Age | Commit message (Collapse) | Author |
|
There are two conditions within the config space dump code, one to
print offset, one at the end to put a newline. Tweak the printk
strings so the first conditioned printk does it all and move the
second printk out of the loop to the very end.
Change-Id: Ie9dc744406ba20412892df96720e88e24c3d52bc
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73887
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When encountering really incompatible memory configurations, post a
standard POST_RAM_FAILURE code when dying. Gone are the "HALT"
messages that no longer serve any good purpose, instead fatal messages
are edited to always end with "!" to make them stand out even with
loglevel prefix off.
Change-Id: Ie1b9e5a0415e4c64b1f4e935689263f62db012b2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Of the 13 mainboards that implement mainboard_should_reset_usb() hook,
all but one do the same: Stop MRC from resetting USB when resuming
from S3 suspend.
This hook turns out is only here to facilitate a USB reset workaround
on samsung/stumpy for an old ChromeOS kernel which is no longer needed.
Drop the workaround, the hook, and headers no longer used.
roda/rv11/early_init.c is left with no useful code after this patch,
so drop it entirely from both bootblock and romstage.
Change-Id: Ib3a5a00c0a6b1528e39435784919223d16b3914e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
UBSAN complains about "shift out of bounds", likely because integer
literals are signed by default and the result of the operation will
shift into the sign bit, yielding a negative value. However, as the
negative value is then casted to an unsigned type, it works anyway.
To make UBSAN happy, make sure the two troublesome integer literals
are unsigned so that there's no sign bit to shift into.
Tested on out-of-tree Asrock Z97 Extreme6, UBSAN now dies elsewhere.
Link: https://ticket.coreboot.org/issues/449
Change-Id: Iaf8710a5ae4e05d9f41f40f9e3617e155027800c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72806
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the existing IO_APIC2_ADDR definition instead of a magic value.
TEST=Timeless build results in identical image for pcengines/apu2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ee039e23309fdae0d614bb1fb0610d82564bf3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Duplicated branches found using 'Wduplicated-branches' GCC flag.
Change-Id: I252ea6aefb6d6c85135e640ba8deaa118be38f5e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I5b7b1c218a0e8c8ba713b370622fbc37a1e57097
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Removing default on/off from mainboard devicetrees is left as a follow-up.
Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use acpi_create_dmar_ds_ioapic_from_hw() to generate DMAR entries.
This can restore s3 resume capability for Sandy Bridge platforms lost
after commit d165357ec37c ("sb,soc/intel: Use
register_new_ioapic_gsi0()").
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I83e735707cd9ff30aa339443593239cd7e3e4656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>.
Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the remaining DDR2 code to program the registers for memory
timings, ODT, RCOMP, and refresh mode; and perform receive-enable
calibration.
TEST: DDR2 systems boot
- Tested on a Dell Latitude E6400
- Tested on a Compal JHL90
TEST: Ensure DDR3 systems still boot
- Tested on a Thinkpad X200
Change-Id: I6d9a1853fea9e29171d7c2f9ffe7086685c9efad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34834
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move DDR3 memory I/O init to its own function and add DDR2 memory I/O
init. Read I/O init is common to both DDR2 and DDR3.
TEST: DDR2 systems boot (with the rest of the patch train)
- Tested on a Dell Latitude E6400
- Tested on a Compal JHL90
TEST: Ensure DDR3 systems still boot
- Tested on a Thinkpad X200
Change-Id: Ic4d5130f527249d3a5b98bae778cdf21a1753b04
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Split JEDEC init into common and DDR3 specific parts and add the DDR2
specific init code. This also replaces raw `mchbar_clrsetbits32` calls
with a dedicated `jedec_command` function.
TEST: DDR2 systems boot (with the rest of the patch train)
- Tested on a Dell Latitude E6400
- Tested on a Compal JHL90
TEST: Ensure DDR3 systems still boot
- Tested on a Thinkpad X200
Change-Id: I7a57549887c0323e5babbf18f691183412a99ba9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34827
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial support for DDR2. This also changes GM45 raminit to
internally work in units of 1/256 ns for both DDR2 and DDR3 instead of
the 1/8 ns MTB assumed for DDR3, which simplifies the handling of time
values. DDR3 time values are thus scaled by a factor of 32 accordingly.
TODO:
- DDR2 JEDEC init
- Memory IO init
- Register programming
TEST: DDR2 systems boot (with the rest of the patch train)
- Tested on a Dell Latitude E6400
- Tested on a Compal JHL90
TEST: Ensure DDR3 systems still boot
- Tested on a Thinkpad X200
Change-Id: I265938d58c30264fd5d4f7b89da7b689058b8cf8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34826
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I93455f38663cf29d8b5160ac21c94db08eb44fa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I885cc00c8bfcfaaabb2ce2b0269172d8d7a88db5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move specific enum ddr3_module_type to <device/dram/ddr3.h>.
Change-Id: I8fd7892dda26158a5bdd6cd4972c7859a252153e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71547
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icecef272bd4cd2a204c903783787bbec751fe9e5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib1bf132f248d1f3c42d32f884f09687964a0c6f2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Idda0a8330463205efe5ec5faa82a1f458894e521
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If94037f2b010527440795e6920dd7a533c52f606
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I5a3e3506415f424bf0fdd48fc449520a76622af5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71525
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6af7131e151700569d50e8bc42bfaeb7a58fa7d3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71507
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I75bc048d9e04be8d0cab25f6aad1c71d3e7a4008
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71506
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1ff0132e17b08f492828eb13d66e167eae45250d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71505
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I059e94ef46fdc959a6e37365eb335409698b987a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Implement some scaffolding for Haswell native raminit, like bootmode
selection, handling of MRC cache and CPU detection.
Change-Id: Icd96649fa045ea7f0f32ae9bfe1e60498d93975b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement native PCH initialisation for Lynx Point. This is only needed
when MRC.bin is not used.
Change-Id: I36867bdc8b20000e44ff9d0d7b2c0d63952bd561
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement native thermal initialisation for Lynx Point. This is only
needed when MRC.bin is not used.
Change-Id: I4a67a3092d0c2e56bfdacb513a899ef838193cbd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64180
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement native USB initialisation for Lynx Point. This is only needed
when MRC.bin is not used.
TO DO: Figure out how to deal with the FIXME's and TODO's lying around.
Change-Id: Ie0fbeeca7b1ca1557173772d733fd2fa27703373
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement native early ME init for Lynx Point. This is only needed when
MRC.bin is not used.
Change-Id: If416e2078f139f26b4742c564b70e018725bf003
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Implement native DMI init for Haswell and Lynx Point. This is only
needed on non-ULT platforms, and only when MRC.bin is not used.
TEST=Verify DMI initialises correctly on Asrock B85M Pro4.
Change-Id: I5fb1a2adc4ffbf0ebbf0d2d3a444055c53765faa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
__ACPI__ is covered through __ASSEMBLER__.
Change-Id: I6a637e63c6bbe4af7cd52be1893e47d6b5967886
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70697
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Introduce the `USE_NATIVE_RAMINIT` Kconfig option, which should allow
booting coreboot on Haswell mainboards without the need of the closed
source MRC.bin. For now, this option does not work at all; the needed
magic will be implemented in subsequent commits. Add a config file to
make sure the newly-introduced option gets build-tested.
Change-Id: I46c77586f9b5771624082e07c60c205e578edd8e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ie2b1131d7db4b81bd6eb2df7a5ba8a6e8b54539b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ibbefa3d57b17a6a8eb0831eeadf6d629e2765567
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia974da56090b8f9de03c29cda62bc1fb9ef3a082
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I78337cf822cfae177b9ef3040641057a84e90e15
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I3bbb2f02a2dc182956deffc554a6b161a93ad963
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I0984ff1d0b1908bfb7028910f2c6f1083e153520
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I5f11bde99dfcde81c9dc62c1102330c0a6c16e04
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'gpu_lvds_use_spread_spectrum_clock'is only used on i945.
Change-Id: I0f63f18d3f57ef8774f22ca9eb8c20dd39c56cdc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70147
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0a7b3167392c152da6459dfc202ef11b2e61400a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69295
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4f30f5275d38c3eecf54d008b3edbf68071ab10d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69294
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4a49f37e6fe0cb04c8112baf36fd8d01ab218045
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69293
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of using a fake lapic device hook up the cpu cluster to chip
cpu/intel/model_206ax.
The lapic device is also not needed as the mp init will allocate it for
the BSP at runtime.
Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Also remove the now unnecessary comments from the devicetree.
Change-Id: Iebbe12fd413b7a2eb1078a579e194eba821ada7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I718d9dbc184c8bca38f452efea3202901018cb04
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69291
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This only moves CPU configuration to a common place. Other PCI devices
can be done in follow-ups.
Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I70fb470b63ddd06f1d1e34deaea296d81e24f75f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70058
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both SMM_ASEG and SMM_TSEG choices work.
There is periodic TCO timeout occurring.
At least with DEBUG_SMI kernel reports low memory corruption.
Change-Id: If20a7092117612a1a9e25eb6ac480e105acd57d7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: If6c1a17d15e24ecdc56b0cc9cb7e7dc7d6e6936b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Change-Id: Ife134ef6d508113e3cd27b6352ee5044aee43744
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I4baa2e06d336736caf5505a05ed4353bcbfdb517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I713b3fed3fc6d55139badec93a67943dd93ced2a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69333
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Make the implementation more similar to i82801gx, enabling
ACPI PM and GPIO register spaces already in bootblock.
Change-Id: I41ad8622801dbbadafdc37359d521eed42256e63
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I9dd254eddc12966154776d8a2d43f002567e758f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69290
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not clear whether this variable should actually be used or not so
leave it be with a FIXME comment.
Change-Id: I4892600bfec55830acae56d2b293947c2d9ddd07
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69237
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit eb76a455cd39ec59b7f2ba28baeec9538befd59e
and applies minor fixes to make it build again.
PARALLEL_MP was working prior to board removal and no
relevant SMI handlers were implemented. So NO_SMM choice
is now selected.
Change-Id: Ia1cd02278240d1b5d006fb2a7730d3d86390f85b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I955274bc6bda587201f130762c0735c36f5501d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69289
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is now unused by any platform.
Change-Id: I60afbde6ead70f0c887866fc351b4a6a15a89287
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69120
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This code is now unused by any platform.
Change-Id: I5464daa8cfb8231e2b19447c343fc80ab1d68ce8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69119
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all agesa CPUs are removed this code is unused.
Change-Id: If0c082bbdb09457e3876962fa75725add11cb67c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69118
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I589f30ccf81b6cf243ac7cbf8320a3f830649ad8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69117
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I18eb1c1ccad16980a4e57318dec411b82c45b25a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69116
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This platform use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: Ieaac0a32e71d208b66fd2c4e26f5349abc921d4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69115
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This board use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69114
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: If40010abdf180e40c2aab7a991c7382dc5b2d7d5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I07c24ece29616fa008da0935c3fe71e35f16ed2d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ie43e818d03f411733e1bba5b7a4721c9a54ff4a4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3a3a45a1a36ea6ad0b8fb2d3ee78add0b38460ac
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3cc2a9786dfb1f8fb1ec8e78bde7c46c07f8da48
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Replace `while (...);` with `do {} while (...);` so that it's easier to
distinguish polling loops from something else, like function calls. The
`{}` can be understood as "nothing", so that the construct is naturally
read as "do nothing while (...)".
Another reason to prefer this method is that Jenkins does not complain.
Change-Id: Ifbf3cf072f8b817b2fdeece4ef89bae0822bb6e6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I692b86bba28853186185846f63dad1dcbfce1eea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia87fbbeb9ecb57ee2f4879404cbae5403de9bfc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I4fb845bb4145d47aea39d7e5493d854d00e289aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I94dd6b1bb81bbc38ac5f89469b3ed7c83ca2a498
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I22d7e724e69b41c9fabdef785276dc428be2b400
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested on unsupported mainboard (945g-m4).
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1935308cc50abd651b52d6290d66180905c6a521
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68087
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
i945.h file is not used to generate asl files.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I93bf96f8a86a2652a88f3a129ec197048dd914a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68215
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I0e5f102d75647c9c184cb7422af30c9196503882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I055847c9b08795683fe2e1dfd7fcde49901fc973
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: I7edf19f71095fb38161f19d511997cdc2fe0d76c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: Id95e2dec4a6f3e70234fff1df67ee61e08731400
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68411
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I80f3d2c90c58daa62651f6fd635c043b1ce38b84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Selecting *Output verbose RAM init debug messages*
(`CONFIG_DEBUG_RAM_SETUP=y`) the build fails due to the missing header.
CC romstage/northbridge/intel/i945/raminit.o
src/northbridge/intel/i945/raminit.c: In function 'ram_read32':
src/northbridge/intel/i945/raminit.c:77:39: error: expected ')' before 'PRIxPTR'
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~
src/northbridge/intel/i945/raminit.c:25:52: note: in definition of macro 'PRINTK_DEBUG'
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:22:1: note: 'PRIxPTR' is defined in header '<inttypes.h>'; did you forget to '#include <inttypes.h>'?
21 | #include "chip.h"
+++ |+#include <inttypes.h>
22 |
src/northbridge/intel/i945/raminit.c:25:39: note: to match this '('
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:77:9: note: in expansion of macro 'PRINTK_DEBUG'
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~~~~~~
src/northbridge/intel/i945/raminit.c:77:22: error: spurious trailing '%' in format [-Werror=format=]
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^~~~~~~~~~~~~~~~
src/northbridge/intel/i945/raminit.c:25:52: note: in definition of macro 'PRINTK_DEBUG'
25 | #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
| ^
src/northbridge/intel/i945/raminit.c:77:36: note: format string is defined here
77 | PRINTK_DEBUG(" RAM read: %" PRIxPTR "\n", offset);
| ^
Include `inttypes.h` to fix it.
Fixes: e8bb6d2b16ac ("Output verbose RAM init debug messages")
Change-Id: If3851ec899d4c7ce5fd64542827f9e0eb546d68b
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7122988a1c88175a2e72c11bb95bfa434ce48ff2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68104
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
use function to check if pci device is on a particular bus
number.
TEST: compiled and qemu run successfully
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I4a3e96381c29056de71953ea2c39cd540f3df191
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68103
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie5d7d1dd446428d12a2f904545682e8fb9cd82f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I360e4f8ed3b87225a09c7cbb761c570a579771cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I94a81a30950cca6be5ba36a25f8bc6f87c2aad2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ic0361e5d928c24cfe7dc0a8b0385fbe73d906b15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62365
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Petr Cvek <petrcvekcz@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This is the same for all supported AMD hardware.
Change-Id: Ic6b954308dbb4c5a2050f1eb8f15acb41d0b81bd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67617
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I6d0d945011fa046b974c6f4554cb9fb15e523afb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67578
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This register has a 1MiB granularity. The lowest bit is a lock bit.
Change-Id: I688cb7818fc849784026ca0bc6acb7ef1ae92133
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66256
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I added this header in commit a6c8b4becbd12fe6043557ca1e398c1a7c691007
(nb/intel/sandybridge: Rewrite get_FRQ). Relicense it as "BSD-3-Clause
OR GPL-2.0-or-later" and move it into the BSD-licensed commonlib part.
Change-Id: I89ebdcdf8d06e78e624e37a443696981b3b17b7d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66711
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|