aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/asrock
AgeCommit message (Collapse)Author
2023-10-25mb/asrock/h110m/devicetree: Use comma separated list for arraysFelix Singer
In order to improve the readability of the settings, use a comma separated list to assign values to their indexes instead of repeating the option name for each index. Don't convert the settings for PCIe root ports as they should stay in the devicetree at their related root ports. Change-Id: I25b87a157e934640355442edceb0760827dc7a43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78591 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-25devicetrees: Remove trailing backslash from multiline valuesFelix Singer
It's not needed to put a backslash at the end of a line for quoted multiline values. Thus, remove it. Change-Id: I1b83d53598ba2adeed853a96d6c2c1a21f01a9f7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78576 Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-09-29mb/asrock/b75m-itx: Order Kconfig selects alphabeticallyFelix Singer
Change-Id: I28a90c236e17d1ea15f5416fab8be7360494e92e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-08mb/asrock/b75pro3-m: Drop destructive GPIO settingsFabian Groffen
Without setting these GPIO bits, you /can/ power on your board after powering it down again. This includes after cutting the power. The only way to recover from this is to pull the CMOS battery and cut the power for 15mins. Then make sure you don't do this GPIO trickery or you end up with the same state of basically an unresponsive "dead" mainboard. So flash the chip before you pull the battery. One small workaround I found when you like to flash from the system, is to press the power button with 1 second after you enable power to the board. In this small timeframe, apparently the superio chip didn't intialise/restore/gets set with the settings that make it never want to power on again. The other workaround is to connect the appriopriate pins on the ATX power connector to force power to the mainboard. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I4c9df200ba3ec5f315ad3d184588551d29fa68ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/75212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-03-30mb/asrock/h77pro4-m: Make onboard NIC a child device below PCIe port 6Kevin Keijzer
The Realtek RTL8111E NIC is currently not defined as a child device, resulting in the on_board flag not being set to 1. This means that Linux / udev will call the device enp4s0 rather than eno0, as is appropriate for on-board ethernet devices. This patch defines the NIC as a child device of PCIe port 6, so that it's properly defined as an on-board device. Change-Id: I2e1b65e4d27852297a739e332c52c15a8c81b858 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74090 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-25mb/asrock/b75pro3-m: Remove cpu_fan_tach_src from CMOS layoutFabian Groffen
Commit 65c456227e1 (mb/asrock/b75pro3-m: Add CMOS layout/defaults and vbt.bin) introduced CMOS settings for selecting CPU_FAN{1,2}, but this code was never implemented. Remove the fake setting for it. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ic2f4aa42f9cfd77defc2a11e16643690356bc26b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-23mb/asrock/b75m-itx: Set HDA pin configuration like vendor BIOSKevin Keijzer
While doing the initial port of this board, hda_verb.c was mainly put together by guesswork and borrowing the pinouts from similar boards. While it was mostly correct, not everything was tested properly. This change takes the values of vendor BIOS version P1.80, obtained by running `cat /sys/class/sound/hwC0D0/init_pin_configs` while booted from the vendor firmware. 7.1 channel audio and front panel audio are now also tested. Change-Id: I60b0f55c203f42b220f13cf943912f7428476792 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73935 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Fabian Groffen <grobian@gentoo.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-23mb/asrock/b75m-itx: Move subsystemid from NIC to PCIe root port 4Kevin Keijzer
As a follow-up to commit 1a591d0c4460 (mb/asrock/b75m-itx: Make NIC a child device below PCIe port 4), this change corrects the subsystemid being incorrectly applied to the Realtek NIC instead of the PCIe root port. Change-Id: Ib6fb8bf808132c008846d8ca9acde0eef277765c Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-23mb/asrock/b75m-itx: Remove cpu_fan_tach_src from CMOS layoutKevin Keijzer
This board inherited cmos.default and cmos.layout from asrock/h77pro4-m, which has two CPU fan headers and a CMOS option to select which one will provide the tachometer source. However, the code for this was never implemented. Moreover, this board only has one CPU fan header, rendering the option useless. This change removes the option from cmos.layout and cmos.default. Change-Id: Ib4580e243781e2340af2cefb825f26ee896c2bd3 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73931 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-21mb/asrock/b75m-itx/devicetree.cb: Fix errors for PNP 2e.b and 2e.308Kevin Keijzer
Currently, cbmem shows five errors when running `cbmem -c -B +ERROR`: Resource didn't fit!!! PNP: 002e.308 60 * size: 0x8 limit: fff io Resource didn't fit!!! PNP: 002e.b 62 * size: 0x2 limit: fff io PNP: 002e.b 62 io size: 0x0000000002 not assigned in devicetree PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree PNP: 002e.308 60 io size: 0x0000000008 not assigned in devicetree These changes resolve all the warnings by setting proper io and irq values. Change-Id: I5f669e2a1bd1338010a5d801a1d2a48ae11b3c89 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73815 Reviewed-by: Fabian Groffen <grobian@gentoo.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-03-21mb/asrock/b75m-itx: Disable unused ME KT PCI deviceFabian Groffen
Resolve this message: [INFO ] PCI: Static device PCI: 00:16.3 not found, disabling it. The ME KT is very unlikely to exist on a consumer device as it is only used in combination with Intel AMT. AMT comes only with the corporate ME variant, whilst this mainboard is consumer grade. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I15dd586db9cb4b2dd615b7bf78665df86a32cb9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73829 Reviewed-by: Kevin Keijzer <kevin@quietlife.nl> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-20mb/asrock/b75pro3-m/devicetree.cb: Fix errors for PNP 2e.308Fabian Groffen
[ERROR] PNP: 002e.308 60 io size: 0x0000000008 not assigned in devicetree [ERROR] ERROR: Resource didn't fit!!! PNP: 002e.308 60 * size: 0x8 limit: fff io Configure GPIO pins like asrock/h77pro4-m, this resolves the error and makes CPU-fan readings work. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: If717d046d9f60ca66d1e33db59ad67d23c393376 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-20mb/asrock/b75pro3-m/devicetree.cb: Silence errors for PNP 2e.bFabian Groffen
[ERROR] PNP: 002e.b 62 io size: 0x0000000002 not assigned in devicetree [ERROR] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree Set them to zero. This is also what the values are set to using vendor firmware 1.90. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ide5980224f042e3da289aa28a18042ee8505d943 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73812 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-20mb/asrock/b75pro3-m: Disable unused ME KT PCI deviceFabian Groffen
Resolve this message: [INFO ] PCI: Static device PCI: 00:16.3 not found, disabling it. The ME KT is very unlikely to exist on a consumer device as it is only used in combination with Intel AMT. AMT comes only with the corporate ME variant, whilst this mainboard is consumer grade. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ie1f0bad276f5c124d8d52772330982bf1342c72e Reviewed-on: https://review.coreboot.org/c/coreboot/+/73811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-18mb/asrock/h77pro4-m: Use VBT provided by Linux' debugfsMichael Büchler
The current VBT causes problems with Windows 10. Once the Intel driver is used instead of the generic graphics driver, the display turns off although the system keeps running normally. Linux has no issues. It had been extracted from the vendor video BIOS, which in turn had been extracted from the vendor firmware. This change replaces the VBT with one that was dumped through debugfs and the drm/i915 driver in Linux, booted from the vendor firmware at version 2.10 (beta). It fixes the issue with the Intel graphics driver on Windows 10. Change-Id: Icbb3950b37dad5ed308f3bafb73b71859227d26b Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73711 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09mb/asrock/b75pro3-m: Advertise RTL NIC as onboard ethernet deviceFabian Groffen
Move the onboard Realtek NIC definition to a child device of PCIe port 6. This makes sure it is advertised as "onboard", such that it appears as eno0 on systemd/udev-based systems. This commit is very similar to https://review.coreboot.org/c/coreboot/+/73516 Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-08mb/asrock/b75m-itx: Make NIC a child device below PCIe port 4Kevin Keijzer
The Realtek RTL8111E NIC is currently not defined as a child device, resulting in the on_board flag not being set to 1. This means that Linux / udev will call the device enp3s0 rather than eno0, as is appropriate for on-board ethernet devices. Additionally, the comment in devicetree.cb stating that PCIe port 6 is the ethernet controller is incorrect. It's actually port 4. This patch moves the comment to the right port, and defines the NIC as a child device of said port, so that it's properly defined as an on-board device. Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/TFWNW3Y7IWTFD4KIBVNQYW3DODJ6SSC2/ Change-Id: Ie1e3a757a6bd6c7dd1702ced177d13711978dcc4 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73516 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Fabian Groffen <grobian@gentoo.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-06mb/asrock/b75m-itx: Add Sandy/Ivy Bridge board B75M-ITXFabian Groffen
This board is based off b75pro3-m, which is very similar. Compared to it, it just lacks a COM1 header, and the secondary ASMedia SATA3 controller. Tested with: CPUs: - Core i5-3330 - Core i5-3470 - Core i7-3770 RAM: - single bank 4GB CL11 - two banks 4+4GB CL9 - two banks 8+8GB CL10 OS: - Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72) Working: - GRUB2 payload with embedded default config for boot from USB, disk - UEFI EDK2 payload - Intel ME stripped - Native raminit - Integrated graphics with libgfxinit (HDMI, DVI and VGA) - (boot from) SATA2, SATA3, ports - Rear USB 2 and 3 ports (supports boot) - Internal USB 3.0 ports - Realtek GbE NIC - 2.0 channel audio via lineout jack output - ACPI (power button triggers OS event) Untested: - Internal USB 2.0 ports - eSATA port - 7.1 channel audio Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ia6a6eb3e922920f4afbcb7828cd2b779b9caebcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73097 Reviewed-by: Kevin Keijzer Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-05mb/asrock/b75pro3-m: Add CMOS layout/defaults and vbt.binKevin Keijzer
The ASRock B75 Pro3-M port was lacking a cmos.default and cmos.layout, which means nvramtool could not be used to change any nvram values, and the defaults were always being used. I have "borrowed" the files from the similar h77pro4-m port, which work fine for the b75pro3-m. I can now adjust things like gfx_uma_size and power_on_after_fail, which are quite useful to be able to modify. Additionally, this board did not have a data.vbt, so I extracted vbt.bin from the VGABIOS and added it. Change-Id: I40822f2f7b013b7ac0658d66d7972b447066d593 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73451 Reviewed-by: Fabian Groffen <grobian@gentoo.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-05mb/asrock/b75pro3-m: Fix S3 resume and hardware monitoringKevin Keijzer
On the ASRock B75 Pro3-M, resuming from S3 has always been broken; see commit 928c6c6336f2 (mainboard/asrock: add ASRock B75 Pro3-M). This was because 3VSBSW# was not enabled during S3, causing the board to reboot instead of resume. This change enables 3VSBSW# during S3, which leads to S3 resume working normally. Another issue with this board was that hardware monitoring was not working. The nct6775 Linux kernel module could not be loaded, due to the device having a base I/O port of 0. This change also enables the Super I/O properly, so that sensors-detect can find the sensor and the kernel module can be used. Change-Id: I6e504fe4b60da1d7b9830bea5029101bb8cebcb5 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73450 Reviewed-by: Fabian Groffen <grobian@gentoo.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-15mb/asrock/b75pro3-m: Reorder Kconfig selects alphabeticallyFelix Singer
Built asrock/b75pro3-m with BUILD_TIMELESS=1 and coreboot.rom remains the same. Change-Id: I8db6b870f2d4aac35766717866b519921d270f9e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-07tree: Drop repeated wordsAlexander Goncharov
Found-by: linter Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b Signed-off-by: Alexander Goncharov <chat@joursoir.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-04mb/*: Replace SNB PCI devices with references from chipset.cbArthur Heymans
Removing default on/off from mainboard devicetrees is left as a follow-up. Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-25mainboard: Drop invalid `hyper_threading` optionAngel Pons
Drop the `hyper_threading` CMOS option from most boards, as it's most likely not working properly and causing problems. The main reasons to remove the option are: * The used enum is backwards (0 ---> Enable, 1 ---> Disable) * Platform/SoC code does not honor the `hyper_threading` option Also, remove the now-unused enum used by the `hyper_threading` option. Change-Id: Ia8980a951f4751bc2e1a5d0e88835f578259b256 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69523 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-12-05nb/intel/x4x: Remove apic 0 from devicetreeArthur Heymans
This is added at runtime. Change-Id: I7716f8a972e2280179aa6aee00488b22413c0c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69298 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-05cpu/intel/speedstep: Have nb and sb code provide c5/c6/slfmArthur Heymans
C5, C6 and slfm depend on the southbridge and the northbridge to be able to provide this functionality, with some just lacking the possibility to do so. Move the devicetree configuration to the southbridge. This removes the need for a magic lapic in the devicetree. Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-12-02sb/intel/i82801gx: Use boolean for ide_enable_{primary,secondary}Elyes Haouas
Change-Id: Ia71692ecf74fd8921eeafabac9a4cb862da90e81 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70114 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-12-01nb/intel/x4x: Hook up PCI domain and CPU bus ops to devicetreeArthur Heymans
Change-Id: I0a7b3167392c152da6459dfc202ef11b2e61400a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69295 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-30nb/intel/sandybridge: Add a chipset devicetreeArthur Heymans
This only moves CPU configuration to a common place. Other PCI devices can be done in follow-ups. Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-25cpu/intel/haswell: Move chip_ops to cpu clusterArthur Heymans
The cpu cluster is always present and it's the proper device to contain the settings that need to be applied to all cpus. This makes it possible to remove the fake lapic from devicetrees. Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-11-18Makefile.inc: Remove workaround ACPI warningsArthur Heymans
No boards now have a missing dependency so remove the workaround. Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-09nb/intel/haswell: Hook up PCI domain and CPU cluster ops to devicetreeArthur Heymans
Change-Id: I955274bc6bda587201f130762c0735c36f5501d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69289 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-07mb/*/*: Remove AMD agesa family16 boardsArthur Heymans
These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I43c7075fb6418a86c57c863edccbcb750f8ed402 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-07mb/*/*: Remove AMD family14 boardsArthur Heymans
These boards use the LEGACY_SMP_INIT which is to be deprecated after release 4.18. Change-Id: I3495d140a244bbbf63e846fcd963d69907e09719 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-12mb/asrock/*/irq_tables.c: Use ALIGN_UP macroElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I38ea4e9bf0d8e2d93b86413cd9b1a2fb0a547e1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
It is highly unlikely that the "OEM revision" of the DSDT is 0x20110725 on mainboards with a chipset not yet released on 2011-07-25. Since this comment is most likely to have been copy-pasted from other boards, drop it from boards which use a chipset newer than Sandy/Ivy Bridge. Change-Id: If2f61d09082806b461878a76b286204ae56bf0eb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2022-08-13src/mb: Update unlicensable files with the CC-PDDC SPDX IDMartin Roth
These files contain no creative content, and therefore have no copyright. This effectively means that they are in the public domain. This commit updates the unlicensable empty (and effectively empty) files with the CC-PDDX identifier for license compliance scanning. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: I0b76921a32e482b6aed154dddaba368f29ac2207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66497 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-30mb/asrock/h81m-hds: Reorder selects alphabeticallyFelix Singer
Change-Id: I18398efefcb4171496c39462c23514ad61659213 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-30mb/asrock/b85m_pro4: Reorder selects alphabeticallyFelix Singer
Change-Id: Ic22fcbb7923ecac4c70147ae642ac28fac3e6e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-25mb/*/BiosCallOuts.c: Fix unused variableArthur Heymans
This fixes clang builds. Change-Id: Ie09fae149a9530ad45f0cd5945e73f46484ef385 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-01-28IASL: Ignore IASL's "Missing dependency" warningElyes HAOUAS
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects: 1) If _PRS is present, must have _CRS and _SRS 2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS) 3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS) 4) If _SRS is present, probably should have a _DIS (Remark only) IASL will issue a warning for each missing dependency. Ignore this warnings for existing ASL code and issue a message when the build is complete. Change-Id: I28b437194f08232727623009372327fec15215dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-16soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. 3. Make dt CSE PCI device `on` by default. 4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1 function disable at pre-boot instead of the dt policy that uses `HeciEnabled = 0`. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-10src/mainboard/{asrock,asus}: Remove unused <console/console.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<" Change-Id: I5c4facdafb3d1ccb894a67acbf9aedb9c2f0ac6a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-04sb/intel: Use `bool` for PCIe coalescing optionAngel Pons
Retype the `pcie_port_coalesce` devicetree options and related variables to better reflect their bivalue (boolean) nature. Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-01src: Use 'stdint.h' when appropriateElyes HAOUAS
Change-Id: I1df255d55b8f43a711d836c2565c367bd988098a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-23mb/asrock: Add ASRock H77 Pro4-M mainboardMichael Büchler
This adds a new port for the ASRock H77 Pro4-M motherboard. It is microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3 SDRAM. The port was initially done with autoport. It is quite similar to the ASRock B75 Pro3-M which is already supported by coreboot. Working: - Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120) - Native RAM initialization with four DIMMs of two different types - PS/2 combined port (mouse or keyboard) - Integrated GPU by libgfxinit on all monitor ports (DVI-D, HDMI, D-Sub) - PCIe graphics in the PEG slot - All three additional PCIe slots - All rear and internal USB2 ports - All rear and internal USB3 ports with reasonable transfer rates - All six SATA ports from the PCH (two 6 Gb/s, four 3 Gb/s) - All two SATA ports from the ASM1061 PCIe-to-SATA bridge (6 Gb/s) - Rear eSATA connector (multiplexed with one ASM1061 port) - Console output on the serial port of the Super I/O - SeaBIOS 1.15.0 to boot slackware64 - SeaBIOS 1.15.0 to boot Windows 10 (needs VGA BIOS) - Internal flashing with flashrom-1.2 (needs `--ifd -i bios --noverify-all`) - External flashing with flashrom-1.2 and a Raspberry Pi 1 - S3 suspend/resume from either Linux or Windows 10 Not working: - Booting from the two SATA ports provided by the ASM1061 - Automatic fan control with the NCT6776D Super I/O Untested: - VBT (it is included, though) - Infrared header Change-Id: Ic2c51bf7babd9dfcbaf69a5019b2a034762052f2 Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-19mainboard: Fix comment about early GPIOsAngel Pons
These boards program the early GPIO table in bootblock, not romstage. Change-Id: Iae9353d106483f30cefa2d035d96e63e4c127261 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Sean Rhodes <admin@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-22AGESA binaryPI: Use common acpi_fill_madt()Kyösti Mälkki
Change-Id: I01ee0ba99eca6ad4c01848ab133166f8c922684d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-19cpu/intel/speedstep: Constify `get_cst_entries()`Angel Pons
Make the `get_cst_entries()` function provide a read-only pointer. Also, constify the actual data where applicable. Change-Id: Ib22b3e37b086a95af770465a45222e9b84202e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-17soc/intel/skylake: switch to common GNVSMichael Niewöhner
Switch to common GNVS. No additional fields to those being present in common GNVS are used by any SKL/KBL device. Thus, they're dropped completely. Change-Id: I87ab4ab05f6c081697801276a744d49e9e1908e0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-10-17Skylake boards: Drop setting useless `IRQ_SLOT_COUNT`Angel Pons
The `IRQ_SLOT_COUNT` value is only meaningful when generating a PIRQ table. None of these boards do it, so specifying this value achieves absolutely nothing. Drop it to prevent further useless copy-pasting. Change-Id: I2d63b850c03fc1471c0eef180e8b621311b2c336 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-17skylake DDR4 boards: Set `CaVrefConfig` to 2Angel Pons
The `CaVrefConfig` FSP-M UPD describes how the on-die Vref generators are connected to the DRAM. With the exception of an early Skylake RVP board (which doesn't have coreboot support), mainboards using DDR3 or LPDDR3 memory should set `CaVrefConfig` to 0, whereas mainboards with DDR4 should set `CaVrefConfig` to 2. MRC uses this information during memory training, so it is important to use the correct value to avoid any issues, such as increased power usage, system instability or even boot failures. However, several Skylake DDR4 mainboards don't set `CaVrefConfig` to 2. Although they can boot successfully, it's not optimal. For boards that set `DIMM_SPD_SIZE` to 512 (DDR4 SPD size), set `CaVrefConfig` to 2. Change-Id: Idab77daff311584b3e3061e9bf107c2fc1b7bdf1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-07mb/asrock/e350m1: Enable USB on mPCIeSebastian 'Swift Geek' Grzywna
Verified by running following on vendor and observing mPCIe USB device (dis)appearing: echo 1 > /sys/bus/pci/devices/0000:00:16.0/remove echo 1 > /sys/bus/pci/devices/0000:00:16.2/remove echo 1 > /sys/bus/pci/devices/0000:00:00.0/rescan Change-Id: I6ee7e3679c9cd87b81f955c68ec89db1dda30aec Signed-off-by: Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-03skylake: Default to `BOARD_TYPE_DESKTOP` for PCH-HAngel Pons
Set the `UserBd` FSP-M UPD to `BOARD_TYPE_DESKTOP` by default on PCH-H. Remove now-redundant mainboard code to set the `UserBd` UPD. Change-Id: I349abe5d89f562c158ce9baadbca2b2f56695846 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57261 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
Specify the type of the `DIMM_SPD_SIZE` Kconfig symbol once. Change-Id: I619833dbce6d2dbe414ed9b37f43196b4b52730e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
Specify the type of the `DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If68f11a5ceaa67a3e8218f89e1138c247ebb9a25 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56555 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device domain 0x0 on`Angel Pons
Most boards use `device domain 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I6e2f0a19d57cfe6fc4e4ac4d14310133ad6b01d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Use decimal for `device cpu_cluster 0x0 on`Angel Pons
Most boards use `device cpu_cluster 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I083c8f8e9b38ddcc217dc8bf17ae3c9473ba77e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-05-18mainboard: Drop useless `acpi_tables.c` filesAngel Pons
The `tcrt` and `tpsv` values in GNVS can be used to implement thermal management in ACPI. However, not all mainboards use these values. On mainboards where `tcrt` and `tpsv` are not used in ACPI tables and are the only values set in the `mainboard_fill_gnvs` function, remove them as well as the entire `acpi_tables.c` file. Most files come from autoport, which unconditionally generates this file. Change-Id: If2315ddd9700e2da0a24ffecc20acb5c1a1d688e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-10AGESA boards: Drop comments about `IDS_DEBUG_PORT`Angel Pons
No board defines this macro. In preparation to drop OptionsIds.h files from mainboards, remove commented-out references to `IDS_DEBUG_PORT`. Change-Id: I67a10d863aeea9e1b91c38aa02d19106b7b97659 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_SIMNOW` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Ibc2876a5a8419ec4fa5a793bb996f5c14d989bac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_HOST_HDT` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: I9cd9fa0dc25b1143f8b4c1f20beffba638437398 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-10AGESA boards: Drop unused `IDSOPT_DEBUG_ENABLED` macroAngel Pons
This macro is not used anywhere in AGESA. Remove all references. Change-Id: Icae0ecae77a20e1568440e3191a29db33b5581d8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-05-07skylake DT/HALO mainboards: Drop `SaGv` settingAngel Pons
SaGv is only supported on ULT/ULX hardware. Change-Id: I25001e97cce3193629e7fa7573bf9b352362d59b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-05-04mb/*/Kconfig: Drop select USE_OPTION_TABLEPatrick Rudolph
Only 4 mainboards selected to use the option table. Use the same default on all boards. Change-Id: Ia9ef88d5158a2b43f843c26b5b366a899dad8788 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-26mb/**/cmos.layout: Drop unreferenced `iommu` optionAngel Pons
No code in coreboot uses this option, so it might as well be dropped. Change-Id: Ie58bab7e87831db08b9f398a777ba350920b707b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52639 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26mainboard: Drop unreferenced CMOS optionsAngel Pons
Remove CMOS options that are not read anywhere in the code. They may have been used in the native AMD platform code, or got copied around from board to board and never did anything to begin with. Change-Id: Ib19ace4fa6e610a28e68fe2612b4e623f200f064 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52638 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-20mb/asrock/h110m: Choose `CHIPSET_LOCKDOWN_COREBOOT`Angel Pons
The `chipset_lockdown` option defaults to `CHIPSET_LOCKDOWN_FSP` if omitted. As most of the mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, choose it here as well for consistency. Change-Id: I5ef61f3d931abdb740411d8c58048cf21185802c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2021-03-25nb/intel/haswell: Decouple mainboard USB config from MRCAngel Pons
With this change, only raminit.c uses pei_data.h definitions. With MRC cornered, making it optional is just a matter of writing a replacement. USB config definitions will be moved to Lynx Point code in a follow-up. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4bc405213e9b0828d9ced18677335533c7dd381d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-23haswell boards: Use zero length for disabled USB portsAngel Pons
For disabled USB ports, the length setting does not matter. In future commits, disabled USB ports will end up with length field set to zero. Change-Id: I7613e1b0c89c0b58eca790ca14fcd1633c8a93af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-03-23nb/intel/haswell: Use unshifted SPD addresses in mainboardsAngel Pons
It's common to use the raw, unshifted I2C address in coreboot. Adapt mainboards accordingly and perform the shift in MRC glue code. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: I4e4978772744ea27f4c5a88def60a8ded66520e1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51458 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-19nb/intel/haswell: Consolidate memory-down SPD handlingAngel Pons
Mainboards do not need to know about `pei_data` to tell northbridge code where to find the SPD data. Adjust `mb_get_spd_map` to take a pointer to a struct instead of an array, and update all the mainboards accordingly. Currently, the only board with memory-down in the tree is google/slippy. Mainboard code now obtains the SPD index in `mb_get_spd_map` and adjusts the channel population accordingly. Then, northbridge code reads the SPD file and uses the index that was read in `mb_get_spd_map`, and copies it to channel 0 slot 0 unconditionally. MRC only uses the first position of the `spd_data` array, and ignores the other positions. In coreboot code, `setup_sdram_meminfo` uses the data of each SPD index, so `copy_spd` has to account for this. Tested on Asrock B85M Pro4, still boots and still resumes from S3. Change-Id: Ibaed5c6de9853db6abd08f53bbfda8800d207c3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51448 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16AGESA,binaryPI boards: Drop invalid MP table filesKyösti Mälkki
If we spot any error in the file, treat it as untested and broken copy-paste. Change-Id: Idd13b8b006fce7383f3f73c3c0a5d51a71c0155b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38313 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-16AGESA,binaryPI boards: Move IRQ table programmingKyösti Mälkki
IRQ programming should be done outside (obsolete) MP table generation. Change-Id: Ibce2af4de91549c4c9743cd997f625164672a713 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38564 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03AGESA boards: Captilize ASL namesPaul Menzel
ASL+ Optimizing Compiler/Disassembler version 20200925 remarks: IASL build/dsdt.aml Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20200925 Copyright (c) 2000 - 2020 Intel Corporation dsdt.asl 222: Name(PSa, Package(){ Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (PSA_) dsdt.asl 228: Name(APSa, Package(){ Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (APSA) Execute the command below to fix all occurences: git grep -l PSa | xargs sed -i 's/PSa/PSA/g' Change-Id: Ia458c98a4774fb5745825aecf996a476e66eaa3f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-01mb/: Drop print of MAINBOARD_PART_NUMBERKyösti Mälkki
Change-Id: Ie3870bc666acaea316f00b205de512cf790e720c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-20AGESA fam14 boards: Drop _SI scope with _SST in ASLKyösti Mälkki
Change-Id: Ieb2f7a6b2721ddeef6945c3e0a0f4cc5627dd533 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA,binaryPI boards: Drop _SI scope with _SST in ASLKyösti Mälkki
Change-Id: I0fca35753c93ba928a0f67bb68a6cfdc26c0e756 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA,binaryPI boards: Move common PCBA in ASLKyösti Mälkki
Change-Id: I9d502882c4ddb54af1da42a41591804da2cee0ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA,binaryPI boards: Drop unused variables in ASLKyösti Mälkki
Change-Id: I1d1323ab8bb8565c05fd50697e29c61f9932a2c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20AGESA fam14 boards: Move include for usb_oc.aslKyösti Mälkki
Do this for consistency with later platforms. Change-Id: Ia4903b40a8f617c59868aaa116115fa23603438c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-20sb,soc/amd: Drop OSFL method in ASLKyösti Mälkki
Variable OSVR had a static value of 3 and OSFL() did not actually call _OSI or _OS methods. The conditional in HDA _INI method of OSVR is dropped and use of DMA NoSnoop attribute remains disabled to retain previous behaviour. For soc/amd/picasso a different decision was made in CB:40782 as HDA _INI method was just dropped and default configuration enables use of DMA NoSnoop attribute. Change-Id: I967b7b2afbb43253cccb4b77f6c44db45e2989e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14sb/amd/cimx/sb800: Move common OSFL method in ASLKyösti Mälkki
We deal with mb/lippert/frontrunner-af later since it currently does not include <cimx/sb800/acpi/fch.asl>. Change-Id: I30b611fc1fb01777223d7222adc96308a247a35c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50591 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-14AGESA,binaryPI boards: Drop OSV in ASLKyösti Mälkki
Not referenced anywhere in ASL. Change-Id: I52ac4722e48e1cc377386316dc034fb45a98181a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50471 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell boards: Correct USB config indentationAngel Pons
Change-Id: I72b717a41c5611cf578ce178722029b8646cbb35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50539 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12haswell: Drop `mainboard_fill_pei_data`Angel Pons
Use global variables to provide mainboard USB settings, and have the northbridge code copy it into the `pei_data` struct. For now. To minimize diffstat noise, this patch does not reindent the now-global mainboard USB configuration arrays. This is cleaned up in a follow-up. Change-Id: I273c7a6cd46734ae25b95fc11b5e188d63cac32e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50538 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-12mainboard: Drop unneeded `default_brightness_levels.asl`Angel Pons
Desktop boards do not have any backlight control. Change-Id: Ie9f5f4d7e6ae09b3d664d53e4c03157fd4ed088e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-12my boards: Do not include `superio.asl` twiceAngel Pons
The southbridge ASL already includes this file. Change-Id: I492d4c860a50ac98acbcb3a51fa4d47c94baade3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-11ACPI: Move PICM declarationKyösti Mälkki
Variable PICM was not inside GNVS region and can use a static initialisation value. For most AMD platforms PICM default changes from 1 to 0. Fix comments about PICM==0 used to indicate use of i8259 PIC for interrupt delivery. Change-Id: I525ef8353514ec32941c4d0c37cab38aa320cb20 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49905 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 11:41:04 +0000