summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2024-09-07mb/google/dedede/var/awasuki: Update touchscreen power sequenceTongtong Pan
Reduce resume time. BUG=b:361728839 TEST=emerge-dedede coreboot chromeos-bootimage & test touchscreen function on awasuki DUT Change-Id: I32b2b1c709ecab964a0e449d416c5d0ee2c1d97d Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84196 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-06mb/starlabs/byte_adl: Add Alder Lake N Byte Mk IISean Rhodes
Tested using `edk2` from `github.com/starlabsltd/edk2/tree/uefipayload_vs`: * Windows 11 * Ubuntu 22.04 * Manjaro 22 No known issues. https://starlabs.systems/pages/byte-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Idff2d883a8c29f0fee9d633708aac92061a45132 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-09-06mb/google/brask/var/bujia: Add PSYS settingShon
According to the Intel OPS spec, the DC power from display is 12~19V@8A max. It can't set PsysPmax by unknown voltage, so get voltage by ec command "ectool adcread 4" then calculate PsysPmax value. The OPS display can supply 90W power, configure psys_pl2 to limit the system power to 90W. BUG=b:329037849 BRANCH=firmware-brya-14505.B TEST= USE="fw_debug" LOCALES="en" emerge-brask chromeos-bmpblk intel-rplfsp intel-adlfsp coreboot chromeos-bootimage Check adcread value by ectool adcread 4. If get 19540, PsysPmax should be 19540 * 8000 ~= 156 W. Check FSP debug log have the following message. PsysPmax = 156W Change-Id: Ic6e9c6ce9f3179c7d63c1169695fbc23188456dd Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-09-06mb/google/nissa/var/yavilla: Add 1.2V enable pin in VCMWisley Chen
Add control for the 1.2V enable pin in VCM to comply the mipi camera power sequence. 2.8V enable --> 1.2V enable --> reset BUG=b:362386165 TEST=Run ITS test Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-06mb/google/brox/var/lotso: remove unused cam enable_gpioJian Tong
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-06mb/google/brox/var/lotso: disable RTS5227 PCIE L0s supportJian Tong
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1. lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled. BUG=b:359409425 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-06mb/google/brox/variants/brox: Update PL1 MinSumeet Pawnikar
Update PL1 Min value from 6W to 15W based on the brox thermal cooling capacity and hardware design. BUG=None BRANCH=None TEST=Build and boot on brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-05mb/google/nissa/var/riven: Update GPIO pins for 3rd dmic supportDavid Wu
When world-facing camera is absent, coreboot need to enable GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support BUG=b:333973512 TEST=Boot google/riven to OS and verify 3rd dmic working properly. Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-05mb/google/brox/var/jubilant: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Jubilant FW image. Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-04mb/google/brox/jubilant: Tune I2C timingRen Kuo
Tune I2C2 timing: Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us" BUG=b:362685374 TEST= Build jubilant firmware Measure the i2c signal on jubilant to meet spec: I2C2 THIGH from 0.494 us to 0.76 us Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-04tree: Use boolean for emmc_enable_hs400_modeElyes Haouas
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_package_c_state_demotionElyes Haouas
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_c1_state_auto_demotionElyes Haouas
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for skip_ext_gfx_scanElyes Haouas
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-09-03mb/google/brox/jubilant: Generate RAM IDsRen Kuo
Generate RAM IDs of lp5 memory: 1)Hyinx 4GB*4 H58G56BK8BX068 2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT BUG=None TEST=Run part_id_gen tool and check the generated files. Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-09-03mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13Ren Kuo
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT. The design change to follow the brox's GPE0 routing, and the FP wake source can be routed. BUG=b:363166664 TEST= Build jubilant firmware Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/lattepanda: Add support for LattePanda MuKunYi Chen
Add initial support for the LattePanda Mu board, which features: - Intel Alder Lake-N N100 processor - Samsung K3LK7K70BM-BGCP, 8GB LPDDR5 memory - Samsung KLMCG2UCTA-B041, 64GB eMMC storage - SO-DIMM 260-pin connector for function expansion This commit includes: - Basic board configuration - Memory initialization - Essential I/O setup - Used UEFITool NE alpha 68 (Nov 4 2023) to extract data.vbt file from original BIOS - BIOS download link: https://github.com/LattePandaTeam/LattePanda-Mu located at "./Softwares/BIOS/DFLT/LP-BS-S70NC1R200-SR-A.bin.zip" Test Environment: - Carrier Board: Lite - Payload: mrchromebox/edk2 - EDK2 Version: uefipayload_202309 Test result Passed: - Windows 11 boot from eMMC - Install Ubuntu 24.04 on NVMe SSD - Ubuntu 24.04 boot from NVMe SSD - USB 3.0/2.0 functionality - Realtek RTL8111H-CG-RH Ethernet - HDMI Display - Audio over HDMI work in Ubuntu 24.04 Known Issues: - S3 sleep mode non-functional - Power-on after shutdown requires power removal - SuperIO UART not detected in Windows 11 - Audio over HDMI not work in Windows 11 - Windows 11 BSOD occurs with NVMe SSD installed: - Stop code: Machine Check Exception - NVMe SSD not working on Windows 11, except when: - KDNet Debugging enabled on NIC during boot - SSD becomes functional in this scenario Change-Id: I79696bdd837a221860b32f54629212c3346dca66 Signed-off-by: KunYi Chen <kunyi.chen@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-09-02mb/google/cherry: Complete PCIe reset in romstageYidi Lin
De-assert PERST# at romstage to reduce the waiting time in ramstage. Before ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries) ``` After ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST# [DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries) ``` BUG=none TEST=boot from NVMe Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118 Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-09-02mb/google/zork: Ensure eSPI GPIOs programmed w/o vbootMatt DeVillier
On the non-vboot boot path, eSPI is configured as part of fch_pre_init(), and we need to ensure that the mainboard sets the eSPI GPIOs properly before the common SoC code performs eSPI init. Use the mb_set_up_early_espi() function to set the eSPI GPIOs at the correct time. TEST=build/boot google/zork (morphius), verify keyboard functional. Change-Id: I03efe6def37a018c3de410523be21bf008174e94 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84148 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/zork: Ensure early GPIOs programmed w/o vbootMatt DeVillier
Now that zork can boot without vboot, ensure that the GPIOs set in verstage are programmed in bootblock on the non-vboot path. The eSPI GPIOs will be set in a subsequent patch using mb_set_up_early_espi() since setting them in bootblock_mainboard_early_init() would be too late given when the SoC eSPI init takes place. TEST=build/boot google/zork (morphius) w/o vboot Change-Id: I0bb49678b2d913c447d5bc761a6f0e00fca6334f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-09-02mb/google/nissa/var/teliks: Add fw_config fields for rtl8852becengjianeng
Add a new fw config field for wifi category as WIFI_6_8852, which is PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port as well as bluetooth port. BUG=b:356434907 BRANCH=NONE TEST=Verified Wifi6 module detection Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/nissa/var/teliks: Force audio mute to avoid screen flickcengjianeng
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG=b:360243615 BRANCH=firmware-nissa-15217.B TEST:Verfied on Teliks and cannot reproduce the issue Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
2024-09-02mb/google/brox: Remove ACPI Power Resource for Bluetooth deviceKarthikeyan Ramasubramanian
Bluetooth driver in kernel requires reset-gpio in current resource settings (_CRS) and device specific data (_DSD) ACPI objects. Hence remove ACPI Power Resource for Bluetooth device so that the concerned ACPI objects get populated. BUG=b:362817900 TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and _DSP ACPI objects are filled in the SSDT with the required data. Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x004D } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS10, Zero, Zero, One } } } }) Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-09-02mb/google/brox/jubilant: Update dptf settingsRen Kuo
Update dptf settings from thermal design: 1) Remove fan control and active policy, since fan is controlled by EC. 2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger 3) Update Pl2 min&max values BUG=None TEST= Build jubilant firmware Generate and check ACPI SSDT.dsl $ cat /sys/firmware/acpi/tables/SSDT > SSDT $ iasl -d SSDT Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-02mb/cwwk/adl/devicetree: enable all USB portsFelix Held
The cw-al-4l-v1.0 mainboard has two USB2 ports on a 2x5 pin header on the mainboard and likely also routes one USB2 port to the m.2 E key slot which is typically used for Bluetooth support when an E key m.2 WIFI + Bluetooth card is installed. This is untested, since I only have the cw-al-4l-v2.0 mainboard, but from looking at the documentation of the version 1 and looking at how things are done on the version 2 this should be correct. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7059a3f2d9cde0086382a4484c09d5ef33dc906d Reviewed-on: https://review.coreboot.org/c/coreboot/+/83910 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-09-02mb/google/brya: Add romstage early graphics for trulo baseboardSubrata Banik
1) Add all required changes for eSOL support. 2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo. The CSOT (MNC207QS1-1) panel is used for the devicetree. BUG=b:362895813 TEST=On-screen text message seen during MRC training on Trulo SKU1. MRC: no data in 'RW_MRC_CACHE' bootmode is set to: 0 DP PHY mode status not complete DP PHY mode status not complete DP PHY mode status not complete ... Informing user on-display of memory training Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2024-09-02mb/google/brox/var/lotso: Update verb tableJian Tong
Update verb table provided by Realtek on 20240710. Restults: SNR > 90 (spec>=90). BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-01tree: Use boolean for s0ix_enableElyes Haouas
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-09-01tree: Use eist_enable as bool for newly merged filesElyes Haouas
Change-Id: Icc01852dc5bd04cfa151e8fa7c5bcc160ed978c6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84156 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-30mb/qemu-{i440fx,q35}: reduce default ROM size to 8 MiBKrystian Hebel
By default, QEMU bails when trying to use bigger images mounted with '-drive if=pflash', which is required to make use of writable flash introduced in CB:82555. This changes both default size in Kconfig as well as FMAP layouts. Since QEMU 5.0.0 it is possible to change the limit of firmware size with `max-fw-size` machine configuration option, up to 16 MiB, as bigger sizes would overlap with IO APIC memory range. Default is still 8 MiB, so it makes sense to have identical default in coreboot. Error thrown by QEMU when trying to use too big ROM: qemu-system-x86_64: combined size of system firmware exceeds 8388608 bytes Change-Id: If36cb754a8e75e23bce49ff568dd88e5db279bb8 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82639 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2024-08-30mb/qemu-q35/smihandler.c: add support for SMIs on QEMUKrystian Hebel
qemu-system-x86_64 uses AMD64 SMM save state format, despite emulating Intel chipset. In addition, even though it implements SMI_STS register, QEMU never sets any bits in it. As there is little emulated hardware that can be generating SMI, assume that all SMIs come from APM. This source is used e.g. to disable ACPI (which wasn't working until now on QEMU) and SMMSTORE. Tested by invoking SMMSTORE commands from the payload with SMM logging. Change-Id: I2fc7b74bdc13be8d76bc536283ab5a14fffec45f Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82558 Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-29mb/google/rauru: Reset USB hub in bootblockYidi Lin
We have to reset the USB hub as early as possible. Otherwise the USB3 hub may not be usable in the payload. This design has been introduced since Cherry. TEST=build pass. BUG=b:317009620 Change-Id: Iea793b4b04bd009d0354e2331604bccf30466a23 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84024 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-29mb/google/rauru: Setup USB host in ramstageMingjin Ge
Add usb host function support. TEST=read usb data successfully. BUG=b:317009620 Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com> Change-Id: I5d081ff3e7367b87fab5ebdcb148c9005ab583f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-29mb/google/brya/var/nova: Configure scaler I2C GPIOsKenneth Chan
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL). BUG=b:358439747 TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C. Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-28mb/google/brox/var/lotso: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Lotso FW image. Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-28mb/google/brox: Disable Thunderbolt deviceKarthikeyan Ramasubramanian
This feature is not required in Brox devices. Hence disable the concerned device. BUG=None TEST=Build Brox firmware and boot to OS. Ensure that the concerned device is disabled in the OS. Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093 Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
2024-08-28mb/qemu-i440fx/rom_media: Use MEM_REGION_DEV_INIT() for boot_devNico Huber
`boot_dev` can be const, and we can use MEM_REGION_DEV_INIT() as all the values are known at compile time. Change-Id: Icd3757ba4b5e8bfbee9e9c9d18bf0ee71520a8ac Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84089 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-28mb/google/nissa/var/anraggar: Force audio mute to avoid screen flickSimon Yang
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG:b=357764688 BRANCH=firmware-nissa-15217.B TEST:Verfied on Anraggar and cannot reproduce the issue Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28mb/google/nissa/var/nivviks: Prevent camera LED blinking during bootSowmya V
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Build and boot nivviks. Monitor the camera LED blinking during boot. Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28tree: Use boolean for "eist_enable"Elyes Haouas
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
2024-08-27mainboard/google/rex: Remove HAVE_ACPI_RESUME for Intel Meteor LakeSubrata Banik
This patch removes the HAVE_ACPI_RESUME config option from the Google Rex mainboard configuration. The Intel Meteor Lake SoC does not support S3 (ACPI sleep state) entry/exit, and attempting S3 validation could lead to abnormal platform behavior. This change ensures that `_S3` is not listed as a valid wake source in the DSDT (Differentiated System Description Table) after booting to the OS. BUG=b:351025543 TEST=Booted google/rex successfully and verified that the `_S3` name variable is not present in the DSDT. Change-Id: I730ade628eea84c60ba003a0c871e729b0ee0a9f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84081 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-27mb/dell: Add Latitude E6230 (Ivy Bridge)Nicholas Chin
This was adapted from CB:22693 from Iru Cai, which was based on autoport. I do not physically have this system. Someone with physical access to an E6230 running version A11 of the vendor firmware sent me the VBT after running the command `intelvbttool --inlegacy --outvbt data.vbt`. This new version of the port has not yet been tested. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. As with the other Dell systems with this EC, this board is assumed to be internally flashable using an EC command that tells it to pull the FDO pin low on the next boot, which also tells the vendor firmware to disable all write protections to the flash [1]. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Original-Change-Id: I8cdc01e902e670310628809416290045c2102340 Change-Id: I32927beea7c29b96a851ab77ed15b0160f16d369 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82153 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-27mb/dell: Add Latitude E6330 (Ivy Bridge)Nicholas Chin
Mainboard is QAL70/LA-7741P. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A21 of the vendor firmware. This port has not been tested. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. As with the other Dell systems with this EC, this board is assumed to be internally flashable using an EC command that tells it to pull the FDO pin low on the next boot, which also tells the vendor firmware to disable all write protections to the flash [1]. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I827826e9ff8a9a534c50250458b399104478e06c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-27mb/dell: Add Latitude E6220 (Sandy Bridge)Nicholas Chin
Mainboard is codenamed Vida. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. The VBT was obtained using intelvbttool while running version A14 (latest available version) of the vendor firmware. Tested and found to boot as part of a libreboot build based on upstream coreboot commit b7341da191 with additional patches, though these do not appear to affect SNB/IVB. The base E6430 patch was tested against coreboot main. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. As with the other Dell systems with this EC, this board is assumed to be internally flashable using an EC command that tells it to pull the FDO pin low on the next boot, which also tells the vendor firmware to disable all write protections to the flash [1]. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82131 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-27mb/dell: Add Latitude E6320 (Sandy Bridge)Nicholas Chin
Mainboard is PAL70/LA-6611P. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A22 of the vendor firmware. This port has not been tested. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. As with the other Dell systems with this EC, this board is assumed to be internally flashable using an EC command that tells it to pull the FDO pin low on the next boot, which also tells the vendor firmware to disable all write protections to the flash [1]. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82130 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-27mb/dell: Add Latitude E5420 (Sandy Bridge)Nicholas Chin
Mainboard is Krug 14". I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A02 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I0283653156083768e1fd451bcf539b4e028589f4 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-27mb/dell: Add Latitude E6520 (Sandy Bridge)Nicholas Chin
Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was not tested. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-27mb/hp/snb_ivb_desktops: Add 8200 USDT variantRiku Viitanen
Based on autoport. data.vbt extracted from a running system using "intelvbttool --inlegacy" Like with 8200 SFF, OEM firmware write-protects itself, but not the IFD, GBE or ME regions when FDO jumper is applied. Therefore, ME can be shrunken with me_cleaner and BIOS region moved there. Tested: - Internal flashing from the latest endor BIOS (v2.33) - Sandy Bridge Pentium G630 CPU - RAM: 8+0, 8+4, 8+8 1866MHz DDR3 - SeaBIOS 1.16.2, metest86+ v6, coreinfo, nvramcui & tint payloads - libgfxinit txtmode & corebootfb - VGA, DisplayPort (DVI monitor through an adapter) - Gigabit Ethernet - All front and back USB ports - Booting Void Linux - Rebooting - Mini-PCIe WLAN (PCIe) - Both SATA ports: 2.5" & DVD - PS/2 keyboard and mouse - Fan control - TPM settings in SeaBIOS Untested: - Second Mini-PCIe slot (or is it mSATA): connector not present on my unit - MXM graphics Not working: S3: it sleeps for a few seconds and wakes up on its own Change-Id: I1cba7a5e664758eba7ea2ab8a55658b307d1d173 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79583 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-27mb/hp: Move compaq_8200_elite_sff_pc into snb_ivb_desktops variantsRiku Viitanen
Tested to still boot, SeaBIOS -> Void Linux Change-Id: I03d57c7e76ccdfccd58b2a6deab4dee87b02503a Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79545 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-08-26mb/dell: Add Latitude E5520 (Sandy Bridge)Nicholas Chin
Mainboard is Krug 15". I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A14 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-26mb/dell: Add Latitude E6420 (Sandy Bridge)Nicholas Chin
Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was not tested. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82126 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-26mb/dell: Add Latitude E5530 (Ivy Bridge)Nicholas Chin
Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the VBT binary, which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version A21 of the vendor firmware. This was originally tested and found to be working as a standalone board port in Libreboot, but this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-26mb/dell: Add Latitude E6530 (Ivy Bridge)Nicholas Chin
Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was not tested. I do not physically have this system; someone with physical access to one sent me the output of autoport which I then modified to produce this port. I was also sent the vbios obtained using intel_bios_dumper while running version A22 of the vendor firmware, which I then processed using `intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt. This was originally tested and found to be working as a standalone board port in Libreboot, though this variant based port in upstream coreboot has not been tested. This can be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-26nb/intel/haswell: Move SPD addresses to devicetreeKeith Hui
Introduce a sandybridge-style devicetree setting for SPD addresses, and use it instead of runtime code in mb_get_spd_map() for all haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all boards except google/slippy. Patch also covers recently added Z97 boards using Broadwell MRC. Also update util/autoport to match. abuild passes for all affected boards. autoport builds, but otherwise untested. Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-26mb/*/*/early_init.c: Remove unused included southbridgeElyes Haouas
Change-Id: Ia3fda208f5cb2e0d8a1e4da2c4392bc0f326d1ed Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84076 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-25Revert "mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT"Seunghwan Kim
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807. Reason for revert: We applied this patch for touchpad stuttering issue for XOl, but the same touchpad problem was reported. So we would revert this change and apply kernel patch (crrev/c/5808335) to avoid the touchpad issue. Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-24mb/google/rauru: Initialize flash controller in bootblockJarried Lin
Initialize SPI NOR Flash Controller (SNFC) in the bootblock. TEST=read nor flash data successfully. BUG=b:317009620 Change-Id: I88960ce7a50f67ea6f402884b714cb205836a6d8 Signed-off-by: Noah Shen <noah.shen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83924 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24mb/google/skyrim: Combine the function port_descriptors for variantsZheng Bao
Remove the weak function. Combine all the getting descriptors together. BUG=b:279144932 TEST=Build Change-Id: I981e9c52c8e5fa32296e2e43be47411557133691 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83646 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-08-24mb/lenovo/thinkcentre_m710s: Drop PCH UPDs from PEG deviceNicholas Sudsgaard
Change-Id: Ic0e0864b99c5078e5b84b9183262b3c47ffcb329 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-24mb/google/nissa/var/nivviks: enable WIFI_SARDavid Wu
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG for WIFI_CATEGORY to choose the right wifi_sar hex file. Below is the file mapping: wifi_sar_0.hex = wifi6 wifi_sar_1.hex = wifi7 BUG=b:345596420 TEST=emerge-nissa coreboot chromeos-bootimage Cq-Depend: chrome-internal:7607427 Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/dedede/var/awasuki: Modify DPTF parametersWei Hualin
Modify DPTF parameters from thermal team. 1. Add TCHG. 2. Modify the charging limit. BUG=b:360066326 TEST=Modify Thermal according to design requirements Change-Id: Ia7050b552656a70da0c992e4f54b02ccb6a7c114 Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83929 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar
2024-08-23mb/google/nissa/var/riven: Set VccIn Aux Imon IccMax to 25ADavid Wu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:348258637 TEST=Local build successfully and boot to OS normally. Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-08-23mb/google/nissa/var/sundance: Adjust GPIO GPP_C1 to no_pull-upRoger Wang
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table. BUG=b:358472598 TEST=Build and verified test result by EE team Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/nissa/var/nivviks: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: I0908ff500434401bf89a5313427cf304f32cf929 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-23mb/google/nissa/var/riven: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-22mb/google/brox/var/jubilant: Enable devices on unprovisioned fw_configRen Kuo
Add the condition of unprovisioned fw_config to enable all storages and devices. It's for first boot on all storags and preliminary test in factory when fw_config is unprovisioned. BUG=None TEST=Build jubilant firmware and boot to OS on storages when fw_config is unprovisioned and ensure all devices are enable. Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/brox: Enable storage devices on unprovisioned fw_configKarthikeyan Ramasubramanian
Storage devices are very critical to boot to OS. When probe list is defined for storage devices, all of them get disabled when fw_config is unprovisioned - a typical situation in the factory. Fix this by configuring the storage devices in device/override tree to probe and enable them when fw_config is unprovisioned. BUG=None TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned. Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/nissa/var/teliks: Adjust usb2 pin of wlanzengqinghong
Since the voltage value measured by the USB2 pin of the wlan is 500mv, it does not meet the design requirements. Adjusting the port length can reduce the voltage to 450mv, which meets the expected settings. BUG=b:361037189 TEST=1. The voltage measurements are as expected. 2. The Bluetooth and WiFi functions of the wlan module are verified to be normal. Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-22mb/google/volteer/var/drobit: Set UART GPIOs in bootblockMatt DeVillier
Enables early serial console for debugging. TEST=build/boot drobit, verify console output available starting in bootblock on CPU UART (/dev/ttyUSB1) vs ramstage. Change-Id: If94eb8caca3469143433fef06b972050f886be6a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/lenovo/thinkcentre_m710s: Disable DRIVER_LENOVO_SERIALSNicholas Sudsgaard
This mainboard does not have AT24RF08C (Asset Identification EEPROM) and will show "*INVALID*" in the SMBIOS table. Change-Id: If6f948bc4c63c7afdc8b31e1945d3c3beb99883f Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/lenovo/thinkcentre_m710s: Add USB port descriptionsNicholas Sudsgaard
Change-Id: Icc5546a8073c03ce77480b634b367d10d1ad0111 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83992 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/lenovo/thinkcentre_m710s: Add SMBIOS data for PCIe slotsNicholas Sudsgaard
Change-Id: Iaa761108acbf275820ecbec9837b81bc5d64613e Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83991 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/google/dedede: enable Intel CrashLogJędrzej Ciupis
Enable Intel CrashLog diagnostic feature by default on all Google Dedede variants. BUG=b:354834461 TEST=Built for Google Dedede and verifed that CrashLog is enabled by default. Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38 Signed-off-by: Jędrzej Ciupis <jciupis@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-08-21mb/google/byra/var/kinox: Add/update VBT filesMatt DeVillier
Kinox has two VBT options, selected via fw_config. Add the second option to CBFS, and update the original file. Extracted from Google_Kinox.14505.704.0.bin. TEST=build/boot kinix, verify firmware display init successful and payload menu visible. Verify correct VBT selected via cbmem log. Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/hp: Move compaq_elite_8300_usdt into snb_ivb_desktops variantsRiku Viitanen
Tested to still boot, SeaBIOS -> Void Linux Change-Id: Idc61e5d17f4c71fc50cf87c60a5063fc893c1d8c Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79544 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brox: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify brox DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/rex: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify rex DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I3fdc02a82d197fd2b075e0a66c578149cef3a69f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/brya: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=firmware-brya-14505.B TEST=verify brask, nissa, or brya DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/acer/g43t-am3: Remove duplicated filesFelix Singer
With commit 26b1a5f62b ("mb/acer/g43t-am3: Rework mainboard for variant mechanism"), the files related to the G43T-AM3 mainboard were supposed to be moved into its own variant directory. However, it seems it was forgotten to delete the old ones and thus remove the duplicates. Change-Id: I450fab074621d21e80216e4667eaf2510b0e14ad Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83985 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20ec/starlabs/merlin: Remove ITE mirror functionalitySean Rhodes
Remove the ITE mirror functionality; all devices will mirror automatically when they exit G3, and this is good enough. Change-Id: I9b82e1b1386b4607dfe7da9b25ba432ec0303cf8 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83629 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20arch/riscv: Remove ram probingMaximilian Brune
Previously RAM probing was necessary for our QEMU-RISCV target in order to find the available amount of memory. Now we get the memory from the devicetree propagated by QEMU, so there is no reason to keep it anymore. Tested: Start QEMU-RISCV and cause an exception to make sure the trap handler still works. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I9b1e0dc78fc2a66d6085fe99a71245ff46f8e63c Reviewed-on: https://review.coreboot.org/c/coreboot/+/83873 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20mb/google/ovis/var/deku: Set TCC_offset to 12Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 12 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I0ae97bb0b2dbb2fe8f35221522506ec1f7da47f6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83971 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20mb/google/nissa/var/riven: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-20mb/google/nissa/var/nivviks: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/brox/jubilant: Update fw_configMorris Hsu
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting. BUG=None TEST=emerge-brox coreboot Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot. Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-08-19mb/google/dedede/var/awasuki: Adjust I2C frequency to less than 400 KHzWei Hualin
Before: I2C2 - 431KHz I2C4 - 413KHz After: I2C2 - 364KHz I2C4 - 370KHz BUG=b:351968527 TEST=Rate of the actual measured machine is pass. Change-Id: Ieb75db1dc95ffd5ca806a194ae678c700fa0741c Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83906 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-19mb/google/brya/var/nova: Set up soundbar-related GPIOsKenneth Chan
Set up soundbar-related GPIOs for updating. BUG=b:358435383 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I517da8de90487533e49e46649c5acf4ccfcc5160 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/nissa/var/sundance: Adjust WWAN GPIO sequenceRoger Wang
This patch removes WWAN configuration from the bootblock. It appears that setting it up in the bootblock may not be necessary. Configure in bootblock,the seq will be triggered at the same time. The customer would like us to leave some buffer for EN to RST. BUG=b:357764679 TEST=Build and verified test result by EE team Change-Id: I2c0e789c0bec293f4bca711e53644d62f4f83551 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83792 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-18mb/acer/g43t-am3: Add Acer Q45T-AM as a variantJulia Kittlinger
This adds a new board as a variant of the Acer G43T-AM3 with the following prominent changes: * Intel Q45 northbridge (GMCH) instead of a G43 * 4 MiB of flash instead of 2 MiB * Two serial ports (one external, one internal) * A parallel port connector (internal) * An FDD connector * DVI-D instead of HDMI * No Firewire The port was done based on logs and info received via private email. It was only tested on the Acer G43T-AM3 so far, which still builds and works. Change-Id: Ic2654ca4b198bfea409992be14e89702cf67ea50 Signed-off-by: Julia Kittlinger <launchpad.vineyard395@passinbox.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-18mb/acer/g43t-am3: Rework mainboard for variant mechanismMichael Büchler
In preparation for CB:83968, rework the configuration files and move files specific to G43T-AM3 to its own variant directory. Change-Id: I425852f4bdacf7cb6688a5fb845ac3001373262e Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Signed-off-by: Julia Kittlinger <launchpad.vineyard395@passinbox.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57764 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-17mb/google/brya: Reset XHCI controller while preparing for S5Subrata Banik
This patch calls `xhci_host_reset()` function to perform XHCI controller reset. Currently, the PMC IPC times out while sending the USB-C (0xA7) command during poweron from S5 (S5->S4->S3->S0). On Brya variants, poweron from S5 state results in PMC error while sending PMC IPC (0xA7) to USB-C active ports, log here: localhost ~ # cbmem -c | grep ERROR [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:0 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:1 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x20a0 failed This problem is not seen while powering on from G3 (G3->S5->S4->S3->S0). During poweron the state of USB ports are not the same between S5 and G3 and it appears that the active USB port still is in U3 (suspend) while PMC tries to send the IPC command, which results in a timeout. This patch utilises the S5 SMI handler to reset the XHCI controller using `xhci_host_reset()` prior entering into the S5, it helps to restore the port state to active hence, no PMC timeout is seen with this code change. Supporting Doc=Intel expected to release a TA (Technical Advisory) document to acknowledge this observation and supported W/A for ADL generation platforms. Till that time, keeping this W/A as part of the google/brya specific mainboard alone. Note: other ADL-SoC based mainboards might need to apply the similar W/A. BUG=b:227289581 TEST=No PMC timeout is observed while sending USB-C PMC command (0xA7) during resume from S5. Total Time: 1,045,855 localhost ~ # cbmem -c | grep ERROR No PMC timeout error is observed with this CL. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibf06a64f055a0cee3659b410652082f31e18e149 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-16mb/qemu-aarch64: Fix include path for device_tree.hNico Huber
Recently merged commit 8cc1d79ed0c3 (mainboard/qemu-aarch64: Get top of memory from device-tree blob) missed a rebase and hence needs the include path updated. Tested `make qemu` for qemu-aarch64. Change-Id: Id669eeaabbc1710bb7e408659f2d79f682427919 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-08-16mainboard/qemu-aarch64: Get top of memory from device-tree blobAlper Nebi Yasak
Trying to probe RAM space to figure out top of memory causes an exception on AArch64 virtual machines with recent versions of QEMU, but we temporarily enable exception handlers for that and use it to help detect if a RAM address is usable or not. However, QEMU docs recommend reading device information from the device-tree blob it provides us at the start of RAM. A previous commit adds a library function to parse device-tree blob that QEMU provides us. Use it to determine top of memory in AArch64 QEMU virtual machines, but still fall back to the RAM probing approach as a last-ditch effort. Change-Id: I4cc888b57cf98e0797ce7f9ddfa2eb34d14cd9c1 Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80364 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-08-15mb/google/brox/jubilant: Disable devcies and GPIOs by fw_configMorris Hsu
1.Set unused device's GPIOs to NC based on fw_config. 2.Disable config for nvme, ufs and CNVi based on fw_config. 3.Add fw_config STORAGE_UNKNOWN to enable all storages for the first boot in factory. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge check fw_config messages in ap log verify devices on/off by fw_config on jubilant Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-15mb/goog/brya: Don't lock GPP_F15 (FPMCU_INT_L)Nick Vaccaro
Locking GPP_F15 causes DUTs with fingerprint sensor to not be able to correctly power down and stay powered down. This pin does not need to be locked. BUG=b:359692570, b:356750516 BRANCH=firmware-brya-14505.B TEST=`FW_NAME=gimble emerge-brya coreboot chromeos-bootimage`, flash and boot gimble into developer mode, then reboot into dev screen and select the "Power off" button and verify gimble powers off and does not power itself back up. Change-Id: I1c73035b02021b0d1268cd46dcd0841621556ad5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83932 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-15mb/google/dedede/var/awasuki: Enable HECI 1Weimin Wu
The AP console log contains "HECI: No CSE device" and the system cannot be entered. BUG=b:359474142 TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki The "HECI: No CSE device" message for AP log disappered Change-Id: I488056dc8bca2174dd96c28793e3202b7aae890c Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83905 Reviewed-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-15Revert "mb/starlabs/starbook/adl: Update the VBT"Sean Rhodes
This reverts commit 2eb5c1e83ef5206f384846d7514c3aebcaec5bb8. Reason for revert: The latest release of FSP will not boot without a display being connected using this VBT. The original VBT does not have this issue, nor is the original issue that commit 2eb5c1e83ef5206f384846d7514c3aebcaec5bb8 fixed. Revert it to restore booting when there is no display. Change-Id: I05f9037cd68b8b29e69156e2372a544985f4442e Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-08-14mb/google/octopus/var/phaser: Update VBTMatt DeVillier
Extracted from coreboot-Google_Phaser.11297.296.0.bin. Fixes display init on newer LASER14 boards. TEST=build/boot google/phaser, observe display init successful. Change-Id: Icb48edb4e74f147e3458f845d921a15a2d1906da Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83897 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-14mb/google/nissa/var/riven: Disable external fivrDavid Wu
In next phase, riven will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:359062365 TEST=build, boot to OS, suspend/resume work normally. Change-Id: Id5f538b2eda7820a922b8d9ee14b2bae7df3726c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-14mb/google/brox: Remove Mainboard Prepare to Sleep(MPTS) ACPI methodKarthikeyan Ramasubramanian
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power them off during suspend. Hence also remove the MPTS ACPI method. BUG=None TEST=Build Brox firmware and boot to OS. Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 00:18:50 +0000