| Age | Commit message (Collapse) | Author |
|---|
|
The LTE module RW101R-GL provide a hardware pin to enable/disable
WWAN RF function.The function is disabled in default and is
controlled by the AT command.Therefore,set the WWAN_RF_DISABLE
Pin to NC, and it has been pull-high by hardware desgin.
BUG=b:368450447
BRANCH=None
TEST= Build firmware and verify the WWAN on/off function in OS.
Change-Id: I47a28342f67f99c5787077c48a01ddbaa77b5967
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
Poweroff does not seem to use the ACPI _OFF function, but rather the
smihandler. Creating variant_smi_sleep function for nami to handle
the power off sequence during reboot/poweroff.
BUG=b:364193909
TEST=emerge-brox coreboot
Change-Id: I0108be4e5e7c0265aae0f16fd4e2b7cbe5936112
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84412
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DTT settings according to b:348285763#comment20 in
order to increase the limit of the charging current to 3A.
BUG=b:348285763
TEST=emerge-brox coreboot, and thermal engineer verifies OK.
Change-Id: I24978afd819666f635c85f2be9b71d39e0a39f27
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84527
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify start-up timing for WWAN RW101R-GL to follow spec:
PWR_EN H H H
FCPO# Tpr H H
RESET# L Ton H
Tpr: delay for Power stable (>0ms)
Ton: delay for reset time (>20ms)
BUG=b:349698817
BRANCH=None
TEST= Build firmware and verify on jubilant with RW101R-GL
Measure the start-up timing sequence to meet spec
Boot up in OS, and confirm WWAN can connect to cell site
Change-Id: I7aa3e7a172143ff1cebea7f48bda45d4fb2c77f7
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For next DVT build, hw adds this power ctrl.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When battery not present, increase PL4 limit from 9 to 40.
Get PL setting from internal thermal and power team.
AC+DC/DC:
PL1=15W
PL2=25W
PL4=114W
AC ONLY:
PL1=15W
PL2=25W
PL4=40W
BUG=b:355094551
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Confirm on lotso EVT board, as expected.
Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:342929824
BRANCH=None
TEST=boot to kernel success
Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
psys is not an optimal solution for no/low battery boot. Hence remove
function and macros related to psys implementation.
BUG=b:335046538
BRANCH=None
TEST=Build and boot on brox board
Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ordering of the USB-C port locations is swapped. When facing the
left panel, the correct ordering is port 1 (left) then port 0 (right).
Swap the positions of the two USB-C ports to their correct values.
BUG=b:349822718
TEST=Booted to OS, confirmed correct physical_location at
/sys/class/typec.
Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit drops redundant CRASHLOG option for the brox and brya
mainboards as SOC_INTEL_CRASHLOG config is now selected by the
Alder Lake SoC directly.
TEST=Able to build and boot google/brox w/o any functional impact of
the crashlog feature.
Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG)
entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON
already selects a crashlog config, and brox baseboard eventually selects
the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG
redundant.
TEST=Successfully built and booted google/brox.
Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1)Modify jubilant cpu power limit setting depend on the brox
baseboad settgins,refer to CL:
https://review.coreboot.org/c/coreboot/+/83752
2)Update PL1,PL2, and PL4 value from jubilant thermal design
PL1 = 15W
PL2 = 41W
PL4 = 87W
BUG=b:364441688
BRANCH=None
TEST=Able to successfully boot on jubilant photo SKU1 and SKU2
boards with AC w/o battery.
Test on AC 65W and 45W w/o battery,and check the PL values.
Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
|
|
When battery is disconnected and only adaptor is connected higher PL2
power draw causes cpu brown out and system does not boot to kernel. To
avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome
power spikes from SoC during boot. Remove Psys implementation as it
impacts active state platform performance.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=Able to successfully boot on 3 different Brox proto2 SKU1
and SKU2 boards with 65W, 45W and 30W adaptors for 3
iterations of cold boot.
Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:362672785
TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is
populated under the right ACPI device scope.
Scope (\_SB.PCI0.XHCI.RHUB.HS10)
{
Name (BRDS, Package (0x02)
{
0x00000001,
Package (0x0A)
{
0x00000012,
0x00000001,
0x00000001,
0x7C,
0x70,
0x70,
0x70,
0x70,
0x70,
0x70
}
})
}
Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:363854853
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
|
|
Remove PL4 value modification based on PsysPL3 value.
BUG=None
BRANCH=None
TEST=Built and boot on brox system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Correct the number of NID entries.
BUG=b:349996984
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I5f5553a5d8014f957d6b89ac4c1039594817bf32
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84184
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable ASPM of CPU PCIe4 for SSD to improve power consumption.
BUG=b:364441213
BRANCH=None
TEST="sh -c 'lspci -vvnn || lspci -nn'"
01:00.0 Non-Volatile memory controller
LnkCtl: ASPM L1 Enabled
Change-Id: I4380bb8748f2847b1824e20edb19578c7aedfe4f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Check that lnkCap supports ASPM L1, so set it to ASPM_L1
to avoid excessive power consumption.
BUG=b:364484621, b:361828368
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
w/o this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+
```
w/ this CL -
```
lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl"
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+
```
Change-Id: I8a7f69bb82ad24b29566541d7694f87f9c6458d6
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84241
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1.
lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update PL1 Min value from 6W to 15W based on the brox thermal cooling
capacity and hardware design.
BUG=None
BRANCH=None
TEST=Build and boot on brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Jubilant FW image.
Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tune I2C2 timing:
Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us"
BUG=b:362685374
TEST= Build jubilant firmware
Measure the i2c signal on jubilant to meet spec:
I2C2 THIGH from 0.494 us to 0.76 us
Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Generate RAM IDs of lp5 memory:
1)Hyinx 4GB*4 H58G56BK8BX068
2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT
BUG=None
TEST=Run part_id_gen tool and check the generated files.
Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT.
The design change to follow the brox's GPE0 routing, and the
FP wake source can be routed.
BUG=b:363166664
TEST= Build jubilant firmware
Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bluetooth driver in kernel requires reset-gpio in current resource
settings (_CRS) and device specific data (_DSD) ACPI objects. Hence
remove ACPI Power Resource for Bluetooth device so that the concerned
ACPI objects get populated.
BUG=b:362817900
TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and
_DSP ACPI objects are filled in the SSDT with the required data.
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x004D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"reset-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS10,
Zero,
Zero,
One
}
}
}
})
Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Update dptf settings from thermal design:
1) Remove fan control and active policy,
since fan is controlled by EC.
2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger
3) Update Pl2 min&max values
BUG=None
TEST= Build jubilant firmware
Generate and check ACPI SSDT.dsl
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Update verb table provided by Realtek on 20240710.
Restults: SNR > 90 (spec>=90).
BUG=b:349996984
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Lotso FW image.
Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This feature is not required in Brox devices. Hence disable the
concerned device.
BUG=None
TEST=Build Brox firmware and boot to OS. Ensure that the concerned
device is disabled in the OS.
Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
|
|
Add the condition of unprovisioned fw_config to enable all storages
and devices. It's for first boot on all storags and preliminary test
in factory when fw_config is unprovisioned.
BUG=None
TEST=Build jubilant firmware and boot to OS on storages when fw_config
is unprovisioned and ensure all devices are enable.
Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Storage devices are very critical to boot to OS. When probe list is
defined for storage devices, all of them get disabled when fw_config is
unprovisioned - a typical situation in the factory. Fix this by
configuring the storage devices in device/override tree to probe and
enable them when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=None
TEST=verify brox DUT is able to power down and stay powered down when
selecting the "Power off" button in the firmware dev screen.
Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting.
BUG=None
TEST=emerge-brox coreboot
Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot.
Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
1.Set unused device's GPIOs to NC based on fw_config.
2.Disable config for nvme, ufs and CNVi based on fw_config.
3.Add fw_config STORAGE_UNKNOWN to enable all storages
for the first boot in factory.
BUG=None
TEST=emerge-brox coreboot chromeos-bootiamge
check fw_config messages in ap log
verify devices on/off by fw_config on jubilant
Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power
them off during suspend. Hence also remove the MPTS ACPI method.
BUG=None
TEST=Build Brox firmware and boot to OS.
Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Brox uses Ti50 which always supports long interrupt pulse. Hence no need
to override GPIO PM.
BUG=None
TEST=Build Brox firmware and boot to OS. Perform suspend/resume for 25
cycles.
Change-Id: I6a138c1953714bc29570db587594cab8f315a4ec
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83856
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I27568d1205216f697b48ffb09ce5208505718978
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83863
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update dptf settings for EVT.
BUG=None
TEST=emerge-brox coreboot chromeos-bootiamge
Change-Id: Iadc95c14da6f879e25dac4804907e340dc16e47f
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83842
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update touchpad settings.
BUG=b:342867386
TEST=ensure touchpad is working.
Change-Id: Ibf62470b7fd921065201894a63d7e2a83dad53ce
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
The Fn key on jubilant emits a scancode of 94 (0x5e).
BUG=b:324079605
TEST=Flash jubilant, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: I963b0aa85598097fea69ec34d1e79ec0bbec3db3
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83821
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SAR Sensor SX9324 for WWAN:
- Apply DRIVERS_I2C_SX9324
- Config GPP_H19 for IRQ
- Add SX9324 registers settings based on tuning value from SEMTECH.
Refer to datasheet:
https://chromeos.google.com/partner/dlm/avl/component/3624/
BUG=b:345327104
TEST=Build and verify on jubilant
Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83779
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
wifi.SetTXPower test fail, so enable wifi sar.
BUG=b:351698478
TEST=emerge-brox coreboot
Change-Id: Ibf5425e72eddc45e376ef4e2d077180dab502200
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Adjust Touchpad I2C fall time configuration such that it meets the
I2C fast mode specification(<= 400KHz).
BUG=b:328670295
TEST=Build Brox firmware and boot to OS. Confirm the I2C bus
frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the
specification.
Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Update GPIOs for WWAN and USB Camera functions.
BUG=b:341188351
TEST=Build and verify on jubilant
Change-Id: I145aa994767ddc59be519b96017af71badf82734
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
BRANCH=None
BUG=b:348171026
TEST=Test on TI PDC device
Cq-Depend: chromium:5691079
Cq-Depend: chromium:5691080
Cq-Depend: chrome-internal:7464767
Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6
Original-Signed-off-by: Bob Moragues <moragues@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The previous uploaded verb table is not fully applied due to
configuration error. Uploaded the verb table provided by Realtek which
can be found in b:336967284.
BUG=b:326412504, b:336967284
TEST=deploy and check volume
Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Terry Cheong <htcheong@chromium.org>
|
|
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV.
Add a section in the verb table to enable class-D calibration based
on the updated verb table provided by Realtek in b:342506575 comment#6.
This improves the offset to be less than 1mV.
BUG=b:342506575
BRANCH=main
TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \
playing -100dB sine waves.
Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Create the jubilant variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:348543712
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_JUBILANT.
Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
This patch adds FW_CONFIG to accommodate different Lotso BoM
components across various SKUs.
1. Fingerprint sensor - FP Present/Absent
BUG=b:350360162
BRANCH=None
TEST=Boot image on SKU2 and check FP working.
Change-Id: I1ee5fcd1c29099bdbee741ef76c00cf45fcc1189
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83388
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
update DTT settings for thermal control,according to b:348285763#comment6.
BUG=b:348285763
TEST=emerge-brox coreboot
Change-Id: I67e16a2596884d501273a5787119406dff7a20f9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83304
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SKU1 is UFS, SKU2 is NON-UFS, it needs to select this config to disable
the MPHY clock in the SKU2 configuration to ensure that S0ix functions
normally.
BUG=b:350609955
BRANCH=None
TEST=Boot image on SKU1/SKU2 and check S0ix working.
Change-Id: I2fbcc7ffaabf3c085a3345ec94a8d45b225b3450
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add hid report address for gt7986u.
BUG=b:342932183
BRANCH=None
TEST=Verify touchscreen work normal.
Change-Id: I464c2691505083314528519f608108c8a31e6cc0
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83201
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Before:
I2C0 - 401kHz
I2C4 - 405kHz
After:
I2C0 - 392kHz
I2C4 - 395kHz
HW: Change R8409/R8411 to 33ohm.
BUG=b:349743464,b:349735055
TEST=emerge-brox sys-boot/coreboot
Test pass by EE
Change-Id: I985837b1b80e973f148529b446905580c0f95e98
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83290
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
|
|
Change-Id: I8ce94c8bc7ed137eaace12d6cb0befa6c0d39a37
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82925
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
ALC257 does not supoort built-in digtal buzzer, So use external pwm
to PCBEEP for beep sound.
BUG=b:346956771
BRANCH=None
TEST=emerge-brox coreboot sys-boot/chromeos-bootimage
firmware-shell: devbeep -> can output beep normally.
Change-Id: If924f9f27f229420e78015f418a97b2d5daf62e5
Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The Fn key on Lotso emits a scancode of 94 (0x5e).
BUG=b:322721490
TEST=Flash Lotso, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: I999627f0ea9db1d79376150a04920ac877a48447
Signed-off-by: Wen Zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83204
Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
On board version 1 and later, touchscreen is not stuffed. Hence
configure the relevant GPIOs as not connected, disable the concerned I2C
bus in the devicetree as well as SoC chip config for board version 1.
BUG=b:347333500
TEST=Build Brox BIOS image and boot to OS. Ensure that there are no
peripherals detected in I2C 1 bus through i2cdetect tool. Ensure that no
touchscreen devices are exported through ACPI SSDT table. Ensure that
other I2C peripherals - eg. Trackpad and Ti50 are functional. Ensure
that the device is able to suspend and resume for 25 cycles.
Change-Id: Ia0578b90b0e8158ae28bcc51add637844ba6acf6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83199
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kernel need the default brightness steps. Otherwise following error
messages are observed in the kernel:
[Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
ACPI BIOS Error (bug): Could not resolve symbol [^^XBCL], AE_NOT_FOUND
ACPI Error: Aborting method \_SB.PCI0.GFX0.LCD0._BCL due to previous
error (AE_NOT_FOUND)
BUG=b:346807006
TEST=Build Brox BIOS image and boot to OS. Ensure that the concerned
error messages are resolved. Ensure that the backlight controls are
functional.
Change-Id: Icd569b0efef31908edb1b7dc384e60a16fc5bd0c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Update board type to BOARD_TYPE_ULT_ULX
BUG=b:348147663
BRANCH=none
TEST=Built and compare the results of
command 'dmidecode --type 17 | grep Speed'
[Before]
Speed: 8400 MT/s
Configured Memory Speed: 6400 MT/s
[After]
Speed: 8400 MT/s
Configured Memory Speed: 5200 MT/s
Change-Id: I049d7c19424f41e83480f4b80bafd6ef8b9e30f6
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
|
|
Set PsysPL2 and PsysPL3 in addition to making adjustments
to PL2 and PL4 in order to prevent brownouts when we don't
have a battery or have an empty battery at boot time.
BUG=b:335046538,b:329722827
BRANCH=None
TEST=flash
Able to successfully boot on a SKU1 with 45W, 60W+ adapters
and SKU2 with a 60W or higher type C adapter.
30W is still being worked on.
Change-Id: Ie36f16b2c938dce29cd2130a86fc8c08f5ba0902
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Lotso's WIFI_BT is same design as brox, copy from brox.
BUG=b:339612353
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I030e306dc5d9d3fcb6314bc491dbf5c9ae60bcb7
Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83126
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
|
|
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: Ic9a7a9062f5c6e45c5bd9617f3b2a0634b8dc1db
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83051
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update verb table provided by Realtek on 20240614.
BUG=b:344471736
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Device list:
cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name
ALC257
cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name
Realtek
Headphone detection:
Event: time 1718633617.056092, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1
Event: time 1718633621.471708, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0
Event: time 1718633623.898046, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1
Event: time 1718633625.743663, type 1 (EV_KEY), code 115
(KEY_VOLUMEUP), value 1
Event: time 1718633625.743678, type 1 (EV_KEY), code 115
(KEY_VOLUMEUP), value 0
Change-Id: Idde8963de9302849f87b7c262f17d9c9d99b46dc
Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83109
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 0e0bc618e3ed1888ac140010057dc7485443c3c2.
Reason for revert: Merged out of order, breaks tree
Change-Id: I22bd85a2008db471177257a8b779c06898b1010c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83105
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Lotso's WIFI_BT is same design as brox, copy from brox.
BUG=b:339612353
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I3946297db7f10a31570f773bdc5665f9f472c9fe
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83053
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Generate RAM IDs for
K3KL6L60GM-MGCT
H9JCNNNBK3MLYR-N6E
K3KL8L80DM-MGCU
MT62F1G32D2DS-023 WT:C
H58G56BK8BX068
BUG=b:333494257
BRANCH=None
TEST=Run part_id_gen tool without any errors
Change-Id: I7a240a263816193b9f3d418385c1673e9d3f89db
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
|
|
Based on lotso EVT schematics update gpio settings.
GSPI0_CS0_L -> NF7
GSPI0_MISO -> NF7
GSPI0_MISO -> NF7
GPP_F18 -> EDGE_SINGLE
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I12d84538566c4d51fe346eb5609e55d91ddafbea
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
|
|
Current existing temperature thresholds of TSR1 sensor are set at 60C
to start fan. Due to this CPU gets hot and temperature goes over 80C.
In this situation, fan does not even start to lower down CPU temperature.
With updated new settings based on tuning from thermal team, start fan
early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C.
BUG=b:339493551
TEST=Built and tested on google/brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Based on lotso EVT schematics add dq map settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
|
|
Based on lotso EVT schematics update gpio settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image.
This patch enables Sign of Life image during MRC training.
BUG=b:335369811
TEST=Able to boot to ChromeOS with SOL image.
CPU log:
[SPEW ] bootmode is set to: 0 (boot with full config)
[0.384818] DP PHY mode status not complete
[0.388911] DP PHY mode status not complete
[0.393197] DP PHY mode status not complete
[0.397484] DP PHY mode status not complete
[0.401771] DP PHY mode status not complete
[0.406057] DP PHY mode status not complete
[0.410345] DP PHY mode status not complete
[0.414632] DP PHY mode status not complete
[0.418916] DP PHY mode status not complete
[0.423203] DP PHY mode status not complete
[0.427491] DP PHY mode status not complete
[0.431777] DP PHY mode status not complete
[INFO ] Informing user on-display of memory training.
[DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes)
[WARN ] CBFS: 'preram_locales' not found.
[ERROR] ux_locales_get_text: preram_locales not found.
[DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes)
[INFO ] ELOG: NV offset 0xf20000 size 0x4000
elogtool list:
0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088
1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown
2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success
3 | 2024-05-10 02:27:09-0700 | System boot | 4
4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled
5 | 2024-05-10 02:27:11-0700 | System Reset
6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown
7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5
8 | 2024-05-10 02:27:36-0700 | System boot | 5
9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled
10 | 2024-05-10 02:27:37-0700 | System Reset
11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown
Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
|
|
The Type-C kernel driver no longer programs the AP mux, as of
https://review.coreboot.org/c/coreboot/+/82077. So remove device
references to the TCSS Mux control device from the Type-C port driver.
This eliminates the following kernel error which was observed as a
result of the kernel trying to program muxes it no longer has control
over:
[ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95
[ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95
BUG=b:341331428
TEST=Run system reboot; configure mux kernel errors no longer seen.
Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd.
The new verb table breaks external mic detection on brox.
Revert and use old verb tables instead.
BUG=b:330433089
BRANCH=main
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256)
Update to Realtek provided verb table for ALC236 audio codec.
BUG=b:336967284
TEST=Verified headset and audio workable on DUT with "rec" and
"aplay" command.
Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy the data.vbt from brox to greenbayupoc
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematics GREENBAY_0412.SCH update the gpio and
devicetree settings.
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Cq-Depend:chrome-internal:7218819
Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Disable c1 state auto-demotion support for brox
BUG=None
BRANCH=None
TEST=Boot brox and verify in fsp debug logs
Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure SODIMM settings for greenbayupoc. The SODIMM settings are
copied from mainboard/google/brya/variants/baseboard/brask/memory.c.
BUG=b:336955026, b:332230842
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot to OS
using Hynix HMAG56EXNSA051N 4G and Micron MTA8AFT1G64HZ-3G2R1 8G SODIMM.
Change-Id: I1552cadfa81c48fe561947ded078bcca2e6bc6ad
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82085
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Currently EOP message is sent to CSE late in the boot flow. Instead send
it asynchronously to save ~10 ms in boot time.
BUG=b:337330958
TEST=Build Brox BIOS Image and boot to OS.
Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and
wakeup successfully using Wake on WLAN.
268 | 2024-05-07 13:56:44-0700 | S0ix Enter
269 | 2024-05-07 13:57:07-0700 | S0ix Exit
270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3
271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3
273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0
274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3
275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3
Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Brox HW design, the PsysPmax is supposed to be 208W.
This patch changes PsysPmax setting from 21.5W to 208W.
Change-Id: I43f4b00a54dc0dfe6bd690492f9ef92698c9b903
Signed-off-by: Lawrence Chang <lawrence.chang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Brox uses PDC<->PMC direct connection for USBC mux configuration. Select
SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it. This
patch also adds additional dependency on ENABLE_TCSS_USB_DETECTION to be
selected only when PDC<->PMC direct connection and CHROMEOS is not used.
BUG=b:332383540
TEST=USB3 plugged during G3, is detected after system boots from G3.
Cq-Depend: chromium:5484387
Cq-Depend: chrome-internal:7106592
Change-Id: I0f62943f87d8fb6eb494c0aca3ef08c33cd05ffd
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total
SPD size of 512 bytes. Set this as the default and remove the setting
from mainboard Kconfigs.
Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPP_D14 is floating when ISH is not being used and wasting power. Add
pulldown to prevent this from happening.
BUG=b:336654954
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
make sure OS boots up
HW team validated that power usage is 20 mW lower
Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup
using Trackpad.
246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3
247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3
248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67
249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3
250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3
251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67
Also suspend to S0ix and wakeup using Trackpad.
Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config
field to prevent depthcharge build break.
BUG=b:333494257
TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage
Change-Id: Idb62e3f37e1480979ae529692455beb533434520
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir")
introduces a variant-specific file for the HDA verb tables, which
commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing
which caused the build to fail when both patches were submitted. To fix
the tree, add this file to the newly created lotso variant.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create the lotso variant of the brox reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:333494257
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_LOTSO
Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Others variant boards might use diff HDA Codec, so move hda verb
to brox variant dir.
BUG=b:314702466
BRANCH=None
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Device list:
cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name
ALC256
cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name
Realtek
Headphone detection:
evtest 8
Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1
Event: time 1713404716.656768, -------------- SYN_REPORT ------------
Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0
Event: time 1713404722.802661, -------------- SYN_REPORT ------------
Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945
Reviewed-by: Poornima Tom <poornima.tom@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config
field to prevent depthcharge build break.
BUG=b:333325006
TEST=emerge-brox coreboot depthcharge with no errors
Change-Id: I0e220787d6ac73ec8fa2469ed958981d0801920e
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Enable SaGv support for brox
BUG=None
BRANCH=None
TEST=Boot brox with SAGv enabled and verify in fsp debug logs
Change-Id: I80c44e7df1d75732c6982b27e44ecd6060b1b3f1
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81556
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the greenbayupoc variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:329530883
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_GREENBAYUPOC.
Change-Id: I90936d97b41e59c49dd92997146caf580bce1f4f
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also
initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took
the liberty of alphabetizing all the ISH GPIOs to they're easier to
search through.
BUG=b:316421831
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Make sure that brox device still boots up with this change.
Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct verbtable value for pin widget 20 of Realtek ALC256 based on the
updated verbtable received from Realtek. Updated Version : 5.0.3.1. This
fixes the headset detection failure, when power_save is enabled in
legacy hda driver.
BUG=b:330433089
BRANCH=None
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I71b7d59b3ab5310a0b6cdb31fb5033f94263d151
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81654
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Terry Cheong <htcheong@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Enable SMLINK1 interface for PMC-PD communication to configure Type-C
muxes.
Refer RPL EDS vol 1: 765585.
BUG=b:327622474
BRANCH=None
TEST=Boot image on SKU2 and check PMC-PD working.
Change-Id: Ia678d291e7a14aefe09026e70478fea3f68c8e10
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81207
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Deepti Deshatty <deepti.deshatty@intel.com>
|
