| Age | Commit message (Collapse) | Author |
|---|
|
This will allow dropping the pointer inside romstage_params.
Change-Id: I536225351a0353298381c16cff25f39098c19bba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Instead of passing around a pointer to an array, just write the relevant
registers directly. Note that intel/baskingridge used spaces to indent
line continuations and had to be replaced with tabs to quell Jenkins.
Change-Id: Ifa06a2ab24da9b8c6aac6480542fa32d04f6d6fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The common fast SPI driver has a function to set up the SPI OPCODE menu.
Use this function here instead of coding it again as it results in the
very same register values being written.
TEST=Compare register values in both cases and make sure they match.
Change-Id: I98457a0b0652f746734ee4204e10acd09b6e5fda
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43166
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's a weak definition in chipset code that does nothing as well.
Change-Id: I2531e8b9d48eb4a1a667f22a81bb082ec98c1199
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
This reduces the differences between Bay Trail and Braswell.
Tested with BUILD_TIMELESS=1, Google Ninja remains identical.
Change-Id: I3d4c1285bdc4b061383b7bb6262f69671166b9c4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Refer to commit 7736bfc
TEST=Able to build and boot TGLRVP.
Change-Id: Ie9a97cee7d7793077167db3a642dcbca45b09427
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43139
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the selection of VARIANT_SUPPORTS_PRE_V3_SCHEMATICS
for Vilboz since it did not have any build with pre-v3 schematics.
Change-Id: I3919ad43e1dae95a4fa71073e83865e92f30dfec
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43225
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds following two helper functions:
1. variant_uses_v3_schematics() - Check whether the variant is using
v3 version of schematics.
2. variant_has_active_low_wifi_power() - Check whether the variant is
using active low power enable for WiFi.
In addition to this, Kconfig options are reorganized to add two new
configs - VARIANT_SUPPORTS_PRE_V3_SCHEMATICS and
VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH. This allows the helper
functions to return `true` early without checking for board version.
Eventually, when a variant decides to drop support for pre-v3
schematics, it can be dropped from selecting
VARIANT_SUPPORTS_PRE_V3_SCHEMATICS. Similarly, when the variant
decides to drop support for active high power enable for WiFi, it can
be dropped from selecting VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH.
Change-Id: I62851299e8dd7929a8e1e9a287389abd71c7706c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43224
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the configuration of GPIO_137 to happen in ramstage
since there is nothing in coreboot that requires the state of write
protect GPIO for zork.
Change-Id: Ibaf8e7d9dd5d13a9b39b10ac0174de345b8380f5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43223
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes "write protect" entry from the list of GPIOs
shared with depthcharge as done for other Chrome OS boards in CB:39318.
Change-Id: Ibd39e8d6835e465b2ab5eebcc245e45db5d84deb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43222
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This results in a wake from S5 as well. Since the PS/2 keyboard now
works, this behavior is annoying and, therefore, undesired.
Change-Id: I180f17c87df23f2a1bbd5c968c64a4b2bc7d9978
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42431
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows the CPU fan tach signal to reach the Super I/O.
Change-Id: Ibf73d7c7c1951b75ee4e0c731caf951f2c6bfcae
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42402
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Otherwise, there are complaints about it from the allocator.
Change-Id: Ibf6124c3720959154d0b9649871f9bf68a912f14
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42401
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO2 is not used as such, GPIO7 is though. Also relocate GPIO1 settings
under the correct PnP device. Confirmed findings against boardviews.
Change-Id: I4a88ac82d640ca709e7875b4d34b9babb1f2e0a4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42400
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I03ca67d748725283ba8382e476d70eb5554f5fb8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42399
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No wonder why the PS/2 keyboard was being detected as a mouse!
Change-Id: I7080c8210d96b079a5c08d98554ed154141086a6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42398
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only one generic decode range is needed for the HWM.
Change-Id: I964a073efbfaa1d79d3483d59ad04fe674bcb275
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42131
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Compared against superiotool dumps with vendor firmware. Still boots.
Change-Id: I49f36b2805e36695d7a53865e87dfafdb897594e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42482
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will allow dropping the pointer inside romstage_params.
Change-Id: I04b695cbe2a6485b42ab037f4f7359a2429c3440
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Comments stating that this was mainboard-specific were very wrong.
Change-Id: I7026ca9c7dabd01b4a0c0549b697e006d5f75eb8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There's no need to repeat the same values over four variants.
Change-Id: Ifc4a9961fe9c87f15a6039e6e478682fab5b0bb7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Finally enable psp_verstage for zork.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: If6a12c2074d7c84c0cb766393c66f5eff29a58d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
1. Enable HDA Pci device in devicetree
2. Enable I2C4 in devicetree and fill ACPI information
3. Pass correct IRQ GPIO for headset jack
BUG=None
BRANCH=None
TEST=Audio playback and recording works on Waddledee.
Change-Id: I77aaa27bb29460ef834c3dd090ced868f2e99616
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41765
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIC uses LPCflash utility to flash FW, it uses LPC to send the
bridge IC image from host to bridge IC, 0x600 ~ 0x6FF is used
to send BIC image for in-band update support.
TEST=Use LPCflash utility to flash BIC FW on YV3 successfully.
[root@localhost lpcflash_101_bin]# ./lpc_update.sh Y3BRDL_D06.bin
Update Bridge IC Firmware from LPC
Deltalake linux utility ver:1.01
build time: Feb 11 2020 14:30:55
Processing image file: Y3BRDL_D06.bin
.. of size 206968 (0x00032878) bytes
.. file will be padded to a 64-byte size
.. with DEBUG Enabled
Generating CRC-32 for file.
Done (0x4e3905a3).
iBytesRead (0x00007c00).
Discovering LPC boot loader.
Discovered @ 0x3f8.
Configuring LPC boot loader.
Configured @ 0x00000600.
Sending header block.
Sent.
Loading firmware into target.
Sending 31744 bytes ...............................
Sending 31744 bytes ...............................
Sending 31744 bytes ...............................
Sending 31744 bytes ...............................
Sending 31744 bytes ...............................
Sending 31744 bytes ...............................
Sending 16512 bytes .................
Load complete.
Update done!
Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com>
Change-Id: Ia1ea9b35b154225fdfd8955830e6c42b453a81ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
BUG=b:155002684
TEST=build drawcia, and check touchscreen can work
Change-Id: Ib6a190d2f6fc5132af0e58c6df9919381e88f699
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
romstage
Add VPD variables for enabling/disabling FRB2 watchdog timer and setting
the timer countdown value. By default it would start the timer and
trigger hard reset when it's expired. The timer is expected to be
stopped later by payload or OS.
Tested on OCP Delta Lake.
Change-Id: I3ce3bdc24a41d27eb1877655b3148ba02f7f5497
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
In romstage get the config from BMC IPMI and update the IIO accordingly.
Tested on OCP Delta Lake with FSP WW24 release, with lspci checking bifurcation
register values are expected.
Change-Id: I412336c32d093fe2bbdc7175f8e596923c77876f
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
BUG=b:155002811
TEST=build drawcia, and check touchpad can work.
Change-Id: I674236aa6937a0444a85e6b8e2fb9a7925b56f5c
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42922
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new variant called Pompom that is identical to Lazor
for now. Also reorder variants alphabetically while we're here.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5a0f297413765bce8353d5a781f0f67446de4e7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
CPX-SP FSP ww26 release added UPDs to allow FSP serial redirection. Also
update memory map HOB definition file accordingly.
The CPX-SP soc code is updated to direct FSP log to SOL.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ifd86fb710a0b2bdc8a43225b50b24f585d320caf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42840
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When converting to override trees in commit c1dc2d5e68 (mb/lenovo/t60:
Switch to override tree), some device nodes were missed. These are
essential, as `chip` configuration data is always tied to device
nodes. The resulting `static.c` contained multiple copies of the
`chip` configuration structs, but the wrong ones were hooked up.
The therefore missing configuration of the clock gen led to general
instability, especially with SMP under Linux (probably due to the
attempt to enter lower C states on an idle core). Passing `maxcpus=1`
to the Linux kernel served as a workaround.
Change-Id: I6c26d633d1860cf9a5415994444e75ae1c2e59ad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43150
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update GPIOs since Vilboz hardware design
follow schematic V3.2, so gpio.c is unnecessary.
BUG=b:157744136
BRANCH=NONE
TEST=flash the bios to vilboz DUT and test touchpad function
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I575f8b233b56185f3281ad7127bc274bda5ea801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42986
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At this moment, Vilboz board version is 1 and it
according to v3+ schematics, however WiFi power enable
is active high. This change sets
VARIANT_MIN_BOARD_ID_V3_SCHEMATICS for Vilboz as 1
and VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW as 2.
BUG=b:160547115
BRANCH=None
TEST=flash the bios to vilboz DUT and test WIFI module
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I9699bb839a801ab7d14c38b971ec28e3a322a997
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Two usb Type-C ports under the actual mux device. Each port has its own
ACPI device entry. These nodes are the ones that the USB Type-C
port/connector device will refer to in order to configure the mux.
TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP
board.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows definition
There was a review comment for Chromium Linux ov2740 driver that
Windows driver already set the HID as INT3474 and suggested to have
the same value for Chrome.
The upstreamed Linux driver code has INT3474 as HID and this patch is
to set the same HID in ACPI configuration.
https://patchwork.kernel.org/patch/11540753/
BUG=b:160334865
BRANCH=none
TEST=User-facing camera should work with the driver which set the HID
as INT3474
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I10e98d32899f31d91c1cc7ddfa099af73d8aef37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43006
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Volteer world-facing camera has a privacy LED and it is supposed
to be turned on only when the camera is being used. But the LED
is always on and this is to fix the issue.
RCAM_SNR_PWR_EN (RearCAMera_SeNsoR_PoWeR_ENable) GPIO, which
controls the world-facing camera LED, was not in the power-up
and power-down sequence definitions and this caused the issue.
BUG=b:160341981
BRANCH=none
TEST=Build and boot volteer proto 2 board. Start a camera app
and check the world-facing camera LED is only turned on only when
the camera is working.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: I564690baffddfdd0f998525992643aaf16ba4b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42985
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update telemetry value for SDLE test result.
BUG=b:152922299,b:152369472
TEST=emerge-zork coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I14d218243931271ba15ec4113e9bc46c670fb2ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42999
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematic and gpio table of terrador, generate gpio settings
and overridetree.cb for terrador.
BUG=b:156435028,b:151978872
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Verify that the image-terrador.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I4bf9081b034bc4cd566dde45586be8309cdbb4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42302
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds memory parts used by variant terrador to
mem_list_variant.txt and generates DRAM IDs allocated to these parts.
Added memory
1. MT53E512M64D4NW-046 WT:E
2. MT53E1G64D8NW-046 WT:E
BUG=b:159195585,b:152936481,b:156435028
TEST="emerge-volteer coreboot chromeos-bootimage", flash terrador and
verify terrador boots to kernel.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ia14f76e9cb0df64961d46f4b61b39439e56f6a8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41995
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Diffentiate Lazor and trogdor build configuration
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I3ad413ea6e658e939796bebdff8c1e0dd76417cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42730
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable HotPlug for the PCIe root port that the SD express is on so the
OS can re-train the link without needing a reboot if it goes down
unexpectedly at runtime.
BUG=b:156879564
BRANCH=master
TEST=enable HotPlug on Volteer Root Port 7 (SD express) and check in
linux that it is identified as a HotPlug capable root port
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Change-Id: Ie9d427dd297567f06123119a670b5ed2e1f73701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42897
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even with previous platforms, these entries were not
utilised for raminit.
Change-Id: I9a9a1a292bad8c4c89cbacb826c80f4098cae00f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
CB:43090 renamed con to conn to avoid issues when building on Windows.
CB:42905 introduced more uses of the old name.
Adapt the latter to comply with the former.
Change-Id: I723141add5452fc541f67cb8591793f2d64cc231
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43141
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PS/2 keyboard and mouse devices are declared twice in the DSDT, once
in mainboard and once in southbridge. It would appear in Windows
Device Manager as two PS/2 keyboards and two PS/2 mouses, all with
resource conflicts. This change drops the declaration from mainboard.
The issue was discovered when this setup was copied for p8z77-m and
being boot tested.
Change-Id: I746a960aaf3992acbcb6a7364641fc4fd12002d2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41225
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4d62a04778c8f634b48eee459808f640451b9b48
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Based on schematic and gpio table of voxel, generate gpio settings
and overridetree.cb for voxel.
BUG=b:157879197,b:155062762
TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage
Verify that the image-voxel.bin is generated successfully.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49c1923e63d87f11de362fd893905ac2f1137bba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Currently, the telemetry settings are not for the pollock platform
and might causethe power and performance issue. so applied the Pollock
reference board settings to Dalboz to improve the performance,
and the values need to be updated after the SDLE test finished.
BUG=b:157961590,b:152922299
TEST=Build.
Change-Id: I0da5b81afaa5814c13ec0257dc0eb3471be94c29
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2228257
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42998
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply the default USB2 phy tuning parameter for Zork family
BUG=b:155132211
TEST=Build, verified the default value been applied on trembyle
and the USB2 device works well.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I1f00b04173796d70147e232bafa405487b0761e1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2260216
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB-C SBU and HSL orientation configuration depends on the USB
daughterboard used on the system. This patch adds an additional
configuration for supporting passive USB daughterboards using "probe"
directives to select the appropriate configuration at runtime.
BUG=b:158673460
TEST=verified active USB DBs enumerate at USB3 speeds in linux
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Change-Id: Ia4bd97de8f974531f97469a5e47ecf4d948beca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Upcoming builds of boten will use 16 MiB SPI ROM. So create a legacy
Boten variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the boten and boten_legacy variant.
Cq-Depend: TBD
Change-Id: Idf7732768aa7fbf2281a4cbf47b7b5b4f8ef51da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Upcoming builds of drawcia will use 16 MiB SPI ROM. So create a legacy
Drawcia variant to support the builds that use 32 MiB SPI ROM.
BUG=None
TEST=Build the drawcia and drawcia_legacy variant.
Cq-Depend: TBD
Change-Id: Ifb5a4778abe38a396e35963a3270b0d3cc9809e0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This change drops the check for ENV_RAMSTAGE in mainboard_ec_init()
since it is included only in ramstage. Also, the content of
ramstage_ec_init() is moved into mainboard_ec_init().
Change-Id: I282fb07a80f4de6064a544f6dd58e8f973a597b9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43118
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mainboard_ec_init() does nothing in any stage other than ramstage. So,
this change drops the call to mainboard_ec_init() from
romstage.c. Additionally, it also drops ec.c from romstage and
verstage.
Change-Id: Iae0be4d678b0780cf532000a6c0fff1bce333c0e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the function `variant_romstage_entry()` which is
unused on zork.
Change-Id: I140ab3e837971c4c7dbef5d27616043b5fc6c2c9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops H1_PCH_INT macro for GPIO_9 since it is the same
across all variants. Also, the name differed from the schematics
version `H1_PCH_INT_ODL` creating confusion.
Change-Id: I7b038426a984d8abc460a0da3ee1dc5559d7ad5f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Needed for `chip drivers/ipmi` in the devicetree.
Change-Id: Ice70aab7cedaeb91a33dd90d763c5a487f190b8f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41687
Reviewed-by: Michael Niewöhner
Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With devicetree listing drivers/pc80/tpm, it is compulsory
to have the corresponding driver included in the build.
Followup work will drop the associated weak function
declaration that util/sconfig currently generates.
Change-Id: Ife8deb2c973ab7c7b820244b6f72efd3b56570ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11b02cc5f8b59559443329fe0c49a6fb82b7862a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41726
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For historical reasons, Windows has issues with certain names being
used for files and directories, 'con' or 'CON' being one of
them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in
order to work around this issue.
TEST=built volteer (only user of this driver as of now)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Tested on OCP Delta Lake.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I1e6e2bd25cbe3b0c0547dda9e457c4d55df28388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42428
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are 4 slots in YV3, Location In Chassis should be 1~4.
Tested=on OCP Delta Lake, dmidecode -t 2 verified the string is correct.
Change-Id: I3b65ecc6f6421d85d1cb890c522be4787362a01b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
1. Populate SMBIOS data from OCP_DMI driver read from FRU and PPIN MSR
for OEM string 1 to 6, add string 8 for PCIE configuration.
2. Set the read PPIN MSR to BMC.
Tested on OCP Delta Lake.
Change-Id: I9127cf5da1c56d8012694d070615aec24cc22fdf
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41279
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:158140797
TEST=build and boot volteer with CSE Lite SKU
Cq-Depend: chrome-internal:3100721
Change-Id: I4f939883617a1271b30c76d41e61113bbdd6ab5b
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42070
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The eSPI polarity macros were reversed. Those are fixed so adjust
the corresponding values related to the correct expectations of
the IRQ path: eSPI virtual wire IRQs are active level high. The EC
sends active level high virtual wire IRQs. The default interrupt
encodings in ACPI for P2/S devices are active edge high. Therefore,
there is no need to override anything.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic9f2e44692b20c2efabc468b10ec531e8b5a3e59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41706
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3fad7cb2ac0b88adbe75acfa7a17f5a9b0bde6c2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41705
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If25ed7b5cc545abcbf16af66173058dde75260f7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41703
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
V.2: Spare USB routed internally to another peripheral and so
no plug event hook needed.
BUG=b:1603699358,b:157479891
BRANCH=none
TEST=none
Change-Id: Ideacac417a46b96f3e82b53bbb341ecce79ee420
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42994
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160296662
BRANCH=none
TEST=none
Change-Id: I5298e1779461995a98722099b397692351767089
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42975
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160295948
BRANCH=none
TEST=none
Change-Id: I3600340d3448457942c827a463b458b280fea19a
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
BUG=b:160296661
BRANCH=none
TEST=none
Change-Id: Id5a03f2cbdca2723ab1882c619d2d34387996b27
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42973
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160296325
BRANCH=none
TEST=none
Change-Id: Iffa6997029d0babfd6dd504a6cc212bd74de3a8f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42972
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Originally, there was problem with PC Engines apu1 platform
which returned serial number value as -64. It was caused by wrong
value of dev->bus->secondary.
Source of the problem is in Porting.h header file. It contains
'#pragma pack(1)' which affects struct device. As mainboard.c
uses different binary layout because of this attribute,
reference dev->bus->secondary lands at wrong memory address.
This patch reorder includes and put <AGESA.h> and <AMD.h>
at the end of list, making struct device consistent.
As a result bus number value in device's structure is correct
and hence serial number.
TEST=`dmidecode -t 2` command in Linux Debian
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: I5e8690d100b38ac7889395d375c0ff32bdefda0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42512
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the generation of I2SM ACPI device from static asl
file to runtime generation by ACP device driver. dmic_select_gpio is
set to match version 3+ of Trembyle and Dalboz schematics. In order to
maintain backward compatibility, dmic_select_gpio is updated at
runtime using variant_audio_update for board versions that are prior
to version 3 of reference schematics.
The only difference from static generation is that the device I2SM is
added under ACPD (i.e. ACP device) instead of CREC (Chrome EC
device). It does not make any functional difference from the kernel
perspective.
BUG=b:157603026
TEST=Verified that the following device gets generated in SSDT:
Scope (\_SB.PCI0.PBRA.ACPD)
{
Device (I2SM)
{
Name (_HID, "AMDI5682") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "I2S machine driver") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x000D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"dmic-gpios",
Package (0x04)
{
\_SB.PCI0.PBRA.ACPD.I2SM,
Zero,
Zero,
Zero
}
}
}
})
}
}
Verified audio via speakers and mic input.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I5d1602c7f719eef9487ddea68e429d27408f9a76
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253638
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Sonora Pass server program was terminated.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I5354ea1e912fd25f0ac9851edf0461413ad8bb21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42948
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify DPTF parameters for faffy from thermal team.
BUG=b:160292247
BRANCH=None
TEST=emerge-puff coreboot chromeos-bootimage
verify the parameters are correct
Change-Id: Ie8290f5460838f785a587c85b2ab7dd171dd0a54
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
Currently, EC wake signal (GPIO_24) is configured early on in
romstage. However, there is no need for that since EC wake is not
really required to be configured until ramstage. This change moves
GPIO_24 configuration to happen in ramstage.
BUG=b:159832123
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6949dcd7c866df2fa028c7b2e7f347cec988e309
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42952
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the pad configurations for wake lines as
follows:
1. Pen eject wake signal needs to be configured as PAD_WAKE i.e. wake
using GPIO controller block. This is because pen eject signal is not
dual routed and the trigger filtering is set by the kernel driver
differently for S0 and S3 wake. Hence, it cannot use SCI GEVENT and
instead has to fall back to using GPIO controller wake.
2. All other wake signals (EC, trackpad, fingerprint) need to be
configured as SCI. This allows OS to enable/disable wake from these
sources if required. Example: powerd disables wake from trackpad when
in tablet mode. Hence, all other wake sources use SCI.
BUG=b:159832123
TEST=Verified wake using pen eject and EC.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id8cd5926f223db51a689ed8948040b8070cf1680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42951
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature.
BUG=None
BRANCH=None
TEST=Built for dedede platform and verified the MSR value
Change-Id: I53d1bd413c64643cf8bdaef266bde25a2f3a97ee
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42906
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for pen insert/eject operations in S0 and
wake on pen eject from S3 for morphius.
BUG=b:158814699,b:158719244
Change-Id: I3530a0aa83ec69559436687205c64524b862799b
Signed-off-by: Kevin Chiu <kevin.chiu@quanta.corp-partner.google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops macros for GPIOs which are unused or don't really
require extra indirection (same across all variants).
BUG=b:159283649
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1a94327103a419f26b1d7feda4c995363ada7281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Board version 3 for Ezkinil follows Trembyle reference v3.51
schematics and hence GPIO_86 does not need a variant specific override.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7e04baad976f94d0d94e7196f0408c3c3237b2da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops GPIO_27 configuration for trembyle reference boards
since it is unused.
BUG=b:159453643
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I57dd78e8abcc61802ca85158e7ff348460ad1d8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A late change went into v3+ of reference schematics which inverted
EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is
incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz
reference. However, some variants are built with v3+ reference
schematics, but without the inversion of EN_PWR_WIFI polarity. Thus,
we need to add support for following combinations:
1. Pre-v3 Schematics
2. V3+ Schematics
3. V3+ Schematics + Active low wifi power
This change adds a new Kconfig
`VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum
board ID that has EN_PWR_WIFI active low in hardware. Variants that
missed this change in V3+ integration (berknip and vilboz) have board
IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this
defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS.
BUG=b:159749536
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change moves variant_sleep_gpio_table() definition to dalboz and
trembyle references to allow each to make their own changes.
BUG=b:159749536, b:159453643
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I15b19cea05f1a540c56b6bc0507306d2348ac17f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change moves PCIE_RST1_L deassertion to happen as part of
variant_pcie_power_reset_configure() instead of
variant_romstage_entry() since romstage is guaranteed to run 100ms+
after PP3300_NVME is enabled. This is one of the first things that
coreboot on x86 does as part of early mainboard configuration.
Additionally, this change also drops deassertion of PCIE_RST0_L on bid
1 for dalboz since PCIE_RST0_L is already deasserted much earlier in
the boot flow.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib734aa6ff664268e68388b1997ddce676504f8d2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261996
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Aaron Durbin <adurbin@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures GPIO_40 (NVME_AUX_RESET_L) as drive low in
sleep path so that the PERST# to NVMe device keeps asserted until
coreboot reconfigures it as high on S3 resume path. This is similar to
the earlier change for PCIE_RST1_L but helps platforms that use
NVME_AUX_RESET_L instead of PCIE_RST1_L. GPIO_40 lives in S5 domain,
hence it retains state across S3 entry/exit.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie79e946eee8f393863630226ae2183e653030415
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261117
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures PCIE_RST1_L as GPO driven low on the sleep
path. This is required to keep PERST# asserted to devices until
coreboot deasserts it on S3 resume path. Without this change, on S3
resume, PCIE_RST1_L gets deasserted sooner than required resulting in
violation of PCIe reset timings.
With this change, the behavior of PCIE_RST1_L is as follows:
1. GPIO27 is configured as NF (PCIE_RST1_L) in coreboot
bootblock/romstage and driven high.
2. On S3 entry, GPIO27 is configured as GPO driven low.
* Boot out of G3: Timing should be met since GPIO_27 is pulled down by
default until coreboot configures it.
* S3 resume: Timing should be met since GPIO_27 is configured as GPO
low and it retains state across S3 entry/exit. So, should be low
until coreboot configures it.
* Warm reset: Timing should be met since it is configured as NF. So,
hardware guarantees the reset timing as seen in "warm reset.jpg" in
#46.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia0ad1522edc438fd054d927ef4a2ab5c27329c00
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261116
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change turns off power to camera and pen devices when entering
sleep since they do not act as wake sources in S3. Power to trackpad
and WiFi is left enabled since they are wake sources for S3.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I21bcdd53370372c7d43c3b685abb2a9171e42d22
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261115
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds support to configure GPIOs on the sleep path. This is
required to turn off power to devices that do not act as wake sources
and to assert reset to devices.
Currently, variant_sleep_gpio_table() returns an empty table by
default. In the following changes, entries will be added to
gpio_sleep_table.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7286cbf165024bdd81f8748e525542dce8dd8702
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253642
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Override VBT for nightfury SKU_ID = 2 to support different panel.
BUG=b:159051021
BRANCH=firmware-hatch-12672.B
TEST=Built and verified using different VBT by SKU_ID
Change-Id: I9450814aadc43cc7991457c3793f109b889186b9
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even
rst delay time already meets spec definition: 10us (minimum).
Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine
on those specific m/b+BOE(G2 TS) panel.
BUG=b:159510906
BRANCH=master
TEST=emerge-zork coreboot
boot with G2 TS, make sure G2 TS is functional
Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Configure sataHotPlug in devicetree, as this functionality
is now available for this soc.
Change-Id: If462e33d1bbef8036d598970fb2774d0fda1fbb1
Signed-off-by: Jonas Loeffelholz <Jonas.Loeffelholz@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42804
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
due to overridetree.cb set disable_xhci_lfps_pm = 0,
need correct condition expression to let function work.
BUG=b:155955302
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
configuration table
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
H1 is not a wake source and hence there is no need to configure SCI
GEVENT for it. This change drops PAD_SCI() configuration for GPIO_9
i.e. H1_PCH_INT_ODL.
BUG=b:159944426
Change-Id: Iec2285b76f9c5fa1b4b1be15128fea316fa04555
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPIO_137 does not have any gevent associated with it. This change
drops the configuration of GPIO_137 as SCI for padmelon.
Change-Id: I0579d05bda4523bbb5e3441d2a3b6e2b33b05cfc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42873
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:159187889
BRANCH=none
TEST=none
Change-Id: I13626a236f1b7385208c4181150f094cbda490ed
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
