| Age | Commit message (Collapse) | Author |
|---|
|
There is a problem of screen shake on the old panel[1]. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code is
mainly adjusted for GOP timing. When Display sleep in, raise all GOP
signals to VGHO and then drop to GND. In order to be consistent with
the current panel model, let's rename this file.
[1]: INX old panel product number is HJ110IZ-01A-B1, and the new
panel product number is HJ110IZ-01A-B2. We have recalled the shipment
old panel.
BUG=b:270276344
BRANCH=trogdor
TEST= test firmware display pass
Change-Id: I2b2534afee1ed700c39d3c360aafd685b63ccbfb
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch updates the Type-C USB2/3 port mapping to reflect the mux
connection change as mentioned in previous patch
commit ee3f796200bf3baf8a1906 (mb/google/rex/var/ovis: Fix mux
change as per schematics).
Here is the correct port mapping after considering the mux swap:
+--------------------------------+-------------+---------------+
| TCSS-USB Mapping | Port C0 | Port C1 | Port C2 |
+------------------+-------------+-------------+---------------+
| USB2-Port | 2 | 3 | 1 |
| USB3-Port | 0 | 2 | 1 |
+------------------+-------------+-------------+---------------+
BUG=b:289300284
TEST=Able to build and boot google/ovis to get display over Type-C1
and Type-C2 port.
Change-Id: I460004842dd8fcdc03fca6639d03e422259380ca
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76464
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change SD_CLKREQ_ODL from GPP_D19 to GPP_D18
BUG=b:291051683
BRANCH=none
TEST=emerge-rex coreboot
Change-Id: Ic102e42482328580c5334e6ff036b774f5002e00
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76565
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:284192689
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: Ic177c5ffcb6a3d3f76292a0d99ab0e806d43fc11
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76549
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable CsPiStartHighinEct to fix MRC Cache fail issue
BUG=b:279835630
BRANCH=none
TEST=Pass MRC Cache test with toolkit 1000 times
Change-Id: I25cd856785bab9c661e30e2987b43f0dc2ba9564
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to Intel doc#763797 to overcome early command training hang
issue, the CsPiStartHighinEct needs to be enabled for hynix memory.
BUG=b:281643325
BRANCH=firmware-brya-14505.B
TEST=Built and booted into OS.
Change-Id: I95702e675fa3b73c7e8ee0c8625c7828d8129ea8
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76355
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:290876132
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Change-Id: Id5e0ba7a4ca57e311465ba8e74105f5ee7b8ee8a
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76435
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use fw_config to separate pujjoteen5 intel wifi sar table.
BUG=b:279984381
Test=emerge-nissa coreboot
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I2e744bf0801bd7b18817a00fcbe3d0c62b8fc3d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76453
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add an initial overridetree for gothrax based on the schematic.
BUG=b:274707912
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: Idfd9788a75f9c342f85d6e1a3d54327d64797dd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76013
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drivers for Pen Garage/SDCard Reader/LTE/SAR/WWAN and I2C for TPM.
BUG=b:274707912
BRANCH=None
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I1203ca13bd55b8ab96ce5d323a36ffde06860fa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76104
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
|
|
Change i2c[0] parameter Thd:dat = 50ns;
Change i2c[1] parameter Thd:dat = 100ns;
BUG=b:287898252
BRANCH=none
TEST=Test success by EE.
Change-Id: Ibdbe4e17cf21c914b48fa6dc7d3eecf8218a2d8b
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76430
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables early EC sync to avoid an idle delay (~3sec)
without a provision to notify the user about some critical task
in progress.
Doing EC sync at later stage allows us to notify using graphical msg
on screen to make user aware of the WIP task.
BUG=b:279944831
TEST=Able to perform EC sync from depthcharge on google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I03ed40827c50e75ceaaf94e30d675014ebf22dac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change touchscreen reset_gpio GPP_C01 -> GPP_D07;
Change touchscreen enable_gpio GPP_C00 -> GPP_B17.
BUG=b:289425753
BRANCH=none
TEST=Test success by EE.
Change-Id: I7be6a2b4e87126b281f138c819d2a0a5b1af5821
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the craaskov variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:290248526
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CRAASKOV
Change-Id: I1d12f7c3d0ef7067f4530c1c69c560f9a83561f6
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Add karis supported memory parts in mem_parts_used.txt, generate
SPD id.
1. MICRON MT62F1G32D2DS-023 WT:B
2. HYNIX H9JCNNNBK3MLYR-N6E
3. HYNIX H58G56BK8BX068
4. SAMSUNG K3KL8L80CM-MGCT
BUG=b:291018417
TEST=Use part_id_gen to generate related settings
Change-Id: I87c2c4f59454dec84d29590ee91379c9fa60ddcf
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76443
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PRESERVE flag in the FMD file tells futility not to erase the
fmap partition when updating the firmware. Because of an issue on
myst right now, we want the RW_MRC_CACHE partition to be erased
when the firmware is updated.
BUG=b:290763369
TEST=None
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id586ae057b2fd6d513ddbba5e1284dea39467d95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76478
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use the proper dxio_link_hotplug_type enum values for the link_hotplug
field in the DXIO descriptors to replace the magic values in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieb1513737e6022a668287dc80a39d96cda2b18d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76439
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It moves cr50_plat_irq_status() to common code and adds Kconfig
option to specify GPIO used for interrupt.
BUG=b:277787305
TEST=Build all affected platform and confirm using right GPIO
number. Tested on Skyrim.
Change-Id: I775c4e24cffee99b6ac3e05b58a75425029a86c8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75621
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=b:286803481
TEST=Make screebo suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: I7fd342e52fa0f9126eab4c857a5adc04c26e49c6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76406
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pujjo support WWAN EM060 device, use FW_CONFIG to handle the
power on sequence.
BUG=b:290709711
TEST=Build and check WWAN EM060 power on sequence.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I66800c75274e8e1e55d4314c82b7fcdf2a4477bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76403
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify reset_delay_ms from 300ms to 6ms for ELAN EKTH7D18.
BUG=b:285999032
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and touchscreen is workable.
Change-Id: Iffcddbe7735b7a837887dec68e1270c2af5f4556
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76417
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables PCH to CPU energy report feature which can be used
by Intel Telemetry Driver.
BUG=b:269563588
TEST=Able to build and boot google/rex and perform below check to ensure
the energy reporting is correct
w/o this cl:
# lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXX0000
w/ this cl:
#lspci -s 00:14.2 -vvv | grep "Region 0"
Region 0: Memory at 957f8000 (64-bit, non-prefetchable) [size=16K]
# iotools mmio_read32 0x957f8068 #i.e., 104th offset
0xXXXXfc004
Change-Id: I9bd4625ea311a05071878aaec68433a1ba018c0d
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76353
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The CB:76219 removed mtk_i2c_bus_init() from tps65132s_setup(), so
we should initialize I2C bus for TPS65132 in mainboard now.
BUG=None
TEST=./util/abuild/abuild -t google/geralt -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Iacf78221d2416f41467c709402b7e02e03dc5fc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There is no PCH FIVR participant on MTL and we should remove it
in Rex.
TEST=compile ok and make sure there no TPCH device in acpi
BUG=b:290322310
Change-Id: Icf4be86da3f3cb9b1f0a3f2586b029a533c3e6a9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76402
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
for saving boot time, change ramstage compression from LZMA to LZ4.
Boot time saving is around 35ms (30-37ms) while SPI size impact is 230KB.
For detail, refer below.
Existing: LZMA(55.6 ms)
8:starting to load ramstage 894,519 (0)
15:starting LZMA decompress (ignore for x86) 903,556 (9,036)
16:finished LZMA decompress (ignore for x86) 949,997 (46,441)
9:finished loading ramstage 950,179 (182)
Changed: LZ4(17.8ms)
8:starting to load ramstage 900,876 (0)
17:starting LZ4 decompress (ignore for x86) 917,650 (16,774)
18:finished LZ4 decompress (ignore for x86) 918,690 (1,040)
9:finished loading ramstage 918,849 (158)
Size impact (73KB * 3 = 219KB)
fallback/ramstage 0x62940 stage 240281 LZ4 (405524 decompressed)
fallback/ramstage 0x62940 stage 165452 LZMA (405524 decompressed)
BUG=b:286930648
TEST= Boot to OS and check boot time
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I6610f405d287bff2eb4eee6f09026e3361405ded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi to function properly with the connected bluetooth devices and
wake up from low power state.
BUG=None
TEST=None
Change-Id: I977493fd95a99381279f5a3f5e679e4893369b8a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
|
|
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=None
TEST=Make rex platform suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: Ia98abde584699fa01acba47a9df4ef6332ac16fd
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76338
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The actual NVM size of camera module is 64KB; however, only 8KB is in
use to store data. This reduces the size of both NVM0 and NVM1 to 8KB
to minimize the time taken to read NVM and launch Camera preview.
BUG=NONE
TEST=Launch Chrome camera application and check the time taken to
read eeprom from camera service log and show camera preview. It takes
2 to 3 seconds to show camera preview while it takes 4 to 5 seconds
without the changes.
Before the changes:
06:21:04.204944Z OpenDevice(): camera_id = 1
06:21:07.297584Z Read camera eeprom from eeprom
06:21:08.763491Z Read camera eeprom from nvmem
After the changes:
21:37:23.923676Z OpenDevice(): camera_id = 1
21:37:24.386020Z Read camera eeprom from eeprom
21:37:24.574515Z Read camera eeprom from nvmem
Change-Id: I0e2272b3307fea60ea7406fc6899ae2cb0134fa3
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76189
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update eMMC DLL tuning values for improved initialization reliability
BUG=b:289763421
TEST=cold reboot stress test over 5000 cycles on Foresee and Kingston
eMMC
Change-Id: I63077b8717feecf3d50507abb188b7fadb5d6c79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76221
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch skips reading the MEM_CH_SEL GPIO aka GPP_E13 to determine
the memory channel configuration. The signal behavior is not proper,
hence limiting the DIMM capacity to half (only MC0 is enabled).
This patch always reports the full memory capacity as in dual channel
(both MC0 and MC1 enabled).
This change is necessary to ensure that the system reports the correct
memory capacity, even if the MEM_CH_SEL GPIO is not working properly.
BUG=b:290174538
TEST=Able to detect 32GB memory capacity while booting google/ovis.
Without this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 16183080 kB
With this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 32673664 kB
Change-Id: I6c3fa941abb044b79b13785f7b65d09957f0487d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76359
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Since multiple GFX entry causes an ACPI error when trying to write _DOD
method multiple times, combine the GFX entry into one so that _DOD
method is written just once.
BUG=b:289854155
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I22ad70d50f1aecf8da70e8dd04a36a0a7c1c7609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76329
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This CL corrects the trigger for HID over SPI from Level to Edge.
BUG:None
TEST:Tested with I2C and SPI
Change-Id: I78937af22df22d80a702477b6790a7aa40d782a4
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76116
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The AW37503 is designed to supply positive/negative supply for driving
the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we
need to program the registers at boot. We program the target
positive/negative output voltage via I2C and enable the power rails by
pulling up ENP and ENN pins.
On Starmie, we need +/-6V power supply for the MIPI panel. We program
the AW37503 registers in coreboot so that kernel can control AW37503
via fixed regulators without additional settings(what we did for
TPS65132). Since we distinguish AW37503 and TPS65132 by reading the
vendor ID, we need to initialize I2C bus as early as possible.
Therefore, we move mtk_i2c_bus_init() to mainboard_init().
BUG=b:289482828
TEST=emerge-staryu coreboot chromeos-bootimage
TEST=Test the sequence the voltage
Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new kingler follower 'ponyta'.
BUG=b:290259648
TEST=make # select ponyta
Signed-off-by: cengjianeng <cengjianeng@huaqin.corp-partner.google.com>
Change-Id: I74759441957e9901bd7e5a709a2ae7d97a7cd040
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76331
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia756f842943b8e1f1877db7433641e6bbd05f45b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74407
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I889db739d6e006c1753eb8c0d208cf471d09f18d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The BT VGPIOs pad config in variant of gpio.c won't be overwritten on board eventually because no matched gpios existed here.
Put BT VGPIOs in gpio_table, ensure that these were able to be overwritten.
The fix included crota and omnigul BT offload work successfully.
BUG=b:264834572
TEST=test Bluetooth offload playback/capture in SCO profile.
Change-Id: I62cecf26abd0411f7cbb0a56b8b8f0a25d370c69
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add fw_config and configurate AUX pin for MB USB Type-C.
MB USB3 doesn't have re-timer, thus have to configurate the AUX pin.
BUG=b:275335023
TEST=build pass
Change-Id: I1334dcbaec6de1707c6892efbebaf8d460ba8648
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76348
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz for starting next phase.
BUG=b:270500631
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I0915d9b10dbfae7fff4e8874011951d1690de870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
constitution only has one TBT port, remove tcss_dma1.
BUG=None
TEST=emerge-constitution coreboot
Change-Id: Ia4eb4371eb20e75a0f464e2b087fd2fe59569537
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
|
|
Add a new apcb edit tool, apcb_v3a_edit.py, that injects SPDs into
an APCB for phoenix platform.
The tool makes several assumptions:
* Each SPD only uses blocks 0, 1, 3 and 5. All other blocks are zero.
* Each block is 64 bytes.
* Dimm and socket are always 0
* Unused SPD entries are zero'd
BUG=b:281983434
BRANCH=None
TEST=build, flash, boot myst
Change-Id: Ifb50287de77138170714a702ab87d56427aacfef
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76188
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL (Samsung)
2. K4UBE3D4AB-MGCL (Samsung)
BUG=b:289873670
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value to 20 in chipset for Thermal Control
Circuit (TCC) activation feature for meteorlake silicon.
Also, remove tcc_offset default value from rex baseboard
and variants.
BUG=b:270664854
BRANCH=None
TEST=Build FW and test on rex board
Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change i2c[3] parameter to meet below timing:
t-HIGH > 600ns;
900ns > Thd:dat > 300ns.
BUG=b:286030723
BRANCH=none
TEST=Test success by EE.
Change-Id: I4b2d958a5a0d41e2cfa1087f5cb94cc83bbb1739
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76169
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature for ovis.
BUG=b:270664854
TEST=Build and boot google/ovis.
Change-Id: I0ef626f6cc460f1b460297804b97038705efaf4c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds a power limit for Ovis with 28W Intel Meteor Lake
silicon.
Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982
BUG=b:289854108
TEST=Able to boot google/ovis with power limit being overridden as
appropriate to 28W.
Change-Id: I312c70720fd89261c53d5bd4f45236e829d6c790
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Currently, boards with ES2 silicon are unable to boot with crashlog
enabled because crashlog driver is unable to handle invalid data.
Temporarily disable the crashlog to unblock development until the issue
is fixed.
BUG=b:289749310
TEST=Able to boot to the OS on Screebo
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic63cf9cf5bfa2c92d8f2c5b13df2f23dc118b389
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Change i2c[0] parameter to meet touchscreen timing.
Thd:dat > 100ns.
BUG=b:287898252
BRANCH=none
TEST=Test success by EE.
Change-Id: I30e7c87d788f7f144276c45e8475af65f1f132ae
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables BT offload feature for soundwire audio over SSP1.
BT mode is selected via FW_CONFIG and corresponding VGPIOs are
programmed.
BUG=b:275538390
TEST=build and verify BT offload on rex soundwire audio
Change-Id: I99df78787d9f54c91bcedf6f70352890a715cdb3
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75924
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow the Project_Uldren_Thermal_paramters_list_2023_0626.xlsx to
modify DPTF parameters and tcc_offset.
- Set tcc_offset to 3.
- Update Critical Policy trip point.
- Update Power Limits PL1 minimum step size to control limits (in mW).
BUG=b:282598257
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and pass thermal test.
Change-Id: Ic5bbb3aa3b036a1eae8a95f63b570db2dc6da978
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76105
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
In next phase, joxer will remove external fivr.
BUG=b:285477026
TEST=emerge-nissa coreboot and boot to OS, suspend/resume
work normally.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I7fd7ad90e1544966170df402243604379f5790db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Update SX9324 register settings based on tuning value from SEMTECH.
BUG=b:279510275
TEST=Check i2c register settings on Pujjoteen5 and confirm P sensor function can work.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Idc9a2dc817e027551e209c0a26eeebad398f710c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75900
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the WIFI_SAR_ID field in FW_CONFIG to selcet the correct SAR table.
BUG=b:285477026
TEST=emerge-nissa coreboot and check the SAR value
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ibea62c77ecad9b2c475452b706779e4cfc6b06d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76144
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Resolve boot issue by tuning RX HS50 and HS200.
BUG=b:265611305
TEST=Reboot test 2500 times pass
Change-Id: I8a2727dc0ce9dc86c6bfb6d85567afee1734db62
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75812
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:283245785
BRANCH=firmware-grunt-11031.B
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I8eeb5c0935d0531c21bcf4cd3d4fd9dc80b54f79
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This configures the SoC to flip the orientation of the AUX pins to
follow the orientation of the cable when using the kb8010 retimer. This
is necessary when there is no external retimer/mux or the retimer/mux
does not implement the flip. The kb8010 retimer does not support this
feature, so let the SoC do the flip.
BUG=b:267589112
TEST=verified DP-ALT mode works in both cable orientations on rex with
reworked kb8010 DB by flykt@
Change-Id: Iad093e27617b80f8301008deb00b57fb9b3a48ba
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76137
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Secure OS was disabled on Grunt devices since it isn't used.
This reduces the attack surface and is meant to mitigate potential
security risks. However, this prevents users from using an alternate OS.
Enable Secure OS upstream to allows users to use Windows, and ensure
that it is still disabled in the chromium repo.
BUG=b:287630343
TEST=Builds with Secure OS included.
Cq-Depend: chromium:4620881
Change-Id: I213aebc41cae300ecee8c01fc5c7687f7e7f5ee3
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
- remove usb2_ports[5] since taranza doesn't have PL2303.
- add usb2_ports[6] and usb3_ports[1] for Type-A Port A4.
BUG=b:288094807, b:278167978
TEST=emerge-dedede coreboot chromeos-bootimage
verified all the USB port works
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I7b411c21271497ba386143140aa8cfbb17a1a111
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76186
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch performs below operations to enable LAN0.
- Complete the LAN PEREST power sequencing
- Program the SRC_CLKREQ (GPP_D20) with correctly.
- Add overridetree.cb entry to configure the LAN0 device.
BUG=b:289395519
TEST=Able to boot google/ovis with LAN0 being enabled.
Change-Id: I91b0a76395ade4459cf8705c333728a71f95df14
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76213
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch performs below operations to enable LAN1.
- Add overridetree.cb entry to configure the LAN device.
- Complete the LAN1/SD PEREST power sequencing
BUG=b:289395519
TEST=Able to boot google/ovis with LAN1 being enabled.
Change-Id: Ifb67cb8e6fc03e3ff14b1b3d8382322fd0b3aeff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76212
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures GPP_V12 aka SOC_SLP_LAN_L properly as per the
Ovis schematics dated June'23 to ensure LAN port is not in sleep.
BUG=b:289395519
TEST=Able to measure SLP_LAN PIN and confirm it's deasserted.
Change-Id: I1fe8715862823149c8a1f05e3e4463a615fbbbce
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76211
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures GPP_C10 aka EN_LAN_RAILS properly as per the Ovis
schematics dated June'23 to ensure LAN ports having power.
BUG=b:289395519
TEST=Able to measure LAN port power is enabled with this CL.
Change-Id: I3f4d611313325dba66905e0c8ef391765a1fe7a7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The taranza removed the APW8738BQBI and "disable_external_bypass_vr" should be set to "1" to disable.
BUG=b:288978340
TEST=emerge-dedede coreboot
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I0a849fbfacba1d200c969c66bb058863d7ab3085
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch updates the mux connection to reflect the Ovis schematics
dated June to ensure Type-C1 is able to work in DP-ALT mode.
BUG=b:289300284
TEST=Able to get display over Type-C1 port.
Change-Id: I223eb3a96e6a1b3abb4168fcf59c0df04c1b4498
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76149
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Configure GPIOs according to schematics.
BUG=b:287563817
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: If852c7a30edb9fb778872414cb15dc3446aebc55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75872
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add ramstage.c in Makefile.inc and update Dibbi power limits in
Dibbi ramstage.c.
BUG=b:281479111
TEST=emerge-dedede coreboot and check psys and PLx value on dibbi
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: Ieaff856b762b546f3e99acb7ba2ce15791193da6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75681
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With newer dedede design, it's required to config corresponding
psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of
adapter.
BUG=b:281479111
TEST=emerge-dedede coreboot and check correct value on dibbi
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: I583c930379233322c41027805369f81d02000ee7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Update system_configuration to 3 for 15W. Specification "FT6
Infrastructure Roadmap #57316" incorrectly lists system config index of
4 for 15W. Setting to 4 will cause an additional call to the SMU that is
not needed and will add boot delay. Both SMU and FSP interpret configs >
3 as 3.
BUG=b:267294958
TEST=Confirm extra message "Service Request 0x5F" not in log.
Change-Id: Ib12c73f95030625b52e26f86e932ee2aaa6ea522
Signed-off-by: Jason Glenesk <jason.glenesk@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Update system_configuration to 3 for 15W. Specification "FT6
Infrastructure Roadmap #57316" incorrectly lists system config index
of 4 for 15W. Setting to 4 will cause an additional call to the SMU
that is not needed and will add boot delay. Both SMU and FSP interpret
configs > 3 as 3.
BUG=b:267294958
TEST=Confirm extra message "Service Request 0x5F" not in log.
Change-Id: I1f3e305c48801b4e499de56d06c0dcd3eeacc626
Signed-off-by: Jason Glenesk <jason.glenesk@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76091
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
BUG=b:262501347
TEST=Boot on Ovis board.
Change-Id: I43aac857e3ec7989c9ab5201cd8f24a7c877e76b
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The SOC/IOE SRAM device is used to store crash logs. Previously, the
crashlog enablement was hardcoded in the baseboard.common module.
This commit moves the crashlog enablement logic to the baseboard
module, so that it can be enabled or disabled based on the specific
baseboard.
Additionally, the SOC/IOE SRAM is now enabled by default in the
baseboard devicetree.cb file. This prevents the system from hanging
if the SOC/IOE SRAM device is not present.
BUG=b:262501347
TEST=Able to build and boot google/screebo with this patch.
w/o this patch:
[ERROR] SOC SRAM device not found!
[ERROR] IOE SRAM base not valid
Change-Id: I02d581e5b62cfa114a3761a9704ad9f24dead8aa
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch enables SaGv with fixed frequency and gears for Ovis.
Restrict memory speed to 6400 MTS as per board design.
BUG=b:282164577
TEST=Verified the settings on google/ovis using debug FSP logs
Change-Id: Ia9703344a8ae9d2ba44a16c62afab820fd8e2177
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76138
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value to 20 in devicetree for Thermal Control
Circuit (TCC) activation feature for rex variants.
BUG=b:270664854
BRANCH=None
TEST=Build FW and test on rex board
Change-Id: I0567b6240fcb53f38158c381b700169475cf3795
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76110
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1.Add Codec ALC5650 setings for drivers/i2c/generic
2.Add option value '3' to AUDIO_CODEC_SOURCE for SSFC
BUG=b:284060672
BRANCH=master
TEST=emerge-dedede coreboot chromeos-ec chromeos-bootimage
Confirm the device is existed on system.
Change-Id: I39703a950620c90aa3740b7313b7d32cc68eede4
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75918
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
|
|
Hades uses GL9755 not GL9750. Select the right driver for ASPM.
BUG=b:283721798
TEST=check the coreboot log.
GL9755: configure ASPM and LTR
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia5b3b17d76f02d5114af24535f9a1eecc14358a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76118
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hades uses DDR5 which can't read SPD from coreboot yet. Use smbios
dump to print memory information.
TEST=check the coreboot log.
memory Channel-0-DIMM-0 type is DDR5
memory part number is MTC8C1084S1SC56BG1
memory max speed is 5600 MT/s
memory speed is 5200 MT/s
memory size is 16384 MiB
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ica44081228a3a1edc36e2110e84686582fbe8f33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Enable crashlog for rex. Select config options SOC_INTEL_CRASHLOG,
and SOC_INTEL_IOE_DIE_SUPPORT. Also enable ioe_shared_sram and
pmc_shared_sram devices.
BUG=b:262501347
TEST=Able to trigger Crashlog, BERT table gets generated and decodes
as expected.
Change-Id: I3d3a9fb41d1293f021ad9de9b29c756cb7559373
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
We have found inconsistencies in turn of FW_CONFIG settings/definitions,
so sync setting to vell config.star
BUG=b:282189358
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I676b719ecc711a6f59e76465a3566bf63924d90f
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75913
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch avoids random hang issue observed after booted to OS on LPDD5/x platforms due to CLK not tuned properly in SAGV point 0, 2133MT/s.
As per Intel doc 769410 the expected work around is to change SAGV
point 0 from 2133 G4 to 3200 G4.
BUG=b:287170545
TEST=Able to perform 500 power cycles on google/rex without any hang.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I02a9cadc075f396549703d7a008382e76268f865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76076
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree.
BUG=b:281479111
TEST=emerge-dedede coreboot and read correct value on dibbi
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Super Ni <super.ni@intel.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI.
BUG=b:280329972,b:283023296
TEST= Set bit 21 of FW_CONFIG with CBI
Boot rex board
Check that ISH is enabled, loaded, and functional
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: I3f0f9a7c8318fa9ae59b6f613eafdacbfa07c749
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Rename shared SRAM aliases for IOE and PMC to make them more readable.
pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram.
pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram.
Rename them in SOC code as well as mainboard to make sure the patch
builds for the relevant boards.
BUG=b:262501347
TEST=Able to build.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I02a8cacc075f396549703d7a008382e76258f865
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CNVi PCI device is required for the system to boot properly.
By ensuring that this device is enabled, we can prevent the below
error message from appearing and ensure that the system boots successfully.
BUG=b:274421383
TEST=Able to build and boot google/ovis without any error.
w/o this patch:
[ERROR] CNVi WiFi is enabled without CNVi being enabled
[ERROR] CNVi BT is enabled without CNVi being enabled
Change-Id: I4dbae14f0cfccf96a33437a0e2fdefb508209354
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Reducing the polling time from 16ms to 2ms. Experimentally we
have determined that the link state normally takes approximately
3.5ms to update and therefore we were waiting longer than necessary.
TEST=build and confirm we are not waiting the extended period.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I8fabb5ac46cae5c92d5b6f1dc0641a4d121c61dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76052
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Reduce the delay between PEXVDD and NVVDD from 3ms to 2ms
during power down sequences. The hardware discharge is
aggressive enough that we can safely optimize this.
BUG=b:288267305
TEST=build and measured delay is acceptable
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I7c65301414044487e50bbbca618c4e602e571cfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76051
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When powering rails down, there is no value in waiting for the PG
signal to de-assert. Instead, shut the rails off as quickly as possible
while maintaining a controlled ordering.
BUG=b:288266850
TEST=build and measured delays are gone
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: If31691a7d62b72661fcbacb34e90f3a6adec8134
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76050
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pre-boot display is not POR for google/rex hence disable the config
ENABLE_TCSS_DISPLAY_DETECTION.
BUG=b:247670186
TEST=Build and boot to google/rex and make sure that display over TCSS
works in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ib55e251a4620c7a375ee2f27763154c39207236e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
the board won’t have a SD card reader, so disable it.
BUG=b:285477026
TEST=USE="project_joxer emerge-nissa coreboot"
Change-Id: I6a55058b453771d264700a1364ef538f831148e4
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
For Phoenix the lane numbers in the DXIO descriptor match the ones in
the schematic, so remove the corresponding text and the table from the
comment on the fsp_dxio_descriptor struct. Since there's no logical to
physical lane number remapping needed for the lanes in the Phoenix DXIO
descriptors, drop the 'logical' from the start_logical_lane and
end_logical_lane fields in the DXIO descriptor and rename those to
start_lane and end_lane.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94664fd9d3807370b73f9fae8645d444e5faf7b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since GPP_C03/GPP_04 are floating in HW design, we set HBR smbus pin
as NC, in case it prevents ese and cse from entering suspend.
BUG=b:283053968
TEST=Verified on screebo non-TBT SKU, suspend and resume works.
Change-Id: I401db32f0286de61ce3ab6c61de9528ec76cb51d
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75643
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
USB type-A port with same PLD.token information as USB type-C port,
causes conflict while generating ACPI code for the EC CONN device.
Use a different PLD.token number for type-A port to fix the issue.
BUG=b:286328285
TEST=check ACPI can have right USB port in EC CON.
before patch:
Package (0x02)
{
"usb2-port",
\_SB.PCI0.XHCI.RHUB.HS01
},
Package (0x02)
{
"usb3-port",
\_SB.PCI0.TXHC.RHUB.SS01
},
after patch:
Package (0x02)
{
"usb2-port",
\_SB.PCI0.XHCI.RHUB.HS01
},
Package (0x02)
{
"usb3-port",
\_SB.PCI0.TXHC.RHUB.SS03
},
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: If3e76c11dd6808eee4c9c2f3f71604a60379b5a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Ovis uses MTL-H.
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
TEST=cros build-packages --board ovis chromeos-bootimage
Change-Id: I284c72b902490187d0b15e4fc81650af1cfa16d7
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75887
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to
`SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS
version 1.3.1 (doc number: 640228).
With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the
same package.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
get_usb_port_references refer the PLD group. If the port assign cross
ports like mux[0] use USB3 and mux[1] use USB1, then we need set USB3
to group 1. Update the PLD panel to back as well.
BUG=b:286328285
TEST=check ACPI can have right USB port in EC CON.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I97517ecd4f8615af749fb6d007ded8e171796f7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75912
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Using the boolean type and the true/false macros give the reader a
better understanding about the option. Thus, use the bool type for the
attribute and use the macros for assignments.
Skylake mainboards which use that option were changed by the following
command ran from the root directory.
socs="SOC_INTEL_(SKYLAKE|KABYLAKE|SKYLAKE_LGA1151_V2)" && \
option="s0ix_enable" && \
grep -Er "${socs}" src/mainboard | \
cut -d ':' -f 1 | \
awk -F '[/]' '{print $1"/"$2"/"$3"/"$4}' | \
xargs grep -r "${option}" | \
cut -d ':' -f 1 | \
xargs sed -i'' -e "s/${option}\".*\=.*\"1\"/${option}\" \= true/g"
Change-Id: I372dfb65e6bbfc79c3f036ce34bc399875d5ff16
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75871
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Configure I2C0/1/3/4 timing in devicetree to ensure I2C devices
meet timing requirement. Note that I2C5 timing will be updated
separately when the tuning done
BUG=b:280559903
TEST=Build and check I2C devices timing meet spec.
| | I2C0-Codec | I2C0-WFC | I2C1 | I2C3 | I2C4 |
|-------------|------------|----------|--------|-------|---------|
| FSMB(KHz) | 347 | 343.2 | 389.3 | 393.7 | 381.9 |
| TLOW(us) | 2.1 | 2.093 | 1.895 | 1.902 | 1.953 |
| THIGH(us) | 0.647 | 0.628 | 0.602 | 0.62 | 0.612 |
| THD:STA(us) | 0.633 | 0.64 | 0.601 | 0.6 | 0.601 |
| TSU:STA(us) | 0.617 | 0.621 | 0.619 | 0.659 | 0.61 |
| TSU:STO(us) | 0.656 | 0.647 | 0.667 | 0.727 | 0.634 |
| TBUF(us) | 86.15 | >14.088 | >9.833 | >8 | >10.366 |
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I5421e4fe68e856bbe9f19544954a94670c895a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75150
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Remove rp2 and add rp1/rp3 for screebo
BUG=b:286187816
BRANCH=none
TEST=emerge-rex coreboot and verify TBT works.
Change-Id: I1013d26c705f2a3f9378d944bd863d94f319d36c
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75832
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update overridetree to support ELAN and G2_G7500 touchscreen.
BUG=b:285477026
TEST=emerge-nissa coreboot and check touchscreen function
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I236a2815f956929c6cd84c981cb15e9ab0f657b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75762
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'ModPhyIfValue'.
Change-Id: I4cdf68e65cea4ab316af969cd6a8d096b456518d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75855
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
