summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-11-19mb/google/octopus: Disable fmap cache for meepPatrick Georgi
By removing this code, we get approximately back to where the board was before the fmap cache feature was added, which is small enough for the Chromium OS default configuration for the board to fit into the 32KB that the bootblock can use on the chipset again. Change-Id: I52c0c30a14929913ded144bf086c12938e9c2699 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge/mrc: Handle P2P disabling via devicetreeNico Huber
Some Sandy Bridge boards disabled the PCI-to-PCI bridge early to avoid probing by the MRC. We can do that for all boards instead, based on the devicetree setting. Change-Id: Ie64774628fde77db2a379bdba6a921a31e52fa0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18sb/intel/bd82x6x: Handle enabling of GbENico Huber
The integrated GbE port is toggled via the Backed-Up Control (BUC) register. We already disable it according to the devicetree setting but never enabled it. This could lead to the confusing situation that it was disabled before (different build, vendor BIOS, etc.) but shouldn't be anymore. As we need a full reset after enabling GbE, do it in early PCH init. Change-Id: I9db3d1923684b938d2c9f5b369b0953570c7fc15 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/intel/dcp847ske: Disable xHCI via devicetreeNico Huber
This is supported by generic PCH code now. Change-Id: Id5d764c97e47cdb08a68d03002ebebd996769914 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/sapphire/pureplatinumh61: Don't write BUC and beyondNico Huber
The BUC register is actually only 8 bits wide and setting bit 5 (disabling GbE) is already done by generic code. Change-Id: I729a2a28f4b0d94eddd070dc89b7341ac0c35e4a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/samsung: Clean up LPC and IOAPIC configurationNico Huber
Don't overwrite the LPC decode config of the generic PCH code, move UART init into bootblock_mainboard_early_init() and don't enable the IOAPIC, which is already done by generic code. Change-Id: I90d090f5bff29174e68981fea3c3f04c666b1d28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/lenovo/s230u: Don't write BUC and beyondNico Huber
The BUC register is actually only 8 bits wide and setting bit 5 (disabling GbE) is already done by generic code. Change-Id: I4b8e14606c319e8bfc48d6757087f28af1bd5dfb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/intel/emeraldlake2: Revise early initNico Huber
Move UART initialization to bootblock_mainboard_early_init() and don't override the generic LPC decode settings. Change-Id: Icdab36ae0324175d3d51a050784b94a53d4b3b7c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/hp/revolve_810_g1: Don't clear BUC and beyondNico Huber
The BUC register is actually 8 bits wide and shouldn't be bluntly cleared. Change-Id: I2ffd2d161005e839e730102b56af4f66efeb551e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/google(sandybrige): Clean up LPC and IOAPIC configurationNico Huber
Only set LPC decode bits that the generic PCH code doesn't set yet. And don't enable the IOAPIC, which is already done by generic code. Change-Id: I9d2f6a9ad3f5d83573e07596f2763edc75f4ee64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/gigabyte/ga-b75m-d3h: Drop useless function-disable settingNico Huber
This bit is already cleared by a reset. Change-Id: Ib71496011c9621476a7327ba309f367c7fa971e4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/{gigabyte,lenovo}: Remove spurious setting of ETR3 bit 16Nico Huber
This bit is used to indicate xHCI routing across reboots. If anything, coreboot should act on it, not set it during boot. ASL code would be supposed to set it. Change-Id: Id14647ac4e591cfa042ca8aad6dfc6ccda35c74a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/compulab/intense_pc: Clean PCH and super-i/o config upNico Huber
The generic PCH code already enables a superset of LPC decoding. Move UART setup to bootblock_mainboard_early_init() where it is expected. Last but not least, remove an odd write to BUCs (RCBA+0x3414) and beyond, as it's an 8-bit register and shouldn't be bluntly zeroed. Change-Id: I24a4ccf6a529460a83f48522d2e05e6ad6614f81 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/asus/p8h61-m*: Drop unnecessary PCH configNico Huber
The generic PCH code already sets up a superset of these decodings. Change-Id: I90bca37c46b89c35f323225fc3c087f1630397e4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/apple/macbookair4_2: Drop unnecessary PCH configNico Huber
mainboard_pch_lpc_setup() and mainboard_late_rcba_config() did 4 things here on top of the generic PCH code: 1. Enabling LPC decoding for gameports. It seems unlikely that anything is using these ports and there is no code to support gameports. 2. Decoding of COM3 instead of COM2. What COM? 3. Premature locking of ETR3/global reset. Bad idea. 4. Disabling the GbE port in BUC. Already done by PCH code. Change-Id: Ie92dbf5c6813435995c4d24ed807ffc8d125953a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18nb/intel/sandybridge: Set up console in bootblockArthur Heymans
Change-Id: Ia041b63201b2a4a2fe6ab11e3497c460f88061d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between romstage and bootblock. LPC setup and BAR initialization is now done twice. The rationale is that the romstage should not depend too much on the bootblock, since it can reside in a RO fmap region. Enabling the console will be done in a followup patch. Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18sb/intel/bd82x6x: Make the pch_enable_lpc hook optionalArthur Heymans
This also changes the name to mainboard_pch_lpc_setup to better reflect that it is an optional mainboard hook. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_rcba_config hook optionalArthur Heymans
This also changes the name to mainboard_late_rcba_config to better reflect what it does. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_early_init hook optionalArthur Heymans
This adds an empty weakly linked default. The rationale behind this change is that without the callback some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I62c8010aa81fc45d208e9293feb2f45b45f34a82 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-17mb/{i945,ich7}: Remove redundant write on V0CTLElyes HAOUAS
RCBA32(V0CTL)= 0x80000001 already done inhere i945/early_init.c Change-Id: Ia775f4e6158a217b48629d289845537e7ccf5e79 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
Setting GPP_A10 to NC now that older boards are deprecated and this GPIO is not in use anymore. BUG=b:142056166 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16mb/{kontron/968lcd-m,roda/rk886ex}: select non-SPIArthur Heymans
These mainboard don't feature a SPI flash. The SPI init code will timeout on probing for a SPI flash which takes a lot of time. Not including all SPI drivers also lightens the uncompressed ramstage of about 17K or 7K compressed. Change-Id: Icc7bf62d56fc2ef38854402e658830b8d59c737f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36870 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/x4x: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between things done in bootblock and romstage like setting BARs. Change-Id: Icd1de34c3b5c0f36f2a5249116d1829ee3956f38 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36759 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/i945: Initialize console in bootblockArthur Heymans
Change-Id: Ic6ea158714998195614a63ee46a057f405de5616 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-15nb/intel/i945: Move boilerplate romstage to a common locationArthur Heymans
This adds callbacks for mainboard specific init. Change-Id: Ib67bc492a7b7f02f9b57a52fd6730e16501b436e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36787 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/x4x: Move boilerplate romstage to a common locationArthur Heymans
This adds 3 mb romstage callbacks: - void mb_lpc_setup(void) to be used to set up the superio - void mb_get_spd_map(u8 spd_map[4]) to get I2C addresses of SPDs - (optional)mb_pre_raminit_setup(int s3_resume) to set up mainboard specific things before the raminit. Change-Id: Ic3b838856b3076ed05eeeea7c0656c2078462272 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36758 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Select HAVE_IFD_BIN and HAVE_ME_BINFrans Hendriks
Add IFD and ME binary to generate complete SPI image. BUG=N/A TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701 Change-Id: I9370bf9f2bba8887988bc6484524f6cf53bed8db Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34448 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
Add a new Kukui follower 'kakadu'. BUG=None TEST=make # select kakadu Change-Id: I9f25ce90285828c43435e45d9361ee7128d407fa Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36848 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: Add SX9310 sensor to devicetreeSheng-Liang Pan
Add semtech SAR sensor. BUG=b:143449140 BRANCH=octopus TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address. Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: support LTE power sequenceSheng-Liang Pan
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Remove logo from verify list when disabledWim Vervoorn
Remove the logo.bmp file from the verify list when FSP1_1_DISPLAY_LOGO is not set. BUG=N/A TEST=build Change-Id: I87eac0b3cbe9450d5623b5331d8de096f140b595 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36853 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Changed the order of the verify_listsWim Vervoorn
Changed the order of the verify lists and updated the comments to reflect the order of execution. This makes the list easier to understand and maintain. BUG=N/A TEST=tested on fbg1701 Change-Id: Ia656fbf07e5d42bafd328eaba69b660e5a1e4f1a Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36817 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Stagenames now use CONFIG_CBFS_PREFIXWim Vervoorn
Change from hardcoded "fallback/*" to using CONFIG_CBFS_PREFIX. BUG=N/A TEST=tested on fbg1701 Change-Id: Ie728d01ebb93edd88516e91528ecaaa3f139b7a9 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Only verify the publickey when neededWim Vervoorn
The public key should only be validated if the manifest is signed. BUG=N/A TEST=testedd on fbg1701 Change-Id: I703ed442e0b1926859f593ce9ca84133013224ea Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Removed unused include fileWim Vervoorn
Removed unused include file. BUG=N/A TEST=build Change-Id: I040b695a893b51de06f9658abdca8867727f053d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Correct the postcar_verify_listWim Vervoorn
The postcar_verify_list should contain the items that should be verified before the postcar stage is started. BUG=N/A TEST=build Change-Id: I328858e4803873fed6d47313def5e7b9a434e8ad Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Align handling of bootblock and publickeyWim Vervoorn
The bootblock measurement was handled using the romstage_verify_list() and the public_key in the mb_log_list. This is confusing as these are both read-only items that should be handled in the same way. Both will be handled in the romstage_verify_list(). BUG=N/A TEST=tested on fbg1701 Change-Id: If05198deec85188f39a221a8b755798755afa5bb Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15vboot: use vboot persistent contextJoel Kitching
vb2_context object is now stored on the workbuf as part of vb2_shared_data. Use vboot's new API functions vb2api_init and vb2api_relocate to create and move the workbuf. BUG=b:124141368, chromium:994060 TEST=Build locally BRANCH=none Change-Id: I051be1e47bf79b15a1689d49a5d4c031e9363dfa Signed-off-by: Joel Kitching <kitching@google.com> Also-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1902339 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-11-14soc/qualcomm: Link cbmem.c only in romstageArthur Heymans
Change-Id: I008fcca024fecf462c4b550b8dedbf4b06e491b8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36368 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14soc/sifive/fu540: Support booting from SD cardXiang Wang
Change-Id: I18948d31c0bf0bf9d641480a35fc710b9ee8ae84 Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-14{drivers,mainboard}: Move FSP logo support to fsp1_1Frans Hendriks
Support to display a logo using FSP 1.1 currently resides in facebook fbg1701 mainboard. The related support is moved to drivers/intel/fsp1_1 and used by the Facebook fbg1701 mainboard. The storage for the uncompressed logo is changed. We don't use .bss any longer as the logo doesn't need to be available at runtime. BUG=N/A TEST=booting Facebook fbg1701 Change-Id: I276e6e14fc87d0b95fe5fdf7b617afd26769de79 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-14mb/*/*(ich7/x4x): Use common early southbridge initArthur Heymans
One functional change is that southbridge GPIO init is moved after console init. Change-Id: I53e6f177aadcdaa8c45593e0a8098e8d3c400d27 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36757 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14sb/intel/i82801jx: Move early sb init to a common placeArthur Heymans
Setting southbridge GPIO is now done after console init, which should be fine. This code is partially copied from i82801ix. Change-Id: I51dd30de4a82898b0f1d8c4308e8de4a00d1b7aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36756 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14sb/intel/i82801gx: Add common early codeArthur Heymans
Remove some of the code duplication on i82801gx. x4x boards are left untouched for now since that northbridge also supports i82801jx. The order of some things has changed: - on i945 early_ich7_init is now done before the raminit - enabling the IOAPIC is done before the raminit Change-Id: Ie39549938891e17667a8819b49a78b9c71c8ec9e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36754 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch: clean manufacturing information in spdWisley Chen
Clean the vendor/manufacturing information in 16G_3200_4bg spd to become generic spd. BUG=None TEST=emerge-hatch coreboot Change-Id: I163dc4631a6b71efd36c75cfe1fc759040113387 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36810 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
1. ram id 8: 16G 2666 2 bank groups memory 2. ram id 9: 16G 3200 4 bank groups memory BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: Ic63d911458b59de11c12ce776f6f7d04b1eb3b6c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36667 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
Set GPP_C4 default to low to fix leakage voltage problem on touchscreen during power on. BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure touchscreen works. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ie9197192c9d6dfb30c10559990c6010b1b2d3a45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36670 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12mainboard/google/hatch: Create helios_diskswap variantAlexis Savery
Created helios_diskswap as a variant of helios (hatch variant). BUG=b:143378037 BRANCH=None TEST=none Change-Id: I6536b3908ec569e1ac42ea7c5be85701012ab177 Signed-off-by: Alexis Savery <asavery@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-12/mb/google/hatch: add new memory config supportWisley Chen
1. Add 16G 2666 2 bank group 2. Add 16G 3200 4 bank group BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: I04810091ef2bf8ec1bd306ad141a70436638eac8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-11-12src/mainboard/siemens: Use PTN3460 chip driverUwe Poeche
This patch replaces and cleans up the redundant PTN3460 driver files in /mainboard/siemens directories by using the now available driver in src/drivers/i2c/ptn3460 and providing mainboard specific functions to the driver. TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...). Change-Id: I976a502e7176a356bab772758250db3cdff529b9 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36643 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-12sb/intel/i82801jx: Add common code for LPC decodeArthur Heymans
Change-Id: Id706da33f06ceeec39ea50301130770226f0474e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-12sb/intel/i82801gx: Add common LPC decode codeArthur Heymans
Generic LPC decode ranges can now be set from the devicetree. Change-Id: I1065ec770ad3a743286859efa39dca09ccb733a1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-12mb/siemens/mc_apl6: Enable VT-d featureWerner Zeh
This mainboard needs VT-d to be enabled. Do so in devicetree. Change-Id: I9f2f733163be019ac329660d7633b48c5d7896f1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-12mb/google/kukui: Add new configs 'damu' and 'kappa'Hung-Te Lin
New boards introduced to Kukui family. BUG=None TEST=make # select damu and kappa Change-Id: I7154aeee921114b7d12bf586adca250df19a3883 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-12ec/lenovo/h8: Make dock init in ramstage fully mainboard-specificBill XIE
Discussed in CB:36093, in the past many lenovo boards need to declare an empty h8_mainboard_init_dock() to satisfy h8.c. Now the confusing H8_DOCK_EARLY_INIT might be retired, and if a mainboard needs dock init (done with h8_mainboard_init_dock() in the past) in ramstage, (discussed in CB:4294 where H8_DOCK_EARLY_INIT is introduced) it can just do it in its own chip_ops.enable_dev function. Tested on X200. Testing on other affected targets may be necessary. Change-Id: I5737406d1f6cb6e91b2e2fa349a206a3dba988d1 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-12mb/*: Fix default fmap with VBOOT_SLOTS_RW_A enabledPatrick Rudolph
Don't select the VBOOT fmap as default if VBOOT is disabled. Fixes a regression introduced by f8251b98 "mb/emulation/qemu: Add VBOOT support" where the default Kconfig settings wouldn't allow the qemu boards to run. Also fix the Supermicro x11-lga1151 series boards. Change-Id: I90414e2cc7e4c4a6ad67014bd4a7f9c8ff4da389 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/{google/fizz,razer/blade_stealth_kbl}: Add missing include ↵Elyes HAOUAS
<console/console.h> Change-Id: Ia4e496d359036591131c1ec0243d64c58823ca63 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-11mb/asus/p5ql-em: Fix S3 resumeArthur Heymans
The superio VSBGATE# functionality needs to be enabled for ram to be powered during S3. Change-Id: I7b827e025de7d5b53c587872238a411fc9c2e762 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36709 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/siemens/mc_apl6: Add TPM to devicetreeWerner Zeh
The TPM chip needs to be added to the devicetree so that the ACPI tables will be generated for it. These ACPI table entry is used by the OS to get the location of the TPM chip. Change-Id: Ic40d1cf236dd849f04f088808d94b6dd81e3238a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controllerWerner Zeh
This mainboard variant uses SD-card and not eMMC. Therefore eMMC controller is disabled while SDHCI is enabled. Change-Id: I40b314905730b5d74c674d2251f8a4e5c807805f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36676 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridgeWerner Zeh
On this mainboard variant the PCIe-2-PCI bridge is used a bit different. Adjust the switched off clock lines to match the mainboard configuration. Change-Id: I16f3b6eed0948c8201baecdfbb8052c6c1c335c8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable VBOOT per defaultWerner Zeh
mc_apl6 uses VBOOT scheme so enable it as default. Change-Id: I341180f3815ff9f3b2db801d9d989119a2585b03 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Add new mainboard based on mc_apl3Werner Zeh
This patch adds a new mainboard variant called mc_apl6 which is based on mc_apl3. So far only the names have been adjusted with no further changes. Following commits will introduce the needed changes for this mainboard variant. Change-Id: Ic935f6cc1f037947b2c167696d40da8309e4d4f0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11src/mb: Remove redundant message befor 'system_reset()'Elyes HAOUAS
Change-Id: Id5a6b7c731b65aafbb88a7c52a1f434dbab41f4a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36694 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/{x4x}: Remove unused 'include <northbridge/intel/x4x/iomap.h>'Elyes HAOUAS
Change-Id: I82f1d4325ea87585137fa81567aa82b80454c704 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
With the 0.71586+ Goodix FW, we can reduce the reset delay from 500ms to 120ms. We should do the change in coreboot device tree after we ensure Helios DVT build is flashed with 0.71586+ Goodix FW. BUG=b:142316026 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I000ee4ea84c598b437992f1000f6e5b561cae605 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2019-11-10drivers/intel/fsp1_1: Fake microcode update to make FSP happyArthur Heymans
The FSP loops through microcode updates and at the end checks if the microcode revision is not zero. Since we update the microcode before loading FSP, this is the case and a fake microcode can be passed to the FSP. The advantage is that the Kconfig symbols to specify the location and the size of the microcode blob can be dropped. Change-Id: I63cfb7b19e9795da85566733fb4c1ff989e85d03 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36255 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09arch/x86: Replace some __SMM__ guardsKyösti Mälkki
We generally do not guard source in attempts to reduce the final object sizes, but rely on garbage collection. Most of the __unused attributes inserted here will be removed when remaining __SIMPLE_DEVICE__ guards can be removed. Change-Id: I2440931fab4f41d7e8249c082e6c9b5a9cd0ef13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09ELOG: Introduce elog_gsmi variantsKyösti Mälkki
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate. Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09mb/asus/p5ql-em: Add mainboardArthur Heymans
Tested, working: - First dimm slot of each channel - USB, SATA - CPU FSB at 800, 1067 and 1333MHz - Libgfxinit on DVI and VGA slot - PCI slot - Realtek NIC (configure MAC address in Kconfig) - PEG slot - PS2 keyboard Tested, not working: - second dimm slot for each channel. Those are hooked up to the second rank of the channel, instead of rank 3 and 4. The raminit does not support such setups. Untested: - PCIe x1 slot, likely works fine - HDMI Tested using SeaBIOS 1.12, Linux 4.19. Change-Id: I88fe9c66dae079cd7eedcc9736c5922defbc0e5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-08google/stout: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Ie0a1349ab460142dc2744155a422b5ee22528e4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08google/parrot: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Idf7b04edc3fce147f7857691ce7d6a0ce03f43fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08arch/x86: Drop some __SMM__ guardsKyösti Mälkki
Change-Id: I64063bbae5b44f1f24566609a7f770c6d5f69fac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-08mb/facebook/fbg1701: Remove some preprocessor guardsKyösti Mälkki
Change-Id: Ia7289fa8337e1a93e620a52a67ca8cbdd78a66bc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
Akemi platform dosen't support WWAN device and unused USB2 port 3, 4, 5, 7, 8 and USB3 port 3, 4, 5 so close them. BUG=None TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I7eff4da77caea7d4fe46597320be134d34d78a22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-07hatch: Create puff variantEdward O'Callaghan
Includes: - gpio mappings, - overridetree.cb, - kconfig adjustments for reading spd over smbus. V.2: Rework devicetree with comments and drop some useless gpio maps. BUG=b:141658115 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I6449c4fcc1df702ed4f0d35afd7b0981e4c72323 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-11-07mainboard/google: Allow Hatch variants to read SPD data over SMBusEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. This romstage variant allows for reading the SPD data over SMBus. V.2: Dispence with memcpy(). V.3: Revert back to previous patch with memcpy(). V.4: Rewrite again to avoid memcpy(). BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I3516a46b91840a9f6d1f4cffb2553d939d79cda2 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36449 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
The previous values do not affect the touchscreen function. But, the previous values cause the power leakage in S0ix. from b/142368161: 1. Modify GPP_D: The specification define T1 >= 10ms. We change it to 12ms for a safety and low impact value in our mind. Enable pin as GPP_D9 is define to be AVDD in specification. Set it to 10ms to make it to be the final one to pull low during power off sequence . 2. Add GPP_C4: If we set stop_off_delay_ms to be 1. The true T4 we got will be 300us . Set stop_off_delay_ms to be 2 . True T4 will be 500us . So we change it to 5 to be a low impact value in our mind according to the true T4 value we got . BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-bootimage ./util/abuild/abuild -p none -t google/hatch -x -a Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86c920ff1d5c0b510adde8a37f60003072d5f4e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Override smbios enclosure type for drallionMathew King
Drallion can be either a clamshell or convertible depending on the presence of the 360 sensor board. Set the smbios type 3 enclosure type to either CONVERTIBLE or LAPTOP accordingly. BUG=b:143701965 TEST='dmidecode -t 3' Type = Convertible with sensor board connected Type = Laptop with sensor board disconnected Change-Id: I766e9a4b22a490bc8252670a06504437e82f72d5 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36512 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Consolidate 360 sensor board detectionMathew King
Create a single function to determine if the 360 sensor board is present on a device. BUG=b:143701965 TEST='emerge-drallion coreboot' Change-Id: I4100a9fdcfe6b7134fb238cb291cb5b0af4ec169 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-11-06security/vboot/Kconfig: Remove unused symbolsArthur Heymans
Change-Id: I417a2ff45b4a8f5bc800459a64f1c5a861fcd3d5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-06mb/emulation/qemu: Add VBOOT supportPatrick Rudolph
Add VBOOT support for testing purposes. Add a 16 MiB FMAP containing RO + RW_A. Tested on qemu. Change-Id: I4039d77de44ade68c7bc1f8b4b0aa21387c50f8a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-06mainboard/google: Rework Hatch so that SPD in CBFS is optionalEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ie1637d08cdd85bc8d7c3b6f2d6f386d0e0c6589b Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
Update thermal threshold settings for TSR3 sensor. There is an issue fan is always running, even during system idle state. This change fixes this issue and fan starts only when it breaches the temperature threshold. BRANCH=None BUG=b:143861559 TEST=Built and tested on Helios system Change-Id: Ia417f8c51442005cc8c2251c188cebc197e0a773 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36609 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05vendorcode/eltan/security: Align mboot with coreboot tpmWim Vervoorn
Align the eltan mboot support with coreboot tpm support to limit the amount of custom code. We now only support SHA256 pcrs, only single a single digest will be handled in a call. The pcr invalidation has been changed fixed values are now loaded while the correct algortihm is selected. BUG=N/A TEST=tested on fbg1701 Change-Id: Id11389ca90c1e6121293353402a2dd464a2e6727 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-05mb/supermicro/x11ssh-tf: Disable i8042 supportPatrick Rudolph
Even though the vendor firmware enables the i8042 I/O port, it doesn't feed valid data to those, but instead uses USB HID devices. Disable the KBC port in SuperI/O and report no KCS port using FADT. Fixes: * Fixes error message in Linux that i8042 keyboard couldn't be enabled. Tested on Supermicro X11SSH-TF: The virtual remote managment console still works. Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-05mb/google/kahlee/treeya: Update STAPM parameters for TreeyaPeichao Wang
Tune stapm percentage from 80 to 68 and time from 250 second to 90 second make them meet Lenovo temperature spec. BUG=b:143859022 TEST=build firmware and install it to DUT and run fishbowl 1000, check temperature whether meets spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I254140c9d242ed918b3b689d4fb4a1d0e871cd55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-11-04mb/asrock/h110m/devicetree: fix VR config infoMaxim Polyakov
Removes unnecessary information about the Ring Sliced VR configuration from another board with FSP1.1 (which is no longer supported). Change-Id: Ia2b90d9ede782852c2127da972333bada378b217 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04mb/asrock/h110m: use SSDT generator for SuperIOMaxim Polyakov
Modifies the device tree to use the ACPI SSDT generator[1] for NCT6791D SuperIO, dropping the need to include code from the superio.asl, which was inherited from another chip (NCT6776) and required fixes. SSDT gen support for Nuvoton NCT6791D chip was added in the previous patch [2]. [1] https://review.coreboot.org/c/coreboot/+/33033 [2] https://review.coreboot.org/c/coreboot/+/36379 Change-Id: I57b67d10968e5e035536bcb0d8329ce09d50194b Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04google/auron: hook up libgfxinitMatt DeVillier
Internal/external displays functional on all variants other than Samus. Unable to verify external outputs on Samus (USB-C using DP/HDMI adapter). Test: build/boot lulu variant with libgfxinit, verify internal/ external displays functional prior to OS display driver loaded. Both linear framebuffer and scaled VGA text modes functional. Change-Id: I867b2604861ebae02936e7fc0e7230a6adcb2d20 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
Update emmc DLL values for Kindred BUG=b:131401116 BRANCH=none TEST=Boot to OS 100 times on Kindred EVT Change-Id: Ibd840b31bb0e5a742495758de55b532e6c3946aa Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-11-04mb/*/*/others: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Iabfd680fdb50534e6b9f6cfdecda9f8de0f8a610 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04sb/intel/lynxpoint: Use sb/intel/common/platform.aslArthur Heymans
Change-Id: I86260a374a3f60f16dc73573e7989f0a4ffec818 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/*/*{i82801gx}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Ifc0799d26394a525d764fb4ffc096b48060ee22f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-04include: Remove EC_EVENT_* from elog.hYu-Ping Wu
All of the EC_EVENT_* macros can be replaced with the EC_HOST_EVENT_* macros defined in ec_commands.h, which is synchronized from Chromium OS ec repository. BRANCH=none BUG=none TEST=emerge-kukui coreboot Change-Id: I12c7101866d8365b87a6483a160187cc9526010a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-04mb/supermicro/x11-lga1151-series: drop console guard in bootblockMichael Niewöhner
To make debugging possible in a fallback setup, the serial console must be set up in bootblock, thus drop the guard. Change-Id: If0dd3c03ba52b4936eb234e6b2b61bb5ce044fcd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36602 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/supermicro/x11-lga1151-series: use new console delay Kconfig optionMichael Niewöhner
This replaces the hardcoded delay by the new Kconfig option. Change-Id: I8bf4ef7ad9beea7b3dc22e1567623a423597eff9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-04arch/ppc64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This avoids the need for a platform specific implementation of cbmem_top. HOW TO TEST? There is no serial console for the qemu target... Change-Id: I68aa09a46786eba37c009c5f08642445805b08eb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 01:12:46 +0000