Age | Commit message (Collapse) | Author |
|
Add FP_MCU definitions for fw_config according to the current
build matrix.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Id67b20a750d14eb23c62be9a30a5ef21d80e486a
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove SD_ABSENT since it's not being used, and CBI FW_CONFIG
in current build does not reflect this config neither.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Icfa472ff5570ac728038ec67a762289407760812
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77596
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Support Weida WDT8790A touchscreen.
BUG=b:297453122
BRANCH=firmware-brya-14505.B
TEST=touchscreen is workable and evtest shows WDHT2601
$evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Lid Switch
/dev/input/event1: Power Button
/dev/input/event10: sof-cs42l42 HDMI/DP,pcm=2
/dev/input/event11: sof-cs42l42 HDMI/DP,pcm=3
/dev/input/event12: sof-cs42l42 HDMI/DP,pcm=4
/dev/input/event13: sof-cs42l42 HDMI/DP,pcm=5
/dev/input/event2: AT Translated Set 2 keyboard
/dev/input/event3: cros_ec_buttons
/dev/input/event4: Elan Touchpad
/dev/input/event5: WDHT2601:00 2575:0921
/dev/input/event6: WDHT2601:00 2575:0921 Stylus
/dev/input/event7: WDHT2601:00 2575:0921 Stylus
/dev/input/event8: DELL Dell USB Entry Keyboard
/dev/input/event9: sof-cs42l42 Headset Jack
Change-Id: If9539afaf891c8352bc7fc8e548fd77ea57ea6ca
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77575
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I179df1e0e544783f77a485ad08293530e8a86ecd
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77592
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add intel wifi sar table for yahiko
BUG=b:298280621
BRANCH=firmware-nissa-15217.B
TEST=build, enable iwlwifi debug option, and check dmesg
Change-Id: I38d2e640fc2f7cbde3986474ca1bf7de9b2d25b4
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77585
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add variant of NAU8318(SPK) + NAU88L25B(Headphone) audio support
on brya and skolas board.
In fw_config settings, reuse max98360_enable_pads[] due to
identical i2s configurations as nau8318.
In addition, separated GPP_R7 as SPK_BEEP_EN pin.
BUG=b:236561637
TEST=emerge-brya coreboot
BRANCH=none
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Suggested-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: Ife47a83fca902cf63e09d11206e9d99fac0dc9a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I25807e116869d1bd7b8324525bc5ae1691e072e4
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77601
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board will use custom MP2 FW to dump the contents of the STB when
the SOC fails to enter/exit S0i3. Enable `PSP_LOAD_MP2_FW` by default.
BUG=b:259554520
TEST=Built and ran on skyrim device, verified that MP2 FW loads.
Change-Id: I4222521d01e2c98708f0e5b6693a8aee9e59edf2
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72118
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates rex ES variant with EC ISH enabled.
BUG=b:296886409
TEST=Able to build and boot rex4es_ec_ish variant.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I2b1cdb8cffd66badd90a7bf9825d9decb07941a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
With the Tc-cold handshake, there's a fast flicker when connecting
external displays. With it disabled, it's just one "flick", so use
this as it's lesser of two evils.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie42b935d3e69beff6a1e503a8dee69554123b4f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add support for FSP ASPM and Clock PM configuration based on Kconfig
options: PCIEXP_ASPM, PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE. For some
use cases it may be desirable to disable ASPM and Clock PM to achieve
more deterministic and higher performance of PCIe devices.
TEST=Boot MSI PRO Z690-A DDR4 without ASPM and Clock PM. Confirm all
PCIe devices are still working and ASPM and Clock PM capabilities
are not present on the PCIe Root Ports.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6d9d11016bed89dcfee6909d0d3e3e2e56237a2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69825
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is based on work by Arthur Heymans, 69852.
Get rid of the confusing "position index" and use the relative flash
offset as the Kconfig setting instead.
TEST=binary identical on amd/birman amd/majolica amd/gardenia
amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon
pcengines/apu2
google/skyrim google/guybrush google/zork google/kahlee google/myst
(The test should be done with INCLUDE_CONFIG_FILE=n)
Change-Id: I26bde0b7c70efe9f5762109f431329ea7f95b7f2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add FW_CONFIG probe for absent FIVR bypass mode on peezer.
BUG=b:296982082
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
Change-Id: I0b2053b2d732fd9462686ed7b0c9225539b28fb2
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77396
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the schematic, set below GPIO to NC:
1. GPP_C18
2. GPP_C19
3. GPP_S04
4. GPP_S05
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: If1f847d2db83b63a351203f0449cc1368bef27f4
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77558
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add HDMI GPIO configuration to early GPIO list to support
VGA text o/p in Pre-RAM stage on HDMI.
BUG=b:279173035
TEST=If CONFIG_UGOP_EARLY_GRAPHICS is set to y, check SOL
text on HDMI during Pre-RAM boot stage.
Change-Id: I13691850d09a442d5d5493a2b1dcf1145cf9797a
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch sets the Fast V-Mode (FVM) configuration parameter as
suggested in Intel doc 640982. As per the doc, Intel MTL-U 15W CPU
supports FVM on IA and SA.
Fast V-Mode (FVM): Intel Meteor Lake introduces the ability to manage
the peak power events it calls "reactive peak power management".
The Fast V-Mode is one such technique to perform the reactive peak power
management. It relies on the detector integrated inside the processor
which senses when the processor load current exceeds a present threshold
by monitoring the processor power domain IMVP (Intel Mobile Voltage
Positioning) VR sense point.
The baseline ITRIP for IA is 66A and 21A for SA.
BUG=b:286809233
TEST=Able to build and boot google/rex without seeing any performance
regression.
Change-Id: Ia7157bddf2e9586e4a91cc55e48693561072cd05
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75763
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Karis use MIPI camera only, remove related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I96316d63c068c48b5bec75d3b4c5444d15fd985f
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77510
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
According to the schematic, karis does not have a SAR sensor. Update
GPIO settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ib3b66b9594f2d0fddbbfc56e99f06b6587487f2a
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Follow schematic, set GPP_D04 to NC.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ie222a2773ff7d2b87641f55b4d37ff3bdf761cd2
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
enable GL9750 invert WP function
BRANCH=none
BUG=b:297244291
TEST=emerge-rex coreboot
Change-Id: I7fdc94b5ca6b316ee0291c38e39c5f8b08cbc127
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77414
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change causes a freeze during boot on an RPL-UR that does not have
the memory part string in the CBI.
BUG=b:296353047
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage', flash and boot
problematic DUT to kernel.
This reverts commit c51a7cdde4e1cb9014be401136c3f07f220ef365.
Change-Id: I99fe5111b5294673d9e0a5d13f9c240e0f4a92c3
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77516
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the required GPIO and FW_CONFIG support to configure BT offload
audio in discrete mode for Intel Mysty Peak module on google/rex
Proto2 HW.
BUG=b:297125514
Test=Verified BT audio playback on google/rex Proto2.
Change-Id: I560f1700f78f8b653dfcc2f26764f0ebf2652689
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77357
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
According to the schematic, karis does not have a UWB, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I8a442518c2007cde883183871cef96db416850c0
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77437
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Clevo started using OZ711LV2 for the SD card reader around the time of
making its TGL boards. Without the driver, CPUs don't go to power states
lower than C2 due to LTR not being programmed. After enabling the driver
the CPU will go to C8 while the system is idle, giving significant power
savings if the system is left on battery power.
There is another issue with RPL where it only goes to C6 instead of C8.
This may be due to the intel_idle driver in Linux (as of 6.5-rc6
mainline and 6.4.6 stable) not supporting RPL C-states.
- tgl: Started being used with the Gazelle 3060 variant
- adl: Used on all models
- rpl: bonw15 does not have an SD card reader
Change-Id: I85c60feb6dcae7d877e70a6c6f2d3a7b3296fa0e
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new memory part in the mem_parts_used.txt and generate the
SPD ID.
1. MICRON MT62F512M32D2DR-031 WT:B
BUG=b:291018417
TEST=emerge-rex coreboot
Change-Id: I6e05c0d41a4899ed64dbab7efd8904cd361cb50e
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77426
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:297276380
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot
chromeos-bootimage
Cq-Depend: chrome-internal:6373154
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: If21c7a7d329b0b1cc2c73dadb0c5b8a5b8ab27e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77399
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
According to the schematic, karis does not have a WWAN module, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I653e3b4fae8a53018a6004528d1cfb3a6c883687
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77427
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes the SAR table selection logic to use FW_CONFIG which
will eventually help to support different WiFi SAR tables.
TEST=Able to build and boot google/rex.
Change-Id: I8f1244e3c3715bc3fbe6be1ade87817ff19836de
Signed-off-by: YH Lin <yueherngl@google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77428
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable SUSCLK for MT7922 based on FW_CONFIG to avoid power leakage.
BUG=b:296511904, b:294456574
BRANCH=firmware-nissa-15217.B
TEST=build and verified by EE
Change-Id: I9a6bf0ab7cc77f95e0d64f1380eac9e022fc08e4
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77383
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set customized_leds value for RTL8111K to fix led can't work.
BUG=b:297093096
BRANCH=firmware-brya-14505.B
TEST=Verified RTL8125 and RTL8111K led can work normally.
Change-Id: Icb8624005e7e24398abdd242570970c6bfa8a09f
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77390
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the nokris variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:285838647
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_NOKRIS
Change-Id: If7cb00ce978236746dfe4d097d1f20aeebb96a35
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
BUG=b:271491845
TEST=Build and boot google/ovis on Rex P1 with buzzer added on GPP_B08
Change-Id: I44718ea15c93a075b6468f335a869a2cfa585273
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76049
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Joxer will have SKUs with no type-c on daughter board, add fw_config
for EC control it.
BUG=b:297131468
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ie8098f72e29a10ebbaf3ba3b09d6a002d09fd35a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77394
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST: Boot to ubuntu OS and verify that USB4 devices are listed in lspci command
00:08.3/06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15c0
00:08.3/06:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15c1
Change-Id: I6253a7694702179454bc1ca14825fd4f3b949c13
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Karis use I2C touchscreen only, add SOC_TCHSCR_INT(GPP_C07) to ramstage
gpio table.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ie715cfbe1984dbe38cd933312304b42ce9088806
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Fix incorrect GPIO pad numbers. GPP_F19 was mistakenly used instead of
GPP_F14, GPP_F15 and GPP_F16 GPIOs.
BUG=none
TEST=none
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I219b78a5e92d9c56799964ea88615c27aed2e92e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77401
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with a Kingston UV500.
It works the same (3Gb/s) as with vendor FW.
According to smartctl -a /dev/sda:
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Change-Id: I5c714351586e6084029ce4c54fb47cbae4d3405b
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77376
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Delete this RTC from the configuration as fa_ehl mainboard
uses a different real time clock.
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Change-Id: Ifd6b68d05a094cb4c890f1ffce62d89b771e23c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
|
|
The mainboard currently does not make use of a dedicated TPM.
Although it has one assembled. This TPM is not connected
via LPC hence it is turned off in the devicetree.
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Change-Id: I96cc38c3812d76d654339ad5b2b7f88fd1327779
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77351
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
fa_ehl mainboard does not make use of the SIEMENS NC_FPGA
as it is not placed on this board.
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Change-Id: I5f1f796e4339ba37d461d6818c2bb6ba028b89c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
Enable bit 9 for 100M mode green LED blink.
Reference:
- RTL8111H-CG Datasheet 1.92 section 7.2 for customizable led configuration
BUG=b:293983804
TEST=emerge-dedede coreboot and verify LAN LED behavior
Change-Id: Ice5686affcc014a2dfd35b7f579c8eaa38c2d3fe
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Yaviks doesn't have none DB sku, and rename to DB_1A for yahiko.
BUG=b:294928078, b:294456574
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Icb952c0716d446d5feb5580f357120a27193284e
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77384
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new mainboard called fa_ehl which is based on Siemens's
'mc_ehl2'. This commit simply copies the mainboard directory and
adjusts the naming to match the new board's name. Moreover a variants
scheme is provided for possible alternative implementations. Follow-up
commits will introduce the needed changes for the new mainboard.
Change-Id: Ia389c8812d14db8b663547e6336e900becbc8be6
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76444
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I62103563ec49769cd842fedf8c2c55118c55aa14
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I12fa83987869b9a52940a49e9f7897d62abf59ff
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I07e85f28c4f260d04317ec594e162db20f3d4ddd
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Ie7982d1001c4a65322b4e6fdbd70b20c8eee6f0e
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I78eee4c5f11b06fbc104182a4313c20be91b821b
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76905
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I6157894b96da2e9faed229a1f18c0c0b7c60897b
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Ie0304ea4343361ff0395c7204ebb76bffb5a6d97
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Icdb8e9a20ab536f80fa7358472cca01996faf447
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to the schematic, karis does not have a SPI touchscreen,
remove related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I55eb9e3cebe426fcd023789831ce64a18d075d69
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Ie2c089c0418f76ac7c8ce2e531dbbc91c66f34a0
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76901
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I15888b4e5bd46c98e0864eaa6850e1a24b22fe65
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76900
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Ief27cd6e32780683c53a88d73194c6d82c6c212b
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: I7be4a47ea2a8cb2b6f4a2d633252eec523807da6
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Ic5343de88f5f089c9ec4a992f5a6383c08641568
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76897
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Change-Id: Iced1061bab224d918fd5f0525423ac6858e1799b
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Program the EC GPIOs to enable the DT or M.2 SSD1
PCIe slots based on the config option selected.
Change-Id: Id141e5e55ef6e25722b411975a59c9764b86f624
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Create the quandiso variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:296506936
BRANCH=firmware-nissa-15217.B
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_QUANDISO
Change-Id: I846c39260e2db504d7bec6e81a8317b6824c17f4
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
According to the schematic, karis does not have a WWAN temperature
sensor, remove related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ic82c6cfec067faa37d452bed5c4977402a2139a5
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77284
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This change are added fine-tuned USB2 PHY parameters to improve the
USB2 eye diagram result.
BUG=b:296493887
BRANCH=firmware-dedede-13606.B
TEST=Local build bios successfully.
And verified the USB2 eye diagram test result.
Change-Id: I915fe689883267901e8faba28632345d8c227c28
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77359
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Separate constitution and intrepid wifi sar table in variant.c
BUG=b:291859402
BRANCH=firmware-brya-14505.B
TEST=emerge-constitution coreboot chromeos-bootimage
Change-Id: I0f89b3d5f5252a2b55bad4d91ad4ab9ec7519c50
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77242
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add some HDMI-related gpios that are needed for early sign-of-life
to the early_graphics_gpio_table array so that SOL will show up on
HDMI ports.
BUG=b:277861633
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage` and verify it builds
without error.
Change-Id: Ic36a636e68c2d457f40329a2e9c69dab5bbba41f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77353
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the schematic, karis does not have a WFC.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I9b4ecf2e96c77c131a60e48614d792370dd33423
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
TEST=Boot Ubuntu 22.04 on MSI PRO Z790-P (DDR5 variant) with Intel Core
i5-13600K using UEFI Payload.
Change-Id: Id2c77621d24bb097b930342eb1961270854d5f68
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76325
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Line is a duplicate, commented out. Drop it as it serves no purpose.
Change-Id: Id35bdea0915ca47cac4f38ede6ccbf2f2fb59f47
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77304
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C1-state auto demotion feature allows hardware to determine C1-state
as per platform policy. Since platform sets performance policy to
balanced from hardware, auto demotion can be disabled without
performance impact.
Also, disabling this feature results soc to enter PC2 and lower
state in camera preview case and save platform power.
Note: C1 demotion heuristics used EPB parameter to balance between power
and performance, i.e. low threshold when EPB is low in-order to get C1
demotion faster and vice-versa. ChromeOS operates at default EPB=0x7
(low EPB) in both AC/DC, so in DC mode it gets more C1 demotion hits
than expected (similar to AC mode) and losing power respectively.
ref. https://review.coreboot.org/c/coreboot/+/76827
BUG=b:286328295
TEST=Code compiles and correct value of c1-state auto demotion is
passed to FSP. Also verified PC residency improvement ~10% in
camera preview case.
Change-Id: I1b2db634176f0072c535608c5600846a9086fef1
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic7d51037d527f95e8664ad04e328fc27901cacde
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71993
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Existing code did not include the HID over SPI for rex4es.
This CL corrects this issue.
BUG=None
TEST=Tested on Rex
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I02f7c4b68cfee2ebb202581c9f031af99ab4b6f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77245
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I551d71d968abb6a9cadbc0f87bc9258768db1fca
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77275
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7ed982c9dcf755c97f26cc43b3dc05b898e4150a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77274
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add data.vbt files for all variants supported by current brya, brask,
and nissa recovery images. Select INTEL_GMA_HAVE_VBT for all variants
which currently have a VBT file.
TEST=build/boot various brya variants (banshee, osiris, redrix)
Change-Id: Ic66f91e264d37c3742cb17994f637604d77a1576
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77144
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `SOC_INTEL_STORE_ISH_FW_VERSION` config to dump
the ISH version as part of the .final hook.
BUG=b:285405031
TEST=Able to build and boot google/rex_ec_ish. Verify the ISH version
is same as MFIT ISH version section.
> cbmem -c | grep "ISH"
[DEBUG] ISH version: 5.6.0.28821
Change-Id: I052af85ad836ab81ff6c510bb74e042b11940a65
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77178
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add libgfxinit support for Nami, Nautilus, and Soraka. Panel timing
values taken from default panel selection extracted from the
respective VBTs.
TEST=build/boot nami w/edk2 payload and libgfxinit selected
Change-Id: If0ca389487338c47f9d8de990acf591c6907eaa9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77268
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add support for ACPI display brightness controls, so that panel
adjustment is available under Windows.
TEST=build/boot Win11 on google/magpie, verify panel brightness
controls available and functional.
Change-Id: I66daa6bbca15046994dff83bee6e7cf99aae0b33
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77271
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update VBT with file extracted from FW_MAIN_A region of firmware file
bios-endeavour.ro-13259-80-0.rw-13259-144-0.bin
TEST=build/boot endeavour
Change-Id: Ibf7b35c4e59c6fe816cf036e637483de75d6ecd4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
update DTT settings for thermal control
BUG=b:291217859
TEST=emerge-rex coreboot
Change-Id: I6e6ad653157dc87a7d87b5ffc4f9590991a7c284
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76678
Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for ACPI display brightness controls, so that panel
adjustment is available under Windows.
TEST=build/boot Win11 on google/drobit, verify panel brightness
controls available and functional.
Change-Id: Ic0c026ae09b3fde648db4bdeb4971423953c96a1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77143
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI.
BUG=b:280329972,b:283023296
TEST= Set bit 21 of FW_CONFIG with CBI
Boot rex board
Check that ISH is enabled, loaded, and functional
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I778251aadef4499427fc9855adfdd9cade3a3e70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77235
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Thunderbolt to be disabled, `UsbTcPortEn` and `TcssXhciEn`
also need to be disabled.
Change-Id: Ie02c1e0ea7583bbd78e25c8184e2cdf2b6281741
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch chooses to show the early splash screen which is an
OEM feature. The current implementation is relying on the Intel
FSP GFX PEIM to perform the display initialization.
Having this feature allows the platform to show the user notification
with 500ms since boot compared to traditional scenarios where first
user notification is coming from kernel (typically ~3sec+ after cpu
reset). Eventually this feature will help to improve the user
experience while booting Intel SoC platform based chromeos devices.
BUG=b:284799726
TEST=Able to see the early splash screen on google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2449bf97d6c82cb08f603b29643cc261738b5379
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Disable pins for SD card based on fw_config.
BUG=b:294456574
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I0b383d1b00056a69ba925bb5203dc4ca026b9d8e
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77105
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ia4bd6fe02ffa62ed8aeffb188de5c4c4b64900ff
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77106
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I1575ee1d7e4c834ad15f60a3b7d63c041a8d4890
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77007
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow schematic, modify SSD related settings.
BUG=b:294155897, b:289880020
TEST=emerge-rex coreboot
Change-Id: Ie9c228ed7ccc83afaa8365f89c1d5cdedc4f0c8c
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77006
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial devicetree config for karis.
It's copied from rex0 and only for initial settings, will update more
settings afterward.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I89585a86e8afe636d3927a21a64451b59591acda
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add initial Kconfig settings for karis. Copied from rex for support
audio codec, SD card and ISH. It's only for initial settings, will
update more settings afterward.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I4bcea7f5e678f2862b3477206838786ff5bad173
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77182
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I4076ee4a16b7260db464760d5a19e1144081bab8
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77181
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial GPIO settings for karis.
It's copied from rex0 and only for initial settings, will update more
settings afterward.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ic1e52a1eaca0aa5f68661826a70ccb89d6e302dc
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77003
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bluetooth was missing USB configuration, so add it according
to the schematics.
BUG=b:290111789
TEST=Boot on Ovis and list bluetooth with `hciconfig`
Change-Id: Iee8a3368bbad6c5b49f09ec7335d77ed63ecc784
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77146
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Crystaldrift platform to send the fuse SPL (security patch level)
command to the PSP.
BUG=b:279499517
BRANCH=none
TEST=emerge-skyrim coreboot chromeos-bootimage
Then get "PSP: SPL Fusing Update Requested." in the firmware log.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I1d41505e64bf54ad911ad7d287263013a9c458db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I8a04068dd986f2d5dbebecd0bff08cc0189a34d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change the order of enabling EC and GPE wake sources, so it comes more
obvious we can use existing chromeec handlers without changes.
Change-Id: I5a10afa2b816dc8c01074be68a63114ee027c1e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74604
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I752d5644d6140e5a6d6f53543bbbc5ef7281f3b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74824
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9ac7293e03bba773753f48163aca9385f819a71b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74822
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6b67358431d8c2b9f88b4e8948baf3497b902fed
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74821
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add support MIPI driver and DA7219 driver for pirrha.
BUG=b:292134655
BRANCH=nissa
TEST=FW_NAME=pirrha emerge-nissa coreboot
Change-Id: I6a8f0f942a54909627aad3bf447dc7225f57cef2
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Correct TPM I2C BUS number for pirrha
BUG=b:292134655
BRANCH=nissa
TEST=FW_NAME=pirrha emerge-nissa coreboot
Change-Id: I9fa0b46db752d02368f19ce8c58a4122b371c100
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77164
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|