summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus
AgeCommit message (Collapse)Author
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/octopus: add audio codec into SSFC support for MeepTony Huang
BUG=b:171757619 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I37390535e263b4b9547ad7307278e3360ba836bd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-01-08mb/google/octopus: add audio codec into SSFC support for BobbaMarco Chen
BUG=b:174118027 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Marco Chen <marcochen@google.com> Change-Id: Id37c4c5716ade0851cfcb24e12b390841e633ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-04mb/google/octopus: Add ACPI backlight controlsMatt DeVillier
Enables backlight control under Windows 10. Test: build/boot Windows 10 20H2 on google/ampton, verify display backlight controls functional. Change-Id: I779f7f3f5a111018fc7b5c50c5750a9eb815d670 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-21mb/google/octopus/var/phaser: Add support for G2TOUCH Touchscreenrasheed.hsueh
Add devicetree configuration for G2TOUCH Touchscreen controller. BUG=b:175513059 BRANCH=octopus TEST=build bios, check i2c bus and verify touch screen works fine Change-Id: Ib57597c4998f205c664e13befb4c44532b7dbd4f Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-16mb/google/octopus/variants/casta: Add support zinitix touchpadSeunghwan Kim
This change adds support zinitix touchpad for casta/bluebird. BRANCH=firmware-octopus-11297.B BUG=b:175618033 TEST=built and verified touchpad worked on casta Change-Id: I1a8f562de19d1a8160d52c65400553f0c68393e0 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48634 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Enable CBFS mcache on most chipsetsJulius Werner
This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Some older chipsets with insufficient SRAM/CAR space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-22mb/google/octopus: fix droid lte sku load specific wifi sar valueSheng-Liang Pan
This CL add droid lte sku 37 38 39 40 to load wifi_sar-droid.hex. BUG=none BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I55dda85b8f3e664d97834b712a2c6a48d1434010 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47697 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/octopus/variants/bobba: Add G2Touch touchscreen supportSheng-Liang Pan
Add G2Touch touchscreen support for bobba. BUG=b:171636614, b:169730666 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen work. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ia361a56c050d7cbd7325b3c09fc34d8707441cc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/octopus: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ic334816712370da63471135da8dd598ab02d54ef Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-06mb/google/octopus/variants/garg: Add new LTE SKUKevin Chiu
Add new SKU definition: Garg360 (LTE DB,1A2C,TS, no stylus, rear camera) SKU ID - 39 BUG=b:170708728 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ifec4e1360bd1aff3825bc6413b0a2ccd8b822075 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47015 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/octopus/var/fleex: Add variant.c into smm stageEric Lai
variant_smi_sleep is called in smm stage so we need to add variant.c into smm stage. Otherwise it will call the dummy one. BUG=b:168075958 BRANCH=octopus TEST=build image passed. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I41df1a30b119ab3e04f9ae01955b6044f137527f Reviewed-on: https://review.coreboot.org/c/coreboot/+/46847 Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/octopus/variants/dood: Add G2Touch touchscreen supportKenneth Chan
Add G2Touch touchscreen support for dood. BUG=b:171526389 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen work. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ica7d893de285c2dd1efcd43ac74919bdd5d5ac17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46675 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30mb/google/octopus/var/fleex: Disable XHCI LFPS power management by skuEric Lai
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:169645448 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a04320b0e2441dce540a5afdc461f12de45c41b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-10-27mb/google/octopus/var/garg: Disable XHCI LFPS power management by skuKevin Chiu
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. If this option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:171478764 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Change-Id: I213fed2b56f216747b2727b69f97d46d8c0c872e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46701 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-27mb/google/octopus/var/garg: fix LTE power sequence in reboot stateKevin Chiu
invoke LTE power off function to meet LTE power sequence while DUT is in reboot state. BUG=b:167565015 BRANCH=octopus TEST=build and verify on the DUT with LTE Change-Id: I825cefb524ddaf9a9cb6add31c2ee0eea484f978 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46022 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/octopus/var/fleex: Add goodix touch pad supportEric Lai
Add goodix touch pad as below: HWID : GXTP7288 CID : PNP0C50 I2C address : 0x2C I2C speed : 400Khz HID Descriptor Address : 0x20 BUG=b:171351666 BRANCH=octopus TEST=build image and verify goodix touch pad working. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idb4f8d3aff09712dcc98c8ae0c9ae30dc4049e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46614 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/octopus/var/fleex: Add new SKU for LTE touchAmanda Huang
New SKU ID 5 is used for LTE touch SKU. This patch does LTE power off for LTE sku and only use Wifi SAR table for non-LTE sku. BUG=b:168001586 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4 and 5. Change-Id: Ic0405d3e52aa813bbb1f350966a9e2825e595ce4 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46643 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-19mb/google/octopus/variants/ampton: Add G2Touch touchscreen supportJames Chao
BUG=b:170703029 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com> Change-Id: I2bf642963283b8a31a3bd9504c40541ca2f64b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-09mb/google/octopus: Disable Ambient Light Sensor (ALS)Karthikeyan Ramasubramanian
ALS is not stuffed in octopus boards. Hence disable ALS ACPI devices. BUG=b:169245831 BRANCH=octopus TEST=Ensure that ALS devices are disabled in ACPI tables. Change-Id: I5ad28f01b0515a41b314116eb2d05c520df0f86e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-05Fleex: Resume from suspend on critical batteryDaisuke Nojiri
This patch makes Fleex EC wake up AP from s0ix when the state of charge drops to 5%. Demonstrated as follows: 1. Boot Fleex. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 5. 4. System resumes. BUG=b:163721887 BRANCH=Octopus TEST=Verified on Fleex: Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I4a998ad0aef5a7cfc6fd18995bde5571e6127e77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-28mb/google/octopus/variants/fleex: Only do LTE power off for LTE skuEric Lai
Only do LTE power off for LTE sku in order to save extra 130ms delay for non-LTE sku. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If983185ff2f09fb1b2553c6ff1a1473d3254de4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-09-28mb/google/octopus/var/fleex: Use Wifi SAR table for non-LTE sku onlyEric Lai
Use Wifi SAR table for non-LTE sku only. BUG=b:169115341 BRANCH=octopus TEST=Check no SAR table can be loaded with sku id 4. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I086fa14a9f23e4a0fc0ef8085040219c932dbf17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45640 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-23mb/google/octopus: Set ModPhyIfValue to default value 0x12Marx Wang
0x12 will be more stable according to validation result on SD card and USB devices. BUG=b:163382089 BRANCH=none TEST=check if SD cards and USB devices work properly Signed-off-by: Marx Wang <marx.wang@intel.com> Change-Id: Ic98f27b6164daa3667009300439c61fed43a4a0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45573 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-21mb/google/octopus: Clean up LTE power off functionEric Lai
All octopus board share the same power off sequence. Move to smihandler.c instead variant.c. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I2be5a656fb42fff99c56d21aaa73ed9140caad37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45436 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/octopus/variants/fleex: Add G2Touch touchscreen supportJohn Su
BUG=b:167297664 BRANCH=octopus TEST=build fleex, and check touchscreen can work Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I910681c258ff5487830e795a8bd08c66be69b1d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44980 Reviewed-by: Justin TerAvest <teravest@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09geminilake: Factor out MAX_CPUS valueAngel Pons
Both Gemini Lake boards in the tree use the same value. Change-Id: Ib6bd05206026736fd7e3d44b49e4d8ba217c2708 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-09soc/intel/apollolake: Rename `SOC_INTEL_GLK` symbolAngel Pons
For consistency with other platforms, use `SOC_INTEL_GEMINILAKE`. Change-Id: I06310e5a9bca6c9504f19a6c2fe9b26626f290d4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
Convert 0X -> 0x Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14mb/google/octopus/variants/casta: Disable xHCI compliance modeSeunghwan Kim
Disable xHCI compliance mode to prevent SS hub detection issue. BRANCH=firmware-octopus-11297.B BUG=none TEST=built Change-Id: I7a9bbc92565e752a8f8f4689519c100594596701 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44438 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-14mb/google/octopus: Set default value of ModPhyIfValue parameterSeunghwan Kim
Set default value of ModPhyIfValue parameter in FSPS_UPD. Without this setting, it will be set to '0' and system may not detect USB 3.0 device. BUG=b:163382089 BRANCH=firmware-octopus-11297.B TEST=Built Change-Id: Ide3d1637f99dba28251102f771b6ce370cc5d8e4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
Use tabs instead of eight (sometimes less) spaces. Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID 51 - Garfour EVT (non-touch, TypeA DB) 52 - Garfour DVT (touch, HDMI DB) BUG=b:161554087 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I3cb17c2b665c303da210817a531c869c6324b249 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com>
2020-07-01mb/google/octopus/variants/dood: fix disable_xhci_lfps_pm by skuKenneth Chan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-25mb/google/octopus/variants/bobba: fix disable_xhci_lfps_pm by skuSheng-Liang Pan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I53621d7674a531adfa40e8703cb2cd01c50376b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42564 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-06mb/google/octopus/variants/garg: Add G2Touch touchscreen supportTony Huang
BUG=b:156564296 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-26apollolake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Apollo Lake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on octopus system Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-13mb/google/octopus/variants/foob: Disable xHCI compliance modeTommie
When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/octopus/variants/dood: Disable XHCI LFPS power managementKenneth Chan
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-11mb/google/octopus: Fix default FMDMatt DeVillier
On Apollo Lake/Gemini Lake platforms, FSP requires more than a simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions, FSP-m will fail on s3 resume and trigger a full reset instead. This fixes the default.fmd for octopus to match that used for reef. Test: build/boot google/ampton, verify sleep/resume works under Linux with 5.x kernel. Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-04-29mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID: 49 - Garfour EVT (touch, TypeA DB) 50 - Garfour EVT (non-touch, HDMI DB) BUG=b:152861752 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I656a2bb2404efded6da6697664748b6c8d2ca4e0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-28device: Constify struct device * parameter to write_acpi_tablesFurquan Shaikh
.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28mb/google/octopus: add default non-ChromeOS FMAPMatt DeVillier
Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since GeminiLake-based devices like Octopus cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: Iebacbea5b3a782b2abf1d6e28acd21b87dc9402b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40596 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28mb/google/octopus: Add VBT for ampton variantMatt DeVillier
Add VBT file, extracted from stock Google firmware, and select its use via Kconfig. Change-Id: I256c1c72d1d1e40ea9426fa717bfc4f9c950a91f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-14mb/google/octopus/variants/lick: Disable xHCI compliance modeJulia Tsai
Since the first LFPS timeout causes xHCI to enter compliance mode, the SS hub cannot be enumerated. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:153782196 TEST=Verified usb operation successfully. Signed-off-by: Julia Tsai <julia.tsai@lcfc.corp-partner.google.com> Change-Id: If0bf68c8cf0a2a3b857395b6b82e46cc384ba65c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39874 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-13ec/google/chromeec: add smbios_mainboard_manufacturer()Aaron Durbin
When EC_GOOGLE_CHROMEEC_SKUID is selected provide an implementation of smbios_mainboard_manufacturer() so the code doesn't need to be duplicated in the mainboards. BUG=b:153767369 Change-Id: Ib65fe373a79d606cffcba71882b0db61be5a18c3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-07mb/google/octopus/variants/phaser: Disable xHCI compliance modeTommie
Since the first LFPS timeout causes xHCI to enter compliance mode, the SS hub cannot be enumerated. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:149723583 TEST=Verified USB operation successfully. Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: I3e6ab6ec0c4865cf2467da900f13d18468ff356f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-06mb/google/octopus: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I8076155330100982de82d410b6579ac99ed89e7b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40187 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18src/mainboard/g/octopus: Enables GMM in the devicetree for octopusFranklin He
Adds GMM into the baseboard of Octopus For GLK, PCI device 3 is GMM according to Document#: 569262(Glk EDS Vol-1 rev2-7) Related to Gerrit review 39579 BUG=b:151115705 BRANCH=None TEST=Flashed final image on Chromebook Change-Id: I75b4a835c18c5eeb542b7f7b89deea45a31e47bd Signed-off-by: Franklin He <franklinh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-17mb/google/octopus: Add custom SAR values for Foob360Peichao Wang
Foob360 would prefer to use different SAR values. Since Foob360 sku id is 9. BUG=b:149362272 BRANCH=octopus TEST=build Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04src/ec,mainboard: Move weak smbios_system_sku() override inwardsEdward O'Callaghan
Internalise smbios_system_sku() strong symbol inwards in the ec_skuid.c implementation and simply wrap a call to: google_chromeec_smbios_system_sku(). BUG=b:150735116 BRANCH=none TEST=none Change-Id: I05ebfc8126c0fb176ca52c307c658f50611ab6ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39146 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04mainboard/google/octopus: Migrate onto SKU ID helpersEdward O'Callaghan
Leverage the common sku id space helper encoders and set the sku id max to 0xff for legacy to ensure we behave the same. BUG=b:149348474 BRANCH=none TEST=tested on hatch Change-Id: I60a37a5f9659b8df4018872956f95e07a3506440 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-02mb/google/octopus: support new Elan touch panel for FoobTommie
This is new elan touch screen IC, which includes touch panel and USI pen. BUG=b:149800883 BRANCH=octopus TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Ibec3d08cc740e398a10a5c845181318724afc70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-02-17mb/google/octopus/variants/dood: add two new SKU IDsKenneth Chan
add SKU ID 3 and 4 for dood DVT 1: Dood WiFi + LTE (evt) 2: Dood WiFi (evt) 3: Dood WiFi + LTE + dual camera (dvt) 4: Dood WiFi + dual camera (dvt) BUG=b:148988979 TEST=build firmware and verify on the DUT of sku 3 and 4 check LTE module is enabled or not Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17mb/google/octopus: Add custom SAR values for BipshipTony Huang
Bipship is a sustaining project of Blooguard. SAR value follow Blooguard. BUG=b:149414960 BRANCH=octopus TEST=build and verify load correct SAR value by sku-id Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-02-09mb/google/octopus/variants/lick: Increase TCC offset to 15Hash.Hung
Change tcc offset from 0 to 15 degree celsius for lick. BUG=b:147198431 BRANCH=octopus TEST=Build, and verify test result by thermal team. Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Change-Id: Ife6b02321145837e05c82f979998466b83317f86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38506 Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09mb/google/octopus: Override VBT selection for BloogTony Huang
Since most of Bloog series SKUs need to disable DRRS support. If Bloog and Unprovisioned SKUs then return vbt.bin to enable DRRS support, return vbt_blooguard.bin for other SKUs to disable DRRS support. Bipship follow blooguard to disable DRRS support. BUG=b:148892903, b:147021309 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is bipship. Change-Id: I61f12d4ddea17a05255751fde2a5ce822dd2e782 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-01-27google/octopus: Disable bootblock consoleJulius Werner
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus variants are so close to that that they only have 0.5KB left. This is blocking development of new core features, so let's disable the bootblock console to gain a couple of KB back (like we already did on RK3288). There are probably other opporunities for code size reduction here (e.g. it seems that almost half(!) of that whole bootblock size is taken up by devicetree.cb structures), but I'm not familiar enough with the platform to dig into them. Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-26mb/google/octopus/variants/dood: support LTE moduleRen Kuo
related LTE GPIOs: GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:146843935 BRANCH=octopus TEST=build and verify on the DUT with LTE Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Ief6c993ede2bb4b3effbb05cfe22b7af4fcf7faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/37931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/bobba: fix LTE power sequence and moveSheng-Liang Pan
get_board_sku to smm stage. fix Power_off section power sequence. power_off_lte_module() should run in smm stage, add variant.c in smm stage. also move get_board_sku() to mainboard_misc.c so that we can use it in smm stage and ramstage. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I287ba1cb092a95b3a9dd1f960a3b84fd85b9b221 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37649 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/octopus: Add two new sku IDs for foobTommie
Declare these sku IDs: -SKU: 1 Foob, 1-cam, no touch, no pen. -SKU: 9 Foob360, 2-cam, touch, pen. BUG=b:145837644 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Iffcbb3f6f945ea299ff687a383a82b88dcd11ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/garg: update new SKUKevin Chiu
add new SKU ID below: 19 - Garg PVT (HDMI DB, Touch) 20 - Garg PVT (2A2C DB, Touch) 38 - Garg360 EVT (2A2C DB, touch, no stylues, rear camera) BUG=b:146260545 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ic74ce14db7060f3124c1a277eb3625ce0ff0b9f0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-09mb/google/octopus: Create Foob variantPeichao Wang
This commit creates a foob variant for Octopus. The initial settings override the baseboard was copied from variant phaser. BUG=b:144890301 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ibcdda4dd0846612f5e98ab454db7144c1caf0507 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37456 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04mb/google/octopus: Create Lick variantHash.Hung
Create new variant for Lick that is copied from phaser variant. Remove unnecessary code, due to not support touchscreen and stylus. Set to default_override_table. Remove variant.c. BUG=b:145181137 BRANCH=octopus TEST=./util/abuild/abuild -p none -t google/octopus -x -a Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174 Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-25mb/google/octopus: disable fmap cache for all octopus devicesPatrick Georgi
Meep was just the first one to fail, but the others aren't any better. Change-Id: I177c50cfe7593a5b2ad770ce1ab1191d2dff93d2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37163 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-19mb/google/octopus: Disable fmap cache for meepPatrick Georgi
By removing this code, we get approximately back to where the board was before the fmap cache feature was added, which is small enough for the Chromium OS default configuration for the board to fit into the 32KB that the bootblock can use on the chipset again. Change-Id: I52c0c30a14929913ded144bf086c12938e9c2699 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-15mb/google/octopus/variants/bobba: Add SX9310 sensor to devicetreeSheng-Liang Pan
Add semtech SAR sensor. BUG=b:143449140 BRANCH=octopus TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address. Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: support LTE power sequenceSheng-Liang Pan
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24mb/google/octopus: Override VBT selection for Dorp/Vortininja/VorticonTony Huang
Add enum for Vorticon sku. Vortininja/Vorticon will load vbt_vortininja.bin Dorp will load vbt_dorp.bin BUG=b:143197918 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU-ID sets to Dorp/Vortininja/Vorticon. Change-Id: I67d7a8ab62a1838b0a0a05f532d8b067ece686d9 Cq-Depend: chrome-internal:2026287 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-22mb/google/octopus: Override VBT selection for BloogletTony Huang
Share the same vbt_blooguard.bin to disalbe DRRS support. BUG=b:143045247 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooglet. Change-Id: Ia180f265080f801a09f10ce8a8b520c47f218775 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-10-18mb/google/octopus: Create Dood variantTim Chen
This commit creates a dood variant for Octopus. The initial settings override the baseboard was copied from variant bobba. BUG=b:141960652 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: Id8852e1f04f4356fac5445f6da6d56d430c88ad0 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-18mb/google: Shrink GBB section sizeHung-Te Lin
Chrome OS firmware images have moved bitmap resources from GBB into CBFS for a long time, so the GBB should only hold firmware keys and HWID, that is usually less than 10k. ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but many recent x86 simply copy from old settings and may run out of space when we want to add more resources, for example EC RO software sync. Note, changing the GBB section (inside RO) implies RO update, so this change *must not* be cherry-picked back to old firmware branches if some devices were already shipped. BRANCH=none BUG=None TEST=make # board=darllion,hatch,kahlee,octopus,sarien Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-16mb/google/octopus: Override VBT selection for BlooguardTony Huang
Disable DRRS on Blooguard SKU - 49, 50, 51, 52 BUG=b:142632381 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check i915_drrs_status shows DRRS supported NO when SKU ID is blooguard. Cq-Depend: chrome-internal:1983227 Change-Id: I36a313fd2beacb878da7383f733e206067c1c0fb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
Update GPIO_138 and GPIO_139 setting to fix EMR function. BUG=b:141729962,b:141281846 BRANCH=octopus TEST=verify EMR function in Grob360S. Change-Id: I28cef592374fb4aeee2f3d3010cc0e237d62a2fd Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-07mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet specJohn Su
After adjustment on Grob360S I2C0 CLK: 389.9 KHz BUG=b:141729962 BRANCH=master TEST=emerge-octopus coreboot chromeos-bootimage measure by scope with Grob360S. Change-Id: I6a30257b7978cc8899a55f9fd6ffffe01cb2a851 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18mb/google/octopus/variants/garg: add LTE sku to config power sequenceKevin Chiu
Add SKU#18 to config power sequence below: GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:134854577,b:137033609 BRANCH=octopus TEST=build Change-Id: I58e07518f6daaf608684c9fa1b1c88fc592ea117 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 03:38:04 +0000