summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Expand)Author
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
2019-07-21mb/google/hatch: Remove hatch_whlPhilip Chen
2019-07-21mb/google/hatch/var/kindred: Implement variant_devtree_update()David Wu
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
2019-07-19mb/google/hatch: Fix SD card is detected as read only issueSubrata Banik
2019-07-19mb/google/helios: Add ALC1011 in device tree to enable speaker ampsSathya Prakash M R
2019-07-18mb/google/hatch/var/helios: Implement variant_memory_sku()Furquan Shaikh
2019-07-18mb/google/hatch: Add support for variant_memory_sku()Furquan Shaikh
2019-07-18mb/google/hatch: Add FP MCU to kohaku device treeShelley Chen
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
2019-07-16mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstageShelley Chen
2019-07-13mb/google/hatch: Fix trackpad configuration in overridetreeFurquan Shaikh
2019-07-11mb/google/hatch: Update AC/DC loadline valuesRizwan Qureshi
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
2019-07-07mb/google/hatch/var/kindred: Add Raydium touchscreen supportDavid Wu
2019-07-07mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics TouchpadDavid Wu
2019-07-07mb/google/hatch/variants/kindred: Enable eMMC supportDavid Wu
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
2019-06-21mb/google/hatch/variants/kindred: Update memory strap GPIOsDavid Wu
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
2019-06-19mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet specJohn Su
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
2019-06-12mb/google/hatch: Disable dynamic clock gating for cr50's GPIOSubrata Banik
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
2019-05-31mb/google/hatch: Create helios variantTim Wawrzynczak
2019-05-31mb/google/hatch: Create kindred variantPaul Fagerburg
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
2019-05-10mb/google/hatch: Fine tune Goodix touch screen timingDtrain Hsu
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
2019-04-24mb/google/hatch/var/kohaku: Skip UART0 config in FSPFurquan Shaikh
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
2019-04-13mb/google/hatch: Restore Goodix Touch ScreenEric Lai
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
2019-04-12mb/google/hatch: Skip UART0 config in FSPFurquan Shaikh
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
2019-03-22mb/google/hatch: Add overridetree to hatch variantShelley Chen
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
2019-03-22mb/google/hatch: Enable HUNG_TASK wake interruptEvan Green
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
2019-03-15mb/google/hatch: Enable TBMC deviceDtrain Hsu
2019-03-14mb/google/hatch: Define GPP_C13 as EC_SYNC_IRQPhilip Chen
2019-03-14mb/google/hatch: fix RCompResistor[0] valueShelley Chen
2019-03-14mb/google/hatch: Update DRAM IDsShelley Chen
2019-03-14mb/google/hatch: Use MEM_CH_SEL to indicate single_channel skuShelley Chen
2019-03-11mb/google/hatch: Enable audio supportSathya Prakash M R
2019-03-08mb/google/hatch: Create hatch_whl variantShelley Chen
2019-03-08mb/google/hatch: Initialize all gpiosShelley Chen
2019-02-28mb/google/hatch: Add GPIO programming for GPP_C0 to GPP_C7Maulik V Vaghela
2019-02-27mb/google/hatch: Initialize GPIO_PCH_WP early in bootRizwan Qureshi
2019-02-27mb/google/hatch: update SD card detect GPIORizwan Qureshi
2019-02-22mb/google/hatch: Enable wake from trackpadShelley Chen
2019-02-15mb/google/hatch: Enable DPTF functionalitySumeet Pawnikar
2019-02-13mb/google/hatch: Configure GPIO pad for non-inversionAamir Bohra
2019-02-08mb/google/hatch: Replace part-specific SPD files with generic onesShelley Chen
2019-02-06mb/google/hatch: Configure I2C busesFurquan Shaikh
2019-02-05mb/google/hatch: Add keyboard backlight supportIvy Jian
2019-02-05mb/google/hatch: Add USB port capability ACPI support for USB2 port10Aamir Bohra
2019-02-01mb/google/hatch: Enable S0ixShelley Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 19:58:01 +0000