| Age | Commit message (Collapse) | Author |
|---|
|
Add WiFi SAR table for taeko.
BUG=b:212405459
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I061dc798ae7177d05bc50648cfda46a3eec2c912
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Trackpad GPIO configuration does not align with the IRQ configuration
in the devicetree. Configure the trackpad GPIO to generate SCI on
falling edge.
BUG=None
TEST=Build and boot to OS in Nipperkin. Ensure the trackpad is
functional. Suspend the device and wake it using trackpad. Perform
suspend/resume sequence for 100 iterations.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If4324e09535d2676c8a8c6643604227eeaba0fe8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
For USB ports, we want to use custom PLD fields with more details to
indicate physical location. Custom PLD will also be added to other brya
variants in the future as we figure out physical port locations on those
devices. Type A port on MLB is removed since it is no longer used.
BUG=b:216490477
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Iea975a4f436a204d4edd19fad0f5652fb44c6301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.
BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.
Entering PSP verstage S0i3 resume
tpm_setup failed rv:1
VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
Saving nvdata
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I1b4e47cb0f0869ef0a62d1fc6adce4a11ed9b999
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ic42d5c05938c060ccaa7b1a260cd584b6e1bb1f3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Add FM350GL 5G WWAN support using drivers/wwan/fm and addtional PM
features from RTD3.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I6413f106ce6ef6c895d4861f4dbe26ac9a507d25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adjusts I2C3 speed to lower then 400KHz.
BUG=b:215095284
BRANCH=None
TEST=built and verified adjusted I2C3 speed < 400KHz
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ief6773bc37931a5393b5b1b8beaeda61d235f133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=b:201818726
TEST=build FW and system power on.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I881ded944530b21d1c5e306089d32387c9c258b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
- set GPSE-77 (Maxim jack detect) to NC for variants using Realtek audio
- set GPSW-37 to NC for all variants (not used for LPE audio)
- set GPSW-95 (Realtek jack detect) to NC for variant using Maxim audio
- set GPSE-77 as maskable on variant using Maxim audio, to match mask setting
for jack detect GPIO on other variants
- set GPSE-81 as maskable on CELES to prevent interrupt storm (likely due to
change in cherryview pinctrl driver circa kernel v3.18 which no longer masks
all interrupts at init)
Change-Id: I50d4b3516eba8906042bb8dea768b229afcf11ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Extracted from firmware image:
bios-karma.ro-11343-22-0.rw-11343-22-0.bin
Change-Id: Ic4165523a9114f748174c272ee206dfea80f4541
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add ID "AMDI5619" for machine driver to support ALC5682I-VS + ACL1019
combination.
BUG=b:211835769
TEST=Build dewatt, codec is functional with new machine driver.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic6cb3bda7b8f1b96485f7b868200c94e6c720c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com>
|
|
Fill in devicetree for nissa baseboard based on schematics.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6cd332fd05fde19078ebc4bd2797580abfb76f3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The CNVi Wifi controller is considered an untrusted device for ChromeOS,
therefore enable the new UntrustedDevice property for the cnvi_wifi
device on all brya & brask boards.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: Ieff6eea0865125a7c0f626e1981dda1c9532ebb1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Sabrina has no SATA controller, so remove the corresponding PIRQ
mapping. This was verified with PPR #57243 Rev 1.53.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I98ffa3675c361e8a74c50ebfc37e79ae63dacc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Redefine Hoglin to be used for Qualcomm's CRD 3.0 board, which uses
i2c for TPM instead of SPI. From now on, the Piglin board will be
used for all the Qualcomm reference boards that use SPI for TPM.
BUG=b:206581077
BRANCH=None
TEST=hacked an 8MB image and make sure boots on herobrine board
Change-Id: Ie1d71ec8b01f305c1c8fa815a0fb9b7ee022cc19
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Skyrim is a new Google mainboard with AMD Sabrina SOC.
BUG=b:214413553
TEST=util/abuild/abuild -t GOOGLE_SKYRIM --clean
Change-Id: I008fea4aa163b8aa66e86735b29b3fdc4e08a327
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie5d5f5441132e5b0d8991d07d4dde994fc17ab64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The I2C pad control registers of Picasso and Cezanne are identical and
the one of Sabrina is a superset of it, so factor out the functionality.
To avoid having devicetree settings that contain raw register bits, the
i2c_pad_control struct is introduced and used. The old Picasso code for
this had the RX level hard-coded for 3.3V I2C interfaces, so keep it
this way in this patch but add a TODO for future improvements.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With the APCB edit tool enabled in commit 6a3ecc5 (guybrush: Inject
SPDs into APCB), DeWatt and Nipperkin can have independent
mem_parts_used tables. Copied common table from guybrush and
ran part_id_gen to make sure it's synced to latest.
BUG=b:209486191
BRANCH=guybrush
TEST=Boot on nipperkin
Change-Id: Id30b596c2466902dfcc59dcc88dcaa00748a3949
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Gimble does not use WWAN and TCP Port 1 according to the schematics.
Hence disabling it.
BUG=b:216533766
TEST=Boot to kernel and verify WWAN and TCSS Port 1 disabled
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
change-Id: I0e7ae72620da39fc18ff253c440d006e83c576f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add CPU & PCH PCIe configs and remove the unused devices.
Configures per Atlas schematics v6.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id3145156c4ab3ec1c2d3eb6c433108a1b1cab9e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Configure SATA, USB & HSIO settings per Atlas schematics v6.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I88c898d4b0c3bfeefbca71e13dad55e2c5fc846f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ib49164cf51965228c65c6566b0711ae690b6cb50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
In the nivviks and nereid pre-proto builds, the memory straps used
don't match those generated by spd_tools. Each pre-proto build only
supports a single memory part, and each of these parts should have ID 0
(see CB:61443). Therefore, for nivviks and nereid board ID 0, hard code
the memory IDs to 0 instead of reading them from the memory strap pins.
From P1 onwards, the memory straps will be assigned based on the IDs
generated by spd_tools.
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ic0c6f3f22d7a94f9eed44e736308e5ac4157163d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add a mem_parts_used.txt for each of nivviks and nereid, containing the
memory parts used in their pre-proto builds. Generate Makefile.inc and
dram_id.generated.txt using part_id_gen.
nivviks:
Micron MT62F1G32D4DR-031 WT:B
nereid:
Samsung K3LKBKB0BM-MGCP
BUG=b:197479026
TEST=Build nivviks and nereid. Use cbfstool to check that coreboot.rom
contains an spd.bin.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ia3e5ee22199371980d3c1bf85e95e067d3c73e67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I322a94569d8a63e8c0da68a8feb394ade4ce7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Fill in the memory config based on the the schematic and doc #573387.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I6958c7b74851879dbea41d181ef8f1282bf0101d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7ec4b9368e0a63c0c0c9a92c8367a89d57f10d51
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Nissa doesn't have a SLP_S0_GATE signal, so we shouldn't generate the
related ACPI code. Therefore, move this behind a Kconfig which is
currently selected by the brya and brask baseboards.
BUG=b:197479026
TEST=Build brya0, check that there's no change to the generated dsdt.asl
Change-Id: I5a73c6794f6d3977cbff47aeff571154e41944cc
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the nissa baseboard GPIO table based on the nivviks P0 and
nereid P0 schematics. Also, add an override GPIO table for each of
nivviks and nereid.
The differences between nivviks and nereid are:
- WFC: nivviks has a MIPI WFC and nereid has a USB WFC, so the
MIPI-related pins are overriden to NC on nereid.
- The DMIC pins and speaker I2S pins were swapped after nivviks P0. The
baseboard reflects the new configuration, which will be used in
nivviks P1 onwards, nereid, and future variants. For now, nivviks
overrides the pins to the old configuration. Once nivviks P1 is
released, this will need to be updated to handle both.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: Ic923fd22abcaf7da0c607f66705a6e16c14cf8f2
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
With latest hardware revision only PCIe RP2 and RP7 are used on this
mainboard.
Change-Id: I7702c2b9058dde1c819cb1df8a68fd602f5997da
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
With latest hardware revision SATA interface is no longer used on this
mainboard. The mainboard is still in development and not yet released
and for this reason there may still be adjustments.
Change-Id: Icbf088ce4c907e207f6f5d11b8bf5556fe2c90d6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Let's re-enable PSP post codes when running PSP verstage. The original
reason we disabled POST codes was that it was causing problems during
eSPI init in bootblock. Since we now init eSPI in PSP verstage, it's
safe to re-enable them. We can now see post codes during S0i3 enter and
exit. This will help when debugging resume or suspend hangs.
Port 80 writes on suspend:
ef000020 ef00ed00 ef00ed01 ef000021 <--new
Port 80 writes on resume:
05 eea80025 eea90000 eea90100 eea90200 eea50000 eeae0000 eeae0004 eeaf0000 eeb00000 eec00000 eec00100 eec10000 eec40000 eec40500 eec40200 eefc0000 eefc0100 eec50000 ea00e0fc
ea00abc1 ea00e60b ea00e60c ea00abe1 ea00abe2 ea00abe4 ea00abe5 ea00abeb ea00abec ea00abed ea00abee ea00abef ea00e10f ea00e098 ea00e099 ea00abf0 ea00abf2 ea00e10e ea00e60c ea00e101
ea00e090 ea00e091 ea00e098 ea00e099 ea00e098 ea00e099 ea00e100 ea00e60c ea00e0b0 ea00e0b4 ea00e0b7 ea00e60c ea00e0c2 ea00e0c4 ea00e0d3 ea00e60c ea00e10d ea00e0c1 ea00e10c ea00e60c
ea00e0c4 e000 eec60000 eec20000 eec20800 b40000 eeb50000 eefc0000 eefc0300 ee070000 eed90000 eed90700 eeda0600 eedd0000 eecb0000 eecf0000 eecf0200 eee30000 eee30900 eee40000
ef000025
BUG=b:215425753
TEST=Boot/suspend/resume guybrush and verify post codes are printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie759f66be2b8ffac19145491a227752d4762a5b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Introduce a new field in the board settings EEPROM region to control
whether VT-x is to be enabled.
Change-Id: If65c58dd6e5069dba1675ad875c7ac89e704350e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
This patch enables SaGv since somehow it was accidently removed
by commit a52b9c3.
BUG=b:208719081
TEST=FW_NAME=vell emerge-brya coreboot
Fixes:a52b9c3 ("mb/google/brya: Move gpio_pm settings for brya
variants to baseboards")
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ideae3dbd9746590db104d93afadbd8d574298b83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch removes `lockable_brya_gpios` lists and
`mb_gpio_lock_config` override function from brya baseboard directory as
the variant GPIO pad configuration table is now capable of locking GPIO
PADs.
BUG=b:208827718
TEST=Able to built and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifc7354f2ae3817459b5494d572c603eba48ec66a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the FPMCU SPI and IRQ GPIOs
for all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests `FPMCU_*`
(F11-F13 and F15-F16) are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1d0b8a5aed6ea54bcfaa267cae5ca78595396ce5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the PCH write protect GPIO for
all brya and brask variants.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia125c513c09ecbb1047100e72f8540369646988e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM IRQ pins for all brya
and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
GSC_PCH_INT_ODL is locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icfc251152278c59f9a94b84fcd8c6d36c26bff62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM I2C and IRQ GPIO for
all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use PAD config macro to add lock support for all the gpios used
in CB:58352 CB:58353.
BUG=b:211573253
TEST=Boot to OS, issue warm reboot and see no issue with any IP
enumeration
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I558bab39f935ab31a89541c6498a73af70cbf9ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Aggressive Link Power Management are no longer supported on these
mainboards and must therefore be disabled. This feature can have a
negative impact on the real-time behavior of the systems.
TEST:
- Boot into system software on mc_apl1
Change-Id: I8b08381743018790a20273ea1f61e5b0a56e6015
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Samsung K4U6E3S4AA-MGCR
BUG=b:214460184
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ief75fcb7a8f1c25feaf05b1535a9528a351b23b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Galtic has a rare stability issue.
The symptom is display black screen while switching to secure mode,
normally it will occurred at the last step of factory side
and it'll follow by some specific SOCs.
Slowing the initial core display clock frequency down to 172.8 MHz
as per Intel recommend for short term solution for Gal series.
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for Galtic.
BUG=b:206557434
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic059ab306f80a6d01f4b0a380a3b767d3245478d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61103
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `DISABLE_HECI1_AT_PRE_BOOT`.
Change-Id: I7d447e73f672877c76eecea1eb8b8f41f89ce686
Fixes: commit a0d9ad322fe603d4d4cbccda9c7edcfbf0b13409
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`.
Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99
Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Based on the agah schematic, add memory settings.
BUG=b:215662929
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib45241d708d025ca75ed06e2bcf3997558723a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the crota variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215443524
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CROTA
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ic8f1a0bde286d5d014dfdf87c2a417ca6ff8b3a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
Please refer
src/mainboard/google/guybrush/variants/dewatt/variant.c
Change-Id: I8d7637467d2f16377d3c3064cdb0934d1658fdf7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
Please refer
src/mainboard/google/guybrush/variants/dewatt/variant.c
BUG=b:215432928
Change-Id: I93fca8cf9870533da1bcca5fa28ff22085e65beb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To timely update stylus charging status (b:206012072), PCHG device
events have been moved to MKBP. This patch registers the MKPB host
event as a wake-up signal to match the change.
EC filters other EC_MKBP_EVENT_* events (chromium:3413180).
BUG=b:205675485,b:206012072
Cq-Depend: chromium:3413180
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ie4536b2c0ccc37f92dfa940c5a5712340a32c82c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
As all librem_skl devices ship with the ME disabled via HAP bit and ME
firmware "neutralized" via me_cleaner, the HECI1 PCI device should be
marked off/disabled to ensure that heci_reset() is not called at the end
of heci_init(), as this causes a 15s timeout delay when booting
(introduced in commit cb2fd20 [soc/intel/common: Add HECI Reset flow in
the CSE driver]).
Change-Id: Ib6bfcfd97e32bb9cf5be33535d77eea8227a8f9f
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add senor board to QUP FW load for: APPS I2C, ESIM SPI & fingerprint SPI.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add initial support for Acer Aspire VN7-572G (Skylake-U).
Also note that there are two similar boards, Aspire VN7-792G and
Aspire VN7-592G; both are Skylake-H. These are not supported (yet).
Do not flash images intended for Aspire VN7-572G on those boards: the
GPIOs and HSIO routing will be different and may risk damage
to the hardware.
Working:
- Payload
- TianoCore (custom fork of MrChromebox's UefiPayloadPkg; edk2-202102)
- OS
- Fedora 35 (kernel 5.14.15)
- Windows 10 20H1 (bugs present: battery paging fixed; abandoning testing)
- Both DIMM slots
- eDP and HDMI display (VBT partially matches vendor's configuration)
- with FSP GOP
- with IntelGopDriver (in payload: TianoCore)
- with libgfxinit
- Audio
- Speakers and headphone jack
- Internal microphone
- HDMI audio
- Devices
- PCIe and SATA (unable to test M.2 SATA)
- Discrete graphics, Ethernet and WiFi
- USB ports (unable to test type-C, touchscreen and fingerprint reader)
- Includes internal devices (Bluetooth, SD card reader and webcam)
- TPM
- Keyboard and touchpad
- Optimus (see CB:28380, CB:40625 and CB:40628)
- ACPI functionality
- S3 suspend and resume
- EC support
- Internal flashing with flashrom
- CMOS settings
In progress:
- EC SMM functionality
Not working:
- vboot (breaks boot): See CB:58249
Notes:
- `tpm2_pcrallocate` to enable SHA256 PCR bank
Not implemented:
- WMI
Change-Id: I6340116abfeb2fbd280d143b74d323e4da3566f6
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add supported memory parts in "mem_parts_used.txt" and generate
the SPD ID 0x04 for the parts.
Shuboz memory table as follow:
value Vendor Part number
0000 MICRON MT40A512M16TB-062E:J
0001 HYNIX H5AN8G6NCJR-XNC
0010 MICRON MT40A1G16KD-062E:E
0011 SAMSUNG K4AAG165WA-BCWE
0100 MICRON MT40A512M16TB-062E:R
BUG=b:216571906
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is intended for Chrome microchip ECs
only, which have different requirements as to the amount of memory
mapped space they can claim. The brya family of boards does not use
any microchip ECs, therefore remove this Kconfig.
BUG=b:214460174
TEST=boot brya4es to kernel, no EC errors seen in cbmem log, EC software
sync still works.
Change-Id: I6e9858f29d079140ec43341de90f222b03986edb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO
from the PCH. The current power sequence does not take this into
account, and this leads to an unbalanced ref count of the reset GPIO,
which can cause one or the other of the devices to reset unexpectedly.
This patch corrects that by explicitly sequencing the reset GPIO for
both devices, which the builtin refcounting of this driver will
automatically handle.
BUG=b:214665783
TEST=Build, boot to OS and check VCM once camera stream off
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The corresponding mainboard design guide was used as a reference here.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie61af7dab35b560d2eec1ea62058f3a4dad5cb0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Also update mb/amd/chausie accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb4dcffa48c3dbdcffb66f1398b99ee96562efb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Some SKUs of google/taniks have a Bayhub LV2 card reader chip,
therefore enable the corresponding driver for the mainboard.
BUG=b:215487382
TEST=Build FW and checking SD card reader register is correct.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I34adb122bd2edc343e894a53bc12e105f4225984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
0x18 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x19 HYNIX 4GB LP4X H54G56CYRBX247
0x1a SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x1b HYNIX 8GB LP4X H54G68CYRBX248
BUG=b:165768895
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: Ib1c09ff2b88bf121de702985680b2388c0fb8427
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a dedicated memory mapping table starting at index 0x40:
0x40 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCR
0x41 HYNIX 4GB QDP LP4X H9HCNNNCPMALHR-NEE
0x42 MICRON 4GB LP4X MT53E1G32D4NQ-046 WT:E
0x43 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:A
0x44 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x45 HYNIX 4GB LP4X H54G56CYRBX247
0x46 SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x48 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCL
0x49 MICRON 8GB LP4X MT53E2G32D4NQ-046 WT:A
0x4A HYNIX 4GB QDP LP4X H9HCNNNCPMMLXR-NEE
0x4B Micron MT29VZZZAD9GQFSM
BUG=b:162379736
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I97f296cb8c35fd2f979a05d0b97a0562c1b472f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
When using the default initial core display clock frequency, Metaknight
has a rare stability issue where the startup of Chrome OS in secure mode
may hang. Slowing the initial core display clock frequency down to
172.8 MHz as per Intel recommendation avoids this problem.
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for metaknight.
BUG=None
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Init basic override devicetree based on schematics
BUG=b:211891086
TEST=FW_NAME="volmar" emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I40b364e3df2f04a6b828f4f288667b96b6e0bd22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:214890058
BRANCH=None
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I86acb172ed427d45973b9360e0413978cbd46645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new ram_id:1100 for memory part K4AAG165WB-BCWE.
BUG=b:212507858
TEST=Generate new spd file and build coreboot.
Then boot from the DUT with new memory K4AAG165WB-BCWE
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This reverts commit 2bf2e6d1ccd87cdd8d9c189972eae89e47e542c8.
According to the latest schematics, Brask supports D3-Hot for RTL8125
and does not need to operate the ISOLATE pin.
BUG=b:193750191
BRANCH=None
TEST=emerge-brask coreboot chromeos-bootimage
Test with command suspend_stress_test
Change-Id: Ica6bfb810887861f6b17ff527373824547e2406c
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set register "reset_delay_ms" to 20 to reduce power resume time.
BUG=b:204009580
TEST=tested on kano
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0695edd7c342c65df9138b1590281c5f442769b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update Elan touchpad interrupt trigger to level low from edge low to keep consistency with Synaptics touchpad. Checked with Elan PM Iris and other projects(spherion), the touchpad can be set to edge or level low trigger.
Sepherion Elan touchpad IRQ setting: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.4/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi;l=415?q=mt8192-asurada.dtsi&ss=chromiumos%2Fchromiumos%2Fcodesearch:src%2Fthird_party%2Fkernel%2F
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Elan and Synaptics touchpad wakeup from s0i3 well with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ifac49b131cadc1f8838bb6243ad6d17feb272bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Update GPIO configuration to fix Synaptics touchpad can't wakeup system from s0i3.
BUG=b:214143249
TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Synaptics touchpad wakeup from S3 with proto build.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I29734595d37283adc6fd4a0ed17f51a5c9061796
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
get_cpu_count() == 4 && get_threads_per_core() == 2: This case is for
2 Core and 4 Thread CPU (2C/4T for short).
get_cpu_count() == 2: This is for 2C/2T. This is for a possible future case.
BUG=b:208677293
Change-Id: I8d0fa96818a768b7960d92821b927dbc622675ae
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
|
|
Reference test document, update tuning registers from pass experiment
setting of phy_settings.
The document about eDP tuning can be gotten from the issue tracker of
this ticket, at the issue tracker b/203061533#comment6.
BUG=b:203061533
Change-Id: I7aa8c594d9f5caa6b2523dac079aef89e623c56f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reverts commit bd9b044a96cc ("mb/system76: rtd3: Remove SrcClk pin
on CPU RP").
Previously, RTD3 expected a PCH index for the root port and did not work
with the CPU PCIe RP present on TGL, so SrcClk pin was disabled.
Set them now that RTD3 supports mapping the index for the CPU RP.
Change-Id: Ia7519b9f5a2be52cd5575615c28d20371a26996b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Update DPTF settings provided by thermal team
BUG=b:215033682
TEST=build and tested on taniks board
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ic6860980b06e876dd4c21af26752ab6c1a3f7fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks is going to exchange i2c port for touchscreen and cr50.
BUG=b:215039999
TEST=emerge-brya coreboot
Cq-Depend:chromium:3397562
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I179949887f6d8f4bbdff7d806319e2ac368ebc2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Taniks will use two PCIE port signals with one slot, one CLK and one
CLKREQ at next build. In order to accommodate this, probe statements
are added to the devicetree. This only affects NVME SSD and EMMC.
BUG=b:215040000
TEST=Build FSP with debug output enabled, and observe the correct root
ports being initialized depending on the FW_CONFIG values for BOOT_EMMC
and BOOT_NVME.
Cq-Depend:chromium:3397561
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I2ead505088f19fd3bf9768b541838395c82ef051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
In order to guarantee data integrity an expired TCO must not hard reset
the board. Select the Kconfig switch to prevent this reset.
Change-Id: I04080c6bcd486e3a406438cc7a703165bb6945a0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since Tiger Lake platform, the HECI1 device can be disabled on
Alder Lake platform using two different mechanism:
A. Using PMC IPC command 0xA9.
B. Sending SBI message under SMM.
In current scope of Alder Lake the default implementation is using
(B) sending sbi message under SMM. A follow up patch to add the
possible options and let platform to choose the applicable one.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Default enable HECI1 device in `chipset.cb` to ensure the HECI1
device can undergo the PCI enumeration and later based on the
mainboard policy the HECI1 device can be disabled.
Mainboards that choose to make HECI1 enable during boot don't override
`DISABLE_HECI1_AT_PRE_BOOT` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie673e634fbc0bdece419c379d417b08dfb4819e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable EC keyboard backlight for volmar.
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I24ec7c8ca770cb438aabcf16b252032eef6d734d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Update initial gpio configuration for volmar
BUG=b:211891086
TEST=FW_NAME=volmar emerge-brya coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I1bd3f1b3807b546d5a827ac89f0dc9bc8aaec40a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Constructed out of a mix of autoport results, p8z77-m_pro, and
tool dumps.
Working:
- Core i7-3770K CPU
- SeaBIOS 1.13.0 boot to Linux 5.4.24 and Windows 10 1903
(all further tests are under these versions)
- USB2 / USB3
- SATA
- Gigabit ethernet
- CPU temp sensors (memtest86+ 5.0.1)
- Hardware monitoring under Linux
- Native and MRC raminit
- PCIe GPU in both "PCIEX16" slots (16x/4x, nVidia Quadro 600)
- Integrated graphics with Intel OpROM and libgfxinit (all ports)
- Serial port
- Windows with libgfxinit framebuffer
- 2ch sound playback, Linux and Windows
Not working:
- PS/2 mouse
- 6ch analog audio out
- PCI POST card in PCI slot
Untested:
- PS/2 keyboard
- Internal USB3 ports
- Digital audio out
Change-Id: If756e791ddce747cb1706414be8e41e83f88922b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
To have the new AMD Sabrina SoC code tested, add the AMD Chausie
mainboard as a copy of Majolica. This patch also changes the name from
Majolica to Chausie, selects the Sabrina SoC instead of the Cezanne SoC
and comments out the APCB_SOURCES since those aren't available in the
3rdparty/blobs repository yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic7b18f7a6ae5b8365234dd1227e0b1f7f37279da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add I2C bus for banshee in Kconfig
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I67592051b367d5a5715f8d1253ea0c11d2deb1c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Update override devicetree based on schematics
BUG=b:214871796
TEST=emerge-brya coreboot
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I05b63ebcded2f37dfb0f6c428e1fb993f476006a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Change-Id: I624dd67b6ce9b87a6031b5467eacb9a8d7cda1cd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Modify i2c signal to meet touchpad vendor spec.
Please see issue tracker for more details.
BUG=b:215487482
TEST=emerge-brya coreboot and check measured waveform in spec
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib3797d4e232654ada97092d9f2742ca040d0f0e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Lemur Pro, with its mixed memory topology, only has a DIMM at
address 0x52.
Change-Id: Iecea8c70c7fd40943d86f8918f8e3b384538b5c3
Fixes: 4dcee4f21db5 ("mb/system76/lemp10: Add System76 Lemur Pro 10")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Like the variant function to change DXIO settings, add a similar weak
function to modify the DDI settings.
Currently we follow the old way. Later we will find out a better way
to avoid using weak function.
Change-Id: I9898d717bc3025ea1ddc3b0db41325083324ed57
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
|
|
Fixes commit 6bcaf6f (mb/system76/lemp9: Configure IRQs as level
triggered for HID over I2C), which changed the interrupt configuration
in the device tree but not in the GPIO definitions. Tested on a
System76 Lemur Pro (lemp9), multi-touch I2C-HID was working.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I7f0559675a65453a1ad071f96049549a2dc21378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
BUG=b:198258604
BRANCH=guybrush
TEST=emerge-guybrush coreboot
WLAN works properly in OS
Change-Id: Ie1f295eaa57af7c2942e1807b3a0c4dcd89cd696
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I79f2206bee5403c3fb1c999918fbd2177d0d07ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Tested by checking PCR-2 data is recorded in cbmem log.
Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Update GPIO settings as per schematics v3.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I685d0b7274e3a6e707fec37d051f4818860169ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The _UID must be unique as these devices use the same _HID. Fixes BSOD
when booting Windows 10.
Change-Id: I67fda892a496dc9e5a6fa5e133ff0b35cde8fce7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times
are greater than 500ms, which is the spec for Chromebooks.
The actual kernel timing has been measured, and given the ACPI delay
after deasserting reset in addition to the delay until the kernel
driver accesses the device, delaying only 200ms in the ACPI method is
also sufficient to meet the 300ms requirement.
BUG=b:210772498
BRANCH=none
TEST=build and test touchscreen function on DUT.
TEST=suspend, wake DUT and check touchscreen function.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I4bb4eda09686cb59b6e19c741aa2b78d84332d2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Camera LED blinks as sensor is being probed during kernel boot,
which misleads user to belive camera has been turned on.
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:214155527
TEST=Build and boot Kano to OS. Verify entries in SSDT and monitor LED
during boot.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I92f1e88d0fcce49660a95d4402c8c4161e320168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61109
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:210501484
BRANCH=puff
TEST=build
Change-Id: I84bc378d6b00828366309be7dbf56a61702a14da
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
