summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brox
AgeCommit message (Collapse)Author
2024-10-21mb/google/brox/jubilant: Modify WWAN Rolling RW101R-GL power sequenceRen Kuo
There is no ACPI power resource for LTE module Rolling RW101R-GL, therefore implement the power sequence of power-on, power-off, and reset timing from GPIO init, bootstate init callbacks, and smihandler function. BUG=b:368450447 BRANCH=None TEST= Build firmware and verify on jubilant with LTE:RW101R-GL. Measure the power on, power off, and reset timing. Run warm boot, cold boot and suspend/resume to make sure WWAN devcie is workable. Change-Id: I4a205e3db777c7c225d31b6cc802883fd7167089 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-10-21mb/google/brox/jubilant: Update CPU power limitsRen Kuo
Update jubilant CPU PL4 from 9 watt to 14 watt for critical battery boot. The maximum peak power is set at 14 watt which is 45W multiplied by 32% efficiency. Overriding power limits for AC power without battery: PL1 (15000, 18000) PL2 (41000, 41000) PL4 (14) BUG=b:364441688 BRANCH=None TEST=Able to successfully boot on jubilant SKU1 and SKU2 with AC only. Test on AC 65W and 45W w/o battery, and check PL4 values from log. Change-Id: Id1e58797206a61d241f48b057b304e05c9c323d9 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84784 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-13mb/google/brox/var/lotso: Reduce gspi speed from 10 MHz to 9 MHzKun Liu
Reduce gspi speed from 10 MHz to 9 MHz, because Raptor Lake Refresh platform GSPI supports max frequency 9 MHz. BUG=b:342932183 TEST=emerge-brox coreboot Change-Id: If5b7885d95cfe21ec71cc37e6d72419935b0844f Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84708 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-12mb/google/brox/lotso: Enable devices on unprovisioned fw_configWentao Qin
Setting devices to unprovisioned allows us to perform functional testing without having to rewrite the fw config during the SMT phase of factory production. BUG=None TEST=Build lotso firmware and boot to OS when fw_config is unprovisioned and ensure all devices are enable. Change-Id: I3b8285ce335ee0f3595d184eb0921f697bdbd0c2 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84714 Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-10-08mb/google/brox/jubilant: Update FP IRQ pin to GPP_D13 in fp_disable_padsRen Kuo
Commit 8cfe1b3302ff (mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13): CB:84124, changes the fingerprint IRQ pin from GPP_F15 to GPP_D13, but forgot to update the pin in the array fp_disable_pads. Hence update fp_disable_pads configuration to include that GPIO. BUG=None TEST= build firmware $ emerge-brox coreboot Change-Id: Iee4c3d3f000f884ca8a77ae8c72ccbeebfeb865f Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84545 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-10-07mb/*: Explicitly include static.h for config_of_socNicholas Chin
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h"), sources that require access to the devicetree should directly include static.h so that it can be removed from device.h, eliminating unnecessary dependencies on static.h for files that only need the types and function declarations in device.h. Change-Id: Ia793666fda47678764fd33891fddb4aecf207bd4 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-10-02mb/google/brox/jubilant: Modify GPIO for WWANRen Kuo
The LTE module RW101R-GL provide a hardware pin to enable/disable WWAN RF function.The function is disabled in default and is controlled by the AT command.Therefore,set the WWAN_RF_DISABLE Pin to NC, and it has been pull-high by hardware desgin. BUG=b:368450447 BRANCH=None TEST= Build firmware and verify the WWAN on/off function in OS. Change-Id: I47a28342f67f99c5787077c48a01ddbaa77b5967 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-09-30mb/google/brox/var/lotso: Fix goodix touchscreen power off sequenceKun Liu
Poweroff does not seem to use the ACPI _OFF function, but rather the smihandler. Creating variant_smi_sleep function for nami to handle the power off sequence during reboot/poweroff. BUG=b:364193909 TEST=emerge-brox coreboot Change-Id: I0108be4e5e7c0265aae0f16fd4e2b7cbe5936112 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84412 Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-30mb/google/brox/var/lotso: Update DTT settings for thermal controlKun Liu
Update DTT settings according to b:348285763#comment20 in order to increase the limit of the charging current to 3A. BUG=b:348285763 TEST=emerge-brox coreboot, and thermal engineer verifies OK. Change-Id: I24978afd819666f635c85f2be9b71d39e0a39f27 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84527 Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-30mb/google/brox/jubilant: Modify start-up timing for WWAN RW101R-GLRen Kuo
Modify start-up timing for WWAN RW101R-GL to follow spec: PWR_EN H H H FCPO# Tpr H H RESET# L Ton H Tpr: delay for Power stable (>0ms) Ton: delay for reset time (>20ms) BUG=b:349698817 BRANCH=None TEST= Build firmware and verify on jubilant with RW101R-GL Measure the start-up timing sequence to meet spec Boot up in OS, and confirm WWAN can connect to cell site Change-Id: I7aa3e7a172143ff1cebea7f48bda45d4fb2c77f7 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-25mb/google/brox/var/lotso: Add RTS522A vdd ctrl by GPP_A17Jian Tong
For next DVT build, hw adds this power ctrl. BUG=b:359409425 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brox/var/lotso: Update cpu power limitsJian Tong
When battery not present, increase PL4 limit from 9 to 40. Get PL setting from internal thermal and power team. AC+DC/DC: PL1=15W PL2=25W PL4=114W AC ONLY: PL1=15W PL2=25W PL4=40W BUG=b:355094551 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Confirm on lotso EVT board, as expected. Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brox/var/lotso: Generate RAM ID for H58G56BK7BX068Jian Tong
BUG=b:342929824 BRANCH=None TEST=boot to kernel success Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-19mb/google/brox: Remove psys related implementationSowmya Aralguppe
psys is not an optimal solution for no/low battery boot. Hence remove function and macros related to psys implementation. BUG=b:335046538 BRANCH=None TEST=Build and boot on brox board Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-18mb/google/brox: Switch USB-C port locationsJameson Thies
The ordering of the USB-C port locations is swapped. When facing the left panel, the correct ordering is port 1 (left) then port 0 (right). Swap the positions of the two USB-C ports to their correct values. BUG=b:349822718 TEST=Booted to OS, confirmed correct physical_location at /sys/class/typec. Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mainboard/google/{brox,brya}: Drop redundant CRASHLOG configSubrata Banik
This commit drops redundant CRASHLOG option for the brox and brya mainboards as SOC_INTEL_CRASHLOG config is now selected by the Alder Lake SoC directly. TEST=Able to build and boot google/brox w/o any functional impact of the crashlog feature. Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mb/google/brox: Drop redundant entries of crashlog configSubrata Banik
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG) entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON already selects a crashlog config, and brox baseboard eventually selects the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG redundant. TEST=Successfully built and booted google/brox. Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-16mb/google/brox/jubilant: Update cpu power limit settingsRen Kuo
1)Modify jubilant cpu power limit setting depend on the brox baseboad settgins,refer to CL: https://review.coreboot.org/c/coreboot/+/83752 2)Update PL1,PL2, and PL4 value from jubilant thermal design PL1 = 15W PL2 = 41W PL4 = 87W BUG=b:364441688 BRANCH=None TEST=Able to successfully boot on jubilant photo SKU1 and SKU2 boards with AC w/o battery. Test on AC 65W and 45W w/o battery,and check the PL values. Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-09-13mb/google/brox: Fix booting to kernel without batterySowmya Aralguppe
When battery is disconnected and only adaptor is connected higher PL2 power draw causes cpu brown out and system does not boot to kernel. To avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome power spikes from SoC during boot. Remove Psys implementation as it impacts active state platform performance. BUG=b:335046538,b:329722827 BRANCH=None TEST=Able to successfully boot on 3 different Brox proto2 SKU1 and SKU2 boards with 65W, 45W and 30W adaptors for 3 iterations of cold boot. Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-12mb/google/brox: Set PCIE WLAN bluetooth companion deviceKarthikeyan Ramasubramanian
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:362672785 TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is populated under the right ACPI device scope. Scope (\_SB.PCI0.XHCI.RHUB.HS10) { Name (BRDS, Package (0x02) { 0x00000001, Package (0x0A) { 0x00000012, 0x00000001, 0x00000001, 0x7C, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70 } }) } Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-12mb/google/brox/var/brox: Enable ASPM for PCIe4 SSD of CPUKarthikeyan Ramasubramanian
Check that lnkCap supports ASPM L1, so set it to ASPM_L1 to avoid excessive power consumption. BUG=b:363854853 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: <srinivas.kulkarni@intel.com>
2024-09-12mb/google/brox/variants/brox: remove PL4 value modificationSumeet Pawnikar
Remove PL4 value modification based on PsysPL3 value. BUG=None BRANCH=None TEST=Built and boot on brox system Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-11mb/google/brox/var/lotso: Update verb tableJian Tong
Correct the number of NID entries. BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I5f5553a5d8014f957d6b89ac4c1039594817bf32 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84184 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-11mb/google/brox/var/jubilant: Enable ASPM for PCIe4 SSD of CPURen Kuo
Enable ASPM of CPU PCIe4 for SSD to improve power consumption. BUG=b:364441213 BRANCH=None TEST="sh -c 'lspci -vvnn || lspci -nn'" 01:00.0 Non-Volatile memory controller LnkCtl: ASPM L1 Enabled Change-Id: I4380bb8748f2847b1824e20edb19578c7aedfe4f Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-10mb/google/brox/var/lotso: Enable ASPM for PCIe4 SSD of CPUWentao Qin
Check that lnkCap supports ASPM L1, so set it to ASPM_L1 to avoid excessive power consumption. BUG=b:364484621, b:361828368 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage w/o this CL - ``` lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl" LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ``` w/ this CL - ``` lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl" LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ``` Change-Id: I8a7f69bb82ad24b29566541d7694f87f9c6458d6 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84241 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-06mb/google/brox/var/lotso: remove unused cam enable_gpioJian Tong
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-06mb/google/brox/var/lotso: disable RTS5227 PCIE L0s supportJian Tong
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1. lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled. BUG=b:359409425 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-06mb/google/brox/variants/brox: Update PL1 MinSumeet Pawnikar
Update PL1 Min value from 6W to 15W based on the brox thermal cooling capacity and hardware design. BUG=None BRANCH=None TEST=Build and boot on brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-05mb/google/brox/var/jubilant: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Jubilant FW image. Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-04mb/google/brox/jubilant: Tune I2C timingRen Kuo
Tune I2C2 timing: Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us" BUG=b:362685374 TEST= Build jubilant firmware Measure the i2c signal on jubilant to meet spec: I2C2 THIGH from 0.494 us to 0.76 us Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-04tree: Use boolean for disable_package_c_state_demotionElyes Haouas
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_c1_state_auto_demotionElyes Haouas
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-03mb/google/brox/jubilant: Generate RAM IDsRen Kuo
Generate RAM IDs of lp5 memory: 1)Hyinx 4GB*4 H58G56BK8BX068 2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT BUG=None TEST=Run part_id_gen tool and check the generated files. Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-09-03mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13Ren Kuo
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT. The design change to follow the brox's GPE0 routing, and the FP wake source can be routed. BUG=b:363166664 TEST= Build jubilant firmware Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/brox: Remove ACPI Power Resource for Bluetooth deviceKarthikeyan Ramasubramanian
Bluetooth driver in kernel requires reset-gpio in current resource settings (_CRS) and device specific data (_DSD) ACPI objects. Hence remove ACPI Power Resource for Bluetooth device so that the concerned ACPI objects get populated. BUG=b:362817900 TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and _DSP ACPI objects are filled in the SSDT with the required data. Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x004D } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS10, Zero, Zero, One } } } }) Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-09-02mb/google/brox/jubilant: Update dptf settingsRen Kuo
Update dptf settings from thermal design: 1) Remove fan control and active policy, since fan is controlled by EC. 2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger 3) Update Pl2 min&max values BUG=None TEST= Build jubilant firmware Generate and check ACPI SSDT.dsl $ cat /sys/firmware/acpi/tables/SSDT > SSDT $ iasl -d SSDT Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-02mb/google/brox/var/lotso: Update verb tableJian Tong
Update verb table provided by Realtek on 20240710. Restults: SNR > 90 (spec>=90). BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-01tree: Use boolean for s0ix_enableElyes Haouas
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-08-28mb/google/brox/var/lotso: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Lotso FW image. Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-28mb/google/brox: Disable Thunderbolt deviceKarthikeyan Ramasubramanian
This feature is not required in Brox devices. Hence disable the concerned device. BUG=None TEST=Build Brox firmware and boot to OS. Ensure that the concerned device is disabled in the OS. Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093 Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
2024-08-22mb/google/brox/var/jubilant: Enable devices on unprovisioned fw_configRen Kuo
Add the condition of unprovisioned fw_config to enable all storages and devices. It's for first boot on all storags and preliminary test in factory when fw_config is unprovisioned. BUG=None TEST=Build jubilant firmware and boot to OS on storages when fw_config is unprovisioned and ensure all devices are enable. Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/brox: Enable storage devices on unprovisioned fw_configKarthikeyan Ramasubramanian
Storage devices are very critical to boot to OS. When probe list is defined for storage devices, all of them get disabled when fw_config is unprovisioned - a typical situation in the factory. Fix this by configuring the storage devices in device/override tree to probe and enable them when fw_config is unprovisioned. BUG=None TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned. Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brox: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify brox DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-19mb/google/brox/jubilant: Update fw_configMorris Hsu
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting. BUG=None TEST=emerge-brox coreboot Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot. Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-08-15mb/google/brox/jubilant: Disable devcies and GPIOs by fw_configMorris Hsu
1.Set unused device's GPIOs to NC based on fw_config. 2.Disable config for nvme, ufs and CNVi based on fw_config. 3.Add fw_config STORAGE_UNKNOWN to enable all storages for the first boot in factory. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge check fw_config messages in ap log verify devices on/off by fw_config on jubilant Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-14mb/google/brox: Remove Mainboard Prepare to Sleep(MPTS) ACPI methodKarthikeyan Ramasubramanian
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power them off during suspend. Hence also remove the MPTS ACPI method. BUG=None TEST=Build Brox firmware and boot to OS. Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/brox: Do not override GPIO PMKarthikeyan Ramasubramanian
Brox uses Ti50 which always supports long interrupt pulse. Hence no need to override GPIO PM. BUG=None TEST=Build Brox firmware and boot to OS. Perform suspend/resume for 25 cycles. Change-Id: I6a138c1953714bc29570db587594cab8f315a4ec Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83856 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11tree: Use boolean for pch_hda_sdi_enable[]Elyes Haouas
Change-Id: I27568d1205216f697b48ffb09ce5208505718978 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83863 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetree for dptf settingsMorris Hsu
Update dptf settings for EVT. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge Change-Id: Iadc95c14da6f879e25dac4804907e340dc16e47f Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83842 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetreeMorris Hsu
Update touchpad settings. BUG=b:342867386 TEST=ensure touchpad is working. Change-Id: Ibf62470b7fd921065201894a63d7e2a83dad53ce Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-09mb/google/brox/jubilant: Add Fn key scancodeMorris Hsu
The Fn key on jubilant emits a scancode of 94 (0x5e). BUG=b:324079605 TEST=Flash jubilant, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I963b0aa85598097fea69ec34d1e79ec0bbec3db3 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83821 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09mb/google/brox/var/jubilant: Add SAR sensor SX9324Ren Kuo
Add SAR Sensor SX9324 for WWAN: - Apply DRIVERS_I2C_SX9324 - Config GPP_H19 for IRQ - Add SX9324 registers settings based on tuning value from SEMTECH. Refer to datasheet: https://chromeos.google.com/partner/dlm/avl/component/3624/ BUG=b:345327104 TEST=Build and verify on jubilant Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83779 Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-09mb/google/brox/var/lotso: Enable wifi sarKun Liu
wifi.SetTXPower test fail, so enable wifi sar. BUG=b:351698478 TEST=emerge-brox coreboot Change-Id: Ibf5425e72eddc45e376ef4e2d077180dab502200 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-07mb/google/brox: Tune Touchpad I2C parametersKarthikeyan Ramasubramanian
Adjust Touchpad I2C fall time configuration such that it meets the I2C fast mode specification(<= 400KHz). BUG=b:328670295 TEST=Build Brox firmware and boot to OS. Confirm the I2C bus frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the specification. Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2024-08-06mb/google/brox/var/jubilant: Update WWAN and UsbCam SettingsRen Kuo
Update GPIOs for WWAN and USB Camera functions. BUG=b:341188351 TEST=Build and verify on jubilant Change-Id: I145aa994767ddc59be519b96017af71badf82734 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2024-08-05mb/google/brox: Add model brox-ti-pdcBob Moragues
BRANCH=None BUG=b:348171026 TEST=Test on TI PDC device Cq-Depend: chromium:5691079 Cq-Depend: chromium:5691080 Cq-Depend: chrome-internal:7464767 Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6 Original-Signed-off-by: Bob Moragues <moragues@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110 Original-Reviewed-by: YH Lin <yueherngl@chromium.org> Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-02mb/google/brox/var/greenbayupoc: update ALC236 verb tableWu Garen
The previous uploaded verb table is not fully applied due to configuration error. Uploaded the verb table provided by Realtek which can be found in b:336967284. BUG=b:326412504, b:336967284 TEST=deploy and check volume Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Terry Cheong <htcheong@chromium.org>
2024-08-02mb/google/brox/var/brox: Enable Class-D calibrationTerry Cheong
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV. Add a section in the verb table to enable class-D calibration based on the updated verb table provided by Realtek in b:342506575 comment#6. This improves the offset to be less than 1mV. BUG=b:342506575 BRANCH=main TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \ playing -100dB sine waves. Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-01mb/google/brox: Create jubilant variantRen Kuo
Create the jubilant variant of the brox reference board by copying the template files to a new directory named for the variant. BUG=b:348543712 TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_JUBILANT. Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-07-12mb/google/brox/var/lotso: Add FW_CONFIG for FPWentao Qin
This patch adds FW_CONFIG to accommodate different Lotso BoM components across various SKUs. 1. Fingerprint sensor - FP Present/Absent BUG=b:350360162 BRANCH=None TEST=Boot image on SKU2 and check FP working. Change-Id: I1ee5fcd1c29099bdbee741ef76c00cf45fcc1189 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83388 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-08mb/google/brox/var/lotso: Update DTT settings for thermal controlKun Liu
update DTT settings for thermal control,according to b:348285763#comment6. BUG=b:348285763 TEST=emerge-brox coreboot Change-Id: I67e16a2596884d501273a5787119406dff7a20f9 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83304 Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-05mb/google/brox/var/lotso: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSWentao Qin
SKU1 is UFS, SKU2 is NON-UFS, it needs to select this config to disable the MPHY clock in the SKU2 configuration to ensure that S0ix functions normally. BUG=b:350609955 BRANCH=None TEST=Boot image on SKU1/SKU2 and check S0ix working. Change-Id: I2fbcc7ffaabf3c085a3345ec94a8d45b225b3450 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-07-04mb/google/lotso: Add hid report address for gt7986uKun Liu
Add hid report address for gt7986u. BUG=b:342932183 BRANCH=None TEST=Verify touchscreen work normal. Change-Id: I464c2691505083314528519f608108c8a31e6cc0 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83201 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-07-03mb/google/brox/var/lotso: Tune I2C frequency for 400 kHzJing Tong
Before: I2C0 - 401kHz I2C4 - 405kHz After: I2C0 - 392kHz I2C4 - 395kHz HW: Change R8409/R8411 to 33ohm. BUG=b:349743464,b:349735055 TEST=emerge-brox sys-boot/coreboot Test pass by EE Change-Id: I985837b1b80e973f148529b446905580c0f95e98 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83290 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
2024-06-28mb/google/brox/variants/brox/fw_config.c: Remove unused macroElyes Haouas
Change-Id: I8ce94c8bc7ed137eaace12d6cb0befa6c0d39a37 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82925 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-27mb/google/brox/var/lotso: GPP_B14 used for buzzerJing Tong
ALC257 does not supoort built-in digtal buzzer, So use external pwm to PCBEEP for beep sound. BUG=b:346956771 BRANCH=None TEST=emerge-brox coreboot sys-boot/chromeos-bootimage firmware-shell: devbeep -> can output beep normally. Change-Id: If924f9f27f229420e78015f418a97b2d5daf62e5 Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-26mb/google/brox/lotso: Add Fn key scancodeWen Zhang
The Fn key on Lotso emits a scancode of 94 (0x5e). BUG=b:322721490 TEST=Flash Lotso, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I999627f0ea9db1d79376150a04920ac877a48447 Signed-off-by: Wen Zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83204 Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-26mb/google/brox: Disable Touchscreen for hardware board version 1Karthikeyan Ramasubramanian
On board version 1 and later, touchscreen is not stuffed. Hence configure the relevant GPIOs as not connected, disable the concerned I2C bus in the devicetree as well as SoC chip config for board version 1. BUG=b:347333500 TEST=Build Brox BIOS image and boot to OS. Ensure that there are no peripherals detected in I2C 1 bus through i2cdetect tool. Ensure that no touchscreen devices are exported through ACPI SSDT table. Ensure that other I2C peripherals - eg. Trackpad and Ti50 are functional. Ensure that the device is able to suspend and resume for 25 cycles. Change-Id: Ia0578b90b0e8158ae28bcc51add637844ba6acf6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83199 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-26mb/google/brox: Add default ACPI brightness levelsKarthikeyan Ramasubramanian
Kernel need the default brightness steps. Otherwise following error messages are observed in the kernel: [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS ACPI BIOS Error (bug): Could not resolve symbol [^^XBCL], AE_NOT_FOUND ACPI Error: Aborting method \_SB.PCI0.GFX0.LCD0._BCL due to previous error (AE_NOT_FOUND) BUG=b:346807006 TEST=Build Brox BIOS image and boot to OS. Ensure that the concerned error messages are resolved. Ensure that the backlight controls are functional. Change-Id: Icd569b0efef31908edb1b7dc384e60a16fc5bd0c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-06-25lotso: Update board type to BOARD_TYPE_ULT_ULXKun Liu
Update board type to BOARD_TYPE_ULT_ULX BUG=b:348147663 BRANCH=none TEST=Built and compare the results of command 'dmidecode --type 17 | grep Speed' [Before] Speed: 8400 MT/s Configured Memory Speed: 6400 MT/s [After] Speed: 8400 MT/s Configured Memory Speed: 5200 MT/s Change-Id: I049d7c19424f41e83480f4b80bafd6ef8b9e30f6 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
2024-06-24mb/google/brox: Add support for batteryless bootingShelley Chen
Set PsysPL2 and PsysPL3 in addition to making adjustments to PL2 and PL4 in order to prevent brownouts when we don't have a battery or have an empty battery at boot time. BUG=b:335046538,b:329722827 BRANCH=None TEST=flash Able to successfully boot on a SKU1 with 45W, 60W+ adapters and SKU2 with a 60W or higher type C adapter. 30W is still being worked on. Change-Id: Ie36f16b2c938dce29cd2130a86fc8c08f5ba0902 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-20mb/google/brox/var/lotso: enable CNVi bluetoothJing Tong
Lotso's WIFI_BT is same design as brox, copy from brox. BUG=b:339612353 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I030e306dc5d9d3fcb6314bc491dbf5c9ae60bcb7 Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83126 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
2024-06-19mb/google/brox/var/lotso: Update devicetree settingJian Tong
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: Ic9a7a9062f5c6e45c5bd9617f3b2a0634b8dc1db Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83051 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-19mb/google/brox/var/lotso: Update verb table from ALC256 to ALC257Jing Tong
Update verb table provided by Realtek on 20240614. BUG=b:344471736 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC257 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: Event: time 1718633617.056092, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1718633621.471708, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1718633623.898046, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1718633625.743663, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1 Event: time 1718633625.743678, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0 Change-Id: Idde8963de9302849f87b7c262f17d9c9d99b46dc Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83109 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-17Revert "mb/google/brox/var/lotso: enable CNVi bluetooth"Matt DeVillier
This reverts commit 0e0bc618e3ed1888ac140010057dc7485443c3c2. Reason for revert: Merged out of order, breaks tree Change-Id: I22bd85a2008db471177257a8b779c06898b1010c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83105 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-17mb/google/brox/var/lotso: enable CNVi bluetoothJian Tong
Lotso's WIFI_BT is same design as brox, copy from brox. BUG=b:339612353 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I3946297db7f10a31570f773bdc5665f9f472c9fe Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83053 Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-12mb/google/brox: Generate RAM IDsKun Liu
Generate RAM IDs for K3KL6L60GM-MGCT H9JCNNNBK3MLYR-N6E K3KL8L80DM-MGCU MT62F1G32D2DS-023 WT:C H58G56BK8BX068 BUG=b:333494257 BRANCH=None TEST=Run part_id_gen tool without any errors Change-Id: I7a240a263816193b9f3d418385c1673e9d3f89db Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
2024-06-12mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. GSPI0_CS0_L -> NF7 GSPI0_MISO -> NF7 GSPI0_MISO -> NF7 GPP_F18 -> EDGE_SINGLE BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I12d84538566c4d51fe346eb5609e55d91ddafbea Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
2024-06-07mb/google/brox/var/brox: update thermal settings to start fan earlySumeet Pawnikar
Current existing temperature thresholds of TSR1 sensor are set at 60C to start fan. Due to this CPU gets hot and temperature goes over 80C. In this situation, fan does not even start to lower down CPU temperature. With updated new settings based on tuning from thermal team, start fan early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C. BUG=b:339493551 TEST=Built and tested on google/brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-06mb/google/brox/var/lotso: Add dq map settingJian Tong
Based on lotso EVT schematics add dq map settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
2024-06-05mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-05-28mb/google/brox: Add romstage early graphicsSowmya Aralguppe
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image. This patch enables Sign of Life image during MRC training. BUG=b:335369811 TEST=Able to boot to ChromeOS with SOL image. CPU log: [SPEW ] bootmode is set to: 0 (boot with full config) [0.384818] DP PHY mode status not complete [0.388911] DP PHY mode status not complete [0.393197] DP PHY mode status not complete [0.397484] DP PHY mode status not complete [0.401771] DP PHY mode status not complete [0.406057] DP PHY mode status not complete [0.410345] DP PHY mode status not complete [0.414632] DP PHY mode status not complete [0.418916] DP PHY mode status not complete [0.423203] DP PHY mode status not complete [0.427491] DP PHY mode status not complete [0.431777] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. [DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes) [WARN ] CBFS: 'preram_locales' not found. [ERROR] ux_locales_get_text: preram_locales not found. [DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes) [INFO ] ELOG: NV offset 0xf20000 size 0x4000  elogtool list: 0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088 1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown 2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success 3 | 2024-05-10 02:27:09-0700 | System boot | 4 4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled 5 | 2024-05-10 02:27:11-0700 | System Reset 6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown 7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5 8 | 2024-05-10 02:27:36-0700 | System boot | 5 9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled 10 | 2024-05-10 02:27:37-0700 | System Reset 11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
2024-05-23mb/google/brox/var/brox: Remove mux references from typec portPrashant Malani
The Type-C kernel driver no longer programs the AP mux, as of https://review.coreboot.org/c/coreboot/+/82077. So remove device references to the TCSS Mux control device from the Type-C port driver. This eliminates the following kernel error which was observed as a result of the kernel trying to program muxes it no longer has control over: [ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95 [ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95 BUG=b:341331428 TEST=Run system reboot; configure mux kernel errors no longer seen. Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/brox: Update verb table to fix headset detection"Terry Cheong
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd. The new verb table breaks external mic detection on brox. Revert and use old verb tables instead. BUG=b:330433089 BRANCH=main TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brox/var/greenbayupoc: Update verb table from ALC256 to ALC236Wu Garen
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256) Update to Realtek provided verb table for ALC236 audio codec. BUG=b:336967284 TEST=Verified headset and audio workable on DUT with "rec" and "aplay" command. Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413 Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Add vbt from broxEren Peng
Copy the data.vbt from brox to greenbayupoc BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Update devicetree and gpio settingsEren Peng
Based on latest schematics GREENBAY_0412.SCH update the gpio and devicetree settings. BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Cq-Depend:chrome-internal:7218819 Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455 Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-13mb/google/brox: Disable c1 state auto-demotionAshish Kumar Mishra
Disable c1 state auto-demotion support for brox BUG=None BRANCH=None TEST=Boot brox and verify in fsp debug logs Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-12mb/google/brox/var/greenbayupoc: Configure board for SODIMM useEren Peng
Configure SODIMM settings for greenbayupoc. The SODIMM settings are copied from mainboard/google/brya/variants/baseboard/brask/memory.c. BUG=b:336955026, b:332230842 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot to OS using Hynix HMAG56EXNSA051N 4G and Micron MTA8AFT1G64HZ-3G2R1 8G SODIMM. Change-Id: I1552cadfa81c48fe561947ded078bcca2e6bc6ad Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82085 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-09mb/google/brox: Sending End of Post (EOP) asynchronouslyKarthikeyan Ramasubramanian
Currently EOP message is sent to CSE late in the boot flow. Instead send it asynchronously to save ~10 ms in boot time. BUG=b:337330958 TEST=Build Brox BIOS Image and boot to OS. Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-08mb/google/brox: Fix the pad reset config for WLAN Wake interruptKarthikeyan Ramasubramanian
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and wakeup successfully using Wake on WLAN. 268 | 2024-05-07 13:56:44-0700 | S0ix Enter 269 | 2024-05-07 13:57:07-0700 | S0ix Exit 270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3 271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3 273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0 274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3 275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3 Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-08mb/google/brox/var/brox: increase PsysPmax from 21.5W to 208WLawrence Chang
According to Brox HW design, the PsysPmax is supposed to be 208W. This patch changes PsysPmax setting from 21.5W to 208W. Change-Id: I43f4b00a54dc0dfe6bd690492f9ef92698c9b903 Signed-off-by: Lawrence Chang <lawrence.chang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-05-06mb/google/brox:Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATIONKrishna Prasad Bhat
Brox uses PDC<->PMC direct connection for USBC mux configuration. Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it. This patch also adds additional dependency on ENABLE_TCSS_USB_DETECTION to be selected only when PDC<->PMC direct connection and CHROMEOS is not used. BUG=b:332383540 TEST=USB3 plugged during G3, is detected after system boots from G3. Cq-Depend: chromium:5484387 Cq-Depend: chrome-internal:7106592 Change-Id: I0f62943f87d8fb6eb494c0aca3ef08c33cd05ffd Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-30soc/intel/alderlake: Default to 512 for DIMM_SPD_SIZEFelix Singer
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total SPD size of 512 bytes. Set this as the default and remove the setting from mainboard Kconfigs. Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30mb/google/brox: Add 20K pulldown to GPP_D14Shelley Chen
GPP_D14 is floating when ISH is not being used and wasting power. Add pulldown to prevent this from happening. BUG=b:336654954 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage make sure OS boots up HW team validated that power usage is 20 mW lower Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-29mb/google/brox: Fix the pad reset config for Touchpad interruptKarthikeyan Ramasubramanian
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup using Trackpad. 246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3 247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3 248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67 249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3 250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3 251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67 Also suspend to S0ix and wakeup using Trackpad. Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-25mb/google/brox/var/lotso: Add fw_config field for storagetongjian
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333494257 TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage Change-Id: Idb62e3f37e1480979ae529692455beb533434520 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-19mb/google/brox/variants/lotso: add missing hda_verb.hFelix Held
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir") introduces a variant-specific file for the HDA verb tables, which commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing which caused the build to fail when both patches were submitted. To fix the tree, add this file to the newly created lotso variant. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-19mb/google/brox: Create lotso variantKun Liu
Create the lotso variant of the brox reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:333494257 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_LOTSO Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-19mb/google/brox: Move hda verb to variant dirtongjian
Others variant boards might use diff HDA Codec, so move hda verb to brox variant dir. BUG=b:314702466 BRANCH=None TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC256 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: evtest 8 Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1713404716.656768, -------------- SYN_REPORT ------------ Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1713404722.802661, -------------- SYN_REPORT ------------ Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945 Reviewed-by: Poornima Tom <poornima.tom@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 14:12:55 +0000