| Age | Commit message (Collapse) | Author |
|---|
|
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot Starlab ADL laptop to OS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Iba554af4ff0896e133d20860ff72dd1a10ebd1e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73736
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
This patch adds CPU ID for B0 stepping (aka ES2).
DOC=#723567
TEST=Able to boot on B0 rvp and get correct CPU Name in coreboot log.
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Change-Id: I8b939ccc8b05e3648c55f8f2a0a391cb08f04184
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74300
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id362e023358054df2c4511fd108c313da868306d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74325
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In the non-timeout case in recv_ec_data_timeout, a message like this one
will get printed at BIOS_SPEW log level: "recv_ec_data_timeout: 0x00".
The "timeout" part of the function name corresponds to what the function
does, but the message will only be printed when not running into the
timeout which is a bit misleading and might suggest a problem when there
is none. To avoid this possible confusion, don't use the function name
in the printk, but use "Data from EC:" instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I521f67517f64fc64e24853d96730c3f9459f1ccc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74381
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Take variable names from soc/intel and adjust counter to
start from zero.
Change-Id: I14e1120e74e1bd92acd782a53104fabfb266c3b5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use acpigen_write_processor_device() instead of deprecated
acpigen_write_processor().
Change-Id: I1448e0a8845b3a1beee0a3ed744358944faf66d8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72488
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This fixes the Jenkins build error when building INTEL_ARCHERCITY_CRB
that was caused by the API change in commit 36e6f9bc047f86e1628c8c41d3ac16d80fb344de. This patch removes the
broken API function and also adds package_id log print same as previous
commit mentioned above.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I89e14b40186007ab0290b24cd6bd58015be376b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74436
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
When a mainboard selects ACPI_SOC_NVS and CHROMEOS, CHROMEOS_NVS will be
selected. This causes vc/google/chromeec/acpi/chromeos.asl to be
included in the DSDT and chromeos_acpi_gpio_generate to be called when
generating the coreboot SSDT. When a mainboard also uses
DECLARE_NO_CROS_GPIOS(), this will cause variant_cros_gpio.count to be 0
and variant_cros_gpio.gpios to be NULL. chromeos_acpi_gpio_generate only
checked if the GPIO table was non-NULL, which caused the function to
exit early and not generate the OIPG package which causes the kernel to
complain about referencing the non-existing OIPG package. To avoid this,
only exit in the GPIO table pointer being NULL case if the number of
GPIOs is non-0.
TEST=Error about missing OIPG ACPI object in dmesg disappears on birman.
Before:
[ 0.241339] chromeos_acpi: registering CHSW 0
[ 0.241468] ACPI BIOS Error (bug): Could not resolve symbol [\CRHW.GPIO.OIPG], AE_NOT_FOUND (20220331/psargs-330)
[ 0.241703] ACPI Error: Aborting method \CRHW.GPIO due to previous error (AE_NOT_FOUND) (20220331/psparse-531)
[ 0.241933] chromeos_acpi: failed to retrieve GPIO (5)
[ 0.242011] chromeos_acpi: registering VBNV 0
[ 0.242113] chromeos_acpi: registering VBNV 1
[ 0.242284] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.242462] chromeos_acpi: installed
With the patch applied:
[ 0.242580] chromeos_acpi: registering CHSW 0
[ 0.242714] chromeos_acpi: registering VBNV 0
[ 0.242817] chromeos_acpi: registering VBNV 1
[ 0.242990] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.243249] chromeos_acpi: installed
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie340003afb718b1454c2da4a479882b71714c3c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74375
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch avoids cannonlake base config to select eNEM for CAR by
default. Rather allow other SoC config to choose the applicable CAR
mode between eNEM and NEM.
CML and WHL select eNEM whereas CFL decided to use NEM for CAR setup.
Here is some background about why CFL SoC platform decided to choose
NEM over eNEM:
It was found that some coffeelake CPUs like Intel i3 9100E fail to enter
CAR mode because some MSR used by NEM enhanced are lacking. According to
the Intel SDM CPUID.EAX=07h.ECX=0 reg EBX[12 or 15] should indicate the
presence of IA32_PAR_ASSOC and CPUID.EAX=10h.ECX[1 or 2] reg ECX[2]
should indicate IA32_L3_QOS_CFG and IA32_L2_QOS_CFG respectively but
even on a Intel coffeelake CPU that works with the NEM_ENHANCED these
CPUID bits are all 0 so there is no way of knowing whether NEM_ENHANCED
will work at runtime. Instead just always use regular NEM.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibeaa4d53279ff9cbcd0b2ac5f2ad71925872355b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The 'Starmie' is a mt8186 detachable reference design that will share
most of Corsola design. For AP firmware, there will be a few changes,
mostly in display (MIPI interface and w/o bridge), so we create it
as a variant in Corsola.
BUG=b:275470328
BRANCH=corsola
TEST=./util/abuild/abuild -t google/corsola -b starmie -a
Change-Id: Ic1556ad0031e9a24bf26fa84d7713b7b7928312a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add assert for MT6366_VRF12, define a constant macro for 1200000.
BUG=none
TEST=build board starmie with mt8186.
Change-Id: I6d6a969ae993afcda0596a19928e8f98f343d589
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74394
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add regulator VIO18 support to supply power for STA_HIMAX83102_J02 panel.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: Ie1dd9226b0c4f05f9c9ce6633b7384aa5eb4c978
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74342
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To provide power to MIPI panel STA_HIMAX83102_J02, add support for
regulator VIO18.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
|
|
Currently the xeon_sp code reassigns struct devices apic_id so that srat
entries can be added in a certain order.
This is not a good idea as it breaks thread local storage which contains
a pointer to its struct device cpu.
This moves the sorting of the lapic_ids to the srat table generation
and adds the numa node id in each core init entry. Now it is done in
parallel too as a bonus.
Change-Id: I372bcea1932d28e9bf712cc712f19a76fe3199b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68912
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Avoid asserts related to CNVi UPDs which are not boot critical.
Instead, add error messages which are more helpful in identifying
the issue.
BUG=none
TEST=Boot to the OS on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I49a988b7eda009456d438ba7be0d2918826e1c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74370
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
For security reasons, removing the efivars implementation of the option
API was considered. However, this use-case is not the "None"
option-backend (CONFIG_OPTION_BACKEND_NONE), so the SMM phase also does
not use the no-op in option.h. This causes linker errors when the
option API is called.
For example, src/soc/intel/common/block/pmc/pmclib.c and
src/console/init.c use `get_uint_option`.
Minimising code in SMM can be implemented as a follow-up.
Change-Id: Ief3b52965d8fde141c12266a716f254dd45559d5
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I12462f271821d3d8fe3324d84a65c2341729591e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I8582d401c72ad44137f117315c5c6869654c3e99
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ib4e21732ac31076a1a97a774e03c8466d17c5f29
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Secondary threads need to be added after the primary threads.
Change-Id: I3a98560760b662a7ba7efb46f5f7882fb0f7bb1f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add G2touch touchscreen support for kracko.
BOE NV116WHM-T04 V8.0 with G7500 touch panel sensor IC
BUG=b:277852921
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot & test on DUT
Change-Id: Ic065d5dc2900c6ccfee09031f7a80cefc391f5dd
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74307
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All the variant will use the same dGPU, so make PCIEXP_SUPPORT_RESIZABLE_BARS common.
BUG=b:277974986
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: If8618f2da3133c6b52427375c55a69d7014c4881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74371
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Read IOAPIC ID and number of interrupts from programmed registers.
Change-Id: Ic8ba395bc220fdb691118719f7b32dd7400931f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is no longer a relation between MAX_CPUS and IOAPIC IDs,
start the cleanup with new declarations.
Change-Id: I65888550e359e55402d99e8816ece2061cfcccbc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
BUG=b:276818954
TEST=new_variant_fulltest.sh rex0
BRANCH=None
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Iebc098f8d480ac3e1835b00861fd844d97f281a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch retrieves details of a specified firmware partition table.
The information retrieved includes the current firmware version and
other information about the firmware partition. The patch communicates
with the ME using the HECI command to acquire this information.
BUG=b:273661726
Test=Verified the changes for ISH partition on nissa board.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I0582010bbb836bd4734f843a8c74dee49d203fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=b:277294460
TEST=None
Change-Id: If7fb9ab0c9b1260d342313badb65c55bb9f788c0
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74285
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement the GPS_REQUESTDXSTATE function which forces the
current D notifier state to re-report.
TEST=verified that notifications are forced out when invoked using
acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I6dab9b793fe1d0b1c875eddbe6ae324d2894efe6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently the DNOT function first checks to see if the current DNOT
value has already been reported. Add support to allow forcing regardless
if it had been sent already.
TEST=confirmed that when enabled, all events notify. When disabled, only
events on value change are notified.
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I7a93cca6a8f922574dd46b46572b230755db9aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently the value was being truncated to 4 bytes. Change so that
the full 8 byte value is passed.
TEST=verified function returns expected value using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Icfc775de680e328a2b240595223d7098fee3dc3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This function adds support to convert a integer into a 8 byte buffer
TEST=verified returned buffer is as expected using acpiexec
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I89eb50f1452657c26b97eb5609ed956fa8ee8117
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The logic was not equals, rather than the intended greater than or
equal to for checking the minimum GPS revision.
TEST=version check passes as expected now
BUG=b:271938907
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I66bf1fc32295e1b9e9c41c661ea8e395a1592a86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver.
Enable this option by default to maintain the existing behavior.
BUG=b:270985197
TEST=Verified by enabling/disabling the UPD on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch updates total cpu count variable and total P-core count in
cpu_apic_info_type structure to `unsigned short int` to address more
cores.
TEST=Verify the build on Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I46239cc7ad9870e7134955af56b9f6625be2b002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Create the taranza variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:277664211
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_TARANZA
Change-Id: Id64e48ff2acd6e827fe586a00376183930ddc7e1
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74295
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Its EDID string is "LTN121AT07L02". The vendor sets BLC_PWM_CTL to
0x31313131.
This frequency seems working well on the x200 with this panel, which
is said to be LED.
Change-Id: I8b0ec04c6f6fcb6d4027a5114698db87d7718191
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74182
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The BSP might have non-zero lapicid so set the topology accordingly,
without assuming it is 0. This fixes a cpu exception on at least Intel
Meteorlake. This was caused by FSP CPU PPI being giving incorrect
information about the BSP topology.
This problem was introduced by 8b8400a "drivers/fsp2_0/mp_service_ppi:
Use struct device to fill in buffer" which sets the PPI struct based on
struct device.
TESTED on google/rex
Change-Id: I3fae5efa86d8efc474c129b48bdfa1d1e2306acf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74374
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To quote the gnu make manual: "A phony target is one that is not really
the name of a file; rather it is just a name for a recipe to be executed
when you make an explicit request. There are two reasons to use a phony
target: to avoid a conflict with a file of the same name, and to improve
performance."
Change-Id: I337f4f2e0257a75ba204d21f8aa84292e8233082
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74309
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Processor attached memory should not use reserved_ram_from_to and
treat the calculation of gi_mem_size size as 64MB.
By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms,
this should fix small total memory issue. Before the fix running
command 'free -g -h' under Linux shows the total memory is only 1.4Gi,
after the fix it's showing the expected total memory size 15Gi.
Tested=On AC without attaching CXL memory, the total memory size is
the same as de-selecting SOC_INTEL_HAS_CXL.
On OCP Crater Lake with CXL memory attached, CXL memory can be recognized
in NUMA node 1:
numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 .. 59
node 0 size: 95854 MB
node 0 free: 93860 MB
node 1 cpus:
node 1 size: 63488 MB
node 1 free: 63488 MB
node distances:
node 0 1
0: 10 14
1: 14 10
Change-Id: I38e9d138fd284620ac616a65f444e943f1774869
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Yavilla is a variant of yaviks which is almost identical
to yaviks, so is reusing the yaviks coreboot variant.
so update the GPIO tables to handle these based on fw_config.
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I831b199055c931e7a4a393eeb9e75e83c8ae3c3a
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74264
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select hdmi vbt bin files based on MB_HDMI field of FW_CONFIG.
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I210003c27c83155dd5a768c1a6cdcfd8c849d256
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74262
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Yavilla will leverage yaviks FW build.
It has one additional USB Type-A0 port, support stylus and support WWAN.
Here update devicetree based on FW_CONFIG for yavilla's design.
-Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0
-Enable USB2 port5 and USB3 port3 for WWAN
-Enable pen garage
-Enable rear mipi cam
-Enable Synaptics touchpad
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Use the common acpi_fill_root_complex_tom function instead of the SoC-
level northbridge_fill_ssdt_generator function that does basically the
same.
TEST=Resulting coreboot SSDT remains unchanged on Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add I2C peripheral reset configuration required during early init.
Enabled I2C generic and HID drivers.
BUG=b:275939564
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I44668295fb6ed03992df9d9fc075792e181d1a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74108
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ELOG for Myst.
BUG=b:275938975
TEST=builds
Change-Id: I214e2dbaa3bc40c3f4ca68c8ee4b1398446d7090
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74282
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The USB port configuration was derived from the PPR and schematics.
Primary functions are:
2 USB-C ports
1 USB SS+ type A port
2 Cameras (World/User facing)
1 Bluetooth transceiver
1 WWAN
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Iecb256cad7b2daea1fddfc8323e88ff5c38d1e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable the XHCI controllers in the devicetree for myst project.
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I05dc5bb157f0ef955e4b37e34d7b32678e42ebc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable internal graphics on the phoenix soc for myst projects.
BUG=b:275900162
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ia6ef1ca07b9af491c7d937be5cef4f051852e486
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74104
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
- Add Google MediaTek mainboards
- Update maintainers for MediaTek SoCs and mainboards
Change-Id: Ic3e99b08fe9eb153263470bc6c7a97524e1bf888
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In CB:41119, I sort of made up a mechanism on the fly for how to make
the machine-parseable cbfstool print output extensible without breaking
backwards compatibility for older scripts. But I only explained it in
the commit message which is not very visible. This patch adds a comment
to the function that generates that output so that people who want to
change it can understand the intent.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0d18d59e7fe407eb34710d6a583cfae667723eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
DDI 2..4 are the display outputs multiplexed onto the 3 USB type C ports
as DisplayPort alternate function, so use the DDI_DP_W_TYPEC connector
type for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I659d62bfb426e3e47214203490c34e9c200beee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74299
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the blob type for TypeId0x25_Mp2Fw_MDN_AD03.sbin to
subprogram 0. Delete the extra MP2FW line.
BUG=b:246770914
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I5418b1ed59e1916b971d2eece9f6a2fd0e51b1b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This reverts commit 655f7362e13ca49e3e13a822c916c7dc52573d74.
Reason for revert: Apparently, the change was not properly reviewed. It
not only contains conflicting name and description of the D3COLD
Kconfig, but also creates a conflict between existing devicetree and
Kconfig options for D3Cold/S3/S0ix.
Change-Id: I56ce8f59f8548fc58bc2b3b07c1314e2eed7061c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit dbb97c3243e55a0fd00e692d150c9d38d09b57af.
Reason for revert: dependency for revert CB:73903
Change-Id: Ibc81483239a13f456d20631725641b7219af4ef8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit 6bfca1b689e48be4f72e8fa401f3558d845fc282.
Reason for revert: dependency for revert CB:73903
Change-Id: I56bab4d85d04e90cacfe77db59d0cde6a8a75949
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This reverts commit fd4ad29f1824ad5d8df67f3e30d3908d24cbd8a4.
Reason for revert: dependency for revert CB:73903
Change-Id: I5ed5e3e267032d62d65aef7fb246a075dccc9cf6
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The Kconfig is only used in common code to gather the build time
maximum socket number FSP support. The same information is available
in FSP header as MAX_SOCKET, thus use the FSP as truth of source.
Currently MAX_SOCKET is 4.
Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable iommu in devicetree for myst in order to allow kernel to load and
initialize IOMMU.
Bug=b:276805280
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I94e93afe775b070253464a9d187ad6c028d1b811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable the console UART for myst devices.
Bug=b:275900837
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I52c1b86c46907216d88f98917968b833af0d5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74103
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add initial FW_CONFIG for the myst program.
BUG=b:
TEST=builds
Cq-Depend: chrome-internal:5674351
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: If74c3649d4e8d174d9fe00a4b896c2351ee3ab19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable EC SCI events for eSPI.
BUG=b:275894894
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I8fd858c484f6fcf952bcb4f756ba2e4728091d8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74101
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
These new memory are added for yavilla.
DRAM Part Name ID to assigna
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I3c48b9763f54e2e69f7c2d494fefbabedab2a389
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No need for variant to use _weak.
BUG=b:276818954
TEST=new_variant_fulltest.sh rex0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Uldren
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I3ff8e7db33bfbe4048327825406462262e8d2919
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74335
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With EC's lid switch implementation, there is no need to maintain the
lid switch state in mainboard. Hence remove LIDS ACPI object from
mainboard.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Read the lid switch state
correctly through /proc/acpi/button/lid/LID0/state.
Change-Id: I0f8dc7216337268c421a475f54ee5b28abf33d08
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
With CB:16732, EC can provide default lid switch implementation(LID0
ACPI device). Up until that point, mainboard has been providing default
switch implementation. When EC provides lid switch implementation, the
lid switch state is read from EC either through MMAP or LPC interface.
Hence there is no need to keep mainboard's LIDS ACPI object in sync with
EC's lid switch state. Use only EC's lid switch state on boards using
EC's implementation. This paves the way to remove LIDS ACPI object on
those mainboards.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Trigger lid open/close
events and ensure that they are detected properly through
/proc/acpi/button/lid/LID0/state.
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: open
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: closed
Ensure that the system behaves as expected based on powerd
configuration. After signin, system suspends/resumes for lid close/open.
On signin screen, system shuts down/boots for lid close/open.
Change-Id: I013574d7c21761f167ad38aeed27a419677b8000
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9971209539aa7b74e55673141902b6ad0d698e4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73985
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1c4bdab44f0d73546f52614917dccbe71f0911a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73984
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Archer City CRB is a dual socket CRB with Intel Sapphire Rapids
Scalable Processor chipset. The chipset also includes Emmitsburg PCH.
It was tested with LinuxBoot payload on both dual and single socket
configurations.
The multisocket support depends on Change-Id:
I4a593252bb7f68494f4ccce215ac9cf1eb19b190
Change-Id: Ic02634cd615e2245e394f10aad24b0430cf5cd17
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71968
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add SMI handler code for Myst platform.
BUG=b:275858191
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I92e5e6aef7ab0b84a96d976e29ebf96b56f6f1a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74100
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:270624655
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Id18a311097d575973087eb92fd446a5c511f570e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:270618107
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I688e9c2fdf203cecfd5f200dec6cde9dbc0a9aa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I592c69e0f52687924fe41189b082c86913999136
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I2cb8676efc1aba1b154fd04c49e53b2530239b4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Change-Id: I1a39f355733d10ecd43a1da541ab2e66ba13db15
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Set the P2SB device as hidden as FSP-S is hiding the PCI configuration
space from coreboot on Alder Lake systems.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5cfde7c1f6791578a03d73e89bcde31af608f12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
P2SB device is being hidden from coreboot by FSP-S. This breaks the
resource allocator which does not report P2SB BAR via intel common
block P2SB driver. Hook up the common block P2SB driver ops to
soc_enable function so that the resources will be reported. The P2SB
device must be set as hidden in the devicetree.
This fixes the silent resource allocation conflicts on machines with
devices having big BARs which accidentally overlapped P2SB BAR.
TEST=Boot MSI PRO Z690-A with multiple PCIe devices/dGPUs with big
BARs and see resource conflicts no longer occur.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7c59441268676a8aab075abbc036e651b9426057
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add DTT thermal settings for thermal control provided by
thermal team for rex0 board
BRANCH=None
BUG=b:262498724, b:270664854
TEST=Built and verified thermal entries in ACPI SSDT on Rex board
Change-Id: I00dd97b759c8c68edaeeb4d64422b83c5e86981d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Printing the value of a variable is not informative for a normal user,
so decrease the value from BIOS_INFO to BIOS_DEBUG.
Fixes: b9caac74a320 ("soc/amd/mendocino: Reinterpret smu_power_and_thm_limit")
Change-Id: I22f6293fd47633dfdbdae37b7257f47a5a4bb29c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fix a couple of bugs in the _OSC method for handling
"PCI Host Bridge Device" on Xeon-SP.
- Drop the Sleep. The code doesn't write to hardware at all, so
there's no need to sleep here.
- Make sure that the number of DWORD passed in Arg2 is at least 3.
The existing check was useless as it would not create the
DWordField, but then use it anyways.
- Add check for CXL 2 device method calls which provide a 5 DWORD
long buffer to prevent buffer overflows when invoking the
"PCI Host Bridge Device" method.
Test:
Boot on Archer City and confirm that no ACPI errors are reported
for _OSC.
Change-Id: Ide598e386c30ced24e4f96c37f2b4a609ac33441
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
According to ADL PCH BIOS specification (DOC# 630603) ADL-S PCH
uses a fixed SBREG_BAR of 256MiB starting at 0xe0000000.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ied59a6dad8fb065dc3aeb6281bd32074aaa5e3b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
With the latest hardware revision, the two GPIOs GPD11 and GPP_C8 are no
longer used.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: Ia06f93aee4eccb0e4230f0c3ef53922d42701f21
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74201
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Ioapic information in the devicetree was only used to set up mptables
but this generic driver was removed (ca5a793 drivers/generic/ioapic:
Drop poor implementation).
This removes the unused remainders from mainboard devicetrees.
Remove ioapic setup from sconfig.
Change-Id: Ib3fef0bf923ab3f02f3aeed2e55cf662a3dc3a1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Now the CPU topology is filled in struct device during mp_init.
Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
From request, all type C port limit to to Gen1 5GHz.
So enable UPD usb3_port_force_gen1 for Markarth.
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify the setting will be applied on Markarth.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I9314b67a82ad2993c87f0110db5ec927caaa772b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74087
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add GPU power sequencing changes for the Hades baseboard and variant.
Some signals were added, moved or inverted.
Based on implementation from Agah.
Moved signals:
GPIO_1V8_PWR_EN GPP_E11
GPIO_NV33_PWR_EN GPP_E2
GPIO_NV33_PG GPP_E1
New signals:
GPIO_NV12_PWR_EN GPP_D0
GPIO_NV12_PG GPP_D1
Inverted signals:
GPIO_FBVDD_PWR_EN GPP_A19
ifdef's will be dropped once the Agah variant is retired.
BUG=b:269371363
TEST=builds and verified on Agah that DGPU is still detectable (lspci)
Change-Id: I0b8efe7a34102cf61d4f784103c4a4f9337213f7
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
mainboard_vbt_filename() used to assume that it is called after a call
to get_blc_pwm_freq_value() with a valid parameter, but currently it
is the first call of get_blc_pwm_freq_value(NULL), and will return 0,
so "data_led.vbt" is always returned, regardless of the actual type of
the panel.
Combined with the previous commit, in this commit
mainboard_vbt_filename() will explicitly read EDID string via
gm45_get_lvds_edid_str() and use this string to call
get_blc_pwm_freq_value().
Resolves: https://ticket.coreboot.org/issues/475
Tested on my x200s with LTD121EQ3B (LED), and x200 with LTD121EWVB
(CCFL).
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I2e080b29321b6989d1f26b6c67876b3d703042f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74181
Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch updates the MTLRVP debug flash layout to optimize WP_RO to 4MB.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Increase to 7.5MB.
RW_LEGACY: Introduce with 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 2MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot intel/mtlrvp with FSP release and debug image.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie635e3cce1c3fd771e6a17e4b3c1bd700f4729bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch updates the Rex debug flash layout to optimize WP_RO to 4MB.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Increase to 7.5MB.
RW_LEGACY: Introduce with 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 2MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot google/rex with FSP release and debug image.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4ab69eb24937d58c8bc5d3c0a6e5cb70b843a1ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch updates the MTLRVP flash layout to optimize WP_RO to 4MB.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Reduce to 7MB.
RW_LEGACY: Reduce to 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 3MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot intel/mtlrvp with FSP release and debug image.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibd1ea7a3a2cd21928b8e33473c7bdddfad17c636
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch updates the Rex flash layout to optimize WP_RO to 4MB.
The idea is to create more space inside FW_RW_A/B to accommodate
multiple blobs to boot google/rex with different Intel MTL SoC stepping.
Changes for chromeos.fmd:
SI_BIOS:
RW_SECTION_A/B: Reduce to 7MB.
RW_LEGACY: Reduce to 1MB.
RW_MISC: Increased to 1MB.
RW_UNUSED: 3MB (reserved)
WP_RO: Reduce to 4MB
Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the
SPI Flash.
BUG=b:277143384
TEST=Able to build and boot google/rex with FSP release and debug image.
Change-Id: Iccf83b7bb66d0d5503e0ff9e9a819051296c6724
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74229
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sends the CSE EOP command asynchronous implementation early
as part of `soc_init_pre_device`.
Without this patch the duration between asynchronous CSE EOP send and
receive commands is not ample whichcauses idle delay while waiting
for EOP response.
The goal of the CSE async implementation is to avoid idle delay while
capturing the response from CSE EOP cmd.
This patch helps to create ample duration between CSE EOP command
being sent and response being captured.
TEST=Able to boot google/marasov EVT sku to ChromeOS and observed
~30ms of boot time savings (across warm and cold reset scenarios).
Without this patch:
963:returning from FspMultiPhaseSiInit 907,326 (97,293)
...
...
115:finished elog init 967,343 (2,581)
942:before sending EOP to ME 967,821 (478)
…
16:finished LZMA decompress (ignore for x86) 1,017,937 (12,135)
943:after sending EOP to ME 1,067,799 (49,861)
…
…
1101:jumping to kernel 1,144,587 (13,734)
Total Time: 1,144,549
With this patch:
963:returning from FspMultiPhaseSiInit 918,291 (97,320)
942:before sending EOP to ME 918,522 (230)
...
...
16:finished LZMA decompress (ignore for x86) 1,029,476 (12,483)
943:after sending EOP to ME 1,033,456 (3,980)
...
...
1101:jumping to kernel 1,111,410 (14,007)
Total Time: 1,111,375
Change-Id: Idaf45ef28747bebc02347f0faa77cc858a4a8ef1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This change enables PCIe x1 slot. In addition, it turns off 3.3v and
12v power and assert PERST# when suspend and turn on the power and
deassert the PERST# when resume for the x1 slot.
NOTE: Kconfig flag and required GPIO pins are already configured.
- /soc/intel/meteorlake/Kconfig
select SOC_INTEL_COMMON_BLOCK_PCIE_RTD3
- gpio.c:
/* GPP_A18: X1_PCIE_SLOT3_PWR_EN */
PAD_CFG_GPO(GPP_A18, 1, DEEP),
/* GPP_A19: X1_DT_PCIE_RST_N */
/* SRCCLKREQ: GPP_C12: SRCCLKREQ3_GEN4_X1_DT_SLOT3_N */
PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
BUG=b:224325352
BRANCH=None
TEST=Insert a SD card or NIC AIC on PCIe x1 slot and the AIC should
be detected and enabled at boot. For S0ix, run
'suspend_stress_test -c 1'. The RP6 should not cause any suspend and
resume issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Id2e92acf754569a22ea76a68c91aafce0075a742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73054
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIe bridges need to provide the LTR (latency tolerance reporting)
maximum snoop/non-snoop values so that they are inherited by downstream
PCIe devices which support and enable LTR. Without this, downstream
devices cannot have LTR enabled, which is a requirement for supporting
PCIe L1 substates. Enabling L1ss without LTR has unpredictable behavior,
including some devices refusing to enter L1 low power modes at all.
Program the max snoop/non-snoop latency values for all PCIe bridges
using the same value used by AGESA/FSP, 1.049ms.
BUG=b:265890321
TEST=build/boot google/skyrim (multiple variants, NVMe drives), ensure
LTR is enabled, latency values are correctly set, and that device
power draw at idle is in the expected range (<25 mW).
Change-Id: Icf188e69cf5676be870873c56d175423d16704b4
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74288
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
TEST=build/boot Windows/linux on drallion, verify touchscreen functional
in OS, dump ACPI and verify only i2c devices actually present on the
board have entries in the SSDT.
Change-Id: I3b91a628cd4a9edb5d5a7521529f39b75935e1d0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Ensure the GPIOs themselves are configured as level triggered, as well
as the devicetree entiures. I2C-HID spec requires LEVEL trigger, and the
drivers (both Linux and Windows) work better with LEVEL vs EDGE trigger.
TEST=tested with rest of patch train
Change-Id: I4fba55c938f401876798c2b32c5922523f32180f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For touchscreens on sarien, drive the enable GPIO high starting in
romstage while holding in reset, then disable the reset GPIO in
ramstage. This will allow coreboot to detect the presence of i2c
touchscreens during ACPI SSDT generation (implemented in a subsequent
commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I3ce7bfc0fa4c03c0bb96bebaa3c3d256f886ecc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
