| Age | Commit message (Expand) | Author |
|---|
| 2022-10-07 | mb/google/nissa/pujjo: Change TPM I2C freqeuncy to 1 MHz | Leo Chou |
| 2022-10-07 | mb/google/nissa/var/yaviks: Config I2C frequency | Wisley Chen |
| 2022-10-06 | mb/google/brya/var/mithrax: adjust I2C5 times for TP | John Su |
| 2022-10-06 | mb/google/nissa/pujjo: Tuning eMMC DLL value for eMMC initialization error | Leo Chou |
| 2022-10-06 | mb/google/nissa/var/pujjo: Disable stylus GPIO pins based on fw_config | Leo Chou |
| 2022-10-05 | mb/google/brya/var/brya0: use RPL FSP headers | Nick Vaccaro |
| 2022-10-05 | mb/google/brya/var/brya0: add new THERMAL FW_CONFIG field | Nick Vaccaro |
| 2022-10-05 | mb/google/brya/var/skolas: sync brya0 and skolas FW_CONFIG | Nick Vaccaro |
| 2022-10-05 | mb/google/brya/variant/brya0: Add power limits for RPL SoC | Nick Vaccaro |
| 2022-10-04 | soc/intel/alderlake: Fix UFS OCP fabric timeout | Meera Ravindranath |
| 2022-10-02 | mb/google/brya/var/agah: Update NVVDD VR PGOOD GPP_E3 | Tarun Tuli |
| 2022-10-02 | mb/google/nissa/var/xivu: Add DPTF parameters for Xivu | Ian Feng |
| 2022-10-02 | mb/google/brya: Create lisbon variant | Kevin Chiu |
| 2022-09-30 | mb/google/nissa: Change TPM I2C freqeuncy to 1 MHz | Reka Norman |
| 2022-09-30 | mb/google/nissa: Disable the External 1.05v VR in S0 | V Sowmya |
| 2022-09-28 | mb/google/brya/vell: Add PS1/PS2 cutoff point | Shon Wang |
| 2022-09-28 | mb/google/nissa/var/xivu: Disable CNVi WLAN/BT | Ian Feng |
| 2022-09-27 | mb/google/brya/variant/brya0: Add two new memory parts | Nick Vaccaro |
| 2022-09-26 | mb/google/brya/var/agah: Explicitly program GPP_H13 in ramstage | Tim Wawrzynczak |
| 2022-09-26 | mb/google/brya/var/agah: Update PEXVDD enable GPIO for next board rev | Tim Wawrzynczak |
| 2022-09-26 | mb/google/brya/var/banshee: Remove privacy_gpio | Ricardo Ribalda |
| 2022-09-23 | mb/google/brask/variants/moli: update emmc_rtd3 enable gpio pin | Raihow Shi |
| 2022-09-22 | mb/google/brya/var/agah: Explictly program the dGPU's PCI IRQ | Tim Wawrzynczak |
| 2022-09-22 | mb/google/brya/acpi: Don't clear GC6 flag after GC6 entry | Tim Wawrzynczak |
| 2022-09-21 | mb/google/brya/var/crota: set tcc_offset value to 1 ℃ | Johnny Li |
| 2022-09-20 | mb/google/brya/variants/skolas: Set power limit values | Sumeet Pawnikar |
| 2022-09-20 | mb/google/brask/variants/moli: enable ddc on DDI_PORT_2 | Raihow Shi |
| 2022-09-20 | mb/google/nissa/var/xivu: Add supported new memory part | Ian Feng |
| 2022-09-19 | mb/google/brya/var/skolas: Add MIPI WFC support | AlanKY Lee |
| 2022-09-19 | mb/google/brya/var/brya4es: deprecate brya4es | Nick Vaccaro |
| 2022-09-16 | mb/google/nissa/var/nivviks: Enable nau8825 ADCOUT | Eric Lai |
| 2022-09-12 | mb/google/brya/acpi: Move dGPU power checks earlier | Tim Wawrzynczak |
| 2022-09-12 | mb/google/brya/acpi: Remove erroneous _PR0/_PR3 | Tim Wawrzynczak |
| 2022-09-12 | mb/google/brya/acpi/power: Clean up ASL code | Tim Wawrzynczak |
| 2022-09-12 | mb/google/brya/acpi: Save/restore/clear some registers over GCOFF | Tim Wawrzynczak |
| 2022-09-09 | mb/google/brya: Invoke power cycle of FPMCU on startup | Tarun Tuli |
| 2022-09-09 | mb/google/nissa: Disable the stylus GPIO pins based on fw_config | V Sowmya |
| 2022-09-09 | mb/google/brya/var/skolas4es: Configure _DSC for camera devices | Bora Guvendik |
| 2022-09-09 | mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag | Matt DeVillier |
| 2022-09-08 | mb/google/brya/var/kinox: Update the DPTF parameters and fan table | Dtrain Hsu |
| 2022-09-08 | mb/google/brya/var/kinox: Modify fan speed/duty table | Dtrain Hsu |
| 2022-09-04 | mb/google/brya/var/ghost: Delete variant | Jack Rosenthal |
| 2022-09-01 | mb/google/brya/acpi: Save/restore/clear some registers over GC6 | Tim Wawrzynczak |
| 2022-09-01 | mb/google/nissa: Mark PCIe wifi device as untrusted | Reka Norman |
| 2022-08-30 | mb/google/brya/variants/nivviks: Define DPTF policies for Nirwen | Vidya Gopalakrishnan |
| 2022-08-30 | mb/google/nissa: Configure the DPTF policies based on fw_config | V Sowmya |
| 2022-08-30 | mb/google/brya/vell: Update amp SSID | Shon Wang |
| 2022-08-30 | mb/google/nissa: Mark CNVi wifi device as untrusted | Reka Norman |
| 2022-08-29 | drivers/i2c/tpm: Remove TI50_FIRMWARE_VERSION_NOT_SUPPORTED | Reka Norman |
| 2022-08-26 | mb/google/nissa/var/pujjo: Add FW_CONFIG probe for new audio devices | Leo Chou |
| 2022-08-26 | mb/google/nissa/var/craask: Enable Cnvi BT Audio Offload feature | Tyler Wang |
| 2022-08-26 | mb/google/brask/variants/moli: Override tdp pl1 value | Raihow Shi |
| 2022-08-25 | mb/google/brya/variants/crota: fine tune WWAN power sequencing | Terry Chen |
| 2022-08-24 | mb/google/brya/var/agah: Reenable ASPM L1 substates | Tim Wawrzynczak |
| 2022-08-24 | mb/google/brya/var/agah: Update GPU GPIOs | Tim Wawrzynczak |
| 2022-08-24 | mb/google/brya/var/agah: Enable DPTF oem_variables | Tony Huang |
| 2022-08-22 | brya: add new skolas variant | Nick Vaccaro |
| 2022-08-21 | mb/google/brask/variants/moli: Support DPTF oem_variables | Raihow Shi |
| 2022-08-21 | mb/google/nissa/var/pujjo: Add FW_CONFIG probe for Pujjoteen disable | Leo Chou |
| 2022-08-21 | mb/google/nissa/var/yaviks: Update GPIO setting | Wisley Chen |
| 2022-08-21 | mb/google/nissa/var/yaviks: Update devicetree setting | Wisley Chen |
| 2022-08-19 | mb/google/nissa/var/pujjo: Add DPTF setting for pujjo | Leo Chou |
| 2022-08-19 | mb/google/nissa: Skip sending the MBP HOB to save boot time | V Sowmya |
| 2022-08-19 | mb/google/nissa: Remove runtime descriptor updates and VBT selection | Sam McNally |
| 2022-08-18 | mb/google/brya/var/crota: update DPTF setting in Crota | Johnny Li |
| 2022-08-18 | mb/google/brya/acpi: Add PCIe SRCCLK# control to RTD3 methods | Tim Wawrzynczak |
| 2022-08-18 | mb/google/brya/var/agah: Update NVVDD VR PGOOD GPIO | Tim Wawrzynczak |
| 2022-08-18 | mb/google/brya/var/pujjo: Modify GPIO for SD_WAKE_N | Leo Chou |
| 2022-08-17 | mb/google/nissa: Simplify LTE GPIO config using pad-based overrides | Reka Norman |
| 2022-08-17 | mb/google/nissa/var/yaviks: Generate SPD ID for supported memory parts | Wisley Chen |
| 2022-08-17 | mb/google/nissa: Create yaviks variant | Wisley Chen |
| 2022-08-17 | mb/google/brya/var/ghost: Enable NXP UWB SR150 chip | Jack Rosenthal |
| 2022-08-17 | mb/google/nissa/var/pujjo: Configure EE noise mitigation for pujjo | Leo Chou |
| 2022-08-17 | mb/google/nissa/var/pujjo: Add FW_CONFIG probe for supported devices | Stanley Wu |
| 2022-08-17 | mb/google/brya/var/ghost: Add max98396 support | Eric Lai |
| 2022-08-17 | mb/google/brask/variants/moli: use specific gpio table by board_ver | Raihow Shi |
| 2022-08-16 | mb/google/brya/acpi: Add minimum off timer for GCOFF | Tim Wawrzynczak |
| 2022-08-16 | mb/google/brya/acpi: Fix GC6 entry and exit sequences | Tim Wawrzynczak |
| 2022-08-16 | mb/google/brya/var/agah: Move VW GPIO programming to bootblock | Cliff Huang |
| 2022-08-16 | mb/**/dsdt.asl: Drop misleading "OEM revision" comment | Angel Pons |
| 2022-08-16 | mb/**/dsdt.asl: Drop superfluous comments | Angel Pons |
| 2022-08-14 | mb/google/brya/var/ghost: Enable camera | Jack Rosenthal |
| 2022-08-13 | mb/google/brya: Use default EPP of 50% for skolas | Jeremy Compostella |
| 2022-08-13 | Revert "mb/google/brya: Set EPP to 45% for all Brya variants" | Jeremy Compostella |
| 2022-08-13 | mb/google/brya/var/taniks: Disable PCH USB2 phy power gating for taniks | Joey Peng |
| 2022-08-13 | mb/google/brask/variants/moli: modify psys_pl2 for 15W and 28W SOC | Raihow Shi |
| 2022-08-12 | mb/google/brya/var/taeko: Disable PCH USB2 phy power gating for taeko | Joey Peng |
| 2022-08-12 | mb/google/brya/var/mithrax: Add new memory H9HCNNNCPMMLXR-NEE | John Su |
| 2022-08-12 | mb/google/nissa/var/craask: Enable DDR RFIM Policy for Craask | Tyler Wang |
| 2022-08-10 | mb/google/nissa/var/joxer: Add WiFi SAR table | Mark Hsieh |
| 2022-08-09 | mb/google/nissa/var/pujjo: Enable USB3.0 port 3 for WWAN | Stanley Wu |
| 2022-08-09 | mb/google/brya/var/ghost: update arbitrage gpio.c header | Kevin Chowski |
| 2022-08-08 | mb/google/brya: Select SOC_INTEL_COMMON_UFS_SUPPORT for Nissa | Meera Ravindranath |
| 2022-08-07 | mb/google/brya/var/ghost: Pull EN_PP3300_TCHSCR high | Jack Rosenthal |
| 2022-08-07 | mb/google/brya/variants/agah: update dptf setting | Tony Huang |
| 2022-08-07 | mb/google/brya/acpi: Fix PERST# handling in GC6 exit | Tim Wawrzynczak |
| 2022-08-07 | mb/google/brya/var/ghost: Disable LID_SHUTDOWN | Caveh Jalali |
| 2022-08-07 | mb/google/brya/acpi: Fix NVJT subfunction IDs | Tim Wawrzynczak |
| 2022-08-05 | mb/google/brya/var/vell: Set GPP_B2 NC for RGB keybaord | Robert Chen |
| 2022-08-03 | mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9755 for kuldax | David Wu |
