summaryrefslogtreecommitdiff
path: root/src/mainboard/google/drallion/variants
AgeCommit message (Expand)Author
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
2022-01-17soc/intel/cnl: Use Kconfig to disable HECI1Subrata Banik
2021-09-10cannonlake mainboards: Set PMC as hidden in devicetreeTim Wawrzynczak
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
2021-05-20mb/google/drallion/var/drallion/hda_verb: Correct codec name in commentPaul Menzel
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
2020-11-13mb/google/drallion: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
2020-05-26cannonlake: update processor power limits configurationSumeet R Pawnikar
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-04-20mb/google/drallion: Increase Melfas touchscreen stop delay to 115msJohn Su
2020-04-06mb/google/drallion: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-11mb/google/drallion/variants/drallion: Set PCH Thermal Trip point to 77°CSumeet Pawnikar
2020-02-24gfx: Move drivers/generic/gfx to drivers/gfx/genericFurquan Shaikh
2020-02-24mb/google/drallion: Set GPP_G4 and GPP_G6 to NC pinEric Lai
2020-02-17mb/google/drallion/variants/drallion: Update thermal configuration for DPTFJohn Su
2020-02-17mb/google/drallion: Set cpu_pl2_4_cfg to baseline for DrallionJohn Su
2020-02-17mb/google/drallion: Correct USB3 OC pin configurationEric Lai
2020-02-09mb/google/drallion: Add new SPD files for drallionIan Feng
2020-02-09mb/google/drallion: Tuning WWAN power sequenceEric Lai
2020-02-05mb/google/drallion: Fine tune touch screen power sequenceEric Lai
2020-01-24mb/google/drallion: Remove fixed IccMax valuesJohn Su
2020-01-02mb/**/hda_verb.{c,h}: use denary numerals for codec IDsAngel Pons
2019-12-19mb/google/drallion: Remove Wilco 1.0 CML code from drallion codeEric Lai
2019-12-16mb/g/drallion: Remove Wilco 1.0 CML variants from drallion codeMike Wiitala
2019-12-11mb/google/drallion/variants/drallion: Update thermal configuration for DPTFJohn Su
2019-12-04mb/google/drallion/variants/drallion: Adjust all I2C CLK to meet specJohn Su
2019-12-03mb/google/drallion: Disable GPIO dynamic PM configurationSubrata Banik
2019-12-02mb/g/drallion: Enable privacy screen on Drallion variantMathew King
2019-11-27soc/intel/cannonlake: Disable USB2 PHY Power gatingSurendranath Gurivireddy
2019-11-06mb/g/drallion: Override smbios enclosure type for drallionMathew King
2019-11-06mb/g/drallion: Consolidate 360 sensor board detectionMathew King
2019-11-04mb/google/drallion: Update GPIO tableEric Lai
2019-11-04mb/google/drallion: Correct GPP_E7 as stop pinEric Lai
2019-11-04mb/google/drallion: fix GPP_E16 glitch when enter S5Eric Lai
2019-11-01mb/google/drallion: Add second touch pad supportEric Lai
2019-10-31mb/google/drallion: Turn off HDMI power when enter s0ix and S5Eric Lai
2019-10-22mb/google/drallion: Change touch enable pin default valueEric Lai
2019-10-16mb/google/drallion: Add new SPD file for drallionBora Guvendik
2019-10-08mb/google/drallion: Add detect pin for Wacom touchscreenFrank Wu
2019-10-02mb/google/drallion: Disable GBE in firmware for drallion variantsThejaswani Putta
2019-10-02mb/google/drallion: Dynamicly disable memory channelEric Lai
2019-09-30mb/google/drallion: Clean up devicetree configAamir Bohra
2019-09-30mb/google/drallion: Configure LPSS controller parametersAamir Bohra
2019-09-30mb/google/drallion: Adjust GPD3 pin terminationBora Guvendik
2019-09-30mb/google/drallion: De-assert WWAN reset signalAamir Bohra
2019-09-28mb/google/variants/drallion: Update the spd index mapAamir Bohra
2019-09-28mb/google/drallion: Set UART for console to UART controller 0Aamir Bohra
2019-09-19mb/google/drallion: add sku id base on sensor detectionEric Lai
2019-09-19mb/google/drallion: Add memory init setup for drallionThejaswani Putta
2019-09-18mb/google/drallion: Add SPD files for drallionAmanda Huang
2019-09-18mb/google/drallion: Enable 360 sensor detectionBernardo Perez Priego
2019-09-18mb/google/drallion: Update gpio config for drallionVarun Joshi
2019-09-13mb/google/drallion: Use arcada_ish.bin for arcada_cmlSelma BENSAID
2019-09-12soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usageSubrata Banik
2019-09-11mb/google/drallion: enable Elan and Melfas touch panelEric Lai
2019-09-09mb/google/drallion: modify USB settingEric Lai
2019-09-05mb/google/drallion: modify PCIE settingEric Lai
2019-09-02mb/google/drallion: add memory sku idEric Lai
2019-09-02mb/google/drallion: Enable HDA for drallion platformAamir Bohra
2019-08-30mb/google/drallion: change servo board debug to UART 0Eric Lai
2019-08-28mb/google/drallion: add dummy SPD fileEric Lai
2019-08-23mb/google/drallion: Add two variants - arcada_cml & sarien_cmlThejaswani Putta
2019-08-05mb/google/drallion: Add new mainboardThejaswani Putta
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 02:29:52 +0000