summaryrefslogtreecommitdiff
path: root/src/soc/amd/cezanne
AgeCommit message (Collapse)Author
2022-08-17soc/amd/common/acpi/cppc: add nominal and minimum frequenciesFelix Held
Now that we have functionality to get the minimal and nominal frequencies, the corresponding fields in the CPPC config can now be populated. If the HOB isn't present and/or the frequency values could not be obtained, CPPC_UNSUPPORTED is still used; otherwise the HOB-provided frequency in MHz is used for those two fields. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Change-Id: Id3257690a3388d44ceceb7ac4f1db3d49e195caa Reviewed-on: https://review.coreboot.org/c/coreboot/+/66551 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-17soc/amd/cezanne,picasso,sabrina/smihandler: add comment about SMN accessFelix Held
The SMI sleep entry handler will access the SMN space via the index/data register at PCI config space offsets 0xb8 and 0xbc of the device at bus 0, device 0, function 0. This register pair is also used by other software components running on the x86 cores after boot, so it should be saved and restored at the beginning/end of the SMI handler if it accesses SMN. The sleep entry SMI handler is a special case, since the OS is already done at the moment we enter the sleep SMI handler which is the last code that gets run on the x86 cores before entering S3/4/5. BUG=b:237004699 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0980562ef8a61489082a81c71d6d00d0786d68cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-15soc/amd/*: move reset_i2c_peripherals call after early GPIO setupFelix Held
Since bootblock_soc_early_init gets called before bootblock_mainboard_early_init which does the early GPIO setup, external I2C level shifters that are controlled by GPIOs might not be enabled yet. Moving the reset_i2c_peripherals call to bootblock_soc_init makes sure that the early GPIO setup is already done when reset_i2c_peripherals is called. Haven't probed any SCL signal on the non-SoC side of the I2C level shifters yet, but the waveform on the SCL pin of I2C3 on the SoC of a barla/careena Chromebook doesn't have the longer than expected SCL pulses any more. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If02140aef56ed6db7ecee24811724b5b24e54a91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-12soc/amd/cezanne,common: factor out CPPC code to common AMD SoC codeFelix Held
The Cezanne CPPC ACPI table generation code also applies to Sabrina, so move it to the common AMD SoC code directory so that it can be used for Sabrina too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5ce082a27429948f8af7f55944a1062ba03155da Reviewed-on: https://review.coreboot.org/c/coreboot/+/66400 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-04soc/amd/cezanne/cppc: drop duplicate newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I774be6d80e0aae725ecb1027501c8d66e0bf5a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-04soc/amd/cezanne/cppc: reduce visibility of cpu_init_cppc_configFelix Held
This function is only called from the same compilation unit, so turn it into a static function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5c2deaa46f69c763df9612e39415b37c60d631be Reviewed-on: https://review.coreboot.org/c/coreboot/+/66398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-07-17soc/amd: Fix some white spaces issuesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ibe20d48bdd8c776f9658620a13814f96e564dabc Reviewed-on: https://review.coreboot.org/c/coreboot/+/65907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16soc/amd/[cezanne,picasso,sabrina]/Kconfig: Add PSP_APOB_DRAM_SIZE config optionFred Reitberger
The APOB in sabrina is larger than in cezanne/picasso and no longer fits in the previously allocated 64K space for it. Other symbols are placed immediately after the APOB region and end up corrupting the APOB data on sabrina. Add a Kconfig option to specify the APOB size in DRAM to reserve enough memory and increase the size for sabrina to 128K TEST=Timeless builds are identical for mandolin/majolica for PCO/CZN. Build chausie and verify symbols do not overlap _apob region BUG=b:224056176 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia5dbacae67ff02fc8a6ec84b9007110ca254daa3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-14lib/program_loaders.c: Mark run_ramstage with __noreturnArthur Heymans
This allows the compiler to optimize out code called after run_ramstage. Also remove some die() statements in soc code as run_ramstage already has a die_with_postcode statement. Change-Id: Id8b841712661d3257b0dc67b509f97bdc31fcf6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-07-14soc/amd/*: Move apm call out of MP init codeArthur Heymans
This makes it easier to have common code for MP init on AMD systems. Change-Id: Icb6808edf96a17ec0b3073ba2486b3345a4a66ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-04treewide: Unify Google brandingJon Murphy
Branding changes to unify and update Chrome OS to ChromeOS (removing the space). This CL also includes changing Chromium OS to ChromiumOS as well. BUG=None TEST=N/A Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-21soc/amd/*/Kconfig: drop unused SOC_AMD_COMMON_BLOCK_UCODE_SIZE optionFelix Held
Commit 96f7b96866b0bce7a1323c4da478f838f884383f (soc/amd/common/block/ cpu/: Make ucode update more generic) removed the code that used the SOC_AMD_COMMON_BLOCK_UCODE_SIZE Kconfig value. Drop the now unused Kconfig option. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I079f229678452ff20d8bb282804cd2e49555a6fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65255 Reviewed-by: ritul guru <ritul.bits@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-06-21soc/amd/*: Move selection of DRIVERS_I2C_DESIGNWARE to common blockMatt DeVillier
All AMD SoCs which select SOC_AMD_COMMON_BLOCK_I2C also select DRIVERS_I2C_DESIGNWARE, so make the pairing explicit by moving the selection into SOC_AMD_COMMON_BLOCK_I2C. This will facilitating adding the Designware I2C bus ops handler in a subsequent commit. Change-Id: Ice30c8806766deb9a6ba617c3e633ab069af3b46 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-06-20soc/amd/*: Make mtrr decision based on syscfgArthur Heymans
The syscfg has to option to automatically mark the range between 4G and TOM2, which contains DRAM, as WB. Making it generally not necessary to allocate MTRRs for memory above 4G if no PCI BARs are placed up there. Change-Id: Ifbacae28e272ab2f39f268ad034354a9c590d035 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-06-09soc/amd/sabrina/acpi: Correct VID decoding on SabrinaFred Reitberger
Sabrina uses the SVI3 spec for VID tables which is incompatible with the SVI2 spec used on PCO/CZN. Move the defines from common to soc and update the decoding for sabrina. See NDA docs #56413 for SVI3 and #48022 for SVI2 VID tables TEST=timeless builds on mandolin/majolica for PCO/CZN build chausie and verify pstate power is correct in ACPI tables Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I915e962f11615246690c6be1bee3533336a808f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65001 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-06-07arch/x86: Add a common romstage entryArthur Heymans
It might be possible to have this used for more than x86, but that will be for a later commit. Change-Id: I4968364a95b5c69c21d3915d302d23e6f1ca182f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-06-07soc/amd/common/block/cpu/: Make ucode update more genericFred Reitberger
Use the equivalent cpuid in the microcode header to name the update file in cbfs. This allows the SOC to directly locate its microcode file when there are multiple processor revisions. TEST: Loaded a chausie with sabrina, cezanne, and picasso microcode files and booted. Verified that only the sabrina microcode file was successfully loaded Change-Id: I84a2480cf8274d53ffdab7864135c1bf001241e6 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-05-16soc/amd/cezanne/fsp_m_params: fix modification of constantFred Reitberger
mcfg->usb_phy is a pointer to a struct usb_phy_config. The config is constant. Changing a constant is undefined behavior, so create a local static instance of usb_phy_config that can be modified safely. Change-Id: If9b76b869a5b0581f979432ce57cc40f1c253880 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-05-16soc/amd/cezanne/fsp_m_params: add defines for FSP USB struct versionFelix Held
Add and use defines instead of magic values in fsp_m_params.c. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie0e33eb0af5310ab4610ea8951688464c4960260 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64126 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-16soc/amd/cezanne/fsp_m_params: don't hard-code USB PHY config table sizeFelix Held
Use sizeof instead of having a hard-coded struct length. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I85dc2fce11d9a670b2037d8a6a694177cfaa2177 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-03soc/amd/cezanne/fw.cfg: provide default SPL table binaryFelix Held
Chause doesn't get to x86 bootblock without the SPL table binary in the PSP directory table, so I assume that Majolica won't get to x86 bootblock either, since the Cezanne SoC default is not to include any SPL table binary. This was caused by a combination of commit 6c5ec8e31ccbe3d9bbf201c956fc3b54703a9767 (amdfwtool: Add options to support mainboard specific SPL table) that caused a regression in amdfwtool and commit c5b912f788765560c1db08f3341826b9c548b865 (soc/amd/cezanne: Allow to specify SPL table path in Kconfig) that removed the default for the Cezanne SoC. Fix this by adding the default SPL table file back to the fw.cfg file which will get ignored by amdfwtool when a mainboard selects SPL_TABLE_FILE and specifies another SPL table binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica960e5422da50899a2d9c192863188174e0bcff Reviewed-on: https://review.coreboot.org/c/coreboot/+/61896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-01arch/x86/Kconfig: Drop obsolete fixed ramstage symbolsArthur Heymans
On x86 ramstage is always relocated at runtime in cbmem so there is no need to have this configurable in Kconfig. Change-Id: I01b2335d0b82bea8f885ee5ca9814351bbf2aa3c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63215 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-25soc/amd/cezanne/cpu.c: Skip SMMINFO init in S3 resumeFred Reitberger
SMMINFO is already set up in S5, so it should be skipped in S3 resume BUG=b:194990818 TEST=Build guybrush Change-Id: I30ee6d7006ddac4dbdae9825bd4fa6eac7fd48cb Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-23amdfwtool: Change the some FW's level for A/B recoveryZheng Bao
The Pubkey(0), PSP bootloader(1) and IKEK(0x21) should be put to level 2 only for A/B recovery for Sabrina, which is going to be the long term and A/B recovery layout only. So the amdfwtool should be changed for Sabrina. The old levels of these 3 FWs are for Cezanne, which doesn't use AB recovery now. Just set the specific field levels in generic Cezanne folder for demo. Leave the fw.cfg in Guybrush unchanged. Change-Id: I11092b52927b2c526a5be719104ba39a790b6fa8 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-23soc/amd/cezanne: Turn off gpp clock request for disabled devicesRobert Zieba
The current behavior does not actually check if a device is present before enabling the corresponding gpp_clkx_clock_request_mapping bits which may cause issues with L1SS. This change sets the corresponding gpp_clkx_clock_request_mapping to off if the corresponding device is disabled. BUG=b:202252869 TEST=Checked that value of GPP_CLK_CNTRL matched the expected value when devices are enabled/disabled, checked that physically removing a device that is marked as enabled also disables the corresponding clk req BRANCH=guybrush Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I77389372c60bdec572622a3b49484d4789fd4e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61259 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-23soc/amd/cezanne: Add PSP Bootloader for AB recovery in fw.cfgZheng Bao
TypeId0x01_PspBootLoader_AB_Stage1_CZN.sbin is bootloader for A/B recovery. Both bootloader can be put in the fw.cfg. The amdfwtool decides which booloader is dropped in the directory. Change-Id: I099b4c98d64dba935bf3ea2b7f191da83b9bd95e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
2022-03-23soc/amd/common/psp_verstage: Write postcodes after ESPI initKarthikeyan Ramasubramanian
On boards where PSP uses ESPI to write postcodes, update the verstage to do it after ESPI initialization. BUG=b:224543620 TEST=Build and boot to OS in Nipperkin. Ensure that there are no attempts to write the post code from PSP verstage before ESPI initialization. Change-Id: I1b78931c741c75dc845c9b34e3b2b896221f2364 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mohan Viswanathan Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-17soc/amd/cezanne: Add counter initializersJon Murphy
Some counters are not being initialized and are relying on mainboards to set their values. If the mainboards have not implemented these functions it leads to indeterminate behavior. BUG=b:224987813 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I254e26080319478b1b5b1f5c353a7966cfac63b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10soc/amd/{common/vboot,cezanne}: Copy S0i3 verstage logs into cbmemRaul E Rangel
Now that SMM can write to CBMEM we can simply replay the transfer buffer cbmem console to move it into the main cbmem console. replay_transfer_buffer_cbmemc() relies on the EARLY_RAM linker symbols. Since the SMM rmodule get linked with a different linker script than bootblock/romstage it doesn't have access to these symbols. In order to pass these symbols into SMM, we parse the bootblock.map file and generate an early_ram.ld script. This script is then used when linking SMM. I replay the buffer in `smm_soc_early_init` because this call happens before `console_init()`. `console_init()` prints the SMM header and we want to append the verstage contents before printing the header to avoid confusion. BUG=b:221231786 TEST=Perform S0i3 cycles and verify PSP verstage logs now show up when doing `cbmem -c`. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I64d33ccdee9863270cfbcaef5d7c614349bd895c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-10soc/amd/cezanne/psp_verstage: Log the platform boot mode reportKarthikeyan Ramasubramanian
Log the platform boot mode reported by PSP verstage to PSP stage 1 bootloader. This helps to improve the debuggability. BUG=b:193050286 TEST=Build and Boot to OS in Nipperkin. Ensure that the platform boot mode is logged in the verstage logs. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I752ee56f2af48215a770d799432d02f0609757cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-03-09soc/amd/*/lpc: rename SPIROM_BASE_ADDRESS_REGISTERFelix Held
Rename SPIROM_BASE_ADDRESS_REGISTER to SPI_BASE_ADDRESS_REGISTER to clarify that this isn't the address the SPI flash gets mapped, but the address of the SPI controller MMIO region. This also aligns the register name with the PPR. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd9f98bd01b1c7197b80d642a45657c97f708bcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-08timestamps: Rename timestamps to make names more consistentJakub Czapiga
This patch aims to make timestamps more consistent in naming, to follow one pattern. Until now there were many naming patterns: - TS_START_*/TS_END_* - TS_BEFORE_*/TS_AFTER_* - TS_*_START/TS_*_END This change also aims to indicate, that these timestamps can be used to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-03-03soc/amd/*/northbridge,root_complex: add comment about PCI BARsFelix Held
Add a comment to point out that the read_resources functions aren't missing a pci_dev_read_resources call that would add the resources for the BARs of the PC device. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie480832e0d7954135d2171dda986e477ef7b6c09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/*/northbridge,root_complex: simplify GNB IOAPIC resource indexFelix Held
In the northbridge's and root complex' read_resources function, the GNB IOAPIC resource used MMIO base address of the GNB IOAPIC as index which might be misleading. Instead use idx++ as a unique index for this resource. TEST=Resource allocator doesn't complain and no related warnings or errors in dmesg. The update_constraints console output changes like expected: Before: PCI: 00:00.0 fec01000 base fec01000 limit fec01fff mem (fixed) After: PCI: 00:00.0 0d base fec01000 limit fec01fff mem (fixed) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8061364879d772469882fc060f92676de6f600a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-03soc/amd/*/northbridge,root_complex: simplify mmconf_resource indexFelix Held
In the northbridge's and root complex' read_resources function, the mmconf resource used the number of the MMIO_CONF_BASE MSR as index which might be misleading. Instead use idx++ as a unique index for this resource. TEST=Resource allocator doesn't complain and no related warnings or errors in dmesg. The update_constraints console output changes like expected: Before: PCI: 00:00.0 c0010058 base f8000000 limit fbffffff mem (fixed) After: PCI: 00:00.0 06 base f8000000 limit fbffffff mem (fixed) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id66c6153fad86bed36db7bd2455075f4a0850750 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-02soc/amd/common/vboot: Remove parameter to replay_transfer_buffer_cbmemcRaul E Rangel
We don't need to force the caller to look up and cast the transfer region. We can do it in the function. BUG=b:221231786 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib46a673ef5a43deb56a6d522152085036a47ab66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-03-02soc/amd/common/vboot: Split transfer buffer methods into separate fileRaul E Rangel
I want to reuse the transfer buffer methods in SMM, so I need to add them into their own file. I renamed `setup_cbmem_console` to `replay_transfer_buffer_cbmemc` so it has a more descriptive name. I also fixed the comment on `verify_psp_transfer_buf`. BUG=b:221231786 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4f3a8b414b91f601c3a9c3dc7af8f388286fe4da Reviewed-on: https://review.coreboot.org/c/coreboot/+/62348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-25arch/x86: consolidate HPET base address definitionsFelix Held
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO region which is 0xfed00000 on all chipsets and SoCs in the coreboot tree. Since these two different constants are used in different places that however might end up used in the same coreboot build, drop the Kconfig option and use the definition from arch/x86 instead. Since it's no longer needed to check for a mismatch of those two constants, the corresponding checks are dropped too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-25arch/x86: factor out and commonize HPET_BASE_ADDRESS definitionFelix Held
All x86 chipsets and SoCs have the HPET MMIO base address at 0xfed00000, so define this once in arch/x86 and include this wherever needed. The old AMD AGESA code in vendorcode that has its own definition is left unchanged, but sb/amd/cimx/sb800/cfg.c is changed to use the new common definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc624051cc6c0f125fa154e826cfbeaf41b4de83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-02-24soc/amd/*/include/soc/iomap.h: rework HPET base address checkFelix Held
The AMD SoCs had a check to make sure that HPET_ADDRESS_OVERRIDE isn't set so that the HPET_ADDRESS Kconfig option will have the right default value. Instead check if the HPET_ADDRESS Kconfig value matches the HPET_BASE_ADDRESS define in the SoC code which is the case if HPET_ADDRESS_OVERRIDE isn't selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icf1832eb36c031e93ba24f342e9a8a7bf13faecc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62275 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-21soc/amd/*/fw.cfg: Remove the misleading name for PMUI and PMUDZheng Bao
Add the information of substance and instance in the string for PMUI and PMUD. It is amdfwtool's job to extract the number from the string. Change-Id: I43235fefcbff5f730efaf0a8e70b906e62cee42e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-18drivers/fsp/fsp2_0: Rework FSP Notify Phase API configsSubrata Banik
This patch renames all FSP Notify Phase API configs to primarily remove "SKIP_" prefix. 1. SKIP_FSP_NOTIFY_PHASE_AFTER_PCI_ENUM -> USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM 2. SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT -> USE_FSP_NOTIFY_PHASE_READY_TO_BOOT 3. SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE -> USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE The idea here is to let SoC selects all required FSP configs to execute FSP Notify Phase APIs unless SoC deselects those configs to run native coreboot implementation as part of the `.final` ops. For now all SoC that uses FSP APIs have selected all required configs to let FSP to execute Notify Phase APIs. Note: coreboot native implementation to skip FSP notify phase API (post pci enumeration) is still WIP. Additionally, fixed SoC configs inclusion order alphabetically.  BUG=b:211954778 TEST=Able to build and boot brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib95368872acfa3c49dad4eb7d0d73fca04b4a1fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-17soc/amd/common/block/i2c: Add support for shared TPM_I2C controllerJan Dabros
There are platforms equipped with AMD SoC where I2C3 controller connected to TPM device is shared between X86 and PSP. In order to handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends acquire and release requests to be accepted by PSP. An example of implementation within Linux kernel is available [1]. There is a need to introduce new ACPI_ID ("AMDI0019") so that dedicated driver on OS side can bind to it and handle this special setup. Since PSP takes care of I2C controller power management, we need to remove PowerResource object from DSDT. BUG=b:204508404 BRANCH=guybrush [1]: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=78d5e9e299e31bc2deaaa94a45bf8ea024f27e8c Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: Iccfc09d8c580d7ab2acb69d26b9c293cf625fb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61863 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-17src/soc: Remove space before tabElyes Haouas
Spaces before tabs are not allowed. Change-Id: I0d2c55c2e0108e59facd92b2e2c0f6c418ef6db0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62055 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-16soc/amd/cezanne/psp_verstage/uart: Fix off by 1 errorRaul E Rangel
We only allow index = {0, 1}. Fix the check. BUG=b:215599230 TEST=Build guybrush BRANCH=guybrush Found-by: Coverity CID 1469611 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I59615ab39faeded43b3803b4450c84ab8a8b81ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/61988 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-12soc/amd/cezanne/psp_verstage/uart: Fix off by 1 errorRaul E Rangel
FCH_UART_ID_MAX == 2, and there are 2 UARTS, so we don't need the -1. BUG=b:215599230 TEST=Build guybrush Found-by: Coverity CID 1469611 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f0171ed2d3da7f86ba3cfd0457f60d2d5722625 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61869 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-12soc/amd/cezanne: Allow to specify SPL table path in KconfigZheng Bao
BUG=b:216096562 Change-Id: I4a5ee335ea8808b595dc65ebafd15baedfbdd06e Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-11soc/amd/common/acp: introduce acp_gen1Fred Reitberger
Refactor existing acp code into acp_gen1 variant as preparation for gen2 variant in sabrina. Change-Id: Id9248584237196b5404b79d3a8552cb90fe4491e Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-02-11soc/amd/cezanne,picasso,sabrina: Fix incorrect values of CBFS amdfw position ↵Robert Zieba
makefile variables Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded. This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well. BUG=b:198322933 TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-02-08soc/amd/cezanne: Disable CONSOLE_CBMEM_PRINT_PRE_BOOTBLOCK_CONTENTSRaul E Rangel
Now that PSP verstage can directly write to the UART, we no longer need to manually dump the cbmem contents. Ideally if we can get picasso to add support for mapping the UART, or if we implement bit banging we can delete this functionality completely. BUG=b:215599230 TEST=Boot guybrush and verify verstage logs aren't printed twice Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id70b24625c3b2f3d6fe470cf227a0083f5b974f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-08soc/amd/cezanne/psp_verstage: Implement get_uart_baseRaul E Rangel
This will allow directly using the UART console. On PSP releases that don't support mapping the UART, we will just return NULL which is perfectly acceptable. BUG=b:215599230 TEST=Boot guybrush and verify verstage can print to the console Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic8d7f0fe00794a715756f92e3fb32c6b512cb8aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/61607 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-02-07soc/amd/cezanne: Add the fw SPL to fw.cfgZheng Bao
SPL: Security Patch Level The data in SPL is used for FW anti-rollback, preventing rollback of platform level firmware to older version that are deemed vulnerable from a security point of view. BUG=b:216096562 Change-Id: I0aa456b8b4eec506fbb319293f0903b293325cb0 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-05cpu/x86/lapic: Move LAPIC configuration to MP initKyösti Mälkki
Implementation for setup_lapic() did two things -- call enable_lapic() and virtual_wire_mode_init(). In PARALLEL_MP case enable_lapic() was redundant as it was already executed prior to initialize_cpu() call. For the !PARALLEL_MP case enable_lapic() is added to AP CPUs. Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-03soc/amd/*/i2c: factor out common I2C pad configurationFelix Held
The I2C pad control registers of Picasso and Cezanne are identical and the one of Sabrina is a superset of it, so factor out the functionality. To avoid having devicetree settings that contain raw register bits, the i2c_pad_control struct is introduced and used. The old Picasso code for this had the RX level hard-coded for 3.3V I2C interfaces, so keep it this way in this patch but add a TODO for future improvements. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-03soc/amd/*/i2c: introduce and use MISC_I2C_PAD_CTRL(bus) macroFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9d098a55a5c6f6e022c3896750c752e2759e101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-02-03soc/amd/*/i2c: drop unused mainboard_i2c_overrideFelix Held
No mainboard in the current tree implements mainboard_i2c_override. In a follow-up commit the i2c_pad_control struct is introduced to be able to make more parameters controllable by devicetree settings in the future. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f9ed5d50d26e4623dc5888cc8af090fdd00fc03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61566 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-02soc/amd/cezanne: Rename PSP_POSTCODES_ON_ESPI to PSP_INIT_ESPIRaul E Rangel
This flag only controls eSPI init in the PSP Stage 2 Boot Loader. It doesn't control if port 80s are written. This flag also doesn't currently control LPC init. The PSP is currently hard coded to remove any LPC init. BUG=b:215425753 TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idf3f0dcc216df2fd15b016f9458a208b7e15c720 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61534 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-02soc/amd/cezanne,vc/cezanne: Implement svc_write_postcodeRaul E Rangel
This will allow verstage to write post codes. BUG=b:215425753 TEST=Boot guybrush and verify PSP post codes are printed 22-01-31 15:12:03.214 (S3->S0) 22-01-31 15:12:03.214 03 04 0f 0e f0 f1 f2 01 10 a0 a2 <--new Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ceee8fcb094f462de99c07aef8e96425d9c3270 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61522 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-01psp_verstage: report developer mode to PSPKangheui Won
Add platform_report_mode function which report current developer mode status to the PSP. L1 widevine app in the PSP will use this information to select key box. BUG=b:211058864 TEST=build and boot guybrush TEST=build picasso chrome os boards Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I04b5fcfa338b485b36f1b946203f32823385c0b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-02-01psp_verstage: add new svc for cezanneKangheui Won
Add svc_set_platform_bootmode svc to cezanne. PSP will use this information to select proper widevine keybox. BUG=b:211058864 TEST=build guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6bcc9e49a2b73d486cfecd7b240bf989cad94630 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-26src: Add missing 'void' in function definitionElyes HAOUAS
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-26soc/amd/cezanne,picasso,sabrina: factor out get_threads_per_coreFelix Held
This code is common to at least all Zen-based APUs (Picasso, Cezanne, Sabrina) and is also useful outside of the SoC-specific dynamic ACPI table generation code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie96d4429fb6ed9223efed9b3c754e04052d7ca7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-by: Eric Peers <epeers@google.com>
2022-01-25soc/amd/cezanne: FSP: Add UPD entry for eDP tuningZheng Bao
The FSP gets these values from the UPD and sets the internal values. The document about eDP tuning is attached in issue tracker of this ticket, at the issue tracker b/203061533#comment6. BUG=b:203061533 Cq-Depend: chrome-internal:4303901 Change-Id: I9b85faac4f2fa1fb2c14bb85b615346d4379baac Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-25soc/amd/cezanne: Increase PRERAM_CBMEM_CONSOLE_SIZE to 0x2000Raul E Rangel
Let's increase this to avoid losing any logs. BUG=b:213828947 TEST=Boot guybrush and no longer see *** Pre-CBMEM romstage console overflowed, log truncated! Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-23soc/amd/{common,cezanne,picasso}: Add PRE_X86_CBMEM_CONSOLE_SIZERaul E Rangel
This change splits the size of the console transfer region and size of the bootblock/romstage Pre-RAM console region. This allows having a larger Pre-RAM console while not impacting the size of the PSP verstage console. Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in `setup_cbmem_console`, I chose to use the offsets provided in the transfer buffer. It would be nice to eventually do this for all the fields in the transfer buffer. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are no longer truncated Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-20soc/amd/cezanne,picasso: factor out common early non-car cache setupFelix Held
This implementation is the same for all SoC that select SOC_AMD_COMMON_BLOCK_NONCAR, so factor it out to the common AMD non-CAR CPU support code folder. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53528f0bb75e9d945740ad5065c75e7de7b5878f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61257 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-20soc/amd/cezanne/include/espi.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I393feab8550a7124ab2982ff3d256e3491d27b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-18soc/amd/{picasso,cezanne}: Enable CBMEM_PRINT_PRE_BOOTBLOCK_CONTENTSRaul E Rangel
This will help debugging verstage failures. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are printed before bootblock messages. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia60991b3e81c19c24ceb69193840dde873ef3346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-14soc/amd/cezanne: factor out eSPI SPI2 pads configuration functionsFelix Held
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses some of the registers directly. BUG=b:183149183 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-13soc/amd/*/chip.h: add missing gpio.h includeFelix Held
Since we need the GPIO defines in the devicetree settings, include gpio.h in each SoC's chip.h file which will indirectly include the soc-specific soc/gpio.h header instead of having it indirectly included via soc/i2c.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id26721a6b8ae94784d4a90d7ccac28fef2be36dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/60977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-11soc/amd/cezanne/include/i2c: add missing types.h includeFelix Held
uintptr_t is defined in stdint.h which gets included by types.h. I use types.h instead of stdint.h, since that's also what the Picasso code does. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id3d0811d831b5acc9343398f4d28c73467c0a429 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-11soc/amd/cezanne/include/i2c: move include inside header guardFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a8c21c462258c8a419ccc3f2db50f74a154e465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-10src/soc/amd: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: Iff7fdd679ac31a121d56746ed8efa1b3da932638 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-20soc/amd/cezanne: Correct S0i3 verstage softfuse bitRob Barnes
PSP_S0I3_RESUME_VERSTAGE softfuse bit is 58, not 40. BUG=b:202397678 BRANCH=None TEST=Boot guybrush, ensure S0i3 verstage runs with latest PSP. Change-Id: Ia27f6e48e345aac0d5f6579d663a6b655688239a Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-20soc/amd/cezanne/fch: disable 48MHz output in S0i3Felix Held
S0i3 is a low power state which reduces the power consumption to about the level of the S3 suspend state where the DRAM is kept in a self- refresh state and most of the rest of the system is powered down. So everything that can be switched off in the S0i3 state should be switched off in order to maximize the standby time. BUG=b:210722314 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If445f5825dc7b795c95d73c061156cc485421ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-18soc/amd/cezanne/acpi: Add support for RTC workaroundRaul E Rangel
The RTC on Cezanne is an unstable wake source when the system is in S0i3. We instead need to use an internal timer that triggers a GPIO that acts as a wake source. This change provides the ACPI necessary to allow the OS to manage the wake source. BUG=b:209705576 TEST=Boot guybrush with this patch and several OS patches. Verified the OS sets the correct wake bit, the system correctly suspends and resumes, and the wake source is correctly accounted for. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-14soc/amd/{cezanne,common}: Add PSP_S0I3_RESUME_VERSTAGE Kconfig optionRob Barnes
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this in PSP. BUG=b:200578885, b:202397678 BRANCH=None TEST=Verstage runs during s0i3 resume on Nipperkin Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-13soc/amd/cezanne: Don't select CPU_INFO_V2 explicitlyNico Huber
It's already implied by PARALLEL_MP now. Change-Id: Ia76f1a925b2c0ebbba0bf20b094e716708d540c2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/{cezanne,picasso,stoney,common}: Don't clear PM1 on resumeRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit (and thus passing control to OSPM). For ACPI > only platforms (where SCI_EN is always set), when transitioning from > either the mechanical off (G3) or soft-off state to the G0 working > state this register is cleared prior to entering the G0 working state. This means we don't want to clear the PM1 register on resume. By clearing it the linux kernel can't correctly increment the wake count when the power button is pressed. The AMD platforms implement the _SWS ACPI methods, but the linux kernel doesn't actually use these methods. BUG=b:172021431 TEST=suspend zork and push power button and verify power button wake_count increments. Verified other wake sources still work. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/{cezanne,picasso,stoney}: Clear PM/GPE when enabling ACPIRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states# > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit. This change makes sure we clear the PM/GPE blocks are cleared before enabling the SCI_EN bit. BUG=b:172021431 TEST=Boot guybrush and morphius to OS and verify suspend resume still works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-03soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian
Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30soc/amd/cezanne: add missing PM_ACPI_* bit definitionsFelix Held
This part was copied from Picasso but Cezanne has some more bits used so add the definitions now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29cpu/x86: Rename X86_AMD_INIT_SIPI to X86_INIT_NEED_1_SIPISubrata Banik
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage the same logic (to skip 2nd SIPI and reduce delay between INIT and SIPI while perform AP initialization) even on newer Intel platform. Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25soc/amd/*/data_fabric: use DF_ prefix for bit and shift definesFelix Held
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE clarifies the scope of those definitions. For consistency also add this prefix to MMIO_DST_FABRIC_ID_SHIFT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/*/include/data_fabric: make MMIO_NP definition SoC-specificFelix Held
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register is bit 12, but that has changed to bit 16 in Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64c06b84e2c0737b259077e7932f418306638e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-16lib/prog_loaders, soc/amd/: Make payload_preload use cbfs_preloadRaul E Rangel
Now that CBFS has this functionality built in, we no longer need to manually code it. payload_preload used to use the payload_preload_cache region to store the raw payload contents. This region was placed outside the firmware reserved region, so it was available for use by the OS. This was possible because the payload isn't loaded again on S3 resume. cbfs_preload only uses the cbfs_cache region. This region must be reserved because it gets used on the S3 resume path. Unfortunately this means that cbfs_cache must be increased to hold the payload. Cezanne is the only platform currently using payload_preload, and the size of cbfs_cache has already been adjusted. In the future we could look into adding an option to cbfs_preload that would allow it to use a different memory pool for the cache allocation. BUG=b:179699789 TEST=Boot guybrush and verify preloading the payload was successful CBFS DEBUG: get_preload_rdev(name='fallback/payload') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc521b238620ff52b8ba481cd3c10e5c4f1394bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-13sod/amd/cezanne: Use LZ4 for FSP-M when using SPI DMARaul E Rangel
This change adds about 30 KiB to FSP-M. When not using the SPI DMA controller, this change actually has a ~7 ms boot time penalty. When we use the DMA engine, we end up with about a 5 ms decrease. Once we switch to 100 MHz SPI this will help even more since we have effectively eliminated the decompression time. BUG=b:179699789 TEST=Boot nipperkin to OS and take boot time measurements fspm.bin 0x2efc0 fsp 90953 LZMA (233472 decompressed) fspm.bin 0x2cfc0 fsp 121156 LZ4 (233472 decompressed) - FSP-M / no async - | 508 - finished loading body | 177.019 | 179.384 Δ( 2.36, 0.16%) | ... | 970 - loading FSP-M | 0.346 | 0.346 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.01 Δ( 0.00, 0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 53.916 | 59.475 Δ( 5.56, 0.37%) | - FSP-M / async - | 508 - finished loading body | 177.185 | 179.689 Δ( 2.50, 0.18%) | ... | 970 - loading FSP-M | 0.989 | 0.99 Δ( 0.00, 0.00%) | | 17 - starting LZ4 decompress (ignore for x86) | 9.483 | 12.877 Δ( 3.39, 0.24%) | | 18 - finished LZ4 decompress (ignore for x86) | 10.833 | 0.312 Δ(-10.52, -0.75%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7d0363d27d98d4ed3afc6f802a13ff7986391921 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-12soc/amd/cezanne: Use LZ4 for FSP-SRaul E Rangel
This change increases the fsps.bin by 20 KiB, but it decreases decompression time. When not using preloading we save about 4 ms, when using preloading we save about 6. BUG=b:179699789 TEST=Boot nipperkin to OS fsps.bin 0x4afc0 fsp 66253 LZMA (200704 decompressed) fsps.bin 0x45fc0 fsp 87157 LZ4 (200704 decompressed) - FSP-S / no async - | 505 - starting to verify keyblock/preamble (RSA) | 9.36 | 11.012 Δ( 1.65, 0.11%) | ... | 971 - loading FSP-S | 7.095 | 6.141 Δ( -0.95, -0.07%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.009 | 0.008 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 15.149 | 8.98 Δ( -6.17, -0.42%) | | 954 - calling FspSiliconInit | 0.038 | 0.037 Δ( -0.00, -0.00%) | - FSP-S / async - | 508 - finished loading body | 177.978 | 179.689 Δ( 1.71, 0.12%) | ... | 971 - loading FSP-S | 6.928 | 7.225 Δ( 0.30, 0.02%) | | 17 - starting LZ4 decompress (ignore for x86) | 0.011 | 0.01 Δ( -0.00, -0.00%) | | 18 - finished LZ4 decompress (ignore for x86) | 8.312 | 0.241 Δ( -8.07, -0.58%) | | 954 - calling FspSiliconInit | 0.091 | 0.09 Δ( -0.00, -0.00%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib0479ed3c92158799ea2b023bd2ce4c5c09757dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-12soc/amd/cezanne: Preload FSP-SRaul E Rangel
FSP-S is normally memmapped and then decompressed. There are about 7 ms between starting ramstage, and loading FSP-S. By preloading we can ensure the fsps.bin is already in RAM by the time we need it. This reduces boot time by about 7 ms. BUG=b: TEST=Boot nipperkin and see ~7ms reduction in boot time | 10 - start of ramstage | 0.044 | 0.044 Δ( 0.00, 0.00%) | | 30 - device enumeration | 1.899 | 2.073 Δ( 0.17, 0.01%) | | 971 - loading FSP-S | 6.645 | 6.628 Δ( -0.02, -0.00%) | | 15 - starting LZMA decompress (ignore for x86) | 0.016 | 0.01 Δ( -0.01, -0.00%) | | 16 - finished LZMA decompress (ignore for x86) | 15.266 | 8.316 Δ( -6.95, -0.47%) | | 954 - calling FspSiliconInit | 0.08 | 0.09 Δ( 0.01, 0.00%) | CBFS DEBUG: _cbfs_alloc(name='fsps.bin', alloc=0xc9761e5c(0xc97a3f0c), force_ro=false, type=-1) CBFS: Found 'fsps.bin' @0x1a1fc0 size 0x102cd in mcache @0xc97dd208 waiting for thread took 1 us <-- fsps.bin was preloaded CBFS DEBUG: get_preload_rdev(name='fsps.bin') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5a728047b8ad92d70bba8485017579aa3df48d95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-10soc/amd/cezanne/fsp_m_parameters: add curly braces around else blockFelix Held
Since the if block contains multiple statements, it uses curly braces around them, so also add curly braces around the else block even though it only contains one statement. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia8d6b45ec16916ff77078446414de259cffa1475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59070 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-10soc/amd/cezanne,picasso/include/southbridge: use bitwise or in definesFelix Held
Use bitwise or instead of additions to build bit masks with multiple bits set. TEST=Timeless build results in identical image on amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I42cc6686d8fa3f694a46ba4ca801a822ef1db1d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-09soc/amd/cezanne,picasso/include/southbridge: fix typo in defineFelix Held
In both the Picasso PPR (rev 3.16) and the Cezanne PPR (rev 3.03) bit 16 of the misc I2C pad control registers is defined as BiasCrtEn, so rename I2C_PAD_CTRL_BIOS_CRT_EN to I2C_PAD_CTRL_BIAS_CRT_EN. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If39ac17a433cb90c944fdde038cd246a995e193a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59028 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-08soc/amd/{cezanne,picasso}: Stop passing base for fspm.binRaul E Rangel
We no longer need to do this since we relocate at runtime. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ibef849d5b3f0290cb7b7c5ff18aabe002bf53344 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-08soc/amd/cezanne: Enable CBFS_PRELOADRaul E Rangel
The follow up CLs will use CBFS_PRELOAD. The default CBFS_CACHE_SIZE was derived by examining the `cbfstool print` output and summing the files we intend to preload. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I208067e6ceec6ffb602a87bee3bf99a0a75c822d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-08soc/amd/cezanne: Add ASYNC_FILE_LOADINGRaul E Rangel
This gives us a knob that can be controlled via a .config to enable/disable file preloading. I left the option disabled because there is currently a race condition that can cause data corruption when using the SPI DMA controller. The fix will actually introduce a boot time regression because the preloads are happening at the same time as the elog init. I want to keep preloading disabled for now until I get all the sequencing worked out. BUG=b:179699789 TEST=Boot guybrush and verify no preloading happens. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-05soc/amd/*/include/smi: move NUMBER_SMITYPES definition to the topFelix Held
Since all other defines for the number of certain things are at the top of the file, move NUMBER_SMITYPES there as well to keep things consistent. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 14:28:03 +0000