Age | Commit message (Expand) | Author |
2021-03-01 | soc/intel/skylake: Clean up SD GPIO handling | Angel Pons |
2020-12-14 | soc/intel/skylake: Drop always-zero ProbelessTrace dt setting | Angel Pons |
2020-12-14 | soc/intel/skylake: Drop unreferenced PttSwitch dt setting | Angel Pons |
2020-11-13 | soc/intel/{skl,cnl}: replace PM ACPI timer dt option by Kconfig | Michael Niewöhner |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-21 | soc/intel,mb/*: get rid of legacy pad macros | Michael Niewöhner |
2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
2020-09-06 | mb/*: devicetree: drop now unneeded USBx_PORT_EMPTY | Michael Niewöhner |
2020-08-08 | soc/intel/skylake: Enable CIO depending on devicetree configuration | Felix Singer |
2020-08-08 | soc/intel/skylake: Enable SA IMGU depending on devicetree configuration | Felix Singer |
2020-08-08 | soc/intel/skylake: Enable SDXC depending on devicetree configuration | Felix Singer |
2020-08-07 | soc/intel/skylake: Enable thermal subsystem depending on devicetree | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable HDA depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable eMMC depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable TraceHub depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SMBus depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable LAN depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SATA depending on devicetree configuration | Felix Singer |
2020-07-26 | skylake boards: Factor out copy-pasted PIRQ routes | Angel Pons |
2020-05-18 | skylake: update processor power limits configuration | Sumeet R Pawnikar |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-04-06 | mb/google/poppy: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-04-02 | mb/google/poppy: Add support for ACPI brightness controls | Matt DeVillier |
2020-03-18 | mainboard/google: Remove copyright notices | Patrick Georgi |
2019-12-02 | mb/google/poppy: add VBTs for remaining variants | Matt DeVillier |
2019-08-02 | soc/intel/skylake: Make use of common thermal code for SKL | Subrata Banik |
2019-04-06 | {mb,soc/intel/skylake}: remove unused InternalGfx | Maxim Polyakov |
2019-03-01 | soc/intel/skylake: Unify serial IRQ options | Nico Huber |
2019-02-18 | soc/intel/skylake: Use real common code for VMX init | Nico Huber |
2018-11-15 | ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT config | Karthikeyan Ramasubramanian |
2018-07-11 | skylake: Remove "IshEnable" | li feng |
2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
2018-06-05 | soc/intel/skylake: Add option to skip coreboot MP init | Subrata Banik |
2018-04-27 | mb/google/poppy,soraka,nautilus: Enable xDCI | Furquan Shaikh |
2018-04-18 | mb/google/poppy/variants: Set VmxEnable to 1 | Furquan Shaikh |
2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
2018-02-16 | mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45W | Naresh G Solanki |
2018-01-30 | mb/google/poppy/variants/soraka: Update _PSV for TCPU | Furquan Shaikh |
2018-01-30 | mb/google/poppy/variants/soraka: Enable mode-aware DPTF | Furquan Shaikh |
2018-01-26 | mb/google/poppy/variants/soraka: Configure unused pins as NC | Furquan Shaikh |
2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
2017-12-19 | mb/google/poppy: Configure GPP_F3 as NC | Furquan Shaikh |
2017-12-11 | mb/google/poppy/variants/soraka: Tune I2C5 params | Furquan Shaikh |
2017-12-06 | mb/google/poppy: Remove variant_cros_gpios from variants | Furquan Shaikh |
2017-12-06 | mb/google/poppy/variants/soraka: Disable SPI TPM | Furquan Shaikh |
2017-12-05 | mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep Sx | Furquan Shaikh |
2017-11-30 | mb/google/poppy/variants/soraka: Set PCH thermal trip point to 75 degreeC | Subrata Banik |
2017-11-29 | mb/google/poppy: Add variant support for camera asl | Furquan Shaikh |
2017-11-28 | mb/google/soraka: configure WLAN_PE_RST gpio in early_gpio_table | Divya Chellap |
2017-11-09 | mb/google/{poppy,nautilus,soraka}: Disable deep S3 | Furquan Shaikh |
2017-11-03 | soraka: update pad reset config of WLAN_PE_RST to RSMRST | Divya Chellap |
2017-10-09 | skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPI | Furquan Shaikh |
2017-10-08 | mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM device | Furquan Shaikh |
2017-10-03 | mainboard/google/soraka: Reduce Wacom resume time | Rajneesh Bhardwaj |
2017-09-26 | soraka: Ensure I2C5 frequency is less than 400kHz | Furquan Shaikh |
2017-09-21 | mb/google/{poppy,soraka}: Enable LTR for Root port | Rizwan Qureshi |
2017-09-13 | mb/google/soraka: Update DPTF parameters | Wisley Chen |
2017-09-13 | mb/google/soraka: Fine-tune USB 2.0 port4 | Wisley Chen |
2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
2017-09-06 | mb/google/soraka: enable AER for PCIe root port 0 | Rizwan Qureshi |
2017-09-05 | mb/google/soraka: Camera PMIC run time power control | Naresh G Solanki |
2017-09-02 | mainboard/google/soraka: Remove wacom digitizer | Wisley Chen |
2017-08-30 | mainboard/google/soraka: Add stop gpio control to touchscreen device | Furquan Shaikh |
2017-08-30 | mainboard/google/soraka: Remove Atmel Touchscreen | Furquan Shaikh |
2017-08-29 | mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
2017-08-11 | mb/google/poppy: Update PL2 settings | Sumeet Pawnikar |
2017-08-04 | mainboard/google/soraka: Configure GPP_B8 in bootblock | Furquan Shaikh |
2017-08-04 | mainboard/google/soraka: Add gpio.c to bootblock | Furquan Shaikh |
2017-07-28 | mb/google/soraka: configure GPP_B8 to control WLAN_PE_RST | Rizwan Qureshi |
2017-07-24 | mainboard/google/soraka: pull high TOUCHSCREEN_STOP_L pin | Wisley Chen |
2017-07-23 | mainboard/google/{poppy,soraka}: Enable S0ix | Rajat Jain |
2017-07-22 | mainboard/google/poppy/variants/soraka: Update GPP_{D1,D2,B7} config | Furquan Shaikh |
2017-07-22 | mainboard/google/poppy/variants/soraka: Define separate gpio tables | Furquan Shaikh |
2017-07-13 | mainboard/google/soraka: add wacom touchscreen support | Wisley Chen |
2017-06-27 | mainboard/google/soraka: Update VR config settings | Rajneesh Bhardwaj |
2017-06-27 | mb/google/soraka: Remove MPS IMVP8 workaround | Rajneesh Bhardwaj |
2017-06-19 | mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cb | V Sowmya |
2017-06-14 | mainboard/google/{poppy,soraka}: Disable unused GSPI1 interface | Furquan Shaikh |
2017-06-14 | mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI node | Furquan Shaikh |
2017-06-09 | mb/google/soraka: Update UF camera i2c address | Naresh G Solanki |
2017-05-26 | mainboard/google/poppy: Add PowerResource for touchscreen device | Furquan Shaikh |
2017-05-24 | mb/google/soraka: Update camera sensor for soraka | Naresh G Solanki |
2017-05-19 | mainboard/google/poppy/variants/soraka: Add SPD for K3QFAFA0CM-AGCF | Furquan Shaikh |
2017-05-17 | mainboard/google/poppy/variants/soraka: Enable H1 I2C TPM | Furquan Shaikh |
2017-04-28 | mainboard/google/soraka: Add support for memory configs 1,2,7 and 8 | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy/variants/soraka: add soraka board | YH Lin |