summaryrefslogtreecommitdiff
path: root/src/arch/riscv/include
AgeCommit message (Collapse)Author
2019-07-12arch, include, soc: Use common stdint.hJacob Garber
There are only minimal differences between the architecture specific stdint.h implementations, so let's tidy them up and merge them together into a single file. In particular, - Use 'unsigned long' for uintptr_t. This was already the case for x86 and riscv, while arm and mips used 'unsigned int', and arm64 and ppc64 used 'unsigned long long'. This change allows using a single integer type for uintptr_t across all architectures, and brings it into consistency with the rest of the code base, which generally uses 'unsigned long' for memory addresses anyway. This change required fixing several assumptions about integer types in the arm code. - Use _Bool as the boolean type. This is a specialized boolean type that was introduced in C99, and is preferrable over hacking booleans using integers. romcc sadly does not support _Bool, so for that we stick with the old uint8_t. - Drop the least and fast integer types. They aren't used anywhere in the code base and are an unnecessary maintenance burden. Using the standard fixed width types is essentially always better anyway. - Drop the UINT64_C() macro. It also isn't used anywhere and doesn't provide anything that a (uint64_t) cast doesn't. - Implement the rest of the MIN and MAX numerical limits. - Use static assertions to check that the integer widths are correct. Change-Id: I6b52f37793151041b7bdee9ec3708bfad69617b2 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-23riscv: Fix MENTRY_FRAME_SIZE to fit different machine lengthsXiang Wang
Change-Id: Iabe390963bcbeb9ec6016faa8312d101431942da Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04arch/io.h: Separate MMIO and PNP opsKyösti Mälkki
Change-Id: Ie32f1d43168c277be46cdbd7fbfa2445d9899689 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31699 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-13riscv: Add initial support for 32bit boardsPhilipp Hug
* Adding separate targets for 32bit and 64bit qemu * Using the riscv64 toolchain for 32bit builds requires setting -m elf32lriscv * rv32/rv64 is currently configured with ARCH_RISCV_RV32/RV64 and not per stage. This should probably be changed later. TEST=Boots to "Payload not loaded." on 32bit qemu using the following commands: util/riscv/make-spike-elf.sh build/coreboot.rom build/coreboot.elf qemu-system-riscv32 -M virt -m 1024M -nographic -kernel build/coreboot.elf Change-Id: I35e59b459d1770df10b51fe9e77dcc474d7c75a0 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-02-02riscv: Simplify payload handlingXiang Wang
1. Simplify payload code and convert it to C 2. Save the FDT pointer to HLS (hart-local storage). 3. Don't use mscratch to pass FDT pointer as it is used for exception handling. Change-Id: I32bf2a99e07a65358a7f19b899259f0816eb45e8 Signed-off-by: Xiang Wang <wxjstz@126.com> Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31179 Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19arch/riscv: Define and use SBI_ENOSYSJonathan Neuschäfer
Change-Id: Ia7f409ebc7e50383a7e445ef8806953347501dab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-11-05riscv: add support for supervisor binary interface (SBI)Xiang Wang
SBI is runtime service for OS. For an introduction, please refer to https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.md Change-Id: Ib6c1f21d2f085f02208305dc4e3a0f970d400c27 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-11-05riscv: add support smp_pause / smp_resumeXiang Wang
See https://doc.coreboot.org/arch/riscv/ we know that we need to execute smp_pause at the start of each stage and smp_resume at the end of each stage. Change-Id: I6f8159637bfb15f54f0abeb335de2ba6e9cf82fb Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/29023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-30src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29312 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11riscv: add physical memory protection (PMP) supportXiang Wang
These codes are written by me based on the privileged instruction set. I tested it by qemu/riscv-probe. Change-Id: I2e9e0c94e6518f63ade7680a3ce68bacfae219d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28569 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-21arch/riscv/include/arch: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: If52de0d87b02419090b29a7cf1952905d3f975f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28691 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14arch/riscv: provide a monotonic timerPhilipp Hug
The RISC-V Privileged Architecture specification defines the Machine Time Registers (mtime and mtimecmp) in section 3.1.15. Makes it possible to use the generic udelay. The timer is enabled using RISCV_USE_ARCH_TIMER for the lowrisc, sifive and ucb soc. Change-Id: I5139601226e6f89da69e302a10f2fb56b4b24f38 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27434 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14arch/riscv: add missing endian.h header to io.hPhilipp Hug
Make it uniform as other architectures also include it in io.h Change-Id: I62c2d909c703f01cdaabdaaba344f82b6746f094 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28601 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14complier.h: add __always_inline and use it in code baseAaron Durbin
Add a __always_inline macro that wraps __attribute__((always_inline)) and replace current users with the macro, excluding files under src/vendorcode. Change-Id: Ic57e474c1d2ca7cc0405ac677869f78a28d3e529 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-10riscv: update misaligned memory access exception handlingXiang Wang
Support for more situations: floating point, compressed instructions, etc. Add support for redirect exception to S-Mode. Change-Id: I9983d56245eab1d458a84cb1432aeb805df7a49f Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-10riscv: update mtime initializationXiang Wang
Add a interface, which is implemented by SoC. Change-Id: I5524732f6eb3841e43afd176644119b03b5e5e27 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-05riscv: add entry assembly file for RAMSTAGEXiang Wang
RAMSTAGE will revoke CAR/scratchpad, so stack and exception handling needs to be moved to ddr memory. So add a assembly file to do this. Change-Id: I58aa6ff911f385180bad6e026d3c3eace846e37d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-05riscv: add support to check machine length at runtimeXiang Wang
Highest two bits of misa can be used to check machine length. Add code to support this. Change-Id: I3bab301d38ea8aabf2c70437e179287814298b25 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-04riscv: add spin lock supportXiang Wang
Add spin lock support for riscv. Change-Id: I7e93fb8b35c4452f0fe3f7f4bcc6f7aa4e042451 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-04riscv: Add DEFINE_MPRV_READ_MXR to read execution-only pageXiang Wang
Must to set MXR, when needs to read the page which is execution-only. So make this change. Change-Id: I19519782fe791982a8fbd48ef33b5a92a3c48bfc Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-02riscv: separately define stack locations at different stagesXiang Wang
BOOTBLOCK/ROMSTAGE run in CAR/scratchpad. When RAMSTAGE begins execution will enable cache, then CAR will disappear. So the Stack will be separated. Change-Id: I37a0c1928052cabf61ba5c25b440363b75726782 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-30riscv: update the definition of intptr_t/uintptr_tXiang Wang
These RISC-V ABIs defined by GCC : ilp32 ilp32d ilp32f lp64 lp64d lp64f. Through this we know that the length of the long's bit is equal to pointer. So update this code. This's more flexible. Change-Id: I16e1a2c12c6034df75dc360b65acb1b6affec49b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27768 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-07arch: Retire cache_sync_instructions() from <arch/cache.h> (except arm)Julius Werner
cache_sync_instructions() has been superseded by arch_program_segment_loaded() and friends for a while. There are no uses in common code anymore, so let's remove it from <arch/cache.h> for all architectures. arm64 still has an implementation and one reference, but they are not really needed since arch_program_segment_loaded() does the same thing already. Remove them. Leave it in arm(32) since there are several references (including in SoC code) that I don't feel like tracking down and testing right now. Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-31riscv: fix issues (timestrap & PRIu64)Xiang Wang
When I tried to compile the RISC-V code (202e7d4f3c), I found some errors: `PRIu64` is undefined src/arch/riscv/timestamp.c does not exist Currently RISC-V does not have the implementation and use of timestamp, so I temporarily delete the code related to timestamp in the Makefile. And define PRIu64. Change-Id: I7f1a0793113bce7c1411e39f102cf20dbadda5d6 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-12riscv: add include/arch/smp/ directoryXiang Wang
Replicate directory layout from x86 for SMP. Change-Id: I27aee55f24d96ba9e7d8f2e6653f6c9c5e85c66a Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27355 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11riscv: add support to check ISA extensionXiang Wang
Add support to check ISA extension for RISC-V. Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-06riscv: use __riscv_atomic to check support A extensionXiang Wang
GCC pre-defined some macros for detecting ISA extensions. We should use these macros to detect ISA features. Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-04-27RISC-V boards: Remove PAGETABLES section from memlayout.ldJonathan Neuschäfer
RISC-V doesn't set up page tables anymore, since commit b26759d703 ("arch/riscv: Don't set up virtual memory"). Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-26arch/riscv: Store mprv bit in size_tJonathan Neuschäfer
CSRs are XLEN bits wide (i.e. the same width as general purpose registers), so size_t seems a little more correct than int. This change doesn't affect functionality because MSTATUS_MPRV already fits in 31 bits. Change-Id: I003c1b88b4493681dc9b6178ac785be330203ef5 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-11arch/riscv: Remove I/O space access functions (outb, etc.)Jonathan Neuschäfer
RISC-V does not have the kind of I/O space that x86 has. Other architectures tend to leave out these definitions as well. Change-Id: I7328dae1f1fa4ef8772750244a0b11a3fa5aa88f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-20arch/riscv: Update encoding.h and adjust related codeJonathan Neuschäfer
Update encoding.h to the version shipped with spike commit 0185d36 ("Merge pull request #165 from riscv/small_progbuf"), and copy the license header from the LICENSE file. Change-Id: I517042e5865986e88a589dc8623745f8d584d6b8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Pass the bootrom-provided FDT to the payloadJonathan Neuschäfer
The RISC-V boot protocol foresees that at every stage boundary (bootrom to boot loader, boot loader -> OS), register a0 contains the Hart ID and a1 contains the physical address of the Flattened Device Tree that the stage shall use. As a first step, pass the bootrom-provided FDT to the payload, unmodified. Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Don't set up virtual memoryJonathan Neuschäfer
Due to changes in the RISC-V Privileged Architecture specification, Linux can now be started in physical memory and it will setup its own page tables. Thus we can delete most of virtual_memory.c. Change-Id: I4e69d15f8ee540d2f98c342bc4ec0c00fb48def0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove the current SBI implementationJonathan Neuschäfer
This Supervisor Binary Interface, which is based on a page of code that's provided to operating systems by the M-mode software, has been superseded by a different (currently not really documented) SBI, which is based on directly executing ECALLs instructions. Thus some of our code becomes obsolete. Just rip it out until we implement the new SBI. Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07arch/riscv: mprv_read_*: Mark result as earlyclobberJonathan Neuschäfer
This fixes a case of mstatus corruption, where GCC generated code that used the same register for the mprv bit and the result. GCC inline assembly register modifiers are documented here: https://gcc.gnu.org/onlinedocs/gcc/Modifiers.html Change-Id: I2c563d171892c2e22ac96b34663aa3965553ceb3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Fix return type of mprv_read_u64Jonathan Neuschäfer
Change-Id: I3dc12feefe5f0762e27d2ad0234371e91313c847 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: Document mprv_{read,write}_* functionsJonathan Neuschäfer
Change-Id: Iaf0cb241f0eb4de241f0983c0b32dbcc28f96480 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-07-25src/arch: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
Change-Id: Id9846ceb714dceaea12ea33ce2aa2b8e5bb6f4df Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-07arch/*: Update Kconfig symbol usageMartin Roth
- Update all symbols to use IS_ENABLED() - Update non-romcc usage to use 'if' instead of '#if' where it makes sense. Change-Id: I5a84414d2d1631e35ac91efb67a0d4c1f673bf85 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20005 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-30arch: Unify basic cache clearing APIJulius Werner
Caching is a very architecture-specific thing, but most architectures have a cache in general. Therefore it can be useful to have a generic architecture-independent API to perform simple cache management tasks from common code. We have already standardized on the dcache_clean/invalidate naming scheme that originally comes from ARM in libpayload, so let's just do the same for coreboot. Unlike libpayload, there are other things than just DMA coherency we may want to achieve with those functions, so actually implement them for real even on architectures with cache-snooping DMA like x86. (In the future, we may find applications like this in libpayload as well and should probably rethink the API there... maybe move the current functionality to a separate dma_map/unmap API instead. But that's beyond scope of this patch.) Change-Id: I2c1723a287f76cd4118ef38a445339840601aeea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-02-20riscv: Suppress invalid coverity errorsMartin Roth
Coverity is detecting 'sp' as a variable which has not been initialized. This is obviously not correct, so this patch *TRIES* to mark it as false I'm not positive that this will work because the annotation needs to go on the line above the error, but this error is inside of a # define. Does the whole #define count as one line? Can it go on the line above the #define in the .h file? Does it have to precede every line where the #define is used? The documentation doesn't make this clear. Should suppress coverity issues: 1368525 & 1368527 uninit_use: Using uninitialized value sp. Change-Id: Ibae5e206c4ff47991ea8a11b6b59972b24b71796 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18247 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-01-16riscv: Move mcall numbers to mcall.h, adjust their namesJonathan Neuschäfer
The new name and location make more sense: - The instruction used to call into machine mode isn't called "ecall" anymore; it's mcall now. - Having SBI_ in the name is slightly wrong, too: these numbers are not part of the Supervisor Binary Interface, they are just used to forward SBI calls (they could be renumbered arbitrarily without breaking an OS that's run under coreboot). Also remove mcall_dev_{req,resp} and the corresponding mcall numbers, which are no longer used. Change-Id: I76a8cb04e4ace51964b1cb4f67d49cfee9850da7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18146 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-16riscv: get SBI calls to workRonald G. Minnich
SBI calls, as it turned out, were never right. They did not set the stack correctly on traps. They were not correctly setting the MIP instead of the SIP (although this was not really well documented). On Harvey, we were trying to avoid using them, and due to a bug in SPIKE, our avoidance worked. Once SPIKE was fixed, our avoidance broke. This set of changes is tested and working with Harvey which, for the first time, is making SBI calls. It's not pretty and we're going to want to rework trap_util.S in coming days. Change-Id: Ibef530adcc58d33e2c44ff758e0b7d2acbdc5e99 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18097 Tested-by: build bot (Jenkins)
2016-12-18riscv: Add support for timer interruptsRonald G. Minnich
RISCV requires that timer interrupts be handled in machine mode and delegated as necessary. Also you can only reset the timer interrupt by writing to mtimecmp. Further, you must write a number > mtime, not just != mtime. This rather clumsy situation requires that we write some value into the future into mtimecmp lest we never be able to leave machine mode as the interrupt either is not cleared or instantly reoccurs. This current code is tested and works for harvey (Plan 9) timer interrupts. Change-Id: I8538d5fd8d80d9347773c638f5cbf0da18dc1cae Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17807 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-15riscv: Clean up {qemu,spike}_utilJonathan Neuschäfer
spike_util.h: - (LOG_)REGBYTES and STORE are already defined in arch/riscv/include/bits.h. - TOHOST_CMD, FROMHOST_* are helper macros for the deprecated Host-Target Interface (HTIF). qemu_util.c: - mcall_query_memory now uses mprv_write_ulong instead of first translating the address and then accessing it normally. Thus, translate_address isn't used anymore. - Several functions used the deprecated HTIF CSRs mtohost/mfromhost. They have mostly been replaced by stub implementations. - htif_interrupt and testPrint were unused and have been deleted. spike_util.c: - translate_address and testPrint were unused and have been deleted. After this commit, spike_util.c and qemu_util.c are exactly the same and can be moved to a common location. Change-Id: I1789bad8bbab964c3f2f0480de8d97588c68ceaf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16985 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-07RISCV: update the encoding.h file.Ronald G. Minnich
Change-Id: I8997e927d82363921a3ff17580b9a575acc1ce16 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/16919 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-09-12src/arch: Improve code formattingElyes HAOUAS
Change-Id: Ic1ca6c2e1cd06800d7eb2d00ac0b328987d022ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16434 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-23arch/riscv: Add functions to read/write memory on behalf of supervisor/user modeJonathan Neuschäfer
Normally machine-mode code operates completely within physical address space. When emulating less privileged memory accesses (e.g. when the hardware doesn't support unaligned read/write), it is useful to access memory through the MMU (and with virtual addresses); this patch implements this functionality using the MPRV bit. Change-Id: Ic3b3301f348769faf3ee3ef2a78935dfbcbd15fd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16260 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Implement the SBI againJonathan Neuschäfer
Not all SBI calls are implemented, but it's enough to see a couple dozen lines of Linux boot output. It should also be noted that the SBI is still in flux: https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/6oNhlW0OFKM Change-Id: I80e4fe508336d6428ca7136bc388fbc3cda4f1e4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Print the page table structure after constructionJonathan Neuschäfer
A new Kconfig option, DEBUG_PRINT_PAGE_TABLES, is added to control this behaviour. It is currently only available on RISC-V, but other architectures can use it, too, should the need arise. Change-Id: I52a863d8bc814ab3ed3a1f141d0a77edc6e4044d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16015 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11arch/riscv: Update encoding.h and dependent filesJonathan Neuschäfer
I copied it from commit e10d2def7d of spike and made sure the copyright header is still there. Change-Id: Ie8b56cd2f4855b97d36a112a195866f4ff0feec5 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-02arch/riscv: Add include/arch/barrier.hJonathan Neuschäfer
mb() is used in src/arch/riscv/ and src/mainboard/emulation/*-riscv/. It is currently provided by atomic.h, but I think it fits better into barrier.h. The "fence" instruction represents a full memory fence, as opposed to variants such as "fence r, rw" which represent a partial fence. An operating system might want to use precisely the right fence, but coreboot doesn't need this level of performance at the cost of simplicity. Change-Id: I8d33ef32ad31e8fda38f6a5183210e7bd6c65815 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15830 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Remove spinlock code from atomic.hJonathan Neuschäfer
These functions are not used anywhere. Change-Id: Ica1f4650e8774dd796be0aff00054f3698087816 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15829 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-19arch/riscv: Enable unaligned load handlingJonathan Neuschäfer
Change-Id: If1c63971335a6e2963e01352acfa4bd0c1d86bc2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15590 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-18arch/riscv: Remove enter_supervisorJonathan Neuschäfer
This function is unused since coreboot starts payloads in machine mode, and it uses the obsolete eret instruction. Change-Id: I98d7d0de5a3959821c21a0ba4319efb610fdefde Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15729 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-12arch/riscv: copy read/write8/16/32 from x86Jonathan Neuschäfer
Change-Id: I12de8f82499074f0fbbc1c09210b00c6a9614c1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15146 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02arch: introduce architecture dependent common variablesAaron Durbin
Stefan and others have discussed their interest in only including options in Kconfig that are directly associated with building a coreboot image. There are variables that are architecture dependent that are utilized in the coreboot infrastructure. To meet that goal, introduce <arch/cbconfig.h> header file which defines variables for the coreboot infrastructure that are architecture dependent but utilized in common infrastructure. Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14454 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-11arches: lib: add main_decl.h for main() declarationAaron Durbin
It is silly to have a single header to declare the main() symbol, however some of the arches provided it while lib/bootblock.c relied on the arch headers to declare it. Just move the declaration into its own header file and utilize it. Change-Id: I743b4c286956ae047c17fe46241b699feca73628 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13681 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-11arch/{arm64,riscv}: remove jmp_to_elf_entry() declarationAaron Durbin
jmp_to_elf_entry() is not defined anywhere. Remove it. Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch: remove stage_exit()Aaron Durbin
It's no longer used. Remove it. Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-18arch/riscv: Add missing license headersMartin Roth
Most of these files are original to coreboot and get the standard coreboot GPL header. encoding.h and atomic.h are from the riscv codebase and have their license. Change-Id: I32506b0ecf88be2f5794dc1e312a6cd9b2a271ad Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12906 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-11-11arm/arm64: Generalize bootblock C entry pointJulius Werner
When we first added ARM support to coreboot, it was clear that the bootblock would need to do vastly different tasks than on x86, so we moved its main logic under arch/. Now that we have several more architectures, it turns out (as with so many things lately) that x86 is really the odd one out, and all the others are trying to do pretty much the same thing. This has already caused maintenance issues as the ARM32 bootblock developed and less-mature architectures were left behind with old cruft. This patch tries to address that problem by centralizing that logic under lib/ for use by all architectures/SoCs that don't explicitly opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option). This works great out of the box for ARM32 and ARM64. It could probably be easily applied to MIPS and RISCV as well, but I don't have any of those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and leave that for later cleanup. BRANCH=None BUG=None TEST=Built Jerry and Falco, booted Oak. Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/12076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-16riscv-memlayout: fix existing memlayout issues, add sbi interfaceThaminda Edirisooriya
Existing memlayout code placed sections in overlapping areas, and would overwrite the payload if it was large enough. Update memlayout.ld in src/mainboard/emulation/spike-riscv to represent the spike emulator, and add sbi interface which now has room into src/arch/riscv/bootblock.S. Add utility code to qemu-riscv, but emulator itself has yet to be updated to new ISA and as such should not be used. Update Makefile to include all the files necessary for sbi interface. Clean up unused include in src/arch/riscv/include/atomic.h and whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld Fixed whitespace issues in spike_util.c Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-15riscv-trap-handling: Add functionality, prevent stack corruptionThaminda Edirisooriya
Trap handling code was bugged in that it loaded in the wrong stack pointer, overwriting the space the processor uses to talk to its host for doing device requests. Fix this issue, as well as add support for handling misaligned loads the same way we handle misaligned stores. Change-Id: I68ba3a114b7167b3212bb0bed181a7595f0b97d8 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11620 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-10riscv-trap-handling: Add implementation for trap calls in riscvThaminda Edirisooriya
RISCV requires the bios/bootloader to set up an interface by which it can get information about memory, talk to host devices, etc. Put implementation for spike in src/mainboard/emulation/spike-riscv/spike_util.c, and src/arch/riscv/trap_handler.c Change-Id: Ie1d5f361595e48fa6cc1fac25485ad623ecdc717 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-10riscv-virtual-memory: Add virtual memory setupThaminda Edirisooriya
Execution in supervisor level code in RISCV requires early setup of virtual memory. Add initialization calls in src/arch/riscv/virtual_memory.c to implement the required page table setup, and helper functions to use when jumping to the payload correctly in riscv. Change-Id: I46e080e0ee8dc13277d567dcd4bf0f61a4507b76 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-08-26riscv-trap-handling: Add preliminary trap handling for riscvThaminda Edirisooriya
RISCV requires a trap handler at the machine stage to deal with misaligned loads/stores, as well as to deal with calls that a linux payload will make in its setup. Put required assembly for jumping into and out of a trap here to be set up by the bootblock in a later commit. Change-Id: Ibf6b18e477aaa1c415a31dbeffa50a2470a7ab2e Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11367 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2015-08-09riscv-spike: support for Spike emulation of riscvThaminda Edirisooriya
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley are working on it, but at the moment spike is the only way to test on riscv. Add support for spike console output for debugging. Privileged ISA: Update to privileged ISA in RISCV (machine, supervisor, hypervisor, user modes) broke exisitng RISCV asm, and bootblock.S was updated to match the new spec. Clean old assembly [pg: things build with gcc 4.9 now, but don't expect them to work. Hardcoding register names into the assembler language may not be the smartest idea of the RISCV folks.] Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-21Unify byte order macros and clrsetbitsJulius Werner
This patch removes quite a bit of code duplication between cpu_to_le32() and clrsetbits_le32() style macros on the different architectures. This also syncs those macros back up to the new write32(a, v) style IO accessor macros that are now used on ARM and ARM64. CQ-DEPEND=CL:254862 BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu, Storm and Urara. Booted on Jerry. Tried to compare binary images... unfortunately something about the new macro notation makes the compiler evaluate it more efficiently (not recalculating the address between the read and the write), so this was of limited value. Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254866 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-02src/arch/*/include/stdint.h: Provide definitions for bool typeAlexandru Gagniuc
Although bool normally belongs in stdbool.h, for our use cases, providing these definitions in stdint.h is acceptable. Change-Id: I1d0ca1018efacc27d7a4a72aa452912e004401f9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8279 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-01-27CBMEM: Tidy up CAR migrationKyösti Mälkki
Move the CAR migration call to arch -specific part of CBMEM init, it is truly a x86 specific thing. Change-Id: I715417e54f197b8745e0670d6b900a5660178141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7860 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-01-27CBMEM console: Fix CAR migration stepKyösti Mälkki
With the change it becomes irrelevant if memcpy() car.global_data or cbmemc_reinit() is done first. Change-Id: Ie479eef346c959e97dcc55861ccb0db1321fb7b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8032 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 22:29:39 +0000