| Age | Commit message (Collapse) | Author |
|---|
|
Winterhold boards populate either NVMe or eMMC, but not both.
This means that there is always one link that is unpopulated. The PCIe
configuration code takes longer to verify that a link is unpopulated
than to just train the link, so this slows down the boot by roughly
80ms vs the case when the device is present. Not training the device
at all lowers boot time by another 20ms, for a total of 100ms saved.
Looking at the NVMe CLKREQ signal before initializing the ports allows
us to identify which device is populated and only initialize that
device.
BUG=b:271569628
TEST=Boot Whiterun and eMMC or NVMe correctly work, boot time is lower.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0b87f5e968cd1c87e62a1c0fbdee1fc0723f655d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
These ports are not hot pluggable, so drop the parameter, which
will result it in being set to zero / not enabled.
BUG=none
TEST=build boot skyrim, verify all PCIe devices functional.
BRANCH=skyrim
Change-Id: Iaa55cc765e8f073b31f25771633789ac13e2fffa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Enable both L1.1 and L1.2 substates for the WiFi, SD card reader,
and SSD (both NVMe and eMMC). If a given device does not support
a particular substate, then it will not be enabled during PCIe
enumeration by coreboot.
BUG=b:270690572
TEST=build/boot multiple skyrim/whiterun/frostflow SKUs with different
storage configs, verify WiFi/SD card/SSD all functional and have L1
substates enabled insofar as they are supported by the device.
BRANCH=skyrim
Change-Id: Ib84df8b9d97282ae696414e52c4a65cfb0a81194
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
This allows variants to override the skyrim port descriptors.
BUG=None
TEST=Tested with following patches
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cff44f5b39d130a7191a69970cae8a88bb5d475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:272173189
TEST=run part_id_gen to generate SPD id
Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Decrease Touch i2c delay during power-on sequence from 300 ms to
150 ms to make S0ix resume time meet requirement.
BUG=b:264199989
TEST=Run the following test from chroot.
test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control
Check seconds_system_resume value less than 500 msec
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the onboard Realtek NIC definition to a child device of
PCIe port 6. This makes sure it is advertised as "onboard", such that
it appears as eno0 on systemd/udev-based systems.
This commit is very similar to
https://review.coreboot.org/c/coreboot/+/73516
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Enable whiterun/winterhold platforms to send the fuse SPL (security
patch level) command to the PSP.
BUG=b:254568112
TEST=On a platform that supports SPL fusing, a message indicating
that fusing was requested will appear in the coreboot console log,
followed by a puff of smoke when the fuse is set and the message
"OK" again on the debug console. (Kidding about the smoke.)
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I45578597234ba672c89ac421b4626088faca27d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72914
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Touchscreen signals were renamed for Rex schematics dated 21st Dec'22.
This CL fixes the comments for those signals.
BUG=b:263411413
TEST=None required (changed comments only)
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Ic40ef943d199d9f4a2bec9c0e6d4820224ef6adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The Realtek RTL8111E NIC is currently not defined as a child device,
resulting in the on_board flag not being set to 1. This means that
Linux / udev will call the device enp3s0 rather than eno0, as is
appropriate for on-board ethernet devices.
Additionally, the comment in devicetree.cb stating that PCIe port 6
is the ethernet controller is incorrect. It's actually port 4.
This patch moves the comment to the right port, and defines the NIC
as a child device of said port, so that it's properly defined as an
on-board device.
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/TFWNW3Y7IWTFD4KIBVNQYW3DODJ6SSC2/
Change-Id: Ie1e3a757a6bd6c7dd1702ced177d13711978dcc4
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73516
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for lenovo boards: t400, t410, t420, t420s, t430,
t430s, t520, t530, x131e, x1_carbon_gen1, x60, x200, x201, x220, x230. A
0x2000 RW_NVRAM region is allocated for them, with the COREBOOT size
reduced by 0x2000.
Also remove the VBOOT_VBNV_OFFSET config, since it's only used for
VBOOT_VBNV_CMOS.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
BUG=b:235293589
TEST=./util/abuild/abuild -t LENOVO_T430S -a # with VBOOT enabled
Change-Id: I7e29db7eeceec499fbbcf902a26bfe9a2076de40
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove GPP_D11,GPP_D12 in ramstage, follow baseboard brask setting.
TEST=emerge-brask coreboot
make sure HDMIA can display
Change-Id: I953170f006699e3dc9d6111ded8234f66b9162c7
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
EC_HOST_EVENT_GPU was renamed from
EC_HOST_EVENT_USB_CHARGER and thought to no longer
be used. It was subsequently removed in
I9e3e0e9b45385766343489ae2d8fc43fb0954923
Add back the mask for this event as it is infact
required on certain Brya (Agah) and Hades variants.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
BUG=b:216485035,b:258126464,b:266631157
BRANCH=none
TEST=D-notifier events are received again from EC
Change-Id: I9d7bf52efa9572e1bbd2f307420e09a7398a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73217
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Extend sd_hold to meet touchpad/touchscreen SPEC.
touchscreen:
tHD > 100 ns
touchpad:
900 ns > tHD > 300 ns
After applied the change, the tHD meets reqirement.
touchscreen:
35 ns --> 260 ns
touchpad:
43 ns --> 368 ns
BUG=b:271524470
TEST=build and measure the timing meet SPEC
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Iec2f72da80ffe8d4dd494caabbe1a97e52a81e78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Add SODIMM support, drop the solderdown based on schematics.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I85ec79c3d8f1147a875c4d04017bb50347121ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
It is necessary to increase the AVDD/AVEE of TPS65132s PMIC to +-5.7V
for powering on BOE_TV110C9M_LL0. So we set the default value to +-5.7V
and program the value to the EEPROM when configuring the display at the
first time. In this way, TPS65132s could load the correct setting from
the EEPROM after booting into kernel.
BUG=b:268292556
TEST=test firmware display pass and AVDD/AVEE is +-5.7V on Geralt.
Change-Id: I29236818444cac84d42386a371cd8934048ff948
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73443
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Move the sustained_power_limit_mW setting from the baseboard
to variants. This setting will be needed before STT is enabled,
but once STT is enabled, this setting should be removed.
BUG=b:265267957
BRANCH=none
TEST=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I7b9779600cfa8c7581732e936a714728fd618d20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I82c2016d9dfb39ff7b372815737d4ae62875340c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73373
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on taeko, taeko must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for taeko so that it will use the RPL
FSP headers for taeko.
BUG=b:270242461
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot taeko to kernel.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Cq-Depend: chrome-internal:5544049, chromium:4302529
Change-Id: Ic97400555dabb237325e7c4a8d5edcbb4779cdb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This board is based off b75pro3-m, which is very similar. Compared to
it, it just lacks a COM1 header, and the secondary ASMedia SATA3
controller.
Tested with:
CPUs:
- Core i5-3330
- Core i5-3470
- Core i7-3770
RAM:
- single bank 4GB CL11
- two banks 4+4GB CL9
- two banks 8+8GB CL10
OS:
- Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72)
Working:
- GRUB2 payload with embedded default config for boot from USB, disk
- UEFI EDK2 payload
- Intel ME stripped
- Native raminit
- Integrated graphics with libgfxinit (HDMI, DVI and VGA)
- (boot from) SATA2, SATA3, ports
- Rear USB 2 and 3 ports (supports boot)
- Internal USB 3.0 ports
- Realtek GbE NIC
- 2.0 channel audio via lineout jack output
- ACPI (power button triggers OS event)
Untested:
- Internal USB 2.0 ports
- eSATA port
- 7.1 channel audio
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ia6a6eb3e922920f4afbcb7828cd2b779b9caebcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73097
Reviewed-by: Kevin Keijzer
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The ASRock B75 Pro3-M port was lacking a cmos.default and cmos.layout,
which means nvramtool could not be used to change any nvram values, and
the defaults were always being used.
I have "borrowed" the files from the similar h77pro4-m port, which
work fine for the b75pro3-m. I can now adjust things like gfx_uma_size
and power_on_after_fail, which are quite useful to be able to modify.
Additionally, this board did not have a data.vbt, so I extracted
vbt.bin from the VGABIOS and added it.
Change-Id: I40822f2f7b013b7ac0658d66d7972b447066d593
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73451
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
On the ASRock B75 Pro3-M, resuming from S3 has always been broken;
see commit 928c6c6336f2 (mainboard/asrock: add ASRock B75 Pro3-M).
This was because 3VSBSW# was not enabled during S3, causing the
board to reboot instead of resume. This change enables 3VSBSW#
during S3, which leads to S3 resume working normally.
Another issue with this board was that hardware monitoring was not
working. The nct6775 Linux kernel module could not be loaded, due to
the device having a base I/O port of 0. This change also enables the
Super I/O properly, so that sensors-detect can find the sensor and
the kernel module can be used.
Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skyrim does not have a cardbus socket, so disable it.
Maybe cardbus support shouldn't be enabled by default?
BUG=None
TEST="PC Card (PCMCIA) is supported" no longer shows up
in dmidecode output.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic941b075e8b5082b5e61e728a77fd79c0ebba35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Only Frostflow supports the stylus, so remove the gpio-keys ACPI node
from Skyrim.
The Kconfig value DRIVERS_GENERIC_GPIO_KEYS is still enabled for all
Skyrim variants, since coreboot will drop the driver from the BIOS image
if there are no references to it (in the devicetree). If some other
design ends up using the stylus in the future we won't have to bring it
back.
BUG: none
TEST: build_packages --board=skyrim chromeos-bootimage --autosetgov
Change-Id: I9ffe215741b72b678d74405769f35167d8ded4b5
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add a config "USE_NAU8318" to enable NAU8318 support.
NAU8318 is another speaker used in Geralt. NAU8318 supports beep
function via GPIO control. So we configure the GPIO pins and pass them
to the payload.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a config "USE_MAX98390" to enable MAX98390 support.
MAX98390 is an I2S smart amplifier used in Geralt. It is also the
default speaker for Geralt reference board.
BUG=b:250459803
BRANCH=none
TEST=Verify beep function through CLI in depthcharge successfully.
Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable bus protection for display to avoid bus hang and incomplete bus
transaction.
BUG=b:264204465
TEST=test firmware and kernel display pass for MIPI panel on geralt.
Change-Id: Iac61a69f2b84966dd468442daaa59d83eec775aa
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73411
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add minimum device tree. Leave IOs default disable to optimize variant
override complexity.
BUG=b:271199379
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibb056c07193b4265352a9ec74829dcf02a9340bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Add new ram_id:0011 for Hynix H58G56BK8BX068.
Add new ram_id:0100 for Hynix H58G66BK8BX067.
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
H58G56BK8BX068 3 (0011)
H58G66BK8BX067 4 (0100)
BUG=b:270629852
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: Ida5c8354af71cd92c056a33e38d1fadfc5704977
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73252
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
According to thermal_table_0215, adjust DPTC and STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Id7df3f9bfa3f0e1337c502bc7db9e09e12cd956a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73081
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPL parameter for DPTC settings is not available for STT-enabled
platforms. It needs to be removed to avoid confusing STT calculations.
BUG=b:265267957
BRANCH=none
TEST=Run the WebGL aquarium with 5000 fish and verify that
there are no power drop peaks.
Change-Id: I8e6dad7d24883f8aadce83ebac401ecd4137d61a
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
oryp10 is nearly identical to the oryp9, with the differences being:
- Uses DDR5 RAM instead of DDR4 RAM
- Uses Realtek ALC1306 instead of TI TAS5825M
- Has an option for OLED display
Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Oryx Pro 9 (oryp9) is an Alder Lake-P board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- Both M.2 NVME SSD slots (with MZVL2500HCJQ)
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- 3.5mm microphone input
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.1.11
- Internal flashing with flashrom v1.2-1203-gf4ddd3234330
Not working:
- Discrete/Hybrid graphics
- HDMI output (requires NVIDIA GPU)
- Mini DisplayPort output (requires NVIDIA GPU)
- Detection of devices in TBT slot on boot
Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Lemur Pro 11 (lemp11) is an Alder Lake-U board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- DIMM slot (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- M.2 SATA SSD (with WDS100T2B0B)
- All USB ports
- SD card reader
- Webcam
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headset + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.1.11
- Internal flashing with flashrom v1.2-1203-gf4ddd3234330
Not working:
- On-board RAM: Requires CB:65567
- Detection of devices in TBT slot on boot
Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
BUG=b:230398487
BRANCH=none
TEST=Verify USB-A device could wake up Moli.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I1c8daf62dabe674a39b1416d886f9e470ae23a5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73174
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add custom backlight levels for all models except:
- addw1/addw2: Uses an OLED display
- bonw14: Does not use the iGPU
Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Do not reconfigured LSX0 so that the FSP values are used.
Change-Id: I7ef4af2cde4f3260f2bc2efdbf85569b0eb147fb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Move the implementation of smbios_system_wakeup_type from the mainboards
to the EC for all models that use System76 EC (everything except KBL).
Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The skolas baseboard is no longer needed, so this change removes the
baseboard files for skolas and adjusts the config settings to that
variants that used to select BOARD_GOOGLE_BASEBOARD_SKOLAS now
select BOARD_GOOGLE_BASEBOARD_BRYA and SOC_INTEL_RAPTORLAKE.
BUG=b:271470530
TEST="emerge-brya coreboot chromeos-bootimage", flash image-skolas.bin
onto a skolas and verify it boots to kernel.
Change-Id: I34cae7e471851aa52a64ce3af7bb506dc67f806b
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This is causing some issues, so disable it until those issues can be
resolved.
BUG=b:271437658, b:271199389, b:270077971
TEST=Screen always lights up on boot & after S0i3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id4aa441e4b4f76168f8243b6abafa1cf1ea08dbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
As discused earlier, the callback name 'mb_adjust_cfg' was considered
too generic. The new naming is chosen to be consistent with other
drivers' callback names designed to be used at mainboard level.
Also other functions, namely 'mb_get_edid' and 'mb_select_edid_table'
are renamed accordingly.
BUG=none
TEST=Builds for siemens/mc_apl{1,4,5,7} and siemens/mc_ehl boards
complete successfully.
Change-Id: I4cbec0e72e5f03e94df0faa36765d1a6cd873a7a
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch adds base code for the Protectli VP2420. The GPIO
config has been extracted with inteltool from the stock
firmware and then parsed with intelp2m. As of now, the platform
runs with edk2 with no apparent issues.
Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com>
Signed-off-by: Artur Kowalski <artur.kowalski@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: Ia00c27117d48b76db306d3f988f159fc5d50e4a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
BUG=b:270529665
TEST=Verify the build and boot on Rex board
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I0e3d3312c546a2a468fb906a08b8d3ec3e96c46a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie3493af340a42035ee537d83b1542be1b87d8f9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Handle the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE.
Previously, the EC sent the host event EC_HOST_EVENT_MODE_CHANGE when
body detection changed between lap/desk mode. However, that event is a
wake event, which resulted in spurious AP wake events being triggered
when the EC detected lap/desk mode changes while the AP was suspended.
To resolve this, the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE was
added, which will not be a wake event. This CL adds handling for the new
event to acpi/ec.asl to switch DPTC tables when a change is detected.
BRANCH=none
BUG=b:261141172
TEST=bodydetectmode on|off, verify host event is received
Change-Id: Iabeb7891489a209f45504804355f1fa817082976
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73298
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
There were two wrong comments in all mc_ehl gpio.c files. This patch
corrects the incorrect comments.
Change-Id: Iea356db177227d89b91be32a4e2367c612b77350
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72458
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard does not use security features like TPM.
Change-Id: Ieebbf12fc844573ffadb089da78062dd2033517a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The upcoming mc_ehl4 variant is the first Siemens Elkhart Lake mainboard
without a TPM. For this reason, the corresponding Kconfig switches must
be moved to variant level. To prevent Jenkins build from complaining,
the TPM is removed in the following patch.
Change-Id: Ic73ccd1b52e57c1cf1dd7337b0e28beaadbece8e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Measurements have shown that the automatic calibrated values for RGMII
output impedances are too low. For this reason, set the PMOS value to 16
and the NMOS to 13.
Change-Id: Ic3382889d3281faccb03819f9680a9763703b2a1
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73019
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard is based on mc_ehl1. In a first step, it contains a copy
of mc_ehl1 directory with minimum changes. Special adaptations for
mc_ehl4 mainboard will follow in separate commits.
Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are
no longer connected to a native function.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 3 (0011)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
H58G56BK7BX068 1 (0001)
BUG=b:270708359
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9eea7e277628992be9b7768a678a50425444002a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP
threshold.
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The DC boost bit was intended to be in the Controller Params word rather
than its own byte. Correct this error.
BUG=b:214581372
TEST=build
Change-Id: Ie65e57a351f0fc1f0c80ef320fd87043ee22916c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The currently used panel type could work with 500 ms but increasing
the value to 1 second allows to use a wider range of LVDS LCD panels,
as many of them specify the delay of 1 s as minimum.
BUG=none
TEST=Test link stability using a panel with minimum re-power delay of
1 s.
Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in
the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but
both mb/google/kahlee and the other amd mainboards using newer SoCs set
both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to
match the other mainboards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the ACPI_SCI_IRQ definition instead of a magic value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia860668b5c93b1b8882459d9f983cf3a23d16392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73321
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The directory holds boards other than ADL-P, such as ADL-U and ADL-H.
Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP
section to cache the MRC training data in recovery mode.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the appropriate MRC_CACHE FMAP
section.
Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Use fw_config to probe fingerprint.
BUG=b:269986245
TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass
with 1000 reboot cycles.
Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on osiris, osiris must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL
FSP headers for osiris.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot osiris to kernel.
Cq-Depend: chromium:4290627, chrome-internal:5516851
Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Remove world-facing microphone for xivu360.
Switching to world-facing camera will use the
user-facing microphone to record sound.
BUG=b:263927799
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
BUG=b:269786649
TEST=build and test USB2 port function works fine
BRANCH=dedede
Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
To support an RPL SKU on constitution, it must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for constitution so that it will use the RPL
FSP headers.
BUG=b:267539938
TEST=emerge-brask intel-rplfsp coreboot
coreboot-private-files-baseboard-brya
Change-Id: Ie4f5eb6ebb372ad07308ff25c9eb69a83793c656
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73246
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update override devicetree based on schematics.
BUG=None
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I883a806950821e6306242975764930035a94888e
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Remove `fixme` from gpio.h since it has been addressed.
BUG=none
TEST=Only a cosmetic change
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
SimNow does not support the Birman EC, so skip the EC configuration
steps when building for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia7e594ca2b6ea3cd9d6f60e7dcd1ba6ebabf85cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Remove ACPI node for pen eject event to meet project design.
BUG=b:265106657
TEST=emerge-skyrim coreboot chromeos-bootimage
Change-Id: I732de49c6319397d93671c48a6518c7c7e955fdc
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73154
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 3 (0011)
BUG=b:265190498
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I860f10552e4e4180e09ab805ca82b108fdc8f21a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73049
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 3eb17b91daac0b3acaffb01568d724d23c6f0eea.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 0e0f9e51c4c4f190cbe7ef5bffa138601c644d3c.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update GPP_E12,GPP_E13,GPP_H19 in ramstage.
Update GPP_F11 in bootblock.
TEST=emerge-brask coreboot
Change-Id: Icdca7f574282da140ec64cea9cdda3ebccbe3eb8
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73194
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define some actions based on probe results for audio:
- Disable the SoundWire GPIOs when I2S option is selected.
- Disable the I2S GPIOs when SoundWire option is selected.
- Disable all the GPIOs when no audio is enabled.
BUG=b:269497731
TEST=Test that GPIOs are configured based on the current
value of the fw_config field in cbi.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In order to improve gpio merge mechanism. Change iteration override
to padbased table override. And the following patch will change fw
config override with ramstage gpio table override.
Port of commit 7aef2b1294f2 ("mb/google/nissa: Apply gpio padbased
table override")
BUG=none
TEST=Verify devbeep at depthcharge console
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control
the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always disabled
for RPL & ADL-N based ChromeOS platforms.
It is not disabled for ADL-P based platforms because ADL-P FSP relies
on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit
sync doesn't occur if no MBP HOB, so it results S0ix issue. This
limitation is addressed in the later platforms so creation of MBP HOB
can be skipped for ADL-N and RPL based platforms.
This made skip_mbp_hob SOC chip config variable redundant which is also
removed as part of this change.
BUG=none
TEST=Build and boot to Google/Taniks.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
MX98357A is not a soundwire codec, so move it out of
drivers/intel/soundwire node.
BUG=none
TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card
enumeration and no max98357a entry under /sys/bus/soundwire/devices.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Setup FW_Config for our project.
Configure USBHub\PIXA Touchpad\Audio(rt5682s & alc1019).
BRANCH=None
BUG=b:262798445, b:268621319
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I2c590ae36d4d089f70e1799189cd414f825e5b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate
when the state of charge drops to low_battery_shutdown_percent.
BUG=b:255465618
TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898)
Verify system resumes from s0ix and then enter S5 on nivviks with steps:
1. disconnect AC
2. powerd_dbus_suspend --disable_dark_resume=false
3. fakebatt 5
4. fakebatt 4
Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This reverts commit 2e6fa8206e0a3bdd2e53542b6377fe2b37e3f26e.
Reason for revert: causing `redefinition` issue.
src/mainboard/google/poppy/variants/nami/gpio.c:527:26: error: redefinition of 'variant_romstage_gpio_table'
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
src/mainboard/google/poppy/variants/nami/gpio.c:426:26: note: previous definition is here
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
Change-Id: I107cce8bf3a5bf38edb39b9d46512ee0d467d354
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73210
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the
port.
BUG=b:269690930
TEST=kernel can detect a PL2303 USB device
BRANCH=dedede
Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Add functionality such that the FPMCU is power cycled long enough
on boot to ensure proper reset.
This solution relies solely on coreboot to sequence the power and reset
signals appropriately (150ms on boot).
BUG=b:245954151
TEST=Confirmed FPMCU is still functional on Nami.
Confirmed power is off for 150ms seconds on boot.
Confirmed RCC_CSR of FPMCU indicates power cycle occurred.
Confirmed reset is de-asserted approx 3ms after power application
(target >2.5ms)
Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms.
BRANCH=none
BUG=b:262734395
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Package C state demotion is now disabled for all RPL SoCs from within
soc/intel/alderlake/fsp_params, so no need to duplicate that in the
skolas devicetree.cb.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive`
so their configurations are unchanged.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To make MIPI/eDP panel functional on unprovisioned devices, it requires
passing SKU ID and panel ID info to the payload(depthcharge) to load the
corresponded device tree for kernel.
BUG=b:247415660
TEST=cbmem -1 |grep "SKU Code".
Change-Id: Id2254729b7bd621d1e9bc520e8f40916d0f81030
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73076
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The platform supports a discrete LPC TPM module. However, ME firmware
enables PTT by default and descriptor is configured for SPI TPM on the
platform's original firmware. So disabling PTT in ME is not enough,
because it falls back to SPI TPM. Ensure PTT is disabled in ME and SPI
TPM is disabled in descriptor soft straps.
TEST=Boot VP4650 and see LPC TPM is recognized by coreboot.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3764e085f2eb5ae957b9087d150320def7af4fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If1b4f9c8245a082ff875ae9c6102a1c45e677d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Based on product spec v1.4, update T3 timing to 150 ms from 300 ms
BRANCH=none
BUG=b:269041202
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Change-Id: Ie5bd4bc2c8be2e43470edd374af0623162067497
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Change-Id: I87e383ce2f28340dbc3c843dbf2ed0e47c00a723
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I3a846d8e4b70ccb3e6fde448c00376cd0088716c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I0cbdcd5a787d99e2579a312a51c63d7fc4120462
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I58a4e4fbd1a43462147daa58a5fda767cfd59c06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ib968fe7f9f95e8f690b46b868fd7d6f9332b4c9a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72664
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I150a4ed94bcaead6eb45f1c4b4952ae6957e0940
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I7db69e2faf412b9c6732f6dfc362d5774094ef27
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I5eb1424e9e6c1fbf20cd0bf68fbb52e1ec97f905
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
