summaryrefslogtreecommitdiff
path: root/src/soc/intel/elkhartlake
AgeCommit message (Collapse)Author
2023-05-24soc/intel/elkhartlake: Make PCIe root port max payload size configurableMario Scheithauer
The data payload size of PCIe root ports can be set to either 128 (default) or 256 bytes. A bigger payload size can improve PCIe data throughput on the given port. FSP-S provides a parameter to configure this value. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I5798a72adaa8089dda0b4bc12266b5a235ed4aa3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-05-10soc/intel/elkhartlake: Make hard drive type for SATA ports configurableMario Scheithauer
Intel's EHL FSP offers the possibility to select the connected hard drive type to SATA ports. One has the option to choose between HDD ('0' - default) and SSD ('1'). This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: Idb03aff5b6c5df592b47e2f4abe4fe58ac7151ba Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74946 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-23soc/intel/elkhartlake: Define DIMM_SPD_SIZE in SoC KconfigMichał Żygowski
The default SPD size is set to 256 bytes, instead of 512 for LPDDR4/DDR4 if not overridden by the mainboard Kconfig. This caused the SMBus libraries to read only the lower half of the DIMM SPD on protectli/vault_ehl. The lower half of the SPD passed to FSP causes a bug in DIMM change detection, which relies on the CRC of the manufacturer bytes in the upper half of the SPD (CRC of zero bytes always gives zero so no change was assumed). Setting the DIMM SPD size to 512 fixes it. Setting the SPD size in SoC will also avoid such problems in the future Elkhart Lake ports. Elkhart Lake supports only LPDDR4/DDR4 so providing the correct default of 512 bytes is an obvious thing to do. TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see FSP is retraining the memory instead of doing the fastboot with old DIMM data. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I998ed8781951034419cadc26c04ff1e0a124b267 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73933 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-22soc/intel/elkhartlake: Increase BSP stack size by 1 KiB to 193 KiBMichał Żygowski
The Kconfig help section says FSP uses 192 KiB of stack (0x30000) and coreboot's romstage requires ~1 KiB, but it is not satisfied currently. Increase the BSP stack size by the missing 1KiB for romstage like other SoCs do. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iddd4a4613bc174aec4331732371a27450225258c Reviewed-on: https://review.coreboot.org/c/coreboot/+/73820 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-21soc/intel/elkhartlake: Make PCIe root port speed limit configurableMario Scheithauer
In cases where there are limitations on the connected device behind the PCIe root port it can be necessary to limit the speed. The FSP parameter 'PcieRpPcieSpeed' allows to set the speed limit. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I9fc24de1682279e4ae4c090147a6ef7995b441bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-15soc/intel/elkhartlake: Select `X86_CLFLUSH_CAR` configLean Sheng Tan
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region based on commit 3134a81 for boot performance improvement. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I8f8a0bfeaea508d3b4ad1b3fe2e68742cbab5570 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73687 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-27soc/intel/elkhartlake/romstage/fsp_params.c: separate debug paramsMichał Żygowski
This commit separates setting FSP debug params from the rest of code and configures FSP serial port parameters. Other ports (0x3E8 and 0x2E8) are omitted since Elkhart Lake FSP only supports 0x3F8 and 0x2F8. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I84f7c19a7c2fd5a4db18f5a37e1c667da017aace Reviewed-on: https://review.coreboot.org/c/coreboot/+/72404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-02-24soc/intel/ehl: Select CSE defined ME spec version for elkhartlakeDinesh Gehlot
Elkhartlake based SoCs uses Intel's Management Engine (ME), version 15. This patch selects ME 15 specification defined at common code and removes elkhartlake SoC specific ME code and data structures. BUG=b:260309647 Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I3186f509c63b3a892c72cb1fa08fc094735d6eeb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73245 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-23soc/intel/elkhartlake/gpio.c: Fix GPD reset mapMichał Żygowski
The reset bit mapping was incorrectly assigned to GPIO groups. The reset mapping for Community 0 actually reflects the GPD reset mapping. Change the Community 0 reset mapping to the correct default map and fix the GPD reset mapping. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I2b9d093ca7ea0f5087f49671ca457c0b45927918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-23soc/intel: Use common codeflow for MP initArthur Heymans
This fixes MP init on xeon_sp SoCs which was broken by 69cd729 (mb/*: Remove lapic from devicetree). Alderlake cpu code was linked in romstage but unused so drop it. Change-Id: Ia822468a6f15565b97e57612a294a0b80b45b932 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-16soc/intel/elkhartlake/fsp_params.c: wire up remaining ddc paramsMichał Kopeć
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I434c22cd784e24c76bc47aee8728d28255b762db Reviewed-on: https://review.coreboot.org/c/coreboot/+/72405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-01treewide: Remove duplicated include <device/pci.h>Elyes Haouas
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>. Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-31soc/intel/ehl: Move ME FSR structures to pertinent headerDinesh Gehlot
This patch moves ME host firmware status register structures to ME header file. It also marks unused structure fields to reserved. The idea here is to decouple ME specification defined structures from the source file `.c` and keep those into header files so that in future those spec defined header can move into common code. The current and future SoC platform will be able to select the correct ME spec header based on the applicable config. It might be also beneficial if two different SoC platforms would like to use the same ME specification and not necessarily share the same SoC directory. BUG=b:260309647 Test=Able to build and boot. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I7dfd331e70f6d03c88248ca5147dbe6785a8e69d Reviewed-on: https://review.coreboot.org/c/coreboot/+/72413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-01-20soc/intel/*/include/soc/gpio.h: Add "IWYU pragma: export" commentElyes Haouas
Change-Id: If44a07503470f57037b59d03eea830703a3c604a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72100 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20soc/intel: Remove unused <stddef.h>Elyes Haouas
Change-Id: I8432d799c9bf23058b7b903bb07f6c2b4308eeba Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72103 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18soc/intel/elkhartlake: Fix incorrect `prev_sleep_state` issueSubrata Banik
The patch fixes indication of incorrect `prev_sleep_state` on the next boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power failure. As a result, every early warm/global reset is considered as power failure after looking into the PMC MMIO CON-A register alone (as ignoring the ACPI PM_CTRL.WAK_STS bit). As per the code comment this code logic is expected to check the power failure reason if PCH doesn't set the WAK_STS while waking from G3 state. Without this patch: Observation: Resuming after a warm reset is considered as `prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit is set. pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000 GEN_PMCON: d1215238 00002200 .... prev_sleep_state 5 With this patch: Observation: Resuming after a warm reset is considered as `prev_sleep_state 0`. It matches with the SLP_TYP is zero and WAK_STS bit is set. pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000 GEN_PMCON: d1215238 00002200 .... prev_sleep_state 0 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib43d3402f94f47dc576fb99a6b2a7acf6f0af220 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71982 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18soc/intel/elkhartlake: Use common gpio.h includeDinesh Gehlot
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes with the common gpio.h which includes soc/gpio.h which includes intelblocks/gpio.h which includes soc/gpio_defs.h. BUG=b:261778357 TEST=Able to build and boot. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I73bac9560d0ff315d6fe6f4efc3ee9011f77c660 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72036 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11soc/intel/elkhartlake: Provide a way to enable real-time tuningWerner Zeh
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve real-time behaviour of the SoC (see Intel doc #640979). It describes, amongst knobs for the OS, a couple of firmware settings that need to be set properly to reduce latencies in all the subsystems. Things like clock and power gating as well as low power states for peripherals and buses are disabled in this scenario. This patch takes the mentioned UEFI parameters from the guide and translates them to FSP-M and FSP-S parameters. In addition, a chip config switch guards this tuning which can be selected on mainboard level if needed. When this real-time tuning is enabled, the overall system performance in a real-time environment can be increased by 2-3%. Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-01-11soc/intel/elkhartlake/chip.h: Include types.h instead of stdint.hWerner Zeh
As the used 'bool' type is defined in stdbool.h, include types.h (instead of stdint.h) which includes all needed header files. Change-Id: I3f75776575a7a5f70484411b9f3458530f706ec4 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71790 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10soc/intel/elkhartlake: Make SATA speed limit configurableWerner Zeh
In cases where there are limitations on the mainboard it can be necessary to limit the used SATA speed even though both, the SATA controller and disk drive support a higher speed rate. The FSP parameter 'SataSpeedLimit' allows to set the speed limit. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-12-27tree/acpi: Replace constant "Zero" with actual numberFelix Singer
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27{acpi,arch,soc}/acpi: Replace constant "One" with actual numberFelix Singer
Change-Id: I3dfd7dd1de3bd27c35c195bd43c4a5b8c5a2dc53 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71522 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22soc/intel/elkhartlake: Add DPTF ACPI Device IDs into header fileSubrata Banik
This patch adds DPTF ACPI Device IDs into the header file (soc/dptf.h) so that upcoming patches in this patch train can achieve more common code. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia4c3f1dbca2c0099cbf00137008c1aa1bcb196b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71125 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-15treewide: Remove unused 'include <arch/io.h>'Elyes Haouas
Change-Id: I6f1d7625eb457084ba893b25518fdfdb59cf64db Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-12-07soc/intel: Set IO APIC DMAR entry based on hwArthur Heymans
This avoids the need to hardcode the IOAPIC ID. Change-Id: I0965b511e71c58f1c31433bc54595a5fabb1c206 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70268 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-11-26src/soc/intel: Remove unnecessary space after castsElyes Haouas
Change-Id: I098104f32dd7c66d7bb79588ef315a242c3889ba Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-24soc/intel/ehl: Add MDIO operation to TSN GbE deviceMario Scheithauer
This patch refactors the MDIO access for the TSN GbE device by placing the MDIO read and write functions into mdio_bus_operations struct which is assigned to the .ops_mdio member of the PCI device struct. In this way the MDIO interface of the TSN GbE device is exposed and can be used by other drivers if needed. Change-Id: I5d1b9dd2f2ba8c18291fff314c13f0c3851784aa Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-17soc/intel: Add node_num to dimm_info struct + adjust dimm_info_fillDavid Milosevic
The dimm_info structure (defined in src/include/memory_info.h) currently does not hold information about the DIMM's node/controller ID. This patch extends the dimm_info structure by adding a new field for the node ID, called node_num. Also, adapt the dimm_info_fill() function accordingly to populate the newly-added field. Background: These changes are necessary for the Atlas mainboard, where we are currently experiencing issues with the DIMMs device/bank locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a distinct NODE ID. By looking at the smbios table we see Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order to distinguish them. This patch was tested by building and booting for the Alderlake-P RVP board, which has the same DIMM slot configuration as the Prodrive Atlas mainboard. Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12soc/intel/elkhartlake: Enable 'scan_bus' on TSN GbEMario Scheithauer
For extern ethernet PHY access it is necessary to enable the 'scan_bus' functionality. Change-Id: I88050df2059ec7e0b27a132bca626eaef3d5dfb0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69385 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-09soc/intel/elkhartlake: Correct I2C base clock to 100 MHzWerner Zeh
According to measurements Elkhart Lake seems to drive the internal I2C controllers with 100 MHz instead of the common 133 MHz. The datasheet itself is quite vague on this definition, just one place mentions that it is 100 MHz (register description for offset 0x94). This patch changes the I2C controller base frequency to 100 MHz. The verification was done by measuring the set up resulting I2C clock for both 100 and 400 kHz. Change-Id: I7c826bbb01b53e3661746e49f25441565068d1c2 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-08soc/intel: Use `PWRMBASE` over static `Index 0` for PMCSubrata Banik
This patch replaces static index 0 for PMC read resources with PCI configuration offset 0x10 (PWRMBASE). TEST=Able to build and boot Google, Rex to OS. Without this change: [SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 With this change: [SPEW ] PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 10 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iee2523876a8045e70effd5824afc327d1113038b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-04soc/intel: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I7da9c672ee230dfaebd943247639b78d675957e4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-10-31soc: Add SPDX license headers to MakefilesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-10-25soc/intel/elkhartlake: Fix incorrect divider for MDIO clockWerner Zeh
After some measurements it turned out that Elkhart Lake uses a higher CSR clock internally from which the MDIO clock is derived. In order to stay compliant with the specification, the MDIO clock needs to be lower than 2.5 MHz. Therefore, the divider needs to be 102 and not 62. This patch changes the define to match the new divider value and uses this new define at the appropriate place. Test=Measure the MDIO clock rate on mc_ehl2 which results in 2 MHz. Change-Id: Idf498c3547530dfa395f54488ef244e787062e34 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-10-25soc/intel/eklhartlake: Provide an option to disable the L1 prefetcherWerner Zeh
Depending on the real workload that is executed on the system the L1 prefetcher might be too aggressive and will populate the L1 cache ahead with data that is not really needed. In the end, this will result in a higher cache miss rate thus slowing down the real application. This patch provides a devicetree option to disable the L1 prefetcher if needed. This can be requested on mainboard level if needed. Change-Id: I3fc8fb79c42c298a20928ae4912ee23916463038 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68667 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-22payloads/edk2: Disable the CPU Timer Lib unless supportedSean Rhodes
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp Counter Frequence. For CPUs that do not support this instruction, EDK2 must include a different library which is the reason why this must be configured at build time. If this is enabled, and the CPU doesn't support 0x15, it will fail to boot. If is not enabled, and the CPU does support 0x15, it will still boot but without support for the leaf. Consequently, disabled it by default. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-10-12soc/intel: Kconfig: Correct UART source clock value in commentWonkyu Kim
Correct UART source clock value in comment from 120 MHz to 100 MHz. BUG=b:249530903 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifc17357051ae0b3bc663da467b4fc809a46024d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68286 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-12treewide: Use 'fadt->x_pm_tmr_blk.addrl = fadt->pm_tmr_blk'Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I7ddb4ea792b9a2153b7c77d2978d9e1c4544535d Reviewed-on: https://review.coreboot.org/c/coreboot/+/68275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-10-12soc/intel/ehl: Fix incorrect access to MAC_MDIO_DATA registerMario Scheithauer
Function 'setbits16' performs an 'OR' operation with the new data and the origin register entry. This can lead to an incorrect value in the register which can then lead to issues. Change-Id: I0212420be770e2ffdabebbfaf5dfbf8d99d25915 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-10-12soc/intel/ehl: Support maximum memory frequency selectionChristian Gmeiner
Makes it possible to configure the maximum allowed/supported DDR memory frequency on a per mainboard basis. Test - Define maximum memory frequency in mainboard devicetree.cb - Boot into Linux and run 'sudo dmidecode --type 17' to check memory speed - Boot into Linux and run 'phoronix-test-suite benchmark ramspeed' Change-Id: I9e0c7225e2141e675a20b8e3f0dbe8c0b3a29b28 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68097 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-10-07soc/intel/ehl: Set Ethernet controller to D0 power stateMario Scheithauer
To be able to change the MAC addresses, it is necessary that the controllers are in D0 power state. As of FSP MR3, Intel has set the controllers to D3 power state at the end of FSP-S TSN GbE initialization. This patch sets the state back to D0 before the programming of the MAC addresses. Test: - Build coreboot with FSP MR4 for mc_ehl2 mainboard - Boot into Linux and check MAC addr via 'ip a' Change-Id: I4002d58eb4332ba45c35d07820900dfd2c637f21 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-09-27acpi/acpi_pm.c: refactor acpi_pm_state_for_* functionsFabio Aiuto
Use just one function to get the chipset powerstate and add an argument to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the failure log accordingly. TEST: compile tested and qemu emulation successfully run Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-22soc/intel/spi: Move BIOS flash SPI controllers to fast SPI driverWerner Zeh
There are two classes of SPI controllers on Intel chipsets: * generic usable SPI controllers * SPI controller hosting the BIOS flash (fast SPI controller) While the first class can be used for generic peripheral attachment the second class mostly controls the BIOS flash and a TPM device (if enabled). The generic SPI driver is not fully applicable to the fast SPI controller. In addition, the fast SPI controller reports the reserved MMIO range used for the BIOS flash mapping so that the OS is aware of this range. This patch moves the fast SPI controller of all known SoCs to the fast SPI driver in common code. In addition, the PCI device for the fast SPI controller is removed from the function 'spi_soc_devfn_to_bus' as this is a callback of the generic SPI driver. Change-Id: Ia881c1d274acdcf7f042dd8284048a7dd018a84b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-14timer: Change timer util functions to 64-bitRob Barnes
Since mono_time is now 64-bit, the utility functions interfacing with mono_time should also be 64-bit so precision isn't lost. Fixed build errors related to printing the now int64_t result of stopwatch_duration_[m|u]secs in various places. BUG=b:237082996 BRANCH=All TEST=Boot dewatt Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-20soc/intel/common/pch: Decouple CLIENT from BASEAngel Pons
In preparation to add a third option, have "Client" platforms select a dedicated Kconfig option instead of the common "_BASE" option. Rewrite the help texts to clarify what "Client" and "Server" mean, because the terms refer to the type of silicon and not to the market segment. Some uniprocessor (single-socket) servers are actually client platforms and there are some multi-socket workstations based on a server platform. Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-06-29soc/intel/elkhartlake: Fix PMC read_resources callbackTim Wawrzynczak
The `limit` field for the PMC fixed BAR was incorrectly set to the `base + size + 1`, where it should be `base + size - 1`, to correctly tell the allocator the limit. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib2d8c7ffe87fdd970f3172bb4e6b2c9386859ab3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65460 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-05soc/intel/elkhartlake: Remove board related vboot kconfigs from socLean Sheng Tan
Since the non-volatile storage as it handles VBNV storage in either flash or CMOS, is chosen based on board design, removing VBOOT_VBNV_CMOS & VBOOT_VBNV_CMOS_BACKUP_TO_FLASH from EHL soc kconfig. Will add the option to EHL CRB mainboard kconfig later. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I97fb7017bff7751d64571d1a8ee7c8b9e2771731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64473 Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-04soc/intel: Rename heci_init to cse_initSubrata Banik
This patch renames heci_init() to cse_init() as HECI initialization should have a bigger scope than just initializing the CSE (a.k.a HECI1 alone). BUG=none TEST=Able to build and boot google/taeko. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic7edd55ccdcd70b244615fa06f81803a0ae6ce80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-06-03soc/intel/elkhartlake: Select SOC_INTEL_RAPL_DISABLE_VIA_MCHBARUwe Poeche
Since of moving RAPL disabling to common code a config switch is available to select that RAPL disabling has to be done via MCHBAR. This patch selects the switch for EHL. Test: Boot mc_ehl1 and ensure that relevant bits in MCHBAR are the same as before the patch. Change-Id: I1d0b7f650aa3ccf89c5c35d9b60a83a1ce48c74f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-06-03intel/common/block: move RAPL disabling to common codeUwe Poeche
This patch brings the feature of disabling RAPL to common code. It replaces the current solution for APL and EHL. For special case if RAPL disabling is only working via changes in MCHBAR a new config switch was introduced. Test: Boot mc_apl4/5 with this patch and ensure that the relevant bits in MSR 0x610 are the same as before the patch. Change-Id: I2098ddcd2f19e3ebd87ef00c544e1427674f5e84 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-06-02soc/intel/common/cpu: Use SoC overrides to set CPU privilege levelSubrata Banik
This patch implements a SoC overrides to set CPU privilege level as the MSR is not consistent across platforms. For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151. BUG=b:233199592 TEST=Build and boot google/taeko to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4584516102560e6bb2a4ae8c0d036be40ed96990 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-05-23soc/intel/elkhartlake/systemagent: Disable RAPL based on KconfigUwe Poeche
This patch provides the possibility for EHL based boards to disable RAPL settings via SOC_INTEL_DISABLE_POWER_LIMITS config switch. On Elkhart Lake the way via setting relevant MSR bits does not work. Therefore the way via MCHBAR is choosen. Test: Check MCHBAR mapped registers (MCH_PKG_POWER_LIMIT) on mc_ehl1. Change-Id: I5be6632b15ab8e14a21b5cd35152f82fec919d9f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-05-21soc/intel/ehl: Provide function to change PHY-to-MAC IRQ polarityMario Scheithauer
EHL MAC side expects a rising edge signal for an IRQ. Based on the mainboard wiring it could be necessary to change the interrupt polarity. This patch provides the functionality to invert a falling edge signal that comes from an external PHY. The inverting can be activated via devicetree parameter. Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-05-20soc/intel/ehl: Use defines for Ethernet controller IDsMario Scheithauer
Use defines for a better reading of the code. Change-Id: I8e696240d649c0ea2341b8f04b62eebffebc1d57 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64519 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-20soc/intel/ehl: Fix logical bug for PseTsnGbePhyInterfaceTypeLean Sheng Tan
By right if PseTsnGbeSgmiiEnable is disable, PseTsnGbePhyInterfaceType should use RGMII setting. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: If593a5534716a9e93f99cb155fb5e86e12b1df17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-05-18soc/intel/elkhartlake: Skip FSP Notify APIsLean Sheng Tan
Follow this commit 95986169f (soc/intel/alderlake: Skip FSP Notify APIs) to skip FSP Notify APIs. Elkhart Lake SoC deselects Kconfigs as below: - USE_FSP_NOTIFY_PHASE_READY_TO_BOOT - USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE to skip FSP notify APIs (Ready to boot and End of Firmware) and make use of native coreboot driver to perform SoC recommended operations prior booting to payload/OS. When deselecting these Kconfigs, cse_final_ready_to_boot() and cse_final_end_of_firmware() in the common cse driver will be used instead as required operations to perform prior to booting to OS. Check out this CL for further info: commit 90e318bba (soc/intel/common/cse: Add `finalize` operation for CSE) Additionally, create a helper function `heci_finalize()` to keep HECI related operations separated for easy guarding again config. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I477c204233f83bc96fd5cd39346bff15ed942dc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-18soc/intel/ehl/tsn_gbe.c: Reduce `void *` castsAngel Pons
Remove two redundant `void *` casts in `clrsetbits32()` calls. In addition, preemptively retype the `io_mem_base` variable in order to avoid having to add casts in future commits. Change-Id: Iae9c8189a6f8cd29181c52c2241789c6d392d77b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2022-05-17soc/intel/elkhartlake/chip.h: Drop unused membersAngel Pons
Remove devicetree options that aren't used anywhere in the code. Change-Id: I7eace61079e14423325332d277fdda4f986fd133 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64403 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-17soc/intel/elkhartlake: Enable SMBus depending on dev stateAngel Pons
Program the `SmbusEnable` FSP UPD according to the SMBus PCI device's state in the devicetree. This avoids having to manually make sure the SMBus PCI device and the `SmbusEnable` setting are in sync. Change-Id: I275a981f914a55dc57a75e7d436912ff0255a293 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64402 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-16soc/intel/elkhartlake: Provide ability to update TSN GbE MAC addressesMario Scheithauer
This patch provides the functionality to change the TSN GbE MAC addresses. Prerequisite for this is a mainboard specific function that returns a matching MAC address. A test was performed with the next patch in the series, which enables the TSN GbE driver for mc_ehl2 mainboard. Change-Id: I2303a64cfd09fa02734ca9452d26591af2a76221 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-05-16soc/intel/elkhartlake: Implement TSN GbE driverMario Scheithauer
To be able to make EHL Ethernet GbE-TSN Controller configurable, a driver is required. Functionality comes in following patches. Change-Id: I7522914c56b74486bb088280d2686acf7027d1d3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-05-16soc/intel/*: Use SSDT to pass A4GB and A4GSArthur Heymans
GNVS is more fragile as you need to keep struct elements in sync with ASL code. Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-29soc/{amd/stoneyridge,intel}: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. intel/apl is an exception since the bootblock size is limited to 32K. Change-Id: I5e02961183b5bcc37365458a3b10342e5bc2b525 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-27soc/intel/cmn/lockdown: Perform SA lockdown configurationSubrata Banik
`sa_lockdown_cfg` function ensures locking the PAM register hence, skip dedicated calling into `sa_lock_pam()` from the SoC `finalize.c` file. Dropped sa_lock_pam() call from ADL/CNL/EHL/JSL and TGL. Additionally, this patch enforces SA lockdown configuration for SKL and ICL as well. BUG=b:211954778 TEST=Able to build google/brya with these changes. > localhost ~ # lspci -xxx | less 00:00.0 Host bridge: Device 8086:4601 (rev 04) Bit 0 for all PAM registers a.k.a, PAMx_0_0_0_PCI.LOCK bit is set (meaning locked). Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibd464d2507393ed0c746eb1fbd10e36092ed5599 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-20soc/intel: clean up dmi driver codeWonkyu Kim
1. Remove dmi.h as it's migrated as gpmr.header 2. Remove unused gpmr definitions 3. For old platforms, define DMI defintions in c code for less code changes. TEST=Build Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib340ff1ab7fd88b1e7b3860ffec055a75e562de7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-04-06soc/intel/ehl/fsp_params: Set Intel Speed Step (Eist) from devicetreeUwe Poeche
This patch provides the set value for intel speed step in devicetree for FSPS. Before that in case of not set value in device tree the default value of disabled was overwritten by default enabled of FSP. Test: mainboard/siemens/mc_ehl/variants/mc_ehl1 Check status of Bit 16 in MSR 0x1a0 after boot. Change-Id: I0a5ef4968a27978116c21ce35b3818c6b36e086f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-29soc/intel: Move `pmc_clear_pmcon_sts()` into IA common codeSubrata Banik
This patch moves `pmc_clear_pmcon_sts` function into common code and remove SoC specific instances. Accessing PMC GEN_PMCON_A register differs between different Intel chipsets. Typically, there are two possible ways to perform GEN_PMCON_A register programming (like `pmc_clear_pmcon_sts()`) as: 1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration register. 2. Using MMIO access when GEN_PMCON_A is a memory mapped register. SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to perform GEN_PMCON_A register programming using PMC MMIO. BUG=b:211954778 TEST=Able to build brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-03-25soc/intel/*/meminit.c: Fix formatted printArthur Heymans
This fixes building with clang. Change-Id: If2686b0938d34cd66393eb14205c5c8a5b3ba98b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-02-25intelblocks/pcie: Correct mapping between LCAP port and coreboot indexMAULIK V VAGHELA
coreboot uses port index which is 0 based for all PCIe root ports. In case of PCIe remapping logic, coreboot reads LCAP register from PCIe configuration space which contains port number (mostly 1 based). This assumption might not be true for all the ports in coreboot. TBT's LCAP registers are returning port index which are based on 2. coreboot's PCIe remapping logic returns port index based on index 1. This patch adds variable to pcie_rp_config to pass lcap_port_base to the pcie remapping function, so coreboot can map any n-based LCAP encoding to 0-based indexing scheme. This patch updates correct lcap_port_base variable for all PCIe root ports for all SOCs, so that function returns correct 0-based index from LCAP port number. BUG=b:210933428 BRANCH=None TEST=Check if code compiles for all ADL boards Change-Id: I7f9c3c8e753b982e2ede1a41bf87d6355b82da0f Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25arch/x86: factor out and commonize HPET_BASE_ADDRESS definitionFelix Held
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000, so define this once in arch/x86 and include this wherever needed. The old AMD AGESA code in vendorcode that has its own definition is left unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-02-18drivers/fsp/fsp2_0: Rework FSP Notify Phase API configsSubrata Banik
This patch renames all FSP Notify Phase API configs to primarily remove "SKIP_" prefix. 1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM -> USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM 2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT -> USE_FSP_NOTIFY_PHASE_READY_TO_BOOT 3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE -> USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE The idea here is to let SoC selects all required FSP configs to execute FSP Notify Phase APIs unless SoC deselects those configs to run native coreboot implementation as part of the `.final` ops. For now all SoC that uses FSP APIs have selected all required configs to let FSP to execute Notify Phase APIs. Note: coreboot native implementation to skip FSP notify phase API (post pci enumeration) is still WIP. Additionally, fixed SoC configs inclusion order alphabetically.  BUG=b:211954778 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-15soc/intel/*/pmc: Add `finalize` operation for pmcSubrata Banik
This patch implements the required operations to perform prior to booting to OS using coreboot native driver when platform decides to skip FSP notify APIs, i.e., Ready to Boot and End Of Firmware. Additionally, move the PMCON status bit clear operation to `.final` ops to cover any such chances where FSP-S Notify Phase or any other later boot stage may request a global reset and PMCON status bit remains set. BUG=b:211954778 TEST=Able to build brya with these changes. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0a0b869849d5d8c76031b8999f3d28817ac69247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-15soc/intel/elkhartlake: Fix PCR ID for eSPIWerner Zeh
According to the Datasheet Volume 1 (doc #636112, [1]) the PCR port ID for eSPI is 0x72 (see chapter 25.2.2). Fix it in the header file. [1]: https://cdrdv2.intel.com/v1/dl/getContent/636112?explicitVersion=true Test=Read and modify PCR registers of eSPI controller. Change-Id: I5b07ef0f3a285f981791b1f4b4cdbda98ccf05ad Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61841 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-05cpu/x86/lapic: Move LAPIC configuration to MP initKyösti Mälkki
Implementation for setup_lapic() did two things -- call enable_lapic() and virtual_wire_mode_init(). In PARALLEL_MP case enable_lapic() was redundant as it was already executed prior to initialize_cpu() call. For the !PARALLEL_MP case enable_lapic() is added to AP CPUs. Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-02soc/intel/elkhartlake: Use SBI msg to disable HECI1Subrata Banik
Select HECI_DISABLE_USING_SMM config for Elkhart Lake to disable HECI1 device using the SBI msg in SMM. BUG=none TEST=None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4ef7ff7aa234ce411092d70bcb2c9141609be90e Reviewed-on: https://review.coreboot.org/c/coreboot/+/61453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-02-02soc/intel/common/cse: Rework heci_disable functionSubrata Banik
This patch provides the possible options for SoC users to choose the applicable interface to make HECI1 function disable at pre-boot. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_SBI` config is used for disabling heci1 using non-posted sideband write (inside SMM) after FSP-S sets the postboot_sai attribute. Applicable from CNL PCH onwards. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PMC_IPC` config is used for disabling heci1 using PMC IPC command `0xA9`. Applicable from TGL PCH onwards. `SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PCR` config is used for disabling heci1 using private configuration register (PCR) write. Applicable for SoC platform prior to CNL PCH. Additionally, add PID_CSME0 macro for SKL, Xeon_SP and APL to fix the compilation failure. Finally, rename heci_disable() function to heci1_disable() to make it more meaningful. BUG=none TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7e0bab0004013b999ec1e054310763427d7b9348 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-30soc/intel/elkhartlake: Drop stale eNEM TODO commentSubrata Banik
This patch drops stale TODO comment about enabling eNEM on EHL. eNEM is non-POR on the elkhartlake product. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I47fd755dec2324e05e6349e51e15abcf26967604 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-25soc/intel/ehl: Add Kconfig option to disable reset on TCO expirationWerner Zeh
The TCO timer is the default watchdog of an x86 host and can reset the system once it has expired for the second time. There are applications where this reset is not acceptable while the TCO is used. In these applications the TCO expire event generates an interrupt and software takes care. There is a bit in the TCO1_CNT register on Elkhart Lake to prevent this reset on expiration (called NO_REBOOT, see doc #636722 ). This bit can either be strapped on hardware or set in this register to avoid the reset on expiration. While the hardware strap cannot be overridden in software, the pure software solution is more flexible. Unfortunately, the location for this bit differs among the different platforms. This is why it has to be handled on soc level rather than on TCO common code level. This commit adds a Kconfig option where NO_REBOOT can be enabled. This makes it easy to reach this feature over to the mainboard where it can be selected if needed. Change-Id: Iaa81bfbe688edd717aa02db86f0a93fecdfcd16b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-25soc/intel/elkhartlake: Add PSE TSN supportLean Sheng Tan
Enable PSE GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Add PSE GBE ACPI devices 3. Refactor PCH GBE FSP-S code and merge it together with PSE GBE code Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-25soc/intel/elkhartlake: Introduce Intel PSELean Sheng Tan
The Intel® Programmable Services Engine (Intel® PSE) is a dedicated offload engine for IoT functions powered by an ARM Cortex-M7 microcontroller. It provides independent, low-DMIPS computing and low-speed I/Os for IoT applications, plus dedicated services for real-time computing and time-sensitive synchronization. The PSE hosts new functions, including remote out-of-band device management, network proxy, embedded controller lite and sensor hub. This CL enables the user to provide the base address of the PSE FW blob which will then be loaded by the FSP-S onto the ARM controller. PSE FW will do the initialization work of PSE controller and its peripherals. The loading of PSE FW should have negligible impact on boot time unless PSE controller could not locate the PSE FW and FSP will attempt to redo PSE FW loading and wait for PSE handshake until it times out. Once PSE controller locate the PSE FW, it will do initialization concurrently by itself with coreboot booting. It also adds PSE related FSP-S UPD settings which enable the setup of peripheral ownership (assigned to the PSE or x86 subsystem) and interrupts. These assignments need to take place at a given point in the boot process and cannot be changed later. To verify if PSE FW is loaded properly, the user could enable PchPseShellEnabled flag and the log will be printed at PSE UART 2. For further info please refer to doc #611825 (for HW overview) and #614110 (for PSE EDS). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-21soc/intel/ehl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
The only option to make HECI1 function disable on Elkhart Lake SoC platform is using SBI under SMM mode. List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I76c625e6221fdef1343599e7dbc7739caa91bf98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
2022-01-19soc/intel/common/cpu: Use SoC overrides to get CPU privilege levelSubrata Banik
This patch implements a SoC overrides to check CPU privilege level as the MSR is not consistent across platforms. For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151. BUG=b:211573253, b:211950520 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I515f0a3548bc5d6250e30f963d46f28f3c1b90b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-10src/soc/intel: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: I2ca3a7487cbe75f9bec458f4166378a07b833bb5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-09soc/intel/{icl,tgl,jsl,ehl}: enable ACPI CPPC entriesMichael Niewöhner
Enable CPPC entries generation, needed for Intel SpeedShift. This can be tested by checking sysfs in Linux: $ grep . /sys/devices/system/cpu/cpu?/acpi_cppc/*perf The output should look like this, while the values may differ: /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf:28 /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_nonlinear_perf:5 /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_perf:1 /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_perf:24 /sys/devices/system/cpu/cpu1/acpi_cppc/highest_perf:28 /sys/devices/system/cpu/cpu1/acpi_cppc/lowest_nonlinear_perf:5 ... Change-Id: I910b4e17d4044f1bf1ecfa0643ac62fc7a8cb51b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
2022-01-05soc/intel: Remove unused <string.h>Elyes HAOUAS
Found using following command: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy(\|memmove(\|memset(\|memcmp(\|memchr(\|strdup(\|strconcat(\|strnlen(\|strlen(\|strchr(\|strncpy(\|strcpy(\|strcmp(\|strncmp(\|strspn(\|strcspn(\|strstr(\|strtok_r(\|strtok(\|atol(\|strrchr(\|skip_atoi(\|vsnprintf(\|snprintf(' -- src/) Change-Id: Iae90ff482f534d8de2a519619c20a019d054e700 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-02soc/intel/{adl,ehl,tgl}: Rename spi_protection_mode to mfg_modeSubrata Banik
Since TGL `spi_protection_mode` bit replaces the previous `manufacturing mode` without changing the offset and purpose of this bit. This patch renames to `manufacturing mode` aka `mfg_mode` to maintain the parity with other PCHs as part of IA-common code. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6d00f72ce7b3951120778733066c351986ccf343 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-12-12soc/intel/elkhartlake: Hook up public microcodeArthur Heymans
Change-Id: I1d975713129d0a7bce823232d225ed17ee28a04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-25soc/intel/elkhartlake: Update SA DIDs TableRick Lee
Update SA table as per latest EDS (Doc no: 601458). Add extra SKUs accordingly. Signed-off-by: Rick Lee <rick.lee@intel.com> Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
2021-11-24soc/intel/elkhartlake: Disable Intel PSE by defaultLean Sheng Tan
Disable PSE loading by default. If left enabled (current default), the EHL coreboot will end up in endless restart loop, due to FSP unable to locate PSE FW image and trigger global reset. However disabling this flag (PchPseEnable) will cause the coreboot to trigger a single reset due to CSE signal (HECI: CSE does not meet required prerequisites). The reason behind this is that FSP need to perform static disabling (power gate) to fully shut down PSE HW, and to do this will need to global reset entire system including CSE. Then PMC will power gate PSE from the start. To avoid this behavior, the best way to disable PSE is to disable via IFWI FIT softstrap (For specific detail can refer to Intel EHL coreboot MR2 release notes). With this, PMC will power gate PSE from the first cold boot and system will boot happily without single reset behavior. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-08soc/intel: drop Kconfig `PM_ACPI_TIMER_OPTIONAL`Michael Niewöhner
Technically, it's not depending on the hardware but on the software (OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A support disabling of the PM Timer, when the respective FADT flag is unset. Thus, drop this guard. For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`. As of this change, new platforms must either implement code for disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such is present. Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22soc/intel/elkhartlake: Add PSE PCI devices into header fileLean Sheng Tan
Since PSE devices could be initialized as either host owned (PCI devices) or PSE owned (will be hidden from coreboot and only visible to PSE interface), add all PSE devices in PCI list header file for future usage. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iaa40cdcb021d05e50504dd85f94e9c021e284d00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58466 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 01:18:26 +0000