summaryrefslogtreecommitdiff
path: root/src/soc/intel/braswell
AgeCommit message (Collapse)Author
2018-03-08soc/intel/braswell: add resource allocation for LPE BAR1Matt DeVillier
coreboot's PCI resource allocator doesn't assign BAR1 for Braswell's LPE device because it doesn't exist, but is required by Windows drivers for the device to function. Manually add the required resource via the existing lpe_read_resources function, and marked it as IORESOURCE_STORED so pci_dev_set_resources ignores it. TEST: boot Windows 10 on google/edgar, observe that memory resources are properly assigned to LPE driver for BAR1 and no error reported. Change-Id: Iaa68319da5fb999fe8d73792eaee692cce60c8a2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-03-08soc/intel/braswell: add ACPI for eMMC/SD devices in PCI modeMatt DeVillier
Allows eMMC in PCI mode to be seen/used by Windows. Test: boot Windows installer on google/edgar, observe internal eMMC storage available for installation when eMMC in PCI (vs ACPI) mode. Change-Id: I4272c198e5e675f451a1f4de5d46e3cd96371446 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-07soc/intel/braswell: add LPEA resources to southcluster.aslMatt DeVillier
The LPEA device memory resources, required by Windows drivers, were not being set. Allocate required resources per Inte'sl CHT Tianocore reference code. Test: boot Windows on google/edgar, observe LPEA device working properly. Change-Id: Ic3ecfc2ddade7d76dbaa95ffdd82599c3bcf35da Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-06soc/intel/braswell: increase LPEA fw allocation to 2MiBMatt DeVillier
Increase memory allocated for the LPEA firmware from 1MiB to 2MiB to match Intel CHT reference code and fix Windows functionality. Test: boot Windows on google/edgar, observe no error in Device Manager for LPEA audio device due to BAR2 resource allocation. Change-Id: I7cffcdd83a66a922c2454488c8650df03c9f5097 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-06soc/intel/braswell: fix PCI resource PMAX/PLEN valuesMatt DeVillier
Without PMAX correctly set, the calculation for PLEN is incorrect, leading to a Windows BSOD on boot. Correct PMAX using code from Baytrail SoC, setting PMAX to (CONFIG_MMCONF_BASE_ADDRESS - 1). Test: Boot Windows 10 on google/edgar without BSOD. Change-Id: I4f2f4a0ff3a285826709f9eaafa40b0bf0cafb83 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24985 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-29intel: Prepare registers so Windows drivers are happierPatrick Georgi
Change-Id: I12ebed30de4df9814ccb62341c7715fc62c7f5b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/23431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
* Rename tlcl* to tss* as tpm software stack layer. * Fix inconsistent naming. Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
* Move code from src/lib and src/include into src/security/tpm * Split TPM TSS 1.2 and 2.0 * Fix header includes * Add a new directory structure with kconfig and makefile includes Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-17drivers/mrc_cache: move mrc_cache support to driversAaron Durbin
There's nothing intel-specific about the current mrc_cache support. It's logic manages saving non-volatile areas into the boot media. Therefore, expose it to the rest of the system for any and all to use. BUG=b:69614064 Change-Id: I3b331c82a102f88912a3e10507a70207fb20aecc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04sb and soc: Enforce correct offset of member "chromeos" in global_nvs_tJonathan Neuschäfer
The padding has recently been broken in commit 90ebf96df5 ("soc/intel/skylake: Add GNVS variables and include SGX ASL") and fixed again in commit af88398887 ("soc/intel/skylake: Fix broken GNVS offset for chromeos"). Avoid this bug in the future. Change-Id: I1bf3027bba239c8747ad26a3130a7e047d3b8c94 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-30soc/intel/braswell/acpi: Clean OpRegion upPatrick Rudolph
Reorder code and put platform specific bits into update_igd_opregion. Get rid of get_fsp_vbt and init_igd_opregion. Write GMA opregion in case a VBT was provided, even when no FSP_GOP is to be run. Use SOC_INTEL_COMMON_GFX_OPREGION to reduce code duplication. Change-Id: Ibabeb05a9d3d776b73f6885dcca846d5001116e7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-20vboot: reset vbnv in cmos when cmos failure occursAaron Durbin
There's an occasional issue on machines which use CMOS for their vbnv storage. The machine that just powers up from complete G3 would have had their RTC rail not held up. The contents of vbnv in CMOS could pass the crc8 though the values could be bad. In order to fix this introduce two functions: 1. vbnv_init_cmos() 2. vbnv_cmos_failed() At the start of vboot the CMOS is queried for failure. If there is a failure indicated then the vbnv data is restored from flash backup or reset to known values when there is no flash backup. BUG=b:63054105 Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/braswell: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: Ic4bf99dc3a26fbc3bd508e484963b9298ef1b24b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-11cpu/x86/mp_init: remove adjust_cpu_apic_entry()Aaron Durbin
The original purpose of adjust_cpu_apic_entry() was to set up an APIC map. That map was effectively only used for mapping *default* APIC id to CPU number in the SMM handler. The normal AP startup path didn't need this mapping because it was whoever won the race got the next cpu number. Instead of statically calculating (and wrong) just initialize the default APIC id map when the APs come online. Once the APs are online the SMM handler is loaded and the mapping is utilized. Change-Id: Idff3b8cfc17aef0729d3193b4499116a013b7930 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-08soc/intel/braswell: add USB2 PHY PERPORTRXISET UPDKevin Chiu
Adapted from Chromium commits 59938a0, 5a4ea6e, 88999de. Add UPD to config USB2 PERPORTRXISET for D-stepping BSW SoC. Ensure PerPortRXISet UPD offsets align with FSP. Ensure UPD values not defined in devicetree.cb are referred from *.dsc. Original-Change-Id: Ib0cdee47692e492a78c34e2dd192447b92253e35 Original-Change-Id: If0d8419d4c70864bd385b5699e0e6d1ec515d26a Original-Change-Id: I3a1d688282303e8c367620ac8bb3e2cba7ab3dcf Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: I87eda6ea6688931f1a1b069c38ffc515398ad396 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08soc/intel/braswell: Add USB2 phy setting overrideMatt DeVillier
Adapted from Chromium commit 9756af8. Create hook function to override USB2 phy setting from board level. Original-Change-Id: Ic736dd945f01cf9f24af4ce3bd3f2757abfdeb2e Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: If2ac687f6fc44e4c022a72eea7f08cb6385f0380 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08soc/intel/braswell: Add SoC stepping identify helperMatt DeVillier
Adapted from Chromium commit 9756af8. Add SOC helper to identify BSW SoC stepping. Will be used to override USB2 phy setting based on stepping in subsequent commit. Original-Change-Id: Ic736dd945f01cf9f24af4ce3bd3f2757abfdeb2e Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Ib2371f85ea84df4b417e25ec8840d317cd918d5f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08soc/intel/braswell: Add I2C clock config optionsDivagar Mohandass
Cherry-pick from Chromium commit e3c1ec2. This change includes - FSP config parameters to configure I2C clock speed. - Options are 0 - 100Khz, 1 - 400Khz, 2 - 1Mhz and default is 400Khz. Original-Change-Id: Iab2bf3997102908583078f5f1d185d6c66561390 Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Tested-by: Kenji Chen <kenji.chen@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifae3ba4262cb3cc6416ce5054614ed7765e22c25 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/braswell: Put SERIRQ in quiet modeHannah Williams
Cherry-pick from Chromium commit 1568761. Original-Change-Id: If459c3cab8fb7ca13d8bff3173a94855ec2e2810 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Kevin K Wong <kevin.k.wong@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org> Change-Id: Ibb2e6d316adcfcc0d56d242501aac9c4c0bbdf62 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/braswell: Populate NVS SCC BAR1Hannah Williams
Cherry-pick from Chromium commit f92d7be. This BAR is used in _PS0 and _PS3 methods and is used by kernel driver to put SD controller in D3 Original-Change-Id: Iae4722cb222f61e96948265f57d6b522065853d9 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org> Change-Id: I59973226d57fe1dc3da21b2cec1c7b9a713829ab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/braswell: select GENERIC_GPIO_LIBMatt DeVillier
Needed for to-be-added Google Braswell boards which make use of common GPIO library function to determine installed RAM type. Change-Id: Ie9b0c6513f10b252bf0a5014bd038d24879421be Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07soc/intel/braswell: Fix SPI write after FLOCKDN is setHannah Williams
The SPI controller initialization in finalize_chipset was failing because FSP was setting FLOCKDN before finalize_chipset was called. Hence move finalize_chipset to get called from BS_POST_DEVICE so that it is called before FSP notify function-Ready To Boot state. TEST: run flashrom with -VVV and observe supported opcodes and SPI flash chip are reported correctly, and write/erase operations succeeed. Original-Change-Id: I3c0297f3f2258cf77cf00db367f11ff4d1d9dc77 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I690fb4bf9e78bb58811c704179ba8b8f25ce95cc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-03soc/intel/braswell/Kconfig: select RELOCATABLE_RAMSTAGEMatt DeVillier
Without RELOCATABLE_RAMSTAGE selected, S3 resume will hang under Linux and Windows. All other Intel SoCs have this selected by default, so this change simply corrects an omission on Braswell. TEST: boot Linux on google/cyan with and without RELOCATABLE_RAMSTAGE selected; observe that S3 resume fails without and succeeds with. Change-Id: I9071d9b4e3e3a156281d95fae059947c4c26f744 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-16soc/intel/braswell: Hide some Kconfig options in menuconfigArthur Heymans
Don't allow the user to set PCIe configspace base address. Don't allow the user to set the DCACHE size and base. Change-Id: I7a42cc5f6098214364624bcfa3cbd93b4903ee84 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-06-09soc/braswell: fix ACPI table by recollecting TOLMHarry Pan
cherry-pick from Chromium, commit 8fbe1e7 On Braswell and Baytrail devices, by userland 'perf top', observed demanding clocks on __vdso_clock_gettime() since chromeos_3.18 kernel; besides, evaluated massive calling of clock_gettime() cost, up to 700 ns in average. It turns out that Linux kernel of map_vdso() first call of remap_pfn_range() does not fall into reserve_pfn_range() due to size parameter, instead it relies on lookup_memtype() and potentially be failed to be identified as eligible RAM resource because the function of pat_pagerange_is_ram() actually walks through root's sibling. Meanwhile, on current BSW (and BYT) firmware implementation makes System RAM resources located on child leaf, combining all of these factors makes the kernel treat the vvar page of vdso as a uncached-minus one leading slow access in result. This patch recollects TOLM accessing; as Aaron recalled some core_msr_script turns off access to TOLM register, he suggests to store tolm to avoid getting back a zero while setting acpi nvs space. Original-Change-Id: Iad4ffa542b22073cb087100a95169e2d2a52efcd Original-Signed-off-by: Harry Pan <harry.pan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/368585 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Idc9765ec5c0920dc98baeb9267a89bec5cadd5a0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09soc/braswell: assign unique DMA request lines to I2C controllersMatt DeVillier
Each I2C controller should have a unique pair of DMA request lines, and DMA channels should be assigned incrementally, rolling over as necessary. Source: Intel Braswell UEFI reference code Change-Id: I1d97b5a07bf732c27caf57904c138b120b93ca81 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-09soc/braswell: fix scope for I2C ACPI devicesMatt DeVillier
For an unknown reason, the I2C ACPI devices were placed under \SB intead of \SB.PCI0, as with all other non-Atom based Intel platforms. While Linux is tolerant of this, Windows is not. Correct by moving I2C ACPI devices where they belong. Also, adjust I2C devices at board level for intel/strago and google/cyan as to not break compilation. Change-Id: Iaf8211bd86d6261ee8c4d9c4262338f7fe19ef43 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/20055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-08fsp/gop: Add running the GOP to the choice of gfx initNico Huber
The new config choice is called RUN_FSP_GOP. Some things had to happen on the road: * Drop confusing config GOP_SUPPORT, * Add HAVE_FSP_GOP to chipsets that support it, * Make running the GOP an option for FSP2.0 by returning 0 in random VBT getters. Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24soc/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/braswell: Fix most of the issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: that open brace { should be on the previous line ERROR: return is not a function, parentheses are not required WARNING: braces {} are not necessary for any arm of this statement WARNING: line over 80 characters WARNING: braces {} are not necessary for single statement blocks WARNING: Avoid unnecessary line continuations WARNING: break is not useful after a goto or return WARNING: else is not generally useful after a break or return False positives are generated by checkpatch for the following test: ERROR: Macros with complex values should be enclosed in parentheses TEST=Build for cyan Change-Id: I19048895145b138a63100b29f829ff446ff71b58 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18871 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for cyan Change-Id: Ib5c6a1bf5308a8add42d7371854b80ea53d7ae84 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18870 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Fix spacing issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxE) ERROR: spaces required around that '=' (ctx:WxV) ERROR: code indent should use tabs where possible WARNING: space prohibited between function name and open parenthesis '(' WARNING: please, no spaces at the start of a line TEST=Build for cyan Change-Id: I84d4204585b498b695608c5008fdfb7961e2416f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18869 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-01-16intel: Fix copy/paste error in license textMarshall Dawson
Change all instances of "wacbmem_entryanty" to "warranty". Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18136 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01lib: put romstage_handoff implementation in own compilation unitAaron Durbin
Instead of putting all the functions inline just put the current implementation into a C file. That way all the implementation innards are not exposed. Lastly, fix up the fallout of compilation units not including the headers they actually use. Change-Id: I01fd25d158c0d5016405b73a4d4df3721c281b04 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17648 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-08intel car: Remove references to DCACHE_RAM_ROMSTACK_SIZEKyösti Mälkki
Not referenced in code. Change-Id: Iea91f4418eb122fb647ec0f4f42cb786e8eadf23 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17268 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10Makefiles: Use $(MAINBOARD_DIR) instead of $(CONFIG_MAINBOARD_DIR)Martin Roth
The variable MAINBOARD_DIR already has the quotes stripped off. Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/16117 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-08chromeos chipsets: select RTC usageAaron Durbin
Since RTC is now a Kconfig ensure RTC is selected on the x86 chipsets which are in Chrome OS devices. This allows the eventlog to have proper timestamps instead of all zeros. BUG=chrome-os-partner:55993 Change-Id: I24ae7d9b3bf43a5791d4dc04aae018ce17fda72b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16086 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-15soc/intel/braswell: use common Intel ACPI hardware definitionsAaron Durbin
Transition to using the common Intel ACPI hardware definitions generic ACPI definitions. BUG=chrome-os-partner:54977 Change-Id: Ia3860fe9e5229917881696e08418c3fd5fb64ecc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15670 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2016-07-15soc/intel/braswell: don't duplicate setting ACPI sleep stateAaron Durbin
The ramstage main() in lib/hardwaremain.c has the logic to set the ACPI sleep state based on romstage_handoff. Thus, there's no need to do it a second time. Change-Id: I88af301024fd6f868f494a737d2cce14d85f8241 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15661 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2016-05-06soc/intel: indicate to build system that XIP_ROM_SIZE isn't usedAaron Durbin
The XIP_ROM_SIZE Kconfig variable isn't used for these chipsets. Therefore, indicate as such so that romstage can be placed in cbfs less rigidly. Change-Id: If5cae10b90e05029df56c282e8adf37fa0102955 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14626 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06{cpu,soc}/intel: remove unused smm_init() functionAaron Durbin
There used to be a need for an empty smm_init() function because initialize_cpus() called it even though nothing called initialize_cpus(). However, garbage collection at link time is implemented so there's no reason to provide an empty function to satisfy a symbol that is completely culled during link. Remove it. Change-Id: Ic13c85f1d3d57e38e7132e4289a98a95829f765a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14605 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06soc/intel/braswell: convert to using common MP and SMM initAaron Durbin
In order to reduce duplication of code use the common MP and SMM initialization flow. Change-Id: I65beefec53a29b2861433bc42679f3fa571d5b6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14593 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-04cpu/x86: remove BACKUP_DEFAULT_SMM_REGION optionAaron Durbin
Unconditionally provide the backup default SMM area API. There's no reason to guard the symbols behind anything since linker garbage collection is implemented. A board or chipset is free to use the code or not without needing to select an option. Change-Id: I14cf1318136a17f48ba5ae119507918190e25387 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14561 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02cpu/x86/mp_init: remove unused callback argumentsAaron Durbin
The BSP and AP callback declarations both had an optional argument that could be passed. In practice that functionality was never used so drop it. Change-Id: I47fa814a593b6c2ee164c88d255178d3fb71e8ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14556 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-04-30lib/reg_script: Allow multiple independent handlersLee Leahy
Remove the platform_bus_table routine and replace it with a link time table. This allows the handlers to be spread across multiple modules without any one module knowing about all of the handlers. Establish number ranges for both the SOC and mainboard. TEST=Build and run on Galileo Gen2 Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-04-14soc/intel: Update license headersMartin Roth
Update all of the license headers to make sure they are compliant with coreboot's license header policy. Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14321 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08x86 chipsets: utilize x86_setup_mtrrs_with_detect()Aaron Durbin
For all the chipsets which were performing the following sequence: x86_setup_fixed_mtrrs(); x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2); Replace that with x86_setup_mtrrs_with_detect() since it is equivalent. Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13936 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
This patch generalizes the approach previously used for ARM32 TTB_SUBTABLES to "auto-detect" whether a certain region was defined in memlayout.ld. This allows us to get rid of the explicit Kconfig for the TIMESTAMP region, reducing configuration redundancy and avoiding confusion when setting up future boards. (Removing armv4/bootblock_simple.c because it references this Kconfig and it is a dead file that I just forgot to remove in CL:12076.) BRANCH=None BUG=None TEST=Booted Oak and confirmed that all pre-RAM timestamps are still there. Built Nyan and Falco. Change-Id: I557a4b263018511d17baa4177963130a97ea310a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-31drivers/intel/fsp1_1: Fix spelling error in API and copyrightLee Leahy
Change granluarity to granularity. Change wacbmem_entryanty to warranty. Update copyright dates. TEST=None Change-Id: Ib7775cb33616751760919a5850777dc6f77a6be9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13528 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29soc/braswell: Fix Global NVS base addressHannah Williams
TEST=Boot to OS Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e Reviewed-on: https://review.coreboot.org/13506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-28soc/braswell: Add interface to program USB2_COMPBG registershkim
Add interface to program USB2_COMPBG register to set HS_DISC_BG and HS_SQ reference voltage for each project. TEST=Get build success and do EFT test Original-Reviewed-on: https://chromium-review.googlesource.com/300846 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Original-Tested-by: shkim <sh_.kim@samsung.com> Change-Id: If2201829e1a16b4f9916547f08c24e9291358325 Signed-off-by: Kenji Chen <kenji.chen@intel.com> Signed-off-by: shkim <sh_.kim@samsung.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12739 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell/acpi/DPTF: Write TCHG state on AC connect.Jenny TC
DPTF should update the charger cooling device state during boot time and every 3 seconds after boot. But 3 seconds polling doesn't seems to be working with current version of DPTF. This impacts charging since DPTF writes states 4 when charger is not connected at boot time. On connecting the charger, DPTF doesn't write 0 to enable charging. This issue is addressed by calling the PPPC function to read cooling device state and passing the value to SPPC to set cooling device state. This doesn't compromise safety since DPTF can override this value later based on the platform thermal condition. Also this provides additional safety measure in the unlikely event that DPTF crashes and is not re-spawned by OS. With this patch even after DPTF crashes, if the power adapter is plugged it would still allow the system to charge correctly. Original-Reviewed-on: https://chromium-review.googlesource.com/288460 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Change-Id: I50c7666b86e45d5ab537a9d4149e6c71eba04e50 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12729 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell/acpi: Fix CID1 offset in commentHannah Williams
Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I9fd2ebba985362fe8068c10390bb014cf9015ac5 Reviewed-on: https://review.coreboot.org/13483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix issues found during static code analysisRavi Sarawadi
TEST=Build, boot to OS Original-Reviewed-on: https://chromium-review.googlesource.com/299483 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Change-Id: I738003b8dfff6a5255085d39e378e18d6ad36bcf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/12738 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
Original-Reviewed-on: https://chromium-review.googlesource.com/312743 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ib0a891f229477cf359bff6cd02f305606468f07f Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: https://review.coreboot.org/12750 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Enable CA MirrorShobhit Srivastava
Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is enabled on this board CQ-DEPEND=CL:13038 Original-Reviewed-on: https://chromium-review.googlesource.com/309190 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12749 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Disable SD card detect simulation in FSPDivya Sasidharan
CQ-DEPEND=CL:13038 Debounce for SD card detect takes a long time and thus affects boot time. Disabling SD card detect simulation in FSP through UPD Original-Reviewed-on: https://chromium-review.googlesource.com/311850 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iab0794ec058460df94f6bbed5c9b0911e57e3a71 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Reviewed-on: https://review.coreboot.org/12742 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Set max frequency to be turbo frequencyHannah Williams
In set_max_freq, instead of using ratio from IA_CORE_RATIOS, using ratio from MSR_IACORE_TURBO_RATIOS Also, punit_init needs to be called before enabling this frequency. Original-Reviewed-on: https://chromium-review.googlesource.com/295268 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iabdab9ec45f8eef0a105a5a05dbcdb997b6764b0 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12736 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix DSP clockfdurairx
The codec clock frequency was incorrectly set to 25MHz. The only available frequency is 19.2MHz through external clock and PLL. Original-Reviewed-on: https://chromium-review.googlesource.com/295768 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5 Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com> Reviewed-on: https://review.coreboot.org/12732 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28drivers/intel/fsp1_1: Remove extra include referencesLee Leahy
Remove include references to the soc include directory which are not required to build the FSP driver. Remove "duplicate" include file definitions from file that include fsp/romstage.h. Move the definition of fill_power_state into soc/pm.h to ensure it is still available. TEST=Build and run on Galileo Change-Id: Ie519b3a8da8c36b47da512d3811796eab62ce208 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13436 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-27soc/braswell: Fix leakage on V1P8S railShobhit Srivastava
Tristate MMC1_RCLK pin to fix leakage on V1P8S rail. Original-Reviewed-on: https://chromium-review.googlesource.com/292043 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Change-Id: I76cc9211ba93b2596d3c0d772d99f8934656e01c Signed-off-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/12730 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-27soc/braswell: Add macro NATIVE_INT_PU20KHannah Williams
Change-Id: I04db02d37a76f0643a73ae4d67b839e5cd61f7e3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13054 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-26Braswell: Implement Gpio library functions to read RAMIDSubrata Banik
Added GPIO library code to allow all BSW board specific code to use memory configuration GPIOs in GPIO Input mode and read them to determine which memory type is on the board. Also added other GPIO related APIs to support GPIO access in BSW. Original-Reviewed-on: https://chromium-review.googlesource.com/294893 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Idd65136c0449f0cdebfae12a510985e29889fa2b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12735 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22soc/braswell: Add method for Wifi regulatory domainFelix Durairaj
Get the WRDD domain code from VPD and put it in global nvs. WRDD method in wifi.asl returns this value from global nvs. This wifi.asl should be included in dsdt.asl under the root port where wifi module resides. Original-Reviewed-on: https://chromium-review.googlesource.com/314373 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Change-Id: I809d28f10e80681471a785e604df102fb943a983 Signed-off-by: fdurairx <felixx.durairaj@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12745 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-19Braswell: add code to support customization of I2C data hold timeKane Chen
The I2C data hold time can be vary on different boards/devices. So, it needs to be customized by boards/devices TEST=compile ok and check IC_SDA_HOLD is changed if the hold time is defined in onboard.h Original-Reviewed-on: https://chromium-review.googlesource.com/308623 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I66c799de400670916cebbcb529d4f59d5b0f081b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/12740 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19soc/braswell: Remove the unneccessary functions from pcie.cShaunak Saha
Functions in file pcie.c is not needed. TEST=Boot and test wifi and video playback Original-Reviewed-on: https://chromium-review.googlesource.com/298965 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I70337c0fc61c221330836ef17f6cefea8c5f0f11 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/12737 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-14soc/braswell: Add CPUID for D0 steppingDivya Sasidharan
Original-Reviewed-on: https://chromium-review.googlesource.com/309122 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Ia24dbeb6b23ccbbb380843a4684def578cde168a Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Reviewed-on: https://review.coreboot.org/12727 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-14soc/braswell: Fix P-state tableSubrata Banik
Incorrect bus-core-ratio been used to generate P-state table Original-Reviewed-on: https://chromium-review.googlesource.com/290681 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I4a34ec80ff3f2ed46dc074c9f8fe06756db8b357 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/12731 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07intel/braswell: Disable IFD & ME by default so abuild can buildMartin Roth
The Braswell IFD & ME blobs aren't published in the 3rdparty repo, so disable them by default for now. Change-Id: If68ff1f37fbf7afb2f9eb1e5d9942afcf40ab1e3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12828 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-06intel/braswell: Build in both C0 and 'other' vbiosMartin Roth
The Braswell CPU seems to have two different Video BIOS roms, one for the C0 revision, and one for other revisions. Build them both into the coreboot image, and let coreboot sort out which one should be used at runtime. This should allow one rom to be used for all revisions. The initial reason for this patch was that the Kconfig symbol C0_DISP_SUPPORT didn't exist, and was causing issues. This seems like the best way to eliminate the need for that symbol. Change-Id: I5b9f225c0daf4e02fda75daf9cd07bb160bf0e0f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12826 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10ACPI: Fix IASL Warning about unused method for GBUF checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 640: If (CondRefOf (^GBUF, Local0)) { Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: Ie2f46808e92c309a63ba7661bcbd77402a08366a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12694 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-04braswell/skylake: Add FspUpdVpd.h to fix compilationStefan Reinauer
Imported from cros repo 18ae19c Change-Id: Ib88ac9b37d2f86d323b9a04cb17a5a490c61ff5b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12467 Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins)
2015-11-24soc/intel/braswell: Drop gfx_read_resources()Nico Huber
Drop the last remnant of vanished CONFIG_MARK_GRAPHICS_MEM_WRCOMB. Could not build test google/cyan and intel/strago due to lack of UEFI headers, OMG. Change-Id: I0b9eac5c040d24bab2b85e9b63042b6aaa9879d9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/12338 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-27FSP1_1: Always use common codeLee Leahy
Always use the common FSP code. Remove the FSP_RAM_INIT, FSP_ROMSTAGE, FSP_STACK and FSP_STAGE_CACHE Kconfig values. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ib3d015cb2dc257e46c2340cc7bc09cf0ffb0492c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5197b1354d138759dfaa428c665de6cbfb8e8911 Original-Change-Id: I3e3c1c9e6f73009a099c1ec3688dbd8c326fc766 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/306142 Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12158 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-10-27FSP 1.1: Replace soc_ prefix with fsp_Lee Leahy
Rename soc_display_upd_value to fsp_display_upd_value since the routine was moved from src/soc/intel/common into src/drivers/intel/fsp1_1. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ifadf9dcdf8c81f8de961e074226c349fb9634792 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 95238782702999a178989467694ac1f15c079615 Original-Change-Id: Ibd26ea41bd5c7a54ecd3c237f7fb7bad6dbf7d8a Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/306351 Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12157 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 17:59:19 +0000