Age | Commit message (Collapse) | Author |
|
Add early configuration of the GPIOs that control the M2 SSD resets.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I81439d193bdd7296d8a8fea83c5c6be2c75adbea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73989
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add option decode for USB-C DDI connection type and remove unnecessary
break after return.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If38fa667daeb2dd176ecdf33abaec9b56d633a2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Birman requires 4-byte addressing for flash.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id732129cfc14bb47e8f3d7f3de479815e040ea16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move EC FW from a CBFS file to an FMAP entry and rename the EC signature
section to EC_SIG.
An offset of (16M - 512K) was chosen to line up the EC FW before the
RW_MRC_CACHE.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9b19d92043790b10acd20fbfdf394d5bd67b8295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in
the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but
both mb/google/kahlee and the other amd mainboards using newer SoCs set
both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to
match the other mainboards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SimNow does not support the Birman EC, so skip the EC configuration
steps when building for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia7e594ca2b6ea3cd9d6f60e7dcd1ba6ebabf85cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
When the flash size is over 16M, the absolute address could be lager
than 16M, which can not be taken by CBFS. For the relative address, it
is more flexible.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
TEST=binary identical test on birman and mayan when
CONFIG_BIRMAN_HAVE_MCHP_FW and CONFIG_MAYAN_HAVE_MCHP_FW are set as
y.
Change-Id: I65be3039cd3449bfb481ad87281b72e88a58bd45
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Use the common missing APCB warning when the APCB is missing
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie6303bc3457731bcac322770c4c08712f89fce3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move missing APCB warning from birman to amd/common so that other
mainboards can utilize the same warnings if the APCB is missing.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7ae689726ae4f7ccdf6959e47cbb5aee15cdb690
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ifbc1814fbc123752bdc96f1f72344ed0333fae2e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
APOB on Phoenix is larger, so expand the reserved DRAM and MRC_CACHE
regions to fit. This requires moving memory addresses around to prevent
overlapping memory linker errors.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42af7230ca5f09ba66b2b3c4f99ac3feac7feeea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Glinda and Phoenix have different requirements, so split the birman FMD
files to better apply to each SoC.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia2dbaeb8af04fb1d1224c397d728929c50800dfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3919fba40f22ee84b0a3eee1ac7b6e48c076d713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I15e29443d2735342a5a43339f5bb095e5115349c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move the missing APCB warning to the end of the build and make it stand
out better. Prior to this patch, the warning would appear as one of the
first build messages and easily be missed due to the rest of the build
messages.
TEST=build with and without proper APCBs being found, warning message
appears only when APCB is not found and stands out more
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iabe32636b8e31fe781519533a329a08535bd661a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
update EC FW offset location in spirom to 0x81000
For mayan board EC FW is located at offset 0x81000 location,
0th location contains pointer to this EC FW location.
Change-Id: I63c797e12ed131e8411c11379f4db9bcc29b49a2
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Not exactly sure about the usb4_xhci controllers, but for now I assume
those will behave like any other XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22384f58e245a1486793831d29d22e9c618f646c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The PCI Device ID Assignments table from PPRs #57019 Rev 1.65 and
PPR #57396 Rev 1.54 were used as a reference. Some devices will need to
have ops added in future patches. Since the xhci_2 device isn't there
any more, also drop it from the mainboard devicetrees. The actual USB
port configuration on xhci_0 and xhci_1 is updated in the next patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49721bc44fa1e2a0118a8c3ac79a36aee64be687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Now that the PCIe ports on device 1 are added, rename the aliases for
the PCIe ports on device 2 to have a common naming scheme. For phoenix
the device alias names are based on the device and function number the
bridge is connected to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f5698408019bb9222b599dd78540ca1b187b56d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72737
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<gpio.h> chain-include <soc/gpio.h>.
Change-Id: I48191064fcee53ca843a537aa36bdbbd57736bf2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The mp2 PCI device is still present when no mp2 firmware is loaded. When
this device isn't explicitly enabled in the mainboard's devicetree, the
chipset devicetree default of the device being disabled is used. This
results in coreboot's resource allocator not allocating resources to the
device and since the bridge doesn't have enough MMIO space reserved, the
Linux kernel can't assign resources to it. To fix this problem, enable
the mp2 device in the mainboard's devicetree so that it gets its
resources assigned by coreboot.
TEST=Fixes the resource allocation for the mp2 PCI device.
dmesg output before the patch:
[ 0.210616] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000
[ 0.210631] pci 0000:04:00.7: reg 0x18: [mem 0x00000000-0x000fffff]
[ 0.210641] pci 0000:04:00.7: reg 0x24: [mem 0x00000000-0x00001fff]
[ 0.210649] pci 0000:04:00.7: enabling Extended Tags
[ 0.240570] pci 0000:04:00.7: BAR 2: no space for [mem size 0x00100000]
[ 0.240572] pci 0000:04:00.7: BAR 2: failed to assign [mem size 0x00100000]
[ 0.240574] pci 0000:04:00.7: BAR 5: assigned [mem 0xd05c6000-0xd05c7fff]
dmesg output after the patch:
[ 0.210483] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000
[ 0.210501] pci 0000:04:00.7: reg 0x18: [mem 0xd0500000-0xd05fffff]
[ 0.210515] pci 0000:04:00.7: reg 0x24: [mem 0xd06c6000-0xd06c7fff]
[ 0.210524] pci 0000:04:00.7: enabling Extended Tags
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I680ef9798f2f0e7e0646f0fd30bef58398b7bf19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72197
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because the EFS is now fixed at 0xff020000, the ChromeOS RO region needs
to be moved to the bottom of the ROM area to cover that space.
The RO Region 6MiB, but you can't actually set 6MiB as RO - it's either
4 or 8MiB, so that's adjusted. To leave some room for the RW_LEGACY
region, the two RW regions are adjusted to 3MiB each, which should be
plenty.
The GBB region had to be moved from the front of the WP_RO region to the
end to avoid conflicting with the EFS, which needs to be inside the
coreboot cbfs area.
Also get rid of AMD_FWM_POSITION_INDEX. The FWM position is no longer
needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I683155ec0f4e6a62d862b9e2fa76af45f4cd5493
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The newer AMD SoCs define ACPI_SCI_IRQ in the SoC's acpi.h header file
and use this definition in the mainboard code, so port this back to
Picasso.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib569747aa388d7953e79de747905fb52c2a05e74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Now that the next generation of APUs is officially announced, we can
unmask morgana.
The chip formerly known as Morgana is actually Phoenix.
Surprise!
This patch just changes the name across the entire codebase.
Note that the fw.cfg file will stay pointing to the
3rdparty/amd_blobs/morgana/psp directory until the amd_blobs_repo is
updated.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ie9492a30ae9ff9cd7e15e0f2d239c32190ad4956
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71731
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While pademelon may be a desktop board, it's not available for purchase,
which means it should be presented here as an eval board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5038935bb6f2ba530ea6e16ac84c1746efec8e48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix:
cc1: error: src/mainboard/amd/mandolin/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ifbe6fda12088ddf51b6a177116aa542dbacc7672
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix:
cc1: error: src/mainboard/amd/bilby/acpi: No such file or directory [-Werror=missing-include-dirs]
Change-Id: Ie167cd362b55e38870d26a877d8181b2b07b8639
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I4f2f02623b060ef0ebefc5aceb713c77a8b1e9a6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71523
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable GPP clk req disabling on morgana after reviewing against morgana
ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id2502137486df7a8b0ac6a4b3e061b25b23e2e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70465
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update pci int defs per preview of next ppr after rev 1.52, #57396
Update birman and mayan mainboards to remove deleted PIRQs.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I10e13784761f0b9245f0ca10e3cd07d396ec4224
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70379
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Two GPIOs were set as SCI, but are not GEvent capable pins on morgana.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I00dc1b2595c047ce6898b394061d119ac8680755
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Configure mayan GPIOs per schematic 105-D59700-00A Rev 1.00
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I283afc716487fd8fa6d455194c382d87a3e6860b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change the EC FW CBFS filename prefix to a more accurate "ec/"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic789df11160e3ffe7b7294b11e1fa80e3c3961ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70206
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 2c102232e8f7 ("mb/amd/chausie,google/skyrim: increase
RW_MRC_CACHE size to 120 kByte") increased the MRC cache size, but with
the change the default AMD_FWM_POSITION_INDEX which is 5 for the 16MByte
flash size, the amdfw part won't be placed on the expected position,
since the cbfs header is in that exact location and cbfstool places the
amdfw part right after that. Change the AMD_FWM_POSITION_INDEX to 4 for
the non-chromeos builds to work around this.
TEST=Non-chromeos chausie build now boots and doesn't fail any more
before releasing the x86 cores from reset
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I89fe1d0672139e04070f05c6c8fa8955edcfc7ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70133
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure birman GPIOs per schematic 105-D67000-00B v0.7
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I5459efb38431e568e25405c440b5b9cf1354f02f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
mayan is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well. amd/mayan is started
as a copy of amd/birman.
Change-Id: Id6801e6c6e706ae3878ce9e2c3d6452964235148
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70010
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that we have a common init_tables in all mainboards using AMD SoCs,
both the population of the fch_pic_routing and fch_apic_routing arrays
and the definition of those arrays can be moved to the common AMD SoC
code to not have the code duplicated in all mainboards.
BUG=b:182782749
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I8c65eca258272f0ef7dec3ece6236f5d00954c66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Gardenia and Pademelon had the same mainboard_picr_data and
mainboard_intr_data data arrays. Compared to Kahlee there were 4
differences for PIRQ_F, PIRQ_SCI, PIRQ_SD and PIRQ_SATA in the IRQ data
arrays.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia460b467990be7c3e6261440505988a9770ea084
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68852
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable WLAN power and deassert the various radio disables.
TEST=boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2d21905001fa776c0d5c864d83dcd697e3febe0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Change the EC FW CBFS filename prefix to a more accurate "ec/"
TEST=build and boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib9ee24ca06b29c74cc0a91f9e4789df00ba1ba53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Instead of including pci_int_defs.asl in each board's DSDT, include it
in the common soc.asl. This moves the PRQM OperationRegion and the PRQI
IndexField defined in pci_int_defs.asl into the \_SB scope, but those
are defined inside the \_SB scope both in the Picasso reference code and
for the AMD SoCs from Cezanne on.
TEST=Both Linux and Windows still boot and don't show ACPI errors on
Mandolin after moving this inside the \_SB scope
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e7bfb15de184cc43cd17c8249be0f59405793f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
This aligns Picasso more with the newer AMD SoCs and also makes it a bit
clearer what this file does. Also remove the unneeded tabs at the
beginning of each line.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie6e5ee815e4346004bc864a6111a255dc689eae8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
These boards use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I43c7075fb6418a86c57c863edccbcb750f8ed402
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These boards use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I3495d140a244bbbf63e846fcd963d69907e09719
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These boards use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.
Change-Id: I9efb5cb1149cc4cf6337c47af8a2f4c4b55f4368
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This APCB binary is not used for coreboot builds. Coreboot does not
support RW APCB.
Change-Id: I4d317ae31cf226b5481619f1539abb6237033f7c
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Birman should work with either Morgana or Glinda SoCs, so configure the
mainboard to allow building with either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I56206cd9ad5db99c00b734430b250e04ea9e0609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
This ports the changes to the way the fch_pic_routing and
fch_apic_routing arrays get populated from Mandolin to Bilby, Birman,
Chausie and Majolica. This is a preparation to move the init_tables
implementation to the common AMD SoC code in a later patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia957056b60dafbc52a9809a4563a348ad7443376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Make sure that the intr_index is valid to avoid out-of-bounds writes to
the fch_pic_routing and fch_apic_routing arrays.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45ab115f3814b212243c4f6cf706daf77b6ff3b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Introduce mb_get_fch_irq_mapping to access the FCH IRQ routing mapping
information and use it in init_tables to get the mapping instead of
directly accessing the array's contents. This is a preparation to move
the init_tables implementation to the common AMD SoC code in a later
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c39ea9de5ebbf70d2c5a87bfdfe270796548c5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Use the same fch_irq_map name in all mainboards using the Picasso,
Cezanne, Mendocino and Morgana instead of using a mainboard-specific
name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I035cffb9c6c8afd6bd115831e8eed4a395e2a7fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
string.h defines the memset function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I242a0382e7020681b6c3a25f75a2a91cbccbe815
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two new types for MDN DDI descriptor
BUG=b:228284940
TEST=Normal boot and S0i3 cycles
Signed-off-by: Jason Nien <finaljason@gmail.com>
Change-Id: I02793f032f9855dac202a5aca8666c26426d6cb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66847
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
This AMD reference board is called Pademelon and not Padmelon, so fix
the name in coreboot. Also update the corresponding documentation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id1c7331f5f3c34dc7ec4bc5a1f5fe3d12d503474
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The PCIe port descriptor list seems to be specific to Merlin Falcon and
Prairie Falcon has a different PCIe root port configuration. Since I
neither have the board nor the different APUs, I just add a comment
about this instead of trying to come up with a PCIe port descriptor list
that may or may not work properly on Prairie Falcon APUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e1eb67a8f684297bbefc6e2593250d7bd45593f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I509daac75c80bdca808706f783b04843209cc313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68380
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The board's PCIe port descriptors have the PCIe engine disabled, so
update the devicetree accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic97a54c3cc762a36752d6b9f21467428912a9edd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68379
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9a429c0fd23eb3b52a19a974b22079d675e3506a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68318
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since commit 60e9114c6210 ("include/device: ensure valid link/bus is
passed to mp_cpu_bus_init"), no dummy LAPIC device is required under the
CPU cluster device. Since the CPU cluster device is already present in
the Stoneyridge chipset devicetree, drop the whole CPU cluster part from
the mainboard's devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8918c14be25ac9756926a9c6a2806a3dceced42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68317
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using a Merlin Falcon APU, explicitly enable the PCIe root port at
B0D3F1. B0D3F0 is only a dummy PCI device function, but needs to also be
enabled in order for the actually used function to be usable. Prairie
Falcon doesn't have and PCI device 3 on bus 0, so remove D3F0 from the
common mainboard devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01f9b9ac2a9ebd5899a093d97eb5b2d76d309f66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68315
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the correct PCIe root ports in the devicetree so that the
configuration matches the PCIe port descriptors in
src/mainboard/amd/padmelon/bootblock/OemCustomize.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb00a65adcf2059d7432a8df08654bb0ba965e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68314
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCI devices that aren't present in the devicetree will be treated as
enabled. Since the chipset devicetree that will be added in a follow-up
patch disables this device by default, explicitly enable the IOMMU
device on the Stoneyridge mainboards that don't disable it to keep the
same behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a2cdd00abe8309244829dc633dd8a9ca0038dfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68313
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the devicetree files are passed to util/sconfig without being
processed by the C preprocessor, using #if in the devicetree won't give
the behavior that might be expected. Instead sconfig treats the #if as a
comment, but still processes all other lines. To get the intended
behavior, replace the C preprocessor usage in the devicetree by moving
the APU-specific parts to override devicetrees that get selected
according to the selected APU type.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iddd317b27a838849fa40c0fb77d942609104cf04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68312
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
birman is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I4b16854c954949217a76c3d4f04ddc4001f64337
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68196
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file isn't correct, since the Stoneyridge SoC doesn't have a legacy
PCI bridge on bus 0 bridge 0x14 function 4. Google/Kahlee doesn't select
HAVE_PIRQ_TABLE, so it's likely safe to also not select it for this
board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibaf470b9ff7823019772d43af98ebc47af395728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If6cdf02c56778da67b56afbb71f9f01107f23d2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I2bd5e09f51918fe4c7e954edf54ab4d9bc629fd1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the BIT() macro instead of reinventing the wheel.
TEST=timeless builds are identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I873013feebd30c86290dda692c7b137d5f3c4729
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Chausie fails to boot without this option set. Enable in the mainboard
rather than the SoC Kconfig to not impact Skyrim.
TEST=boot to OS
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9f2a1be9eddb9e17407d00ff50ceb70a2718ce3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
These comments don't add much value, so remove them.
Change-Id: I7e9692e3fe82345cb7ddcb11c32841c69768cd36
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66713
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
These files contain no creative content, and therefore have no
copyright. This effectively means that they are in the public
domain.
This commit updates the unlicensable empty (and effectively empty)
files with the CC-PDDX identifier for license compliance scanning.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0b76921a32e482b6aed154dddaba368f29ac2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66497
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim. coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".
BUG=b:239072117
TEST=Builds
Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Make the default Microchip EC firmware path/to/file values overridable
by adding prompts to the strings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I300f78a11960dbe193165fcb379b7190e3de4545
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id56310bd616cd19fee5dc934676006b2dc34b1ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65929
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I37ed13e1fa318ca0f8381f5b1b409bf80fa4da11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ifc915e2825724fdaac67d259e1af2079893492a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I490a7f0c9cb32ca1ea246c14b72852814553214f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create PSP NVRAM and RPMC NVRAM region with size 128K & 64K
respectively, which are supported region by the PSP.
moved CBFS up due to build error, CBFS need not to be at the end the flash for amd Zen cpu.
Change-Id: Ide778c61a755697c1bef1eaa87f2976d8ff12eb6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia24a502994d24f3341273c5e6f768687ad20baf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65113
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The general purpose PCIe clock outputs 0, 1 and 3 are used with their
corresponding clock request pins, so set the gpp_clk_config to
GPP_CLK_REQ for those and disable the unused output 2. This matches the
DXIO descriptor in port_descriptors.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I38ab8d6d824617509fdd18f06d5593889ec50666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65112
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The APOB data in DRAM is larger than the 96 kBytes of RW_MRC_CACHE, so
it won't fit in the flash and makes soc_update_apob_cache return early
before writing the APOB data from DRAM into the flash with this warning:
[WARN ] RAM APOB data is too large 1db18 > 18000
Increasing the RW_MRC_CACHE size to 120 kByte fixes this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I763d20f504d4f5b7cea68f21f409de9a1035f440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64555
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the MS bit in EC SW02 register to enable s0i3
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I97b6adf48b49635251c70015f1d87fd8ca11d539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: I9593c24f764319f66a64715d91175f64edf10608
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Chausie and Majolica boards use S0ix which is mutually exclusive
with S3, so don't select HAVE_ACPI_RESUME.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d1bf33ad017dfbf908e0a195949998668c8e137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64605
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Specify the USB PHY settings in the devicetree instead of relying on the
FSP defaults. The USB PHY configuration for Chausie are taken from the
internal UEFI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cc38e6e26d53802773fe3c405415de15cca98a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I8d55fc93f6ec413d0cbcea2f8e0a90a76f1803cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
The first target for the add_intermediate targets is always
$(obj)/coreboot.pre.
Change-Id: Iea2322ca1abd43900f3631b7965f07fed4235ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: Iba80c4a5960c6fb59f542b33e8e769576ccfed59
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Read the EEPROM to detect the DDI type.
BUG=b:225139014
TEST=Boot chausie and correctly detect display card type
Change-Id: I3ddd8789e75d5da2ea1e6ce9a81e5ebb2cf3c007
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add support for the chausie EC. Use EC to configure default board GPIO
settings.
Change-Id: I3e59e17644cddf1a508614f90c20561bde2691fb
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Chausie uses the spi1 pads for eSPI
Change-Id: Iee9b92dd9b4e84764568ec3cc8d1fce731e0d1a7
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63866
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The only purpose of mainboard_chromeos_acpi_generate()
was to pass cros_gpio array for ACPI \\OIPG package
generation.
Promote variant_cros_gpio() from baseboards to ChromeOS
declaration.
Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Removing unnecessary "czn" in variable name. Majolica is always a
cezanne.
TEST=Timeless build
Change-Id: I490111ecea84c934585d0bbd623486fba76eb7f1
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63261
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove "czn" from the variable names since chausie does not use cezanne.
TEST=Timeless build
Change-Id: I8cc854f4c60707c7fec5cd7fef1c4550883cd45a
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I31db6c138a21dc22e7aa473f2215ca2c7594326c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63163
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|