summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer/variants
AgeCommit message (Expand)Author
2021-03-19mb/google/volteer/var/elemi: Config GPP_B7/GPP_B8 as NCWisley Chen
2021-03-17sar: Fix semantics of `get_wifi_sar_cbfs_filename()`Furquan Shaikh
2021-03-15mb/google/volteer/variant/lindar: Disable SA GV for Samsung memory with wrong...Kevin Chang
2021-03-15mb/google/volteer/variants: Disable non-existing BT PCI interface and add BT ...Cliff Huang
2021-03-15mb/google/volteer: Create collis variantFrankChu
2021-03-15mb/google/volteer/variants/copano: Add gpio-keys ACPI node for PENHhao_chou
2021-03-15mb/google/volteer: Add WiFi SAR table support for Lindar/LillipupKevin Chang
2021-03-15mb/google/volteer/var/lindar: Add FW_CONFIG WIFI_SAR_ID fields in devicetreeKevin Chang
2021-03-10drivers/i2c: sx9310: Replace register map with descriptive namesGwendal Grignou
2021-03-05mb/google/volteer: Fix FPMCU pwr/rst gpio handlingNick Vaccaro
2021-03-04mb/google/volteer/variants/copano: Describe USB ports in devicetreehao_chou
2021-03-03soc/intel: Retype `CnviBtAudioOffload` devicetree optionAngel Pons
2021-02-26mb/google/volteer/var/elemi: Configure IRQ as level triggered for elan_tsWisley Chen
2021-02-26mb/google/volteer: add variant_ramstage_init()Nick Vaccaro
2021-02-25mb/google/volteer: Fix eldrid DPTF's passive and critical policiesTim Wawrzynczak
2021-02-25mb/google/volteer/variants/drobit: Update DPTF parametersWayne3 Wang
2021-02-12mb/google/volteer: Correct AT24 NVM address sizeDaniel Kang
2021-02-11mb/google/volteer/variants: Remove unneeded whitespace before tabElyes HAOUAS
2021-02-10mb/google: order matters in mem_parts_used.txtPaul Fagerburg
2021-02-10mb/google/volteer/var/voxel: Add settings for noise mitgationSheng-Liang Pan
2021-02-10mb/google/volteer: Enable external bypass, clkgate & phygateShreesh Chhabbi
2021-02-07mb/google/volteer/var/voxel: Add gpio-keys ACPI node for PENHSheng-Liang Pan
2021-02-04mb/google/volteer: update thermal table for EldridNick Chen
2021-02-03mb/google/volteer/variants/drobit: Configure USB2 port for Type-CHEADmasterWayne3_Wang
2021-02-03mb/google/volteer/var/voema: Enable EEPROM for OV2740David Wu
2021-02-03mb/google/volteer/variant/copano: support regular/numpad touchpadZhuohao Lee
2021-02-03mb/google/volteer/variants/drobit: Modify touchpad I2C sequenceWayne3_Wang
2021-02-03mb/google/volteer/variants/drobit: Add TBT PCIE rp setting for drobitWayne3_Wang
2021-02-01mb/google/volteer: Drop boldar variantFurquan Shaikh
2021-01-26mb/google/volteer/var/voema: Add camera ACPI configurationDavid Wu
2021-01-25mb/google/volteer/eldrid: Use #define symbols for usb2_ports configTim Wawrzynczak
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
2021-01-18mb/google/volteer/var/elemi: Configure USB2 portsWisley Chen
2021-01-16mb/google/volteer: do UART pad config at board-levelMichael Niewöhner
2021-01-15mb/google/volteer/var/voema: Configure USB2 ports for Type CDavid Wu
2021-01-14mainboard/volteer: Configure UsbTcPortEn valueBrandon Breitenstein
2021-01-13mb/google/volteer/variants/delbin: Update PL1 min and max for DelbinDeepika Punyamurtula
2021-01-12mb/google/volteer: Configure Voxel USB2 ports for Type CJohn Zhao
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
2021-01-08mb/google/volteer: Configure Delbin USB2 ports for Type CJohn Zhao
2021-01-08mb/google/volteer: Update copano device treehao_chou
2021-01-08mb/google/volteer: Add GPIO to copano supporthao_chou
2021-01-08mb/google/volteer: Copano: Update SPD tablehao_chou
2021-01-07mb/google/volteer/var/elemi: Tune i2c frequencyWisley Chen
2021-01-06mb/google/volteer/var/voema: Update Aux settings for Port 0David Wu
2021-01-05mb/google/volteer/var/voema: Enable IPU for voemaDavid Wu
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
2020-12-24mb/google/volteer/var/voema: Disable PCIe 7 and 8 for WLAN and SD cardDavid Wu
2020-12-24mb/google/volteer/var/voema: Enable RTD3 for the NVMe deviceDavid Wu
2020-12-22mb/google/volteer: Add GPIO to drobit supportFrankChu
2020-12-22mb/google/volteer: Update SPD table for drobitFrankChu
2020-12-22mb/google/volteer: Update drobit device treeFrankChu
2020-12-21volteer/variants/eldrid: Enable RTD3 for the NVMe deviceNick Chen
2020-12-11mb/google/volteer: Clean up romstage and ramstage UPDsTim Wawrzynczak
2020-12-11mb/google/volteer/variant/lindar: Correct IOM port configurationKevin Chang
2020-12-11mb/google/volteer: Improve type-C Port 1 USB2 Eye Diagram for delbinFrankChu
2020-12-11mb/google/volteer: Assert BT_DISABLE_L (GPP_A13) in early_gpio_tableAlex Levin
2020-12-10mb/google/volteer: Fix a few devicetree device refsTim Wawrzynczak
2020-12-09mb/google/volteer/variant/volta: add Synaptics touchpad.Sheng-Liang Pan
2020-12-08mb/google/volteer/variant/lindar: Add PMC.MUX.CONx device configuration and d...Kevin Chang
2020-12-08mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-12-08mb/google/volteer: Update I2C5 bus freq and devicetree.Stanley Wu
2020-12-08mb/google/volteer: ACPI nodes for volteer2_ti50Jes Klinke
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
2020-12-07mb/google/volteer/var/elemi: use devtree aliases for PMC MUX connectorsWisley Chen
2020-12-05mb/google/volteer/var/voema: Add MIPI camera supportDavid Wu
2020-12-05mb/google/volteer: Create copano variantFrankChu
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
2020-12-02mb/google/volteer: Add fw_config entries for boot deviceDuncan Laurie
2020-12-02mb/google/volteer: Add additional SD cards to device listDuncan Laurie
2020-11-30mb/google/volteer: Create drobit variantFrank Chu
2020-11-30mb/google/volteer/variants/delbin: Enhance I2C5 bus freq closer 400 kHzFrank Chu
2020-11-30mb/google/volteer/variant/copano: Add memory part supportNick Vaccaro
2020-11-29mb/google/volteer: eldrid: use devtree aliases for PMC MUX connectorsScott Chao
2020-11-25mb/google/volteer: Update Eldrid USB2 port settings in overridetreeNick Chen
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
2020-11-25mb/google/volteer/var/elemi: Add H5ANAG6NCJR-XNCWisley Chen
2020-11-24mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-11-24mb/google/volteer: fw_config: Add setting for new sd readersZhuohao Lee
2020-11-22mb/google/volteer: Remove unused devices for terrador and todorDavid Wu
2020-11-22mb/google/volteer/var/voema: Update gpio and devicetree settingsDavid Wu
2020-11-20mb/google/volteer/var/elemi: Update gpioWisley Chen
2020-11-20mb/google/volteer/var/elemi: enable Genesys Logic GL9763EWisley Chen
2020-11-20mb/google/volteer: Add keyboard layout to fw_configDuncan Laurie
2020-11-20mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by defaultDuncan Laurie
2020-11-20mb/google/volteer: Enable RTD3 for SD cardDuncan Laurie
2020-11-20mb/google/volteer/variants: Enable RTD3 for the NVMe deviceDuncan Laurie
2020-11-19mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16David Wu
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
2020-11-17mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequencyJohnny Li
2020-11-16volteer/variants/eldrid: Goodix touch panel power-on sequence tuningNick Chen
2020-11-16mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-09mb/google/volteer/eldrid: Describe the privacy_gpioRicardo Ribalda
2020-11-09mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu