| Age | Commit message (Collapse) | Author |
|---|
|
This change adds mem_parts_uesd.txt that contains the new memory parts
used (H54G46CYRBX267,H54G56CYRBX247) by primus and Makefile.inc
generated by gen_part_id using mem_parts_used.txt.
BUG=b:218415732
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I0d236c51f0c996a22954046876f3494ba9e62693
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
makefile variables
Currently apu/amdfw_a-position and apu/amdfw_b-position currently depend on CEZANNE_FW_A_POSITION and CEZANNE_FW_B_POSITION. This causes error messages from awk as these variables are sourced from fmap_config.h and these variables are expanded before fmap_config.h is built. However these variables should not be set to CEZANNE_FW_*_POSITION. These files end up in the FW_MAIN_* fmap regions. These regions are placed at the proper locations through the chromeos.fmd file. The apu/amdfw_*-position variables are the positions within these regions where the files end up. These variables should be set to 0x40 to coincide with the beginning of the FW_MAIN_* regions, accounting for the size of struct cbfs_file + filename + metadata, aligned to 64 bytes. Currently they end up in the correct locations only because fmap_config.h does not exist when the apu/amdfw_*-position variables are expanded.
This change explicity sets the value of these variables to 0x40, removing the errors from awk and ensuring that these files end up in the correct location in the resulting image. These changes are also applied to the Picasso and Sabrina makefiles as well.
BUG=b:198322933
TEST=Verified that the apu/amdfw_* files end up in the correct locations as reported by cbfstool during the build, did timeless builds and confirmed that coreboot.rom images were identical, tested AP firmware on guybrush and zork devices
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: If1c2b61c5be0bcab52e19349dacbcc391e8aa909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Nissa is using the FM101, which has the following power sequencing
requirements:
Power on: assert WWAN_EN, delay 20 ms, deassert WWAN_RST_L
Power off: assert WWAN_RST_L, delay 20 ms, deassert WWAN_EN
Add a power resource to the USB device, and use wwan_power.asl to
handle the power off sequence.
BUG=b:217092522
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ibe1b863a550c6af1ac3eb98f2aaa3db15b149ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Nissa is using the FM101 which is USB only. To allow us to reuse the
existing wwan_power.asl for power sequencing, move the PCIe-specific
part behind a new Kconfig HAVE_PCIE_WWAN.
BUG=b:217092522
TEST=Build brya0 and check that generated dsdt.asl doesn't change.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Icb6db91ce00deb2b30379f5ff7a974d1feb62ea8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
If the LTE USB DB is not connected, disable the LTE-related GPIOs.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I86251d8ad58d82ff2112ac5f2dfafdabbff4c76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add an initial overridetree for nivviks based on the pre-proto schematic
and build matrix.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Id3ecd184415a20a3a52da8bb5e60fe2ce0495b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
The SMMSTORE region needs to be 64K aligned or error will be thrown.
Change-Id: I5d4f71f80c3219ac2c7000e1fa95fd04100d9cfe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Adjust Kconfig so all variants use proper VBTs.
Add Makefile entries for variants which use multiple VBTs.
extracted from ChromeOS firmwares:
Google_Coral.10068.113.0
Google_Pyro.9042.233.0
Google_Reef.9042.233.0
Google_Sand.9042.220.0
Google_Snappy.9042.253.0
Change-Id: I46ad4ec321e32d019e44f0741956b18a464fb8ae
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Drop unnecessary switch break after return, to alleviate linter warnings.
Change-Id: I7cc49caaeafb490cb62b75ec5c3ca4822573464b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Several commits were made to the Chromium coral branch
(firmware-coral-10068.B) which were not committed upstream first.
Pull them in here:
486ce56 mainboard/google/coral: Override VBT selection for babymako
c1d7720 Babymako: add touchpad i2c speed config
911d547 mainboard/google/coral: Override VBT selection for babytiger
730a5af Babytiger: add touchpad i2c speed config
724711e rabbid: add the touchpad i2c speed config
80c5d16 mainboard/google/coral: Override VBT selection for babymega
e8931a4 Babymega: add touchpad i2c speed config
These add support for additional coral sub-variants. The I2C speed config
changes were adapted to account for upstream changes not present in the
coral Chromium branch.
Change-Id: Idf2a53a351138aff310385f4026197d74ab6848b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Release firmware on Nasher/Nasher360 are built as coral
sub-variants; remove the old/unused code
Change-Id: Ie8d10a31e663230b7deabf92e1c06cd991bbdccb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Create the moli variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:214439135
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_MOLI
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I3f3bfd3db12cba8b73b351e7c700b6a58797c906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Add wifi sar for magneto.
Due to fw-config cannot distinguish between magolor and magneto.
Using sku_id to decide to load magneto custom wifi sar.
BUG=b:208261420
TEST= emerge-dedede coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I77f141372ba8e7b8f5849b00e115ad8bb1e7ca00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different _HID
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:204517112
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I5c1c9819af1e0bc2278dadeffb6b19c3f9068f30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different _HID
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:218245715
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I081dcf5451c82c03592f954ee25267b31ad81753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
use DEV_PTR to get codec HID for simplify the variant.c code
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:204523176
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Idf5b3661e74a189390d25381e03448c28a966f38
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61671
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add fw_config NAU88L25B_I2S field, I2S2 configuration and
enabling CnviBtAudioOffload UPD bit.
BUG=none
TEST=temerge-brask coreboot
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Change-Id: Id5da8c5c471be176bc0fe1eda4da7faf8ed2e8d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61404
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
volmar boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I36355af771fbf97e655f2fd6e0505c657e0420b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
vell boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I0c39d06e3b2f39db88d924205786bfa1b27df3fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taniks boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icf6cb0d057f9ad3cbcc1155423ed7efa58a46d0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taeko4es boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I82bdf8a1bfe2df0fc1d50d154def8742714321ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
taeko boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib30815dbe99342b6afd9af9f1aa9ff61c9a4fe80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
redrix boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifd69a9c2f1a71aefc19adf6931e10de62d05fb2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
redrix boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If08ae5c96232efd03d77090c3c6979c77f95c998
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
primus boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I71f7391df6d827b75f87e54e17f6f7983a9e829b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
primus boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I3133a992617c833fd13df97795c46ec04ebb8bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
kano boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1d8c003b19381e6a76aff8c844546694c5710e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
gimble boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If71ceb07a9894a0571a9983d008058598693986f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
gimble boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Idd398d819dcb30a3ec588ce2ef4562a728f99405
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
felwinter boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ic1e0bfc53b74bd5af9ac8d598bb80833499dd997
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage'
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Id5a2136e57e842fbd0b2c2836833106e7344afee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
Also fix the gpio order of GPP_F19.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
anahera4es boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9a73aca1c364dcbc3f3957cd4193d86f399a40bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
Also fix the gpio order of GPP_F19.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
anahera boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ie50ba20a10ded184fd880be9ed288b90d346c22b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Variant should honor locked gpios from baseboard, but not the last.
Variant can add more gpios to lock if needed.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
agah boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia9272f704e5656e6d0dc318dd1b51d50fc549839
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add rest of soc sensitive gpios to lock for brask.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brask boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Iad87d13d3df0ad87c075027e3fcc4c75aa711159
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add rest of soc sensitive gpios to lock for brya.
BUG=b:216583542
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I41393e7a0e8bacb3cc98610f7101dabe66308f94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The ChromiumOS kernel has the ability to restrict devices to their own
IOMMU security domains when ACPI passes this property to a device
downstream of a PCIe RP.
BUG=b:215424986
TEST=verified the property is found and WWAN is restricted to its own
IOMMU domain as expected.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I1717c0976d1d961772245fd420368fe5a9c1262e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable USB Port A on daughterboard for Taeko
BUG=b:216533764
TEST=emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I1a43c256757f3fc4b53ba1f794587d6a00ba0aa5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:192535692
BRANCH=volteer
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ia6089441dc1ba04c3f7427dda065b85bd295af0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mac Chiang <mac.chiang@intel.com>
|
|
1. Enable RTD3 driver for PCIe-eMMC bridge
2. Add fw_config entries for boot device.
BUG=b:211362308
TEST=Build and boot into eMMC storage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ic9ef372fa963b040c5196aaf13f2ffde27c168d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch selects USB2_PORT_MAX_TYPE_C macro for usb2 port#2 in
the device tree of Gimble DVT and Gimble EVT. The macro modifies the
USB2 configuration to indicate the port is mapped to Type-C and sets
Max TX and Pre-emp settings.
The change is required to enable port reset event on the USB2 port#2.
This event is passed to USB3 upstream ports to upgrade back to super
speed (USB3) after a downgrade during low power state. The change is
done for Gimble DVT and EVT boards.
BUG=b:193287279
TEST=Built coreboot for Gimble and tested type A pen drive detect as
super speed device on both the Type-C ports.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If54faa63a983c859bf26a6a779751a6c3c85c43d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61586
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nivviks P1 will also use Micron MT62F512M32D2DR-031 WT:B. Add it to the
parts list and regenerate the memory IDs using part_id_gen.
BUG=b:217095281
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I2b56b0844e70a2712923b197436dd2d668e58a27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: If610e6b3c849d982345ed1b8607ffd2af105dc51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Add WiFi SAR table for taeko.
BUG=b:212405459
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I061dc798ae7177d05bc50648cfda46a3eec2c912
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Trackpad GPIO configuration does not align with the IRQ configuration
in the devicetree. Configure the trackpad GPIO to generate SCI on
falling edge.
BUG=None
TEST=Build and boot to OS in Nipperkin. Ensure the trackpad is
functional. Suspend the device and wake it using trackpad. Perform
suspend/resume sequence for 100 iterations.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: If4324e09535d2676c8a8c6643604227eeaba0fe8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
For USB ports, we want to use custom PLD fields with more details to
indicate physical location. Custom PLD will also be added to other brya
variants in the future as we figure out physical port locations on those
devices. Type A port on MLB is removed since it is no longer used.
BUG=b:216490477
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Iea975a4f436a204d4edd19fad0f5652fb44c6301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This will make debugging boot failures with a non-serial firmware
easier. If we encounter an error that requires a reboot, this will dump
the entire CBMEM contents onto the UART. This is especially helpful
during S0i3 resume because the PSP verstage console logs are not
exposed anywhere.
BUG=b:215599230
TEST=Cause verstage error in S0i3 with non-serial firmware and see that
the verstage logs were dumped to the UART before rebooting.
Entering PSP verstage S0i3 resume
tpm_setup failed rv:1
VB2:vb2api_fail() Need recovery, reason: 0x3f / 0xcc
Saving nvdata
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I908037527206cc7bed2302fab60b2912d6dabc73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ic42d5c05938c060ccaa7b1a260cd584b6e1bb1f3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Now that the console system itself will clearly differentiate loglevels,
it is no longer necessary to explicitly add "ERROR: " in front of every
BIOS_ERR message to help it stand out more (and allow automated tooling
to grep for it). Removing all these extra .rodata characters should save
us a nice little amount of binary size.
This patch was created by running
find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';'
and doing some cursory review/cleanup on the result. Then doing the same
thing for BIOS_WARN with
's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi'
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Add FM350GL 5G WWAN support using drivers/wwan/fm and addtional PM
features from RTD3.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I6413f106ce6ef6c895d4861f4dbe26ac9a507d25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change adjusts I2C3 speed to lower then 400KHz.
BUG=b:215095284
BRANCH=None
TEST=built and verified adjusted I2C3 speed < 400KHz
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ief6773bc37931a5393b5b1b8beaeda61d235f133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
- Set FastPkgCRampDisable VCCIA and VCCGT to 1
BUG=b:201818726
TEST=build FW and system power on.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I881ded944530b21d1c5e306089d32387c9c258b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
- set GPSE-77 (Maxim jack detect) to NC for variants using Realtek audio
- set GPSW-37 to NC for all variants (not used for LPE audio)
- set GPSW-95 (Realtek jack detect) to NC for variant using Maxim audio
- set GPSE-77 as maskable on variant using Maxim audio, to match mask setting
for jack detect GPIO on other variants
- set GPSE-81 as maskable on CELES to prevent interrupt storm (likely due to
change in cherryview pinctrl driver circa kernel v3.18 which no longer masks
all interrupts at init)
Change-Id: I50d4b3516eba8906042bb8dea768b229afcf11ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar Organization <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Extracted from firmware image:
bios-karma.ro-11343-22-0.rw-11343-22-0.bin
Change-Id: Ic4165523a9114f748174c272ee206dfea80f4541
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add ID "AMDI5619" for machine driver to support ALC5682I-VS + ACL1019
combination.
BUG=b:211835769
TEST=Build dewatt, codec is functional with new machine driver.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic6cb3bda7b8f1b96485f7b868200c94e6c720c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com>
|
|
Fill in devicetree for nissa baseboard based on schematics.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
TEST=abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6cd332fd05fde19078ebc4bd2797580abfb76f3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The CNVi Wifi controller is considered an untrusted device for ChromeOS,
therefore enable the new UntrustedDevice property for the cnvi_wifi
device on all brya & brask boards.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: Ieff6eea0865125a7c0f626e1981dda1c9532ebb1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Redefine Hoglin to be used for Qualcomm's CRD 3.0 board, which uses
i2c for TPM instead of SPI. From now on, the Piglin board will be
used for all the Qualcomm reference boards that use SPI for TPM.
BUG=b:206581077
BRANCH=None
TEST=hacked an 8MB image and make sure boots on herobrine board
Change-Id: Ie1d71ec8b01f305c1c8fa815a0fb9b7ee022cc19
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Skyrim is a new Google mainboard with AMD Sabrina SOC.
BUG=b:214413553
TEST=util/abuild/abuild -t GOOGLE_SKYRIM --clean
Change-Id: I008fea4aa163b8aa66e86735b29b3fdc4e08a327
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
The I2C pad control registers of Picasso and Cezanne are identical and
the one of Sabrina is a superset of it, so factor out the functionality.
To avoid having devicetree settings that contain raw register bits, the
i2c_pad_control struct is introduced and used. The old Picasso code for
this had the RX level hard-coded for 3.3V I2C interfaces, so keep it
this way in this patch but add a TODO for future improvements.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With the APCB edit tool enabled in commit 6a3ecc5 (guybrush: Inject
SPDs into APCB), DeWatt and Nipperkin can have independent
mem_parts_used tables. Copied common table from guybrush and
ran part_id_gen to make sure it's synced to latest.
BUG=b:209486191
BRANCH=guybrush
TEST=Boot on nipperkin
Change-Id: Id30b596c2466902dfcc59dcc88dcaa00748a3949
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Gimble does not use WWAN and TCP Port 1 according to the schematics.
Hence disabling it.
BUG=b:216533766
TEST=Boot to kernel and verify WWAN and TCSS Port 1 disabled
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
change-Id: I0e7ae72620da39fc18ff253c440d006e83c576f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ib49164cf51965228c65c6566b0711ae690b6cb50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
In the nivviks and nereid pre-proto builds, the memory straps used
don't match those generated by spd_tools. Each pre-proto build only
supports a single memory part, and each of these parts should have ID 0
(see CB:61443). Therefore, for nivviks and nereid board ID 0, hard code
the memory IDs to 0 instead of reading them from the memory strap pins.
From P1 onwards, the memory straps will be assigned based on the IDs
generated by spd_tools.
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ic0c6f3f22d7a94f9eed44e736308e5ac4157163d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add a mem_parts_used.txt for each of nivviks and nereid, containing the
memory parts used in their pre-proto builds. Generate Makefile.inc and
dram_id.generated.txt using part_id_gen.
nivviks:
Micron MT62F1G32D4DR-031 WT:B
nereid:
Samsung K3LKBKB0BM-MGCP
BUG=b:197479026
TEST=Build nivviks and nereid. Use cbfstool to check that coreboot.rom
contains an spd.bin.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ia3e5ee22199371980d3c1bf85e95e067d3c73e67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I322a94569d8a63e8c0da68a8feb394ade4ce7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Fill in the memory config based on the the schematic and doc #573387.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I6958c7b74851879dbea41d181ef8f1282bf0101d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7ec4b9368e0a63c0c0c9a92c8367a89d57f10d51
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Nissa doesn't have a SLP_S0_GATE signal, so we shouldn't generate the
related ACPI code. Therefore, move this behind a Kconfig which is
currently selected by the brya and brask baseboards.
BUG=b:197479026
TEST=Build brya0, check that there's no change to the generated dsdt.asl
Change-Id: I5a73c6794f6d3977cbff47aeff571154e41944cc
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the nissa baseboard GPIO table based on the nivviks P0 and
nereid P0 schematics. Also, add an override GPIO table for each of
nivviks and nereid.
The differences between nivviks and nereid are:
- WFC: nivviks has a MIPI WFC and nereid has a USB WFC, so the
MIPI-related pins are overriden to NC on nereid.
- The DMIC pins and speaker I2S pins were swapped after nivviks P0. The
baseboard reflects the new configuration, which will be used in
nivviks P1 onwards, nereid, and future variants. For now, nivviks
overrides the pins to the old configuration. Once nivviks P1 is
released, this will need to be updated to handle both.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: Ic923fd22abcaf7da0c607f66705a6e16c14cf8f2
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Let's re-enable PSP post codes when running PSP verstage. The original
reason we disabled POST codes was that it was causing problems during
eSPI init in bootblock. Since we now init eSPI in PSP verstage, it's
safe to re-enable them. We can now see post codes during S0i3 enter and
exit. This will help when debugging resume or suspend hangs.
Port 80 writes on suspend:
ef000020 ef00ed00 ef00ed01 ef000021 <--new
Port 80 writes on resume:
05 eea80025 eea90000 eea90100 eea90200 eea50000 eeae0000 eeae0004 eeaf0000 eeb00000 eec00000 eec00100 eec10000 eec40000 eec40500 eec40200 eefc0000 eefc0100 eec50000 ea00e0fc
ea00abc1 ea00e60b ea00e60c ea00abe1 ea00abe2 ea00abe4 ea00abe5 ea00abeb ea00abec ea00abed ea00abee ea00abef ea00e10f ea00e098 ea00e099 ea00abf0 ea00abf2 ea00e10e ea00e60c ea00e101
ea00e090 ea00e091 ea00e098 ea00e099 ea00e098 ea00e099 ea00e100 ea00e60c ea00e0b0 ea00e0b4 ea00e0b7 ea00e60c ea00e0c2 ea00e0c4 ea00e0d3 ea00e60c ea00e10d ea00e0c1 ea00e10c ea00e60c
ea00e0c4 e000 eec60000 eec20000 eec20800 b40000 eeb50000 eefc0000 eefc0300 ee070000 eed90000 eed90700 eeda0600 eedd0000 eecb0000 eecf0000 eecf0200 eee30000 eee30900 eee40000
ef000025
BUG=b:215425753
TEST=Boot/suspend/resume guybrush and verify post codes are printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie759f66be2b8ffac19145491a227752d4762a5b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch enables SaGv since somehow it was accidently removed
by commit a52b9c3.
BUG=b:208719081
TEST=FW_NAME=vell emerge-brya coreboot
Fixes:a52b9c3 ("mb/google/brya: Move gpio_pm settings for brya
variants to baseboards")
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ideae3dbd9746590db104d93afadbd8d574298b83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch removes `lockable_brya_gpios` lists and
`mb_gpio_lock_config` override function from brya baseboard directory as
the variant GPIO pad configuration table is now capable of locking GPIO
PADs.
BUG=b:208827718
TEST=Able to built and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifc7354f2ae3817459b5494d572c603eba48ec66a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the FPMCU SPI and IRQ GPIOs
for all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests `FPMCU_*`
(F11-F13 and F15-F16) are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1d0b8a5aed6ea54bcfaa267cae5ca78595396ce5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the PCH write protect GPIO for
all brya and brask variants.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia125c513c09ecbb1047100e72f8540369646988e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM IRQ pins for all brya
and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
GSC_PCH_INT_ODL is locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icfc251152278c59f9a94b84fcd8c6d36c26bff62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM I2C and IRQ GPIO for
all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use PAD config macro to add lock support for all the gpios used
in CB:58352 CB:58353.
BUG=b:211573253
TEST=Boot to OS, issue warm reboot and see no issue with any IP
enumeration
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I558bab39f935ab31a89541c6498a73af70cbf9ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Samsung K4U6E3S4AA-MGCR
BUG=b:214460184
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ief75fcb7a8f1c25feaf05b1535a9528a351b23b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Galtic has a rare stability issue.
The symptom is display black screen while switching to secure mode,
normally it will occurred at the last step of factory side
and it'll follow by some specific SOCs.
Slowing the initial core display clock frequency down to 172.8 MHz
as per Intel recommend for short term solution for Gal series.
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for Galtic.
BUG=b:206557434
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic059ab306f80a6d01f4b0a380a3b767d3245478d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61103
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `DISABLE_HECI1_AT_PRE_BOOT`.
Change-Id: I7d447e73f672877c76eecea1eb8b8f41f89ce686
Fixes: commit a0d9ad322fe603d4d4cbccda9c7edcfbf0b13409
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`.
Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99
Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Based on the agah schematic, add memory settings.
BUG=b:215662929
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib45241d708d025ca75ed06e2bcf3997558723a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the crota variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:215443524
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CROTA
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ic8f1a0bde286d5d014dfdf87c2a417ca6ff8b3a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
For one specific type of APU, it doesn't have HDMI. When we detect
this APU, we need to explicitly disable HDMI in DDI settings,
otherwise the system would freeze.
Please refer
src/mainboard/google/guybrush/variants/dewatt/variant.c
BUG=b:215432928
Change-Id: I93fca8cf9870533da1bcca5fa28ff22085e65beb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To timely update stylus charging status (b:206012072), PCHG device
events have been moved to MKBP. This patch registers the MKPB host
event as a wake-up signal to match the change.
EC filters other EC_MKBP_EVENT_* events (chromium:3413180).
BUG=b:205675485,b:206012072
Cq-Depend: chromium:3413180
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: Ie4536b2c0ccc37f92dfa940c5a5712340a32c82c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add senor board to QUP FW load for: APPS I2C, ESIM SPI & fingerprint SPI.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add supported memory parts in "mem_parts_used.txt" and generate
the SPD ID 0x04 for the parts.
Shuboz memory table as follow:
value Vendor Part number
0000 MICRON MT40A512M16TB-062E:J
0001 HYNIX H5AN8G6NCJR-XNC
0010 MICRON MT40A1G16KD-062E:E
0011 SAMSUNG K4AAG165WA-BCWE
0100 MICRON MT40A512M16TB-062E:R
BUG=b:216571906
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is intended for Chrome microchip ECs
only, which have different requirements as to the amount of memory
mapped space they can claim. The brya family of boards does not use
any microchip ECs, therefore remove this Kconfig.
BUG=b:214460174
TEST=boot brya4es to kernel, no EC errors seen in cbmem log, EC software
sync still works.
Change-Id: I6e9858f29d079140ec43341de90f222b03986edb
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO
from the PCH. The current power sequence does not take this into
account, and this leads to an unbalanced ref count of the reset GPIO,
which can cause one or the other of the devices to reset unexpectedly.
This patch corrects that by explicitly sequencing the reset GPIO for
both devices, which the builtin refcounting of this driver will
automatically handle.
BUG=b:214665783
TEST=Build, boot to OS and check VCM once camera stream off
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some SKUs of google/taniks have a Bayhub LV2 card reader chip,
therefore enable the corresponding driver for the mainboard.
BUG=b:215487382
TEST=Build FW and checking SD card reader register is correct.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I34adb122bd2edc343e894a53bc12e105f4225984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
0x18 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x19 HYNIX 4GB LP4X H54G56CYRBX247
0x1a SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x1b HYNIX 8GB LP4X H54G68CYRBX248
BUG=b:165768895
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Change-Id: Ib1c09ff2b88bf121de702985680b2388c0fb8427
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add a dedicated memory mapping table starting at index 0x40:
0x40 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCR
0x41 HYNIX 4GB QDP LP4X H9HCNNNCPMALHR-NEE
0x42 MICRON 4GB LP4X MT53E1G32D4NQ-046 WT:E
0x43 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:A
0x44 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B
0x45 HYNIX 4GB LP4X H54G56CYRBX247
0x46 SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL
0x48 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCL
0x49 MICRON 8GB LP4X MT53E2G32D4NQ-046 WT:A
0x4A HYNIX 4GB QDP LP4X H9HCNNNCPMMLXR-NEE
0x4B Micron MT29VZZZAD9GQFSM
BUG=b:162379736
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I97f296cb8c35fd2f979a05d0b97a0562c1b472f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
When using the default initial core display clock frequency, Metaknight
has a rare stability issue where the startup of Chrome OS in secure mode
may hang. Slowing the initial core display clock frequency down to
172.8 MHz as per Intel recommendation avoids this problem.
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for metaknight.
BUG=None
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Init basic override devicetree based on schematics
BUG=b:211891086
TEST=FW_NAME="volmar" emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I40b364e3df2f04a6b828f4f288667b96b6e0bd22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:214890058
BRANCH=None
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I86acb172ed427d45973b9360e0413978cbd46645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new ram_id:1100 for memory part K4AAG165WB-BCWE.
BUG=b:212507858
TEST=Generate new spd file and build coreboot.
Then boot from the DUT with new memory K4AAG165WB-BCWE
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This reverts commit 2bf2e6d1ccd87cdd8d9c189972eae89e47e542c8.
According to the latest schematics, Brask supports D3-Hot for RTL8125
and does not need to operate the ISOLATE pin.
BUG=b:193750191
BRANCH=None
TEST=emerge-brask coreboot chromeos-bootimage
Test with command suspend_stress_test
Change-Id: Ica6bfb810887861f6b17ff527373824547e2406c
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set register "reset_delay_ms" to 20 to reduce power resume time.
BUG=b:204009580
TEST=tested on kano
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0695edd7c342c65df9138b1590281c5f442769b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
