| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a new Kconfig to enable PD controller to PMC mux
configuration. Selecting this config enables direct communication from
PDC to PMC. TCSS_HAS_USBC_OPS enables USB-C operations via the EC. When
SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION is selected, disable
TCSS_HAS_USBC_OPS to avoid sending PMC commands from AP/EC.
BUG=b:332383540
TEST=USB3 plugged during G3, is detected after system boots from G3.
Cq-Depend: chromium:5484387
Cq-Depend: chrome-internal:7106592
Change-Id: Ieeb503393418cdad43384be39ac49c93ba91e4db
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82077
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current fast_spi code uses memcpy for rw. The SPI flash read/write
has 4 byte limit, due to which the current 64 bit memcpy doesn't work.
Hence update rw ops to use read32p/write32p.
BUG=b:242829490
TEST=Verified MRC cache working on MTL 64-bit, future 64 bit platforms
and RPL(brox/skolas) 32-bit platforms.
Change-Id: I317c7160bf192dd2aeacebf6029a809bc97f3420
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As described in Intel document 336464 (8th gen S series datasheet volume
1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up
with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2
lanes. This lets mainboards provide a VGA output without sacrificing one
of the main 4-lane DDIs. Newer platforms seem to be lacking this.
However, the way this is structured in coreboot does not allow boards to
choose whether bifurcation should be enabled. Most boards in the tree do
not use DDI-E (it doesn't exist on mobile platforms), but there are some
boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to
provide a VGA output.
Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options
to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to
specify whether a platform supports DDI-A bifurcation at all (do nothing
otherwise, maintaining the original code's behaviour). If bifurcation is
supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear
or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register.
Change-Id: I516538db77509209d371f3f49c920476e06b052f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82113
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found in a Clevo V560TU with Intel Core Ultra 155H
Change-Id: I0f10808fd0e2d9c122743615fbce656c6d2447cc
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82071
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the graphics device IDs for Twinlake platform based on
Platform External Design Specification.
Document ID: 645548
BUG=b:326901448
TEST=Build tivviks and verify the IGD IDs.
Change-Id: Ide008d5c5302bd589784bc917a2610c42a0fdee4
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82038
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If8be8dc26f2729f55dc6716e6d01e2b801d79e44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Avoid calling `acpi_device_scope()` and `fast_spi_acpi_hid()` if the
result won't be used. Also, reorder a condition so that compile-time
constants appear first, so as to help the compiler optimize it out.
Change-Id: I42ce55c2978ad9c593c359c5decd5842fb3a97a1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I40e2e5a786499abbe2fce63d6e0f1ac1e780ab51
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fast SPI code assumes only one SPI flash is present. The SPI flash
driver for older southbridges is able to detect multichip. See the
spi_is_multichip() in src/southbridge/intel/common/spi.c.
Some boards (e.g. Lenovo ThinkCentre M920 Tiny) still come with two
chips populated instead of one. With this change, both chips are probed,
and the correct total size is calculated. Otherwise, only the first one
was probed, which resulted in an error such as:
SF size 0x1000000 does not correspond to CONFIG_ROM_SIZE 0x1800000!!
Change-Id: I8d7449f9e1470dc234fe5ba5217d3ce4c142b49c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I42bb15b8534d16401cd06ff803a8425221c5f3c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Call into FSP-T using the protected mode wrapper
and enter long mode in FSP-T support assembly code.
TEST: Booted on ibm/sbp1 in long mode.
Change-Id: Id6b9780b06b4bfbb952e32091ffbf3d0014f2090
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I79b93b0ca446411e2a1feb65d00045e3be85ee8a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
When switching back and forth between 32 to 64 bit mode, for example to
call a 32-bits FSP or to call the payload, new page tables in the
respective stage will be linked.
The advantages of this approach are:
- No need to determine a good place for page tables in CBFS that does
not overlap.
- Works with non memory mapped flash (however all coreboot targets
currently do support this)
- If later stages can use their own page tables which fits better with
the vboot RO/RW flow
A disadvantage is that it increases the stage size. This could be
improved upon by using 1G pages and generating the pages at runtime.
Note: qemu cannot have the page tables in the RO boot medium and needs
to relocate them at runtime. This is why keeping the existing code with
page tables in CBFS is done for now.
TEST: Booted to payload on google/vilbox and qemu/q35
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ied54b66b930187cba5fbc578a81ed5859a616562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80337
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Return statement is not useful in void function.
Change-Id: Idb8e07f48043452b329d255fe457f00317c017ae
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81429
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pmc_gpe_init uses soc_get_gpi_gpe_configs to initialize dw0, dw1
and dw2. dw0, dw1 and dw2 are uninitialized before calling
soc_get_gpi_gpe_configs. This is error prone for some soc
implementations where soc_get_gpi_gpe_configs does nothing.
This patch is simple, just to assign zero values to dw0, dw1 and
dw0, to enhance the code robustness.
TEST=intel/archercity CRB
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Change-Id: I8a710a2ac1482eed8c11977d51b187d834122d26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81210
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement watchdog for intel based platform by filling ACPI Watchdog
Action Table (WDAT) table.
The WDAT ACPI table encompasses essential watchdog functions, including:
- Setting and retrieving countdown/timeout values
- Starting and stopping the watchdog
- Pinging the watchdog
- Retrieving the cause of the last reboot, whether it was triggered by
the watchdog or another reason
The general purpose register TCO_MESSAGE1 stores the reason for the most
recent reboot rather than the original register TCO2_STS. This is
because the firmware must clear TCO2_STS, and it can't be reused for
storing this information for the operating system.
The watchdog is designed for use by the OS through certain defined
actions in the WDAT table. It relies on the ACPI Power Management Timer,
which may result in an increase in power consumption.
BUG=b:314260167
TEST=Enable CONFIG_ACPI_WDAT_WDT and CONFIG_USE_PM_ACPI_TIMER in the
config. Enable CONFIG_WDAT_WDT in the kernel config. Build and deploy
both firmware and kernel to the device. Trigger the watchdog by
performing the command: “cat > /dev/watchdog”. Wait approximately 30
seconds for the watchdog to reset the device.
Change-Id: Iaf7971f8407920a553fd91d2ed04193c882e08f1
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Commit 829e8e65b939 ("soc/intel: Use common codeflow for MP init")
brokes `USE_INTEL_FSP_MP_INIT' by making `init_cpus' function
static. This function needs to be accessible from
src/drivers/intel/fsp2_0/fsp_mpinit.c.
TEST=Verified on Meteor Lake rex board
Change-Id: Idb8cdfef7b4279da2c7dff344c95fe446a605934
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add System Agent IDs for Raptor Lake SKUs based on RPL Datasheet
(Doc ID: 743844) & EDS Vol 1 (Doc ID: 640555).
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I805040c65852742f1bbc43b443e115bcb0a930aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81115
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic080ffe7912ad71c77af09d2f3d1d9b08d9ffac8
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch marks CONFIG_SOC_INTEL_CSE_RW_VERSION as deprecated, as
future platforms will automatically determine the CSE RW version using
CSE RW partition.
BUG=b:327842062
TEST=CSE RW update successful on Screebo.
Change-Id: I8c3e5c759e4d9a43c3bce3a0c032086f17592a67
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80924
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch automates the process of determining the CSE RW version used
for the CBFS entry, eliminating the need for manual configuration in
CONFIG_SOC_INTEL_CSE_RW_VERSION.
How to get CSE RW Version:
1. Open CSE RW file as per CONFIG_SOC_INTEL_CSE_RW_FILE
2. Read offset 16 (0x10) to know the CSE version
3. Format:
- CSE_VERSION_MAJOR : offset 16-17
- CSE_VERSION_MINOR : offset 18-19
- CSE_VERSION_HOTFIX: offset 20-21
- CSE_VERSION_HOTFIX: offset 22-23
Benefits:
- Removes error-prone manual version updates.
- Prevents boot loops due to mismatched CSE RW versions (actual vs config)
- Eliminates the need for SKU-specific CSE version limitations.
BUG=b:327842062
TEST=CSE RW update successful on Screebo with this patch.
Example Debug Output:
[DEBUG] cse_lite: RO version = 18.0.5.2066
[DEBUG] cse_lite: RW version = 18.0.5.2107
Change-Id: I0165d81b0e4b38e0e097956f250bb7484d774145
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80923
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't attempt to open a PMIO window for a resource which doesn't have
the IORESOURCE_ASSIGNED flag set, since there is no point in doing so
and there's a high likelihood that the base address is 0, which will
throw an error.
TEST=build/boot purism/librem_cnl (Mini v2), ensure no errors in cbmem
log for attempting to open a PMIO window for unaassigned resources with
base address 0.
Change-Id: Ifba14a8f134ba12d5f5e9fdbac775d4f82b4c4de
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use uintptr_t for the IOAPIC base parameter of the various IOAPIC-
related functions to avoid needing type casts in the callers. This also
allows dropping the VIO_APIC_VADDR define and consistently use the
IO_APIC_ADDR define instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I912943e923ff092708e90138caa5e1daf269a69f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80358
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
If a downstream LPC device (eg, SIO function) is disabled, we shouldn't
attempt to open PMIO windows for it, as those functions often have
unset IO bases (which default to 0), resulting in false errors like:
[ERROR] LPC IO decode base 0!
TEST=build/boot purism/librem_cnl (Mini v2), verify no LPC IO errors
in cbmem log for disabled SIO functions.
Change-Id: I92c79fc01be21466976f3056242f6d1824878eab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch adds ADL N 4-core MCH ID 0x4618.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I47bd8fa991a48d30be4975b7965f2c3c859836dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80487
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add an ACPI stub containing the TCPU device in proper scope, along with
the device status, on boards not using the DPTF driver, so that there
exists an ACPI device to be referenced from the PEPD LPI constraint
list.
Adding the stub fixes an AE_NOT_FOUND ACPI error under Linux for
_SB.PCI0.TCPU on boards with the SA thermal device enabled but which do
not use the Intel DPTF driver.
TEST=build/boot Linux,Win11 on purism/librem_cnl (Librem Mini v2).
Change-Id: I926d0461e5e0dfaf606102575c2be555a6bfb695
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
acpi_device_path() includes the device name, so we end up with:
Scope (\_SB.PCI0.SATA) {
Device (SATA) {
...
Fix this by using acpi_device_scope() instead.
TEST=build/boot purism librem_cml (Mini v2), dump ACPI and verify
SATA device scope correct.
Change-Id: Ibbc8890d93b22f0ecba4b3a9b0531994574b3d55
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80554
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Ie7bc4f3ae00bb9601001dbb71e7c3c84fd4f759a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80596
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3fb4c6cfe24290c34682ff1c3396540465048727
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Rename tcss_mux_init to disconnect_tcss_devices to make it clear
what this function is doing, as it doesn't initialise anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5e43f0cca9d49bc30fc189663490a306efd71584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79874
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This commit streamlines code and strengthens common code robustness
by moving the following SoC-layer functions to the common layer:
- sa_get_mmcfg_size: Retrieves the MMIO (Memory-Mapped I/O)
configuration space size by reading offset
0x60 of the PCI Host Bridge (D0:F0).
- sa_get_dsm_size: Calculates the size of the DSM (Device Stolen
Memory) by reading offset 0x50 of the PCI
Host Bridge (D0:F0) to determine pre-allocated
memory for the IGD (Integrated Graphics Device).
- sa_get_gsm_size: Calculates the size of the GSM (Graphics Stolen
Memory) by reading offset 0x52 of the PCI Host
Bridge (D0:F0).
- sa_get_dpr_size: Determines the size of the DMA Protection
Range (DPR) by reading offset 0x5C of the PCI
Host Bridge (D0:F0).
TEST= Build and boot successful on google/screebo.
Change-Id: Ic00e001563ec6f0d737a445964c716b45db43327
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Leverages common SA header definitions for Host Bridge registers.
Renames DSM_BASE_ADDR_REG to BDSM and DPR_REG to DPR for brevity.
Additionally, made some minor code alignment corrections while
adding newer macros in the header file.
TEST= Build and boot successful on google/screebo.
Change-Id: I476f213d75a0978336b3749a5ba1499107eb2238
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
This makes it easier to reuse, e.g. if you want to do it twice in one
assembly file.
Change-Id: Ida861338004187e4e714be41e17c8447fa4cf935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In case where PAD_CFG_GPI_INT() is initialized with a pin value
lower to PAD_CFG_GPI_IRQ_WAKE() for same GPIO community
the set_ioapic_used() is only called for the PAD_CFG_GPI_IRQ_WAKE() pin.
Due to this the IRQ associated with PAD_CFG_GPI_INT() is found free by
find_free_unique_irq() during IRQ assignment and assigned to other pins
which causes IRQ conflicts
BUG=b:322984217
BRANCH=None
TEST=Boot test on brox, check if correct IRQ assigned to EC
Change-Id: I8c3d557e888b8d0ceac203f49b702910fba26d6d
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80334
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, SOC_INTEL_COMMON_BLOCK_TCSS will set MUX to disabled. The two
related options to re-configure it for either USB devices or displays,
are currently only supported by the ChromeEC. As such, any device
without the ChromeEC will boot with attached USB-C devices in a
non-functional state.
Add TCSS_HAS_USBC_OPS to make this feature configurable, and set the
default to enabled if the board features the ChromeEC.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia848668ae9af4637fc7cffec9eb694f29d7deba9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79882
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch moves the IP checksum algorithm into commonlib to prepare for
it being shared with libpayload. The current implementation is ancient
and pretty hard to read (and does some unnecessary questionable things
like the type-punning stuff which leads to suboptimal code generation),
so this reimplements it from scratch (that also helps with the
licensing).
This algorithm is prepared to take in a pre-calculated "wide" checksum
in a machine-register-sized data type which is then narrowed down to 16
bits (see RFC 1071 for why that's valid). This isn't used yet (and the
code will get optimized out), but will be used later in this patch
series for architecture-specific optimization.
Change-Id: Ic04c714c00439a17fc04a8a6e730cc2aa19b8e68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80251
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
This renames bus to upstream and link_list to downstream.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the definition of the TCO registers used in most boards to a
separate file and use it consistently. Do not unify TCO for older
incompatible platforms.
BUG=b:314260167
TEST=none
Change-Id: Id64a635d106cea879ab08aa7beca101de14b1ee6
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Multiple links are unused throughout the tree and make the code more
confusing as an iteration over all busses is needed to get downstream
devices. This also not done consistently e.g. the allocator does not
care about multiple links on busses. A better way of dealing multiple
links below a device is to feature dummy devices with each their
respective bus.
This drops the sconfig capability to declare the same device multiple
times which was previously used to declare multiple links.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iab6fe269faef46ae77ed1ea425440cf5c7dbd49b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Added Lunar Lake device IDs the device specific functions
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
Change-Id: Id31d567287b9921d60909b1eb617c7cfaf6672c9
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Add an ACPI stub containing the SATA device in proper scope, along with
the device status, so that there exists a device to be referenced from
the PEPD LPI constraint list. Fixes a Windows BSOD INTERNAL_POWER_ERROR
on devices with enabled SATA ports.
TEST=build/boot Win11 on google/puff (kaisa).
Change-Id: I951c62d09609ed73079fe97ea9ce49fdee333272
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib479b93b7d0b2e790d0495b6a6b4b4298a515d9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80073
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit d078ef2152052b5ce8686249dcd05ebd50010889
("soc/intel/cmn/block/pmc: Add previous sleep state strings in log")
used SLP_TYP numbers to map ACPI sleep state value. This incorrectly
printed wrong string for prev_sleep_state during S5.
ex: after a cold reset the previous sleep state printed was
[DEBUG] prev_sleep_state 5 (S3)
This patch corrects this by using ACPI sleep state numbers for mapping
the prev_sleep_state values.
TEST=test the logs on google/rex board after cold reset
[DEBUG] prev_sleep_state 5 (S5)
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I9bcdacc4d01a8d827a6abdf9af2b9e5d686ed847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80144
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This options should not be visible on !Intel, !ACPI and !USB4.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ia515d52baead9e151533278c33fda9436ee56168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79669
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch follows the BWG recommendation (doc 729123) by clearing
the SPI SYNC_SS bit before disabling the WPD bit in
SPI_BIOS_CONTROL. This prevents boot hangs due to a 3-strike error.
Unable to follow this guideline would result into boot hang
(3-strike error).
BRANCH=firmware-rex-15709.B
TEST=Able to build and boot google/rex.
Change-Id: I18dbbc92554d803eea38ceb0b936a9da9191cb11
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Previous sleep state showing in serial log is a magic number.
In order to let users understand its meanings directly, add
the strings to describe the modes.
TEST=build, boot the device and check the logs:
without this change, the log is like:
[DEBUG] prev_sleep_state 0
with this change:
[DEBUG] prev_sleep_state 0 (S0)
Change-Id: Iabe63610d3416b3b6e823746e3ccc5116fabb17d
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78999
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The physical address size of the System-on-Chip (SoC) can be different
from the CPU physical address size. These two different physical
address sizes should be used for settings of their respective field.
For instance, the physical address size related to the CPU should be
used for MTRR programming while the physical address size of the SoC
should be used for MMIO resource allocation.
Typically, on Meteor Lake, the CPUs physical address size is 46 if TME
is disabled and 42 if TME is enabled but Meteor Lake SoC physical
address size is always 42. As a result, MTRRs should reflect the TME
status while coreboot MMIO resource allocator should always use
42 bits.
This commit introduces `SOC_PHYSICAL_ADDRESS_WIDTH' Kconfig to set the
physical address size of the SoC for those SoCs.
BUG=b:314886709
TEST=MTRR are aligned between coreboot and FSP
Change-Id: Icb76242718581357e5c62c2465690cf489cb1375
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79665
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With earlier flow, a chunk of CBMEM region was allocated for each SRAM
e.g., PUNIT SRAM, SOC PMC SRAM and IOE PMC SRAM. Then entire SRAM
content was copied to dedicated CBMEM region. Later in acpi_bert.c, the
BERT table was getting created for each chunk of CBMEM. This flow was
not considering creating separate entries for each region of crashlog
records. It resulted in only the first entry getting decoded from each
SRAM.
New flow aims to fix this issue. With new flow, a simple singly linked
list is created to store each region of crashlog records from all
SRAMs. The crashlog data is not copied to CBMEM. The nodes are
allocated dynamically and then copied to ACPI BERT table and then
freed. This flow also makes the overall crashlog code much simpler.
BUG=b:298234592
TEST=With this change decoding crashlog show comprehensive details,
tested on REX.
Change-Id: I43bb61485b77d786647900ca284b7f492f412aee
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78257
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces a new API to disable signaling the 3-strike event
on Intel Meteor Lake C0 (QS) stepping and subsequent SoCs. This is
necessary because the existing event handling mechanism is incompatible
with the new hardware design.
Disabling the 3-strike event registration prevents the 3-strike count
from increasing, which addresses bug b:314883362. This issue can potentially lead to system instability.
BUG=b:314883362
TEST=disabling the 3-strike event on a Google Screebo system with QS silicon.
Change-Id: I15bd5a93da34d7f2a127c21c4cd8b5952926bccf
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79472
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a function to check if a CSE FW update is required
during this boot. The function is expected to be used during use
cases like Pre-Memory Sign of Life text display to inform user of
a CSE Firmware update.
Bug=279173035
TEST=build and boot on google/rex board. Call the function in romstage
and confirm it returns True during CSE FW update and False otherwise
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If5fae95786d28d586566881bc4436812754636ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78243
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Skip sending EOP from coreboot when payload is sending it.
BUG=b:279184514
TEST=Verify sending EOP from depthcharge on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0fbb9fd0f8522eefad39960ca3167c2ba764f523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74765
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch calls into the function to join the MBUS if the GFX PEIM
module inside the FSP binary is taking care of graphics initialization
based on the RUN_FSP_GOP config option. The FW skips joining the MBUS
in case of a non-FSP solution and/or SOC_INTEL_GFX_MBUS_JOIN config is
not enabled.
BUG=b:284799726
TEST=MBUS joining is only applicable for google/rex while using GFX
PEIM.
Change-Id: I50d719a286722f5aafbad48ab4ca60500c836dd6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch fixes the redundent GFX modeset issue when a dual display
is attached (e.g. an eDP display and an HDMI display).
The issue was caused by the MBUS joining logic not considering the
display type. This patch introduces three types of display: internal,
external, and dual-display. The MBUS joining logic is then updated
to consider the display type and ensure that the correct pipes are
joined to the MBUS:
For internal-only displays, only PIPE-A is joined to the MBUS.
For external displays, no pipes are joined to the MBUS.
For dual-displays, all available pipes are joined to the MBUS.
BUG=b:284799726
TEST=Able to fix the redundent modeset issue when eDP and HDMI attached
to the google/rex.
Change-Id: Ie2a3b9f1212a9dcab2b7305078fe22ee35e7423c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78691
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CBFS verification feature (CONFIG_VBOOT_CBFS_INTEGRATION)
being enabled, we can now remove cbfs_unverified_area_map() APIs
which are potential cause of security issues as they skip verification.
These APIs were used earlier to skip verification and hence save
boot time. With CBFS verification enabled, the files are verified
only when being loaded so we can now use cbfs_cbmem_alloc()/cbfs_map
function to load them.
BUG=b:284382452
Change-Id: Ie0266e50463926b8d377825142afda7f44754eb7
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78214
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
The macro ENV_HAS_CBMEM achieves the same as this inline function.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6d65ca51c863abe2106f794398ddd7d7d9ac4b5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77166
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
devices
When walking the devicetree to generate the list of devices and minimum
sleep states, skip any devices which have the disable or hidden flags
set. This prevents adding entries for devices which are not present,
which are hidden (and likely to not have a min sleep state entry), or
generating duplicate entries in the case of PCIe remapping.
Any of these conditions are considered invalid by Windows and will
result in a BSOD with an INTERNAL_POWER_ERROR.
TEST=tested with rest of patch train
Change-Id: I06f64a72c82b9e03dc8af18700d24b3d10b7d3a7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
If a root port is not present but was enabled in the devicetree, mark
it disabled so that no ACPI references will be generated by any
function which walks the devicetree (eg, LPI constraints).
TEST=tested with rest of patch train
Change-Id: I52e23fb1c0148a599ed736fc294e593ebbd27860
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78517
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit bd9c562a9e0c6af65f5e798a17ba9a55892ef082 ("acpi: Configure
slp-s0 residency counter frequency in LPIT table") led to jenkins
reporting the following error:
!!!!! Error: defined(CONFIG_ACPI_SOC_INTEL_SLP_S0_FREQ_HZ)
used at src/include/acpi/acpi.h:457. Symbols of type 'hex'
are always defined.
Since hex Kconfig are always defined there is no need to test it being
defined but also no need to handle zero or non-zero values.
In addition:
1. This config was defined in Meteor Lake specific Kconfig file while
it should actually be define closer to where it is being used (here
soc/intel/common/block/acpi/Kconfig) and only set by the SoC Kconfig.
2. Once moved and under control of `SOC_INTEL_COMMON_BLOCK_ACPI_LPIT'
gating (lpit.c), the Kconfig name needed to be adjusted to better fit
its use.
3. Make Meteor Lake Kconfig sets the config but does not define it
anymore.
TEST=LPIT ACPI table Counter Frequency field is set to 0x2005 on rex
Change-Id: I2083c9209e61be6180cca2c9f74097e2f4b4ce9a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78458
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch implements `.final` hooks for the IGD device to perform the
required operations before handing the control to the payload or OS.
The MBUS (Memory Bus) is a high-speed interface that connects the
graphics controller to the system memory. It provides a dedicated data
path for graphics data, which helps to improve graphics performance.
The MBUS is a key technology that helps to make the Intel i915 driver
powerful and versatile graphics drivers available. It provides the
high-speed data transfer capabilities that are essential for smooth
and responsive graphics performance.
Enable this config to ensure that the Intel GFX controller joins the
MBUS before the i915 driver is loaded. This is necessary to prevent
the i915 driver from re-initializing the display if the firmware has
already initialized it. Without this config, the i915 driver will
initialize the display to bring up the login screen although the
firmware has initialized the display using the GFX MMIO registers and
framebuffer.
Kernel graphics driver can avoid redundant display init by firmware,
which can optimize boot time by ~15ms-30ms.
Ensures hashing mode is 1x4 to enable a single pipe between Pipe A or B.
Typically, internal display is on Pipe-A, so 1x4 restricts MBUS joining
to internal display alone.
BUG=b:284799726
TEST=Able to build and boot google/rex
Change-Id: I60ae76dc783383e027e66edbcdeeb535472caeb1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78385
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for detecting dual displays (eDP and HDMI) on
Intel platforms. This information is useful for setting the
`lb_framebuffer.has_external_display` variable, which is used to
determine whether depthchage should avoid shutting down when an
extended display is present.
TEST= Able to build and boot google/rex, where depthchage now
successfully avoids shutting down when both eDP and HDMI displays
are attached.
w/o this patch:
with eDP and HDMI attached: .has_external_display=0
with eDP attached: .has_external_display=0
with HDMI attached: .has_external_display=1
w/ this patch:
with eDP and HDMI attached: .has_external_display = 1
with eDP attached: .has_external_display=0
with HDMI attached: .has_external_display=1
Change-Id: Ie39d48da75a21e3508a1fbcf09da31caedaa1c0a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78383
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserve SBREG BAR if it is outside of the PCH reserved memory range.
Desktop series processors have larger SBREG BARs, which, unlike mobile
processors, do not fall into the standard PCH reserved range
(0xfc800000 - 0xfe7fffff). Create a separate reservation for such a case. There is no telling what could happen if the reservation is not
made in ACPI.
TEST=Boot Windows 11 and Ubuntu 22.04 on MSI PRO Z690-A DDR4
Change-Id: Ibaf45daba37e3acfcea0e653df69fa5c2f480c4a
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77445
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Systemagent related functions are not used in this file. Remove the
unused the header file.
Change-Id: Ifbb04898e9dcebef96d8c73771e66e0d6fabc7fb
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78312
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel platforms use Low Power Idle Table (LPIT) to enumerate platform
Low Power Idle states. There are two types of low power residencies
a) CPU PKG C10 - read via MSR (Function fixed hardware interface)
b) Platform Controller Hub (PCH) SLP_S0 - read via memory mapped IO
Ref. https://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf,
section 2.2.1: value of 0 indicates that counter runs at TSC frequency.
Ref. Intel 64 and IA-32 Architectures Software Developer’s Manual (Vol 4)
MSR 0x632: PC10 residency counter is at same frequency as the TSC.
Whereas slp_s0 residency counter running in different frequency.
BUG=b:300440936
TEST=check kernel cpuidle sysfs are created after kernel boot
cat /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
cat /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us
Change-Id: Ibde764551a21b9aecb1c269948f4823548294711
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch implements an API to report the presence of an external
display on Intel silicon. The API uses information from the transcoder
and framebuffer to determine if an external display is connected.
For example, if the transcoder is attached to any DDI ports other than
DDI-A (eDP), and the framebuffer is initialized, then it is likely
that an external display is present.
This information can be used by payloads to determine whether or not
to power on the display, even if eDP is not initialized.
BUG=b:299137940
TEST=Build and boot google/rex
Scenarios:
Booting with eDP alone: has_external_display value is 0
Booting with eDP + HDMI: has_external_display value is 0
Booting with HDMI alone: has_external_display value is 1
Booting with USB-C display alone: has_external_display value is 1
Change-Id: I77436940978c7fa9368d79394b46a5e794c32e42
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78080
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The ACPI methods for enabling USB wake are identical on ADL, CNL and
SKL. Move them to a common ASL file so they can be reused more easily
on other SoCs.
Also move the USB_PORT_WAKE_ENABLE macro used to create enable bitmasks
in devicetree to a common header.
BUG=b:300844110
TEST=Use abuild to build kinox, puff, and fizz with and without this
change. Check the generated dsdt.aml is unchanged.
Change-Id: Iabdfe2bece7fafc284ddf04382f1bbcacc370cce
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch adds eventlog entries for the below scenarios:
1. To indicate success or failure of PSR data back-up command
2. To indicate the loss of PSR data when CSE update is corrupted, and
data clear command is issued to clear the data.
3. To indicate the loss of PSR data when CSE boot partition info
response is corrupted and data back-up is not initiated.
BRANCH=None
BUG=b:273207144
TEST=Verify elog event added after PSR data backup command is sent
cse_lite: PSR_HECI_FW_DOWNGRADE_BACKUP command sent
...
ELOG: Event(B9) added with size 10 at 2023-06-27 06:44:49 UTC
Change-Id: I2459a2b941d28a87b6c78f75dbe8779d73328d7a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Get PSR bit state using MKHI_FWCAPS_GET_FW_FEATURE_STATE HECI command
Use this bit info to check if SKU supports PSR and consequently issue
PSR_HECI_FW_DOWNGRADE_BACKUP command for PSR data backup during
downgrade.
BUG=b:273207144
TEST=build CB image and boot on google/rex board. Check for
"PSR is supported in this SKU" message in coreboot logs to confirm
that PSR bit is set in SKU
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I6e92341a9dc799146eb8f1a70b3a4a16fd1aa0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
During CSE FW downgrade we erase CSE data. This would result in
Platform Service Record(PSR) data also to be erased.
To avoid losing PSR data we need to make a backup before data clear.
This patch sends PSR_HECI_FW_DOWNGRADE_BACKUP HECI command to CSE,
informing the CSE to backup PSR data before a data clear operation
during downgrade.
CMOS memory is used to track the backup status. PENDING is the default
state, it is updated to DONE once PSR_HECI_FW_DOWNGRADE_BACKUP HECI
command is sent.
PSR data can be backed up only post DRAM is initialized. The idea is to
perform cse_fw_sync actions in ramstage when PSR is enabled on a
platform. As part of the cse_fw_sync actions, when a firmware downgrade
is requested the command to back-up data is sent. Once the backup has
been done, trigger the firmware downgrade.
BRANCH=None
BUG=b:273207144
TEST=build CB image for google/rex board and check PSR backup command
is being sent during a CSE FW downgrade. Also check PSR data is not
lost/erased after a downgrade using intel PSR tool.
Change-Id: I135d197b5df0a20def823fe615860b5ead4391f8
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74577
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data. Since firmware downgrade
and PSR data backup flows involve global resets, there is a need to
track the PSR data backup status across resets. So adding a CMOS
variable for the same.
This patch implements API to access PSR backup status stored in CMOS.
The get API allows to retrieve the PSR backup status from CMOS memory.
The update API allows to update the PSR backup status in CMOS.
BRANCH=None
BUG=b:273207144
TEST=Able to retrieve PSR backup status across resets.
Change-Id: I270894e3e08dd50ca88e5402b59c211d7e693d14
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data, and this command can be
sent only in post-RAM stages. So the cse_fw_sync actions needs to be
moved to ramstage.
Sending cse_get_bp_info command in ramstage takes additional boot time
of ~45-55ms on rex. To avoid the boot time penalty, this patch provides
an API to get the cse_bp_info in early romstage. The response data is
then migrated to cbmem once memory is initialized. The same data in
cbmem can be utilized in ramstage to perform other cse_fw_sync actions.
This patch also adds check to validate cse_bp_info in cbmem and avoids
sending the command again if the data is valid.
BUG=b:273207144
TEST=Verify the command works in early romstage, data is migrated to
cbmem and valid data is available in ramstage on rex.
Change-Id: Ib1e72c950ba0f4911924805f501ec1bd54b6ba3c
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78053
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data, and this command can be
sent only in post-RAM stages. So the cse_fw_sync actions needs to be
moved to ramstage.
This patch ensures SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE is selected when
PSR is enabled.
BUG=b:273207144
Change-Id: I7c9bf8b8606cf68ec798ff35129e92cd60bbb137
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78055
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
cse_store_rw_fw_version() stores CSE RW firmware version in global
variable or cbmem in romstage and ramstage respectively, based on the
stage it is called in. The call to this function is from the
cse_print_boot_partition_info() in cse_get_bp_info.
In the subsequent patches, the idea is to send the cse_get_bp_info early
in romstage and store in cbmem once memory is initialized. So when the
cse_fw_sync is called in early ramstage, the stored cse_bp_info_rsp is
used instead of sending the CSE get boot partition info command again.
To de-link the call to cse_store_rw_fw_version from cse_get_bp_info and
to ensure the CSE RW FW version is stored in all cases, moving the
function to do_cse_fw_sync.
BUG=b:273207144
Change-Id: I0add2c167c85cbddef2ecb4c019061a08562bbdf
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost.
CSE Lite SKU firmware supports a command to backup PSR data before
initiating a firmware downgrade. PSR data backup command works only
after memory has been initialized. Moving only the downgrade would add
complexity of splitting the cse_fw_sync across pre-RAM and post-RAM
stages. So the idea is to move cse_fw_sync into ramstage when PSR is
enabled.
We are introducing a flow to get CSE boot partition info in early
romstage and then same data will be stored in cbmem once DRAM is
initialized. The CSE BP info data in cbmem will be utilized in early
ramstage to perform cse firmware sync operations. This helps in avoiding
re-sending the CSE get boot partition info command in ramstage. Having
cse_bp_info_rsp as global helps in de-linking cse_get_bp_info from
cse_fw_sync.
Many functions take cse_bp_info as input parameter. Since
cse_bp_info_rsp is global now, we can make use of global cse_bp_info and
remove it as input parameter from those functions.
BUG=b:273207144
TEST=Verify cse_bp_info_rsp holds value across the stage.
Change-Id: I0ee050b49fcae574882378b94329c36a228e6815
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77070
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
This reverts commit 06cb756f0202d78d299b30728b6559f6107c43c3.
Reason for revert: These Kconfigs are needed by boards which use the
CSE stitching tools (i.e. select STITCH_ME_BIN). They're selected by
some boards in the downstream ChromeOS repo. They're used in
src/soc/intel/Makefile.inc (see the line with
`$(CONFIG_CSE_$(2)_FILE)`).
Change-Id: Ide6fc74b457439f06b7ef9b37f11d6c9ff226b80
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76719
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce the OC WDT integration code footprint by consolidating
multiple API calls into a single function to be called by SoC.
Change-Id: Iba031cd8e0b72cabc4d0d8a216273d763231c889
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77574
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added Raptor Lake U graphics device ids.
Renamed Raptor Lake U graphics device ids that were marked as
Raptor Lake P.
Added Raptor Lake P graphics device ids.
References:
RaptorLake External Design Specification Volume 1 (640555)
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I44734f927764f872b89e3805a47d16c1ffa28865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77898
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add more details in CPU crashlog header structure, such as
storage off status and support, re-arm status etc. These fields
are used to check of particular feature is supported or not and
if supported what is the status of the feature.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I4242b6043b8f8ad9212780f44ca0448cd2b6b9f8
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77562
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce cpu_cl_cleanup() and cpu_cl_rearm() functions
for CPU crashlog flow. Also add default weak implementations.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: Iad68d3fdaf7061148b184371f7ef87d83f2b2b38
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77238
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all SOC follow the same programming to clear crashlog
data. So make common implementation of cpu_cl_clear_data()
weak.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: Ic2b4631d57703abff0ab1880fb272ef67bb1b8e9
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PMC and P2SB IDs for Raptor Lake-S PCH were missing. Add them based
on doc 619362 rev 2.2.
Change-Id: I5de00adf2d87cf50571abb02b28e7feebdc3911e
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77448
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch addresses the increased boot time issue that occurs when ISH
store is enabled, such as in the "rex4es_ec_ish" variant.
During a cold reboot, the CBMEM memory resets and loses the stored
firmware versions. This causes the firmware versions to be fetched again
from the CSE, which increases the boot time by about 200 ms. This patch
stores a backup of the firmware version in CMOS and updates the CBMEM
memory during a cold reboot.
BUG=b:280722061
Test=Verified the changes on rex board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ibc5a027aa2bb7217e5032f56fece0846783557a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75755
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements APIs to access the CSE FW partition versions in
CMOS. The get API allows users to retrieve the current version from
CMOS memory. The set API allows users to set the version in CMOS
memory.
BUG=b:280722061
TEST=APIs verified on rex board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Idd0ee19575683691c0a82a291e1fd3b2ffb11786
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
x86 pre-memory stages do not support the `.data` section and as a
result developers are required to include runtime initialization code
instead of relying on C global variable definition.
To illustrate the impact of this lack of `.data` section support, here
are two limitations I personally ran into:
1. The inclusion of libgfxinit in romstage for Raptor Lake has
required some changes in libgfxinit to ensure data is initialized at
runtime. In addition, we had to manually map some `.data` symbols in
the `_bss` region.
2. CBFS cache is currently not supported in pre-memory stages and
enabling it would require to add an initialization function and
find a generic spot to call it.
Other platforms do not have that limitation. Hence, resolving it would
help to align code and reduce compilation based restriction (cf. the
use of `ENV_HAS_DATA_SECTION` compilation flag in various places of
coreboot code).
We identified three cases to consider:
1. eXecute-In-Place pre-memory stages
- code is in SPINOR
- data is also stored in SPINOR but must be linked in Cache-As-RAM
and copied there at runtime
2. `bootblock` stage is a bit different as it uses Cache-As-Ram but
the memory mapping and its entry code different
3. pre-memory stages loaded in and executed from
Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`).
eXecute-In-Place pre-memory stages (#1) require the creation of a new
ELF segment as the code segment Virtual Memory Address and Load Memory
Address are identical but the data needs to be linked in
cache-As-RAM (VMA) but to be stored right after the code (LMA).
Here is the output `readelf --segments` on a `romstage.debug` ELF
binary.
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20
LOAD 0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW 0x4
Section to Segment mapping:
Segment Sections...
00 .text
01 .data
Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they
are totally different for the Segment 1 holding the `.data`
section. Since we need the data section `VirtAddr` to be in the
Cache-As-Ram and its `PhysAddr` right after the `.text` section, the
use of a new segment is mandatory.
`bootblock` (#2) also uses this new segment to store the data right
after the code and load it to Cache-As-RAM at runtime. However, the
code involved is different.
Not eXecute-In-Place pre-memory stages (#3) do not really need any
special work other than enabling a data section as the code and data
VMA / LMA translation vector is the same.
TEST=#1 and #2 verified on rex and qemu 32 and 64 bits:
- The `bootblock.debug`, `romstage.debug` and
`verstage.debug` all have data stored at the end of the `.text`
section and code to copy the data content to the Cache-As-RAM.
- The CBFS stages included in the final image has not improperly
relocated any of the `.data` section symbol.
- Test purposes global data symbols we added in bootblock,
romstage and verstage are properly accessible at runtime
#3: for "Intel Apollolake DDR3 RVP1" board, we verified that the
generated romstage ELF includes a .data section similarly to a
regular memory enabled stage.
Change-Id: I030407fcc72776e59def476daa5b86ad0495debe
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When CSE jumps between RO and RW, it triggers global reset so the
AP goes down to S5 and back to S0. For Chromebox, when AP goes
down to S5 EC set AP_IDLE flag. This cause an issue to warm reset
the Chromebox device when it is in recovery mode and powered by
USB-C adapter. This patch allows AP to direct EC to clear AP_IDLE
flag before trigger reset.
BUG=b:296173534
BRANCH=firmware-dedede-136-6.B
TEST=Chromebox DUT which is powered by USB-C adapter boots up
after warm reset in recovery mode
Change-Id: Ib0002c1b8313c6f25d2b8767c60639aed8a4f904
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77632
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
|
|
commit f8ac3dda02f22ebf857efb5b845db97f00598f7d ("soc/intel/common:
Order the CPUs based on their APIC IDs") sort algorithnm walks all the
`cpu_info' entries without discarding empty ones. Since `cpu_info' is
not initialized, the data that is used is undefined and it generally
results in the creation of invalid `Local x2APIC' entries in the
MADT ("APIC") ACPI table.
Depending on the X2APIC ID value the Linux kernel behavior
changes (cf. arch/x86/kernel/acpi/boot.c::acpi_register_lapic()):
1. If (int)ID >= MAX_LOCAL_APIC (32768), the Linux kernel discards the
entry with the "skipped apicid that is too big" INFO level
message.
2. If (int)ID < MAX_LOCAL_APIC (32768) (including negative) this data
is taken into account and it can lead to undesirable behavior such
as core being disabled as (cf. "native_cpu_up: bad cpu" ERROR
kernel message).
TEST=Verified the MADT does not contain any invalid entries on rex.
Change-Id: I19c7aa51f232bf48201bd6d28f108e9120a21f7e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77615
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
It makes the detection of this feature accessible without the
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU dependency.
BUG=288978352
TEST=compilation
Change-Id: I005c4953648ac9a90af23818b251efbfd2c04043
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77697
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1dbfca33c437c680118eb3a92e60b5607c93e565
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77768
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9ecd81ffaa48dbed225a23900704b259569cb7c8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77527
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows boards which enable the GNA device to provide an attachment
point for the OS drivers.
TEST=tested with rest of patch train
Change-Id: I3398eefb80e4407594883dd39128cd7885105ac3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove MAILBOX word from CPU_CRASHLOG_MAILBOX_WAIT_STALL
and CPU_CRASHLOG_MAILBOX_WAIT_TIMEOUT macros, because they
can be used for other interface as well.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I62b04fa4b05c427db494a536ca6504db02dfeb68
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77236
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When parsing descriptor table the record can have tag type = 7.
This tag contains metadata depending on SOC. The platform may
choose to parse it based on implementation of crashlog.
BUG=b:262501347
TEST=Able to build google/rex.
Change-Id: I60dda06950974f7949fa5635141e4b7798c4d1f2
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Older FSP releases don't have an option to do MP init via PPI, so it
should not be visible.
Change-Id: I74b4bd5dd72980b859763e89ead7d7f619321e66
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63759
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new block for handling overclocking watchdog. The watchdog is
present since Skylake or maybe even earlier so it is safe to use with
most of the microarchitectures utilizing intelblocks.
The patch adds the common block for initializing and feeding the
watchdog. Timeout is defined statically in Kconfig and should be set
high enough by the board or SoC Kconfig to let the board boot with
full memory training and avoid reset loops. Full training of 128GB
DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs
with newer memory technologies and higher RAM capacity may take more.
The default has been set to 10 minutes.
The patch also adds support for feeding watchdog in driverless mode,
i.e. it utilizies periodic SMI to reload the timeout value and restart
the watchdog timer. This is optional and selectable by Kconfig option
as well. If the option is not enabled, payload and/or software must
ensure to keep feeding the watchdog, otherwise the platform will
reset.
TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets
after some time. Enable the watchdog in driverless mode and see the
platform no longer resets and periodic SMI keeps feeding the watchdog.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses the CSE firmware specific data to store Intel
ISH firmware related information. Sending an ISH partition version
information command on every boot cycle would impact the overall boot
performance.
This information is used by the auto-test framework to ensure the ISH
firmware update is proper for in-field devices.
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified ISH FW version is
getting displayed across warm resets without impacting the boot time.
Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch selects SOC_INTEL_STORE_CSE_FW_VERSION config by default
for CSE LITE SKU. It helps to dump the CSE RW firmware version which
further consumed by auto-test infrastructure to ensure CSE RW firmware
update is successful.
BUG=b:285405031
TEST=Able to build and boot google/rex.
Verified CSE RW FW version (for LITE SKU) is getting displayed without
impacting the boot time.
Change-Id: Iba5903c73c0a45b01e6473714e0d5f759c061825
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77175
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch introduces a CSE firmware specific data in order
to store Intel CSE and associated firmware related information which
requires a sync between Pre-RAM and Post-RAM phase.
This information will be used further to retrieve currently running
CSE RW firmware instead of fetching the version information by sending
a HECI cmd (which consumes 7ms-15ms depending upon the CSE operational
state).
Current implementation attempts to simply the CSE RW FW version store
and retrieval operations as below
* CSE sync in romstage (aka Pre-RAM) - Relying on .bss segment to store
the CSE info data in absence of real physical memory and sync back into
the CBMEM once available (after FSP-M exits).
* CSE sync in ramstage (aka Post-RAM) - Directly stored the CSE RW
version into the CBMEM (as CBMEM is online).
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified CSE RW FW version
(for LITE SKU) is getting displayed without impacting the boot time.
w/o this patch:
10:start of ramstage 722,257 (43)
17:starting LZ4 decompress (ignore for x86) 723,777 (1,520)
w/ this patch:
10:start of ramstage 722,257 (43)
17:starting LZ4 decompress (ignore for x86) 723,777 (1,520)
Change-Id: Ia873af512851a682cf1fac0e128d842562a316ab
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77174
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
