Age | Commit message (Expand) | Author |
2022-04-27 | mb/google/nissa/var/craask Add device settings | Tyler Wang |
2022-04-27 | mb/google/brya/var/craask: Add GPIO table | Tyler Wang |
2022-04-27 | mb/google/brya/var/craask: Generate SPD ID for supported memory part | Tyler Wang |
2022-04-27 | soc/intel/adl/chip.h: Rename max_dram_speed to include units | Scott Chao |
2022-04-27 | mb/google/brya/var/crota: update gpio configuration | Scott Chao |
2022-04-27 | mb/google/brya/var/crota: enable boot from SSD/ eMMC | Scott Chao |
2022-04-27 | mb/google/brya/var/crota: Limit dram speed to 4800 MT/s | Scott Chao |
2022-04-27 | mb/google/brya/var/crota: modify DQ/ DQS table | Scott Chao |
2022-04-27 | mb/google/brya/var/vell: Fix camera LED flicker problem | Shon Wang |
2022-04-24 | mb/google/brya: Create mithrax variant | John Su |
2022-04-24 | tpm: Allow separate handling of Google Ti50 TPM | Jes Klinke |
2022-04-22 | mb/google/brya/var/taniks: Configure Acoustic noise mitigation | leo.chou |
2022-04-22 | mb/google/brya/var/taniks: Add WiFi SAR table for taniks | leo.chou |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-04-21 | mb/google/brask/variants/moli: update overridetree | Raihow Shi |
2022-04-21 | mb/google/brya/var/taeko: Add WIFI SAR support for tarlo | Joey Peng |
2022-04-21 | mb/google/brya/var/osiris: Generate SPD ID for supported parts | David Wu |
2022-04-21 | mb/google/brya: Create osiris variant | David Wu |
2022-04-20 | mb/google/brya/var/vell: increase RFI Spread Spectrum to 6% | Robert Chen |
2022-04-20 | mb/google/brya/var/brya0: configure gpio for headset | Amanda Huang |
2022-04-20 | mb/google/brya/var/brya0: Swap TPM and touchscreen I2C bus | Amanda Huang |
2022-04-20 | ChromeEC boards: Drop `IGNORE_IASL_MISSING_DEPENDENCY` | Angel Pons |
2022-04-20 | mb/google/brya/var/redrix: Add alias back to RP6 WWAN device | Tim Wawrzynczak |
2022-04-20 | mb/google/brya/var/anahera{4es}: Enable power saving for Smart Card | Wisley Chen |
2022-04-19 | mb/google/brya: Disable PCH USB2 phy power gating for felwinter | Sridhar Siricilla |
2022-04-19 | mb/google/brask/variants/moli: update type-c setting in overridetree | Raihow Shi |
2022-04-19 | mb/google/brask/variants/moli: add delay time to rtd3-cold | Raihow Shi |
2022-04-19 | mb/google/brask/variants/moli: remove i2c1 in overridetree | Raihow Shi |
2022-04-19 | mb/google/brask: fix boot beep | Dtrain Hsu |
2022-04-19 | mb/google/brask/variants/moli: Pick VBT based on FW_CONFIG | Raihow Shi |
2022-04-19 | mb/google/brya/var/anahera{4es}: select DRIVERS_GENESYSLOGIC_GL9750 | Wisley Chen |
2022-04-19 | mb/google/nissa: Add gpio lock pins | Eric Lai |
2022-04-19 | mb/google/brya: Add Kconfig for TPM I2C bus | Raihow Shi |
2022-04-19 | mb/google/brya/var/crota: Kconfig: Select TPM I2C bus driver | Terry Chen |
2022-04-14 | mb/google/brya/var/kano: Configure Acoustic noise mitigation | David Wu |
2022-04-14 | mb/google/brya: Add variant_init and variant_finalize callbacks | Tim Wawrzynczak |
2022-04-13 | mb/google/brya/baseboard/nissa: Configure I2C lcnt and hcnt | Reka Norman |
2022-04-13 | mb/google/brya: Create craask variant | Tyler Wang |
2022-04-13 | mb/google/brya: Add missing parameter name to variant_generate_s0ix_hook | Reka Norman |
2022-04-13 | mb/google/brya/var/nereid: Enable OZ711LV2LN SD card controller | Reka Norman |
2022-04-13 | mb/google/brya/var/brya0: Change MAX98360 AMP interface to I2S1 | Amanda Huang |
2022-04-12 | mb/google/brya/var/vell: add WWAN power sequence setting for vell | Robert Chen |
2022-04-07 | mb/google/brya/var/taniks: Enable Genesys L1 max entry delay | Joey Peng |
2022-04-07 | ChromeOS: Add DECLARE_x_CROS_GPIOS() | Kyösti Mälkki |
2022-04-07 | mb/google/brya/var/nereid: Add WLAN power sequence | Reka Norman |
2022-04-07 | mb/google/brya/var/nereid: Enable pen garage | Reka Norman |
2022-04-07 | mb/google/brya/var/nereid: Configure descriptor for either Type-C or HDMI | Reka Norman |
2022-04-06 | ChromeOS: Promote variant_cros_gpio() | Kyösti Mälkki |
2022-04-06 | mb/google/brya: Enable dynamic debug capability for brya family | Sridhar Siricilla |
2022-04-04 | mb/google/brya/var/vell: Tune I2C1/I2C7 bus speed for 1 MHz | Eddy Lu |
2022-04-01 | mb/google/brya/var/nereid: Add separate VBT for HDMI | Reka Norman |
2022-04-01 | mb/google/brya/var/nereid: Disable C1 PMC mux conn for HDMI | Reka Norman |
2022-04-01 | mb/google/brya/variants/baseboard/brask: Turn off NFC power in S0ix | Alan Huang |
2022-04-01 | mb/google/brya/var/primus{4es}: Decrease touchscreen T3 timing to 200ms | Casper Chang |
2022-04-01 | mb/google/brya/var/nereid: Enable AUX DC biasing on C0 and C1 | Reka Norman |
2022-03-31 | mb/google/brya/var/agah: Replace amp max98390 with max98360 | Tony Huang |
2022-03-31 | mb/google/brya/var/agah: Add GL9750 SD card reader support | Tony Huang |
2022-03-31 | mb/google/brya/var/kinox: set GPP_D0 to NC | Dtrain Hsu |
2022-03-30 | mb/google/brya/var/kano: Remove SAR sensor | David Wu |
2022-03-30 | mb/google/brya/variants/crota: Add memory config for crota | Terry Chen |
2022-03-30 | Revert "mb/google/brya/var/kano: adjust I2C3 speed" | David Wu |
2022-03-30 | mb/google/brya/variants/crota: init overridetree for crota | Terry Chen |
2022-03-30 | mb/google/brya/var/banshee: Update the GPP_D12 as USB_C3_LSX_RX | Frank Wu |
2022-03-30 | mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL for tarlo | Joey Peng |
2022-03-30 | mb/google/nissa/var/nivviks: Move WWAN power on sequence forward | Eric Lai |
2022-03-30 | mb/google/brask/variants/moli: update GPIOs for moli | Raihow Shi |
2022-03-30 | mb/google/brya/var/agah: Fix GPU GPIOs | Tim Wawrzynczak |
2022-03-29 | mb/google/brya/var/felwinter: Update GPP_E19 from NF to NC | John Su |
2022-03-27 | mb/google/brya/var/banshee: Add mic mute switch setting | Frank Wu |
2022-03-27 | mb/google/brya/variants/baseboard/brask: set GPP_D0 to GPO | Zhuohao Lee |
2022-03-27 | mb/google/brya/var/brya0: Replace amp max98357 with max98360 | Amanda Huang |
2022-03-25 | mb/google/brya: Adjust FMD file to chromeos.fmd for kano | David Wu |
2022-03-25 | drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15 | Eric Lai |
2022-03-24 | mb/google/brya/var/gimble: Include 4 new SPDs | Mark Hsieh |
2022-03-23 | mb/google/brya/var/taniks: Increase TSR2 threshold from 40 °C to 70 °C | Joey Peng |
2022-03-23 | mb/google/brya/var/primus{4es}: add delay time to rtd3-cold | Terry Chen |
2022-03-22 | mb/google/brya/var/moli: Fix overridetree | Tim Wawrzynczak |
2022-03-22 | mb/google/brask/variants/moli: init overridetree for moli | Raihow Shi |
2022-03-22 | mb/google/brya/variants/crota: set up gpio | Terry Chen |
2022-03-22 | mb/google/brya/var/kinox: Modify DDR4 to non-interleaved | Dtrain Hsu |
2022-03-22 | mb/google/brya/var/taeko: Disable GL9763e PCIE port L0s | Kevin Chang |
2022-03-22 | mb/google/brya/var/taeko: Enable Genesys L1 max entry delay | Kevin Chang |
2022-03-21 | mb/google/brya/var/banshee: Add WiFi SAR table | Frank Wu |
2022-03-21 | mb/google/brya/vell: Move WWAN devices for vell | Robert Chen |
2022-03-21 | mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR | Sridhar Siricilla |
2022-03-18 | mb/google/brya/nivviks/overridetree: update tcss_aux_ori register name | Felix Held |
2022-03-18 | mb/google/nissa/var/nivviks: Add TcssAuxori for nivviks | Usha P |
2022-03-18 | mb/google/brya/var/banshee: Replace amp max98357 with max98360 | Frank Wu |
2022-03-18 | mb/google/brya/var/volmar: Disable thunderbolt | Ren Kuo |
2022-03-18 | mb/google/brya/var/kinox: Reconfigure GPIO settings | Dtrain Hsu |
2022-03-18 | mb/google/brya/var/vell: Change AMP driver setting | Shon Wang |
2022-03-17 | mb/google/brya: Remove mainboard.asl | Eric Lai |
2022-03-17 | mb/google/brya: Remove Pcie Generic driver for WWAN | Cliff Huang |
2022-03-17 | mb/google/brya/var/banshee: Update DPTF parameters | Frank Wu |
2022-03-17 | mb/google/brya/var/kinox: Modify 15W SOC power control setting | Dtrain Hsu |
2022-03-17 | mb/google/brask/variants/moli: set eMMC pin in bootblock | Raihow Shi |
2022-03-17 | mb/google/nissa/var/nivviks: Set gpio override to board_0 | Eric Lai |
2022-03-16 | mb/google/brya/var/kinox: Enable PCIe-eMMC bridge | Dtrain Hsu |
2022-03-16 | mb/google/brya/var/kinox: Modify the DPTF/Fan parameters | Dtrain Hsu |
2022-03-16 | mb/google/brya: set GPP_D0 to GPO | Mark Hsieh |