Age | Commit message (Collapse) | Author |
|
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Added device hid info to the MST RTD2141b device on
trembyle.
BRANCH=zork
BUG=b:147402710
TEST=Build and flash BIOS image, see 10EC2141 appears
under /sys/bus/i2c/devices
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Change-Id: I97a67f9dbc31cd788d579252d7d355b24d97ca30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
This conflicts with the MSTH i2c_tunnel.
BUG=b:175146875
BRANCH=zork
TEST=Boot trembyle and inspect ACPI tables.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iac04c7dc361d427f5ebb99644aa70bd0c7dbb918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Dalboz variants do not use an MST hub; remove the i2c tunnel for it.
That bus is actually connected to the battery on these devices, which
should not be exposed to the AP.
BUG=b:175658311
TEST=builds
BRANCH=zork
Change-Id: If1714a5c441bf185efd2517c7c94e57b5f351f5a
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49628
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fw_config field SPI_SPEED is not used for zork devices.
To define SAR config, use the fw_config bit[23..26].
Then vilboz can loaded different WiFi SAR table for different SKUs.
BUG=b:176858126, b:176751675, b:176538384
BRANCH=zork
TEST=emerge-zork coreboot chromeos-bootimage, then verify that tables are
in CBFS and loaded by iwlwifi driver.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I5ba98799e697010997b515ee88420d0ac14ca7ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The FW config takes 2 bits for USE_FAN[27,28].
So FW_CONFIG_SHIFT_WWAN value should be 29.
BUG=b:174121847
BRANCH=zork
TEST=build vilboz
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ica6d04f9c48aa0800189283608bf57416ac75cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49236
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC generates EC_MKBP_EVENT_DP_ALT_MODE_ENTERED when USB-C
connections enter DP alt mode, which should wake the system from S3.
Configure S3 wake events to include MKBP so this actually wakes
the system.
BUG=b:174121852
BRANCH=zork
TEST=Generating DP event on MKBP via EC console wakes morphius
Change-Id: I8100c6253e8e5cae91586c4f2f45d66c15fecc6d
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add enable acp_i2s_use_external_48mhz_osc flag and then
WWAN sku will use external clock source at next build.
BUG=b:174121847
BRANCH=zork
TEST=build vilboz and check MISC_CLK_CNTL1.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ida747938373f648524b1e7f34bc69e372a69c4f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48556
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused code that appears to be left over from grunt.
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Id5bdb1c957342d55c5e6378c503b8d90da050601
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
set APU_EDP_BL_DISABLE(GPIO_85) to low to avoid the VARY_BL fast than
APU_DP_BLON.
BUG=b:171954512
BRANCH=zork
TEST=validate the panel sequence with scope.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ia6d3f4335583bb2d91a6bce96d89cff84247d0ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This is used as a signal to show the system state. It hadn't been used
up to this point as we're not currently using S0i3, but the fingerprint
sensor will use it to go into a low power mode, so set it appropriately
on Trembyle. Dalboz devices don't use the FPMCU, but set there as well
so that the state matches.
BUG=b:174695987
TEST=Verify GPIO state in S0 and S3 with the EC
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ibc725905909830d44f77c2498a26edf6d7a3dc05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48255
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Vincent Palatin <vpalatin@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From spec, [31:28] "HS DC Voltage Level Adjustment" is "TXVREFTUNE0".
correct rx_vref_tune -> tx_vref_tune
BUG=None
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I27003a952d8f8bdd8fe52af8a37010e23ee9cdfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
As a part of trying to get our boot time as low as possible, any delays
in the code should try to be refactored out. This removes the 50ms
delay in the WIFI sequence by enabling power and putting the wifi module
into reset in bootblock, then bringing it out of reset in ramstage.
This is significantly longer than the 50ms requirement. The reset GPIO
was already being set high in ramstage, so that code didn't need to be
added.
BUG=b:171513520
TEST=Boot on boards with different module types, WIFI works on both.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I211d3da338ad368d1f011f03cf7d05121c057075
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
GPIO 86 should be set high on boot to save power.
BUG=b:173340497
TEST=Build only
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I31ef1d2a1967d82ba5370462783a909417088d2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
When the system shuts down, turn the fingerprint sensor off. This sets
the GPIOs correctly for the next boot. The fingerprint sensor was
previously left on, and was just powering down when the rails went low.
On suspend, the fingerprint sensor stays awake and puts itself in a low
powerstate mode based on the SLP_Sx_L pin states.
BUG=b:171837716
TEST=Fingerprint sensor still works after S3, GPIO state on the boot
following a shutdown is low.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I3837b58372d8f4a504535e76bd21c667d68f8995
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47311
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At this point, the zork platform will only use psp_verstage, so remove
the VBOOT_STARTS_IN_BOOTBLOCK option and set code for VBOOT_STARTS-
BEFORE_BOOTBLOCK to always be used.
TEST=Build & Boot Morphius
BRANCH=Zork
BUG=b:172848137
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I30d90fe82c37966a860b52c07a3550dcecf8d19d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a function that initializes GPIOs based on the sleep type that
the system is coming back from. This allows initialization of the
fingerprint GPIOs which need to be handled differently between wake
from S3 and boot from S5.
On initial boot, the state of the FP sensor could be either
enabled or disabled. Because of this, on boot, we power off
the sensor for >200ms, to reset its state, then power it back on.
In suspend/resume, the fingerprint sensor should remain powered
the entire time.
If fingerprint is disabled on the trembyle-based board, set the pins
to no-connect. Dalboz doesn't have fingerprint and the GPIOS are
configured differently due to the FT5 chip having fewer GPIOS than
FP5, so nothing needs to be initialized there.
There were also a couple of trivial comment clean ups regarding the
FPMCU GPIOS.
BUG=b:171837716
TEST=Boot & Check GPIO states.
BRANCH=Zork
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I16a2e621145782e0a908bb3e49478586c09a0e0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use command below to change the variable globally.
sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \
--exclude-dir=build --exclude-dir=crossgcc`
BUG=b:171334623
TEST=Build
Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
We all knew this was coming, 32 bits is never enough. Doing this early
so that it doesn't affect too much code yet. Take care of every usage of
fw_config throughout the codebase so the conversion is all done at once.
BUG=b:169668368
TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG
and verify the console print contained that bit.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since google_chromeec_cbi_get_board_version and google_chromeec_cbi_get_fw_config both call cbi_get_unit32 and return 0 as success, non-zero as failure. Let's add more readability for the false condition.
BUG=None
TEST=check with empty CBI value
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia49ac1ee35302f8f6afe8c0eb8e13afdf36c5b2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46566
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add generic wifi ACPI entry for wake on lan event.
Change configuration of GPIO 2/WIFI_PCIE_WAKE_ODL to SCI.
BUG=b:162605108
TEST=$ iw phy phy0 wowlan enable disconnect
$ cat /proc/acpi/wakeup | grep WF
WF00 S3 *enabled pci:0000:01:00.0
$ powerd_dbus_suspend
Reboot wifi router, DUT wakes up
BRANCH=zork
Change-Id: Idbeb2cfbc4995b8382ffc26cbe7b53764fc9252d
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45745
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I71ee54116ade4d6826dffc31ee879a70d3fc967f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To remove the xhci0_force_gen1 and use usb3_port_force_gen1 instead.
The xhci0_force_gen1 is used for force all port on xhci0 to USB3 GEN1.
Now variant can use the usb3_port_force_gen1 to customize which port
it needs to limit.
BUG=b:167651308
BRANCH=zork
TEST=Build, verify the USB3 speed in gen1
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: If5f0c1f22d8c98c4461f09d074bf082c340b14d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add support for trackpoint wakeup from S3 by adding device events to
mainboard and defining for morphius.
BUG=b:160345665
BRANCH=zork
TEST=tested trackpoint wake from S3 on morphius DVT
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Change-Id: I982f0f4b60fbaeb389774531e1dee83da77cb8a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Configure EMMC_RESET_L (GPIO68) to drive high by default. As per JEDEC
specification for eMMC, RST_n_FUNCTION defaults to temporarily disable
reset using RST_n signal (which is connected to EMMC_RESET_L on
zork). Chrome OS platforms do not configure RST_n_FUNCTION thus making
the reset signal unused. The spec also says that there are no internal
pulls on the card and hence the RST_n signal should be driven
appropriately to prevent the input circuits from flowing unnecessary
leakage current.
Thus, even though the line remains unused, since it is connected in
hardware, this change drives EMMC_RESET_L to high.
BUG=b:169222156
BRANCH=zork
TEST=emerge-zork coreboot
eMMC DUT reboot/suspend x100 iterations pass
Change-Id: I9feb826eec8a8cdad5e2bd7efcbb1dcf96185dfd
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
They should be tuned per board to get the best signal and boot time.
This fixes the HS400 preset, so it's correctly set to A. It also changes
the SDR50 and DDR50 presets to B. We can't boot correctly when DDR50 is
set to A.
I chose 1 as the init kHz value since that's what depthcharge uses to
calculate the init clock.
BUG=b:159823235
TEST=Boot Ezkinil and dump SDHCI preset registers.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie2f3497b65d771820ab1a803fec73265547f8906
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Fingerprint interrupt (FPMCU_INT_L) is level triggered and not edge
triggered. Also, we are using GEVENT for wake from fingerprint and
not the GPIO IRQ wake. Thus, the irq property exposed in ACPI tables
does not need to be set to indicate wake for the IRQ.
This change updates GPIO table to configure the pad as level triggered
and drops the wake attribute for irq_gpio in overridetree.
BUG=b:165612778
BRANCH=zork
TEST=Verified that fingerprint still works in S0 and to wake device
from S3.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I9007e5b0882ac1a6770db52d651218998f6d750d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
I plan on adding another eMMC parameter. This refactor keeps the config
contained in a single struct.
BUG=b:159823235
TEST=Build test
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4b57d651ab44d6c1cad661d620bffd4207dfebd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That devicetree setting is about the Audio Co-Processor and not ACPI.
BRANCH=zork
Change-Id: I7f376371ee094392d4434340c77f0fc8d0d8e4e1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:149970243
BRANCH=zork
Change-Id: I0b31466c5a991b02cef3432942f8de45805fe546
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44891
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:149970243
BRANCH=zork
Change-Id: Ie3fc83484c6ce769956dc8e6e57194ffebb4f5b0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44890
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SATA is currently turned on in the Dalboz and Trembyle base board
variant devicetrees, even though no Google/Zork device uses SATA; for
mass storage they either use eMMC or NVME PCIe SSDs. This patch disables
both the SATA PCIe device and the bus where it was the only enabled
device on. The next patch in this patch train sets a new FSP-M UPD
setting
BUG=b:162302027
Change-Id: Ie7773d9dcb0518c3e01bdd0af23b62268ab64694
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44068
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch all zork boards to use generated generic SPDs from spd_tools.
HMAA1GS6CMR6N-VK is unused by Ezkinil, and all other boards, so it was
removed.
picasso/Makefile.inc was updated to populate the 2nd APCB channel based
on APCB_POPULATE_2ND_CHANNEL. This removes the need to suffix spd
entires with _x1/_x2.
Command to generate files:
$ find src/mainboard/google/zork/variants/ -maxdepth 1 -type d | grep -v '/$' | while read b; do
n=$(basename ${b});
if [ "${n}" = "baseboard" ]; then
continue
fi
go run util/spd_tools/ddr4/gen_part_id.go src/mainboard/google/zork/spd \
src/mainboard/google/zork/variants/${n}/spd \
src/mainboard/google/zork/variants/${n}/spd/mem_parts_used.txt
done
BUG=b:162939176
TEST=Boot ezkinil and dalboz check dmidecod -t17
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I0553858f83d3d1e90cf35bece108768f004a29a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44480
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The zork devices use the ACP (audio co-processor) and the I2S interface
for audio and not the HDA (HD audio) device and interface.
BUG=b:158535201,b:162302028
BRANCH=zork
TEST=Equivalent change on Mandolin disabled the non-GPU HDA device with
the corresponding FSP change applied.
Change-Id: I6c7de881cff8398fe416151fab219142d4fc904a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove references to clk_pm_support which is currently ignored
by Picasso AGESA FSP.
BUG=b:161218965,b:162423378
TEST=Build test Trembyle and Dali, boot to ChromeOS 5 times each
Change-Id: Ic5d6abc56821863b68e45c11763f00d2b6410983
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44556
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up of bt reset_gpio removal function.
TEST=Boot and observe log showing bt reset_gpio was removed
BUG=b:157580724 - Add reset_gpio for Bluetooth
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I1d40ad16dd3c624d4be89d9eea1835cc4e72c03d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44273
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Those flags already get unconditionally set in soc/amd/picasso/acpi.c.
Change-Id: I978c7d67480499d92c193d5bb87bc876211187db
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add helper function variant_get_daughterboard_id() to read
daughterboard id bits (0-3) in firmware configuration table in CBI.
BRANCH=none
BUG=b:162344105,b:152817444
TEST=Check if daughterboard id bits (0-3) can be read from FW_CONFIG.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: Ia3c882439bfbe6da28be2df0ec0c976d5c142677
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44424
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After confirming that all zork variants and phases have valid
FW_CONFIG value in CBI, this patch is dropping FW_CONFIG validity checks
like VARIANT_HAS_FW_CONFIG and VARIANT_BOARD_VER_FW_CONFIG_VALID in Kconfig
and will also remove associated helper functions.
BRANCH=none
BUG=b:162344105,b:152817444
TEST=Check if FW_CONFIG bits can be read in coreboot and FW_CONIFG helper
function do not return 0 if board has a valid FW_CONFIG in CBI.
Signed-off-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Change-Id: I633dc7c500ef8759f3fffb0db6b76d96257c3c9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Starting with v3.6 of reference schematics, headphone jack interrupt
is moved to a standard GPIO instead of using CODEC_GPI. Thus, we no
longer need I2S wake to be enabled in the ACP for boards using v3.6+
version of schematics.
This change sets `acp_i2s_wake_enable` and `acp_pme_enable` to default
0 in baseboard devicetrees and overrides to 1 in update_hp_int_odl()
if the board is still using older version of reference schematics.
BUG=b:159934887
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I44b40db95b5148fe483c7340c5bd0d58627970a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44403
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB OC pin mapping is similar enough to move it to the base board
and just have two overrides for trembyle, which is based on an older
version of the schematics, and one override for woomax, which doesn't
use one USB port.
BUG=b:163081097
Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was
never really used on any of the zork variants. Starting with v3.6,
GPIO_89 is left unused in schematics.
This change configures GPIO_89 as PAD_NC in baseboard GPIO
table. Since EN_DEV_BEEP_L still needs to be driven high to allow
speakers to work, GPIO_89 is configured as PAD_GPO driven high on
pre-v3.6 schematics.
BUG=b:62108046
Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for touchscreen power control using:
* GPIO_90 for trembyle based boards
* GPIO_32 for dalboz based boards
By default, baseboard tables configure these GPIOs as PAD_GPO driven
low and override trees expose these pads as enable_gpio to be used by
ACPI power resource.
In order to support pre-v3.6 boards, override tables configure these
pads as PAD_NC and drop the enable_gpio setting from device tree based
on board version.
BUG=b:161935640, b:162747210
Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
v3.6 of reference schematics have switched the polarity of reset
signal to touchscreen controller from active high to active low. This
change updates the default configuration in baseboard gpio tables to
set the reset GPIO to output low and override tables in variants to set the
reset GPIO to output high. Additionally, devicetree by default exposes
ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6
boards, reset GPIO is updated to ACTIVE_HIGH based on board version.
BUG=b:161937506
Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Create function update_dmic_gpio to update DMIC GPIO for ACP machine and
use find_dev_nested_path function for consistency.
BUG=None
BRANCH=None
TEST=None
Change-Id: I96cf207f24c6117d98ff2bf7e6e5cd282489e805
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44158
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
HP_INT_ODL is no longer connected to CODEC_GPI in schematic version 3.6.
Split variant_audio_update into update_dmic_gpio and update_hp_int_odl.
Changed GPIO_29 from PAD_NC to PAD_GPI in Trembyle. Changed GPIO_84 from
PAD_NC to PAD_GPI for Dalboz. Changed HP_INT_ODL to appropriate pin in
both boards devicetree.cb.
BUG=b:161938476
BRANCH=None
TEST=None
Cq-Depend: chromium:2335424
Change-Id: I05ffb063ab99823d07be6eaa911efbde3cc4ff55
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44157
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS and
VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS. Added helper functions to check
if variant uses v3.6 and if variant uses CODEC GPI.
BUG=b:161938476
BRANCH=None
TEST=None
Change-Id: If86e1ea3c02db354c7b410f1bbc1daacb483cc51
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44156
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In kernel clk for AMD SoCs we expose a generic clk by the name oscclk1.
This oscclk1 is a fixed 48Mhz frequency clk in RV.
In Zork oscout system clock is linked to rt5682 mclk. Setting mclk-name to
oscclk1 tells rt5682 driver its mclk is oscclk1.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: Ic565e8e0573e085e5759b2d3688cc0a4533b67fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There was a mix of open coding DXIO logical lane numbers and clkreq
pins. And there are separate macros depending on the baseboard
as well as processor type. Remove the indirection and supply the values
directly in the descriptors.
BUG=b:162423378
Change-Id: I779cb0a514e3b668265e6039d6e7e7bd0f3d49ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:162010077
Change-Id: Iba3e3ec62cdfd818077017abd28fa754c2ae7797
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add bluetooth reset gpio 143 to dalboz baseboard devicetree
Add bluetooth reset gpio 14 to trembyle baseboard devicetree
Remove bluetooth reset_gpio when not supported on a specific board
variant.
BUG=b:157580724
TEST=Boot Ezkinil with Realtek 8822CE, observe log
[ 12.240720] Bluetooth: af_bluetooth.c:bt_init() HCI device and connection manager initialized
[ 12.249272] Bluetooth: hci_sock.c:hci_sock_init() HCI socket layer initialized
[ 12.256520] Bluetooth: l2cap_sock.c:l2cap_init_sockets() L2CAP socket layer initialized
[ 12.264575] Bluetooth: sco.c:sco_init() SCO socket layer initialized
[ 12.273700] usb 3-2: GPIO lookup for consumer reset
[ 12.273702] usb 3-2: using ACPI for GPIO lookup
[ 12.273705] acpi device:18: GPIO: looking up reset-gpios
[ 12.273707] acpi device:18: GPIO: looking up reset-gpio
[ 12.273711] acpi device:18: GPIO: _DSD returned device:18 0 0 0
[ 12.273737] gpio gpiochip0: Persistence not supported for GPIO 14
[ 12.273960] usbcore: registered new interface driver btusb
Change-Id: I14e3ef099d5b8f48c915b41284039b3508dec975
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This applies what commit 79572e4f32f844f60338d1aafdba6b94f4111a5c does
to the devicetree settings of the zork devices.
Change-Id: Ife94818d771f137e56c51ad1598148f60fcf5345
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43820
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:161923068
Change-Id: I67f23c0602e345fbd806e661a4462cf07f93ef64
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43783
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since FSP pre-populates the UPD struct with the non-zero default values,
coreboot shouldn't set them to zero in the case that they aren't
configured in the board's devicetree. Since all parameters being zero is
a valid case, this patch adds another devicetree option that applying
the devicetree settings for the USB2 PHY tuning depends on being set.
BUG=b:161923068
Change-Id: I66e5811ce64298b0644d2881420634a8ce1379d7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43781
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change does the following:
a. USI_REPORT_EN is no longer set to high in coreboot. Instead
GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this
pad as required.
b. Appropriate delays are added for power-down sequencing:
- Delay after REPORT_EN is disabled - 1ms
- Delay after RESET is asserted - 1ms
BUG=b:159501288
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPIO_91 is added to ACPI using the device tree entry for codec. So,
this change drops the TODO from GPIO table.
Change-Id: I9c2e91465ab554126531f8512028360ae5fb316d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures all missing pads in ramstage for dalboz
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Ia30da908d3827177a7b3594ffba38bff81018ab9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures all missing pads in ramstage for trembyle
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops PULL_UP configured on pads in early_gpio table since
these pads have external pulls.
BUG=b:154351731
Change-Id: Id270e7b4f83dfa942655f513776a3b1c15c9678d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Most of the DXIO descriptors are used to configure PCIe engines and
lanes, but on Picasso system some of the DXIO lanes can also be
configured as SATA or XGBE ports.
Change-Id: I28da1b21cf0de1813d87a6873b8d4ef3c1e0e9dd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43675
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The lane numbers in the PCIe/DXIO descriptor are the logical and not the
physical ones, so add logical to the corresponding field names of the
fsp_pcie_descriptor struct.
Change-Id: I7037fed225119218e87593932815aff815e83ff8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These methods are empty and the kernel treats these as optional.
BUG=b:153001807, b:154756391
TEST=Suspend and resume trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops internal pulls for dalboz reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP1800_S0
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_32: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops internal pulls for trembyle reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP3300_A
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_90: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change switches zork devices to use the newly added
i2s_machine_dev driver in devicetree rather than passing
dmic_select_gpio in SoC config.
BUG=b:157708581
Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops mainboard.asl from zork because none of the objects
defined in it are used.
BUG=b:153879530
Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Global variable `PMOD` that stores the interrupt mode used by OS is
required by all mainboards. This change moves the variable definition to
globalnvs.asl under picasso.
Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC
until _PIC() method is called by OS. Thus, this change also updates the
default value of PMOD as 0 i.e. PIC mode.
BUG=b:153879530
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I731c03d965882281a7a23f55894451210ba72274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables ACP_PME_EN and ACP_I2S_WAKE_EN for dalboz and trembyle
boards using devicetree settings.
BUG=b:161328042,b:146317284
Change-Id: Ie367a9ba878a1892177df874bbcb8005efeb0880
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43496
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit 56da63c3dc3f50cfac541c779b608e1bae9e635c removed overriding that
field in the FADT.
Change-Id: I0c8ff9ab125129dc856949c47a3a0c14e4109c73
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43417
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The kernel already clears this: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/acpi/acpica/hwregs.c;l=390
No reason to have the firmware do it as well.
BUG=b:153001807, b:154756391
TEST=Build Trembyle, boot, suspend, and resume and didn't see any ACPI
errors.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia5c79fb95dc885eaef8abc4257b6ba18c1ef1b66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
PMx0EE is not defined in the Picasso PPR.
BUG=b:153001807, b:154756391
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I98caf0cd2d0bdcf19de2b945dcf74f5cf7354769
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in
romstage. This change moves the configuration of PCIe related GPIOs to
variant_pcie_gpio_configure() to keep all the configuration for WiFi and
non-WiFi PCIe pads in one place. It also drops the function
variant_romstage_gpio_table() as it is unused.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the power and reset GPIO configuration for non-PCIe devices is
dropped from romstage GPIO table, the tables for pre-v3 and v3 version of
schematics are exactly same. So, this change drops the duplicate table and
also removes the check for v3 schematics when configuring the pads in
romstage.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops power and reset control for non PCIe devices in
romstage for dalboz reference as this is not required.
+---------------------------------------------------------------------------------------+
| GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume |
| # | | Pull | Pull | | | |
+---------------------------------------------------------------------------------------+
| 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on |
| | | | | | (because of | (since power is not|
| | | | | | internal PD) | disabled when |
| | | | | | | entering S3) |
+---------------------------------------------------------------------------------------+
| 6 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on |
| | | | | | (because of | (since trackpad |
| | | | | | internal PU) | is wake source) |
+---------------------------------------------------------------------------------------+
| 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
| 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
| 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
| 141 | USB_HUB_RST_L | 10K PU | PD | S0 | Asserted | Asserted |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
+---------------------------------------------------------------------------------------+
| 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off |
| |_PS2 (pre-V3) | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
GPIO_140 starts deasserted out of reset and S3 resume, but gets
asserted in ramstage since it is eventually deasserted by OS using
ACPI methods.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie792a5a9d6420763ff10d1e475c094b6ee514888
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops power and reset control for non PCIe devices in
romstage as this is not required.
+---------------------+--------------------------------------------+--------------------+
| GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume |
| # | | Pull | Pull | | | |
+---------------------------------------------------------------------------------------+
| 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on |
| | | | | | (because of | (since power is not|
| | | | | | internal PD) | disabled when |
| | | | | | | entering S3) |
+---------------------------------------------------------------------------------------+
| 13 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on |
| |_PS2 | | | | (because of | (since trackpad |
| | | | | | internal PU) | is wake source) |
+---------------------------------------------------------------------------------------+
| 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
| 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
| 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted |
| | | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
+---------------------------------------------------------------------------------------+
+---------------------------------------------------------------------------------------+
| 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off |
| |_PS2 (pre-V3) | | | | (because of | (because of |
| | | | | | internal PD) | internal PD) |
| | | | | | | |
+-----+---------------+---------+---------+-------+----------------+--------------------+
GPIO_140 starts deasserted out of reset and S3 resume, but gets
asserted in ramstage since it is eventually deasserted by OS using
ACPI methods.
BUG=b:154351731
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ieadc62f1a13857209cf0a62f204efb9278e0e97d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change keeps USI_RST(GPIO_140) asserted in ramstage since it gets
deasserted by OS using ACPI methods.
BUG=b:160854397
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I8feced788e471a0efb2358d42b2146df04fb7a0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43461
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change keeps pen power enabled in sleep state to allow it to
charge in S3.
BUG=b:155422911
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6190496653878327f34a01f6a743db474d32e929
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This information is redundant since it's already specified in
baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb
domain 0 is still required because sconfig uses it as an identity anchor
to match devicetree and overridetree.
BUG=b:157580724
TEST=Boot zork, usb functional
Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no reason to create a named variable. We can just return the
package.
BUG=b:153001807, b:154756391
TEST=None
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f8f0362adf5ea5f026d0ba5ac6ac917fa160142
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The ACPI specification, version 2.0 says:
_BFS is an optional control method.
So, remove them. They have been copy-pasted around quite a bit, and do
not do anything useful. Plus, it's deprecated in later ACPI versions.
Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Morphius cannot support 100Mhz fast SPI causing it to not boot.
Downgrade all zork boards to fast=66mhz and normal=33mhz to be safe.
BUG=b:161233767
TEST=Boot morphius
Change-Id: I7744dd0cb8dede985fbdc28a64385e0bc4048402
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43459
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add USB ports, USB user-facing camera and USB bluetooth to devicetree.
USB ports 4 and 5 are duplicated for picasso and dali.
BUG=b:158096224
TEST=Boot Trembyle and Dalboz, Dump acpi tables
Change-Id: Icf8628d91e27a3afdc5fd67a53b44089c809da87
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Split zork baseboard devicetree between dalboz and trembyle.
The devicetree is simply duplicated, no other changes in this commit.
BUG=b:158096224
TEST=Build coreboot for zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5b26770790092c69db9567fa4337edd21a6ed809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CB:43224 ("mb/google/zork: Add helpers for v3 schematics and wifi
power enable") added helper functions for determining if a board uses
v3 schematics. However, it introduced a regression by adding a wrong
check for variant_uses_v3_schematics() in variant_audio_update(). This
change fixes the check to ensure that dmic_gpio is updated when
variant is not using v3 schematics.
BUG=b:161141258,b:161128964
TEST=Verified on trembyle that trackpad works again (it was broken
because of the regression).
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I0e6ad844f68cface7b545f1547bd94470c30dde4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43415
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change SPI speed from 66MHz, mode 1-1-2 to 100MHz mode 1-2-2.
“1-2-2" means command, address and data are transmitted
through 1 wire, 2 wire and 2 wire, respectively.
BUG=b:160603142
TEST=Boot on trembyle, verify register settings.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I14f96e3c085126c70e64ef3a3f5b7b54ce6cbffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43306
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This matches the other methods.
BUG=b:154756391
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6ba1fc5756c17da4dc1727425af17c4582c01a18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds following two helper functions:
1. variant_uses_v3_schematics() - Check whether the variant is using
v3 version of schematics.
2. variant_has_active_low_wifi_power() - Check whether the variant is
using active low power enable for WiFi.
In addition to this, Kconfig options are reorganized to add two new
configs - VARIANT_SUPPORTS_PRE_V3_SCHEMATICS and
VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH. This allows the helper
functions to return `true` early without checking for board version.
Eventually, when a variant decides to drop support for pre-v3
schematics, it can be dropped from selecting
VARIANT_SUPPORTS_PRE_V3_SCHEMATICS. Similarly, when the variant
decides to drop support for active high power enable for WiFi, it can
be dropped from selecting VARIANT_SUPPORTS_WIFI_POWER_ACTIVE_HIGH.
Change-Id: I62851299e8dd7929a8e1e9a287389abd71c7706c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43224
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the configuration of GPIO_137 to happen in ramstage
since there is nothing in coreboot that requires the state of write
protect GPIO for zork.
Change-Id: Ibaf8e7d9dd5d13a9b39b10ac0174de345b8380f5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43223
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply the default USB2 phy tuning parameter for Zork family
BUG=b:155132211
TEST=Build, verified the default value been applied on trembyle
and the USB2 device works well.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I1f00b04173796d70147e232bafa405487b0761e1
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2260216
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the function `variant_romstage_entry()` which is
unused on zork.
Change-Id: I140ab3e837971c4c7dbef5d27616043b5fc6c2c9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The eSPI polarity macros were reversed. Those are fixed so adjust
the corresponding values related to the correct expectations of
the IRQ path: eSPI virtual wire IRQs are active level high. The EC
sends active level high virtual wire IRQs. The default interrupt
encodings in ACPI for P2/S devices are active edge high. Therefore,
there is no need to override anything.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change moves the generation of I2SM ACPI device from static asl
file to runtime generation by ACP device driver. dmic_select_gpio is
set to match version 3+ of Trembyle and Dalboz schematics. In order to
maintain backward compatibility, dmic_select_gpio is updated at
runtime using variant_audio_update for board versions that are prior
to version 3 of reference schematics.
The only difference from static generation is that the device I2SM is
added under ACPD (i.e. ACP device) instead of CREC (Chrome EC
device). It does not make any functional difference from the kernel
perspective.
BUG=b:157603026
TEST=Verified that the following device gets generated in SSDT:
Scope (\_SB.PCI0.PBRA.ACPD)
{
Device (I2SM)
{
Name (_HID, "AMDI5682") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "I2S machine driver") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x000D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"dmic-gpios",
Package (0x04)
{
\_SB.PCI0.PBRA.ACPD.I2SM,
Zero,
Zero,
Zero
}
}
}
})
}
}
Verified audio via speakers and mic input.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I5d1602c7f719eef9487ddea68e429d27408f9a76
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253638
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, EC wake signal (GPIO_24) is configured early on in
romstage. However, there is no need for that since EC wake is not
really required to be configured until ramstage. This change moves
GPIO_24 configuration to happen in ramstage.
BUG=b:159832123
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6949dcd7c866df2fa028c7b2e7f347cec988e309
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42952
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the pad configurations for wake lines as
follows:
1. Pen eject wake signal needs to be configured as PAD_WAKE i.e. wake
using GPIO controller block. This is because pen eject signal is not
dual routed and the trigger filtering is set by the kernel driver
differently for S0 and S3 wake. Hence, it cannot use SCI GEVENT and
instead has to fall back to using GPIO controller wake.
2. All other wake signals (EC, trackpad, fingerprint) need to be
configured as SCI. This allows OS to enable/disable wake from these
sources if required. Example: powerd disables wake from trackpad when
in tablet mode. Hence, all other wake sources use SCI.
BUG=b:159832123
TEST=Verified wake using pen eject and EC.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id8cd5926f223db51a689ed8948040b8070cf1680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42951
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for pen insert/eject operations in S0 and
wake on pen eject from S3 for morphius.
BUG=b:158814699,b:158719244
Change-Id: I3530a0aa83ec69559436687205c64524b862799b
Signed-off-by: Kevin Chiu <kevin.chiu@quanta.corp-partner.google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops macros for GPIOs which are unused or don't really
require extra indirection (same across all variants).
BUG=b:159283649
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1a94327103a419f26b1d7feda4c995363ada7281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops GPIO_27 configuration for trembyle reference boards
since it is unused.
BUG=b:159453643
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I57dd78e8abcc61802ca85158e7ff348460ad1d8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A late change went into v3+ of reference schematics which inverted
EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is
incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz
reference. However, some variants are built with v3+ reference
schematics, but without the inversion of EN_PWR_WIFI polarity. Thus,
we need to add support for following combinations:
1. Pre-v3 Schematics
2. V3+ Schematics
3. V3+ Schematics + Active low wifi power
This change adds a new Kconfig
`VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum
board ID that has EN_PWR_WIFI active low in hardware. Variants that
missed this change in V3+ integration (berknip and vilboz) have board
IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this
defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS.
BUG=b:159749536
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|