016-08-15 | soc/intel/skylake: don't include all SPI flash drivers | Aaron Durbin |
2016-08-14 | soc/intel/skylake: Change name pmc_tco_regs to smbus_tco_regs | Barnali Sarkar |
2016-08-10 | Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR) | Martin Roth |
2016-08-08 | chromeos chipsets: select RTC usage | Aaron Durbin |
2016-08-08 | soc/intel/skylake: Clean up SoC ASL code. | Barnali Sarkar |
2016-08-08 | skylake/devicetree: Add PIRQ Routing programming | Barnali Sarkar |
2016-08-08 | soc/intel/skylake: Cleanup patch for Skylake SoC | Barnali Sarkar |
2016-08-06 | soc/intel/skylake: Add Kabylake device Ids | Rizwan Qureshi |
2016-08-04 | soc/intel/skylake: Correct address of I2C5 Device | Barnali Sarkar |
2016-08-02 | intel/skylake: Fix UART build options | Furquan Shaikh |
2016-08-01 | Add newlines at the end of all coreboot files | Martin Roth |
2016-07-31 | src/soc: Capitalize CPU, ACPI, RAM and ROM | Elyes HAOUAS |
2016-07-31 | intel/skylake: Enable signalling of error condition | Patrick Georgi |