summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2023-07-18mb/google/brya/var/taeko: Enable CsPiStartHighinEctJoey Peng
Enable CsPiStartHighinEct to fix MRC Cache fail issue BUG=b:279835630 BRANCH=none TEST=Pass MRC Cache test with toolkit 1000 times Change-Id: I25cd856785bab9c661e30e2987b43f0dc2ba9564 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-18mb/google/brya/var/kano: Enable CsPiStartHighinEct for Hynix memoryDavid Wu
According to Intel doc#763797 to overcome early command training hang issue, the CsPiStartHighinEct needs to be enabled for hynix memory. BUG=b:281643325 BRANCH=firmware-brya-14505.B TEST=Built and booted into OS. Change-Id: I95702e675fa3b73c7e8ee0c8625c7828d8129ea8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76355 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18mb/google/dedede/var/boxy: Add fw_config probe for ALC5682-VD & VSStanley Wu
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:290876132 TEST=ALC5682-VD/ALC5682I-VS audio codec can work Change-Id: Id5e0ba7a4ca57e311465ba8e74105f5ee7b8ee8a Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76435 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18pujjoteen5: modify fw_config to separate pujjoteen5 wifi sar tableLeo Chou
Use fw_config to separate pujjoteen5 intel wifi sar table. BUG=b:279984381 Test=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I2e744bf0801bd7b18817a00fcbe3d0c62b8fc3d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76453 Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-07-18mb/google/nissa/var/gothrax: Initialise overridetreeYunlong Jia
Add an initial overridetree for gothrax based on the schematic. BUG=b:274707912 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: Idfd9788a75f9c342f85d6e1a3d54327d64797dd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76013 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18mb/google/nissa/var/gothrax: Set up driver as per schematicsYunlong Jia
Drivers for Pen Garage/SDCard Reader/LTE/SAR/WWAN and I2C for TPM. BUG=b:274707912 BRANCH=None Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I1203ca13bd55b8ab96ce5d323a36ffde06860fa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76104 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyle Lin <kylelinck@google.com>
2023-07-17mb/google/rex/var/screebo: Update I2C timingZhongtian Wu
Change i2c[0] parameter Thd:dat = 50ns; Change i2c[1] parameter Thd:dat = 100ns; BUG=b:287898252 BRANCH=none TEST=Test success by EE. Change-Id: Ibdbe4e17cf21c914b48fa6dc7d3eecf8218a2d8b Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76430 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-17mb/google/rex: Disable early EC syncSubrata Banik
This patch disables early EC sync to avoid an idle delay (~3sec) without a provision to notify the user about some critical task in progress. Doing EC sync at later stage allows us to notify using graphical msg on screen to make user aware of the WIP task. BUG=b:279944831 TEST=Able to perform EC sync from depthcharge on google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I03ed40827c50e75ceaaf94e30d675014ebf22dac Reviewed-on: https://review.coreboot.org/c/coreboot/+/74837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-07-17mb/google/rex/var/screebo: Update touchscreen GPIOZhongtian Wu
Change touchscreen reset_gpio GPP_C01 -> GPP_D07; Change touchscreen enable_gpio GPP_C00 -> GPP_B17. BUG=b:289425753 BRANCH=none TEST=Test success by EE. Change-Id: I7be6a2b4e87126b281f138c819d2a0a5b1af5821 Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-17mb/google/nissa: Create craaskov variantRex Chou
Create the craaskov variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:290248526 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_CRAASKOV Change-Id: I1d12f7c3d0ef7067f4530c1c69c560f9a83561f6 Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-07-17mb/google/rex/var/karis: Generate SPD ID for supported memory partTyler Wang
Add karis supported memory parts in mem_parts_used.txt, generate SPD id. 1. MICRON MT62F1G32D2DS-023 WT:B 2. HYNIX H9JCNNNBK3MLYR-N6E 3. HYNIX H58G56BK8BX068 4. SAMSUNG K3KL8L80CM-MGCT BUG=b:291018417 TEST=Use part_id_gen to generate related settings Change-Id: I87c2c4f59454dec84d29590ee91379c9fa60ddcf Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76443 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-14mb/google/myst: Remove PRESERVE FMD flag for RW_MRC_CACHEMartin Roth
The PRESERVE flag in the FMD file tells futility not to erase the fmap partition when updating the firmware. Because of an issue on myst right now, we want the RW_MRC_CACHE partition to be erased when the firmware is updated. BUG=b:290763369 TEST=None Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id586ae057b2fd6d513ddbba5e1284dea39467d95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76478 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-07-14mb/amd,google/*/port_descriptors: use dxio_link_hotplug_type enum valuesFelix Held
Use the proper dxio_link_hotplug_type enum values for the link_hotplug field in the DXIO descriptors to replace the magic values in the code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieb1513737e6022a668287dc80a39d96cda2b18d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76439 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-14mb/google: AMD: move tpm_tis to AMD common codeGrzegorz Bernacki
It moves cr50_plat_irq_status() to common code and adds Kconfig option to specify GPIO used for interrupt. BUG=b:277787305 TEST=Build all affected platform and confirm using right GPIO number. Tested on Skyrim. Change-Id: I775c4e24cffee99b6ac3e05b58a75425029a86c8 Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75621 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-07-13mb/google/rex/var/screebo: Configure CNVi GPIO IO Standby StateWentao Qin
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked for CNVi. Meteor Lake rex platform does not wake up from low power state by bluetooth keyboard and mouse properly. It is identified that IO Standby State needs to be configured as masked to function properly for CNVi. BUG=b:286803481 TEST=Make screebo suspend to s0ix state and press a key from bluetooth keyboard. Check the platform wakes up properly from s0ix. Change-Id: I7fd342e52fa0f9126eab4c857a5adc04c26e49c6 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76406 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-13mb/google/nissa/var/pujjo: Add WWAN EM060 power on sequenceLeo Chou
Pujjo support WWAN EM060 device, use FW_CONFIG to handle the power on sequence. BUG=b:290709711 TEST=Build and check WWAN EM060 power on sequence. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I66800c75274e8e1e55d4314c82b7fcdf2a4477bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/76403 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-13mb/google/nissa/var/uldren: Modify reset_delay_ms for EKTH7D18Dtrain Hsu
Modify reset_delay_ms from 300ms to 6ms for ELAN EKTH7D18. BUG=b:285999032 BRANCH=firmware-nissa-15217.B TEST=boot uldren to ChromeOS and touchscreen is workable. Change-Id: Iffcddbe7735b7a837887dec68e1270c2af5f4556 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76417 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-12mb/{google, intel}: Enable PCH Energy Reporting for MTL platformsSukumar Ghorai
This patch enables PCH to CPU energy report feature which can be used by Intel Telemetry Driver. BUG=b:269563588 TEST=Able to build and boot google/rex and perform below check to ensure the energy reporting is correct w/o this cl: # lspci -s 00:14.2 -vvv | grep "Region 0" Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K] # iotools mmio_read32 0x957f8068 #i.e., 104th offset 0xXXXX0000 w/ this cl: #lspci -s 00:14.2 -vvv | grep "Region 0" Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K] # iotools mmio_read32 0x957f8068 #i.e., 104th offset 0xXXXXfc004 Change-Id: I9bd4625ea311a05071878aaec68433a1ba018c0d Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76353 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-07-12mb/google/geralt: Initialize I2C bus for TPS65132 in mainboardRuihai Zhou
The CB:76219 removed mtk_i2c_bus_init() from tps65132s_setup(), so we should initialize I2C bus for TPS65132 in mainboard now. BUG=None TEST=./util/abuild/abuild -t google/geralt -a Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: Iacf78221d2416f41467c709402b7e02e03dc5fc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-07-12mb/google/rex: Disable DRIVERS_INTEL_DPTF_SUPPORTS_TPCHKane Chen
There is no PCH FIVR participant on MTL and we should remove it in Rex. TEST=compile ok and make sure there no TPCH device in acpi BUG=b:290322310 Change-Id: Icf4be86da3f3cb9b1f0a3f2586b029a533c3e6a9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76402 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-11mb/google/rex: LZ4 compress ramstage instead of LZMAWonkyu Kim
for saving boot time, change ramstage compression from LZMA to LZ4. Boot time saving is around 35ms (30-37ms) while SPI size impact is 230KB. For detail, refer below. Existing: LZMA(55.6 ms) 8:starting to load ramstage 894,519 (0) 15:starting LZMA decompress (ignore for x86) 903,556 (9,036) 16:finished LZMA decompress (ignore for x86) 949,997 (46,441) 9:finished loading ramstage 950,179 (182) Changed: LZ4(17.8ms) 8:starting to load ramstage 900,876 (0) 17:starting LZ4 decompress (ignore for x86) 917,650 (16,774) 18:finished LZ4 decompress (ignore for x86) 918,690 (1,040) 9:finished loading ramstage 918,849 (158) Size impact (73KB * 3 = 219KB) fallback/ramstage 0x62940 stage 240281 LZ4 (405524 decompressed) fallback/ramstage 0x62940 stage 165452 LZMA (405524 decompressed) BUG=b:286930648 TEST= Boot to OS and check boot time Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I6610f405d287bff2eb4eee6f09026e3361405ded Reviewed-on: https://review.coreboot.org/c/coreboot/+/75769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-11mb/google/rex/var/ovis: Configure CNVi GPIO IO Standby StateJamie Ryu
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked for CNVi to function properly with the connected bluetooth devices and wake up from low power state. BUG=None TEST=None Change-Id: I977493fd95a99381279f5a3f5e679e4893369b8a Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
2023-07-11mb/google/rex/var/rex0: Configure CNVi GPIO IO Standby StateJamie Ryu
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked for CNVi. Meteor Lake rex platform does not wake up from low power state by bluetooth keyboard and mouse properly. It is identified that IO Standby State needs to be configured as masked to function properly for CNVi. BUG=None TEST=Make rex platform suspend to s0ix state and press a key from bluetooth keyboard. Check the platform wakes up properly from s0ix. Change-Id: Ia98abde584699fa01acba47a9df4ef6332ac16fd Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76338 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-11mb/google/rex/var/rex0: Reduce camera NVM size to 8KBJamie Ryu
The actual NVM size of camera module is 64KB; however, only 8KB is in use to store data. This reduces the size of both NVM0 and NVM1 to 8KB to minimize the time taken to read NVM and launch Camera preview. BUG=NONE TEST=Launch Chrome camera application and check the time taken to read eeprom from camera service log and show camera preview. It takes 2 to 3 seconds to show camera preview while it takes 4 to 5 seconds without the changes. Before the changes: 06:21:04.204944Z OpenDevice(): camera_id = 1 06:21:07.297584Z Read camera eeprom from eeprom 06:21:08.763491Z Read camera eeprom from nvmem After the changes: 21:37:23.923676Z OpenDevice(): camera_id = 1 21:37:24.386020Z Read camera eeprom from eeprom 21:37:24.574515Z Read camera eeprom from nvmem Change-Id: I0e2272b3307fea60ea7406fc6899ae2cb0134fa3 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76189 Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-11mb/google/nissa/var/gothrax: Update eMMC DLL tuning valuesSimon Yang
Update eMMC DLL tuning values for improved initialization reliability BUG=b:289763421 TEST=cold reboot stress test over 5000 cycles on Foresee and Kingston eMMC Change-Id: I63077b8717feecf3d50507abb188b7fadb5d6c79 Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76221 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-10mb/google/rex/var/ovis: Enable both Memory Channels (MC0 and MC1)Subrata Banik
This patch skips reading the MEM_CH_SEL GPIO aka GPP_E13 to determine the memory channel configuration. The signal behavior is not proper, hence limiting the DIMM capacity to half (only MC0 is enabled). This patch always reports the full memory capacity as in dual channel (both MC0 and MC1 enabled). This change is necessary to ensure that the system reports the correct memory capacity, even if the MEM_CH_SEL GPIO is not working properly. BUG=b:290174538 TEST=Able to detect 32GB memory capacity while booting google/ovis. Without this patch: localhost ~ # cat /proc/meminfo MemTotal: 16183080 kB With this patch: localhost ~ # cat /proc/meminfo   MemTotal: 32673664 kB Change-Id: I6c3fa941abb044b79b13785f7b65d09957f0487d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76359 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-10mb/google/brya/var/redrix: Use just single GFX entryWon Chung
Since multiple GFX entry causes an ACPI error when trying to write _DOD method multiple times, combine the GFX entry into one so that _DOD method is written just once. BUG=b:289854155 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I22ad70d50f1aecf8da70e8dd04a36a0a7c1c7609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76329 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-10mb/google/rex/var/rex0: Change touch over spi interrupt trigger to edgeEran Mitrani
This CL corrects the trigger for HID over SPI from Level to Edge. BUG:None TEST:Tested with I2C and SPI Change-Id: I78937af22df22d80a702477b6790a7aa40d782a4 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76116 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-10mb/google/corsola: Add support for AW37503 Power ICRuihai Zhou
The AW37503 is designed to supply positive/negative supply for driving the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we need to program the registers at boot. We program the target positive/negative output voltage via I2C and enable the power rails by pulling up ENP and ENN pins. On Starmie, we need +/-6V power supply for the MIPI panel. We program the AW37503 registers in coreboot so that kernel can control AW37503 via fixed regulators without additional settings(what we did for TPS65132). Since we distinguish AW37503 and TPS65132 by reading the vendor ID, we need to initialize I2C bus as early as possible. Therefore, we move mtk_i2c_bus_init() to mainboard_init(). BUG=b:289482828 TEST=emerge-staryu coreboot chromeos-bootimage TEST=Test the sequence the voltage Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8 Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-10mb/google/corsola: Add new board 'ponyta'cengjianeng
Add a new kingler follower 'ponyta'. BUG=b:290259648 TEST=make # select ponyta Signed-off-by: cengjianeng <cengjianeng@huaqin.corp-partner.google.com> Change-Id: I74759441957e9901bd7e5a709a2ae7d97a7cd040 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76331 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
2023-07-10mb/google/brya/var/brya: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ia756f842943b8e1f1877db7433641e6bbd05f45b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74407 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-10mb/google/brya/var/skolas: Add new GFX devices with custom _PLDWon Chung
Add new GFX devices for DDI and TCP with custom _PLD to describe the corresponding ports. BUG=b:277629750 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I889db739d6e006c1753eb8c0d208cf471d09f18d Reviewed-on: https://review.coreboot.org/c/coreboot/+/74368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-10mb/google/brya: put Bluetooth VPGIOs overridableMac Chiang
The BT VGPIOs pad config in variant of gpio.c won't be overwritten on board eventually because no matched gpios existed here. Put BT VGPIOs in gpio_table, ensure that these were able to be overwritten. The fix included crota and omnigul BT offload work successfully. BUG=b:264834572 TEST=test Bluetooth offload playback/capture in SCO profile. Change-Id: I62cecf26abd0411f7cbb0a56b8b8f0a25d370c69 Signed-off-by: Mac Chiang <mac.chiang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-07-10mb/google/brya/var/kuldax: Add fw_config and configurate AUX pinDavid Wu
Add fw_config and configurate AUX pin for MB USB Type-C. MB USB3 doesn't have re-timer, thus have to configurate the AUX pin. BUG=b:275335023 TEST=build pass Change-Id: I1334dcbaec6de1707c6892efbebaf8d460ba8648 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76348 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2023-07-07mb/google/skyrim/var/crystaldrift: Override SPI flash bus speedYunlong Jia
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100 MHz for starting next phase. BUG=b:270500631 BRANCH=None TEST=emerge-skyrim coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I0915d9b10dbfae7fff4e8874011951d1690de870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Chao Gui <chaogui@google.com>
2023-07-07mb/google/brya/var/constitution: Update overridetreeMorris Hsu
constitution only has one TBT port, remove tcss_dma1. BUG=None TEST=emerge-constitution coreboot Change-Id: Ia4eb4371eb20e75a0f464e2b087fd2fe59569537 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Pablo Ceballos <pceballos@google.com>
2023-07-06util/apcb: Add apcb edit tool for phoenixRob Barnes
Add a new apcb edit tool, apcb_v3a_edit.py, that injects SPDs into an APCB for phoenix platform. The tool makes several assumptions: * Each SPD only uses blocks 0, 1, 3 and 5. All other blocks are zero. * Each block is 64 bytes. * Dimm and socket are always 0 * Unused SPD entries are zero'd BUG=b:281983434 BRANCH=None TEST=build, flash, boot myst Change-Id: Ifb50287de77138170714a702ab87d56427aacfef Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76188 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-06drivers/tpm: Move tis_plat_irq_status to cr50 driverGrzegorz Bernacki
tis_plat_irq_status() function is used only by Google TPM. It should be moved to drivers/tpm/cr50.c. The name of the function was changed to cr50_plat_irq_status(). BUG=b:277787305 TEST=Build all affected platforms Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8 Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-07-06mb/google/brya/var/mithrax: Generate SPD ID for supported partsJohn Su
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL (Samsung) 2. K4UBE3D4AB-MGCL (Samsung) BUG=b:289873670 BRANCH=brya TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-05soc/intel/meteorlake: Set TCC to 90°CSumeet Pawnikar
Set tcc_offset value to 20 in chipset for Thermal Control Circuit (TCC) activation feature for meteorlake silicon. Also, remove tcc_offset default value from rex baseboard and variants. BUG=b:270664854 BRANCH=None TEST=Build FW and test on rex board Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-05mb/google/rex/var/screebo: Update touchpad I2C timingZhongtian Wu
Change i2c[3] parameter to meet below timing: t-HIGH > 600ns; 900ns > Thd:dat > 300ns. BUG=b:286030723 BRANCH=none TEST=Test success by EE. Change-Id: I4b2d958a5a0d41e2cfa1087f5cb94cc83bbb1739 Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76169 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-05mb/google/rex/var/ovis: Set TCC to 100°CSubrata Banik
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature for ovis. BUG=b:270664854 TEST=Build and boot google/ovis. Change-Id: I0ef626f6cc460f1b460297804b97038705efaf4c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-05mb/google/rex/var/ovis: Add Power Limit for 28WSubrata Banik
This patch adds a power limit for Ovis with 28W Intel Meteor Lake silicon. Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982 BUG=b:289854108 TEST=Able to boot google/ovis with power limit being overridden as appropriate to 28W. Change-Id: I312c70720fd89261c53d5bd4f45236e829d6c790 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-07-05mb/google/rex: Temporarily disable the crashlogKapil Porwal
Currently, boards with ES2 silicon are unable to boot with crashlog enabled because crashlog driver is unable to handle invalid data. Temporarily disable the crashlog to unblock development until the issue is fixed. BUG=b:289749310 TEST=Able to boot to the OS on Screebo Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ic63cf9cf5bfa2c92d8f2c5b13df2f23dc118b389 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76231 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-07-05mb/google/rex/var/screebo: Update touchscreen I2C timingZhongtian Wu
Change i2c[0] parameter to meet touchscreen timing. Thd:dat > 100ns. BUG=b:287898252 BRANCH=none TEST=Test success by EE. Change-Id: I30e7c87d788f7f144276c45e8475af65f1f132ae Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-04mb/google/rex: Enable Bluetooth offload for soundwire audioUday M Bhat
This patch enables BT offload feature for soundwire audio over SSP1. BT mode is selected via FW_CONFIG and corresponding VGPIOs are programmed. BUG=b:275538390 TEST=build and verify BT offload on rex soundwire audio Change-Id: I99df78787d9f54c91bcedf6f70352890a715cdb3 Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75924 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-04mb/google/nissa/var/uldren: Update DPTF parameters and tcc_offsetDtrain Hsu
Follow the Project_Uldren_Thermal_paramters_list_2023_0626.xlsx to modify DPTF parameters and tcc_offset. - Set tcc_offset to 3. - Update Critical Policy trip point. - Update Power Limits PL1 minimum step size to control limits (in mW). BUG=b:282598257 BRANCH=firmware-nissa-15217.B TEST=boot uldren to ChromeOS and pass thermal test. Change-Id: Ic5bbb3aa3b036a1eae8a95f63b570db2dc6da978 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76105 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-07-04mb/google/nissa/var/joxer: Disable external fivrMark Hsieh
In next phase, joxer will remove external fivr. BUG=b:285477026 TEST=emerge-nissa coreboot and boot to OS, suspend/resume work normally. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I7fd7ad90e1544966170df402243604379f5790db Reviewed-on: https://review.coreboot.org/c/coreboot/+/76187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-07-03mb/google/nissa/var/pujjo: Tune SX9324 register for pujjoteen5Leo Chou
Update SX9324 register settings based on tuning value from SEMTECH. BUG=b:279510275 TEST=Check i2c register settings on Pujjoteen5 and confirm P sensor function can work. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Idc9a2dc817e027551e209c0a26eeebad398f710c Reviewed-on: https://review.coreboot.org/c/coreboot/+/75900 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/nissa/var/joxer: support for different WiFi SAR tablesMark Hsieh
Set the WIFI_SAR_ID field in FW_CONFIG to selcet the correct SAR table. BUG=b:285477026 TEST=emerge-nissa coreboot and check the SAR value Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ibea62c77ecad9b2c475452b706779e4cfc6b06d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76144 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/nissa/yaviks: Tune eMMC DLL value for boot issueChia-Ling Hou
Resolve boot issue by tuning RX HS50 and HS200. BUG=b:265611305 TEST=Reboot test 2500 times pass Change-Id: I8a2727dc0ce9dc86c6bfb6d85567afee1734db62 Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75812 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
2023-07-03mb/google/kahlee: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:283245785 BRANCH=firmware-grunt-11031.B TEST=Observe kernel ec panic handler run when ec panics Change-Id: I8eeb5c0935d0531c21bcf4cd3d4fd9dc80b54f79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-07-03mb/google/rex: Set AUX orientation at SoC to follow cable for kb8010Caveh Jalali
This configures the SoC to flip the orientation of the AUX pins to follow the orientation of the cable when using the kb8010 retimer. This is necessary when there is no external retimer/mux or the retimer/mux does not implement the flip. The kb8010 retimer does not support this feature, so let the SoC do the flip. BUG=b:267589112 TEST=verified DP-ALT mode works in both cable orientations on rex with reworked kb8010 DB by flykt@ Change-Id: Iad093e27617b80f8301008deb00b57fb9b3a48ba Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76137 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-03mb/google/kahlee: Enable Secure OSJon Murphy
Secure OS was disabled on Grunt devices since it isn't used. This reduces the attack surface and is meant to mitigate potential security risks. However, this prevents users from using an alternate OS. Enable Secure OS upstream to allows users to use Windows, and ensure that it is still disabled in the chromium repo. BUG=b:287630343 TEST=Builds with Secure OS included. Cq-Depend: chromium:4620881 Change-Id: I213aebc41cae300ecee8c01fc5c7687f7e7f5ee3 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-07-03mb/google/dedede/var/taranza: Add more USB configurationSheng-Liang Pan
- remove usb2_ports[5] since taranza doesn't have PL2303. - add usb2_ports[6] and usb3_ports[1] for Type-A Port A4. BUG=b:288094807, b:278167978 TEST=emerge-dedede coreboot chromeos-bootimage verified all the USB port works Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7b411c21271497ba386143140aa8cfbb17a1a111 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76186 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Enable LAN0Subrata Banik
This patch performs below operations to enable LAN0. - Complete the LAN PEREST power sequencing - Program the SRC_CLKREQ (GPP_D20) with correctly. - Add overridetree.cb entry to configure the LAN0 device. BUG=b:289395519 TEST=Able to boot google/ovis with LAN0 being enabled. Change-Id: I91b0a76395ade4459cf8705c333728a71f95df14 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76213 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Enable LAN1Subrata Banik
This patch performs below operations to enable LAN1. - Add overridetree.cb entry to configure the LAN device. - Complete the LAN1/SD PEREST power sequencing BUG=b:289395519 TEST=Able to boot google/ovis with LAN1 being enabled. Change-Id: Ifb67cb8e6fc03e3ff14b1b3d8382322fd0b3aeff Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76212 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_V12 PADSubrata Banik
This patch configures GPP_V12 aka SOC_SLP_LAN_L properly as per the Ovis schematics dated June'23 to ensure LAN port is not in sleep. BUG=b:289395519 TEST=Able to measure SLP_LAN PIN and confirm it's deasserted. Change-Id: I1fe8715862823149c8a1f05e3e4463a615fbbbce Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76211 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_C10 PADSubrata Banik
This patch configures GPP_C10 aka EN_LAN_RAILS properly as per the Ovis schematics dated June'23 to ensure LAN ports having power. BUG=b:289395519 TEST=Able to measure LAN port power is enabled with this CL. Change-Id: I3f4d611313325dba66905e0c8ef391765a1fe7a7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-30mb/google/dedede/var/taranza: Disable EXT_VRSheng-Liang Pan
The taranza removed the APW8738BQBI and "disable_external_bypass_vr" should be set to "1" to disable. BUG=b:288978340 TEST=emerge-dedede coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I0a849fbfacba1d200c969c66bb058863d7ab3085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-30mb/google/rex/var/ovis: Fix mux change as per schematicsSubrata Banik
This patch updates the mux connection to reflect the Ovis schematics dated June to ensure Type-C1 is able to work in DP-ALT mode. BUG=b:289300284 TEST=Able to get display over Type-C1 port. Change-Id: I223eb3a96e6a1b3abb4168fcf59c0df04c1b4498 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76149 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-29mb/google/nissa/var/gothrax: Add GPIO table for gothraxYunlong Jia
Configure GPIOs according to schematics. BUG=b:287563817 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: If852c7a30edb9fb778872414cb15dc3446aebc55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75872 Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-29mb/google/dedede/var/dibbi: Update power limitsChia-Ling Hou
Add ramstage.c in Makefile.inc and update Dibbi power limits in Dibbi ramstage.c. BUG=b:281479111 TEST=emerge-dedede coreboot and check psys and PLx value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ieaff856b762b546f3e99acb7ba2ce15791193da6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75681 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede: Support variant specific power limitsChia-Ling Hou
With newer dedede design, it's required to config corresponding psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of adapter. BUG=b:281479111 TEST=emerge-dedede coreboot and check correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I583c930379233322c41027805369f81d02000ee7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-06-28mb/google/skyrim/var/winterhold: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: Ib12c73f95030625b52e26f86e932ee2aaa6ea522 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-06-28mb/google/skyrim/: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: I1f3e305c48801b4e499de56d06c0dcd3eeacc626 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76091 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-06-28mb/google/rex/var/ovis: Enable crashlog and IOE dieJakub Czapiga
BUG=b:262501347 TEST=Boot on Ovis board. Change-Id: I43aac857e3ec7989c9ab5201cd8f24a7c877e76b Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex: Avoid boot hang due to missing SOC/IOE SRAM deviceSubrata Banik
The SOC/IOE SRAM device is used to store crash logs. Previously, the crashlog enablement was hardcoded in the baseboard.common module. This commit moves the crashlog enablement logic to the baseboard module, so that it can be enabled or disabled based on the specific baseboard. Additionally, the SOC/IOE SRAM is now enabled by default in the baseboard devicetree.cb file. This prevents the system from hanging if the SOC/IOE SRAM device is not present. BUG=b:262501347 TEST=Able to build and boot google/screebo with this patch. w/o this patch: [ERROR]  SOC SRAM device not found! [ERROR]  IOE SRAM base not valid Change-Id: I02d581e5b62cfa114a3761a9704ad9f24dead8aa Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex/var/ovis: Enable SaGvSubrata Banik
This patch enables SaGv with fixed frequency and gears for Ovis. Restrict memory speed to 6400 MTS as per board design. BUG=b:282164577 TEST=Verified the settings on google/ovis using debug FSP logs Change-Id: Ia9703344a8ae9d2ba44a16c62afab820fd8e2177 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76138 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28mb/google/rex: Set TCC to 90°CSumeet Pawnikar
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit (TCC) activation feature for rex variants. BUG=b:270664854 BRANCH=None TEST=Build FW and test on rex board Change-Id: I0567b6240fcb53f38158c381b700169475cf3795 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76110 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-28mb/google/dedede/var/pirika: Add new Codec ALC5650Daniel_Peng
1.Add Codec ALC5650 setings for drivers/i2c/generic 2.Add option value '3' to AUDIO_CODEC_SOURCE for SSFC BUG=b:284060672 BRANCH=master TEST=emerge-dedede coreboot chromeos-ec chromeos-bootimage Confirm the device is existed on system. Change-Id: I39703a950620c90aa3740b7313b7d32cc68eede4 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75918 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2023-06-28mb/google/hades: Update SD controller from GL9750 to GL9755Eric Lai
Hades uses GL9755 not GL9750. Select the right driver for ASPM. BUG=b:283721798 TEST=check the coreboot log. GL9755: configure ASPM and LTR Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia5b3b17d76f02d5114af24535f9a1eecc14358a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76118 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-27mb/google/hades: select DUMP_SMBIOS_TYPE17Eric Lai
Hades uses DDR5 which can't read SPD from coreboot yet. Use smbios dump to print memory information. TEST=check the coreboot log. memory Channel-0-DIMM-0 type is DDR5 memory part number is MTC8C1084S1SC56BG1 memory max speed is 5600 MT/s memory speed is 5200 MT/s memory size is 16384 MiB Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ica44081228a3a1edc36e2110e84686582fbe8f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-06-26mainboard/google/rex: Enable crashlogPratikkumar Prajapati
Enable crashlog for rex. Select config options SOC_INTEL_CRASHLOG, and SOC_INTEL_IOE_DIE_SUPPORT. Also enable ioe_shared_sram and pmc_shared_sram devices. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: I3d3a9fb41d1293f021ad9de9b29c756cb7559373 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-26mb/google/brya/var/vell: update FW_config to sync config.starShon Wang
We have found inconsistencies in turn of FW_CONFIG settings/definitions, so sync setting to vell config.star BUG=b:282189358 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I676b719ecc711a6f59e76465a3566bf63924d90f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75913 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26mb/google/rex: Avoid LPDDR5/x hangSubrata Banik
This patch avoids random hang issue observed after booted to OS on LPDD5/x platforms due to CLK not tuned properly in SAGV point 0, 2133MT/s. As per Intel doc 769410 the expected work around is to change SAGV point 0 from 2133 G4 to 3200 G4. BUG=b:287170545 TEST=Able to perform 500 power cycles on google/rex without any hang. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I02a9cadc075f396549703d7a008382e76268f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76076 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23soc/intel/jasperlake: Add per-SKU power limitsChia-Ling Hou
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree. BUG=b:281479111 TEST=emerge-dedede coreboot and read correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679 Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Super Ni <super.ni@intel.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-06-23mb/google/rex: Configure ISH GPIO's based on FW_CONFIGBernardo Perez Priego
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled, loaded, and functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I3f0f9a7c8318fa9ae59b6f613eafdacbfa07c749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23soc/intel/meteorlake: Rename shared SRAM aliasesPratikkumar Prajapati
Rename shared SRAM aliases for IOE and PMC to make them more readable. pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram. pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram. Rename them in SOC code as well as mainboard to make sure the patch builds for the relevant boards. BUG=b:262501347 TEST=Able to build. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I02a8cacc075f396549703d7a008382e76258f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23mb/google/rex: Keep CNVi PCI device enabled for OvisSubrata Banik
The CNVi PCI device is required for the system to boot properly. By ensuring that this device is enabled, we can prevent the below error message from appearing and ensure that the system boots successfully. BUG=b:274421383 TEST=Able to build and boot google/ovis without any error. w/o this patch: [ERROR] CNVi WiFi is enabled without CNVi being enabled [ERROR] CNVi BT is enabled without CNVi being enabled Change-Id: I4dbae14f0cfccf96a33437a0e2fdefb508209354 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-22mb/google/brya/acpi: Set polling timing for DL23 and LD23 to 2msTarun Tuli
Reducing the polling time from 16ms to 2ms. Experimentally we have determined that the link state normally takes approximately 3.5ms to update and therefore we were waiting longer than necessary. TEST=build and confirm we are not waiting the extended period. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I8fabb5ac46cae5c92d5b6f1dc0641a4d121c61dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/76052 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-22mb/google/brya/acpi: Set power down delay to 2ms after PEXVDDTarun Tuli
Reduce the delay between PEXVDD and NVVDD from 3ms to 2ms during power down sequences. The hardware discharge is aggressive enough that we can safely optimize this. BUG=b:288267305 TEST=build and measured delay is acceptable Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I7c65301414044487e50bbbca618c4e602e571cfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/76051 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-22mb/google/brya/acpi: Don't wait for PG in GPU off sequencesTarun Tuli
When powering rails down, there is no value in waiting for the PG signal to de-assert. Instead, shut the rails off as quickly as possible while maintaining a controlled ordering. BUG=b:288266850 TEST=build and measured delays are gone Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: If31691a7d62b72661fcbacb34e90f3a6adec8134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76050 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-22mb/google/rex: Disable TCSS config for pre-boot displayKapil Porwal
Pre-boot display is not POR for google/rex hence disable the config ENABLE_TCSS_DISPLAY_DETECTION. BUG=b:247670186 TEST=Build and boot to google/rex and make sure that display over TCSS works in the OS Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ib55e251a4620c7a375ee2f27763154c39207236e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-22mb/google/nissa/var/joxer: Disable GPIOs for SD card readerTerry Chen
the board won’t have a SD card reader, so disable it. BUG=b:285477026 TEST=USE="project_joxer emerge-nissa coreboot" Change-Id: I6a55058b453771d264700a1364ef538f831148e4 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-22vc/amd/fps/phoenix/platform_descriptors: drop logical-physical mappingFelix Held
For Phoenix the lane numbers in the DXIO descriptor match the ones in the schematic, so remove the corresponding text and the table from the comment on the fsp_dxio_descriptor struct. Since there's no logical to physical lane number remapping needed for the lanes in the Phoenix DXIO descriptors, drop the 'logical' from the start_logical_lane and end_logical_lane fields in the DXIO descriptor and rename those to start_lane and end_lane. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94664fd9d3807370b73f9fae8645d444e5faf7b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-21mb/google/rex/var/screebo: set HBR smbus pin as NCSimon Zhou
Since GPP_C03/GPP_04 are floating in HW design, we set HBR smbus pin as NC, in case it prevents ese and cse from entering suspend. BUG=b:283053968 TEST=Verified on screebo non-TBT SKU, suspend and resume works. Change-Id: I401db32f0286de61ce3ab6c61de9528ec76cb51d Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75643 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21mb/google/rex: Fix PLD for USB type-A portKapil Porwal
USB type-A port with same PLD.token information as USB type-C port, causes conflict while generating ACPI code for the EC CONN device. Use a different PLD.token number for type-A port to fix the issue. BUG=b:286328285 TEST=check ACPI can have right USB port in EC CON. before patch: Package (0x02) { "usb2-port", \_SB.PCI0.XHCI.RHUB.HS01 }, Package (0x02) { "usb3-port", \_SB.PCI0.TXHC.RHUB.SS01 }, after patch: Package (0x02) { "usb2-port", \_SB.PCI0.XHCI.RHUB.HS01 }, Package (0x02) { "usb3-port", \_SB.PCI0.TXHC.RHUB.SS03 }, Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: If3e76c11dd6808eee4c9c2f3f71604a60379b5a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-21mb/google/rex/var/ovis: Select SOC_INTEL_METEORLAKE_U_HJakub Czapiga
Ovis uses MTL-H. BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis TEST=cros build-packages --board ovis chromeos-bootimage Change-Id: I284c72b902490187d0b15e4fc81650af1cfa16d7 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75887 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21meteorlake: Rename `SOC_INTEL_METEORLAKE_U_P` as per latest EDSSubrata Banik
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to `SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS version 1.3.1 (doc number: 640228). With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the same package. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-20mb/google/hades: Update typeC usb PLDEric Lai
get_usb_port_references refer the PLD group. If the port assign cross ports like mux[0] use USB3 and mux[1] use USB1, then we need set USB3 to group 1. Update the PLD panel to back as well. BUG=b:286328285 TEST=check ACPI can have right USB port in EC CON. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I97517ecd4f8615af749fb6d007ded8e171796f7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/75912 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-20treewide,intel/skylake: Use boolean type for s0ix_enable dt optionFelix Singer
Using the boolean type and the true/false macros give the reader a better understanding about the option. Thus, use the bool type for the attribute and use the macros for assignments. Skylake mainboards which use that option were changed by the following command ran from the root directory. socs="SOC_INTEL_(SKYLAKE|KABYLAKE|SKYLAKE_LGA1151_V2)" && \ option="s0ix_enable" && \ grep -Er "${socs}" src/mainboard | \ cut -d ':' -f 1 | \ awk -F '[/]' '{print $1"/"$2"/"$3"/"$4}' | \ xargs grep -r "${option}" | \ cut -d ':' -f 1 | \ xargs sed -i'' -e "s/${option}\".*\=.*\"1\"/${option}\" \= true/g" Change-Id: I372dfb65e6bbfc79c3f036ce34bc399875d5ff16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75871 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-06-20mb/google/rex/var/rex0: Configure I2C timing for I2C devicesIvy Jian
Configure I2C0/1/3/4 timing in devicetree to ensure I2C devices meet timing requirement. Note that I2C5 timing will be updated separately when the tuning done BUG=b:280559903 TEST=Build and check I2C devices timing meet spec. | | I2C0-Codec | I2C0-WFC | I2C1 | I2C3 | I2C4 | |-------------|------------|----------|--------|-------|---------| | FSMB(KHz) | 347 | 343.2 | 389.3 | 393.7 | 381.9 | | TLOW(us) | 2.1 | 2.093 | 1.895 | 1.902 | 1.953 | | THIGH(us) | 0.647 | 0.628 | 0.602 | 0.62 | 0.612 | | THD:STA(us) | 0.633 | 0.64 | 0.601 | 0.6 | 0.601 | | TSU:STA(us) | 0.617 | 0.621 | 0.619 | 0.659 | 0.61 | | TSU:STO(us) | 0.656 | 0.647 | 0.667 | 0.727 | 0.634 | | TBUF(us) | 86.15 | >14.088 | >9.833 | >8 | >10.366 | Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I5421e4fe68e856bbe9f19544954a94670c895a47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75150 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-20mb/google/rex/var/screebo: Remove rp2 and add rp1/rp3Rui Zhou
Remove rp2 and add rp1/rp3 for screebo BUG=b:286187816 BRANCH=none TEST=emerge-rex coreboot and verify TBT works. Change-Id: I1013d26c705f2a3f9378d944bd863d94f319d36c Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75832 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-19mb/google/nissa/var/joxer: enable ELAN and G2touch touchscreenMark Hsieh
Update overridetree to support ELAN and G2_G7500 touchscreen. BUG=b:285477026 TEST=emerge-nissa coreboot and check touchscreen function Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I236a2815f956929c6cd84c981cb15e9ab0f657b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75762 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-19soc/intel/apollolake: Switch to snake case for ModPhyIfValueMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'ModPhyIfValue'. Change-Id: I4cdf68e65cea4ab316af969cd6a8d096b456518d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75855 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-19soc/intel/apollolake: Switch to snake case for DisableComplianceModeMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'DisableComplianceMode'. Change-Id: I9d5605134a753f161a66857c7f78844ae7490cd6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-19soc/intel/apollolake: Switch to snake case for PmicPmcIpcCtrlMario Scheithauer
For a unification of the naming convension, change from pascal case to snake case style for parameter 'PmicPmcIpcCtrl'. Change-Id: I3632d1e83108221d3487b4f175133ad347238bc5 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75853 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-18mb/google/rex/variants/ovis: Add display configurationJakub Czapiga
Enable DDI on ports 1 to 4 for Type-C DisplayPort. BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis Change-Id: I40f967b12b11c10a1a9329bfb42ebec5a8d7738f Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75579 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-17mb/google/rex: Set AUX orientation at SoC to follow cable for anx7452Caveh Jalali
This configures the SoC to flip the orientation of the AUX pins to follow the orientation of the cable when using the anx7452 retimer. This is necessary when there is no external retimer/mux or the retimer/mux does not implement the flip. The anx7452 retimer does not appear to support this feature, so let the SoC do the flip. BUG=b:267589042,b:281006910 TEST=verified DP-ALT mode works on rex using both cable orientations Change-Id: Ibb9f442d2afd81fb5dde4bca97c15457837f9f4a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75827 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 15:03:14 +0000