| Age | Commit message (Collapse) | Author |
|---|
|
Use same log level as print_num_status_bits to make sure the
status bits are properly prefix and the newline is added.
Change-Id: Ib33798eec7cba601d0d49646c5fc429de5268417
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65715
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution")
Resolves:
https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/
5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing
the value at '_estack' into %esp rather than the address '_estack'.
Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=None
TEST=None
Change-Id: I7a4081f0f57e0faa968ad142debdc40a9e26dc9b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65690
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 0x7d55 as another ID for Meteor Lake graphics controllers.
TEST=Boot with MTL silicon to check coreboot log for DID2
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iea01f6d4f2469fc0eeac73a3f1c4b9af1f39463c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
The comment indicates CSE's data partition is placed after BP2. But, it
was place after BP1.So, the patch updates the comment to reflect the
CSE Region layout correctly.
TEST=Build the code for Brya and didn't notice any compilation errors
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ic871e2e395de17157f4f526064a26bfad538707f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When compressed ME RW blobs are used for CSE FW update, it has to be
loaded into memory to decompress. So perform CSE FW update in ramstage.
Alder Lake-N based nissa boards use compressed ME RW blobs to save on
SPI flash size. Enable CSE FW update in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW update on nivviks and verify upgrade/downgrade
works.
Change-Id: Ide9471146d186dca11fb020e5006eeaa01442669
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I2d99523647dfb43265db8f2701b525afd1870fc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
In ADL-N, cse_fw_sync is done in ramstage. Compile debug_feature.c in
ramstage to fix build error.
BRANCH=firmware-brya-14505.B
Change-Id: I0118b024fce4781cf6008b1c0b416e409fc52065
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63979
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the CSE FW update flow, update is triggered when there is a mismatch
in CSE versions. CSE RW blob is directly mapped from SPI flash, hashed,
compared and then the CSE RW region is updated. However, in the case of
compressed blobs, we cannot directly map the blobs from SPI. It needs to
be decompressed before the hash is calculated and compared. Add a check
for compressed blobs and figure out whether it needs to be directly
mapped from SPI or loaded into memory allocated for file in CBMEM, with
the provided CBMEM ID.
BRANCH=firmware-brya-14505.B
Change-Id: I3bc7708c95272e98702bc25b2334e6e64a93da8a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CSE FW sync is currently performed in romstage, when uncompressed ME_RW
blobs are used. When compressed blobs are used, this has to be done in
post-RAM stages. Add Kconfigs to describe when the CSE FW sync will be
performed, in romstage or in ramstage.
BRANCH=firmware-brya-14505.B
Change-Id: Iac37aaa5ede5e1cd2d76a58ce2db9cb5b8f42398
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65366
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I8e8b9ec6ae82de7d7aa2302097fc66f47b782323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65117
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce three functions:
- new_padbased_table:
Returns the gpio pad number based table
- gpio_padbased_override:
Must pass the table with padbased table
- gpio_configure_pads_with_padbased:
Must pass the table with padbased table, will skip configures the
unmapped pins by check pad and DW0 are 0.
Some boards may have complex, SKU-based GPIO programming. This
patch provides for a simpler pattern of controlling overrides of
GPIO programming by providing a table of pad configuration indexed
by pad number. Thus, pad state can be overwritten over multiple
overrides until the final takes place, and then all GPIO
programming is performed at once.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I8b99127b73701b50a7f2e051dee9d12c9da9b741
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64712
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the Intel top_swap feature into the intel/common Kconfig file.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3ed649aaeb51c2250be9473114c17d3f191d2c38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add Meteor Lake SA device ID 0x7d14 (4+8, 15W).
BUG=b:224325352
TEST=Able to build MTL SoC and verified SA DID is now shown proper.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I051a40136ed89e837945bf4569c77d2a80375ed6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65111
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures all APs finish the task and continue
before_post_cpus_init() if coreboot decides to perform multiprocessor
initialization using native coreboot drivers instead of using
FSP MP PPI implementation.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3b76974ab19323201bf1dca9af423481a40f65c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65173
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures to perform core PRMRR sync if SoC decides to
perform MP Init using coreboot native implementation.
Also, implement a function to allow calling `init_core_prmrr()`
for all CPUs from `before_post_cpus_init()`.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9b6222c98ff278419fa8411054c0954689e1271e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64978
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into `intel_reload_microcode() function to load
second microcode patch after BIOS Done bit is set and before
setting the BIOS Reset CPL bit.
Also, remove redundant microcode reloading debug print.
BUG=b:233199592
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icb3fcfd7ef5478be0a40f8f1358f55c0247b4914
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65157
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch renames identifiers (macros, function and structure names) in
the basecode/debug/debug_feature.c to generic names so that they can be
used to control the features which may have to be controlled either
during pre and post memory.
Currently, the naming of identifiers indicate that it meant to control
the features which can be controlled during only pre-memory phase.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I53ceb25454027ab8a5c59400402beb6cc42884c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use Intel common SoC SPI code for Denverton refactor
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: Ic1d57c6b348adb934785b0e2bec4e856f0bf8d77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61014
Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
see https://review.coreboot.org/c/coreboot/+/65072/8
BUG=b:149830546
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage' builds correctly.
Tested on an Anahera device which successfully boots to ChromeOS
with kernel version 5.10.109-15688-g857e654d1705.
Change-Id: I80df95f9146934d6a2d23e525c22be3a9a7e2b9f
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64677
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Warnings are treated as errors in build.
UBAR is declared inside APRT method which throws warning as follows
"Static OperationRegion should be declared outside control method"
Move UBAR outside APRT method to fix warning.
TEST=build brya with following changes without any warnings
1. Select ACPI_CONSOLE
2. Include <soc/intel/common/acpi/acpi_debug.asl>
3. Add APRT function in any asl file.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I40c676fd0bbd529bcbded18dd248b918f47324d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
This patch implements API to sync between core
PRMRR(Processor Reserved Memory Range Registers).
Read PRMRR base and limit value from BSP and apply it on the
rest of the cores.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I720669139429afc3d8c8d15c0ce15f1524f22e4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
In x86 processor as per Software Developer's manual there are 2 ways to
get CPU topology by querying the processor. BIOS can use CPUID
instruction using CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) as input or
CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F) as an input. Both will return
valid CPU topology data.
While CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) returns data related to number
of threads, core and package, CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F)
provides more granular information regarding Die, package etc.
coreboot uses V2 to in order to query and return CPU topology data as of
now since that's the highest instruction of CPUID which is supported,
there is a mismatch in the way FSP processes the data.
FSP queries coreboot MP services to get CPU topology data which uses
structure which is either compatible with CPUID_EXTENDED_CPU_TOPOLOGY or
CPUID_EXTENDED_CPU_TOPOLOGY_V2. Since coreboot returns V2 data in
structure which is expecting data for CPUID_EXTENDED_CPU_TOPOLOGY, there
is hang observed on ADL_N CPUs.
To solve this problem coreboot should assign CPUID_EXTENDED_CPU_TOPOLOGY
data to processor_info_buffer->Location structure so remove use of
CPUID_EXTENDED_CPU_TOPOLOGY_V2
Ref EDK2 code: https://github.com/tianocore/edk2/tree/edk2-stable202202
Files:
MdePkg/Include/Protocol/MpService.h#L182
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2127
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2120
Ref doc: Software Developer’s Manual volume 3 CH 8.9
BUG=b:220652104
TEST=Build and boot ADL-N RVP with debug FSP and verify CPU topology
value and observe system boots (no hang).
Change-Id: I1e6832fb03fcc59d33df0ba1664019727185d10a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel LPC devices have generic and fix IO decode ranges. This CL is
smarter about using generic ones, by using the fixed ones first.
Change-Id: Ifd98bcc639ee08d068956a33b0e12cc70211ca2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65097
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an option for CPU programming where coreboot
expected to load second microcode patch after BIOS Done bit is set
and before setting the BIOS Reset CPL bit.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I426b38cb1200e60398bc89515838e49ce0a98f06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64836
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. add timeout for root port detection and pass to FSP.
2. add 'slot implemented' flag and pass to FSP.
3. PcieRpSlotImplemented needs to be set when the root port is set to
hotplug. There is an assertion in FSP checking this.
4. PcieRpSlotImplemented is updated only when it is built-in as it is
default to slot implemented in FSP.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I13feb1d2d67eaba634a3e700685132fba39e1525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch creates a helper function named `initialize_microcode()`
to load microcode and ease for all function to peform loading
microcode using this helper function.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7155fc2da7383629930ce147a90ac582782fa5ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
As per Intel Processor EDS, BIOS_DONE bit needs to be set on
all CPUs via MSR.
Also, implement a function to perform any SoC recommended CPU
programming prior to post CPUs init. At present calling
`cpu_soc_bios_done()` for all CPUs from `before_post_cpus_init()`.
Note: It is expected that `before_post_cpus_init()` will be
extended with other CPU programming recommendations in follow up
patches, for example: reload microcode patch etc.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8066cd724c9f15d259aeb23f3aa71a2d224d5340
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch implements heci_init() API that perform initialization of
all HECI devices as per MAX_HECI_DEVICES config.
BUG=none
TEST=Able to build and boot google/taeko with this change. No CSE
error observed with `heci_init()` called from romstage.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia25e18a20cc749fc7eee39b0b591d41540fc14c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch fixes the return type for `devfn` variable inside
heci_set_to_d0i3(). `PCI_DEVFN` macro returns `unsigned int`
instead of `pci_devfn_t`.
TEST=Able to build and boot to ChromeOS without any failure.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib3a575aa7d71cbe6932e823917b57c5558387433
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch renames heci_init() to cse_init() as HECI initialization
should have a bigger scope than just initializing the CSE
(a.k.a HECI1 alone).
BUG=none
TEST=Able to build and boot google/taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic7edd55ccdcd70b244615fa06f81803a0ae6ce80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This patch removes the MTL CNVi DIDs macros from IA common code and is
added into the generic wifi driver.
As per Intel Connectivity Platform BIOS Guide, Connectivity Controller
IP for MTL-P is `Magnetar` and supported CRF is `Typhoon Peak 2`.
Previously Garfield Peak DIDs for Alder Lake SoC also added similarly
to generic wifi drivers.
BUG=b:224325352
TEST=Able to build and boot on MTL emulator.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib98762749c71f63df3e8d03be910539469359c68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
gpio_configure_pad function gets called for most of the GPIO
configuration for all the boards. This function is not handling NULL
pointers properly which can cause exception in CPU.
This patch fixes the handling and function is able to return early
in case the NULL pointer is passed or any subsequent child function
calls return NULL.
BUG=None
BRANCH=None
TEST=Compilation works fine for all Alder Lake boards.
Change-Id: I97fad72cdd92f70c7c5e6fdd23fbecf535a6e388
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch brings the feature of disabling RAPL to common code. It
replaces the current solution for APL and EHL.
For special case if RAPL disabling is only working via changes in MCHBAR
a new config switch was introduced.
Test: Boot mc_apl4/5 with this patch and ensure that the
relevant bits in MSR 0x610 are the same as before the
patch.
Change-Id: I2098ddcd2f19e3ebd87ef00c544e1427674f5e84
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch implements a SoC overrides to set CPU privilege level
as the MSR is not consistent across platforms. For example:
On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4584516102560e6bb2a4ae8c0d036be40ed96990
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
mtrr_use_temp_range is a lot smarter than the plain set_var_mtrr. It
will compute a new optimal solution with the temp ranges included
while also taking care of the cleanup before loading the payload/s3
resume.
Change-Id: I283ba07fc12c410be39dfdc828657598237247c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63550
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch uses coreboot error codes instead of uint8_t data type in the
pre_mem_debug_init function.
TEST=build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I957ff764900cb789bf2aacf0472dcb281f48af07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Move the Kconfig option `FSP_HYPERTHREADING` to common Intel Kconfig so
that it can be reused by other SoCs. Since not all SoCs support
hyperthreading, make it conditional on `HAVE_HYPERTHREADING`. SoCs
supporting hyperthreading need to select it so that `FSP_HYPERTHREADING`
is available.
Change-Id: I892d48b488cbf828057f0e9be9edc4352c58bbe7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The patch skips sending DISCONNECT IPC command to PMC if system resumes
from S3.
coreboot notice DISCONNECT IPC command getting timedout during S3
resume if system has AC connected behind Type-C hub. This impacts
system resume time. Please refer TA# 730910 for more information.
coreboot need not send the DISCONNECT IPC command when system resumes
from S3 state.
TEST=Verified system boots to OS and verfied below tests on Gimble
1. coreboot doesn't send the DISCONNECT during S3 resume
2. After S3 resume, system detects the pen drive with Superspeed
3. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
3. System sends IPC commands when system boots from S0 or S5.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I6ad006ae8677919c7dfeca8eec0af11454a2e89d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
All targets now use cbmem for the BERT region, so the implementation can
be common.
This also drops the obsolete comment about the need to have bert in a
reserved region (cbmem gets fixed to be in a reserved region).
Change-Id: I6f33d9e05a02492a1c91fb7af94aadaa9acd2931
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the boot flash MMIO window to the resources to report this region as
reserved to the OS. This is done to stay consistent with the reserved
memory ranges by coreboot and make the OS aware of them.
As x86 systems preserves the upper 16 MiB below 4G for BIOS flash
decoding use the complete window for reporting independent of the
actually used SPI flash size. This will block the preserved MMIO window.
Change-Id: Ib3a77e9233c3c63bad4de926670edb4545ceaddf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
If the SPI controller is hidden from the OS (which is default on Apollo
Lake) then OS has no chance to probe the device and therefore can not be
aware of the resources this PCI device occupies. If the OS needs to move
some resources for a reason it can happen that the new allocated window
will be shadowed by the hidden PCI device resource and hence causing a
conflict. As a result this MMIO window will be inaccessible from the OS
which will cause issues in applications. For instance on Apollo Lake
this causes flashrom to stop working.
This patch adds a SSDT extension for the PCI device if it is hidden from
the OS and reports the occupied resource via ACPI to the OS. For the
cases where the device is hidden later at coreboot runtime and therefore
is not marked as hidden in the PCI device itself a Kconfig switch called
'FAST_SPI_GENERATE_SSDT' is introduced. It defaults to 'no' and can be
set from SOC code to override it.
Since there is no defined ACPI ID for the fast SPI controller available
now, the generic one (PNP0C02) is used.
Test: Boot mc_apl4 and make sure flashrom works again.
Change-Id: Ia16dfe6e001188aad26418afe0f04c53ecfd56f1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There are efforts to have bootflows that do not follow a traditional
bootblock-romstage-postcar-ramstage model. As part of that CBMEM
initialisation hooks will need to move from romstage to bootblock.
The interface towards platforms and drivers will change to use one of
CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called
in the first stage with CBMEM available.
Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Reuse existing SMBus code from southbridge/intel/common/smbus_ops.h.
Change-Id: Iea4f6886bb49590f7f96abbfbe631ac9d4dda902
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64432
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are two APL specific config switches for RAPL and min. cpu clock
(APL_SKIP_SET_POWER_LIMITS, APL_SET_MIN_CLOCK_RATIO). These switches
could be used in future in other CPU platforms. Move them to common code
instead of having them just for one SOC.
Test: Make sure that the clock ratio (MSR 0x198) and the RAPL settings
(MSR0x610) do not change with this patch applied on mc_apl{1,4,5}
mainboard.
Change-Id: I3d63d1b9b6c96586a3c20bf8c1d8001b1d7c4bed
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
Change-Id: I39e655dec2314a672ea63ba90d8bb3fc53bf77ba
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
Starting with Meteor Lake SoC, the PCR/DMI interface to program GPMR
is replaced with IOC (I/O Cache), hence, this patch implements IOC
driver to support that migration.
Reference: 643504 MTL FAS section 7.5.2
TEST=Build and boot to OS for TGL RVP and MTL PSS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I768027c2ca78310c03845f70f17df19dc8cd0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63198
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fast SPI controller (usually handling the boot NOR flash) is a
different controller type than the generic SPI controllers as it
provides access to the boot flash and usually is not used for generic
SPI slave connections.
Though there is common code for the fast SPI controller it currently do
not uses the PCI driver structure. This patch adds the PCI driver
envelope to the fast SPI driver and moves Apollo Lake as the first
platform to this driver.
Change-Id: I31bf39ec1c622db887dec9ca8623a7f282402849
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The "No memory dimm at address" line in get_spd_sn and get_spd fucntion
have different format of SPD address.
get_spd_sn shows a 8-bit address format but get_spd shows a 7-bit
address format when there is no DIMM connected. It can be confusing
when debugging.
Change-Id: I46a006f4024b12d27ae0a933b7c40515034d5d64
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There were 3 different functions in gpio.c file which used to
get gpio group and pin information separately through function
calls.
Since these are static function, we can modify argument to
pass group and pin information from parent/calling function.
This will reduce redundant work of getting information 3 times
separately.
BUG=None
BRANCH=None
TEST=code compiles and correct information is passed to functions.
Check by using pin information on Brya.
Change-Id: Ie92be8c22838ebc5e831be58545e2023eecfff24
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since coreboot locks GPIO registers after GPIO configuration, OS is not
able to program GPE_EN register to program wake events. This causes
the issue of event not getting logged into event log (since GPE_EN bit
is not set).
GPE_EN register programming is required for the GPIO pins which are
capable of generating SCI for the system wake. Elog mechanism relies
on GPE_EN and GPE_STS bit to log correct wake signal.
This patch add supports to program GPE_EN register before coreboot locks
the GPIO registers. Note that coreboot will only program GPE_EN bits for
GPIO capable of generating SCI.
This will help resolve issue where we don't see wake event GPIO in event
log.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Compile code for Brya and see GPE_EN bits set from the kernel console
Change-Id: I27e525f50c374c2cc9675e77eaa7774683a6e7c2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
coreboot needs to set GPE_EN bit for the GPIOs which are wake capable
from s0ix/sleep. Due to GPIO locking mechanism, coreboot/OS will not
be able to write GPE_EN register post GPIO has been locked.
This patch adds support in SoC code to provide correct offset for
GPE_EN and GPE_STS registers to the common code.
Plan is to use this offsets to set GPE_EN bits before GPIO locking
in coreboot which will be part of subsequent CL.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Check if code compiles for Brya and correct offset values are printed.
Change-Id: I6b813b30b8b360f8eccbf539b57387310e380560
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
By using mp_run_on_all_cpus_synchronously to run APs MTRR init, it
gurantees the BSP will run post_cpus_add_romcache until all APs finishes
_x86_setup_mtrrs task.
BUG=b:225766934
TEST=Test on redrix and found the MTRR race condition on AP/BSP is gone.
Change-Id: I1fd889f880a0c605e6c739423a434d2adbc12d26
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Change-Id: Ib795f25abe5bbd95555b68af39c637d7c93aa819
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64251
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cf9_reset.h>' -- src/) <(git grep -l 'RST_CNT\|FULL_RST\|RST_CPU\|SYS_RST\|do_system_reset\|do_full_reset\|cf9_reset_prepare\|system_reset\|full_reset' -- src/) |grep "<"
Change-Id: I093d8412e14ce81b462fb9a7ccb3a2a93ae760a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I25d112941db8214a7e450de5fb512ef8c2c5f5e2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I2b02bcecda2257f191c0d0fc9935b1eb673ab3d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I2f89d11c163f56163d5c361a3edad14418bf9fa7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Implement sub-function 1 (Get Device Constraints)
of the Low Power S0 Idle Device-Specific Method (_DSM).
This provides a way in which to describe various devices required
D-states to enter LPM (S0ix). The information can be used to help
in diagnostics and understanding of S0ix entry failure.
Values were derived from Intel document 595644 (rev 0.45) and
the ADL FSP sample ASL.
This implementation adds support for ADL. Other SoC's could be
ported to be included as well. If they aren't, they will default
to the existing behavior of a single hardcoded device to ensure
compatibility with Windows.
TEST=Built and tested on brya by verifying SSDT contents
Change-Id: Ibe46a0583c522a8adf0a015cd3a698f694482437
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
Change-Id: I41bbdabf7b846386651e64f4afb5b7b9fb38e1cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
A few ACPI device path name handlers are missing. Add handling
to ensure that these names are returned during acpi_device_path()
calls.
TEST=Built and tested on brya
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I37d6dd5df921c931af72dd469c3f4067c61b0df3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch sends an IPC to PMC to inform about PCI enumeration.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I77d428f9501feaccab8bb431090d10ce8d3af9b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
pmc_prev_sleep_state() isn't handling the case where acpi_sleep_from_pm1()
returns ACPI_S4. Pass that value along so it can get set as a
prev_sleep_state. Without this, consumers see prev_sleep_state as 0
and always treat resume as a cold boot. With this, consumers can
correctly do behavior specific to S4 resume, like skipping the
disconnect IPC command to the PMC on Alderlake systems.
BUG=b:230031158
TEST=Resume from S4 on Primus4es
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I3fb3dc428a749db80293e51a04a2096514a7b689
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move ASL POST code declarations into a common file to avoid redundancy.
Also, provide a dummy implementation when `POST_IO` is not enabled, as
the value of `CONFIG_POST_IO_PORT` can't be used.
Change-Id: I891bd8754f10f16d618e76e1ab88c26164776a50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Notify IOM to enable or disable TBT displays on S0ix exit and entry
respectively.
Change-Id: I9f49d8e30fe8e8b335128e53d71ef902328f031a
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add display on and off notifications which call mainboard hooks if
present. This allows to handle some board specific functions in user
absence or presence (when display goes off from inactivity or on from
activity).
TEST=Use Display on/off notification on Clevo NV41 to tell EC about
laptop inactivity. It is necessary to properly handle S0ix entry (stop
the fans and start blinking the power led).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ie80f631ecffa74467ab6d6162e552ba977f7e3f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch avoids sending the `Get Boot perf` command while booting
with CSE device hidden.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I498c14d144295a9bc694b90060ca74c66966d65e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This patch enforces disabling of the CSE device if CSE stays in
SOFT TEMP DISABLE state. The recommendation is to make CSE function
disable to avoid receiving any CSE commands from the OS layer.
BUG=b:228789015
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I77c254195895a93a5606adee8b6f43d8b7100848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch removes redundant DISABLE_HECI1_AT_PRE_BOOT config check for
heci1_disable(), once by caller (from various SoC) and again inside the
callee (heci1_disable) function.
As all callers of heci1_disable() function are doing
DISABLE_HECI1_AT_PRE_BOOT config enabled check, hence, the second check
inside the callee can be dropped.
BUG=b:228789015
TEST=Able to build and boot google/redrix with this change. CSE PCI
device is getting function disabled upon selecting
DISABLE_HECI1_AT_PRE_BOOT from SoC config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I47d7a9989e355987618d089f79c3340fcf4953ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use PCIEXBAR_PCIEXBAREN instead of constant value(1)
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ica9e8162945da0a714822c37753914575c26024e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
`sa_lockdown_cfg` function ensures locking the PAM register hence,
skip dedicated calling into `sa_lock_pam()` from the SoC
`finalize.c` file. Dropped sa_lock_pam() call from ADL/CNL/EHL/JSL
and TGL.
Additionally, this patch enforces SA lockdown configuration for SKL
and ICL as well.
BUG=b:211954778
TEST=Able to build google/brya with these changes.
> localhost ~ # lspci -xxx | less
00:00.0 Host bridge: Device 8086:4601 (rev 04)
Bit 0 for all PAM registers a.k.a, PAMx_0_0_0_PCI.LOCK bit is set
(meaning locked).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd464d2507393ed0c746eb1fbd10e36092ed5599
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit 211be9c03 (soc/intel/cmn/{block, pch}: Migrate GPMR driver)
drops `dmi` prefix from `lockdown_cfg` function name.
This patch adds the `gpmr` prefix to the lockdown_cfg function to make
it meaningful.
BUG=b:211954778
TEST=Able to build google/brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idaa0e089131ab125348e2430355041c4ee7971de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
There is a bug floating around where communciation with the PMC fails
after transitions through S3/S4/S5. This CL does not address that issue.
However in working with error cases presented by a failing PMC, we're
forced into an early return in read_pmc_lpm_requirements(), which sets
up _DSM buffers in the SSDT for the PEP device.
The function itself returns void, so the error is swallowed regardless.
However returning early is not the appropriate action because it causes
the size of the buffer written into the _DSM method to change. This causes
the SSDT to change size and layout across an S3 or S4 transition, which
results in mayhem in the kernel, as the kernel is not expecting these
tables to change out from under it.
Instead of returning early, it's better to simply print the error and
keep going, attaching a zeroed out buffer for the substate requirements.
This results in an empty requirements mask for all states. From what I
can see in the kernel this is no more broken than today's behavior, as
this buffer seems to only be used for printing a debugfs file.
In fact in this particular case the kernel doesn't even notice, as this
buffer is copied out at boot, and not refreshed at resume.
BUG=b:230031158
TEST=hibernate and resume on Primus4ES
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: Ibe35d50b350b1b96dea313dfcbd00745970c16ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch adds support to control CSE Lite firmware update dynamically.
In order to disable the CSE firmware update functionality, offset 0xf00
in the coreboot binary be updated with 0x1.
Run below command on the binary to disable CSE firmwar update
printf '\x01' | dd of=image-brya4es.serial.bin bs=1 seek=3840 count=1
conv=notrunc
BUG=b:153410586
TEST=Verified CSE firmware update functionality is not getting
triggered after updating the offset:0xF00 in the coreboot binary.
........................ CB Logs ......................................
[DEBUG] prev_sleep_state 5
[DEBUG] cse_lite: Number of partitions = 3
[DEBUG] cse_lite: Current partition = RW
[DEBUG] cse_lite: Next partition = RW
[DEBUG] cse_lite: Flags = 0x3
[DEBUG] cse_lite: RO version = 16.0.15.1752 (Status=0x0, Start=0x2000,
End=0x19bfff)
[DEBUG] cse_lite: RW version = 16.0.15.1752 (Status=0x0,
Start=0x205000, End=0x439fff)
rt_debug: pre_mem_debug.cse_fw_update_disable=1
[DEBUG] Boot Count incremented to 956
.......................................................................
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I9f234b142191eb83137d5d83f21e890e1cb828ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The patch fixes the buggy code which tries to access the Descriptor
Region. The existing code doesn't use correct APIs to access the
Descriptor Region. Hence, error message is getting displayed during
the boot.
BUG=b:229003612
TEST=Build and verify no errors seen while accessing the Descriptor
Region.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib144cc0845b7527e5a3032529b0802f961944b87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Found using:
diff <(git grep -l '#include <acpi/acpi.h>' -- src/) <(git grep -l 'SLP_EN\|SLP_TYP_SHIFT\|SLP_TYP\|SLP_TYP_S\|ACPI_TABLE_CREATOR\|OEM_ID\|ACPI_DSDT_REV_\|acpi_device_sleep_states\|ACPI_DEVICE_SLEEP\|RSDP_SIG\|ASLC\|ACPI_NAME_BUFFER_SIZE\|COREBOOT_ACPI_ID\|acpi_tables\|acpi_rsdp\|acpi_gen_regaddr\|ACPI_ADDRESS_SPACE\|ACPI_FFIXEDHW_\|ACPI_ACCESS_SIZE_\|ACPI_REG_MSR\|ACPI_REG_UNSUPPORTED\|ACPI_HID_\|acpi_table_header\|MAX_ACPI_TABLES\|acpi_rsdt\|acpi_xsdt\|acpi_hpet\|acpi_mcfg\|acpi_tcpa\|acpi_tpm2\|acpi_mcfg_mmconfig\|acpi_hmat\|acpi_hmat_mpda\|acpi_hmat_sllbi\|acpi_hmat_msci\|acpi_srat\|ACPI_SRAT_STRUCTURE_\|acpi_srat_lapic\|acpi_srat_mem\|acpi_srat_gia\|CPI_SRAT_GIA_DEV_HANDLE_\|acpi_slit\|acpi_madt\|acpi_lpit\|acpi_lpi_flags\|acpi_lpi_desc_type\|ACPI_LPI_DESC_TYPE_\|acpi_lpi_desc_hdr\|ACPI_LPIT_CTR_FREQ_TSC\|acpi_lpi_desc_ncst\|acpi_vfct_image_hdr\|acpi_vfct\|acpi_ivrs_info\|acpi_ivrs_ivhd\|acpi_ivrs\|acpi_crat_header\|ivhd11_iommu_attr\|acpi_ivrs_ivhd_11\|dev_scope_type\|SCOPE_PCI_\|SCOPE_IOAPIC\|SCOPE_MSI_HPET\|SCOPE_ACPI_NAMESPACE_DEVICE\|dev_scope\|dmar_type\|DMAR_\|DRHD_INCLUDE_PCI_ALL\|ATC_REQUIRED\|DMA_CTRL_PLATFORM_OPT_IN_FLAG\|dmar_entry\|dmar_rmrr_entry\|dmar_atsr_entry\|dmar_rhsa_entry\|dmar_andd_entry\|dmar_satc_entry\|acpi_dmar\|acpi_apic_types\|LOCAL_APIC,\|IO_APIC\|IRQ_SOURCE_OVERRIDE\|NMI_TYPE\|LOCAL_APIC_NMI\|LAPIC_ADDRESS_\|IO_SAPIC\|LOCAL_SAPIC\|PLATFORM_IRQ_SOURCES\|LOCAL_X2APIC\|GICC\|GICD\|GIC_MSI_FRAME\|GICR\|GIC_ITS\|acpi_madt_lapic\|acpi_madt_lapic_nmi\|ACPI_MADT_LAPIC_NMI_ALL_PROCESSORS\|acpi_madt_ioapic\|acpi_madt_irqoverride\|acpi_madt_lx2apic\|acpi_madt_lx2apic_nmi\|ACPI_DBG2_PORT_\|acpi_dbg2_header\|acpi_dbg2_device\|acpi_fadt\|ACPI_FADT_\|PM_UNSPECIFIED\|PM_DESKTOP\|PM_MOBILE\|PM_WORKSTATION\|PM_ENTERPRISE_SERVER\|PM_SOHO_SERVER\|PM_APPLIANCE_PC\|PM_PERFORMANCE_SERVER\|PM_TABLET\|acpi_facs\|ACPI_FACS_\|acpi_ecdt\|acpi_hest\|acpi_hest_esd\|acpi_hest_hen\|acpi_bert\|acpi_hest_generic_data\|acpi_hest_generic_data_v300\|HEST_GENERIC_ENTRY_V300\|ACPI_GENERROR_\|acpi_generic_error_status\|GENERIC_ERR_STS_\|acpi_cstate\|acpi_sw_pstate\|acpi_xpss_sw_pstate\|acpi_tstate\|acpi_lpi_state_flags\|ACPI_LPI_STATE_\|acpi_lpi_state\|acpi_upc_type\|UPC_TYPE_\|acpi_ipmi_interface_type\|IPMI_INTERFACE_\|ACPI_IPMI_\|acpi_spmi\|ACPI_EINJ_\|ACTION_COUNT\|BEGIN_INJECT_OP\|GET_TRIGGER_ACTION_TABLE\|SET_ERROR_TYPE\|GET_ERROR_TYPE\|END_INJECT_OP\|EXECUTE_INJECT_OP\|CHECK_BUSY_STATUS\|GET_CMD_STATUS\|SET_ERROR_TYPE_WITH_ADDRESS\|TRIGGER_ERROR\|READ_REGISTER\|READ_REGISTER_VALUE\|WRITE_REGISTER\|WRITE_REGISTER_VALUE\|NO_OP\|acpi_gen_regaddr1\|acpi_einj_action_table\|acpi_injection_header\|acpi_einj_trigger_table\|set_error_type\|EINJ_PARAM_NUM\|acpi_einj_smi\|EINJ_DEF_TRIGGER_PORT\|FLAG_PRESERVE\|FLAG_IGNORE\|EINJ_REG_MEMORY\|EINJ_REG_IO\|acpi_einj\|acpi_create_einj\|fw_cfg_acpi_tables\|preload_acpi_dsdt\|write_acpi_tables\|acpi_fill_madt\|acpi_fill_ivrs_ioapic\|acpi_create_ssdt_generator\|acpi_write_bert\|acpi_create_fadt\|acpi_fill_fadt\|arch_fill_fadt\|soc_fill_fadt\|mainboard_fill_fadt\|acpi_fill_gnvs\|acpi_fill_cnvs\|update_ssdt\|update_ssdtx\|acpi_fill_lpit\|acpi_checksum\|acpi_add_table\|acpi_create_madt_lapic\|acpi_create_madt_ioapic\|acpi_create_madt_irqoverride\|acpi_create_madt_lapic_nmi\|acpi_create_madt\|acpi_create_madt_lapics\|acpi_create_madt_lapic_nmis\|acpi_create_madt_lx2apic\|acpi_create_srat_lapic\|acpi_create_srat_mem\|acpi_create_srat_gia_pci\|acpi_create_mcfg_mmconfig\|acpi_create_srat_lapics\|acpi_create_srat\|acpi_create_slit\|acpi_create_hmat_mpda\|acpi_create_hmat\|acpi_create_vfct\|acpi_create_ipmi\|acpi_create_ivrs\|acpi_create_crat\|acpi_create_hpet\|acpi_write_hpet\|generate_cpu_entries\|acpi_create_mcfg\|acpi_create_facs\|acpi_create_dbg2\|acpi_write_dbg2_pci_uart\|acpi_create_dmar\|acpi_create_dmar_drhd\|acpi_create_dmar_rmrr\|acpi_create_dmar_atsr\|acpi_create_dmar_rhsa\|acpi_create_dmar_andd\|acpi_create_dmar_satc\|cpi_dmar_\|acpi_create_\|acpi_write_hest\|acpi_soc_get_bert_region\|acpi_resume\|mainboard_suspend_resume\|acpi_find_wakeup_vector\|ACPI_S\|acpi_sleep_from_pm1\|acpi_get_preferred_pm_profile\|acpi_get_sleep_type\|acpi_get_gpe\|permanent_smi_handler\|acpi_s3_resume_allowed\|acpi_is_wakeup_s3\|acpi_align_current\|get_acpi_table_revision' -- src/) |grep "<"
Change-Id: Ibc5d5883d9ec6ee55797bd36178af622d08e4f9b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
This patch implements the required operations to perform prior to
booting to OS using coreboot native driver when platform decides
to skip FSP notify APIs i.e. Post PCI Enumeration.
The smbus `.final` operation ensures locking the TCO register when
coreboot decides to skip FspNotifyApi() calls.
BUG=b:211954778
TEST=Able to build google/brya with these changes and coreboot log with
this code change as below with ADL SoC skip calling into FspNotifyAPIs:
[INFO ] Finalize devices...
[DEBUG] PCI: 00:1f.4 final
> localhost ~ # lspci -xxx | less
00:1f.4 Intel Corporation Alder Lake PCH-P SMBus Host Controller
(rev 01)
Offset 8, Bit 12 a.k.a TCO Lock bit is set (meaning locked).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie945680049514e6c5d797790a381a6946e836926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch implements a helper function to perform LPC registers lock
down configuration.
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS. Verified LPC PCI
configuration register offset 0xDC bits BILD and LE are set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3e49b783e5db0ff40238e6e9259e48a4ecca66f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Typically, the SPIBAR_HSFSTS_W1C_BITS macro is used to clear all HSFSTS
register bit-fields with the W1C attribute.
So far SPIBAR_HSFSTS_W1C_BITS is 1 byte width hence, missed to clear
SAF_CE (bit 8).
This patch expands the `SPIBAR_HSFSTS_W1C_BITS` macro to include
SAF_CE (bit 8).
BUG=b:211954778
TEST=Able to build google/brya with this patch and clear SPI controller
HSFSTS_CTL register Bits 0 to 4 and 8.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifb58cef61118ca967e85226c1cf9db585e9ae4f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Break TPM related Kconfig into the following dimensions:
TPM transport support:
config CRB_TPM
config I2C_TPM
config SPI_TPM
config MEMORY_MAPPED_TPM (new)
TPM brand, not defining any of these is valid, and result in "generic" support:
config TPM_ATMEL (new)
config TPM_GOOGLE (new)
config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE)
config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE)
What protocol the TPM chip supports:
config MAINBOARD_HAS_TPM1
config MAINBOARD_HAS_TPM2
What the user chooses to compile (restricted by the above):
config NO_TPM
config TPM1
config TPM2
The following Kconfigs will be replaced as indicated:
config TPM_CR50 -> TPM_GOOGLE
config MAINBOARD_HAS_CRB_TPM -> CRB_TPM
config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL
config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE
config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM
config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch implements two APIs to perform LPC/eSPI write protect enable/
disable operation using PCI configuration space register 0xDC
(BIOS Controller).
BUG=b:211954778
TEST=Able to build and boot google/redrix to OS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8ce831218025a1d682ea2ad6be76901b0345b362
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch performs additional SPI lock configuration as per Intel
Flash Security Specification.
BUG=b:211954778
TEST=Able to build google/brya and verified all flash security
recommendations are being met.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I922db8b46ac0d0523b91fc5aced88e38c8d8a560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Looks like the `notify_data` struct array idea comes from the FSP 2.0
notify driver, which has a similar struct but with several additional
fields. However, there's no need for this mechanism in the CSE driver
because the struct only contains a condition (boolean) and a function
to execute, which can be expressed as a regular if-block.
Change-Id: I65fcb2fc02ea16b37c764f1fd69bdff3382fad18
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63708
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Remove dmi.h as it's migrated as gpmr.header
2. Remove unused gpmr definitions
3. For old platforms, define DMI defintions in c code
for less code changes.
TEST=Build
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ib340ff1ab7fd88b1e7b3860ffec055a75e562de7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch migrates GPMR driver over DMI to accommodate future SOCs
with different interface (other than PCR/DMI).
TEST=Able to build and boot google/redrix.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I00ac667e8d3f2ccefd8d51a8150a989fc8e5c7e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch creates a helper function to set SPI controller VCL bit as
recommended by Intel Flash Security Specification.
BUG=b:211954778
TEST=Able to build google/brya and verified that SPI flash controller
MMIO register 0xC4 bit 30 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie9a12db1bab81779fd8e7db90221d08da3c65011
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch creates a helper function to clear HSFSTS_CTL (offset 0x04)
register Bits 0 to 4.
As per Intel PCH BIOS spec section 3.6 Flash Security Recommendation,
it's important to clear all SPI outstanding status before setting SPI
lock bits.
BUG=b:211954778
TEST=Able to build google/brya with this patch and clear SPI controller
HSFSTS_CTL register Bits 0 to 4.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I62adba0d0cef1d4c53b24800f90b4fe76a9d78b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch creates a helper function to check if any SPI transaction
is pending.
As per Intel PCH BIOS spec section 3.6 Flash Security Recommendation,
it's important to ensure there is no pending SPI transaction before
setting SPI lock bits.
BUG=b:211954778
TEST=Able to build google/brya with this patch and no error msg seen
due to `SPI transaction is pending`.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd3f67ae60bfcb3610cd0950b057da97ff74b5b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
BUG=b:211954778
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib8cc4b8d13b61e3935f2050d25ce0278162c91c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch converts whitespace into tabs to maintain the uniformity
across the fast_spi_def.h file.
BUG=b:211954778
TEST=Able to build google/brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I56bcd263c6a5c0036e459926a25538e3448fbce6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add PAD_CFG_GPI_SCI_LOW_LOCK and PAD_CFG_GPI_SCI_HIGH_LOCK macro
to support mainboard to lock NC and GPI_SCI pins as applicable.
BUG=b:216583542
TEST=build passed
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5060777cc09af6cb3144ad799154e77167521de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch renames all required IA common code blocks and PCH configs
from DMI to GPMR.
TEST=Able to build and boot google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic6e576dd7f207eb16d90c5cc2892d919980d91c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enhances the GPMR driver to add public APIs for other IA
common code drivers and/or SoC code to utilize.
Also, migrated all PCR GPMR register definitions into the common
`pcr_gpmr.h` header file.
TEST=Able to build and boot google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87dca55a068366cb9a26a5218589166c1723da7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
As a start of GPMR(General Purpose Memory Range) driver migration,
1. rename dmi folder to gpmr folder
2. rename dmi.c to gpmr.c
TEST=build
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4d57f4b8bd06e0cf6c9afa4baf4a7bed64ecb56b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This patch adds `xhci_host_reset()` to reset XHCI controller and the
scope of this function is with SMM hence, compiling xhci.c for SMM as
well.
Also, refactored `xhci.c` code to keep PCI enumeration within the scope
of `ramstage` alone hence, guarded with `ENV_RAMSTAGE` env_variable.
BUG=b:227289581
TEST=Able to perform a call from `xhci_host_reset` from S5 smi handler.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie0dc0a64044f291893931726d26c08c8b964a3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63551
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Register the generic LPC memory/IO ranges with the resource allocator.
TEST: set ranges and check the coreboot log
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I9f45b38498390016f841ab1d70c8438496dc857e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch fixes a problem where the `is_cse_devfn_visible` function is
unable to show the CSE device slot and function number properly.
BUG=b:211954778
TEST=Able to display CSE device slot and function number properly as
below:
Before:
[DEBUG] PCI: 00:16.0 final
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
[WARN ] HECI: CSE device 00.0 is disabled
With this code changes:
[DEBUG] PCI: 00:16.0 final
[WARN ] HECI: CSE device 16.1 is disabled
[WARN ] HECI: CSE device 16.2 is disabled
[WARN ] HECI: CSE device 16.3 is disabled
[WARN ] HECI: CSE device 16.4 is disabled
[WARN ] HECI: CSE device 16.5 is disabled
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I76a634c64af26fc0ac24e2c0bb3a8f397a65d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
