summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/haswell
AgeCommit message (Collapse)Author
2022-03-08timestamps: Rename timestamps to make names more consistentJakub Czapiga
This patch aims to make timestamps more consistent in naming, to follow one pattern. Until now there were many naming patterns: - TS_START_*/TS_END_* - TS_BEFORE_*/TS_AFTER_* - TS_*_START/TS_*_END This change also aims to indicate, that these timestamps can be used to create time-ranges, e.g. from TS_BOOTBLOCK_START to TS_BOOTBLOCK_END. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I533e32392224d9b67c37e6a67987b09bf1cf51c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-07src: Make PCI ID define names shorterFelix Singer
Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with PCI_{DID,VID}_ using the commands below, which also take care of some spacing issues. An additional clean up of pci_ids.h is done in CB:61531. Used commands: * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g' * find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g' Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-02-25arch/x86: consolidate HPET base address definitionsFelix Held
Both the HPET_BASE_ADDRESS define from arch/x86/include/arch/hpet.h and the HPET_ADDRESS Kconfig option define the base address of the HPET MMIO region which is 0xfed00000 on all chipsets and SoCs in the coreboot tree. Since these two different constants are used in different places that however might end up used in the same coreboot build, drop the Kconfig option and use the definition from arch/x86 instead. Since it's no longer needed to check for a mismatch of those two constants, the corresponding checks are dropped too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia797bb8ac150ae75807cb3bd1f9db5b25dfca35e Reviewed-on: https://review.coreboot.org/c/coreboot/+/62307 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-05cpu,nb/intel: Drop remains of LAPIC_MONOTONIC_TIMERKyösti Mälkki
Leftover from using UDELAY_LAPIC on these platforms. Change-Id: I718050925f3eb32448fd08e76d259f0fb082d2d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-02-04nb/intel/haswell: Report SMBIOS memory speed in MT/sAngel Pons
The memory speed values in SMBIOS tables are expressed in MT/s, not MHz. Adjust the reported frequency values accordingly. Change-Id: If34827fee582ef10057e7540b9d23d8c74bd2a32 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61504 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-30northbridge/intel/haswell/acpi: Use Printf() for debug printsFelix Singer
Change-Id: I3f500ec46a9046a4e8ca50a85965b8e1225f8a33 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-12-16Spell *Boot Guard* with a space for official spellingPaul Menzel
See for example Intel document *Secure the Network Infrastructure – Secure Boot Methodologies* [1]. Change all occurrences with the command below: $ git grep -l BootGuard | xargs sed -i 's/BootGuard/Boot Guard/g' [1]: https://builders.intel.com/docs/networkbuilders/secure-the-network-infrastructure-secure-boot-methodologies.pdf Change-Id: I69fb64b525fb4799bcb9d75624003c0d59b885b5 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-11haswell/lynxpoint/broadwell: Use `azalia_codec_init()`Angel Pons
Use the functionally-equivalent common Azalia code to get rid of redundant code. Change-Id: I83cf1a3a1a3854c9283ccac5e254357a32638dda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59118 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-11arch/x86: Refactor the SMBIOS type 17 write functionSubrata Banik
List of changes: 1. Create Module Type macros as per Memory Type (i.e. DDR2/DDR3/DDR4/DDR5/LPDDR4/LPDDR5) and fix compilation issue due to renaming of existing macros due to scoping the Memory Type. 2. Use dedicated Memory Type and Module type for `Form Factor` and `TypeDetail` conversion using `get_spd_info()` function. 3. Create a new API (convert_form_factor_to_module_type()) for `Form Factor` to 'Module type' conversion as per `Memory Type`. 4. Add new argument as `Memory Type` to smbios_form_factor_to_spd_mod_type() so that it can internally call convert_form_factor_to_module_type() for `Module Type` conversion. 5. Update `test_smbios_form_factor_to_spd_mod_type()` to accommodate different memory types. 6. Skip fixed module type to form factor conversion using DDR2 SPD4 specification (inside dimm_info_fill()). Refer to datasheet SPD4.1.2.M-1 for LPDDRx and SPD4.1.2.L-3 for DDRx. BUG=b:194659789 TEST=Refer to dmidecode -t 17 output as below: Without this code change: Handle 0x0012, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2048 MB Form Factor: Unknown .... With this code change: Handle 0x0012, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2048 MB Form Factor: Row Of Chips .... Change-Id: Ia337ac8f50b61ae78d86a07c7a86aa9c248bad50 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05nb/intel/haswell/northbridge.c: Drop stale commentAngel Pons
This can now be controlled with the `MMCONF_BUS_NUMBER` Kconfig option. Change-Id: If0fdefc5b4339acc843443c551892b397ed39c2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04nb/intel: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I617fea8a09049e9a87130640835ea6c3e2faec60 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-18ACPI: Have common acpi_fill_mcfg()Kyösti Mälkki
As long as there is only one PCI segment we do not need more complicated MCFG generation. Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-13nb/intel/haswell: Add HDAU ACPI deviceMatt DeVillier
The HDAU stub device enables HDMI audio under MacOS. Change-Id: Ifa2155512dd909a4e4a753f6475541e9410dfe91 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-02nb/intel/haswell: Move MRC glue code into a subfolderAngel Pons
Put the Haswell MRC glue code inside a `haswell_mrc` subfolder. Future commits will move the Broadwell MRC/refcode glue code to be in Haswell northbridge scope, so plan in advance. Tested on Asrock B85M Pro4, still boots. Change-Id: Id3e26ec1c2d5ccce928083d7ce41445908df8cf3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55523 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-02nb/intel/haswell/gma.c: Add ULX PCI device IDsAngel Pons
Change-Id: Ida3d2dcdf89342b084c8e1fbf3fae7e47a7238d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50137 Reviewed-by: Jamal Wright <Crabstorage@getbackinthe.kitchen> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-22nb/intel/haswell/pcie.c: Avoid needless deathAngel Pons
Using `config_of(dev)` to access `dev->chip_info` will make coreboot die if the latter is NULL, which is the case for devices detected at runtime (i.e. not statically declared in the devicetree). Given that the code is designed to work when the PEG config is all-zeroes (devicetree default), dying because `dev->chip_info` is NULL is foolish and unwarranted. Introduce a helper function that returns a pointer to devicetree config when available, and otherwise returns a pointer to a zero-filled static struct. In addition, avoid an out-of-bounds access in the very unlikely case where the device's function is too large. Tested on Asrock B85M Pro4, can now boot when `device pci 01.0 on end` is commented out in its devicetree. Without this commit, it could not. Change-Id: Ia2d3a03da9eab601fb834b0c51a8a51c9ae14c33 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-22nb/intel/haswell/pcie.c: Introduce helper variableAngel Pons
Introduce a helper variable to avoid some redundancy and to reduce the diffstat noise in follow-up changes. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I490675aaddd2b5a13d990664431f79a605999254 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-22nb/intel/haswell/pcie.c: Fix getting PCI functionAngel Pons
Use `dev->path.pci.devfn` to obtain the `devfn` that `PCI_FUNC` needs. Tested on Asrock B85M Pro4, `PCI_FUNC` now obtains the correct value. Change-Id: Ia3bbd56ce0adba9d24f62ffc016cd825bcf3cc6a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-06-16MRC platforms: Fix MRC version printk format specifiersAngel Pons
The printed values are unsigned, and should be printed accordingly. Change-Id: Ie5edce914c389c70460b1ed3390731e3568340dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16nb/intel/haswell: Fully handle GDXCBAR and EDRAMBARAngel Pons
GDXCBAR and EDRAMBAR are accounted for when reporting resources to the allocator, but they are not present in the DSDT. In addition, coreboot does not enable either range, but MRC.bin sets up GDXCBAR and does not disable it afterwards. Not reporting GDXCBAR in the DSDT can result in resource conflicts, and not enabling EDRAMBAR can cause issues on CPUs with eDRAM. Enable both GDXCBAR and EDRAMBAR in coreboot code, and report these ranges in the DSDT. This matches what Broadwell does. The value for the `GDXC_BASE_ADDRESS` macro matches what MRC.bin programs as well. Tested on Asrock B85M Pro4 with an i7-4770S (no eDRAM): - Still boots - EDRAMBAR is now enabled with base address of 0xfed80000 - GDXCBAR is still mapped with base address of 0xfed84000 Change-Id: I5538873b30e3d02053e4ba125528d32453ef6572 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16nb/intel/haswell/memmap.h: Define MMIO window sizesAngel Pons
Add defines for the sizes of northbridge MMIO windows and use them where applicable. The macro names have been taken from Broadwell. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I845cba8acbd478cd325d2e364138336d985f9c34 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-16nb/intel/haswell: Update some "Misc ICH" commentsAngel Pons
One of the Memory32Fixed entries covers the TXT private and public spaces, and another covers the TPM registers. Update the comments. Change-Id: I261d74c113fabf1d152964efd8c91de85eba4179 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-10nb/haswell/gma: Add Desktop GT1.5 (HD 4400) Device IDMate Kukri
Change-Id: Idc7c38206b1ddfe486298cd3921fcb762a89ec51 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55243 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-05nb/intel: Don't select VBOOT_SEPARATE_VERSTAGEArthur Heymans
Now the bootblock is not limited to 64K so integrating vboot into the bootblock reduces the binary size. Change-Id: Ic92ecf8068f327a893d20924685ce571752d379f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52787 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-03nb/intel/haswell: Move PEG registers to a separate headerAngel Pons
To keep the "main" haswell.h header short and simple, move PEG register definitions into a separate file, as done with most other registers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ibfca00456115a4a0c861dd6738605214a7d43fd9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51891 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Uniformize include guardsAngel Pons
Remove leading and trailing underscores and change `RAMINIT_H` to be more consistent with other headers. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ie20fcaa0f9393eb0a34054eda53b9bade63cc0d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51890 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-02nb/intel/haswell: Clean up haswell.h headerAngel Pons
Drop unused chipset type macros, remove unnecessary guards and reorganize contents so that headers can be included at the top. Also drop the inclusion from ASL, as it is no longer necessary. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6fcc0d428d0fdbf410bcbeb6ae4809870b7b498f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51889 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26haswell/broadwell: Replace remaining MCHBAR accessorsAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 and Purism Librem 13 v1 remain identical. Change-Id: I74b633fb0b012304b5b4bd943272ed82dcb6f7d5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52468 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-10nb/intel: Replace remaining BAR accessorsAngel Pons
These changes are not reproducible for some reason. Change-Id: I43b445b8af8871db87fb86747db8a35cec75716a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51867 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-10nb/intel/haswell: Use new fixed BAR accessorsAngel Pons
There are some cases in `northbridge_topology_init` where condensing the operation using one macro changes the binary, and have been left as-is. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I59c7d1f8d816b95e86d39dcbf7bc7ce8c34f0770 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51865 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-10nb/intel: Factor out remaining MCHBAR macrosAngel Pons
Except for some formatting differences, the macros are equivalent. Change-Id: I5dc4f115b0873fb96683263ecd152d3d1504647d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51863 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-06nb/intel/haswell: Ensure MCH has acked raminitAngel Pons
Haswell MRC.bin can return zero even when raminit did not complete successfully. When this happens, the memory controller will not have acknowledged raminit: the mc_init_done_ack bit in the MC_INIT_STATE_G register will be zero, and memory accesses will lock up the system. To handle this situation more gracefully, check the mc_init_done_ack bit after running MRC. If the bit is not set, log a fatal error and halt. Tested on Asrock B85M Pro4: - With badly-seated DIMMs, MRC raminit fails and coreboot dies. - After reseating the DIMMs, the board still boots successfully. Change-Id: I144bf827f65cd0be319c44bf3d407ddc116b129d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-28nb/intel/haswell: Replace `DMIBAR64` and `EPBAR64`Angel Pons
While 64-bit writes seem to work properly, there could be unknown side-effects in some cases, e.g. when running in long mode. Since reference code uses two 32-bit writes, follow suit. Change-Id: I48ed3d94c7865b3a3cce52108e99cf1656b57fc2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51855 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-25nb/intel/haswell: Move USB config API into Lynx PointAngel Pons
Both EHCI and xHCI USB controllers are inside the PCH (southbridge). Now that mainboard USB configuration no longer depends on pei_data.h definitions, the API declarations can be placed in southbridge code. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ia21991b225482b33c5bc0dc52884674d301b28ba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-23nb/intel/haswell: Limit mainboard USB config array lengthsAngel Pons
There are at most 14 USB2 ports and 6 USB3 ports on LynxPoint-H, and there are at most 10 USB2 ports and 4 USB3 ports on LynxPoint-LP. Limit the array lengths accordingly to cause build errors on invalid configs. Change-Id: Ieda7a1320d78dbbcb651f1715a87cd1d202a79f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51451 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-23nb/intel/haswell: Use unshifted SPD addresses in mainboardsAngel Pons
It's common to use the raw, unshifted I2C address in coreboot. Adapt mainboards accordingly and perform the shift in MRC glue code. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4e4978772744ea27f4c5a88def60a8ded66520e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51458 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-23nb/intel/haswell: Confine `pei_data` uses to raminit.cAngel Pons
Reorganize romstage.c to resemble sandybridge, and move everything that needs `pei_data` into raminit.c function `perform_raminit`. Barring USB settings, coreboot code no longer depends on pei_data.h definitions. It still depends on MRC, though. For now. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I433f88db5fe7a7533ab6837015647ec31fb45e88 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51449 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19nb/intel/haswell: Consolidate memory-down SPD handlingAngel Pons
Mainboards do not need to know about `pei_data` to tell northbridge code where to find the SPD data. Adjust `mb_get_spd_map` to take a pointer to a struct instead of an array, and update all the mainboards accordingly. Currently, the only board with memory-down in the tree is google/slippy. Mainboard code now obtains the SPD index in `mb_get_spd_map` and adjusts the channel population accordingly. Then, northbridge code reads the SPD file and uses the index that was read in `mb_get_spd_map`, and copies it to channel 0 slot 0 unconditionally. MRC only uses the first position of the `spd_data` array, and ignores the other positions. In coreboot code, `setup_sdram_meminfo` uses the data of each SPD index, so `copy_spd` has to account for this. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Ibaed5c6de9853db6abd08f53bbfda8800d207c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51448 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19mb/google/slippy: Correct memory-down SPD handlingAngel Pons
MRC only uses the SPD data for the first index, and ignores the rest. Moreover, index 1 corresponds to the second DIMM on the first channel, which does not exist on ULT (only one DIMM per channel is supported). Copy the SPD to the first DIMM on channel 1 instead. Adjust northbridge code to retrieve the serial number from the correct SPD data block. Tested on Google Wolf, both channels are still correctly detected. Change-Id: Ic60ff75043e6b96a59baa9e5ebffb712a100a934 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-15sb/intel/lynxpoint: Move S3 check out of `early_pch_init`Angel Pons
Done for consistency with other platforms. This also drops redundant S3 resume logging, as `southbridge_detect_s3_resume` already prints it. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Id96c5aedad80702ebf343dd0a351fbd4e7b1c6c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-15sb/intel/lynxpoint: Replace HPET_ADDRAngel Pons
The `HPET_ADDRESS` Kconfig option has the same value. Use it instead. Change-Id: I268e949d4396aa20e38f719b36cc4e6226efe082 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-10nb/intel/haswell: Finalize northbridge in ramstageAngel Pons
There's no need to finalize the northbridge in SMM. This also makes unification with Broadwell easier. Tested on Asrock B85M Pro4, still boots and registers get locked. Change-Id: I8b2c0d14a79e4fcd2e8985ce58542791cef9b1fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-10nb/intel/haswell/pcie.c: Add missing pre-ASPM initAngel Pons
Add devicetree configuration parameters for mainboard-specific settings, and provide reasonable defaults, which should usually be good enough. This is based on Haswell SA Reference Code version 1.9.0 (Nov 2014). Tested on Asrock B85M Pro4, registers now have the expected values. Change-Id: I0dcdd4ca431c2ae1e62f2719c376d8bdef3054bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47223 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-07nb/intel/haswell: Indent PCI ops with tabsAngel Pons
Change-Id: Ia338ce1a36aa0a14017201c1fc16f84915f55c07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-01nb/intel/haswell: Fix DPR size handlingTim Wawrzynczak
DPR register's size field is given in whole MiB, so correct where it is used to ensure the correct size multiple (KiB vs. MiB) is used with it. Fixes: 5d7c3a4f0 ("nb/intel/haswell/northbridge.c: Correct DPR handling") Change-Id: I3ca388907c61f1e47eab44ae8bc26e0f611fe1e3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51104 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01memory_info.h: Store SMBIOS error correction typeAngel Pons
There are platforms that support error correction types other than single-bit ECC. Extend meminfo to accomodate additional ECC types. It is assumed that `struct memory_info` is packed to save space. Thus, use `uint8_t` instead of an enum type (which are usually 4 bytes wide). Change-Id: I863f8e34c84841d931dfb8d7067af0f12a437e36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50178 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24nb/intel/haswell/northbridge.c: Correct DPR handlingAngel Pons
DPR size is in MiB, but the range boundaries are expressed in KiB. In addition, DPR and TSEG use the same attributes, so unify both regions. Also improve a comment about DPR, since `is special` is uninformative. Change-Id: I4479483e17890b5a4c39165138fa1c5f8215bc84 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46987 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24nb/intel/haswell/pcie.c: remove disable NOPArthur Heymans
The .disable function pointer is only referenced inside set_vga_bridge_bits() and is used to unset VGA decoding on the internal GFX device. Change-Id: I0443a45522b2267e8e23b28e4e2033f25a7ccbf0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51008 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-23nb/intel/haswell: Use cbmem_recovery()Kyösti Mälkki
For consistency with other nb/intel rename variable from wake_from_s3 to s3resume. Change-Id: If94509c4640f34f2783137ae1f94339e6e6cf971 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-18nb/intel/haswell: Drop incorrect MMIO_PAVP_MSG writeAngel Pons
This write was copied from Sandy Bridge. Neither Haswell reference code nor Broadwell perform this write. Therefore, it seems safe to remove it. Change-Id: I8869ff3e66362d9910235c554c3a07e91f479a82 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46994 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16nb/intel: Add missing <types.h>Elyes HAOUAS
Add needed but missing <types.h>. Change-Id: I801be1ca8da4b1641941d5571d2aa298470f407b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50578 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16nb/intel: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: Ica0354fdfe6861551689e3baef94d364d9ded16d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-16vc/google/chromeos: Always use CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
Always allocate RAMOOPS from CBMEM and drop the related static variable CHROMEOS_RAMOOPS_RAM_START. Change-Id: Icfcf2991cb78cc6e9becba14cac77a04d8ada56a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50608 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16nb,soc/intel: Switch to CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
Change-Id: I4ec59cea256a39a94b05cdeb8f914830ac0bd3f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-16nb/intel/sandybridge,haswell: Use chromeos_reserve_ram_oops()Kyösti Mälkki
Communicate the RAMOOPS section via ChromeOS GNVS. Change-Id: I75170e6e34c20db88efa268080d2c38916b31f37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-12nb/intel/haswell/pei_data.h: Define `SPD_LEN`Angel Pons
Change-Id: I34561372bcdd00b1b3e4dcd6be89fa47d2af9b42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50541 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12nb/intel/haswell: Drop unused function declarationAngel Pons
Change-Id: Ica612bcdac373ac013a877bb96b77b2a3f522f7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50540 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell: Drop `mainboard_fill_pei_data`Angel Pons
Use global variables to provide mainboard USB settings, and have the northbridge code copy it into the `pei_data` struct. For now. To minimize diffstat noise, this patch does not reindent the now-global mainboard USB configuration arrays. This is cleaned up in a follow-up. Change-Id: I273c7a6cd46734ae25b95fc11b5e188d63cac32e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50538 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12nb/intel/haswell: Use common {DMI,EP,MCH}BAR accessorsAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3ff4577ce662697cb3d8fb34003217fd6275dd42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-02-11nb/intel/{haswell,sandybridge}/*/mchbar.h: Fix typo in commentElyes HAOUAS
Change-Id: Ie41433ed8fcadec25007c436ec12163d729a2afe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-06intel: Define `RCBA_LENGTH` in Kconfig and use itAngel Pons
Change-Id: Ief81d49f04c1743b2a37633c4a35da9d6ddb0974 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50039 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06soc/intel/broadwell: Conditionally skip PRE_GRAPHICS_DELAYKyösti Mälkki
It was commented that the need for the delay was mainly related to external displays and only with VBIOS execution. Move the delay such that it is done only when we actually need to execute the VBIOS aka option rom. A delay is currently only defined for librem/purism_bdw in its Kconfig. As the description of the issue sounds like it would equally happen on other platforms when VBIOS is involved, promote the Kconfig visible option to global scope. Change-Id: I4503158576f35057373f003586bbf76af4d59b3d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-05intel: Turn `DEFAULT_RCBA` into a Kconfig symbolAngel Pons
Create `FIXED_RCBA_MMIO_BASE` and use it everywhere, except in cases where a pointer cast would be necessary. Instances in Sandy Bridge MRC code were left as-is intentionally, so as not to collide with another cleanup patch train. Tested with BUILD_TIMELESS=1, these boards remain identical: - Asus P8Z77-V LX2 - Packard Bell MS2290 Change-Id: I642958fbd6f02dbf54812d6a75d6bc3087acc77a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50036 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04nb/intel/x/bootblock.c Revert `include <arch/pci_io_cfg.h>`Angel Pons
This partially reverts: - Commit 77d3b655ed - Commit 487c1a24f5 - Commit 875c21f491 - Commit c4d1b47ad9 - Commit b96c358751 - Commit 9cbf26d18e It is intentional to use <device/pci_ops.h> whenever one needs to use PCI config access. The bootblock.c files needing I/O config do not need to be an exception to this. Change-Id: Ifba05717dad404a844618815c5347a05e07a3362 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2021-02-01nb/intel/haswell/bootblock.c: include <arch/pci_io_cfg.h>Elyes HAOUAS
Also rename 'reg' to 'reg32'. Change-Id: Ie8dd238a8f10daad9653f44b3ada329c3ede58fe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-01nb/intel/haswell: Calculate TSEG limit from registersAngel Pons
Done for consistency with other northbridges. Change-Id: I08023809477c1cef0d7762b5e4fde65fadf6a6d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-01nb/intel/haswell: Create RMRR for iGPUAngel Pons
Taken from Broadwell. Change-Id: I246fdc1473bf8949073377d03622026bd3e6aafa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-30nb/intel/haswell: Define and use MMCONF_BUS_NUMBERAngel Pons
Change-Id: I0d6338f763a78895b1ae14d1ab68253851b6c283 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49763 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-29device/Kconfig: Declare MMCONF symbols' type onceAngel Pons
Only specify the type of MMCONF_BASE_ADDRESS and MMCONF_BUS_NUMBER once. Change-Id: Iacd2ed0dae5f1fb6b309124da53b3fa0eef32693 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-27nb/intel/haswell/haswell.h: Do not include `pch.h`Angel Pons
Avoid indirect header inclusion, include `pch.h` where necessary. Change-Id: I6b72976a28ffaad68bcf558c8a13b5c221070522 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-24cpu/intel/haswell: Set C9/C10 vccminAngel Pons
Backport commit ab7586fa26 (broadwell: Set C9/C10 vccmin) to Haswell. Change-Id: I9cddc7dd45e96c6f99327ee2583917bf8bedfbdd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46922 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10cpu/intel/haswell/haswell.h: Align with BroadwellAngel Pons
Sort MSR definitions, move MCHBAR registers to northbridge and relocate C-state latency macros into the header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I3b02f1b1eff522c037e6fc8bb0d831423913da29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46914 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-05nb/intel/haswell/memmap.h: Clean upAngel Pons
Drop unused definition and remove outdated comments. Change-Id: I16033b558fe4c01a9394382dc0c9d0bdc66193d9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01soc/intel/bdw,nb/intel/hsw: convert panel delays to ms representationMichael Niewöhner
For easier review of the switch to a new register struct in the follow-up change, the panel delay times get converted from destination register raw format to milliseconds representation in this change. Formula for conversion of power cycle delay: gpu_panel_power_cycle_delay_ms = (gpu_panel_power_cycle_delay - 1) * 100 Formula for all others: gpu_panel_power_X_delay_ms = gpu_panel_power_X_delay / 10 The register names gain a suffix `_ms` and calculation of the destination register raw values gets done in gma code now. Change-Id: Idf8e076dac2b3048a63a0109263a6e7899f07230 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-30drivers/intel/gma: Include gfx.asl by default for all platforms...Matt DeVillier
which select INTEL_GMA_ACPI. Rework brightness level includes and platform-level asl files to avoid duplicate device definition for GFX0. Include gfx.asl for Skylake/Kabylake, since all other soc/intel/common platforms already do. Adjust mb/51nb/x210 to prevent device redefinition. Some OSes (e.g. Windows, MacOS) require/prefer the ACPI device for the IGD to exist, even if ACPI brightness controls are not utilized. This change adds a GFX0 ACPI device for all boards whose platforms select INTEL_GMA_ACPI without requiring non-functional brightness controls to be added at the board level. Change-Id: Ie71bd5fc7acd926b7ce7da17fbc108670fd453e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-29soc/intel/bdw,nb/intel/hsw: correct mask for panel power cycle delayMichael Niewöhner
Correct the mask for the power cycle delay from 0xff to 0x1f, to represent the actual maximum value according to Intel graphics PRM for Haswell, Volume 2c and Intel graphics PRM for Broadwell, Volume 2c. Change-Id: Ib187f1ca6474325475e5ae4cc1b2ffbce12f10bf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48957 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Do not add PEG devices for LPAngel Pons
Haswell Low Power variants do not have PEG at all. Change-Id: Ia5577104b00bfc8713b54c3c43f8dcdd3bc367df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46791 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Move PEG and CTDP includes downwardsAngel Pons
This change is just to align with Broadwell. Change-Id: I25a481503f5df79502f5ae60c87e7dacb781adad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46790 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Merge `haswell.asl` into `hostbridge.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Google Wolf remains identical. Change-Id: I710581156937b042ba4cf5948c65d0795ad37bbf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46789 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi/hostbridge.asl: Drop unused registersAngel Pons
These are not used anywhere and are not present on Broadwell. Change-Id: I2d1359286ac719cb5daefc955d5c6085e2949c1f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46788 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi/peg.asl: Leverage ASL for DEVENAngel Pons
There's no need to perform manual shifting and masking when ACPI allows one to painlessly describe bitfields of a register. The now-unused DVEN definition will be dropped in a follow-up, alongside other definitions. Change-Id: Iab6972c78c1114c8e3dfee28320ae233421ff154 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46787 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13haswell/lynxpoint: Drop remaining uses of `ISLP` methodAngel Pons
There's no need to dynamically differentiate between traditional and Low Power platforms at runtime, and doing so makes code reuse more complex. Change-Id: Id40f2f5f41db00487af9115eabee8874c2399030 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46785 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04haswell: Add Intel TXT support in romstageAngel Pons
Provide necessary romstage hooks to allow unblocking the memory with SCLEAN. Note that this is slow, and took four minutes with 4 GiB of RAM. Tested on Asrock B85M Pro4 with tboot. When Linux has tboot support compiled in, booting as well as S3 suspend and resume are functional. However, SINIT will TXT reset when the iGPU is enabled, and using a dGPU will result in DMAR-related problems as soon as the IOMMU is enabled. However, SCLEAN seems to hang sometimes. This may be because the AP initialization that reference code does before SCLEAN is missing, but the ACM is still able to unblock the memory. Considering that SCLEAN is critical to recover an otherwise-bricked platform but is hardly ever necessary, prefer having a partially-working solution over none at all. Change-Id: I60beb7d79a30f460bbd5d94e4cba0244318c124e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-04nb/intel/haswell: Place CTDP ASL code in a separate scopeAngel Pons
This is just to align the code with what Broadwell does. Change-Id: I52fb1546d049ca9fa09d0c54304ca1d79f6c4c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46756 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04nb/intel/haswell/acpi: Align with BroadwellAngel Pons
Align cosmetics and move CTDP-specific ASL into its own file. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I476a4e01016caa3658177b0fa8916576f4a5e0e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46755 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-31{cpu,nb}/intel/haswell: Drop unnecessary `UL` suffixAngel Pons
Tested with BUILD_TIMELESS=1, Google Wolf does not change. Change-Id: I029ab0dccbf7b61d641cccf79b491fabf97ab74a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46720 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-25nb/intel/haswell/gma.c: Drop unused ChromeOS includeAngel Pons
Change-Id: I598fe743354ea429d6821b95be7d209a9fcf9f0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46693 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-25nb/intel/haswell/gma.c: Drop unused `set_translation_table` functionAngel Pons
Change-Id: I6c65a5a74a83b8da299245fd6f4a7ae7c1ed30c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46692 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24nb/intel/haswell/gma.c: Drop space after unary `!`Angel Pons
Change-Id: I72f75f3df50af362874818f2c1883a6a1c741087 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46691 Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24nb/intel/haswell/gma.c: Move log message to the right placeAngel Pons
The message was being printed too early, possibly because it was relocated around alongside the rest of the code. Change-Id: I4257f6f0baa1c398aa1df9bd3274458abfaf28a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46690 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24nb/intel/haswell/gma.c: Use `config_of` in `gma_setup_panel`Angel Pons
This is to reduce differences between Haswell and Broadwell. Change-Id: I8d6a8ee02e24bee22f0a7b69098ea8430095ba90 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-10-24nb/intel/haswell/early_init.c: Remove invalid register writesAngel Pons
MRC does not use the value of SSKPD, and will overwrite it with constant values at the end of memory initialisation. Since coreboot does not rely on this particular bit's value, it is safe to drop the writes to set it. MCHBAR register 0x6120 is undocumented. It is nowhere to be found in any documentation or code I have access to; not even for Sandy/Ivy Bridge, the platform where this mysterious register write originally came from. These workarounds were copied from Sandy Bridge, but do not apply to Haswell. They were dropped on Broadwell, so drop them for Haswell too. Tested on Asrock B85M Pro4, still boots. Change-Id: I21d9656a7595d47ac8648c08d223b7cbafd213c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46683 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24nb/intel/haswell/finalize.c: Align with BroadwellAngel Pons
Reorder register writes to match the locking order in Broadwell. Tested on Asrock B85M Pro4, still boots and registers are still locked. Change-Id: Ibe15c2598fabda752c9a54eba6362621e144ad77 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46682 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24nb/intel/haswell/finalize.c: Align MC locking with BroadwellAngel Pons
Broadwell uses a 32-bit or, so also use it on Haswell for consistency. This has no effect because MRC already locks the memory controller down. Tested on Asrock B85M Pro4, still boots and register is still locked. Change-Id: Ida69cd9a95a658c24b4d2558dde88b94c167a3f9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46681 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 03:27:53 +0000