summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-10-30mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHzJohnny Li
The current I2C5 bus frequency is 367 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, scl_hcnt value for I2C5 to bring the bus frequency closer to 400kHz. BUG=b:153588771 TEST=Verified that I2C5 frequency is between 389-396kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: If0803a74ba9071acf15486ce4038261c1681a92f Reviewed-on: https://review.coreboot.org/c/coreboot/+/46142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-30soc/intel/broadwell: Separate PCH in devicetreeAngel Pons
Flesh out the PCH configuration into a separate chip. Keep it within the Broadwell SoC directory for now, to ease moving files around. The boards were prepared beforehand and the devicetrees require next to no changes. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I28d948f3e6d85e669d12b29516d867c1d1ae9e1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46700 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/google/auron: Add SATA PCI device to overridetreeAngel Pons
`chip` entries are only hooked up via device nodes to the tree. A `chip` without a `device` below it does nothing. To allow variants to override SATA tuning parameters, ensure a device exists under the PCH chip scope. Without this change, some variants would not properly override the SATA tuning parameters after extracting the PCH parts into a different chip. TEST=Sanity-check static.c and verify overridetrees override properly. Change-Id: I013dbe1403567b93c8ee0e66f76481f2a3f42796 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46769 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/google/jecht: Prepare devicetree for PCH splitAngel Pons
Tested with BUILD_TIMELESS=1, all variants remain identical. Change-Id: I0fa486b8a0fc8be974f37d0bb4eb77a254e8cd86 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46703 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29mb/google/volteer: correct memory id for elemiWisley Chen
BUG=b:170604353 BRANCH=volteer TEST=emerge-volteer coreboot, and boot into kernel. Change-Id: If354aa158f3ad60193268f38278a44f9c99bf3db Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46770 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29hatch: Create ambassador variantMatt Ziegelbaum
Create the ambassador variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:171561514 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_AMBASSADOR Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org> Change-Id: Ib0e3a813a120a4a8e984f3a89dc3ba100d94da95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28mb/google/zork: Revert temp acpi backlight fixJosie Nordrum
Remove code to turn on backlight during ACPI mode because backlight has been properly enabled in ACPI. BUG=b:158087989 BRANCH=Zork TEST=tested backlight during reboot and suspend Signed-off-by: Josie Nordrum <JosieNordrum@google.com> Change-Id: I3bf06042aa19e4559127d611d401f0ba0516b3a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28mb/google/zork: Generate acpi methods in mainboard.cJosie Nordrum
Generate acpi methods which enable and disable backlight during _INI, _WAK, and _PTS. BUG=b:158087989 BRANCH=Zork TEST=check backlight during reboot and suspend Signed-off-by: Josie Nordrum <JosieNordrum@google.com> Change-Id: I2f3434dc92de1f697693ff69ca15bd76647b89a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46671 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28mb/google/nightfury: Set internal pull-down for GPP_D19Seunghwan Kim
Add internal pull-down for GPP_D19 to improve DMIC noise issue on nightfury. BUG=b:171669255 BRANCH=firmware-hatch-12672.B TEST=Built and checked GPP_D19 voltage after booting Change-Id: Ie63f260be3d6a55f91908db59312b3b0a8af98f4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-28mb/google/asurada: Pass reset gpio parameter to BL31CK Hu
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I2ae7684a61af76693605cc0bcf8d20c8992c7bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/46388 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28mb/google/asurada: Configure pinctrl for SD and MMCWenbin Mei
The pins for SD and MMC must be configured properly so we can access them in payloads. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: Ie6bdffb987d5acf286645550f1c53f294f71c38a Reviewed-on: https://review.coreboot.org/c/coreboot/+/46685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-27mb/google/octopus/var/garg: Disable XHCI LFPS power management by skuKevin Chiu
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:171478764 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Change-Id: I213fed2b56f216747b2727b69f97d46d8c0c872e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46701 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/octopus/var/garg: fix LTE power sequence in reboot stateKevin Chiu
invoke LTE power off function to meet LTE power sequence while DUT is in reboot state. BUG=b:167565015 BRANCH=octopus TEST=build and verify on the DUT with LTE Change-Id: I825cefb524ddaf9a9cb6add31c2ee0eea484f978 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46022 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/auron: Prepare devicetree for PCH splitAngel Pons
Tested with BUILD_TIMELESS=1, all variants remain identical. Change-Id: I2b088b36c8e9ff9cbd47d625b14fc45ebd96532a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46702 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/dedede/var/magolor: Configure I2C high and low timeRen Kuo
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:168783630 TEST=Measured the I2C bus frequency reduce to 387 KHz. Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I9f5b81815f86db7bdcea95a95b9c9b235b4a34b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46613 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/kukui: change Jacuzzi followers LCMID to fixed valueKevin Chiu
The LCM ID is not really used on Jacuzzi followers and the reference design expects ADC to return 0. However, there were hardware design issues so the returned value became unexpected numbers. - Juniper and Kappa returns 1. - Burnet and Esche returns 1 on normal boot, and 0 on recovery boot. - Cerise and Stern usually returns 0, and sometimes 1. To fix that, we are changing LCM ID to fixed value for Jacuzzi followers. BUG=b:170916885,b:171365301 BRANCH=kukui TEST=1. emerge-jacuzzi coreboot 2. check burnet/esche skuid correctly Change-Id: I3b43b9153315ec65e9168c4e84ea844dff14d446 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-26mb/google/volteer: Add a DPTF policy for EldridNick Chen
1. Enable dptf feature and remove fan control part from overridetree.cb 2. Update tcc offset to 5 3. Follow thermal validation and update PL2 max_power to 51 BUG=b:167931578, b:170357248 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I99e429b90ed7de08385fe51ca742865b1266eef9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-26Revert "mb/google/dedede: Add mainboard acpi support for GPIO PM configuration"Karthikeyan Ramasubramanian
This reverts commit 214c719eed83967b8f0564feca65eebb3d83f5bc. CB:45857 overrides the GPIO PM configuration if Cr50 does not support long interrupt pulse width. More recent Cr50 Firmware versions support long pulse width and hence the GPIO PM can take the default configuration. BUG=None TEST=Build and boot Drawlat to OS. Ensured that 200 iterations of suspend/resume sequence, warm and cold reboot cycles each are successful. Change-Id: I8e3be42cd82fd3ae919d23d6f19c84a90b9c737a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-26mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWRSheng-Liang Pan
Enable front camera power in ramstage. BUG=b:169170677 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I8b5a9a8333ed518883aa3664a115a4ba2e8a0218 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2020-10-26mb/google/octopus/var/fleex: Add goodix touch pad supportEric Lai
Add goodix touch pad as below: HWID : GXTP7288 CID : PNP0C50 I2C address : 0x2C I2C speed : 400Khz HID Descriptor Address : 0x20 BUG=b:171351666 BRANCH=octopus TEST=build image and verify goodix touch pad working. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idb4f8d3aff09712dcc98c8ae0c9ae30dc4049e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46614 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/octopus/var/fleex: Add new SKU for LTE touchAmanda Huang
New SKU ID 5 is used for LTE touch SKU. This patch does LTE power off for LTE sku and only use Wifi SAR table for non-LTE sku. BUG=b:168001586 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4 and 5. Change-Id: Ic0405d3e52aa813bbb1f350966a9e2825e595ce4 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46643 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/zork/vilboz: Enable SAR proximity sensor STH9324Frank Wu
BUG=b:161759253 BRANCH=firmware-zork-13434.B TEST=emerge-zork coreboot chromeos-bootimage firmware log: \_SB.I2C2.SEMTECH SX9324: SAR Proximity Sensor at I2C: 02:28 kernel log: INFO kernel: [ 11.238644] sx932x i2c-STH9324:00: initial compensation success Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I6294ce291365443dd1c4550ba75cb7f33481b889 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/zork: Update style of check on cbi return valuesEric Lai
Since google_chromeec_cbi_get_board_version and google_chromeec_cbi_get_fw_config both call cbi_get_unit32 and return 0 as success, non-zero as failure. Let's add more readability for the false condition. BUG=None TEST=check with empty CBI value Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia49ac1ee35302f8f6afe8c0eb8e13afdf36c5b2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46566 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
Use PCIE_CLK_NOTUSED in place of 0xFF for unused PCIe ports BUG=none BRANCH=master TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I35f2bbce35420fa98541a35f77b14df7440e7980 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26mb/google/volteer/var/terrador: Disable SRCCLKREQ1#David Wu
According to the schematic, SRCCLKREQ1# is not connected, so disable it for terrador and todor. BUG=b:171278849 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I5f7734d64390bfadbdb8d152261103adb8e75f40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-26mb/google/volteer/var/voxel: Disable SRCCLKREQ1#Sheng-Liang Pan
According to the schematic,SRCCLKREQ1# is not connected,so disable it on voxel. BUG=b:171279034 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ibc4f766bd737f30a9ac3c7354d54398e0c36d59d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46612 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/asurada: fix EC commands timeoutHung-Te Lin
The Asurada EC is using the large packet (256B) mode, and we were seeing lots of timeout errors on various commands. The AcceptTimeoutUs in EC SPI driver is hard-coded at 5000, and that is too small for large packet running in 1M so we should change EC SPI to the same value that kernel is using (3M). BUG=b:161509047 TEST=emerge-asurada coreboot chromeos-bootimage; flash and boot Signed-off-by: Hung-Te Lin <hungte@chromium.org> Change-Id: I9c47324022129ca23ef75d0c80e215da1692636d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46394 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-24mb/google/zork: update USB 2.0 controller Lane Parameter for berknipKevin Chiu
Enhance USB 2.0 C0/C1 A0/A1 SI by increasing the level of "HS DC Voltage Level" and " Disconnect Threshold Adjustment" registers. COMPDISTUNE0: 0x3->0x7 TXVREFTUNE0: 0x6->0xf BUG=b:166398726 BRANCH=zork TEST=1. emerge-zork coreboot 2. check U2 register is set correctly. 3. U2 SI all pass Change-Id: I69d942605c6d43ece0d71f67df3a5e00b998219b Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46545 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/volteer: Add settings for noise mitgationShaunak Saha
Enable acoustic noise mitgation for volteer platforms. BUG=b:153015585 BRANCH=none TEST= Measure the change in noise level by changing the values in devicetree. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I69a6453091bf607d3c5847c99bc077e6b7dbc639 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45053 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/zork: update telemetry settings for morphiusKevin Chiu
Update the two load line slope settings for the SVID3 telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD Slope: 62852 -> 62641 SOC Slope: 28022 -> 28333 BUG=b:170531252 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Id831907aa47be27fef2e33bb884a1118ffec14a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-10-23mb/google/zork/woomax: Adjust disconnect thresholdRob Barnes
The disconnect voltage needs to be adjusted up because the HS DC voltage level is 0xF. BUG=b:170879690 TEST=Servo_v4 USB hub functions BRANCH=zork Change-Id: If8662015a45c57e457b4593e55af888084842f58 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-23mb/google/dedede: Update the flash ROM layout for RW regionsKarthikeyan Ramasubramanian
RW_LEGACY region needs to be 1 MiB to accommodate any alternate firmware. Hence update the flash ROM layout as below: * Grab ~512 KiB from each FW_MAIN_A/B regions and allocate them to RW_LEGACY region so that it grows to 1 MiB. * Remove VBLOCK_DEV region which is not used. * Re-size the ELOG region to 4 KiB since that is the maximum size of the ELOG mirror buffer. * Resize RW_NVRAM, VBLOCK_A/B regions to 8 KiB since no more than that size is used in those regions. * Resize SHARED_DATA region to 4 KiB since no more than that size is used in that region. * Based on the resizing, allocate each FW_MAIN_A/B regions with 72 KiB. BUG=b:167943992, b:167498108 TEST=Build and boot to OS in Drawlat. Ensure that the firmware test setup and flash map test are successful. Ensure that the event logs are synced properly between reboots. Ensure that the suspend/resume sequence is working fine. Ensure that the ChromeOS firmware update completes successfully for the boot image with updated flash map and the system boots fine after the update. Change-Id: I53ada5ac3bd73bea50f4dd4dd352556f1eda7838 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46569 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/dedede/var/drawcia: Add MIPI camera supportWisley Chen
To support mipi WFC. 1. enable DRIVERS_INTEL_MIPI_CAMERA/SOC_INTEL_COMMON_BLOCK_IPU 2. add IPU/VCM/NVM/CAM1 in devicetree BUG=b:163879470, b:171258890, b:170936728, b:167938257 TEST=Build and boot to OS. Capture frames using camera app. Change-Id: I96f2ef682dff851d7788c2b612765a92228ddf75 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44939 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23sc7180: enable RECOVERY_MRC_CACHEShelley Chen
Enable caching of memory training data for recovery as well as normal mode because memory training is taking too long in recovery as well. This required creating a space in the fmap for RECOVERY_MRC_CACHE. BUG=b:150502246 BRANCH=None TEST=Run power_state:rec twice on lazor. Ensure that on first boot, memory training occurs and on second boot, memory training is skipped. Change-Id: Id9059a8edd7527b0fe6cdc0447920d5ecbdf296e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46651 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-22dedede: Create metaknight variantTim Chen
Create the metaknight variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:169813211 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_METAKNIGHT Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Change-Id: Ia2e473eb1d0a2c819b874e497de0823fca75645a Reviewed-on: https://review.coreboot.org/c/coreboot/+/46568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-22mb/google/asurada: Add Chrome OS GPIOsHung-Te Lin
Add the Chrome OS specific GPIOs (WP, EC, H1, ...) GPIOs. BUG=None TEST=emerge-asurada coreboot; # also boots into emmc BRANCH=None Signed-off-by: Hung-Te Lin <hungte@chromium.org> Change-Id: Ieeeee88a09ae4c3af15e2ae93a29684d30dde493 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46386 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-22mb/google/asurada: enable SPI devicesNicolas Boichat
Configure and initialize EC and TPM on Asurada. BUG=none TEST=boot asurada Change-Id: I0f169407d1726899fd0c42e144d907024f036c6a Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46385 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
Enhance USB 2.0 SI by increasing the level of "HS DC Voltage Level" and "Disconnect Threshold Adjustment". COMPDISTUNE0: 0x3->0x7 TXVREFTUNE0: 0x6->0xf BUG=b:162614573 BRANCH=zork TEST=1. emerge-zork coreboot 2. check U2 registers are set correctly 3. test with servo v4 type-c, it's working expectedly. 4. U2 SI pass Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I278cc0aaddbc9fce595bf57ca69ee8abfc9f5659 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46537 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21mb/google/zork: Update telemetry settings for morphiusKevin Chiu
Correct the two load line slope settings for the SVID3 telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. BUG=b:168265881 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Id6c4f1a92d7f2ad293df7b63694e9665b85f8018 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46472 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-21mb/google/dedede: drop obsolete ISST workaroundMichael Niewöhner
Early JSL silicon hang while booting Linux with ISST enabled. The malfunctioning silicon revisions have been used only for development purposes and have been phased out. Thus, drop the ISST workaround. Change-Id: Ic335c0bf03a5b07130f79c24107a1b1b0ae75611 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-21soc/intel,mb/*: get rid of legacy pad macrosMichael Niewöhner
Get rid of legacy pad macros by replacing them with their newer equivalents. TEST: TIMELESS-built board images match Change-Id: I078f9bb3c78f642afc6dcfd64d77be823a4485c2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-21mb/google/dedede/variants/drawcia: update PL1 max and min power valuesSumeet R Pawnikar
Update PL1 max and min power values BUG=None BRANCH=None TEST=build and verify on dralat system Change-Id: I75d47fa721576564f71fbd5d5fd2e820fc3f1925 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-20mb/google/volteer/var/terrador: Configure board specific DPTF parametersDavid Wu
Configure board specific DPTF parameters for terrador and todor BUG=b:171019363,b:170699797 BRANCH=volteer TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I19935ca98ec7a078869e73d65ea471df70f37121 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-20mb/google/volteer/variants/lillipup: add generic SPDsNick Vaccaro
Add generic LPDDR4x SPD support for the following three memory parts: • K4U6E3S4AA-MGCR • H9HCNNNBKMMLXR-NEE • MT53E512M32D2NP-046 WT:F BUG=b:170264065 TEST=none Change-Id: Ie3163763a0ce291f27c43181d35c070c218b461d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-20mb/google/dedede: Add P-sensor for Botenalec.wang
Add devicetree and device ID for P-sensor BUG=b:161217096 BRANCH=NONE TEST=We can get the data from P-sensor if touch the SAR antenna. Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: I70f303995b106cca9758b36ebcde112ebcc90950 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-20mb/google/dedede: add PEN for Botenalec.wang
Update devicetree of boten that enable stylus BUG=b:160752604 BRANCH=NONE TEST=build bios and verify function for boten Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: Ifbcac18fcf758f3d870a6af0d1b03e34369414c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-20mb/google/asurada: Init dram in romstageHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ied350570a695cca1424a6562e41120bcaf467797 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44568 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/google/octopus/variants/ampton: Add G2Touch touchscreen supportJames Chao
BUG=b:170703029 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Change-Id: I2bf642963283b8a31a3bd9504c40541ca2f64b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-19volteer+vendorcode: Retrieve Cr50 version only via SPIJes Klinke
No recent Chromebooks have used I2C for TPM communication, and as a result, a bug has crept in. The ability to extract Cr50 firmware string is only supported via SPI, yet code in mainboard and vendorcode attempt to do so unconditionally. This CL makes it such that the code also compiles for future designs using I2C. (Whether we want to enhance the I2C protocol to be able to provide the version string, and then implement the support is a separate question.) This effort is prompted by the desire to use reworked Volteer EVT devices for validating the new Ti50/Dauntless TPM. Dauntless will primarily be using I2C in upcoming designs. BRANCH=volteer TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x Change-Id: Ida1d732e486b19bdff6d95062a3ac1a7c4b58b45 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/46436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-10-19Revert "mb/google/zork/dalboz: Increase eMMC initial clock frequency"Rob Barnes
This reverts commit c4a5acdabc28778b49a1c088b0736bac83e2ab51. Reason for revert: Dalboz is missing pull-up on cmd line, so 400khz is not possible. TEST=Boot Dalboz BUG=b:159823235, b:169940175 BRANCH=zork Change-Id: I89653bfeefa522c17ee2d736215bc22aa445871c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-19mb/google/dedede/var/waddledee: Enable GPIO based I2C MultiplexerKarthikeyan Ramasubramanian
The camera sensor component chosen for UFC and WFC have an address conflict. Resolve it by enabling GPIO based I2C Multiplexer. Also configure the GPIO that is used as select line. BUG=b:169444894 TEST=Build and boot waddledee to OS. Ensure that the ACPI identifiers are added for I2C devices multiplexed using I2C MUX under the appropriate scope. Change-Id: I9b09e063b4377587019ade9e6e194f4aadcdd312 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
Enable the USB4 retimer driver with GPP_H10 as the power control. Change-Id: I166bc477f94c159bb411620a6bf77b5d1f194fb2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-19mb/google/kukui: Support SKU from camera EEPROMHung-Te Lin
To support camera second source GC5035 for kodama, add world facing camera id as part of the sku id, which is determined by the data in camera EEPROM. For models other than kodama, the camera id is always 0 and hence the sku id is unchanged. BUG=b:144820097 TEST=emerge-kukui coreboot TEST=Correct WFC id detected for kodama with GC5035 camera BRANCH=kukui Change-Id: I63a2b952b8c35c0ead8200d7c926e8d90a9f3fb8 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45811 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/google/volteer/elemi: Add memory.c for DDR4Wisley Chen
Add new memory.c to support DDR4 memory types. BUG=b:170604353 TEST=emerge-volteer coreboot chromeos-bootimage Change-Id: If96b0bda0ce95766f0957c37aa7cbecefc9c03e0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-19mb/google/zork/var/vilboz: update dptc stapm timeJohn Su
Update dptc setting: Stapm_time_constant 1400 BUG=b:170696020 BRANCH=zork TEST=emerge coreboot and check "Stapm_time_constant" Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I61d9e00a9d098ad9699b8cf89e70d11de2b95ffd Reviewed-on: https://review.coreboot.org/c/coreboot/+/46048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-10-17trogdor/sc7180: Clarify USE_QC_BLOBS requirementsJulius Werner
This patch adds some Kconfig hints to make it clearer that the USE_QC_BLOBS option is required for SC7180 boards and guide the user in the right direction through menuconfig. Also add those little arrows to the Trogdor board options that are there on most other boards. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I973cae8026a229408a1a1817c4808b0266387ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-10-16mb/google/zork: disable eMMC per FW_CONFIG for berknipKevin Chiu
Berknip has SSD/eMMC SKU, we should turn off eMMC　if storage is NVMe SSD. BUG=b:170592992 BRANCH=zork TEST=1. emerge-zork coreboot 2. Check eMMC is enabled or disabled based on the eMMC bit in FW_CONFIG. Change-Id: I7aeabc98fc16bc2837c8dcdc40c3c6a80898cdc9 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
HybridStorageMode FSP UPD needs to be set only for optane storage. Enabling HybridStorageMode causes some extra delay in FspSiliconInit due to HECI command and hence is avoided for NVMe and SATA scenerios. This change disables "HybridStorageMode" for volteer baseboard. For boards using optane HybridStorage needs to be enabled from overwrite devicetree. We are enabling HybridStorage for volteer and volteer2 as those plaforms have SKU's with optane storage. BUG=b:158573805 TEST=Build and boot non optane device and confirm that FspSiliconInit time is reduced. This saves ~100ms. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I54fc78e3f888d4f2a02ba0ad6b9aef33eb872a9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-14mb/google/dedede/var/madoo: Update DPTF settingJohn Su
Add tcc, critical, passive policy, and pl values from thermal team. BUG=b:169215576 TEST=build and verify by thermal tool Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I4f61eaa7eab2b86b04ff0541886621afb3082b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-10-14mb/google/zork: Enable wake on wireless lanRob Barnes
Add generic wifi ACPI entry for wake on lan event. Change configuration of GPIO 2/WIFI_PCIE_WAKE_ODL to SCI. BUG=b:162605108 TEST=$ iw phy phy0 wowlan enable disconnect $ cat /proc/acpi/wakeup | grep WF WF00 S3 *enabled pci:0000:01:00.0 $ powerd_dbus_suspend Reboot wifi router, DUT wakes up BRANCH=zork Change-Id: Idbeb2cfbc4995b8382ffc26cbe7b53764fc9252d Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45745 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-14mb/google/puff/var/dooly: Enable Ambient Light Sensor (ALS)Tony Huang
Enable ALS ACPI devices for dooly. BUG=b:168426118 BRANCH=puff TEST=Ensure that ALS devices are enabled in ACPI tables. Change-Id: Idd44d6ae1e7b62939fdfc3a0ab01924d2c1714aa Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-13mb/*/*/dsdt.asl: Drop useless comments in DefinitionBlock()Elyes HAOUAS
Change-Id: I1e0489ec6730760f74102cdd00e4aaa66975d69a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mainboard/*/*/dsdt.asl: Make DefinitionBlock's AMLFileName uniformElyes HAOUAS
Make output AML file name uniform. Change-Id: Ic6cac4748a6159c695888b2737ada677d91f4262 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13volteer: Create elemi variantWisley Chen
Create the elemi variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:170604353 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_ELEMI Change-Id: I6013b6d8b28610a79f5ec49d373b2897799bffef Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-10-13mb/google/zork: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I71ee54116ade4d6826dffc31ee879a70d3fc967f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-13mb/google/puff/var/dooly: Update devicetree for audio and display configurationTony Huang
1. Add speaker amplifier ALC1015 2. Enable dmic+ssp registers for speaker and camera DMIC 3. Correct I2C#2 to LVDS, I2C#3 to Touchscreen BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: I5f6f19b40c6fcce8dca9b010ae97ea6e3eeb1473 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46289 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb/google/puff/var/dooly: Update devicetree to remove unused devicesTony Huang
Remove unused device in Dooly no SD card reader no built-in LAN BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: I8ab1e156031bfb4d5ea30048d8a10400f2a49411 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-13mb/google/puff/var/dooly: Update devicetree for USB configurationTony Huang
Dooly has USBA*2 and USBC*2 BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: Icb66a8d5382ca9664e7f0b3660f446aeb3cf1dd3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46126 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb/google/puff/var/dooly: Update GPIO table for project changeTony Huang
Override unused device SD card reader, built-in LAN ALC1015 speaker amplifier SPK_AMP_ON Update touchscreen/lvds gpio pin BUG=b:170273526 BRANCH=puff TEST=Build and check DUT function status Change-Id: Ife14adf59609870abe9f4ba1eabe2573cb6e92dd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-12mb/google/volteer/var/voxel: disable DdiPortHpdSheng-Liang Pan
GPP_A19 and GPP_A20 set no connection, disables DdiPort1Hpd and DdiPort2Hpd BUG=b:169690329 TEST=build and verify type-c(C0/C1) port functional normally Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I4405526ae777332d3c72041db7b4eda25ae31b8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46069 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/dedede: refactor DPTF section for simpler overridesSumeet R Pawnikar
Refactor DPTF section of code under the baseboard devicetree and overridetree. This makes override mechanism more simpler, because not all the DPTF fields need to be overridden. BUG=None BRANCH=None TEST=Built and tested on dedede system Change-Id: I8e7cfe60c010ed4c07f9089325b289519e861f84 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12mb/google/asurada: Add USB supportCK Hu
Change-Id: I35dc4be65f0843c3c74695c443dd958676e6c12c Signed-off-by: CK Hu <ck.hu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-12mb/google/dedede: Enable SaGv supportAamir Bohra
Allow MRC training in SaGv low, mid and high frequencies. TEST=Verify memory trains at low, mid and high SaGv point through FSP debug logs enabled. Change-Id: I0f60aad031ce9dfe23e54426753311c35db46c05 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45196 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
Fix typo for power limit values under comment section in baseboard BUG=None BRANCH=None TEST=Build for volteer system Change-Id: I879b9587e863360bf4efda4099d96b42b904377e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12mb/google/dedede: update devicetree for Botenalec.wang
Add trackpad, touchscreen, and usb port to devicetree BUG=b:160664447 BRANCH=NONE TEST=build bios and verify theirs function for boten Signed-off-by: alec.wang <alec.wang@lcfc.corp-partner.google.com> Change-Id: I057f7d15d20d1a78acd733cc5463357e9c87afb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-10-12mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNCNick Vaccaro
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC. Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated with H5ANAG6NCJR-XNC DDR4 memory parts. BUG=b:161772961 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Change-Id: Ia26315479ce1a749a0f7c9e81f134f7068d7eb0b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot dirinboz, run integrity test, b:169940185 BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/dalboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1191d73a2a3f72f99de187a946162460acbb287a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45935 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/woomax: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=WIP BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I2fcbe35103020c3444902c077b4985f87f970671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45936 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on Vilboz with emmc BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I9a1e47dbee3fcc7317857d40c5418be30d755d61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/jecht: Disable PCIe AERMatt DeVillier
Ethernet hardware on jecht variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: Ieda82c6e13c2bbc4b3a051a3d2a7ae90728ccdc6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46137 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/beltino: Disable PCIe AERMatt DeVillier
Ethernet hardware on beltino variants doesn't support AER, so disable it to mitigate continuous AER timeout errors in dmesg: > pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 > pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) > pcieport 0000:00:1c.0: AER: device [8086:9c94] error status/mask=00001000/00002000 > pcieport 0000:00:1c.0: AER: [12] Timeout Change-Id: I0f592a21d08e79cda251e80cd1f1184c4311e9df Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46136 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/puff: Enable SATA0 on wyvernSam McNally
A SATA drive may be connected to SATA0. BUG=b:162909831 BRANCH=puff TEST=none Change-Id: I2a4ce2f89fa6d786358e01add15f2eedfbe4b20f Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-10-11drivers/wifi: Drop maxsleep parameter from chip configFurquan Shaikh
This change drops maxsleep parameter from chip config and instead hardcodes the deepest sleep state from which the WiFi device can wake the system up from to SLP_TYP_S3. This is similar to how other device drivers in coreboot report _PRW property in ACPI. It relieves the users from adding another register attribute to devicetree since all mainboards configure the same value. If this changes in the future, it should be easy to bring the maxsleep config parameter back. BUG=b:169802515 BRANCH=zork Change-Id: I42131fced008da0d51f0f777b7f2d99deaf68827 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants. Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
1. Apply the DPTF parameters received from the thermal team. BUG=b:169183507 TEST=build and verify by thermal tool Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I1a1a0f9e86e519ac15904fac80cf3c2299213e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-09mb/google/dedede: Override GPIO PM configurationKarthikeyan Ramasubramanian
If Cr50 is running old firmware version and hence does not ensure long interrupt pulses, override the GPIO PM configuration. BUG=None TEST=Build and boot waddledee to OS. Ensure that any chip override happens before FSP silicon parameter initialization. Ensure that the suspend/resume sequence works fine. Ensure that the reboot sequence works fine for 50 iterations. Change-Id: I455c51d4a63b1b5edadbf00c786ce61b0ba1ff00 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-09mb/google/octopus: Disable Ambient Light Sensor (ALS)Karthikeyan Ramasubramanian
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices. BUG=b:169245831 BRANCH=octopus TEST=Ensure that ALS devices are disabled in ACPI tables. Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Berknip w/ eMMC to OS. BRANCH=zork Change-Id: I5d55f55b8208b4dc3fbdc9d1ec6333f9e211e3fd Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45931 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
Current Ram_Id: 0011 MT40A1G16KNR-075-E never be built before. Remove it and change use micron-MT40A1G16KD-062E-E for ram_id:0011. BRANCH=zork BUG=b:159316110 TEST=run gen_part_id then check the generated files. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I28fc39f17e06ecd39f6567613e6ff5919becb2fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45810 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot Ezkinil w/ eMMC to OS. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ida0bbf9bd772ab7d384d5d097fa3b02b846a3efa Reviewed-on: https://review.coreboot.org/c/coreboot/+/45852 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot on morphius with and without patch, confirm ~7ms improvement BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I7f6efd3d5839f154f2487a07654be8e35634bbbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45932 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/dedede/variants/drawcia: Update TSR1 passive trip temperatureSumeet R Pawnikar
Update TSR1 passive trip temperature BUG=b:169691800 BRANCH=None TEST=Built and tested on dedede system Change-Id: I172391daca981d5591fa9cc5eacad92521dd0dc5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-08mb/google/dedede: Configure VR in devicetreeMeera Ravindranath
BUG=b:167472333 TEST=Build and boot dedede and observe the slope and offset values getting updated in the fsp debug log Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I3ea32218040263f0abef9b9dd4c52efb16289fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45825 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08mb/google/volteer: disable TBT if no USB4 hardware availableNick Vaccaro
Implement mainboard_silicon_init_params() to allow for disabling of TBT root ports if the device does not have usb4 hardware. Add code to mainboard_memory_init_params() to disable memory-related settings associated with TBT in cases where no usb4 is available. BUG=b:167983038 TEST=none Change-Id: Iab23c07e15f754ca807f128b9edad7fdc9a44b9d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-08soc/mediatek: Add function to raise the CPU frequency of MT8192Weiyi Lu
Rename all mt_pll_raise_ca53_freq() into mt_pll_raise_little_cpu_freq(). Implement mt_pll_raise_little_cpu_freq() in MT8192. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I97d9a61f39f2eb27f0c6f911a9199bf0eaae4fbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/45401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 18:30:05 +0000