| Age | Commit message (Collapse) | Author |
|---|
|
This fixes MP init on xeon_sp SoCs which was broken by 69cd729 (mb/*:
Remove lapic from devicetree).
Alderlake cpu code was linked in romstage but unused so drop it.
Change-Id: Ia822468a6f15565b97e57612a294a0b80b45b932
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Instead of having a magic entry in the CPU device ID table list to tell
find_cpu_driver that it has reached the end of the list, introduce and
use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is
compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID
instead of the 0 in the CPU_TABLE_END definition.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Instead of always doing exact matches between the CPUID read in
identify_cpu and the device entries of the CPU device ID table,
offer the possibility to use a bit mask in the CPUID matching. This
allows covering all steppings of a CPU family/model with one entry and
avoids that case of a missing new stepping causing the CPUs not being
properly initialized.
Some of the CPU device ID tables can now be deduplicated using the
CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0540b514ca42591c0d3468307a82b5612585f614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This simplifies the code flow of the cpu init. APL can do CPU init after
calling FSP-S, while GLK needs to do that before. This is now reflected
directly in the cpu ops rather than using
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT as a proxy.
Change-Id: I7fd1db72ca98f0a1b8fd03a979308a7c701a8a54
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>.
Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes a NULL pointer deref introduced by 69cd729 (mb/*: Remove
lapic from devicetree).
Change-Id: I816fddfe3efe3c3aefe1b2ee28426dc1e1f3c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72599
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the APL EDS vol 1 (doc 569262) to be able to implement common
code API to clear the power failure status bits.
Note: as per the EDS those newly added power management failure bits
are RO and shouldn't change any functionality of the existing APL SoC
code. The reason behind adding those macro definitions is to fix the
compilation issue due to code change targeted for the Intel SKL and
Xeon-SP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0bbf11ada2b2f8735173be69ad157b8055021126
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72130
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia8d35a5d104658b7900fde7f7b8c6f88530a614e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72129
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If44a07503470f57037b59d03eea830703a3c604a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72100
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Iccf37a340880e4b5a18f51c3add9a15a74e1d7b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72030
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using -Woverride-init command option.
Change-Id: I9f0755de9fae678fc5d78a709453fd1098d70e50
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
stdbool is added through types.h file.
Change-Id: I317faf322a7e73b706724802d99815ab50e655e2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3dfd7dd1de3bd27c35c195bd43c4a5b8c5a2dc53
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71522
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC specific implementation as DPTF driver can
now fillin those platform specific data using SoC specific macros.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If65976f15374ba2410b537b1646ce466ba02969b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This should only contain resources that the PCI domain uses. Stolen
memory prevents the PCI domain from allocating anything where it is.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1562396f0b747a81bbc584314956809bd3865ff9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66267
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI: Improve comments and unify code word spelling
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1efbe930d0b8daec7c7bd2c1d84a4a3a5cad2ffb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie6572638c6bbe910745de55afa44458fb6b8db9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66240
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8997f9c111142a908b60675023d1a7dd86d3632a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66238
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a4a05f9c764eecaac3d473ba612dca6cc81518f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove Top of Upper Usable DRAM Low from MCHC as it isn't needed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifdd8c9ba61c5b1c6b154369413470e431ce8f5b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66231
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current implementation of the MCRS had several issues with BARs
and MMCONF not being available:
[ 0.156231] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.165302] pci 0000:00:18.2: can't claim BAR 0 [mem 0xddffc000-0xddffcfff 64bit]: no compatible bridge window
[ 0.192896] pci 0000:00:18.2: BAR 0: assigned [mem 0x280000000-0x280000fff 64bit]
...
[ 0.138300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138300] PCI: not using MMCONFIG
[ 0.148014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.149674] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.149679] PCI: not using MMCONFIG
[ 0.155052] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
This new MCRS, tested on the Star Lite Mk IV, resolves these issues:
[ 0.158786] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.197391] pci 0000:00:1f.1: BAR 0: assigned [mem 0x280000000-0x2800000ff 64bit]
...
[ 0.138460] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138460] PCI: not using MMCONFIG
[ 0.150889] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152548] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib6fc58efc9aadb5828251e0260622dac7ea3ef2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66244
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch avoids hardcoding to the `use_eisa_hids` variable instead
relying on the SoC config to choose if the SoC platform supports
EISA HID.
If any SoC platform has the support then the `use_eisa_hids` variable
would be set to `true` based on the selection of `DPTF_USE_EISA_HID`
config.
Note: Prior to Tiger Lake, all DPTF devices used 7-character EISA
IDs. If selected, the 7-character _HIDs will be emitted,
otherwise, it will use the "new" style, which are regular
8-character _HIDs.
Ideally, the platform prior to Tiger Lake would set `use_eisa_hids`
to `true` and platform posts that would set `use_eisa_hids` to
`false`.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I869bebc8e17c1e65979ca3431308d69771a34fa3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch selects `HAVE_DPTF_EISA_HID` config for APL, CNL and JSL
platform.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ice01c5720ba7f15861899d89981225cb76f9fcd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71109
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch moves DPTF ACPI Device IDs into the header file (soc/dptf.h)
so that upcoming patches in this patch train can achieve more
common code.
TEST=Able to build and boot Google/Reef.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0ce956351afc06871c465b67f51cba8786ce52db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71104
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch makes the SoC specific callback code more readable by adding
`soc_` prefix into the `get_dptf_platform_info()`.
In nutshell this patch renames `get_dptf_platform_info()` to
`soc_get_dptf_platform_info()`.
TEST=Able to build Google/Rex without any compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27d6a146d5928e1742f82f85f51ad42656f46344
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This fixes the following error:
In file included from src/mainboard/siemens/mc_apl1/dsdt.asl:21:
src/soc/intel/apollolake/acpi/northbridge.asl:15:12: warning: '/*' within block comment [-Wcomment]
PXEN, 1, /* Enable */
^
Change-Id: I1173eed69847f4c3b307ce96d76fb7185dc2f85c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70767
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: Iab3215487d0a19e0791a78f953a8545dfae3d2dc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add the HIDs that Windows uses for the DPTF driver.
Change-Id: Ic0cb4a45b5ebaf777a09bed1e5836e8afd873657
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66013
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids the need to hardcode the IOAPIC ID.
Change-Id: I0965b511e71c58f1c31433bc54595a5fabb1c206
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70268
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Later soc/intel/common/smbus addresses TCO2_STS as a separate
16-bit register, while baytrail and braswell assumes 32-bit
wide TCO1_STS to extend as TCO2_STS.
In src/soc/intel/denverton_ns:
#define TCO2_STS_SECOND_TO 0x02
In soc/intel/baytrail,braswell:
#define SECOND_TO_STS (1 << 17)
Elsewehere
#define SECOND_TO_STS (1 << 1)
It's expected that we remove the first (1 << 17) case and only
access TCO2_STS as a separate 16-bit register. For now, use
unique names to avoid confusion.
Change-Id: I07cc46a9d600b2bf2f23588b26891268e9ce4de0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I098104f32dd7c66d7bb79588ef315a242c3889ba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also sort includes.
Change-Id: I7da9c672ee230dfaebd943247639b78d675957e4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Commit d9ef02ce (soc/intel/apollolake: Lock down Global SMI) breaks
SMM/SMI on Apollolake (but not Geminilake), so guard it accordingly.
TEST=build/boot google/reef, verify SMM/SMI/SMMSTORE functional.
Change-Id: I00cbe046b61e6c342f7961670478d0ca8d365c2e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9377c3b65aa342f754c303148b0b8d826d05bb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67662
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1f6e5344cab2af7aa6001b9ec0f07b043a9caa8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I7ddb4ea792b9a2153b7c77d2978d9e1c4544535d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
According to Intel document number 336561, GLK has UFS (0x1d),
so add the PCI interrupt.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I68bac590bd1a9a0b8213440e882c8f431f06c95f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67680
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Intel document number 336561, G, SD Card (0x1b)
does not exist on GLK, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6921fc3db430c76ec54cf832ce51c627a507385c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67679
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I14c5933b9022703c8951da7c6a26eb703258ec37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add SOC_INTEL_COMMON_PCH_CLIENT which is specific to Apollo
Lake. This is used to select the options that Apollo Lake
requires, without the ones specific to a PCH as Apollo Lake
doesn't have a PCH.
This change also enables SOC_INTEL_COMMON_PCH_LOCKDOWN for
Apollo Lake.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I084a05f904a19f3b7e9a071636659670aa45bf3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 7ef5376123d4d0ebb811795fcee1de7066f65a0f.
Reason for revert: It was merged before its dependencies so now master is broken.
Change-Id: Ia270efaed4f5c9d0c7b9761ae22dec55f57f74cf
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67285
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP-M is not run XIP so it can be compressed. This more than halves
the binary size. 364544 bytes -> 168616 bytes.
On the up/squared this also results in a 83ms speedup.
TESTED: up/squared boots.
Change-Id: Ic76b51f0f3007b59ccb9f76b6a57bb9265dab833
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie7d40395d754b2abdf9079d6ee5e8ab8c536d449
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67661
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I35185b498315511f3236758caebfe2f9c28fd04a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65039
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mono_time is now 64-bit, the utility functions interfacing with
mono_time should also be 64-bit so precision isn't lost.
Fixed build errors related to printing the now int64_t result of
stopwatch_duration_[m|u]secs in various places.
BUG=b:237082996
BRANCH=All
TEST=Boot dewatt
Change-Id: I169588f5e14285557f2d03270f58f4c07c0154d5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add the headers for 2.2.3.1, which includes the following changes
over 2.2.0.0:
• [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry
failure in less than 5 cycles when a USB2 Ethernet Dongle is
connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter
7.20.6 for new Register settings.
• [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini
Lake/Gemini Lake – R
• [Update] MRC new version update to 1.38.
• [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from
S4 issue with latest Wifi driver.
[Update] MRC new version update to 1.39. Included fix for
MinRefRate2xEnable and support for Rowhammer mitigation.
• [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This
change specific to DDR4 memory configuration.
• GLK Klocwork Fix
• [Update] MRC new version update to 1.40.
Added in a separate directory as the default. The 2.2.0.0 headers
were left and will be used for Google boards, as some offsets have
moved.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add the Shadow Registers from 2 through 5 and print information
from them accordingly. All values were taken from Intel document
number 571993.
Tested on the StarLite Mk III and the correct values are
shown:
[DEBUG] CSE: IBB Verification Result: PASS
[DEBUG] CSE: IBB Verification Done : YES
[DEBUG] CSE: Actual IBB Size : 88
[DEBUG] CSE: Verified Boot Valid : FAIL
[DEBUG] CSE: Verified Boot Test : NO
[DEBUG] CSE: FPF status : FUSED
Please note, the values shown are in an error state.
This replaces the Fuse check that is done via Heci, as this will only
work whilst the CSE is in a normal state.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8a9e7b329010fae1a2ed9c3fefc9765e617cdfe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
coreboot is unable to disable certain devices, whilst many are hidden
DPTF and SMBus are not. Set this to enabled chipset so that it is
enabled by default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85d74179b6fe3c6126566422f82f7b806f80d0c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If8af4657508f00feff8525b0135c7f73c1959965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the CSE, General Status and Miscellaneous registers and
print information from them accordingly. All values were taken
from Intel document number 571993.
Tested on the StarLite Mk III and the correct values are
shown:
[DEBUG] CSE: Working State : 2
[DEBUG] CSE: Manufacturing Mode : NO
[DEBUG] CSE: Operation State : 1
[DEBUG] CSE: FW Init Complete : NO
[DEBUG] CSE: Error Code : 3
[DEBUG] CSE: Operation Mode : 0
[DEBUG] CSE: FPF status : unknown
Please note, the values shown are in an error state.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1a5548132dadbb188a33a7ae30a0a1fa144d130f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Call heci_init to initialise all Heci devices and bring them to d0.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id2865b649331846fc119da7c4be56cc1fed56b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia81b4397c92f100abad9b1e974bbebfe49008439
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=None
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I2eb6e94e5d87bb19b11e27461e2b5bdaee9d59bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65691
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic2b9a22bc6c32030f960d59b2874be5459c3ba28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable PwrOptEnable FSP S UPD and hook it to the inverted value of
SataPwrOptimizeDisable to allow it to be disabled from the devicetree.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I056fd7b16dadb213b3326523b0c7943ce35b8dc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
There is a lot of going back-and-forth with the KiB arguments, start
the work to migrate away from this.
Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook Up SataPortsEnable to the devicetree. As the default value is 0,
set both [0] and [1] in all mainboards so they aren't affected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ica8cf9484a6e6fe4362eabb8a9a59fcaf97c1bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64524
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up C1e FSP S UPD which enables enhanced C-states, to
enhanced_cstates. This allows it to be enabled in the
devicetree with a value of "1" as the default is disabled.
C1e exists on both APL and GLK, and has been there since their
initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie803a75ac9fb64a6c21b31baeea7b736e4fbf5fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Hook up FSP S UfsEnabled UPD (1d.0) to devicetree.
UFS only exist on GLK, and has been there since its
initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1976bfd340c728c64aaf36d296ac41dcd47bfc61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow configuring the LPC IO registers in the devicetree with:
* gen1_dec
* gen2_dec
* gen3_dec
* gen4_dec
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2a7ab3faf927cda76640227feff4e19017442897
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set all FSP S UPDs that set IDs to 0, which allows them to be set
by coreboot.
Tested on StarLite Mk IV and LPC now has the correct device ID of
0x31e8, where previously it had 0x7270.
The UPDs differ APL and GLK, but the ones configured in this patch
have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I034c9dc9d81c4d775dfff0994c9a6be823689b1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Both APL and GLK have 3 Heci devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7dc7afb4d2906838a478083b466b36aa78ec49a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch brings the feature of disabling RAPL to common code. It
replaces the current solution for APL and EHL.
For special case if RAPL disabling is only working via changes in MCHBAR
a new config switch was introduced.
Test: Boot mc_apl4/5 with this patch and ensure that the
relevant bits in MSR 0x610 are the same as before the
patch.
Change-Id: I2098ddcd2f19e3ebd87ef00c544e1427674f5e84
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch implements a SoC overrides to set CPU privilege level
as the MSR is not consistent across platforms. For example:
On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4584516102560e6bb2a4ae8c0d036be40ed96990
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Since the FIT pointer is patched at runtime there is no guarantee that
the pre-defined one will match the patched one. Add a check and print a
warning at runtime if both addresses (pre-defined and patched) do not
match as in this case an offline computed hash for the bootblock will
differ from the runtime one.
Change-Id: Ib1b02ec43af183caa9f5b08b3c485879b423c40f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Before TXE releases the CPU out of reset a pointer to the constructed
FIT in SRAM is patched into the loaded bootblock at offset 4G - 64B.
Since this patched bootblock gets measured during runtime it will not
match the one that is potentially measured from the coreboot image.
This patch adds a dedicated fit.c file for Apollo Lake where the FIT
pointer is already set to the address TXE will be using at runtime.
Test=Compare sha256 sum from coreboot runtime and coreboot.rom of the
bootblock and make sure they match.
Change-Id: Ia0fd2a19517c70f50ef37e6a2dc2408bae28df10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On Apollo Lake the bootblock is stitched into the IBBL IFWI region at
build time. At execution time TXE loads this IBBL into a shared SRAM
(which is read-only in this phase) and maps it at 4 GiB - 32 KiB. Then
the CPU starts to operate from this shared SRAM as it were flash space.
In order to provide a reliable CRTM init, the real executed bootblock
code needs to be measured into TPM if VBOOT is selected. This patch adds
the needed code to do this.
Change-Id: Ifb3f798de638a85029ebfe0d1b65770029297db3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On platforms where the bootblock is not included in CBFS anymore
(because it is part of another firmware section (IFWI or a different
CBFS), the CRTM measurement fails.
This patch adds a new function to provide a way at SoC level to measure
the bootblock. Following patches will add functionality to retrieve the
bootblock from the SoC related location and measure it from there.
In this way the really executed code will be measured.
Change-Id: I6d0da1e95a9588eb5228f63151bb04bfccfcf04b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since the fast SPI controller is hidden on Apollo Lake the OS cannot
probe it and is therefore unaware of the reserved resources assigned in
coreboot. Select 'FAST_SPI_GENERATE_SSDT' to enable SSDT creation to
report the reserved resources to the OS.
Change-Id: I23e77a0a01141dc4f299988d19509e6df555a654
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I37d31598e87e5b625ded3186980e3aba7dcf6440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Hook Timer8254ClkSetting to `legacy_8254_timer` cmos option. If that
isn't set, fallback to the `USE_LEGACY_8254_TIMER` Kconfig option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f91cc2c8f48e9da47399059386092314b631b08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There are two APL specific config switches for RAPL and min. cpu clock
(APL_SKIP_SET_POWER_LIMITS, APL_SET_MIN_CLOCK_RATIO). These switches
could be used in future in other CPU platforms. Move them to common code
instead of having them just for one SOC.
Test: Make sure that the clock ratio (MSR 0x198) and the RAPL settings
(MSR0x610) do not change with this patch applied on mc_apl{1,4,5}
mainboard.
Change-Id: I3d63d1b9b6c96586a3c20bf8c1d8001b1d7c4bed
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/pae.h>' -- src/) <(git grep -l 'memset_pae\|MEMSET_PAE_\|MAPPING_ERROR\|map_2M_page\|paging_identity_map_addr\|paging_enable_for_car\|paging_set_default_pat\|paging_set_pat\|PAT_ENCODE\|PAT_UC_MINUS\|PAT_WB\|PAT_WP\|PAT_WT\|PAT_WC\|PAT_UC\|paging_set_nxe\|paging_disable_pae\|paging_enable_pae\|paging_enable_pae_cr3' -- src/)
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If0f69fa8fe4a336b4e4d2a148d1e7a911af3c2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
The bootblock is loaded from IFWI so there is no need to have it in
cbfs.
Also remove the FIT handling as that is also handled by the IFWI.
TESTED: up/squared still boots
Change-Id: I8e70e080765dd7306074a8cf71c8795b8fbbb8a2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63225
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This also adds messages when adding the files.
Change-Id: Ie812084cc243a18cbc2913804ef2190dd9d6ed9b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch decouples HECI disabling interface a.k.a SMM or PCR or PMC
IPC etc. from DISABLE_HECI1_AT_PRE_BOOT kconfig as Intel ME BWG
recommends to disable the CSE PCI device while CSE is in
software temporary disable state.
BUG=b:228789015
TEST=Able to build google/redrix.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I66abc04d5e195515165a77b0166d004f17d029e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change-Id: I529c822c9e952dae6613d3de64f6709e0fd9b385
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Break TPM related Kconfig into the following dimensions:
TPM transport support:
config CRB_TPM
config I2C_TPM
config SPI_TPM
config MEMORY_MAPPED_TPM (new)
TPM brand, not defining any of these is valid, and result in "generic" support:
config TPM_ATMEL (new)
config TPM_GOOGLE (new)
config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE)
config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE)
What protocol the TPM chip supports:
config MAINBOARD_HAS_TPM1
config MAINBOARD_HAS_TPM2
What the user chooses to compile (restricted by the above):
config NO_TPM
config TPM1
config TPM2
The following Kconfigs will be replaced as indicated:
config TPM_CR50 -> TPM_GOOGLE
config MAINBOARD_HAS_CRB_TPM -> CRB_TPM
config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL
config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE
config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM
config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit 1a4496e79f21 (soc/{apl,glk}: Allow to select the primary graphics
device) adds code to set the FSP parameter 'PrimaryVideoAdaptor' based
on the enum description of the FspmUpd.h for Apollo Lake.
Unfortunately, the comment in the header file does not match the
implementation in the FSP and hence setting PrimaryVideoAdaptor to
'GPU_PRIMARY_IGD' will be treated as if the selection was
'GPU_PRIMARY_PCI'. This in turn leads to Linux gfx driver issues for
earlier driver implementations.
This commit corrects the enum values for the FSP parameter to match the
implementation.
TEST=Boot into Linux on mc_apl1 and verify that graphics works.
Change-Id: Iedbc144fa809f6d4587f5223b235ee95579c48f7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
On platforms using UDK2015 select UDK2017 instead.
This allows to drop UDK2015 headers.
Tested using timeless builds: The produced binaries are identical.
Change-Id: Ia6032c6520ec889cd63655db982d9bfa476dc24d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch moves `pmc_clear_pmcon_sts` function into common code and
remove SoC specific instances.
Accessing PMC GEN_PMCON_A register differs between different Intel
chipsets. Typically, there are two possible ways to perform GEN_PMCON_A
register programming (like `pmc_clear_pmcon_sts()`) as:
1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration
register.
2. Using MMIO access when GEN_PMCON_A is a memory mapped register.
SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to
perform GEN_PMCON_A register programming using PMC MMIO.
BUG=b:211954778
TEST=Able to build brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeff Daly <jeffd@silicom-usa.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The patch implements below changes:
1. Implements different error codes and use them in appropriate
failure scenarios of below functions:
a. heci_send()
b. recv_one_message()
c. heci_receive()
2. As heci_send_receive() is updated to return appropriate error codes
in different error scenarios of sending and receiving the HECI
commands. As the function is updated to return 0 when success, and
non-zero values in the failure scenarios, so all caller function have
been updated.
BUG=b:220652101
TEST=Verified CSE RX and TX APIs return error codes appropriately in
the simulated error scenarios.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ibedee748ed6d81436c6b125f2eb2722be3f5f8f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hook up vtd_enable to CMOS value of "vtd".
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16b43f0489f652d650e820c36b2b9bea61cf3c8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This solved the error:
i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
i801_smbus 0000:00:1f.1: PCI INT A: not connected
i801_smbus 0000:00:1f.1: SPD Write Disable is set
i801_smbus 0000:00:1f.1: SMBus using polling
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Idebd581b7ed6d193d83340b7dc94248df43525c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Hook PCH_DEVFN_CNVI (0c.0) to CnviMode.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8b51e98952a39bd432e9bc63eea57a40dd6cf106
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with
PCI_{DID,VID}_ using the commands below, which also take care of some
spacing issues. An additional clean up of pci_ids.h is done in
CB:61531.
Used commands:
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g'
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g'
Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000,
so define this once in arch/x86 and include this wherever needed. The
old AMD AGESA code in vendorcode that has its own definition is left
unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common
definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Allow configuring the limited fields that FSP-S provides.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I56c37338eaa978fdb2c63807331493e8aecbdf60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates alias for GEN_PMCON_A to maintain parity with other
IA SoC PMC register definitions.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id9a23c58a325cb544c50cbda432fe3117eea22fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch renames all FSP Notify Phase API configs to primarily remove
"SKIP_" prefix.
1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM ->
USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM
2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT ->
USE_FSP_NOTIFY_PHASE_READY_TO_BOOT
3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE ->
USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE
The idea here is to let SoC selects all required FSP configs to execute
FSP Notify Phase APIs unless SoC deselects those configs to run native
coreboot implementation as part of the `.final` ops.
For now all SoC that uses FSP APIs have selected all required configs
to let FSP to execute Notify Phase APIs.
Note: coreboot native implementation to skip FSP notify phase API (post
pci enumeration) is still WIP.
Additionally, fixed SoC configs inclusion order alphabetically.
BUG=b:211954778
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The address space allotted to MCRS in the northbridge needs to be exclusive
of the address space allotted to the GPIO controllers in the southbridge,
otherwise Windows complains of overlapping resource ranges and disables
the GPIO controllers. To prevent overlap, use CONFIG_PCR_BASE_ADDRESS
to set the upper bound of MCRS rather than MMCONF.
Test: boot Windows 10/11 on google/{reef,ampton} and verify that
GPIO controllers are indicated as without fault in Device Manager.
Change-Id: I2117054edb448e717b7cbe80958c9c4e6c996e2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
|
|
This patch adds an SoC function to clear GEN_PMCON_A status bits to
align with other IA coreboot implementations.
BUG=b:211954778
TEST=None.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I982f669b13f25d1d0e6dfaec2fbf50d3200f74fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
