summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya
AgeCommit message (Expand)Author
2022-04-27mb/google/brya/var/vell: Enable TBT PCIe root port 3Gaggery Tsai
2022-04-27mb/google/nissa/var/craask Add device settingsTyler Wang
2022-04-27mb/google/brya/var/craask: Add GPIO tableTyler Wang
2022-04-27mb/google/brya/var/craask: Generate SPD ID for supported memory partTyler Wang
2022-04-27soc/intel/adl/chip.h: Rename max_dram_speed to include unitsScott Chao
2022-04-27mb/google/brya/var/crota: update gpio configurationScott Chao
2022-04-27mb/google/brya/var/crota: enable boot from SSD/ eMMCScott Chao
2022-04-27mb/google/brya/var/crota: Limit dram speed to 4800 MT/sScott Chao
2022-04-27mb/google/brya/var/crota: modify DQ/ DQS tableScott Chao
2022-04-27mb/google/brya/var/vell: Fix camera LED flicker problemShon Wang
2022-04-24mb/google/brya: Create mithrax variantJohn Su
2022-04-24tpm: Allow separate handling of Google Ti50 TPMJes Klinke
2022-04-22mb/google/brya/var/taniks: Configure Acoustic noise mitigationleo.chou
2022-04-22mb/google/brya/var/taniks: Add WiFi SAR table for taniksleo.chou
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
2022-04-21mb/google/brask/variants/moli: update overridetreeRaihow Shi
2022-04-21mb/google/brya/var/taeko: Add WIFI SAR support for tarloJoey Peng
2022-04-21mb/google/brya/var/osiris: Generate SPD ID for supported partsDavid Wu
2022-04-21mb/google/brya: Create osiris variantDavid Wu
2022-04-20mb/google/brya/var/vell: increase RFI Spread Spectrum to 6%Robert Chen
2022-04-20mb/google/brya/var/brya0: configure gpio for headsetAmanda Huang
2022-04-20mb/google/brya/var/brya0: Swap TPM and touchscreen I2C busAmanda Huang
2022-04-20ChromeEC boards: Drop `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
2022-04-20mb/google/brya/var/redrix: Add alias back to RP6 WWAN deviceTim Wawrzynczak
2022-04-20mb/google/brya/var/anahera{4es}: Enable power saving for Smart CardWisley Chen
2022-04-19mb/google/brya: Disable PCH USB2 phy power gating for felwinterSridhar Siricilla
2022-04-19mb/google/brask/variants/moli: update type-c setting in overridetreeRaihow Shi
2022-04-19mb/google/brask/variants/moli: add delay time to rtd3-coldRaihow Shi
2022-04-19mb/google/brask/variants/moli: remove i2c1 in overridetreeRaihow Shi
2022-04-19mb/google/brask: fix boot beepDtrain Hsu
2022-04-19mb/google/brask/variants/moli: Pick VBT based on FW_CONFIGRaihow Shi
2022-04-19mb/google/brya/var/anahera{4es}: select DRIVERS_GENESYSLOGIC_GL9750Wisley Chen
2022-04-19mb/google/nissa: Add gpio lock pinsEric Lai
2022-04-19mb/google/brya: Add Kconfig for TPM I2C busRaihow Shi
2022-04-19mb/google/brya/var/crota: Kconfig: Select TPM I2C bus driverTerry Chen
2022-04-14mb/google/brya/var/kano: Configure Acoustic noise mitigationDavid Wu
2022-04-14mb/google/brya: Add variant_init and variant_finalize callbacksTim Wawrzynczak
2022-04-13mb/google/brya/baseboard/nissa: Configure I2C lcnt and hcntReka Norman
2022-04-13mb/google/brya: Create craask variantTyler Wang
2022-04-13mb/google/brya: Add missing parameter name to variant_generate_s0ix_hookReka Norman
2022-04-13mb/google/brya/var/nereid: Enable OZ711LV2LN SD card controllerReka Norman
2022-04-13mb/google/brya/var/brya0: Change MAX98360 AMP interface to I2S1Amanda Huang
2022-04-12mb/google/brya/var/vell: add WWAN power sequence setting for vellRobert Chen
2022-04-07mb/google/brya/var/taniks: Enable Genesys L1 max entry delayJoey Peng
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
2022-04-07mb/google/brya/var/nereid: Add WLAN power sequenceReka Norman
2022-04-07mb/google/brya/var/nereid: Enable pen garageReka Norman
2022-04-07mb/google/brya/var/nereid: Configure descriptor for either Type-C or HDMIReka Norman
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
2022-04-06mb/google/brya: Enable dynamic debug capability for brya familySridhar Siricilla
2022-04-04mb/google/brya/var/vell: Tune I2C1/I2C7 bus speed for 1 MHzEddy Lu
2022-04-01mb/google/brya/var/nereid: Add separate VBT for HDMIReka Norman
2022-04-01mb/google/brya/var/nereid: Disable C1 PMC mux conn for HDMIReka Norman
2022-04-01mb/google/brya/variants/baseboard/brask: Turn off NFC power in S0ixAlan Huang
2022-04-01mb/google/brya/var/primus{4es}: Decrease touchscreen T3 timing to 200msCasper Chang
2022-04-01mb/google/brya/var/nereid: Enable AUX DC biasing on C0 and C1Reka Norman
2022-03-31mb/google/brya/var/agah: Replace amp max98390 with max98360Tony Huang
2022-03-31mb/google/brya/var/agah: Add GL9750 SD card reader supportTony Huang
2022-03-31mb/google/brya/var/kinox: set GPP_D0 to NCDtrain Hsu
2022-03-30mb/google/brya/var/kano: Remove SAR sensorDavid Wu
2022-03-30mb/google/brya/variants/crota: Add memory config for crotaTerry Chen
2022-03-30Revert "mb/google/brya/var/kano: adjust I2C3 speed"David Wu
2022-03-30mb/google/brya/variants/crota: init overridetree for crotaTerry Chen
2022-03-30mb/google/brya/var/banshee: Update the GPP_D12 as USB_C3_LSX_RXFrank Wu
2022-03-30mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL for tarloJoey Peng
2022-03-30mb/google/nissa/var/nivviks: Move WWAN power on sequence forwardEric Lai
2022-03-30mb/google/brask/variants/moli: update GPIOs for moliRaihow Shi
2022-03-30mb/google/brya/var/agah: Fix GPU GPIOsTim Wawrzynczak
2022-03-29mb/google/brya/var/felwinter: Update GPP_E19 from NF to NCJohn Su
2022-03-27mb/google/brya/var/banshee: Add mic mute switch settingFrank Wu
2022-03-27mb/google/brya/variants/baseboard/brask: set GPP_D0 to GPOZhuohao Lee
2022-03-27mb/google/brya/var/brya0: Replace amp max98357 with max98360Amanda Huang
2022-03-25mb/google/brya: Adjust FMD file to chromeos.fmd for kanoDavid Wu
2022-03-25drivers/i2c/tpm: Work around missing board_cfg in Ti50 FW under 0.15Eric Lai
2022-03-24mb/google/brya/var/gimble: Include 4 new SPDsMark Hsieh
2022-03-23mb/google/brya/var/taniks: Increase TSR2 threshold from 40 °C to 70 °CJoey Peng
2022-03-23mb/google/brya/var/primus{4es}: add delay time to rtd3-coldTerry Chen
2022-03-22mb/google/brya/var/moli: Fix overridetreeTim Wawrzynczak
2022-03-22mb/google/brask/variants/moli: init overridetree for moliRaihow Shi
2022-03-22mb/google/brya/variants/crota: set up gpioTerry Chen
2022-03-22mb/google/brya/var/kinox: Modify DDR4 to non-interleavedDtrain Hsu
2022-03-22mb/google/brya/var/taeko: Disable GL9763e PCIE port L0sKevin Chang
2022-03-22mb/google/brya/var/taeko: Enable Genesys L1 max entry delayKevin Chang
2022-03-21mb/google/brya/var/banshee: Add WiFi SAR tableFrank Wu
2022-03-21mb/google/brya/vell: Move WWAN devices for vellRobert Chen
2022-03-21mb/google/brya: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTORSridhar Siricilla
2022-03-18mb/google/brya/nivviks/overridetree: update tcss_aux_ori register nameFelix Held
2022-03-18mb/google/nissa/var/nivviks: Add TcssAuxori for nivviksUsha P
2022-03-18mb/google/brya/var/banshee: Replace amp max98357 with max98360Frank Wu
2022-03-18mb/google/brya/var/volmar: Disable thunderboltRen Kuo
2022-03-18mb/google/brya/var/kinox: Reconfigure GPIO settingsDtrain Hsu
2022-03-18mb/google/brya/var/vell: Change AMP driver settingShon Wang
2022-03-17mb/google/brya: Remove mainboard.aslEric Lai
2022-03-17mb/google/brya: Remove Pcie Generic driver for WWANCliff Huang
2022-03-17mb/google/brya/var/banshee: Update DPTF parametersFrank Wu
2022-03-17mb/google/brya/var/kinox: Modify 15W SOC power control settingDtrain Hsu
2022-03-17mb/google/brask/variants/moli: set eMMC pin in bootblockRaihow Shi
2022-03-17mb/google/nissa/var/nivviks: Set gpio override to board_0Eric Lai
2022-03-16mb/google/brya/var/kinox: Enable PCIe-eMMC bridgeDtrain Hsu
2022-03-16mb/google/brya/var/kinox: Modify the DPTF/Fan parametersDtrain Hsu
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 19:26:54 +0000