summaryrefslogtreecommitdiff
path: root/src/soc/amd/cezanne
AgeCommit message (Collapse)Author
2021-06-30src: Move `select ARCH_X86` to platformsAngel Pons
To generalise the choice of 32-bit or 64-bit coreboot on x86 hardware, have platforms select `ARCH_X86` directly instead of through per-stage Kconfig options, effectively reversing the dependency order. Change-Id: If15436817ba664398055e9efc6c7c656de3bf3e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-28soc/amd/cezanne: Add call to mb to configure eSPI requirementsMartin Roth
When initializing espi early, there may be mainboard requirements to configure the bus properly. This allows the mainboard to do that. BUG=192100564 TEST=Build along with next patch, eSPI works on guybrush Change-Id: Icc02877a09b8f8ed20fd1b04f3cee0509f1a85c5 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-23soc/amd/cezanne: Init eSPI early if requiredMartin Roth
If the NO_EARLY_BOOTBLOCK_POSTCODES config option is enabled, configure eSPI as early as possible in the x86 boot sequence. We found that there are situations that can cause the system to hang if there are any port80h postcodes sent out before eSPI is initialized. BUG=b:191370340 TEST=Build & Boot with and without NO_EARLY_BOOTBLOCK_POSTCODES enabled. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I0badb1c529e96ee4f81134287db53ce32473de6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55732 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21soc/amd/cezanne/fsp_m_params: set HD Audio enable UPD from devicetreeFelix Held
Pass the info if the non-graphics HD audio controller device is enabled or disabled in the board's devicetree via a UPD to the FSP so that it knows if it should enable or disable the corresponding device. TEST=When adding "device ref hda on end" to the devicetree of amd/majolica the non-graphics HD Audio controller shows up in lspci and when that line isn't added the PCIe device doesn't show up. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9f5e164d308906bfc788e5c2674c13c7b2ebf471 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-21soc/amd/cezanne/fsp_m_params: set SATA enable UPD from devicetree infoFelix Held
Currently the FSP only has one switch to disable both AHCI controllers. If at least one of the two AHCI controller devices is enabled in the board's devicetree, set the SATA enable UPD to 1 and otherwise set it to 0. Setting the UPD value to 0 when both AHCI controllers are disabled saves around 60ms in boot time. BUG=b:191385289 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I84e7c8bf2ab08c8254271ddfefd2e4e7d8c2e87b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55669 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/amd/picasso,stoneyridge/acpi: use defines for MADT parametersFelix Held
Using existing defines instead of magic values improves readability of the code. Also add comments to the MADT IRQ overrides to make it clearer what those actually do. TEST=Timeless build results in identical binary for amd/gardenia (Stoneyridge), amd/mandolin (Picasso) and amd/majolica (Cezanne) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I224ffbe8eb65bcdd5fc70c0ff8b15d55b3f6be01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55613 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-16soc/amd/cezanne/include/soc/iomap: add eMMC MMIO base addressesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie97bd6ad076f0ce35fc997d954a003a1252184e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne,picasso/include/soc/iomap: reflow I2C_DEVICE_COUNTFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7edae2142120dec9e11ef823b561401b7e0bc208 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne/acpi/mmio: use AOAC offset definesFelix Held
Even though the code is currently commented out, replace the magic numbers with the existing defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0dbbadf71f2e5a4d23ee998e2aa0a8b67205845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-06-16soc/amd/cezanne: factor out AOAC offset definesFelix Held
Factoring out those defines allows using them easily in the ACPI code without having to use preprocessor macros. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib9dfddb0d4f32a542fa652ff8c14e932c224f247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-16soc/amd/cezanne,picasso: add AOAC offset define for the eMMC controllerFelix Held
BUG=b:184978118 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I03554a151aa6a6d9e15d74c63cd02239b788808a Reviewed-on: https://review.coreboot.org/c/coreboot/+/55530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-14soc/amd/{cezanne,picasso}: Add TS_START_ROMSTAGERaul E Rangel
BUG=b:179092979 TEST=boot guybrush and see romstage tag 14:finished loading romstage 2,683,151 (10,079) 1:start of romstage 2,683,159 (8) 970:<unknown> 2,683,386 (227) 15:starting LZMA decompress (ignore for x86) 2,683,391 (5) 16:finished LZMA decompress (ignore for x86) 2,717,867 (34,476) Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib8b3fe909140e05a89b74df526bf4f81799ad915 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55398 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-13soc/amd/cezanne: Supply SMBIOS/DMI Type 17 dataNikolai Vyssotski
Enable generation of DMI Type 17 data on Cezanne. BUG=b:184124605 TEST="dmidecode --type 17" in OS on Majolica Change-Id: Iaa89ee1ce6efa0280f17a443e07571a1190873a6 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-13soc/amd/cezanne: call boot_with_psp_timestampKangheui Won
if VBOOT_STARTS_BEFORE_BOOTBLOCK is set, call boot_with_psp_timestamp to migrate PSP timestamps into x86 timestamp table. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4d51802145263145d40908889de29147af54f50f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-06-11soc/amd/cezanne: remove warm reset flag codeFelix Held
The warm reset bit in the NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if something was written to the register, the NCP_WARM_BOOT bit never got set and the NCP_ERR register in I/O-space always reads back as 0x7f. [1] checked with PPR for AMD Family 19h Model 51h A1 (CZN) #56569 Rev 3.01 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I569372db9f36ec7bbc741f4d7312ade312daa70b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55101 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11cpu/x86/lapic: Replace LOCAL_APIC_ADDR referencesKyösti Mälkki
Note that there are assumptions about LAPIC MMIO location in both AMD and Intel sources in coreboot proper. Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07cpu/x86: Default to PARALLEL_MP selectedKyösti Mälkki
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-07soc/amd/cezanne: Configure I2C Pad RX Select through devicetreeKarthikeyan Ramasubramanian
Some of the I2C buses are required to operate at different voltage level compared to other I2C buses eg. I2C bus to Google Security Chip (GSC) should be at 1.8V level. By default, all the I2C buses are initialized to operate at 3.3 V. Add support to configure I2C pad RX select through devicetree and update the concerned devicetree. BUG=b:188538373 TEST=Build and boot to OS in Guybrush. Ensure that the communication with GSC is fine. Build Majolica mainboard. Change-Id: I595a64736fdac0274abffb68c5e521302275b845 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-06-07cezanne/psp_verstage: add reset/timer svcKangheui Won
The new cezanne PSP release added support for these svcs. So add those functionality back to cezanne psp_verstage. BUG=b:187906425 Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Id542f5ed0762f582ea966466d67ed938ecb9c1f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/cezanne/include/iomap: properly align definesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I14647b3d88146602b96fc1dff2347a293bab0c26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-31soc/amd/cezanne: Add pre-FSPM call to the mainboardMartin Roth
The Guybrush platform needs to set up some GPIOs immediately before the FSP-M runs. Add a platform specific call. This will be used in a follow-on commit. BUG=b:184796302, b:184598323 TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I37d2625ff426347852e98a9a50f15368e0213449 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54638 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27soc/amd/cezanne: add devicetree setting for PSPP policyFelix Held
This allows boards to specify which PSPP policy (basically a dynamic trade-off between power consumption and PCIe link speed) should be used and also makes sure that the boards are using the expected PSPP policy and not just the UPD default from the FSP binary that has already changed once during the development. BUG=b:188793754 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1b6459b2984711e72b79f5d4d90e04cb4b78d512 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54930 Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/amd/cezanne: add support for the changed AMD FSP API for USB PHYJulian Schroeder
The AMD FSP is using a new structure for USB and USB C phy settings. This patch removes old, unused structures, adds the new one and enables the devicetree interface for it. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I011ca40a334e4fd26778ca7f18b653298b14019b Reviewed-on: https://review.coreboot.org/c/coreboot/+/54065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-22soc/amd: reduce MCACHE size with psp_verstageKangheui Won
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but we have limited space on the PSP thus cannot afford it. BUG=b:177091575 BRANCH=none Signed-off-by: Kangheui Won <khwon@chrmoium.org> Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-22soc/amd/cezanne,picasso/reset: use byte I/O read for NCP_ERRFelix Held
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The variable the result gets assigned to is also a uint8_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-21soc/amd/cezanne,common,picasso: use BERT region reserved by FSP driverFelix Held
commit ce0e2a014009390c4527e064efb59260ef4d3a3b (drivers/intel/fsp2_0: use FSP to allocate APEI BERT memory region) adds a mechanism to reserve the BERT region inside the coreboot code, so we can get rid of the workaround to reserve it in the FSP and return the location in a HOB. mcfg->bert_size defaults to 0 which makes the FSP not generate the corresponding HOB, but that field is planned to be removed at least on Cezanne, so don't explicitly set it to 0. BUG=b:169934025 TEST=BERT table that gets generated in a follow-up patch for Picasso points to expected BERT region and Linux is able to access, decode and display it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaca89b47793bf9982181560f026459a18e7db134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19soc/amd/cezanne/fch: add PCIe GPP clock generator configuration settingsFelix Held
I'm not 100% sure if this should rather be duplicated from Picasso or commonized. Checked with the docs and this won't be compatible with Stoneyridge and one future product's PPR lacked the corresponding register. Some other chip has a compatible register layout, but a different number of PCIe GPP clock outputs, so the common code would need to use some SoC-dependent defines and possibly a SoC-specific lookup table for the mapping which is also not that great. TEST=Checked Cezanne PPR Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b6d0cb8d7eb0288d8a18fcb975dc377b2c6846a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54685 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-16soc/amd/*/Makefile.inc: Strip the quotesZheng Bao
PSP_SOFTFUSE_BITS used to be like this: 15 0 29 "28 6" It causes internal shell report error: /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-14soc/amd/cezanne: Enable GFX HDA FSP UPDKarthikeyan Ramasubramanian
By default, FSP disables the GFX HDA. Enable it to support HDMI Audio functionality. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Ensure that the GFX HDA is enumerated in lspci output. 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637 Change-Id: I42cb26c44bbca3d937c5d52736c42468139f7b07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54100 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/amd: factor out acpigen_write_alib_dptc to common codeFelix Held
Also drop unneeded intermediate cast to void * before casting the address of the struct dptc_input type variables to uint8_t *. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13soc/amd/cezanne/root_complex: generate DPTC ACPI methodFelix Held
This adds support for convertible devices to support different maximum power and thermal configurations. The dynamic power and thermal configuration (DPTC) via ACPI ALIB calls allows to change the parameters during runtime. This code contains the assumption that \_SB.PCI0.LPCB.EC0.TBMD exists when ACPI code calls the DPTC method. At the moment only chromeec declares EC0.TBMD, but it's also the only code that calls the DPTC method. The definition of DPTC_INPUTS isn't moved to the common code directory, since it's currently unsure if we might need to configure more than those 4 parameters for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibdfc056cb325a32d87505dd93e01c9af81dfd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-12soc/amd/cezanne/chip.h: add DPTC and tablet mode optionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I39218b79a79f1ccaf1a58408c6bb5161acea64aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54073 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12soc/amd{common,cezanne}: Move pcie_gpp.c to commonRaul E Rangel
Cezanne and Picasso can now use the same driver. BUG=b:184766519 TEST=Boot guybrush and dump ASL. Verified it didn't change. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie4ede82935d6c69b323c1fdceaa61e306aa2820a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-10soc/amd/cezanne: Force resets to be coldMarshall Dawson
Cezanne must use cold resets. Change the warm reset request to always set TOGGLE_ALL_PWR_GOOD. And, since the bit is sticky across power cycles, set it early for good measure. BUG=b:184281092 TEST=Majolica successfully resets using 0xcf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I7d4ca5665335b20100a5c802d12d79c0d0597ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10cezanne/psp_verstage: update SRAM addressKangheui Won
Loading address and size for the user app has been changed with recent PSP release. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: If247cdf3413c6a10f4b3c92fb7e43dd1057865d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10amd/cezanne: verify transfer buffer in bootblockKangheui Won
Verify if transfer buffer is valid before progressing further to catch invalid transfer buffer early. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4c470b156944b50e581dcdee47b196f46b0993f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52965 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: differentiate bios entryKangheui Won
AMDFW tool stores bios dir entry to bios1_entry in picasso but bios3_entry in cezanne. Separate getting bios_dir_addr into a function and implement it on each platforms. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: move platform-specific code to chipset.cKangheui Won
Move all platform-specific code except direct svc calls to chipset.c. There will be differences between each platforms and we can't put everything into svc.c. TEST=build firmware for zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: clean up duplicated targetKangheui Won
psp_verstage.bin target is already defined at common/psp_verstage/Makefile.inc, thus removing it here. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ica4b09282d1c4cfc555c18ba50951458b8580826 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52962 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: populate a/b firmwareKangheui Won
Build amdfw_[ab] and put them into CBFS. We can reuse FW_[AB] position from zork since we have same flash layout and size. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Idb31afa7a513f01593b2af75515a170dfca8d360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52961 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Generate PCI GPP ACPI namesRaul E Rangel
We can generate the names, so there is no need to hard code a table. This will make the code more generic so it can be reused with picasso in the future. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5134d1dba4fcb9ce8cc4bfad1c619331a95f3b11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52870 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Enable GNB IO-APIC _PRTRaul E Rangel
We can now use the GNB IO-APIC. BUG=b:184766519 TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4df5a4583f14044d2efcde3a9de9dd85e898a11d Reviewed-on: https://review.coreboot.org/c/coreboot/+/53936 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: add GNB IOAPIC supportFelix Held
To configure and enable the IOAPIC in the graphics and northbridge (GNB) container, FSP needs to write an undocumented register, so pass the GNB IOAPIC MMIO base address to make it show up at that address. BUG=b:187083211 TEST=Boot guybrush and see IO-APIC initialized IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23 IOAPIC[1]: apic_id 17, version 33, address 0xfec01000, GSI 24-55 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1e127ce500d052783f0a6e13fb2ad16a8e408b0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52905 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Generate PCI routing tableRaul E Rangel
Use the new acpigen_write_PRT to write the _PRT for each PCI bridge. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idb559335435a95e73640e6d7fb224e16e0592326 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/cezanne: Populate PCI_INTR registersRaul E Rangel
This uses the new FSP PCI methods to pull the routing table and populate the pirq data structure. BUG=b:184766519 TEST=Boot guybrush and verify we get Got IRQ 0x1F (disabled) messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie21229cc2fb4fd5b85c0b9e933f7b43af24864b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-08soc/amd/cezanne/acpi/soc: call WAL1 for AC/DC state ALIB callFelix Held
BUG=b:187212773, b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2cf50257d767525d682602cdcc5547bf001fe2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/53921 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05soc/amd/cezanne/agesa_acpi: add add_agesa_fsp_acpi_table callFelix Held
this adds the ALIB SSDT that gets passed from the FSP to coreboot via a HOB. BUG=b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a7dae5789eee442b321ddf276494eb53fc5f499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-05soc/amd/cezanne/agesa_acpi: add and call agesa_write_acpi_tablesFelix Held
This function will be used to add some SSDTs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia88cb5ea483850a8659f3bae8040c82eb2735d26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-02soc/amd/cezanne: add verstage filesKangheui Won
Add support for psp_verstage compilation. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Iac48c92a787adabfdaec96b6e8d2e24708d7e652 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-04-30amd/cezanne: Add telemetry setting to UPDChris Wang
Add telemetry setting to UPD, the value comes from the SDLE testing. BUG=b:182754399 TEST=Build & Boot guybrush Cq-Depend: chrome-internal:3787638 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I9dd3643e9c582a41192130901935eef321b2c67e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52733 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-29soc/amd/cezanne: Enable Audio Co-processor driverKarthikeyan Ramasubramanian
BUG=b:182960979 TEST=Build and boot to OS in Guybrush. Change-Id: I73d1d3e5c1c4eb30ebf44f38d381beba84075351 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-28soc/amd/cezanne: copy psp_transfer.h from picassoKangheui Won
Cezanne version of psp_transfer.h lacks some necessary definitions. Currently we don't have any plan to change transfer buffer structure in cezanne, so just copy'em over. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I9361c4ab76c8ded06358a7718d5e447c16414721 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52540 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-28soc/amd/cezanne: copy Kconfig options for psp_verstageKangheui Won
These are just copied from picasso one. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I701d6af63b24e86f8e132fad73504e20148a2bf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-26soc/amd/cezanne: Update STAPM vars with unitsMartin Roth
Like the Picasso platform, it's very useful to have units on these variables. BUG=b:185209734 TEST=Build & Boot Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I592c807c5e9a2c17b1c5959e56a01237352c5204 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-26amd/cezanne: Add slow_ppt_time & thermctl_limit to UPDMartin Roth
These values will be added in the upcoming STAPM configuration update. BUG=b:185209734 TEST=Build & Boot guybrush Cq-Depend: chrome-internal:3780259 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I2a6835c16badfe505e3c33b356ca671766cd6972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: chris wang <Chris.Wang@amd.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-26soc/amd/cezanne/fsp_m_params: Configure the s0i3_enable UPDKarthikeyan Ramasubramanian
Configure the S0i3 enable UPD based on the mainboard configuration. BUG=b:178728116 TEST=Build and boot to OS in Guybrush. Enter S0i3 after passing the sleep state configuration from the mainboard. Change-Id: I18f43e964d1c70317155394257a5e2c1900816bb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-26soc/amd/cezanne,picasso/Kconfig: add help text for MAX_CPUSFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Change-Id: I76270b43b3202bda71ff3f6b97d5ffa2234511b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52646 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26soc/amd/cezanne & picasso: Add Kconfig for hardcoded Soft Fuse bitsMartin Roth
Currently, some of the PSP Soft Fuse bits are hardcoded in the Cezanne and Picasso makefiles. This makes it impossible for platforms to change them. This change puts the hardcoded bits in Kconfig, allowing them to be modified by the platform. BUG=b:185514903 TEST=Verify that the correct Soft Fuse bits are set. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I190ebf47cb7ae46983733dc6541776bf19a2382f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52422 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23soc/amd/cezanne/cpu: make sure that MAX_CPUS isn't overriddenFelix Held
Trying to limit the number of available cores by setting the MAX_CPUS Kconfig option to a lower value than the SoC's default might result in cores being enabled in the FSP-S, but not fully initialized in coreboot which will cause some malfunction. Add a static assert to make sure that this option isn't changed from the default. To limit the maximum number of cores, use the downcore_mode and disable_smt devicetree settings instead. BUG=b:184162768 TEST=Build fails if MAX_CPUS isn't the expected default. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idd6aa1d99128b17218a8e910c33415218a58578f Reviewed-on: https://review.coreboot.org/c/coreboot/+/52606 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23soc/amd/cezanne: fix i2c compiler errors on non-x86Kangheui Won
if ENV_X86 is not true we had several compile errors in i2c code. Fix them before we add code for psp_verstage which is non-x86. BUG=b:182477057 BRANCH=none TEST=build Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I0796671dd34ab2d0f123c904a88c57cdad116a57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-22guybrush: Add Kconfig for PSP eSPI and port80Rob Barnes
Add PSP_DISABLE_POSTCODES and PSP_POSTCODES_ON_ESPI kconfig options for cezanne. Select PSP_DISABLE_DISABLE_POSTCODES and unselect PSP_POSTCODES_ON_ESPI for guybrush. Port80 codes from PSP can cause bus errors on guybrush. BUG=b:185514903, b:184356693 TEST=Boot guybrush, observe no port80 codes from PSP Change-Id: I7241e47ec1b89782e699135370c796eb251afcaa Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52401 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21soc/amd/{cezanne,common}/acpi: Add _OSC methodRaul E Rangel
The linux kernel requires a valid _OSC method. Otherwise the _LPI table is ignored. See https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.10/drivers/acpi/bus.c;l=324 Before this patch: acpi_processor_get_lpi_info: LPI is not supported After this patch: acpi_processor_evaluate_lpi: ACPI: \_SB_.CP00: ACPI: Found 4 power states BUG=b:178728116 TEST=Boot OS and verify _LPI table is parsed Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I44e554b9db6f70fdd1559105cdaee53aeb2bfbf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-21soc/amd/cezanne: add SMU settings to devicetreeFelix Held
BUG=b:182297189 TEST=none Cq-Depend: chrome-internal:3772425 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifbcc85cc10d59f1418bbf0ed4a0dc7549d589a26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-21soc/amd/cezanne: add downcoring and SMT disable settings to devicetreeFelix Held
BUG=b:184162768 TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id03454ed2be242bce9497560c089f75046ed7e32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52197 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21soc/amd/cezanne/chip.h: include missing types.hFelix Held
Since we use uintX_t, bool and friends, we need to make sure to include the corresponding definitions. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icb8a6e93d7f1923ac95e584fb3e33c391963f5ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/52551 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21soc/amd/cezanne: Add support for C-state 3Raul E Rangel
These values match the majolica UEFI firmware. BUG=b:185787242, b:178728116, b:185921043 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If107c7e836942eeba734c1634fa7f8555c3018b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-20soc/amd/{common,cezanne}: Add uPEP deviceRaul E Rangel
The uPEP device is required to support S0i3. The device has been written in ASL to make it easier to read and maintain. The device constraints are purely informational. We use a dummy constraint like the Intel platforms to keep both linux and Windows functional. In order for this device to be used by the linux kernel the ACPI_FADT_LOW_PWR_IDLE_S0 flag must be set. So including it unconditionally doesn't cause any problems. The AMD Modern Standby BIOS Implementation Guide defines two UUIDs, one for getting the device constraints, and one for handling notifications. This differs from the Intel specification and the linux driver implementation. For this reason I haven't implemented any of the notification callbacks yet. BUG=b:178728116 TEST=Boot OS and verify _DSM is called: [ 0.226701] lps0_device_attach: ACPI: \_SB_.PEP_: _DSM function mask: 0x3 [ 0.226722] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: _DSM function 1 eval successful [ 0.226723] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list begin: [ 0.226724] lpi_device_get_constraints_amd: ACPI: \_SB_.PEP_: LPI: constraints list end Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2deef47eabe702efe1a0f3747c9f27bcec37464b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52445 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19Revert "soc/amd/cezanne: Add support to perform early EC sync"Karthikeyan Ramasubramanian
This reverts commit ad7c33abd21dfdde75c6ffa23c31cbe46826d2d5. With EFS2 already enabled in EC, enabling early EC sync is not required. Also a workaround has been added in payload to address any boot issues. BUG=b:185277224 TEST=Build and boot to OS in Guybrush in both normal and recovery mode. Cq-Depend: chromium:2832032 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I34f8433739754365c8e5a10fdf7e58e3d1e7e797 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52419 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-18soc/amd/cezanne/Kconfig: add missing ACPI_BERT and ACPI_BERT_SIZEFelix Held
ACPI_BERT_SIZE is used in the FSP driver and the fsp_m_params.c. The latter one is planned to be deprecated though. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id1a250defbd31e255df9b7a7dd8488dc3182649b Reviewed-on: https://review.coreboot.org/c/coreboot/+/52385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16soc/amd/cezanne: Update FADT to support S0i3Jason Glenesk
Set ACPI_FADT_LOW_PWR_IDLE_S0 flag in FADT. BUG=b:178728116 TEST=Dump FACP and confirm Flags bits match expected. Change-Id: I59ef762a18903135f9daa902ba8d1e40c451e96c Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52035 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-16soc/amd/cezanne: Add modern standby option to chip configMathew King
BUG=b:178728116 Change-Id: I0d09bd4361f5f47360daf750efbc993010804902 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-16soc/amd/cezanne: Port ACPI p-state and c-state entries from picassoJason Glenesk
Add generate_cpu_entries to device operations. Add support to generate cpu p-state and c-state SSDT entries. BUG=b:184151560 TEST=Dump and verify SSDT entry for CPU p-states and c-states. Change-Id: I77d8078b94fb661dc045b4184955c8cbec373d12 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-16soc/amd/cezanne: Add uart controllers to chipset.cbIvy Jian
Add uart controller to chipset.cb and leave it off by default. Turn uart0 on for console for mainboards. BUG=none TEST=builds and boot into OS Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Iaeb7fea4b92bd89331c7ae7c1c000f8d9961fe9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-04-16soc/amd/cezanne: Select VBNV_CMOSRaul E Rangel
Needed so we can switch to normal mode. BUG=b:184126844 TEST=Boot guybrush in developer mode and switch to normal mode. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I26ad160a2372484e9753a727f2b454a31e3537a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-14soc/amd/cezanne/fch: process ACPI PM/GPE and GPIO eventsFelix Held
BUG=b:184549804 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ebbe9667d18a96b1a363d0353c612e214699d12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52273 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-14soc/amd/cezanne: save chipset state to CBMEMMartin Roth
Guybrush complains that this is missing during the boot, so add it to cezanne. I verified that the registers in gpio.c are correct. BUG=b:184549804 TEST=Build and boot Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3de3764c99fe89b962db88065575463b365ddaf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-10soc/amd/cezanne: Set Power state after power failureKarthikeyan Ramasubramanian
Configure the power state to return to when the power is re-applied after power failure. BUG=b:183739671 TEST=Build and Boot to OS in Majolica and Guybrush. By default when the power fails the device turns on after power is re-applied. When the POWER_ON_AFTER_POWER_FAILURE is disabled, the device remains off even after the power is re-applied. Change-Id: I21c5da08c82156d6239450ef6921771da74cbaa1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52049 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-10soc/amd/cezanne: Add GRXS and GTXS methodEric Lai
Add GRXS and GTXS support. Move the gpio method into common place. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8ba377179d6976cf26ed0dc521d8e4eff051dc85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-04-08soc/amd: remove special GPIO_2 override soc_gpio_hookKyösti Mälkki
This override was added to have the SCI mapping configured if GPIO was used as WAKE_L pin. This however didn't set up the SCI level and trigger information, so it likely never worked as intended. Change-Id: I44661f05c8f517ece88714c625603579731d174b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-07soc/amd/cezanne: Pass DXIO and DDI Descriptors to FSPMatt Papageorge
This patch adds the functionality to write the DXIO and DDI descriptors to the UPD data structure to the SoC code and adds the mainboard_get_dxio_ddi_descriptors function to each mainboard using the Cezanne SoC that gets called to get the descriptors from the board code. Change-Id: I1cb36addcf0202cd56ce99e610a13d6d230bc981 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-07vc/amd/fsp/cezanne: update UPD headersMatt Papageorge
The UPD header files get generated as part of the FSP build process. For the initial Cezanne development we took the Picasso UPD data structures as a starting point. This patch replaces it with the first version of the Cezanne-specific UPD data structures that is present in version 12 of the internal work-in-progress FSP binary drops. The serial_port_stride UPD-M field is removed, since the information is already given by serial_port_use_mmio. The stride is 4 bytes for the MMIO UART case and 1 byte for the legacy I/O case. BUG=b:182524631 TEST=NVMe works on google/guybrush when the rest of the patch train is applied as well. Change-Id: Idca235029bf2e68d403230d55308820cab61a6c0 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-05soc/amd/cezanne: Add soc/msr.hRaul E Rangel
This is a copy of picasso. BUG=b:184151560 TEST=Compared with the cezanne PPR. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia4bc40daa971c126c2596837155312d411b91a06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-04-05soc/amd: Make espi_clear_decodes privateRaul E Rangel
espi_setup already clears most of the controller registers. So this change consolidates the clear logic into one spot. This shouldn't result in a behavior change on Picasso. Picasso already has the eSPI decodes clear on boot, so this change is a nop. BUG=b:183524609 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic57689e50febd29796d8ac8d99c81e41fee5b41c Reviewed-on: https://review.coreboot.org/c/coreboot/+/52064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-05soc/amd: Make espi_configure_decodes privateRaul E Rangel
This is only ever called after espi_setup. 55861 - AMD System Peripheral Bus Overview also says that io ranges should be configured before enabling the BUS_MASTER bit. BUG=b:183524609 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I074e487d8768a578ee889a125b9948e3aa6c7269 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-05soc/amd/cezanne: Clear eSPI ranges before configuring eSPIMartin Roth
The Cezanne PSP configures the eSPI with the assumption that it's a majolica, setting up both the serial port and the majolica EC IO decode ranges. Since guybrush is NOT a majolica, this doesn't work very well there. Clearing the decode ranges allows the guybrush platform to set the decode ranges needed for its EC. BUG=b:183524609 TEST=Set up eSPI on Guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I77cfb948cb9ae6d1cf001bd9e66cede8d93f50b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-02soc/amd/cezanne: Add support to perform early EC syncKarthikeyan Ramasubramanian
Ideally we would like to perform EC Software Sync in payload. But with the hardware requirement (EC_IN_RW) and firmware requirement (TPM command to get EC execution environment) not met yet, adding the support to perform early EC Software sync. With EFS2 enabled, this will also help cr50 to set the boot mode as NORMAL instead of NO_BOOT. BUG=None TEST=Build and Boot to OS in Guybrush. Ensure that the EC software sync is successfully complete. CBFS: Found 'ecrw.hash' @0x50400 size 0x20 in mcache @0x020171ec VB2:check_ec_hash() Hexp RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 VB2:check_ec_hash() Hmir: 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 <snip> VB2:check_ec_hash() Heff RW(active): 2dd8dbb78d0c626358a626037973a3d81982f88f3f38e7f759039bf84e05ccc6 VB2:sync_ec() select_rw=RW(active) Change-Id: I820e651c6b22a833fef6f17a4ceb5a8cfb6f1616 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-01soc/amd/cezanne: Enable GENERIC_GPIO_LIBRaul E Rangel
Needed so we write the correct resource into the ACPI tables. BUG=b:183737011 TEST=Boot OS and see GPIO devices working Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2ba4349e0ed500912db40aa6ef9b649046f4358f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51961 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01soc/amd/cezanne: Add device tree support for I2CRaul E Rangel
This allows the cr50 on guybrush to show up in ACPI. BUG=b:183737011 TEST=Boot OS and see I2C devices initialized Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifb5679b7bbefbf753217981874bb1bdaef35f6db Reviewed-on: https://review.coreboot.org/c/coreboot/+/51958 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-30soc/amd/cezanne: Comment the AOAC register accessKarthikeyan Ramasubramanian
Causing the AOAC register access as part of system suspend (S3) causes the suspend procedure to be stuck. Comment it for now to unblock entering S3 and collecting the power numbers. BUG=b:181766974 TEST=Build and boot to OS in Majolica. Enter S3 through "echo mem > /sys/power/state". Change-Id: Ie93bbe393b209b784b9a2257f3916b29d84b25d1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51926 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd/cezanne: factor out UPD-M configuration from romstageFelix Held
Move the parts of romstage.c that populate the UPD-M data structure to the newly created fsp_m_params.c file. Since platform_fsp_memory_init_params_cb gets called from the FSP driver and not directly from car_stage_entry the two code parts in romstage.c weren't directly interacting. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1f7f5879ac318372042ff703ebbe584ce1c32c91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd/cezanne,picasso: rename fsp_params.c to fsp_s_params.cFelix Held
This file populates the UPD-S data structure that gets passed to the FSP-S, so add that s part to make it a bit clearer which FSP parameters it'll set up. This is also a preparation to add a fsp_m_params.c file in the following patches. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53786df0909055e66eac675b5580909b7960944f Reviewed-on: https://review.coreboot.org/c/coreboot/+/51833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-29soc/amd: add DISABLE_KEYBOARD_RESET_PIN optionFelix Held
The KBRST_L pin will cause a reset when driven or pulled low even when the GPIO mux is set to GPIO and not native function. So when you want to use that pin as general purpose output the keyboard reset input functionality needs to be disabled by selecting this option in the board's Kconfig file to avoid causing a reset by writing a 0 to the output level bit when it's configured as an output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Furquan Shaikh <furquan@google.com> Change-Id: I517ad551db9321f26afdba15d97ddb61be1f7d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51757 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-29soc/amd/cezanne: Implement PROVIDES_ROM_SHARINGRaul E Rangel
BUG=none TEST=Build guybrush and verified with the PPR that the register and bits are still the same Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0619f84cf82cbb90ded9dfd58afa6acc9520fb8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd: move PM_RST_CTRL1 register definition to common acpimmio headerFelix Held
TEST=Verified that this register and the defined bits exist in Cezanne, Picasso, Stoneyridge, Bolton and SB800. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I32d1d577b05edab006981516a5aefd822e7b984a Reviewed-on: https://review.coreboot.org/c/coreboot/+/51783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-29soc/amd/*/gpio: include types.h instead of stdint.h to have size_tFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a747d4c28e6d449c054ce83966767e13b51a939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-24mb/google/guybrush: disable KBRSTENKangheui Won
GPIO129 is muxed with KBRST, so setting GPIO129 to low causes reset when KBRSTEN is set to 1. Since reset value of KBRSTEN is 1 we need a logic to clear it. BUG=b:183340503 TEST=build Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I194e8432a14d6105f6bcf12111647f5aad4e2de2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-23soc/amd/cezanne: select HAVE_EM100_SUPPORTFelix Held
This makes the EM100 option visible in Kconfig that makes sure that the SPI settings that coreboot applies are valid for the EM100 that has some limitations on the maximum SPI frequency and possibly on the supported SPI modes. For the PSP SPI settings, the mainboard still might need to provide EM100-specific settings for EFS_SPI_READ_MODE, EFS_SPI_SPEED and EFS_SPI_MICRON_FLAG. Haven't checked if those PSP settings are correctly integrated for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5dec9ce69628ca3623b5009d47f4b3dc020a3dad Reviewed-on: https://review.coreboot.org/c/coreboot/+/51711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-03-22soc/amd/cezanne: Initialize I2CZheng Bao
Add I2C initialization in romstage and ramstage. TEST=To test the I2C connection on Majolica, which doesn't have SPD connection, call the function below after i2c_soc_init is called. i2c_read_bytes(2, 0x4d, addr, data, 1);/* Read out 1 byte one time */ It can get the register values of TMP432B. Or /* Override EC port in ec.h */ #define EC_DATA 0x662 #define EC_SC 0x666 ec_write(0xA9, 0x40); i2c_read_bytes(1, 0x10, addr, data, 2);/* Read out 2 bytes one time */ It can get the register values of CM32181A3OP(ALS). Change-Id: I3a2a1494b44b68e8d8204fba0c90e769e0256e6f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51029 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-22soc/amd/cezanne: Get I2C specific code for cezanneZheng Bao
Add macros, settings and callbacks to support I2C for cezanne. Change-Id: Ic480681d4b7c6fb8591e729090e4faeb5fccf800 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-03-18soc/amd/cezanne/pci_gpp: Add ACPI names for GPP bridgesRaul E Rangel
We are currently writing invalid ACPI tables. We are missing the GPP ACPI names. There is an assert in acpi_device_write_pci_dev that checks to see if we have a scope, but by default asserts don't halt, so we were writing a NULL scope. BUG=b:171234996 TEST=Boot majolica and dump ACPI tables Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6a861ad1b9259ac3b79af76e18a9354997b0491e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 16:55:05 +0000