summaryrefslogtreecommitdiff
path: root/src/soc/intel/elkhartlake/chip.h
AgeCommit message (Collapse)Author
2023-05-24soc/intel/elkhartlake: Make PCIe root port max payload size configurableMario Scheithauer
The data payload size of PCIe root ports can be set to either 128 (default) or 256 bytes. A bigger payload size can improve PCIe data throughput on the given port. FSP-S provides a parameter to configure this value. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I5798a72adaa8089dda0b4bc12266b5a235ed4aa3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-05-10soc/intel/elkhartlake: Make hard drive type for SATA ports configurableMario Scheithauer
Intel's EHL FSP offers the possibility to select the connected hard drive type to SATA ports. One has the option to choose between HDD ('0' - default) and SSD ('1'). This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: Idb03aff5b6c5df592b47e2f4abe4fe58ac7151ba Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74946 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-21soc/intel/elkhartlake: Make PCIe root port speed limit configurableMario Scheithauer
In cases where there are limitations on the connected device behind the PCIe root port it can be necessary to limit the speed. The FSP parameter 'PcieRpPcieSpeed' allows to set the speed limit. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I9fc24de1682279e4ae4c090147a6ef7995b441bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-02-16soc/intel/elkhartlake/fsp_params.c: wire up remaining ddc paramsMichał Kopeć
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I434c22cd784e24c76bc47aee8728d28255b762db Reviewed-on: https://review.coreboot.org/c/coreboot/+/72405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-01-18soc/intel/elkhartlake: Use common gpio.h includeDinesh Gehlot
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes with the common gpio.h which includes soc/gpio.h which includes intelblocks/gpio.h which includes soc/gpio_defs.h. BUG=b:261778357 TEST=Able to build and boot. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I73bac9560d0ff315d6fe6f4efc3ee9011f77c660 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72036 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-11soc/intel/elkhartlake: Provide a way to enable real-time tuningWerner Zeh
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve real-time behaviour of the SoC (see Intel doc #640979). It describes, amongst knobs for the OS, a couple of firmware settings that need to be set properly to reduce latencies in all the subsystems. Things like clock and power gating as well as low power states for peripherals and buses are disabled in this scenario. This patch takes the mentioned UEFI parameters from the guide and translates them to FSP-M and FSP-S parameters. In addition, a chip config switch guards this tuning which can be selected on mainboard level if needed. When this real-time tuning is enabled, the overall system performance in a real-time environment can be increased by 2-3%. Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-01-11soc/intel/elkhartlake/chip.h: Include types.h instead of stdint.hWerner Zeh
As the used 'bool' type is defined in stdbool.h, include types.h (instead of stdint.h) which includes all needed header files. Change-Id: I3f75776575a7a5f70484411b9f3458530f706ec4 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71790 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10soc/intel/elkhartlake: Make SATA speed limit configurableWerner Zeh
In cases where there are limitations on the mainboard it can be necessary to limit the used SATA speed even though both, the SATA controller and disk drive support a higher speed rate. The FSP parameter 'SataSpeedLimit' allows to set the speed limit. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-25soc/intel/eklhartlake: Provide an option to disable the L1 prefetcherWerner Zeh
Depending on the real workload that is executed on the system the L1 prefetcher might be too aggressive and will populate the L1 cache ahead with data that is not really needed. In the end, this will result in a higher cache miss rate thus slowing down the real application. This patch provides a devicetree option to disable the L1 prefetcher if needed. This can be requested on mainboard level if needed. Change-Id: I3fc8fb79c42c298a20928ae4912ee23916463038 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68667 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-12soc/intel/ehl: Support maximum memory frequency selectionChristian Gmeiner
Makes it possible to configure the maximum allowed/supported DDR memory frequency on a per mainboard basis. Test - Define maximum memory frequency in mainboard devicetree.cb - Boot into Linux and run 'sudo dmidecode --type 17' to check memory speed - Boot into Linux and run 'phoronix-test-suite benchmark ramspeed' Change-Id: I9e0c7225e2141e675a20b8e3f0dbe8c0b3a29b28 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68097 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-05-21soc/intel/ehl: Provide function to change PHY-to-MAC IRQ polarityMario Scheithauer
EHL MAC side expects a rising edge signal for an IRQ. Based on the mainboard wiring it could be necessary to change the interrupt polarity. This patch provides the functionality to invert a falling edge signal that comes from an external PHY. The inverting can be activated via devicetree parameter. Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-05-17soc/intel/elkhartlake/chip.h: Drop unused membersAngel Pons
Remove devicetree options that aren't used anywhere in the code. Change-Id: I7eace61079e14423325332d277fdda4f986fd133 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64403 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-17soc/intel/elkhartlake: Enable SMBus depending on dev stateAngel Pons
Program the `SmbusEnable` FSP UPD according to the SMBus PCI device's state in the devicetree. This avoids having to manually make sure the SMBus PCI device and the `SmbusEnable` setting are in sync. Change-Id: I275a981f914a55dc57a75e7d436912ff0255a293 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64402 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-25soc/intel/elkhartlake: Add PSE TSN supportLean Sheng Tan
Enable PSE GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Add PSE GBE ACPI devices 3. Refactor PCH GBE FSP-S code and merge it together with PSE GBE code Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-25soc/intel/elkhartlake: Introduce Intel PSELean Sheng Tan
The Intel® Programmable Services Engine (Intel® PSE) is a dedicated offload engine for IoT functions powered by an ARM Cortex-M7 microcontroller. It provides independent, low-DMIPS computing and low-speed I/Os for IoT applications, plus dedicated services for real-time computing and time-sensitive synchronization. The PSE hosts new functions, including remote out-of-band device management, network proxy, embedded controller lite and sensor hub. This CL enables the user to provide the base address of the PSE FW blob which will then be loaded by the FSP-S onto the ARM controller. PSE FW will do the initialization work of PSE controller and its peripherals. The loading of PSE FW should have negligible impact on boot time unless PSE controller could not locate the PSE FW and FSP will attempt to redo PSE FW loading and wait for PSE handshake until it times out. Once PSE controller locate the PSE FW, it will do initialization concurrently by itself with coreboot booting. It also adds PSE related FSP-S UPD settings which enable the setup of peripheral ownership (assigned to the PSE or x86 subsystem) and interrupts. These assignments need to take place at a given point in the boot process and cannot be changed later. To verify if PSE FW is loaded properly, the user could enable PchPseShellEnabled flag and the log will be printed at PSE UART 2. For further info please refer to doc #611825 (for HW overview) and #614110 (for PSE EDS). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-21soc/intel/ehl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
The only option to make HECI1 function disable on Elkhart Lake SoC platform is using SBI under SMM mode. List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I76c625e6221fdef1343599e7dbc7739caa91bf98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
2021-10-12soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner
Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-17soc/intel/{ehl,jsl}: make use of Kconfig options for PRMRR sizeMichael Niewöhner
Migrate the last two platforms to using Kconfig through `get_valid_prmrr_size()` instead of hardcoded values in the devicetree. Change-Id: I93aa177f741ca8b2a2d50fae2515606b96784e83 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-07-17soc/intel/elkhartlake: Expose FIVR config to mainboardLean Sheng Tan
Elkhart Lake provides option to configure FIVR (Fully Integrated Voltage Regulators) via parameters in FSP-S. This CL removes fixed FIVR config values and expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ie1b0e0cc908ba69805dec7682100dfccb3b9d8b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-21soc/intel/elkhartlake: Expose In-Band ECC config to mainboardWerner Zeh
Elkhart Lake provides a feature called "In-Band ECC" which uses a piece of system DRAM to store the ECC information in. There are a few parameters in FSP-M to set this feature up as needed. This patch adds code to expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Change-Id: I7a4953d7b35277de01daff04211450e3d1bd8103 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55668 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/intel/elkhartlake: Update FSP-S FuSa related settingsLean Sheng Tan
Further add initial Silicon UPD settings for FuSa (Functional Safety). Disable all by default, due to FSP binary enable all by default. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I88264ba3e3f9f54ad949c55b230082d1fa289fa4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55342 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/intel/elkhartlake: Update FSP-S PM & Thermal related configsLean Sheng Tan
Further add initial Silicon UPD settings for thermal and power management stuffs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I04ded059c36f18925b7a74c934fef2566c3db8fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/55335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S storage related configsLean Sheng Tan
Further add initial Silicon UPD storage settings: - SATA - SD card - eMMC Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Id4145fcf156756a610b8a9a705d4ab99fe7b0bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD RP & USB related configsLean Sheng Tan
Further add initial Silicon UPD settings for: - PCIe root ports - USB Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I60afb78a7997b8465dd6318f3abee28f95a65100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55034 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01soc/intel/elkhartlake: Update FSP-S UPD LPSS related configsTan, Lean Sheng
Add Silicon upd settings for LPSS (GSPI/UART/I2C). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-30soc/intel/elkhartlake: Update FSP-M UPD related configsTan, Lean Sheng
Upload the FSP-M UPD configs. This CL also updated the chip.h and devicetree.cb with the relevant variables and configs. This CL also updated the GPIO related settings (PMC & SD card) in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If6321064b37535b390cf3dd7c41a719c598a0cd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-04-21soc/intel/alderlake: rename CONFIG_MAX_PCIE_CLOCKS to CONFIG_MAX_PCIE_CLOCK_SRCRizwan Qureshi
CONFIG_MAX_PCIE_CLOCKS renamed to MAX_PCIE_CLOCK_SRC to make it clear that this config is for the number of PCIe Clock sources available which is different from PCIe clock reqs. This is more relevant in alderlake, as the number clock source and clock reqs differ. However since this is a better name, renaming it throughout the soc/intel tree. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I747c94331b68c4ec0b6b5a04149856a4bb384829 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52194 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03soc/intel: Retype `CnviBtAudioOffload` devicetree optionAngel Pons
The `FORCE_ENABLE` and `FORCE_DISABLE` names do not match what FSP UPDs say, and can be confused with the `PchHdaTestPowerClockGating` UPD. Replace the enum with a bool, and drop the confusing names. Note that the enum for Ice Lake was incorrect, but no mainboards used the option. Change-Id: I2c9b4c6a2f210ffca946ca196299fa672a06ccc7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51154 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18soc/intel/common: Move L1_substates_control to pcie_rp.hEric Lai
L1_substates_control is common define. Move out of soc level. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I54574b606985e82d00beb1a61cce3097580366a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/elkhartlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ia928c4bbddd1c160228a9af8faf5d4be787f73f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-09-08soc/intel/elkhartlake: Do initial SoC commit till ramstageTan, Lean Sheng
Clone entirely from Jasperlake List of changes on top off initial jasperlake clone 1. Replace "Jasperlake" with "Elkhartlake" 2. Replace "jsl" with "ehl" 3. Replace "jsp" with "mcc" 4. Rename structure based on Jasperlake with Elkhartlake 5. Clean up upd override in fsp_params.c will be added later 6. Sort #include files alphabetically as per comment 7. Remove doc details from espi.c until it is ready 8. Remove pch_isclk & camera clocks related codes 9. Add new #define NMI_STS_CNT & NMI_EN as per comment Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 12:12:59 +0000