summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants/kano
AgeCommit message (Expand)Author
2022-12-05mb/google/brya: Set power limit values for kano and zydronDavid Wu
2022-11-08mb/google/brya/var/kano: Add mipi hi556 camera supportDavid Wu
2022-09-09mb/google/brya: Invoke power cycle of FPMCU on startupTarun Tuli
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
2022-07-04mb/google/brya/var/kano: Disable PCH USB2 phy power gatingDavid Wu
2022-05-28mb/google/brya/var/kano: Correct _PLD valuesWon Chung
2022-04-14mb/google/brya/var/kano: Configure Acoustic noise mitigationDavid Wu
2022-03-30mb/google/brya/var/kano: Remove SAR sensorDavid Wu
2022-03-30Revert "mb/google/brya/var/kano: adjust I2C3 speed"David Wu
2022-03-15soc/intel/adl/chip.h: Convert all camel case variables to snake caseMAULIK V VAGHELA
2022-03-09mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUsDavid Wu
2022-03-07src: Make PCI ID define names shorterFelix Singer
2022-02-28mb/google/brya/var/kano: add enable_off_delay_ms to 30David Wu
2022-02-28mb/google/brya/var/kano: Add wifi sar tableDavid Wu
2022-02-18mb/google/brya/var/kano: Use ACPI _PLD macroSubrata Banik
2022-02-18mb/google/brya/var/kano: Fix PLD group orderSubrata Banik
2022-02-09mb/google/var/kano: Add gpios to lockEric Lai
2022-02-09mb/google/brya: Add custom PLD fields to devicetree for brya variantsWon Chung
2022-02-07mb/google/brya/var/kano: adjust I2C3 speedDavid Wu
2022-02-02mb/google/brya: Lock TPM pin in brask and brya baseboardsSubrata Banik
2022-01-26mb/google/brya/var/kano: Reduce reset delay time to 20ms for ELAN TSDavid Wu
2022-01-21mb/google/brya/var/kano: Prevent camera LED blinking during bootJim Lai
2022-01-17mb/google/brya/variants/*: Add cpu pcie rp flagsTracy Wu
2022-01-04mb/google/brya/var/kano: Add stylus probeDavid Wu
2022-01-04mb/google/brya/var/kano: Enable stylus pen powerDavid Wu
2022-01-04mb/google/brya/var/kano: Set vGPIO reset typeDavid Wu
2021-12-23drivers/intel/pmc_mux/conn: Change usb{23}_port_number fields to device pointersReka Norman
2021-12-20mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetreesTim Wawrzynczak
2021-11-30mb/google/brya/var/kano: Enable USB2 port 9 for BlueToothDavid Wu
2021-11-26mb/google/brya/var/kano: swap TPM i2c with TS i2c for the next build phaseDavid Wu
2021-11-25mb/google/brya/var/kano: Update thermal tableDavid Wu
2021-11-25mb/google/brya/var/kano: set power limits for thermalDavid Wu
2021-11-22mb/google/brya: Move cr50 configuration to variantDavid Wu
2021-11-15mb/google/brya/var/kano: Add thermal sensor settingsDavid Wu
2021-11-11mb/google/brya/var/kano: Configure USB2 and USB3 portDavid Wu
2021-11-11mb/google/brya/var/kano: Add gpio-keys ACPI node for PENHDavid Wu
2021-11-09ChromeOS: Fix <vc/google/chromeos/chromeos.h>Kyösti Mälkki
2021-11-04mb/google/brya/var/kano: Update GPIO table for speak and dmicDavid Wu
2021-11-02Revert "mb/google/brya/var/kano: disabled autonomous GPIO power management"David Wu
2021-10-29mb/google/brya/var/kano: disabled autonomous GPIO power managementDavid Wu
2021-10-29mb/google/brya/var/kano: Add fw_config probe for MIPI cameraDavid Wu
2021-10-27mb/google/brya/var/kano: Disable unused PCIE root port in devicetreeDavid Wu
2021-10-27mb/google/brya/var/kano: Update the FIVR configurationsDavid Wu
2021-10-21mb/google/brya/var/kano: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
2021-10-21mb/google/brya/var/kano: Enable BT offload supportDavid Wu
2021-10-19mb/google/brya/var/kano: Correct SSD power sequenceDavid Wu
2021-10-08mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tablesTim Wawrzynczak
2021-10-04mb/google/brya/variants/kano: Correct MIPI camera infoLai, Jim
2021-10-01mb/google/brya/var/kano: Add Synaptics touchpadDavid Wu
2021-09-27mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0David Wu
2021-09-24mb/google/brya/var/kano: Set vGPIO configurationDavid Wu
2021-09-24mb/google/brya/var/kano: Enable EC keyboard backlightDavid Wu
2021-09-24mb/google/brya/var/kano: Enable SaGv supportDavid Wu
2021-09-23mb/google/brya: Migrate brya to use SPD files under spd/Reka Norman
2021-09-20mb/google/brya: Switch to using device pointers using alias namesFurquan Shaikh
2021-09-16mb/google/brya/variants/kano: Add MIPI camera supportDavid Wu
2021-09-11mb/google/brya: Replace white space with tabSubrata Banik
2021-09-09mb/google/brya/variants/kano: Update GPIOs config for kanoDavid Wu
2021-08-24mb/google/brya/variants/kano: Init devicetree for kanoDavid Wu
2021-08-16mb/google/brya/variants/kano: Configure GPIOs according to schematicsDavid Wu
2021-07-28mb/google/brya/var/kano: Generate SPD ID for supported partsDavid Wu
2021-07-12mb/google/brya: Create kano variantDavid Wu
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 10:51:37 +0000