summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2023-06-09soc/amd: add ops xhci_pci_ops to XHCI controllers in devicetreeFelix Held
Instead of adding the new PCI IDs of the XHCI controllers in every new chip generation to the pci_xhci driver, bind the driver to the internal PCI devices of the XHCI controllers via the device ops statement in the chipset devicetree. The PCI device function of the XHCI2 controller in Mendocino can be either a dummy device or the XHCI controller, so the device ops are attached to that device in the mainboard devicetree instead. The Glinda code is right now just a copy of the Mendocino code, so it'll change in the future, but for consistency the equivalent changes to those in Mendocino are applied there too. Since the device ops are now attached to the devices via the static devicetree entry, also remove both the xhci_pci_driver struct and the amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c. TEST=SSDT entries for the XHCI controllers are still generated on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-08soc/amd/stoneyridge/acpi/northbridge: drop _STA method from PCI0 scopeFelix Held
The PCI root complex itself isn't on an enumerable bus, so without providing an _STA method, the device will still be assumed to be present and visible, so this won't change behavior. This also brings Stoneyridge more in line with the newer SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I663c7bcba89ffe25d0819d83461cb95e10f49028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75671 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-08soc/amd/picasso/acpi/northbridge: drop _STA method from PCI0 scopeFelix Held
The PCI root complex itself isn't on an enumerable bus, so without providing an _STA method, the device will still be assumed to be present and visible, so this won't change behavior. This also brings Picasso more in line with Cezanne and newer SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Change-Id: Ied48b48113f6e871e90d17cbd216be003f05b5ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/74993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-08soc/amd/phoenix: Hook up xhci ops in chipset.cbEric Lai
Hook up xhci ops for Phoenix xHCI device. Benefit is we don't have to bother by adding xhci DID. BUG=b:285981912 TEST=check coreboot log shows below. [INFO ] \_SB.PCI0.GP41.XHC0.RHUB.SS01: USB3 Type-A Port A0 (MLB) Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib59874948725966b04b54def3f6de463afeda709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-07soc/amd/*/root_complex: use VGA_MMIO_* definesFelix Held
Replace the magic constants by using defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I16179a37b6ee19bc3b4862b7dcb3bbc4caf63f2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-07soc/amd/stoneyridge/acpi/sb_pci0_fch: use VGA_MMIO_* definesFelix Held
Replace the magic constants by using defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94ad285a2c5712d352d4f92697fc3140847d88de Reviewed-on: https://review.coreboot.org/c/coreboot/+/75667 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/stoneyridge/northbridge: use VGA_MMIO_* definesFelix Held
Replace the magic constants by using defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6303e5a697a7ad09a48cb7a2c79fa76f4c6ce232 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-07soc/amd/glinda/acpi: use ROOT_BRIDGE macroFelix Held
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The soc/amd/common/acpi/lpc.asl file which was included in the now removed pci0.asl file now gets included in the correct scope in the soc.asl file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I373c171f7f4754391012b41d44965561ced4f0b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75595 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/phoenix/acpi: use ROOT_BRIDGE macroFelix Held
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The soc/amd/common/acpi/lpc.asl file which was included in the now removed pci0.asl file now gets included in the correct scope in the soc.asl file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If293188fc8d0ff41b47ab84c9655333e9ebe58e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-07soc/amd/mendocino/acpi: use ROOT_BRIDGE macroFelix Held
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The soc/amd/common/acpi/lpc.asl file which was included in the now removed pci0.asl file now gets included in the correct scope in the soc.asl file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6fc4b09f79e633208ab7536543c876c2c6129eb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75593 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/cezanne/acpi: use ROOT_BRIDGE macroFelix Held
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The soc/amd/common/acpi/lpc.asl file which was included in the now removed pci0.asl file now gets included in the correct scope in the soc.asl file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia8f0f1619a71f4ab2051714a9d8c7eb200845390 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75592 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/stoneyridge/acpi: rename sb_fch.asl to mmio.aslFelix Held
This file only contain the ACPI code describing the MMIO devices in the FCH, so rename it to mmio.asl. This also brings the Stoneyridge ACPI code a bit more in line with the ACPI code of the other SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iccef1fc5230e3e104d8dea586a9cbaf894471c12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75597 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/stoneyridge/acpi: use ROOT_BRIDGE macroFelix Held
Instead of having the different static parts of the PCI0 device in northbridge.asl and sb_pci0_fch.asl, instantiate the static parts of the PCI0 device via the ROOT_BRIDGE macro in soc.asl. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4a9af2fd853f4e993e71158c5e85052084b50cdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/75596 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-07soc/amd/picasso/acpi: rename sb_fch.asl to mmio.aslFelix Held
This file only contain the ACPI code describing the MMIO devices in the FCH, so rename it to mmio.asl. This also brings the Picasso ACPI code a bit more in line with the ACPI code of the newer SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64490ba8e34ae1fbe6aea1ab6496b5b04ac4d0aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/75591 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/picasso/acpi: move remaining parts of sb_pic0_fch.asl to soc.aslFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I785abfc90c99b58c11d57847573f550fcea1f774 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-07soc/amd/picasso/acpi: use ROOT_BRIDGE macroFelix Held
Instead of having the different static parts of the PCI0 device in northbridge.asl and sb_pci0_fch.asl, instantiate the static parts of the PCI0 device via the ROOT_BRIDGE macro in soc.asl. TEST=Both Ubuntu 2022.4 and Windows 10 still boot successfully and don't show any new ACPI-related error. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2587d8bb270dc3edce9dfa570a5018116fc9187f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-07soc/amd/common/acpi/pci_root: introduce ROOT_BRIDGE macroFelix Held
When instantiated in the DSDT, this macro will expand to the static part of the PCIe root bridge device. This macro allows both to deduplicate parts of the DSDT code as well as adding more than one PCIe root bridge device in the DSDT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I6f20d694bc86da3c3c9c00fb10eecdaed1f666a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75568 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/common/acpi: move acpi_fill_root_complex_tom to StoneyridgeFelix Held
Now that Stoneyridge is the only AMD SoC that still needs the part of the SSDT that contains the TOM1 and TOM2, move it from the common code to the Stoneyridge northbridge code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9091360d6a82183092ef75417ad652523babe075 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75564 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-07soc/amd/glinda/chip: use common data fabric domain resource codeFelix Held
Use the new common AMD code that gets the usable non-fixed MMIO windows from the data fabric MMIO decode registers and generate the PCI0 _CRS ACPI code based on those regions. For a more detailed description see the corresponding patch that changes the Picasso code to use this new code. In contrast to the Picasso code, this change will drop the unneeded _STA method inside the PCI0 scope which wasn't present in Picasso's ACPI code before it got replaced by the SSDT that gets generated by amd_pci_domain_fill_ssdt. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I948d882b2e2c6d19f73c0be094e4ff6e42ec81d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75560 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-07soc/amd/phoenix/chip: use common data fabric domain resource codeFelix Held
Use the new common AMD code that gets the usable non-fixed MMIO windows from the data fabric MMIO decode registers and generate the PCI0 _CRS ACPI code based on those regions. For a more detailed description see the corresponding patch that changes the Picasso code to use this new code. In contrast to the Picasso code, this change will drop the unneeded _STA method inside the PCI0 scope which wasn't present in Picasso's ACPI code before it got replaced by the SSDT that gets generated by amd_pci_domain_fill_ssdt. BUG=b:283495475 TEST=Myst still boots and both the coreboot console and the kernel show the expected PCI MMIO ranges being used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I425876c4ef470574e00e123d36101641240c98cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/75559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-07soc/amd/mendocino/chip: use common data fabric domain resource codeFelix Held
Use the new common AMD code that gets the usable non-fixed MMIO windows from the data fabric MMIO decode registers and generate the PCI0 _CRS ACPI code based on those regions. For a more detailed description see the corresponding patch that changes the Picasso code to use this new code. In contrast to the Picasso code, this change will drop the unneeded _STA method inside the PCI0 scope which wasn't present in Picasso's ACPI code before it got replaced by the SSDT that gets generated by amd_pci_domain_fill_ssdt. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iad34d74d9f6cbed1d8a71a561a505f563e31db18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-07soc/amd/cezanne/chip: use common data fabric domain resource codeFelix Held
Use the new common AMD code that gets the usable non-fixed MMIO windows from the data fabric MMIO decode registers and generate the PCI0 _CRS ACPI code based on those regions. For a more detailed description see the corresponding patch that changes the Picasso code to use this new code. In contrast to the Picasso code, this change will drop the unneeded _STA method inside the PCI0 scope which wasn't present in Picasso's ACPI code before it got replaced by the SSDT that gets generated by amd_pci_domain_fill_ssdt. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b14ee0682ae1f2212ab43977c076687706434ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/75557 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-07soc/amd/common/data_fabric/domain: write _BBN method in SSDTFelix Held
Instead of having PCI0's _BBN method in the DSDT that always returns 0, use acpigen_write_BBN to generate the _BBN method that returns the first PCI bus number in the PCI domain/host bridge. TEST=On mandolin the _BBN method in the _SB/PCI0 scope is now in the SSDT instead of the DSDT, but still returns 0. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8badeb0064b498d3f18217ea24bff73676913b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74992 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/picasso/chip: use common data fabric domain resource codeFelix Held
Use amd_pci_domain_read_resources function that gets the configured MMIO regions for the PCI root domain from the data fabric's MMIO decode registers instead of using pci_domain_read_resources. This results in the same IO port range being used by the allocator, but makes sure that the allocator will only allocate non-fixed MMIO resources in the address ranges that get decoded to the PCI root complex. In order for the PCI0 _CRS ACPI resource template to match the decoded PCI root domain MMIO windows, use amd_pci_domain_fill_ssdt to generate the _CRS ACPI code instead of having a mostly hard-coded _CRS method in the DSDT. This makes sure that the OS will know about the MMIO regions it is allowed to used. Before this patch, only the region from TOM1 to right below CONFIG_ECAM_MMCONF_BASE_ADDRESS was advertised as usable PCI MMIO in the PCI0 _CRS method. Also the resource allocator didn't get any constraint on which address ranges it can use to put the non-fixed MMIO resources. This approach worked until now, since all address range from 0 up to right below TOM1 was filled with either usable or reserved memory and the allocator was allocating beginning right from TOM1, since it was using the bottom-up allocation approach and everything below TOM1 was already in use. The MMIO region from TOM1 to right below CONFIG_ECAM_MMCONF_BASE_ADDRESS also matched the MMIO decode window configured in the data fabric's MMIO decode registers, so everything seemed to work fine. However, when either selecting RESOURCE_ALLOCATION_TOP_DOWN or enabling above 4GB MMIO, things broke badly. This was partially due to the allocator putting non-fixed MMIO resources in regions that weren't decoded to the PCI root, since AMD family 17h and 19h silicon doesn't subtractively decode PCI MMIO and the wrong ranges the allocator used also weren't advertised in ACPI. TEST=Even when selecting RESOURCE_ALLOCATION_TOP_DOWN that usually ends up with a non-working system when the MMIO ranges aren't reported correctly to the resource allocator due to the reasons descried above, Ubuntu 22.04 LTS still boots on Mandolin both with SeaBIOS and EDK2 payload and Windows 10 boots with EDK payload. There's however an EDK2 bug that results the MMCONFIG region not being advertised in the e820 table, which causes Linux to not use the MMCONFIG and fall back to the legacy PCI config access method. This only happens with EDK2 payload and everything works fine when using SeaBIOS as payload. That e820 issue is unaffected by this patch. At the end of the data_fabric_set_mmio_np call, this is the data fabric MMIO register configuration: === Data Fabric MMIO configuration registers === idx base limit control R W NP F-ID 0 fc000000 febfffff 93 x x 9 1 10000000000 ffffffffffff 93 x x 9 2 d0000000 f7ffffff 93 x x 9 3 fed00000 fedfffff 1093 x x x 9 4 0 ffff 90 9 5 0 ffff 90 9 6 0 ffff 90 9 7 0 ffff 90 9 The limit of the data fabric MMIO decode register 1 is configured as 0xffffffffffff although this is way beyond the addressable memory space. add_data_fabric_mmio_regions fixes this up, so the range that gets passed to the allocator in that case is 0x7fcffffffff which takes both the reserved most significant address bits used for the memory encryption and the 12GB reserved data fabric MMIO at the top of the usable address space into account. This results in the following domain ranges passed to the resource allocator: DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done DOMAIN: 0000 mem: base: fc000000 size: 0 align: 0 gran: 0 limit: febfffff DOMAIN: 0000 mem: base: 10000000000 size: 0 align: 0 gran: 0 limit: 7fcffffffff DOMAIN: 0000 mem: base: d0000000 size: 0 align: 0 gran: 0 limit: f7ffffff The IO resource producer region is split into two parts to not cover the PCI config IO region resource consumer. This results in these resources being added to the PCI0 _CRS resource template: amd_pci_domain_fill_ssdt ACPI scope: '\_SB.PCI0' PCI0 _CRS: adding busses [0-3f] PCI0 _CRS: adding IO range [0-cf7] PCI0 _CRS: adding IO range [d00-ffff] PCI0 _CRS: adding MMIO range [fc000000-febfffff] PCI0 _CRS: adding MMIO range [10000000000-7fcffffffff] PCI0 _CRS: adding MMIO range [d0000000-f7ffffff] PCI0 _CRS: adding VGA resource Kernel version 5.15.0-43 from Ubuntu 2022.4 LTS prints this in dmesg: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-3f] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window] pci_bus 0000:00: root bus resource [mem 0x10000000000-0x7fcffffffff window] Another noteworthy thing I wasn't aware of at first when testing ACPI changes on Windows 10 is that a normal Windows shutdown and boot cycle won't result in it processing the changed ACPI tables; you have to tell it to reboot to do a proper full boot where it will process the updated ACPI tables (and fail if it dislikes something about the ACPI tables and bytecode). Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia24930ec2a9962dd15e874e9defea441cffae9f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74712 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-07soc/amd/common/data_fabric/domain: provide amd_pci_domain_fill_ssdtFelix Held
Generate the PCI0 _CRS ACPI resource template to tell the OS which PCI bus numbers and IO and MMIO regions can be used for PCI devices below _SB/PCI0. This data corresponds to what amd_pci_domain_scan_bus and amd_pci_domain_read_resources provided to the resource allocator. This makes sure that the PCI0 _CRS ACPI resource template matches the constraints the resource allocator used when allocating resources. TEST=With also the rest of the current patch train applied, the generated _CRS resource template contains the expected PCI bus numbers and IO and MMIO resources and both Linux and Windows boot on Mandolin. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf6d38a8ef5bb0163c4d1c021bf892c323d9a448 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74843 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-07soc/amd/common/data_fabric/domain: provide scan_bus and read_resourcesFelix Held
Provide amd_pci_domain_scan_bus to enumerate the PCI buses in the one PCI root domain and amd_pci_domain_read_resources to read the MMIO regions that the resource allocator can use to allocate the PCI MMIO BARs in the one PCI root domain from the corresponding data fabric MMIO decode registers. This makes sure that the allocator will only put PCI MMIO resources in areas that are decoded to the PCIe root complex. The current code only covers the case of a system with one PCI root where all PCI bus numbers belong to the only PCI root, all IO ports get decoded to the only PCI root and the MMIO regions from the data fabric MMIO decode registers get decoded to the only PCI root. In future patches, this will be extended to also support the multi PCI root case. TEST=With also the rest of the current patch train applied, the resource allocator uses the constraints on the MMIO regions and both Linux and Windows boot on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4aada7c8a2a43145ad08d11d0a38d9cdc182b98e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74717 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/common/block/cpu/noncar: add get_usable_physical_address_bits()Felix Held
In case the secure memory encryption is enabled, some of the upper usable address bits of the host can't be used any more. Bits 11..6 in CPUID_EBX_MEM_ENCRYPT indicate how many of the address bits are taken away from the usable address bits in the case the secure memory encryption is enabled. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia810b0984972216095da2ad8f9c19e37684f2a2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75623 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/common/block/cpu/noncar/cpu: add missing types.h includeFelix Held
types.h provides uint32_t via a chain include. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I875e3bb096b56bbea862c9ad0e3e14e025e3298b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75622 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-06soc/amd/stoneyridge/northbridge: reserve PCI config IO portsFelix Held
This makes sure that the resource allocator won't use those ports for anything else. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I014ffe3ee94ec153e91113f9a17e89f24ca040b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75619 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-06soc/amd/*/root_complex: reserve PCI config IO portsFelix Held
This makes sure that the resource allocator won't use those ports for anything else. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie42260902ee2b383dd5867ac813cae029f706f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-06soc/amd/phoenix: Update USB device aliasEric Lai
Follow 57263_FP8_MBDG_rev_0_92 Table.57 to update the alias. We can match the schematic for now. BUG=b:285793461 TEST=USB still works. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Id1058279fe5b0e3131608a0b9bbd708dbbde7e87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-06-05soc/amd/mendocino: Print content of manifest fileGrzegorz Bernacki
This adds printing content of 'manifest' file at ramstage. It allows to learn about blobs version used to build the coreboot binary, which is useful when investigating bugs. Version data are stored in CBFS file, which was generated during coreboot build. If AMD FW blobs will be manually replaced in coreboot image, versions from CBFS file are no longer valid. Log: AMDFW blobs version: type: 0x01 ver:00.3c.01.18 type: 0x08 ver:00.5a.28.00 type: 0x30 ver:2b.25.b0.10 type: 0x73 ver:00.3c.01.18 BUG=b:224780134 TEST=Tested on Skyrim device Change-Id: I8df54b74cd987b4a3be635932d38ea178d0b0311 Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74269 Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-02soc/amd/common/block/graphics: Add missing pci_rom_free()Grzegorz Bernacki
pci_rom_probe() can allocate memory when mapping a CBFS file, so pci_rom_free() should be called before leaving the function. BUG=b:278264488 TEST=Build and run with additional debug prints added to confirm that data are correctly unmapped Change-Id: Ie6fbbfd36f0974551befef4d08423a8148e151e7 Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74779 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
2023-06-02soc/amd/common/block/cpu: Refactor ucode allocationGrzegorz Bernacki
Move microcode load/unload to pre_mp_init and post_mp_init callbacks. It allows to make sure that ucode is freed only if all APs updated microcode. BUG=b:278264488 TEST=Build and run with additional debug prints added to confirm that data are correctly unmapped Change-Id: I200d24df6157cc6d06bade34809faefea9f0090a Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-06-02soc/amd/phoenix/Kconfig: Prevent changes to AMD_FWM_POSITION_INDEXFred Reitberger
The phoenix SoC does not support multiple EFS locations. Set the default to the only valid value and prevent mainboard overrides by making the option non-user-configurable. TEST=build birman-phoenix Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I0f720dbadf2d28a3c39daa4bd653a407be4893d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-06-02soc/amd/mendocino: Add manifest generation to MakefileGrzegorz Bernacki
This adds manifest generated by amdfwtool to CBFS. BUG=b:224780134 TEST=Tested on Skyrim device Change-Id: I13c9d322735e0979484b120c665fb100cf187eab Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74267 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-06-01mb/google/guybrush: Move helper AOAC for console to AOAC headerKonrad Adamczyk
BUG=b:217968734 TEST=Build guybrush firmware Change-Id: I93dfa50cd1116e0f6652186acb37fd43d638cf84 Signed-off-by: Konrad Adamczyk <konrada@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75491 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31soc/amd/picasso/acpi/sb_pci0_fch: replace Memory32Fixed with DWordMemoryFelix Held
This brings the ACPI code more in line with both what the new code for the AMD SoCs will do and also what the current Intel code does. This was mainly done to have a reduced delta to the new AMD domain resource handling functions to debug it, but it might still be useful to upstream this change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8cca05976b1c9d4e994e407b8c0197da7dd35eb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-05-30soc/amd/phoenix/Kconfig: use lower case hex digits in VGA_BIOS_IDFelix Held
cbfs_boot_map_optionrom will generate lower case hex digits for the filename to look for in CBFS, so make sure that the file name will use lower case hex digits and no upper case hex digits. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1d4daa04120de0f2c853a44691b7e2c52eb2af20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75483 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-27soc/amd/common/block/psp: Unmap EFS region after useKarthikeyan Ramasubramanian
EFS header is mapped during PSP verstage and bootblock to read some SPI configuration. After use it is left unmapped. Unmap the EFS region after use. BUG=b:240664755 TEST=Build and boot to OS in Skyrim with unsigned PSP verstage. Change-Id: I865f45a3d25bc639eb8435b54aa80895ec4afd27 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75455 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-27soc/amd/mendocino/psp_verstage: Fix pending mapsKarthikeyan Ramasubramanian
cbfs_unmap does not unmap the mapped region from the boot device. This leads to some resource leaks eg. TLB slots in PSP. Explicitly call rdev_munmap on the address mapped by cbfs_map. BUG=b:240664755 TEST=Build and boot to OS in Skyrim with unsigned PSP verstage. Change-Id: I51b9d066a40103f2ebdf2ef2fc3da13beb467921 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-05-27soc/amd/common/psp_verstage: Fix pending mapsKarthikeyan Ramasubramanian
cbfs_unmap does not unmap the mapped region from the boot device. This leads to some resource leaks eg. TLB slots in PSP. Explicitly call rdev_munmap on the address mapped by cbfs_map. BUG=b:240664755 TEST=Build and boot to OS in Skyrim with unsigned PSP verstage. Change-Id: If1d355972cc743b8d8c451e1b3f827abd15e98fe Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-05-27soc/amd/common/psp_verstage: Fix build for FMAP without RW slotsKarthikeyan Ramasubramanian
On FMAP without RW slots, PSP verstage fails to build because of reference to FMAP_SECTION_FW_MAIN_A_*. Instead extract the offset and size of relevant sections using fmap_locate_area(). BUG=b:240664755 TEST=Build and boot to OS in Skyrim with unsigned PSP verstage. Change-Id: I29997534c6843b47a36655431f79e5c70bd17f9b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-05-22soc/amd/mendocino: Unmap hash table after usageKarthikeyan Ramasubramanian
Earlier the entire SPI ROM is mapped at the start of verstage and then unmapped at the end of verstage. With CB:74606, this behavior has changed. So unmap the hash table CBFS file after usage. BUG=b:240664755 TEST=Build and boot to OS in Skyrim. Perform cold, warm reboots and suspend/resume cycles for 50 iterations each. Ensured that there is no impact to boot time. Change-Id: I5c605f8ba8bbd571b589b3cdf91e9cc71d711c1c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75092 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-22soc/amd/common/psp_verstage: Map/unmap boot device on need basisKarthikeyan Ramasubramanian
Currently the SPI ROM is mapped completely when the boot device is initialized. That mapping remains active throughout the execution time of PSP verstage. Every 1 MiB of mapped SPI ROM region consumes 1 TLB Slot in PSP for use during memory mapped or DMA access. With 16 MiB of mapped SPI ROM + FCH devices + 4 reserved TLB slots, 31 out of 32 total TLB slots is consumed. This leaves almost no scope for future expansion. With upcoming programs possibly using 32 MiB SPI ROM, PSP will run out of TLB slots to support 32 MiB. Hence instead of mapping the entire SPI ROM upfront, get the SPI ROM SMN address during the boot device initialization. Update the boot device region operations to map and unmap the SPI flash with the desired offset and size using the SVC call. Then anytime a memory mapped SPI ROM access is performed: map the required area, read the data and immediately unmap the area. There is no update required when using CCP DMA, since the concerned SVC call performs mapping and unmapping of the required SPI flash area implicitly. With these changes, maximum of 8 slots(size of RO section) might get used at any point in time during the PSP verstage execution. BUG=b:240664755 TEST=Build and boot to OS in Skyrim. Perform cold, warm reboots and suspend/resume cycles for 50 iterations each. Ensured that there is no impact to boot time. Change-Id: Icd44ea7b2a366e9269debcab4186d1fc71651db2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74606 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-22soc/amd/common/psp_verstage: Always build unsigned PSP verstageKarthikeyan Ramasubramanian
Currently unsigned PSP verstage binary is copied from ELF file only when required in amdfw*.rom. If a signed PSP verstage binary is supplied while building amdfw*.rom, then it is dropped. Copy the unsigned PSP verstage binary always so that it can be used for signing directly from the CI build infrastructure instead of a locally built binary. BUG=None TEST=Build Skyrim BIOS image and ensure that the unsigned PSP verstage is part of the build artifacts. Change-Id: If797dcfd20aa2991f3517904ef862406b9b9875c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75334 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-16soc/amd/*/Kconfig: change ACPI_CPU_STRING to use hexadecimal CPU numbersFelix Held
Both the AMD AGESA reference code and the default coreboot ACPI_CPU_STRING use hexadecimal numbers in the ACPI CPU object names, so change the ACPI_CPU_STRING format string in the both the Stoneyridge Kconfig and the common non-CAR AMD SoC config Kconfig which covers all other AMD SoCs in soc/amd. All platforms where the P state and C state SSDT from binaryPI (Stoneyridge) or FSP (Picasso) was used in coreboot before it got replaced by native code, had at most 8 cores/threads, so the mismatch never became apparent. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9d6822c5df01786ee541ce90734b75ed1a761fca Reviewed-on: https://review.coreboot.org/c/coreboot/+/75250 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-14soc/amd/phoenix/Kconfig: Update default soft fuse bitsFred Reitberger
Set the default soft fuse bits to the recommended values Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I2354aefe90a08eaef95a68926806d11a9118c3de Reviewed-on: https://review.coreboot.org/c/coreboot/+/75183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-05-13acpi/Kconfig: move \_SB scope out of ACPI_CPU_STRINGFelix Held
In ACPI 1.0 the processor objects were inside the \_PR scope, but since ACPI 2.0 the \_SB scope can be used for that. Outside of coreboot some firmwares still used the \_PR scope for a while for legacy ACPI 1.0 OS compatibility, but apart from that the \_PR scope is deprecated. coreboot already uses the \_SB scope for the processor devices everywhere, so move the \_SB scope out of the ACPI_CPU_STRING to the format string inside the 3 snprintf statements that use the ACPI_CPU_STRING. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I76f18594a3a623b437a163c270547d3e9618c31a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-05-13soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide MISC deviceFelix Held
Don't set bit 2 of the return value of the _STA method in order for Windows not to show a warning about an unknown device in the device manager for this device. TEST=The unknown device with device instance path ACPI\AMD0040\3 disappeared from the device manager in Windows 10 build 19045 on a Mandolin board with a Picasso APU. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If005f06843956004c281fd70cf364171148cb9ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/68962 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-13soc/amd/*/acpi/mmio.asl,sb_fch.asl: change AAHB's _STA back to methodFelix Held
Commit 396fb3db74db ("soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide AAHB device") didn't only change the visibility of the device, but also changed the _STA method to a name. While this worked, the specification says that _STA is supposed to be a method, so change it back to being a method. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0932b2875aaf563a4dbd860bdd11a04272e3780 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75169 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-08Revert "soc/amd/cezanne/romstage: Preload fspm.bin"Raul Rangel
This reverts commit d6e0a90aa0bd574b28b6c9b4b46289bf46a208db. Reason for revert: Not ready to land, blocked by ancestor CL Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic14e17db4aed2f998878920c66cdc16362920dcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/75050 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-08soc/amd/cezanne/romstage: Preload fspm.binRaul E Rangel
FSP-M is normally memmapped and then decompressed. The SPI DMA controller can actually read faster than mmap. So by reading the contents into a buffer and then decompressing we reduce boot time. It is interesting that FSP-M takes an additional 8ms to execute. I suspect since we call it 50ms earlier it's having to wait for one of its dependencies. BUG=b:179699789 TEST=Boot guybrush and see 30ms reduction in boot time | 970 - loading FSP-M | 0.316 | 0.997 Δ( 0.68, 0.05%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.026 | 13.874 Δ( 13.85, 0.96%) | | 18 - finished LZ4 decompress (ignore for x86) | 64.361 | 0.337 Δ(-64.02, -4.43%) | | 2 - before RAM initialization | 0.534 | 0.529 Δ( -0.01, -0.00%) | | 950 - calling FspMemoryInit | 1.455 | 1.132 Δ( -0.32, -0.02%) | | 951 - returning from FspMemoryInit | 207.695 | 216.537 Δ( 8.84, 0.61%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I850b1576501753a355e7b23745e04802a0560387 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-05-08soc/amd/phoenix/include/xhci: add USB4 XHCI device pointersFelix Held
Beware that there's no XHCI2 controller and the USB4 controller device pointers were added right after the xhci_0 and xhci_1 controller device pointers. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14725d4b546ffcca42e21bbe7756babaaff8fea3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74658 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-05-08soc/amd/*/acpi/northbridge,pci0: don't hide PCI0 root device from OSFelix Held
Return 0xf from PCI0 _STA method so that bit 2 is set which indicates that the device should be shown in the user interface. This ports commit c259d7192806 ("soc/amd/stoney/acpi: Unhide PCI0 root device from OS") forward from Stoneyridge to the newer AMD SoCs. TEST=On Mandolin the PCI Express Root Complex now shows up in the device manager on Windows 10 and when switching the view to 'devices by connection', all PCI(e) devices are shown below it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4155556dc5df8f163fe06aa6719fadbb2684cc19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74949 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-05soc/amd/cmn/acpi/sleepstates.asl: Align with sb/amdAngel Pons
Adjust a few things so that the sleepstates.asl file is the same for sb/amd and soc/amd. These adjustments don't have a functional impact. Change-Id: I0cc9462b326cdc371ffdbf5759d8adc42456ce74 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74960 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-05{sb,soc}/amd/cmn/acpi/sleepstates.asl: Hook up configsAngel Pons
Commit cbc5d3f34b87db779829eabc90c32780a3865a56 ("soc/intel: Don't report _S1 state when unsupported") added the `ACPI_S1_NOT_SUPPORTED` option and commit 0eb5974def63a2fc0dce6dfdad62b0b4c6f4b865 ("acpigen: Add a runtime method to override exposed _Sx sleep states") added a mechanism to override the enabled sleep states at runtime. However, these were only hooked up to Intel sleepstates. so the options would not have any effect on AMD platforms. Apply the changes from these two commits to AMD sleepstates so that both options can be used on AMD platforms as well. Change-Id: I7d5ef2361e36659ac5c6f54b2c236d48713a07c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74959 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-04soc/amd/common/block/lpc/lpc: simplify index handling in read resourcesFelix Held
Now that we don't need to find a specific resource in the set resources function any more, there's no need to use hard-coded indices for the fixed resources. Instead use an index variable that gets incremented after each fixed resource got added. The index now starts at 0 instead of at 1, but now the only requirement is that those indices are unique. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ida5f1f001c622da2e31474b62832782f5f303a32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74849 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-05-03soc/amd/common/block/lpc/lpc: drop custom lpc_set_resourcesFelix Held
Drop the custom lpc_set_resources implementation that does some register access that has no effect and then calls pci_dev_set_resources and use pci_dev_set_resources for set_resources in amd_lpc_ops instead. The SPI controller's base address got configured early in boot in the lpc_set_spibase call and the enable bits got set early in boot in the lpc_enable_spi_rom call. TEST=The contents of the SPI_BASE_ADDRESS_REGISTER at the beginning and at the end of the call stay the same, so it's simply a no-op. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a5e3e00b2e38eeb3e9dae6d6c83d11ef925ce22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/common/block/lpc/lpc: report HPET MMIOFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I77471d464dddffc63bb2f005fef3a33c84ff5f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/common/block/lpc/lpc: use mmio_range to report FCH IOAPIC MMIOFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I813a27e392a842188dc474018f82e10309783260 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/common/block/lpc/lpc: report eSPI MMIOFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I63fb70da3e9ded6c05354f94ee69bc6dd04e58f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/common/block/lpc/lpc: increase size of SPI BAR to 4kByteFelix Held
The memory map granularity for those devices is 4kByte. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8806128bdce8988f5cd7c8fa8a342fdb01eb7f42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/common/block/lpc/lpc: report mapped SPI flash as MMIO rangeFelix Held
Since the 16MByte of memory-mapped SPI flash region right below the 4GB boundary is both a fixed region and isn't decoded on a device below the LPC device, but assumed to be decoded by the LPC device itself, it shouldn't be reported as a subtractive resource, but as an MMIO resource instead. TEST=On mandolin the 16MByte MMIO-mapped SPI flash now show up as a reserved region in the e820 memory map which wasn't the case before: 13. 00000000ff000000-00000000ffffffff: RESERVED The Linux kernel doesn't show any new or possibly related errors. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: Ib52df2b2d79a1e6213c3499984a5a1e0e25c058a Reviewed-on: https://review.coreboot.org/c/coreboot/+/74839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-03soc/amd/phoenix: Add default vBIOS ID and locationMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Iadc32f4dbf8bd48d8666a213d7b5f3ba42175a90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-01soc/amd/stoney/acpi: Unhide PCI0 root device from OSMatt DeVillier
In order for Windows to detect/load drivers for any child devices, the PCI0 root device status must be enabled and visible. TEST=build google/liara, boot Windows, verify PCI child devices visible in Device Manager. Change-Id: I3fb1ba11247f0811120a4cf8a4fd99342ae201de Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-29sb,soc/amd,intel: Drop include <cpu/x86/smm.h>Kyösti Mälkki
I forgot to remove these in commit 0fe36db154eb ("ACPI: Make FADT entries for SMI architectural"). Change-Id: Ib1bc1dad6053ddb0454d4510917fd2bcf0901f35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74811 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-29ACPI: Make FADT entries for RTC/CMOS architecturalKyösti Mälkki
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY that points to same offset. Since the century field inside RTC falls within the NVRAM space, and could interfere with OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY. There were no reference for the use of offset 0x48 for century. Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-28soc/amd/phoenix: Populate type 0x63 entry with right MRC CacheFred Reitberger
On boards with RECOVERY_MRC_CACHE FMAP section, populate type 0x63 BIOS directory entry in RO with that section. If the RECOVERY_MRC_CACHE section is not present, then fall back to RW_MRC_CACHE. BUG=b:270569389 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ic5ac87685eaa5fec717e3efa4df7af511b4ce8aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/73257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-04-28soc/amd/stoneyridge/acpi/sb_pci0_fch: report correct PCI MMIO BAR windowFelix Held
This ports back commit d75ee46d3ce6 ("soc/amd/picasso/acpi: Change PCI0 BAR window") to Stoneyridge so that the correct end of the non-fixed MMIO region gets reported in PCI0's _CRS method. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I19153947cbb1b1b684291765eb1902caac65b9ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/74809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-04-28soc/amd/stoneyridge/acpi/sb_pci0_fch: report correct number of PCI busesFelix Held
This ports commit 8c28e51a16e1 ("soc/amd/picasso: fix host bridge bus numbers") back to Stoneyridge so that the correct number of PCI buses gets reported from PCI0's _CRS method. The MCFG ACPI table already had the correct last bus number. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I40121ab0e0438281192b6a0bec8dbecdc1749379 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-04-27soc/amd/mendocino: update FSP parameters for eDP power sequence adjustmentChris Wang
Add UPD parameter for eDP power sequence adjustment. The edp_panel_t9_ms parameter is set for bloff to varybloff. BUG=b:271704149 BRANCH=Skyrim TEST=Build; Verify the UPD was pass to system integrated table. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Id651c9cc4d6f4e27f6c78ca10ca12936d66ef43b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74789 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-27soc/amd/mendocino: rename pwr_on_vary_bl_to_blon to edp_panel_t8_msChris Wang
Rename the UPD pwr_on_vary_bl_to_blon to edp_panel_t8_ms to match the eDP sequence timing in milliseconds. BUG=b:271704149 BRANCH=Skyrim Test=Build/Boot to ChromeOS Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Iecdfe47cd9142d8a1ddeee0ec988d37b2a11028e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74787 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-27ACPI: Make FADT entries for SMI architecturalKyösti Mälkki
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-27soc/amd: Drop acpi_fill_madt_irqoverride()Kyösti Mälkki
It is unused. The use of field irq is problematic as it should appear relative to IOAPIC GSI bases in the devicetree. Change-Id: I460fd5fde3a7fba5518ccfc153a266d097a95a39 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-26soc/amd/common/block/gfx: Re-add signature check for vbios cacheMatt DeVillier
Commit c7b8809f155a ("soc/amd/common/block/gfx: Use TPM-stored hash for vbios cache validation") replaced checking the vbios signature (first two bytes) with checking against a TPM-stored hash, but there exists an edge case where the empty cache can be hashed and therefore never updated with the correct vbios data. To mitigate this, re-add the signature check to ensure that an empty cache will never be hashed to TPM. BUG=b:255812886 BRANCH=skyrim TEST=build/boot skyrim w/selective GOP enabled, flash full firmware image, ensure GOP driver is run until cache updated with valid data and hashed to TPM. Change-Id: Id06a8cfaa44d346fb2eece53dcf74ee46f4a5352 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-26soc/amd/phoenix/Kconfig: Update commentFred Reitberger
Fix copy-paste comment on closing endif Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I9671a9228c304988eb3903391f74a21d80d0a8bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/74734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-26soc/amd: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26arch/x86/ioapic: Promote ioapic_get_sci_pin()Kyösti Mälkki
Platform needs to implement this to provide information about SCI IRQ pin and polarity, to be used for filling in ACPI FADT and MADT entries. Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-23include/cpu/amd/mtrr: fix typo in get_top_of_mem_above_4gbFelix Held
Add the missing 'b' to the 4gb so that get_top_of_mem_above_4gb is in line with get_top_of_mem_below_4gb. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic9170372d8b0c27d7de3bd04d822c95e2015cb10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/glinda: drop code for non-existing eMMC controllerFelix Held
Glinda doesn't have an eMMC controller and also doesn't have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC related code from Glinda. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49ead01075780ea97dae99a36632f7659fd00587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74662 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22soc/amd/phoenix: drop defines for non-existing eMMC controllerFelix Held
Phoenix doesn't have an eMMC controller, so remove the remaining eMMC- related defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I412c968479d23deb7f2e060b26b4a56ec9c764f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/mendocino: drop code for non-existing eMMC controllerFelix Held
Mendocino and Rembrandt don't have an eMMC controller and also don't have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC related code from Mendocino. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib8ec49a7084bdd62e480baee75a280fde8b13d01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/phoenix/xhci: add SCI sources for the two USB4 controllersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95916e409b3fbd4941a861054733a34100244da9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/*/include/pci_devs: fix copy-paste error in PCIE_ABC_C_DEVFNFelix Held
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the internal PCI buses. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/phoenix/include/soc/smi: add missing SCI map defines 61-63Felix Held
In the PPRs #57019 Rev 3.03 and #57396 Rev 3.04, SMITYPE_XHC3_PME, SMITYPE_XHC4_PME and SMITYPE_CUR_TEMP_STATUS_5 are defined, so add those defines. When doing the initial update for Phoenix, at least XHC3 and XHC4 PME events were missing from the PPR. Those two are the PME events of the two USB4 controllers. SMITYPE_XHC2_PME doesn't exist on this SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6fff9175b73cc9d0fd324d4a568a5761b92d078 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-21soc/amd/phoenix: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=b:277997811 TEST=Build Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I7b7577baa2dbb0ea7ebbcdb1a8ae81770e61d76f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74527 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/amd/mendocino: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=None TEST=Don't see the "PCI: Leftover static devices:" warning for these in the boot console. BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I517776e4dedc70e957a0c836ab3c2e5d49e156d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74526 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21soc/amd/common/cpu/noncar/early_cache: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icc9e5ad8954c6203fc4762aa976bba7e8ea16159 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-04-21soc/amd/stoneyridge/memmap: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic673deb725a541c7535ae769f589cd82ea42a561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/stoneyridge/northbridge: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I04f2a3744aee9beedaa97b154a652ce6f0c705c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/common/block/acpi/tables: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I35895340f6e747e2f5e1669d40f40b201d8c1845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21Drop unused include <version.h>Kyösti Mälkki
Change-Id: I7d0718b5d2e0dd16eb90f63dd9d33329a2d808ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21include/cpu/amd/mtrr: rename functions to get top of memory regionsFelix Held
Rename amd_topmem and amd_topmem2 to get_top_of_mem_below_4gb and get_top_of_mem_above_4g to make it clearer what those functions return. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6e98d94c731af74aea0ce276a9a7e4867e3986f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/phoenix: Update XHCI eventsJon Murphy
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI to allow for XHCI events to be logged. BUG=b:277273428 TEST=builds Change-Id: I3ca4f84fb0f1fef8441ab6ef7b6f6348c52b2922 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74280 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21ACPI: Obsolete FADT p_lvl2_lat and p_lvl3_lat fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _CST package to define P_LVLx IO addresses for C2/C3 transitions. The latency values from _CST will always replace those in FADT. Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21soc/amd/phoenix/xhci: Correct counting of xhci_sci_sourcesFred Reitberger
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Iabba97e003d1a5140c98e3fc5a3496f66f8795c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74528 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-20soc/amd/phoenix/include/soc/pci_devs: update defines to match the PPRFelix Held
Parts of this file were still a copy of the file from the Mendocino SoC, so update the file to match the PPR #57019 Rev 3.03 and the chipset devicetree of the Phoenix SoC. Phoenix has 4 GFX/GPP PCIe bridges/ports, the numbering scheme of the GPP PCIe bridges/ports was changed so that the numbers match the device and function numbers, and there are new device functions for the IPU and the USB4 controller and router devices. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie9429c03839bb0199a04cd6cafe9a955ebdacc91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74565 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/phoenix/devicetree: drop i2s_ac97 deviceFelix Held
In both PPR #57019 Rev 3.03 and PPR #57396 Rev 3.04, the i2s_ac97 function on bus C isn't mentioned any more and the microarchitecture specification document for this SoC also doesn't mention it, so remove it from the devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibd115953bdd60e1dfcc79797b0c2158e5d861636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74564 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/stoneyridge/northbridge: fix indentation in set_mmio_addr_regFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5e067f6fb2bab66d9b2f6965636845dfd8b7cacd Reviewed-on: https://review.coreboot.org/c/coreboot/+/74567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 14:49:10 +0000