summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya
AgeCommit message (Expand)Author
2022-11-17mb/google/nissa/var/pujjo: Tune timing on SD device RTD3Leo Chou
2022-11-17mb/google/nissa/var/xivu: Add fw_config probe for ALC5682-VS/ALC5682-VDIan Feng
2022-11-16mb/google/nissa/var/yaviks: Enable ISH driver and firmware nameWisley Chen
2022-11-16mb/google/brya/var/agah: Add Power Limits for RPL SKUTarun Tuli
2022-11-16mb/google/brya/variants/volmar: Update ELAN touchscreen timingRen Kuo
2022-11-16mb/google/nissa/var/craask: Correct G2 touchscreen HIDTyler Wang
2022-11-16mb/google/brya/var/agah: Set GPP_H13 to reset on PLTRSTTarun Tuli
2022-11-16mb/google/brya/var/gaelin: Configure DRIVER_TPM_I2C_BUSRaymond Chung
2022-11-15mb/google/nissa: Add SD_BOOT fw_configReka Norman
2022-11-15mb/google/nissa: Remove SI_ME subregionsReka Norman
2022-11-15mb/google/brya/var/marasov: Add memory config for marasovFrank Chu
2022-11-15mb/google/brya/var/marasov: use i2c1 for TPM for marasovFrank Chu
2022-11-15mb/google/nissa/var/craask: Remove RFIM settings for CraaskTyler Wang
2022-11-14mb/google/nissa/var/pujjo: Modify touch screen hid to ELAN901CLeo Chou
2022-11-12mb/google/brya/var/agah: Add RPL Support to AgahTarun Tuli
2022-11-12mb/google/brya/variants/volmar: Disable the unused FP padsRen Kuo
2022-11-12mb/google/brya/var/marasov: Enable ISH driver and firmware nameSubrata Banik
2022-11-12mb/google/brya/var/marasov: Select ISH driverSubrata Banik
2022-11-12mb/google/brya/var/gladios: Add GL9750 SD card reader supportKevin Chiu
2022-11-12mb/google/brya/var/gladios: Include GL9763E driver for eMMC supportKevin Chiu
2022-11-11mb/google/brya/var/gladios: use i2c1 for TPM supportKevin Chiu
2022-11-10mb/google/brya/var/marasov: use RPL FSP headersFrank Chu
2022-11-10mb/google/brya/var/marasov: Generate SPD ID for supported memory partsFrank Chu
2022-11-10mb/google/brya/var/marasov: Update devicetree setting for marasovFrank Chu
2022-11-10mb/google/nissa/var/craask: Disable stylus GPIO pins based on fw_configTyler Wang
2022-11-10mb/google/nissa/var/craask: Modify DPTF related settingsTyler Wang
2022-11-10mb/google/nissa/var/pujjo: Update register parameters for SX9324 tunningVictor Ding
2022-11-09mb/google/nissa/var/craask: Add wifi sar tableTyler Wang
2022-11-09mb/google/nissa/var/xivu: Add Hynix new memory supportIan Feng
2022-11-09drivers/i2c/sx9324: Add support for Linux's SX9324 driverVictor Ding
2022-11-08mb/google/brask: Disable PCH USB2 phy power gating for braskRicky Chang
2022-11-08mb/google/nissa/var/craask: Add ambient thermal sensor settingsTyler Wang
2022-11-08mb/google/brya/var/kano: Add mipi hi556 camera supportDavid Wu
2022-11-08mb/google/brya/var/kinox: Disable PCH USB2 phy power gatingDtrain Hsu
2022-11-08mb/google/brya/var/lisbon: Disable thunderbolt portsKevin Chiu
2022-11-07mb/google/brya : Set EPP value for Vell boardSridhar Siricilla
2022-11-07mb/google: Probe p-sensor only for selected variantsVictor Ding
2022-11-07mb/google/brya: Create marasov variantFrank Chu
2022-11-07mb/google/brya/variants/volmar: Add firmware config field for FPMCURen Kuo
2022-11-05mb/google/brask: Disable PCH USB2 phy power gating for moliCasper Chang
2022-11-04mb/google/brask/var/kuldax: Update PsysPL2 and PsysPmaxDavid Wu
2022-11-04mb/google/brya/var/lisbon: update USB topology in devicetreeKevin Chiu
2022-11-03mb/google/brya/gaelin: Configure GPIO settingsRaymond Chung
2022-11-02mb/google/brya/var/lisbon: Enable SaGvKevin Chiu
2022-11-02mb/google/brya/var/lisbon: Include driver for GL9763E for eMMC boot diskKevin Chiu
2022-11-02mb/google/brya: enable PCIe RP12 for lisbon eMMC supportKevin Chiu
2022-11-02mb/google/brya/var/gladios: use RPL FSP headersKevin Chiu
2022-11-01mb/google/brask/variants/moli: remove fan settingRaihow Shi
2022-10-29mb/google/brya/var/skolas: Adjust I2C3 CLK to meet 400 kHzAlanKY Lee
2022-10-28mb/google/brask/variants/moli: keep SAGV disableRaihow Shi
2022-10-27mb/google/brya: Update Crota's ELAN touchscreen delay to 150 msPaz Zcharya
2022-10-27mb/google/brya/var/lisbon: use i2c1 for TPM for lisbonKevin Chiu
2022-10-27mb/google/brya: Update devicetree setting for lisbonKevin Chiu
2022-10-27mb/google/brask/var/lisbon: Update gpio tableKevin Chiu
2022-10-27mb/google/brya/gaelin: Change DDR4 from interleave to non-interleaveRaymond Chung
2022-10-26mb/google/brya/var/kano: select SOC_INTEL_RAPTORLAKEDavid Wu
2022-10-22mb/google/brask/var/kuldax: Revise PsysPL2 to 150W for Pentium CPUDavid Wu
2022-10-22mb/google/brya: Enable SaGv for brask variantsDerek Huang
2022-10-22mb/google/nissa: Disable SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRYReka Norman
2022-10-20mb/google/brya: Create gladios ADL variantKevin Chiu
2022-10-20mb/google/nissa/var/craask: Remove redundant ELAN TouchscreenTyler Wang
2022-10-20mb/google/nissa/var/craask: Remove SAR Proximity SensorVictor Ding
2022-10-20mb/google/nissa/var/nivviks: Change ISH name to adl_ish_lite.binReka Norman
2022-10-19mb/google/brask/var/kuldax: Set PL and PsysPLDavid Wu
2022-10-18mainboard/google: Remove ACPI ALS deviceGwendal Grignou
2022-10-17mb/google/brya: Guard FMD selection with CHROMEOSMatt DeVillier
2022-10-14mb/google/nissa/var/yaviks: Remove fw_config probe for storage devicesReka Norman
2022-10-14mb/google/nissa/var/xivu: Config I2C frequencyIan Feng
2022-10-13mb/google/brya/var/felwinter: adjust I2C5 times for TPJohn Su
2022-10-11mb/google/brya/nivviks: Enable ISH driver and firmware nameMeera Ravindranath
2022-10-10brya: add new zydron variantDavid Wu
2022-10-08mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9750 for lisbonKevin Chiu
2022-10-07mb/google/nissa/pujjo: Change TPM I2C freqeuncy to 1 MHzLeo Chou
2022-10-07mb/google/nissa/var/yaviks: Config I2C frequencyWisley Chen
2022-10-06mb/google/brya/var/mithrax: adjust I2C5 times for TPJohn Su
2022-10-06mb/google/nissa/pujjo: Tuning eMMC DLL value for eMMC initialization errorLeo Chou
2022-10-06mb/google/nissa/var/pujjo: Disable stylus GPIO pins based on fw_configLeo Chou
2022-10-05mb/google/brya/var/brya0: use RPL FSP headersNick Vaccaro
2022-10-05mb/google/brya/var/brya0: add new THERMAL FW_CONFIG fieldNick Vaccaro
2022-10-05mb/google/brya/var/skolas: sync brya0 and skolas FW_CONFIGNick Vaccaro
2022-10-05mb/google/brya/variant/brya0: Add power limits for RPL SoCNick Vaccaro
2022-10-04soc/intel/alderlake: Fix UFS OCP fabric timeoutMeera Ravindranath
2022-10-02mb/google/brya/var/agah: Update NVVDD VR PGOOD GPP_E3Tarun Tuli
2022-10-02mb/google/nissa/var/xivu: Add DPTF parameters for XivuIan Feng
2022-10-02mb/google/brya: Create lisbon variantKevin Chiu
2022-09-30mb/google/nissa: Change TPM I2C freqeuncy to 1 MHzReka Norman
2022-09-30mb/google/nissa: Disable the External 1.05v VR in S0V Sowmya
2022-09-28mb/google/brya/vell: Add PS1/PS2 cutoff pointShon Wang
2022-09-28mb/google/nissa/var/xivu: Disable CNVi WLAN/BTIan Feng
2022-09-27mb/google/brya/variant/brya0: Add two new memory partsNick Vaccaro
2022-09-26mb/google/brya/var/agah: Explicitly program GPP_H13 in ramstageTim Wawrzynczak
2022-09-26mb/google/brya/var/agah: Update PEXVDD enable GPIO for next board revTim Wawrzynczak
2022-09-26mb/google/brya/var/banshee: Remove privacy_gpioRicardo Ribalda
2022-09-23mb/google/brask/variants/moli: update emmc_rtd3 enable gpio pinRaihow Shi
2022-09-22mb/google/brya/var/agah: Explictly program the dGPU's PCI IRQTim Wawrzynczak
2022-09-22mb/google/brya/acpi: Don't clear GC6 flag after GC6 entryTim Wawrzynczak
2022-09-21mb/google/brya/var/crota: set tcc_offset value to 1 ℃Johnny Li
2022-09-20mb/google/brya/variants/skolas: Set power limit valuesSumeet Pawnikar
2022-09-20mb/google/brask/variants/moli: enable ddc on DDI_PORT_2Raihow Shi
2022-09-20mb/google/nissa/var/xivu: Add supported new memory partIan Feng