| Age | Commit message (Collapse) | Author |
|---|
|
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid
prompting wrong dmesg as below.
```
usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
```
Mainboard variants to override the USB ports as per the target
board design.
TEST=Able to build and boot google/rex with all USB ports are
working as expected.
Change-Id: Ic3d21151a22f2318413f480f3386bf2dbf696307
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Initial Aurash configuration base on moli design.
1. Set up gpio.
2. Add memory config.
3. There is no SD card setting on aurash, remove it from overridetree.
4. Follow moli psys schematic design.
5. Enable BT offload.
BUG=b:269063331
TEST=emerge-brask coreboot.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: Ia9088cc2937bab72c8c22af592392384a10616a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
Add a Kconfig RUNTIME_CONFIGURABLE_SMM_LOGLEVEL that enables
mainboard to override mainboard_set_smm_log_level for SMM log level.
This can let SMM have different log level than other stages for
more flexibility.
Another reason is that getting certain data that requires searching
from flash VPD or CMOS is not very ideal to be done in SMM, so in this
change the value can be passed via the member variable in struct
smm_runtime and be referenced directly in SMM.
One example is that mainboard can get the desired SMM log level from
VPD/CMOS, and pass SMM console log level via the variable and in SMM
it can be referenced in get_console_loglevel() override function
directly.
Tested=On OCP Delta Lake, verified SMM log level can be overridden.
Change-Id: I81722a4f1bf75ec942cc06e403ad702dfe938e71
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49460
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
While executing S0ix tests on Raptor Lake boards, we observed CPU fails
to enter suspend state, causing failure.
As a workaround, disable package C-state demotion, till this issue
is fixed in ucode.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ie50e1024f4118d82d2ad762b54fa722c43990d12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72942
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: Iab21376d1887b0c79ea463885520781d042b040d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Some platforms have an onboard speaker which could be used as an
indicator of successful boot or critical error, e.g. in die_notify
function. The function assumes that SPKR GPIO is properly configured
by the platform code.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8189b3462bb5140af352fa786db3a6a2a45076f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Per Intel 600 & 700 series PCH EDS (626817), these PCH IDs belongs
to ADL not RPL, though some RPL SoCs are also using ADL PCH.
Hence correct the name reporting to avoid confusion when ADL SoCs
were used.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I61a608e2c99b1d60a99d6ad734b396676f3a2ab2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72999
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1) Samsung K3KL8L80CM-MGCT
2) Hynix H58G56BK7BX068
3) Micron MT62F1G32D2DS-026 WT:B
4) Micron MT62F512M32D2DR-031 WT:B
5) Hynix H58G56BK8BX068
BUG=b:264340545
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I1f650c7e90804e871572f42ac925da85afd7f9d3
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72886
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
|
|
Add support for MTL-P RVP mipi camera functionality
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify SSDT entries
related to mipi camera and verify camera working.
Scope (\_SB.PCI0.I2C1)
{
Device (CAM0)
Scope (\_SB.PCI0.I2C0)
{
Device (CAM1)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I698edd7155fc38477f3416900799e61d3295fd1a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
|
|
This patch adds FW_CONFIG and codec support for MTL-P RVP
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify audio codec listed
under aplay -l and audio working with the connected audio card.
localhost ~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofrt5682 [sof-rt5682], device 0: Headset (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 1: Speakers (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 5: HDMI1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 6: HDMI2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 7: HDMI3 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 8: HDMI4 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Ib29ac3e4105e578e1555076d180b35a8265a99c8
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
HYNIX H58G56BK8BX068 will be used for omnigul.
Add it to the parts list and regenerate the SPDs using spd_gen.
BUG=b:264340545
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: Id4adbaf7611e34107522df988482d9efd229d514
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72967
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Built asrock/b75pro3-m with BUILD_TIMELESS=1 and coreboot.rom remains
the same.
Change-Id: I8db6b870f2d4aac35766717866b519921d270f9e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
- Make variables for the release name and the tarballs instead of
writing them out every time.
- Skip some more unnecessary files when creating the tarballs.
- Remove unnecessary check for the commit ID. It's now a required field.
- Correctly get and save the time of the last release for use in
creating the tarballs.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I56cd5e2dcf01ee55e5d45e837db2f89904b06ddd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Use the common missing APCB warning when the APCB is missing
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie6303bc3457731bcac322770c4c08712f89fce3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move missing APCB warning from birman to amd/common so that other
mainboards can utilize the same warnings if the APCB is missing.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7ae689726ae4f7ccdf6959e47cbb5aee15cdb690
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Extend the coverage of the 'ifeq ($(CONFIG_SOC_AMD_COMMON),y)' case to
the entire file. This matches the coverage of the related Kconfig.
Add comments to endif to show which if they are ending.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I369e23e7ee9463ca1ae487d1e2181c760ae1bab2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70208
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Configure GPIOs according to schematics
TEST=emerge-brask coreboot
Change-Id: Ib27f1c334cad47b3be57f57b7cc8ca5530118328
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72945
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust timing parameters on i2c1 and i2c2 to meet timing requirements.
For SCL, the t-high time is now over the min 600ns requirement
for 400KHz operation (measure at over 700ns). Also, this change
does not violate other parameters - rise time, setup time and hold time.
BUG=b:264704732
TEST=Verified all timings meet spec now
Change-Id: I0e92b2c9c25e7fb5fa7082af3f4a88da168c3ef2
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The NVPCF DSM subfunction specified a incorrect checksum.
Update this function to the proper checksum of 0xaf.
BUG=b:214581372
TEST=build
Change-Id: Ib58bd6cc10703ca67a7a4f520273865a95a4702b
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables S0ix for MTL-P RVP platform
BUG=None
TEST=Able to enter low power idle S0 on MTL-P RVP
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Id84f21d81197e44d6dd0dd8888c80848aa3679e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71994
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
This reverts commit e30695dbe196ea42864ad03af799706eaae11f02.
for meet thermal criteria, modify PS1/PS2 cutoff to default value
BUG=b:229803757
BRANCH=brya
TEST='FW_NAME=vell emerge-brya coreboot'
Change-Id: Ie009788116f1e25db8aed2df58102a316a8aeef2
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72833
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add TPM I2C for aurash to avoid TPM I2C fail.
BUG=b:269050049
TEST=emerge-brask coreboot.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: I1947d2e1189f46d8dab01837f75de7cb6e9e0579
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since it actually depends on the SoC type whether the old PSP
directory table pointer or the new comboable PSP directory table
pointer is used in EFS, get this information from the SoC ID instead
of passing the comboable flag for the SoCs that need to use the new
comboable PSP directory table pointer.
TEST=Binary identical on amd/majolica, pcengines/apu2, amd/gardenia
Change-Id: I0c3f21065939d1b13c2607aba16cbef74dd8d389
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Create the whiterun variant of the skyrim reference board by
copying the winterhold files to a new directory named for the variant.
BUG=b:265955979
BRANCH=None
TEST=emerge-skyrim coreboot and boot up on Whiterun
Change-Id: I3539f84e79c05936fe006bfe9d08743d6a9a6ba7
Signed-off-by: Isaac Lee <isaaclee@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72483
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a FMAP region to support caching GOP-driver-modified VBIOS tables.
Select SOC_AMD_GFX_CACHE_VBIOS_IN_FMAP if CHROMEOS && RUN_FSP_GOP.
Default USE_SELECTIVE_GOP_INIT to y if CHROMEOS && RUN_FSP_GOP.
BUG=b:255812886
TEST=build/boot skyrim, verify cached VBIOS data differs from VBIOS
in CBFS, cached VBIOS data is used when not booting in recovery
or developer modes.
Change-Id: I5857fa4a15250bf6478bffa96b16200e318492b1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Commit 45b1da33c80a ("mb/google/hatch: split up hatch and puff
baseboards") moved puff out from under hatch into its own
mainboard dir, but this basebaord include was left behind.
Delete it as it's not needed.
TEST=build hatch variants
Change-Id: I9045c52006fd232552541d68972d831c8b52da27
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Allows Windows/Linux driver to use the proper jack eject debounce time.
Credit to coolstar for identifying the issue.
Change-Id: I32b94b9285f7c85ff1d67b3d78c845835bbf90d7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add "SATA" to DSDT as it's referenced by Intel PEP SSDT.
Fixes warning shown in Linux:
ACPI Error: AE_NOT_FOUND, While resolving a named reference
package element - \_SB_.PCI0.SATA (20220331/dspkginit-438)
Change-Id: I65a1d17bce246022859f011cdc4712e1206a98fe
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72762
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The PPCC method should return the package, but is missing the return
statement, leading to DPTF/S0ix to not function properly. Add the
required return statement.
TEST=build/boot Win11 on google/banshee, verify DPTF, S0ix functional.
Change-Id: I051db7d69dd6cdfbb07caf649247ee166c1c74ac
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72921
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch overrides `SkipExtGfxScan` UPD as the Rex device is
equipped with an on-board graphics device hence, skip scanning
external GFX devices.
BUG=b:228002764
TEST=Able to save ~1ms+ boot time on google/rex.
FSP FPDT Data is showing the timestamp between those function calls.
Without this patch:
[INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 979684 -> 22
[INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 980815 -> 1131
With this patch:
`CheckOffboardPcieVga` is not getting called.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I20aa09e80671ab94e639787f40b95b740bbe5efb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch allows override to the `SkipExtGfxScan` UPD.
Ideally a platform with an on-board graphics device should skip
scanning external GFX devices aka set this UPD to `1`.
BUG=b:228002764
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I00e15b71ed67119df9ca6f98a750ede109ff33fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow thermal table to modify setting.
"stapm_time_constant_s" = "200" to "275"
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7fe05fe1c17258a3323b8d04302212e76a388797
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Add support for the selective GOP init feature by only running the FSP
GOP driver when necessary: if the FMAP cache is invalid, or if the
board is booted in either recovery or developer mode.
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: I7ddadc254e05aca0fdd7a9567160a9329cb0e15c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Write the SHA256 hash of the cached VBIOS data when saving to FMAP,
and use it to validate the data read from FMAP on subsequent boots.
Add TPM2 as a dependency to the selection of VBIOS_CACHE_IN_FMAP.
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: I9c8f23b000b90a1072aeb7a57d3b7b2b2bc626dc
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72402
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add methods to store and retrieve the hash of the data stored in the
VBIOS cache FMAP region. Add a dedicated index in TPM NVRAM to store
the hash, and methods to calculate/read/write it.
Modeled after mrc_cache_hash_tpm.{c,h}
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: I030017d3bf956b8593bc09073ad6545b80a5b52b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Make does its work in two distinct phases. The first one basically
initializes and expands all variables, which are not in a recipe and
the second expands all variables inside recipes and then executes the
recipes if necessary.
Currently on some mainboards it can happen that cpu_microcode_bins
variable is filled with microcode paths AFTER swid-files-y is expanded
in the prerequisite for the sbom rule. That causes the
"$(build-dir)/intel-microcode-%.json pattern matching rule not to be
invoked. At the time, when the recipe is executed however (second phase
of make), swid-files-y will now contain the cpu microcode paths from
cpu_microcode_bins. That causes the goswid tooling to fail since the
necessary files were never created, since
"(build-dir)/intel-microcode-%.json" target was never executed.
In order to trigger the expansion of swid-files-y at the second make
phase (after cpu_microcode_bins is fully filled), this patch makes use
of make's secondary expansion feature.
Before on some boards (including samsung/lumpy) the goswid tool
complained about not finding the microcode sbom files.
Test: build samsung/lumpy with CONFIG_SBOM_MICROCODE=y
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I884469a388fd48be89d74ccda686dd8f299d63eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
By saving the results of amdfwread into a file, it only needs to be run
once instead of every time amdfwread-offset-size-cmd is called.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I1afaf65b9b2f9fb856aefc3ff37fb3a3442f6369
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72924
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The "which" command is not a posix command. Additionally, if a file
is not found, it outputs "command not found", so when checking to see
if the response is "", that doesn't work.
"command -v" is a posix compliant replacement that doesn't put out any
text if the command is not found, so is more suitable in this case
anyway.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I22207e818c847d50998f90c9abd55a3cb4bb2ab3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
To assist in debugging, add a way for PSP_verstage to send postcodes to
the system.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I22e45e26f599a0b4f0b781e9b97fccb68e2e5cc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ifbc1814fbc123752bdc96f1f72344ed0333fae2e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH.
BUG=b:263548436
TEST=emerge-brask coreboot
Change-Id: Iffbc9dc932325cdd2176b36795a2ff1b3690fbf8
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72941
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH.
BUG=b:263548436
TEST=emerge-brask coreboot
Change-Id: I610d53059e86945693bc5b3d7e43462e53640564
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72940
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Updating from commit id ecb87bfc:
Add PRESUBMIT.py
to commit id 03c8969b:
get_gbb_flags.sh: Use futility gbb --explicit
This brings in 23 new commits.
Change-Id: Ie5a20071f00e61e03193eef79b3b123cf25fe4e0
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The correct ACPI device for DPTM is TCPU; fixing this puts the
participant devices under the correct parent device, and allows
Windows to properly go into S0ix.
TEST=builb/boot Win11 on google/banshee, verify Si0x functional.
Change-Id: I1b3e2655d4d42e008dead9bc87b73ce02868fdfa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Instead of using PCI_DEVFN(SMBUS_DEV, SMBUS_FUNC), use the equivalent
SMBUS_DEVFN define.
Even though the FCH IOAPIC is in the LPC part of the FCH, it needs the
IVRS IOAPIC table's source_dev_id field set to SMBUS_DEVFN which is the
function 0 of the FCH PCI device. LPC is function 3 of the FCH device.
When assigning LPC_DEVFN to source_dev_id, the kernel from Ubuntu
2022.04 LTS complains about the IOAPIC part of the IVRS table being
wrong:
AMD-Vi: [Firmware Bug]: : No southbridge IOAPIC found
AMD-Vi: Disabling interrupt remapping
With SMBUS_DEVFN being used as source_dev_id, no such error is reported.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I8470d67b2513031e75fb422d4c1c181e017ace0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
5/5
of split changes of https://review.coreboot.org/c/coreboot/+/58552/28
Change-Id: Iba2ebd5d0310538e04c07493d28039509ad02321
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
APOB on Phoenix is larger, so expand the reserved DRAM and MRC_CACHE
regions to fit. This requires moving memory addresses around to prevent
overlapping memory linker errors.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42af7230ca5f09ba66b2b3c4f99ac3feac7feeea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Glinda and Phoenix have different requirements, so split the birman FMD
files to better apply to each SoC.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia2dbaeb8af04fb1d1224c397d728929c50800dfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3919fba40f22ee84b0a3eee1ac7b6e48c076d713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I15e29443d2735342a5a43339f5bb095e5115349c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change adds some new acronyms to the list, clarifies a couple of
points, and fixes a couple formatting issues.
I was planning on leaving this open for a bit and continuing to add
to the patch. If anyone else wants to help, please feel free to update
this patch as you see fit.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I07212849640e8ef14e3c4a41ade29498a4578bc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Update the fmap_config.h dependency now that SMMSTORE is compiled into
all phases. This makes parallel builds work again.
Change-Id: Ie8a44c28ea9f3d4794f06d0fd320f5c765513a32
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Some of the eDp panels use 6bit color depth as default.
Set the default color depth configuration to 6 bit when there
is no match with the supported color depths.
BUG=b:255870643
TEST=Validated on sc7280 Zombie development board
Change-Id: I2cea10ad417a05f020e4c418f15212fee06a2369
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72744
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct the interface timing parameter calculation for eDP interface
to avoid writing into the blanking region.
BUG=b:255870643
TEST=Validated on sc7280 Zombie development board
Change-Id: I069ca351d8c60d071debb23a5e48840701441977
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72743
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some FSPs (such as SPR-SP FSP) support SOC_INTEL_PCIE_64BIT_ALLOC.
In such case, is_pci64bit_alloc() return 1.
Change-Id: Ic33967255baf4675cd72e0db32ef3fb7f5658296
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72441
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This corrects the word "echi2" to "ehci2".
Change-Id: Id8911de147538f4614627cfca449bad528ab6780
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Allow other drivers to use the SMMSTORE region device.
Change-Id: I6316b703829590bd6f41c3d4013b4a4660b9cbab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The function has already moved to fw.cfg.
4/5
of split changes of https://review.coreboot.org/c/coreboot/+/58552/28
Change-Id: Idf9e491ed46ae574ccd17f24925e3e5c595039fa
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The fw.cfg should combine the SOC name.
This is for future combo feature. Each entry in combo has its own
fw.cfg.
The soc_id in struct cb_config can only be available after the fw.cfg
is processed.
Some functions which take soc_id as a parameter can be simplified.
3/5 (and the key one with same change ID)
of split changes of https://review.coreboot.org/c/coreboot/+/58552/28
Change-Id: Ib0eead1f2156542ea03d58145f5ad67683bf9b52
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
2/5
of split changes of https://review.coreboot.org/c/coreboot/+/58552/28
Change-Id: I18f73462a3995038fe93750320dfc053fec969ba
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add links to OpenSecurityTraining2 courses for newcommers
Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com>
Change-Id: Ifd97996579576b35588fc0db42c16ee20d961760
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Use existing functions instead of open-coding the same functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie35c7e0fd3caa25b0d3d02443609e54dd2fdcb7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
acpigen_write_rom open-codes this functionality, so add a function for
this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief25dd854d1639a295c021e9d02c05b4cc61109c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use existing functions instead of open-coding the same functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I660bd5d357eb86c19a5a7847925f6176c3fb4425
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add Raptor Lake (RPL) 28W dptf settings for Brya0
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on brya
Change-Id: I5d06c1ace5b481012ea39f2a57570eb6330479cb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Add Raptor Lake (RPL) 28W dptf settings for Skolas
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on skolas
Change-Id: I4364ca6a50906c2a6dd0e754238264c680e7ebd0
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the Brya
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Brya system
Change-Id: Ifd5256221b82eae2cfe8009918f8ff4791751b4d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the skolas
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Skolas system
Change-Id: I1027ca2bf2323ac959474ee6c38e47fa530113da
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72727
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Brya system
Change-Id: I58bc7132086b0776ee191a242bd1302554f3854f
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72867
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast. This change is based on the discussion on
bug:235311241 comment#7.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Skolas system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ibeddce61b0d73d82a85f486e7cb5cbfa9568953c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71692
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=None
TEST=Check register values
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4a9f8f254dfefcb32a77f558f984bcdd6004d34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72913
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For MDN, PHX, & Glinda platforms, the Keyboard Reset functionality has
been moved from GPIO 129 to GPIO 21.
Additionally, the issue where the system would reset when the KBDRST_L
pin went low even when not configured for Keyboard reset seems to have
been fixed, so remove that text.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iefe7e00d63777577b59ee98cb974b07afea1fd12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72912
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
One of the main functions performed by the FSP GOP driver is to modify
the ATOMBIOS tables (part of the VBIOS) in memory based on the display
output configuration. This device-specific modified VBIOS can be cached
in a FMAP region specific for that purpose, then loaded into memory
instead of the "generic" VBIOS, saving the ~130ms execution time of the
GOP driver.
As this approach only works when no pre-OS display output is needed,
limit its use to ChromeOS builds, with the GOP driver enabled, and
not booting in either recovery or developer modes.
SoCs supporting this feature will need to selectively run the FSP GOP
driver as needed, using the same criteria used here to determine
whether to load the VBIOS from CBFS or from the FMAP cache.
Boards utilizing this feature will need to add a dedicated FMAP region
with the appropriate name/size, and select the required Kconfig options.
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: Ib9cfd192500d411655a3c8fa436098897428109e
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
The SPI BIOS decode lock bit needs to be set, according to
Intel EBG EDS dodcumentation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I3366817b42a5878f16575698ebc546fa7852e285
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
The patch adds support for new Meteor Lake MCH (ID:0x7d16).
TEST=Build and boot the system having MCH ID:0x7d16.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ib0c9ce5c58e4bdec5e7245840f0892d651922cd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Enable DPTF functionality for Meteor Lake based mtlrvp board
BRANCH=None
BUG=None
TEST=Built and booted on mtlrvp board
Change-Id: I8d3e1cd43cf67c3f2081be339589a6da358b668c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Using a &uint64_t as a string argument does not include the required
NULL character termination. Update the format string to only print the 8
desired characters and not continue printing stack memory until a NULL
is found.
Before:
[EMERG] Invalid UPD signature! FSP provided "AMD_01_M;....`", expected was "CEZANE_MAMD_01_M;....`".
After:
[EMERG] Invalid UPD signature! FSP provided "AMD_01_M", expected was "CEZANE_M".
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib334daa8518a92e0cf3d22c4d95908f4c84afe04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72911
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit bf3c648fa7f6 ("soc/intel/skl; mb/google/eve,poppy: Update NHLT
methods") contained a copy/paste error for rammus, swapping the max98373
entry for the correct max98927 one. Change it back.
TEST=build/boot Windows on rammus, verify audio functional with
coolstar's AVS audio drivers.
Change-Id: Ibcd4b752e01866a3dd54997f1d2a6c079b07b7a3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit ae20d4c78f9f ("mb/google/volteer: Fix USB4 enabling for volteer
family") reworked the USB4/TBT config for volteer, but drobit variant
was missed for some reason. Add the missing USB4/TBT entries.
TEST=build/boot Windows on drobit, verify USB4/TBT functional.
Change-Id: I43d771eeaf29b4e141b222ccb05af5cb7ceedc6f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 525c61f74e94 ("mb/google/hatch: Implement touchscreen power
sequencing") contained a copy/paste error; KOHAKU's enable GPIO is set
twice in ramstage, and the reset GPIO not at all, leading the
touchscreen to not be detected.
Correct the copy/paste error by replacing the 2nd instance of GPP_C12
with GPP_D15.
TEST=build/boot Windows/Linux on KOHAKU, verify touchscreen works.
Change-Id: I08d35f1e2a951cdaa463daa34df2134fdc8c65c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enables display backlight control under Windows.
VBT extracted from stock ChromeOS firmware Google_Drallion.12930.543.0.
TEST=build/boot Win11 on drallion, verify OS backlight control
available and functional.
Change-Id: I85065f22b825a7616fa4ac632c42ae7972091e24
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Under Win11, a longer delay after asserting reset is needed for the
Goodix touchscreen to init properly. Increase the reset delay to match
that used for the Goodix touchscreen by other volteer variants (120ms).
TEST=build/boot Win11, Linux on eldrid variant with Goodix touchscreen,
verify functional.
Change-Id: I489f037f0bbade9567aad2ad64404a5ac66965d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow user to pass the output dir for the extracted blobs as the 2nd
argument to the script; if not provided, fall back to the existing
default.
Change-Id: I0f120b69e0b6d14c2763b9a3b2a622e77c4fe0d4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Save the soc_id into a global struct.
Change-Id: I2a0f04a09635086e3076a97b535df8a19d0693ce
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72450
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all firmware which uses VPD uses both RO and RW regions, so either
one not existing is not necessarily an error.
Change-Id: I50f43a25ee24a642c39e2f0b52de2d4fef023f3b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72476
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some older devices use the vpd key 'ethernet_mac' vs 'ethernet_mac0'
for the first/only LAN NIC, so don't treat the key lookup as an error.
If no MAC is able to be found, another error will be printed later
in the driver init.
TEST=build/boot google/fizz, dump cbmem log, verify 'ethernet_mac0'
lookup failure printk output at warning level.
Change-Id: If5226f4686a819a7020fd14f130181420ee1462b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Constitution will use SOLDERDOWN. Add memory.c to override baseboard.
Add mem_parts_used.txt and generate dram_id.generated.txt and
Makefile.inc
Memory:
SAMSUNG K4U6E3S4AB-MGCL
MICRON MT53E1G32D2NP-046 WT:B
BUG=b:267539938
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
Change-Id: Id879b2a7491f29e9fca903dcf3c022ec8ffffab4
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72775
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add EC_HOST_EVENT_USB_MUX to MAINBOARD_EC_S0IX_WAKE_EVENTS for
brask. Without it EC won't send host event to wake AP when USB
MUX is changed during S0ix. It's there for brya but missing
for brask.
BUG=b:267573651
TEST=emerge-brask coreboot
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Id08d9aec9ab3566176369f2ca25cd00b9f0a0ca5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
This reverts commit 8e1bb93fb88bc9cc20aab33a1fe09fb4c0c652a0.
Reason: Enabling L.2 breaks some devices on this bridge. Reverting
until a workaround is found and additional testing is done.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9f721178244e7764e9b08e419db8a8c05ecc29a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Change-Id: I5b7b1c218a0e8c8ba713b370622fbc37a1e57097
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The desktop 9 series PCHs should be the same as the 8 series PCHs.
Change-Id: Iee93fee4f28b88a72c537944159fb7cbb2796235
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Hook up the `wake_on_usb` EEPROM setting so that it works as intended.
TEST=Keysmash on a USB keyboard, verify Hermes does not wake from S3.
Change-Id: I81531b90abae6a62754ea66c47e934e1f440bda2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72906
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO 67 is not currently used on skyrim, so set it as no-connect.
Since it's now free for other purposes, make sure that the
SPI-ROM-SHARING functionality is disabled.
BUG=b:268330591
TEST=Examine registers after change
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id083baf41d25920eca09795453a01aac1d00d0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=None
TEST=Verify that DMI type 3 - Chassis Information Type field has changed
from Desktop to Laptop
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I76c8970fe3fdc2ea322a07f114ad03a0373e152c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72907
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move the missing APCB warning to the end of the build and make it stand
out better. Prior to this patch, the warning would appear as one of the
first build messages and easily be missed due to the rest of the build
messages.
TEST=build with and without proper APCBs being found, warning message
appears only when APCB is not found and stands out more
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iabe32636b8e31fe781519533a329a08535bd661a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add PSP blob Type 0xA2 uMsmu support.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib38ec03bf20f46774f7438b21d18704cc1ec57fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of having a magic entry in the CPU device ID table list to tell
find_cpu_driver that it has reached the end of the list, introduce and
use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is
compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID
instead of the 0 in the CPU_TABLE_END definition.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
1. add functions to generate if greater than conditions:
acpigen_write_if_lgreater_op_op:
if (op1 > op2)
acpigen_write_if_lgreater_op_int:
if (op > val)
acpigen_write_if_lgreater_namestr_int:
if (namestr > val)
2. add function to assignal value to a namestr
acpigen_write_store_namestr_to_op:
namestr = val
TEST=Use above functions and check the generated SSDT table after OS
boot.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Iffe1b23362a7ab58bdc2aa8daf45cd6f086ee818
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72825
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When enable_gpio is used as active low output, the _STA returns
incorrect value.
Also, simply the logic for _STA method.
When enable pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 0 |
| active high | 1 | 1(active) | 1 |
| active low | 0 | 1(active) | 1 |
| active low | 1 | 0 | 0 |
When reset pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 1 |
| active high | 1 | 1(active) | 0 |
| active low | 0 | 1(active) | 0 |
| active low | 1 | 0 | 1 |
Generated _STA method:
Ex: for using active low power enable GPIO pin GPPC_H17:
Method (_STA, 0, NotSerialized) // _STA: Status
{
Local0 = \_SB.PCI0.GTXS (0x5C)
Local0 ^= One
Return (Local0)
}
TEST=Check the SSDT when booted to OS.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ie6f1e7a5b3e9fd0ea00e1e5b54058a14c6e9e09e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72421
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This includes mb/dell/e6400 and ec/dell/mec5035, the latter being
the EC on the E6400. Also link to my repo containing research
and documentation I wrote for the MEC5035.
Change-Id: I5b521e6b1fce5b076be6f0392d99aafac35b0084
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
